Your Solution Partner

Transcription

1 Your Solution Partner 1

2 Short Presentation Elma & Elincom Elma Electronic is a global manufacturer of products for housing electronic systems. The company provides everything from components such as modular enclosures, cabinets and backplanes, up to complete standard or custom system platforms. Elma also manufactures precision rotary switches. 2

3 Short Presentation Elma & Elincom 3

4 Short Presentation Elma & Elincom Elma Trenew Electronic is represented in The Netherlands by Elincom Electronics since 1999 ELMA Trenew Electronic Germany, Pforzheim 4

5 CompactPCI goes High-Speed COMPARISON Compact PCI Plus/Serial vs. MicroTCA 5

6 History of PICMG Specifications DATA RATE PICMG 3.0 AdvancedTCA MTCA.0 MicroTCA PICMG CPCI S.0 CompactPCI Serial PICMG EXP.0 CompactPCI Express PICMG 2.0 CompactPCI PICMG 2.16 Packet Switching ABANDONED PICMG 2.30 CompactPCI Plus IO IN DEVELOPMENT TIME 6

7 CompactPCI Plus/Serial Short Overview An extension to the CPCI Standard which adds following features on the Backplane: PCI Express SATA USB ETHERNET Development started in January 2008 PICMG 2.30 RC 1.0 -CompactPCI Plus IO Specification Approved: September, 2009 PICMG CPCI S.0 -CompactPCI Serial Specification Started: April, 2009 Planned End: beginning of 2011 Actual Status: in balloting phase 7

8 Basic ideas MTCA cpci Plus/Serial Use of AMCs as daughter cards not anymore as mezzanines in ATCA Cost reduction: - Mechanic - Cooling - Management Still maintain the parallel cpci bus Use the same cpci mechanic Compared to CPCI adds High-Speed serial interconnection protocols like PCIE, SATA, USB, ETHERNET 8

9 Overview Mechanic MTCA cpci Plus/Serial New mechanic based on AMC Card formats Standard cpci mechanic based on 19 Technology, meaning unchanged: Smaller physical box size dedicated for size constrained applications Chassis Front Panel Handle Other accessories 9

10 Card Format MTCA AMC format with Card Edge Connectors cpci Plus/Serial Based on Eurocard format Same format used by standard cpci Several form factors available e.g.: Several form factors available e.g.: Single Module or Double Modules Compact-(3HP), Mid- (4HP) and Full-Size (6HP) Height: 3U or 6U Width: 4HP or 8HP 10

11 Rear I/O MTCA No Rear I/O specified cpci PLUS/SERIAL Rear I/O available No Rear I/O by MTCA therefore AMC - Front I/O Cards used for offering this feature 11

12 Rear I/O MTCA No Rear I/O specified Rear I/O available cpci PLUS No Rear I/O by MTCA therefore AMC - Front I/O Cards used for offering this feature Rear I/O available in XTCA 12

13 Rear I/O by XTCA MTCA XTCA 13

14 Connector MTCA cpci Plus/Serial Card Edge AMC connectors: PICMG 2.30 Slot: Press-fit SMD Compression mount 3M Connector only on the Card Module (no change on the backplane) Supports 5Gb/s Fully compatible with the standard cpci connector on the backplane 14

15 Connector cpci Plus/Serial cpci Plus.0 Slot, Peripheral Slots and Rear I/O: FCI Airmax Connector supports 12Gb/s and offers 184 pin pairs / 3U Board IEEE 1101 compliant Very robust and prepared for harsh environment (connector walled on four sides) The plug is on the card and the receptacle on the backplane: as in VME bus systems/contrary to cpci 15

16 Electrical Performance and Data Rates MTCA cpci Plus/Serial High speed serial point-to-point links on the backplane for extremely high data rates. Supported protocols: 10 Gb Ethernet up to 5Gb/s PCIE up to 5Gb/s SAS/SATA Serial Rapid IO Migrates from Parallel Bus to modern Serial Point to Point Topology Slot 1 Slot 2 Slot 3 Parallel bus structure + Serial Topology 16

17 Electrical Performance and Data Rates: MTCA 17

18 Electrical Performance and Data Rates: CPCI Serial 18

19 Electrical Performance and Data Rates: MTCA MTCA CPCI SERIAL 2 x MCH (MTCA Carrier Hard) up to 12 AMC (Advance Mezzanine Card) PCI-e Switching via MCH Maximum 1 x CPU Board Use of CPU Boards not limited (AMC1-12) No PCI-e Switching 19

20 Power Concept MTCA cpci Plus/Serial Power Module: should use the output backplane power connector in order to distribute radially the payload +12V and management +3.3V, so that each load can be managed independently of the others. Power Input: no dedicated connector, power interface of the cpci Plus modules through the slot pins. +12V is the main voltage of the cpci Serial modules Power Module from ERICSSON 20

21 Power Concept MTCA cpci Serial / Plus The Power Module should use INPUT Connectors which support AC or DC feeds Power dissipation: Power dissipation: 60W / Slot Power supplies +12V OUTPUT shall be used, pluggable or fix mount, but there is not possible to have a 1:1 use of the CPCI standard power supplies 48W / Single Modules 80W / Double Modules Power connector from ept 21

22 Management (Power and Cards) MTCA cpci Plus Central management and data switching via MicroTCA Carrier Hub New Power Module with management functionality necessary (but other solutions available to reduce costs) No central management specified All transactions are controlled by CPU

23 MTCA Power Management source Radially distrubuted (+12V) payload, each load can be managed independently of the others Management power (+3.3V) Point of load Gain +3.3V management power from +12V Micro controler Management for power module and cooling unit

24 MTCA vs. cpci Plus: Conclusions MTCA cpci PLUS/Serial Suitable for Telecom applications but Industrial solutions available as well For traditional cpci users with a need to use high speed protocols Intelligent management for all FRUs (Field Replaceable Units), such as the power module or cooling units Hot-swap management of all plug-in elements Various AMCs available Rear IO: not available by MTCA but available in XTCA For user who wants to use proven cpci cards and mechanic Proven system architecture Connector can be used in a rugged environment Rear IO: available No PCI-e Switching but Single Star PCI-e Switching 24

25 THANK YOU! 25

26 Your Solution Partner 26