Max Output Power [W] Max Channel Power [W] Max Output Channels. W: 500 x2 RGB: 200 x3 FEATURES LEGEND. Release: Arkalumen APT V1.

Transcription

1 Max Output Channels Max Output Power [W] Max Channel Power [W] Control over Driver Dim Current Dim/Channel Dim Minimum % DMX CCT/Intensity 0-10V CCT/Intensity DMX Channel Control Dim to Warm Programmable Motion Sense Zigbee Bluetooth MODULES Features: APT controllers add advanced control features to constant current (CC) and constant voltage (CV) drivers Integrated between the driver and LED light engines, the DC modules are powered directly from the driver Controlling between 2 to 5 output channels, CCT control can be calibrated precisely, independent of intensity APT Programmer enables in-factory and in-field changed to control settings and addresses Interface options for CCT, intensity or channel control include: DMX, 0-10V, IR, Zigbee, custom NEW: Dim-to-Warm Module (APT-DW) offers simple solution to replicate incandescent light SPECIFICATIONS Optional Features CONTROL FEATURES ADD-ON OPTIONS Order Codes APT-DW-2A * APT-CC-XA DXXY-IRXX-DMXY * APT-CC-XA DXXY-IRXX-DMXY * APT-CV2-XAYY-CXXX-DXXY-IRXX-DMXY % APT-CV3-XAYY-CXXX-DXXY-IRXX-DMXY % APT-CV5-XAYY-CXXX-DXXY-IRXX-DMXY % APT-CV5-HX-XAYY-CXXX-IRXX-DMXY NOTES: * = Dim minimum limited by driver specs 0000 = Feature disabled W: 500 x2 RGB: 200 x3 1% FEATURES LEGEND CODE XAYY CXXX DXXY IRXX CCTD / DMXY FEATURES Channels/Dim CC Output Daylight Harvest IR Control 0-10V Dimmer / DMX SETTINGS X=# of Active Channels (1-5), YY=Dim Min (%) XXX=Max Current Output per Channel (XXX0 ma) XX=Ambient Limit (XX0 fc), Y=Dim Sensitivity (0-9) XX=IR Program Code Enabled Y=# of Input Channels (1-2) Release: Arkalumen APT V1.4 (March 22, 2017) Arkalumen 1

2 Characteristics Input Output DC IN Current, Max. [ma] 4,160 OUT Current, Max. [ma] 4,160 DC IN Voltage, Range [V] OUT Voltage Range [V] DIM P/G Current, Max. [ma] 25 OUT Current Per Channel, Max. [ma] 4,160 DIM P/G Voltage, Max. [V] 10 OUT Voltage Per Channel, Max. [V] 60 COM A/B Current, Max. [ma] 25 Max Power (W) 100 COM A/B Voltage, Max. [V] 10 Efficiency [%] 99 Control Channels CCT Channel Mix Description Up to 5 channels APT-CC: Selection of CCT using ratio controlled channels APT-CV: Selection of CCT using current controlled channels 0-10V Dim Dimming using a 0-10V dimmer connected to the COM ports Daylight Harvest IR Control DMX Visual Light Comm Motion Sense Zigbee Bluetooth Power management based on set level of light required Dims on detected light and specified level of sensitivity Control via Infrared signals through programmed communication protocols including options by Lutron, Leviton, and Honeywell DMX wired communication via COM ports with up to 512 addresses Extended portion to be mounted external to fixture for in-field addressability 0-10V Dim disabled with DMX enabled Communication protocol via light for fixture monitoring and control Detection of movement within a set period of time If no movement detected in that period, dims output to specified level of intensity Zigbee wireless communication with up to 512 addresses Extended portion to be mounted external to fixture for in-field addressability and to mitigate antenna interference Bluetooth wireless communication with up to 512 addresses Extended portion to be mounted external to fixture for in-field addressability and to mitigate antenna interference Environmental Ambient Temperature, Range [C] Case Temperature, Max. [C] 105 Material Plastic Arkalumen 2

3 Wiring Diagrams APT-DW Figure 1 - APT-DW Dim to Warm configuration APT-CC Figure 2 - APT-CC Single 0-10V Dimmer Configuration Figure 3 - APT-CC Dual 0-10V Dimmer Configuration Figure 4 - APT-CC DMX Configuration Arkalumen 3

4 Wiring Diagrams APT-CV Figure 5 - APT-CV DMX Configuration Figure 6 - APT-CV Hub Configuration Figure 7 - APT-CV Phone App Configuration Arkalumen 4

5 Mechanical Drawings APT-DW APT-CC / APT-CV2 APT-CV3 APT-CV4 / APT-CV5 Dimensions [Inch] L W H APT-DW APT-CC / APT-CV APT-CV APT-CV APT-CV5-HX Arkalumen 5