Metalclad Plus Technical

Transcription

1 9 wiring devices surface Switchsocket Outlets Metalclad Plus A socket outlets comply with BS 6: Part : 99. Replacement fuses to the gang socket outlets comply with BS 6: 97. Electrical Voltage rating: 0V a.c. Current rating: A per socket outlet (except gang which is amp in total) Terminal capacity: Live, neutral & earth x.mm x mm x 6mm (standard) (Dual earth terminals on list os. K80, K977, K77, K077, K9, K0) Physical Ambient operating temperature: C to +0 C (not to exceed an average of more than C in any hour period) IP rating: IPXD Max. installation altitude: 000 metres A range of socket outlets designed for ease of installation and having all the advantageous design features of the Metalclad Plus range. The gang sockets with outboard rockers are of particular value for use by the infirm and partially sighted. on-standard clean earth sockets are for use on installations where restricted access is required and will only accept a 67WHI A non-standard plug with T-shaped earth pin. The sockets have two independent earth terminals so that they can also be used for clean earth installations. A variety of sockets (see ) are fitted with two earth terminals on a common busbar to provide a double earth facility for use when installations require a high integrity protective connection as specified within BS 767: 008. Round pin sockets A range of round pin sockets is also available, switched and unswitched. Moulded on indicator flash on switches will not rub off totally safe Optional neon indicators in the switch rockers with 7 visibility in the horizontal and vertical planes pin operated safety shutter Printed terminal markings on grey rear mouldings for clearer identification Top access, angled terminals make wiring easier and quicker mm minimum switch contact gap Double pole switching Choice of inboard or outboard positioned rockers Additional electrical safety from neutral make first, break last feature Switch contacts with silver contacts on both surfaces for good continuity Only one size of screwdriver required for installation Selection of products incorporating dual earth terminals for high integrity earthing Backed out and captive terminal screws on-standard clean earth sockets available

2 9 technical hotline + (0) surface wiring devices Socket Outlets Installation Metalclad Plus socket outlets can be wall or bench mounted. Do not mount or use as a trailing socket or where they may be subject to excessive moisture or dampness. gang switchsocket view from rear* Top-facing, angled, backed-out terminals make wiring easier and quicker. BOX TYPES Dimensions (mm) gang Flush Flush (for extra Surface Metal wiring space) gang ZIC 6ZIC as supplied gang ZIC 8ZIC as supplied gang 6 0 * gang switchsocket view from rear

3 96 wiring devices surface Key Operated Socket Outlet Metalclad A socket outlets comply with BS 6: Part : 99 Electrical Voltage rating: 0V a.c. Current rating: A Terminal capacity: Live, neutral & earth x.mm x mm x 6mm (stranded) Dual earth terminals Physical Ambient operating temperature: C to +0 C (not to exceed an average of more than C in any hour period) IP rating: IPXD Max. installation altitude: 000 metres Box Knockouts: gang 8 x 0 dia in top in bottom in each side in base The Key Operated amp socket is designed for ease of installation and has all the design features of the Metalclad Plus range. The built-in lock ensures that power cannot be provided without key operation making it ideal for public areas such as corridors. The key can be removed from the lock in the on or off position leaving the socket with or without power supply. The product can be quickly installed as a replacement for existing flush mounted amp sockets or in a new installation (assuming suitable 7mm deep mounting box is in position). ote: The lock fitted to each socket is universal. Backed Out, Captive Terminal Screws mm minimum gap across switch break Printed Terminal Markings Three Pin Operated Shutter Only one Size Screwdriver necessary for installation Dual Earth Terminals for high integrity earthing installations Key can be removed from the lock in the on or off positions Universal lock fitted to all product Supplied with Mounting Box

4 Flag below Reset (R) button. Red : O Black: OFF ALWAYS TEST BEFORE USE Press Test (T) button, Red flag should disappear. If it does not, do not use. Press Reset (R) after testing. 97 technical hotline + (0) surface wiring devices Sentrysocket RCD Protected Switchsocket Outlets Compliance with EC Directives, All Sentrysockets comply with the following EC Directives and are CE marked: Low Voltage Directive Electromagnetic Compatibility Directive (89/6/EEC) Sentrysocket RCD Sockets also comply with the requirements of the following standards: BS 788: 990 BS E 008-: 998 Sentrysocket RCD Double Sockets also comply with BS E 6: 996 and BS E 0-. Electrical Rated Voltage: 0V a.c. Current rating: A resistive Rated tripping current: 0mA and 0mA versions Terminal capacity: x mm for gang x mm for gang Physical Ambient operating temperature: C to +0 C IP rating: IPXD Max. installation altitude: 000 metres BOX TYPES Metalclad Plus Surface K897ALM (Spare Box) Metalclad Plus products have the mounting box included with the product. They are suitable for surface mounting only. Available for Single or Double Sockets. Sentrysocket provides a high level of protection against electrocution and gives further protection when used with appliances vulnerable to insulation damage, particularly when they are in damp environments or outdoors. Sentrysocket is not suitable for mounting in damp environments or outdoors. Sentrysocket, incorporating an RCD, is part of a complete range of fixed and portable wiring devices and circuit protection devices suitable for use in domestic, commercial and industrial applications. Active control circuit Sentrysocket products with an active control circuit incorporate a Re-set mechanism and are mains failure sensitive, i.e. they will function under all the normal conditions expected of an RCD, but will also trip in the event of a power cut or a sudden, dramatic reduction in mains voltage. This makes them ideal for use where it would be hazardous for equipment to suddenly energise after return of mains power, such as use with rotating machinery and heat developing apparatus. Passive control circuit Sentrysocket products with a passive control circuit incorporate a Stay-set mechanism and is mains failure proof, i.e. it will function under all the normal conditions expected of an RCD and will not trip in the event of a power cut. This makes it suitable for use with freezers or in inaccessible or unmanned locations. Suitable for most residential, commercial and light industrial applications Active and passive control circuit applications Comply fully with current Wiring Regulations Double pole switching Dimensions (mm) Single socket Flexible and versatile in use Ideal for use with equipment subject to wet weather or high humidity Part of a complete range of MK circuit protection devices They are a.c. and pulsating d.c. sensitive for residual current Double socket Installation Sentrysocket outlets can be wall or bench mounted. Do not mount or use as a trailing socket or where they may be subject to excessive moisture or dampness. T test before use press button - T white off (tripped) red on on active control device trips with loss of mains 0mA tripping current sentrysocket rcd protected T R sentrysocket rcd protected

5 98 wiring devices surface Sentrysocket Installation Flush mounting steel wall box It should be noted that some of the conduit entries may be restricted, depending upon their positions and the depth of box used. Socket Testing: Single Socket Testing After installation, turn the mains electricity supply on. To test that the Sentrysocket is functioning correctly:. Ensure that no appliance is connected to the Sentrysocket. Switch Sentrysocket on: The switch should remain closed and the red flag will appear in the window. If the switch fails to remain closed, check that the Supply L and connections are not reversed or the Supply connection is not open circuit. If the Sentrysocket is correctly connected and still trips after being switched on, the Sentrysocket is faulty and should not be used. If the Sentrysocket stays on, press the test button: The switch will open and the white flag will appear In the window. If the Sentrysocket does not trip and there is mains voltage present at the socket outlet, Sentrysocket is faulty and should not be used.. Switch Sentrysocket on: Connect an RCD tester and ensure that the Sentrysocket trips within the specified time: 00 ms AT RATED TRIP CURRET 0 ms AT x RATED TRIP CURRET If the Sentrysocket does not trip within the specified times then the product is faulty and should not be used (If more than one RCD is in series then there is no guarantee as to which device will trip first).. Reset all tripped RCD s including the Sentrysocket.. Switch off the mains supply switch disconnector. On mains failure, a Sentrysocket with Active Control Circuit will trip, whilst a Sentrysocket with Passive Control Circuit will not trip. If the Active Control device does not trip, it is faulty and should not be used see note below. If no faults have been found then installation testing has been completed successfully. ote: If a fault is identified at any stage of installation testing procedure do not use Sentrysocket, and contact your local electrician, or your local MK stockist. Double Socket Testing After installation, turn the mains electricity supply on. To test that the Sentrysocket is functioning correctly follow the steps to below:. Ensure that no appliance is connected to the Sentrysocket.. Reset Press the button marked R (for Reset) the contact status indicator should show red, indicating that the socket outlets are now live (if the switches are in the O positions).. Test Press the TEST button marked T (for Test), the product should trip with the contact status indicator showing black. In this state the socket outlets are disconnected from the supply.. Reset Press the button marked R again, the contact status indicator should show red.. Connect an RCD Tester to either socket outlet and ensure that the Sentrysocket trips with the specified times below: 00 ms AT RATED TRIP CURRET 0 ms AT x RATED TRIP CURRET 6. Reset the Sentrysocket as in step above. 7. Switch off the Mains Supply Switch Disconnector. 8. A Sentrysocket with Active Control Circuit should trip while a Sentrysocket with Passive Control Circuit should not trip. If all the operations in steps to 8 above give correct results, the Sentrysocket RCD socket outlet is safe to use. If the procedures in steps to 8 above are not completed correctly, do not use the Sentrysocket product and seek professional advice or contact the MK Technical Sales and Service department on + (0)

6 99 technical hotline + (0) surface wiring devices Round Pin Socket Outlets Round pin socket outlets comply with BS 6: 90. Electrical Voltage rating: 0V a.c. Terminal capacities: amp sockets (K8): 7 x mm x.mm x.mm x mm amp sockets (K8): x.mm x mm x 6mm (stranded) amp sockets (K8): x.mm x mm x 6mm (stranded) Physical Ambient operating temperature: C to +0 C (not to exceed an average of more than C in any hour period) IP rating: IPXD Max. installation altitude: 000 metres A range of round pin socket outlets designed for ease of installation and having all the advantages and design features of the Metalclad Plus range. These products can be quickly installed as replace ments for existing socket outlets or in new installations. Top access terminals make wiring easier and quicker Integral O indicator on switches will not rub off totally safe mm minimum switch contact gap Double pole switching Terminal screws backed out Additional electrical safety from neutral make first, break last feature on switched sockets Switch contacts with silver contact points on both surfaces for good continuity A and A sockets contain a pin operated safety shutter Printed terminal markings on grey rear mouldings for clearer identification A socket shuttered Installation Dimensions (mm) Metalclad Plus socket outlets can be wall or bench mounted do not mount or use as a trailing socket or where they may be subjected to excessive moisture or dampness. 9 Cable management Metalclad Plus socket outlets can be mounted in a variety of MK trunking systems. 60. Depth Amp sockets: mm Amp sockets: mm Amp sockets: mm 7

7 600 wiring devices surface A American Socket Outlet Complies with SASO 0: 00 A American Electrical Voltage rating: 7V a.c. Current rating: A Terminal capacity: Live, neutral & earth x.mm x mm x 6mm (stranded) Dimensions (mm) 6 0 Physical Ambient operating temperature: C to +0 C (not to exceed an average of more than C in any hour period) IP rating: IPXD Max. installation altitude: 000 metres Installation Metalclad Plus socket outlets can be wall or bench mounted. Do not mount or use as a trailing socket or where they may be subject to excessive moisture or dampness.

8 60 technical hotline + (0) surface wiring devices Connection Units and 0A DP Switches Connection Units comply with BS 6 Part : 99. 0A DP switches comply with BS E : 999. Fuses are to BS 6. Electrical Voltage rating: 0V a.c. Current rating: Connection units amp DP switches 0 amp Terminal capacity: Supply terminal: x 6mm stranded x mm x.mm Load terminals: Flex Outlet Cord grip capacity: Connection units: x 6mm stranded x mm x.mm min: core, 0.mm max: core,.mm 0 amp DP switches: min: core,.mm max: core,.mm Physical Ambient operating temperature: C to +0 C (not to exceed an average of more than C in any hour period) IP rating: With flex outlet: IPXD Without flex outlet: IPX Max. installation altitude: 000 metres A range of A fused connection units and 0A DP switches designed for the connection of refrigerators, water heaters, central heating boilers and other fixed appliances. The ranges are designed for ease of instal la tion and have the advantageous design features of the Metalclad Plus range. eon indicators eon indicators can be included in the rockers of the switched connection units. In the case of unswitched units, they are located centrally and uppermost on the face plate. eon indicators are integrally wired into the product and do not require separate connection when installing. The design gives 7 visibility in the horizon tal and vertical planes. Fuse carriers These are captive and are opened by a fast acting, screwdriver operated worm drive for ease of replacement. A tamper-proof version is also available. Fuse carriers can be locked open using a padlock, List o. K000. Flex outlets The products are equipped with very strong, push-fit nylon cord grips making installation safe, quick and easy.

9 60 wiring devices surface Connection Units and 0A DP Switches Optional indicators in the switch rockers with 7 visibility in the horizontal and vertical planes Worm-drive operated fuse carriers for additional security (tamper-proof version available) Fuse carrier lockable in open position All supply and load cables can be cut and stripped to the same length Integrally wired indicators save installation time Push-fit cord grips, for safer, quicker installation Angled, top mounted terminal screws simplify wiring Moulded on indicator flash on switches cannot rub off totally safe Captive fuse carrier Additional electrical safety from neutral make first, break last feature Secure cable and flexible cord connection All terminal and fixing screws operated by one-size (mm) screwdriver Backed out and captive terminal screws Front outlet cord grip Box types Supplied with a box having x 0 mm knockouts in one side, as well as x 0 mm knockouts in each of the other three sides and the bottom of the box. Spare boxes are available without side knockouts (K89 ALM). All boxes have a knockout in the base. Dimensions (mm) Lockable fuse carrier 9 Installation Metalclad Plus connection units and 0A cable outlets and switches can be wall or bench mounted. Do not use on a trailing lead. fuse Wiring Products must be installed in accordance with current IEE Regulations. dia 60. 9

10 60 technical hotline + (0) surface wiring devices Plateswitches All Metalclad Plus plateswitches comply with BS E : 999. Electrical Voltage rating: 0V a.c. 0Hz Current rating: 0 amps no derating when used on fluorescent or inductive loads Terminal capacity: All products x mm x.mm x.mm x mm x 6mm Contact gap: mm switch contact gap Physical Operating temperature: C to +0 C IP rating: IPX A comprehensive range of tough, impact resistant, surface mounted plateswitches. They have been designed to suit a wide variety of applications in factories, workshops, plant rooms, warehouses, schools and hospitals. The frontplate has smooth chamfered edges engineered to fit flush with the backbox. Backboxes with or without side knockouts are available and all have a central knockout in the base. Wide rocker switches are also available. Max. installation altitude: 000 metres Operational testing (all plate switches): tested to 00,000 operations for mechanical life tested to 0,000 operations at 0 amp rating Two way switches can be wired as one or two way All products clearly printed with BS os., ratings, etc Matching Grid switches available in 0 or 0A ratings mm switch contact gap Positive switch action Top access, backed out and captive terminal screws Metalclad Plus is supplied with white inserts only An earth terminal is provided attached to rear of product and in base of mounting box BOX TYPES Flush Surface All, and gang switches 99ZIC K60WHI All these products are designed primarily for surface mounting and are supplied complete with mounting box. If flush mounting is required then recommended box is 99ZIC 6mm deep.

11 60 wiring devices surface Plateswitches Dimensions (mm) gang gang gang 9 Wiring Diagrams One-way switching Common L Lamp/s Two-way switching wire control Wide rocker 9 L Common Two-way switches Common Lamp/s Dotted lines show alternative switch positions Two-way switching plus intermediate switching wire control Common Common L Two-way switch Intermediate switch Two-way switch Lamp/s Dotted lines show alternative switch positions Two-way switching wire control Common Common L Lamp/s SW.L Two-way switches Dotted lines show alternative switch positions Two-way switching plus intermediate switching wire control Common Common L Lamp/s SW.L Two-way switch Dotted lines show alternative switch positions Intermediate switch Two-way switch.b. Terminal positions may alter. The above diagrams are to show wiring layout.

12 60 technical hotline + (0) surface wiring devices Key Operated Switch All DP switches in the range conform to BS E : 999. Electrical Voltage rating: 0V a.c. 0Hz Current rating: 0 amps Terminal capacity: All products x mm x.mm x.mm x mm x 6mm Contact gap: mm switch contact gap Physical Operating temperature: C to +0 C IP rating: IPX Max. installation altitude: 000 metres Lockable additions to the extensive Metalclad Plus range of products. 0A DP Key Operated Switch Complies with BS E and should not be used as an isolator Backed Out, Captive Terminal Screws mm minimum gap across switch break Printed Terminal Markings Only one Size Screwdriver necessary for installation Key can be removed from the lock in the on or off position Universal lock fitted to all products Supplied with Mounting Box

13 606 wiring devices surface High Current Switches All DP switches in the range conform to BS E : 999. Electrical Voltage rating: 0V a.c. Current: A Switch 0A Switch (resistive) Switch: mm contact gap Double pole operation Terminal capacity, A Switches x mm x 6mm x 6mm Terminal capacity, A Switch: x.mm x mm x 6mm Physical Ambient operating temperature: C to +0 C (not to exceed an average of more than C in any hour period) IP rating: IPX Max. installation altitude: 000 metres A range of switches and cooker control units harmonising with the Metalclad Plus style, suitable for the switching of all domestic, commercial and industrial appliances where higher current ratings are required, i.e. cookers, heaters etc. Metal units are particularly suitable for refurbishment projects. Positive switch action Positive double pole switching Toggle action switches Very robust paint finish Metal frontplates Replaceable neon indicators ote: These switches are not recommended for switching large banks of PCs Box types A switch supplied with a box having x 0mm knockouts in one side, as well as x 0mm knockout in each of the other three sides and the bottom of the box. 0A switch supplied with a box having x 0mm knockouts in one of the long sides and x 0mm knockouts in the other. Both short sides and the bottom of the box have x 0mm knockout. Spare boxes are available for both size of product with no knockouts in any of the sides (K89ALM for A, K80ALM for 0A). A knockout is retained in the bottom of each box. BOX DEPTHS BOX REFERECES List o. Max. cable size Flush Surface Flush A 0A Switches Box depth A 0mm 6mm 0mm 6mm 877ZIC 0A 0mm 7mm 0mm 7mm 878ZIC Dimensions (mm) K0 K off on off 7 on 60

14 607 technical hotline + (0) surface wiring devices Three Pole Fan Isolators Comply with BS E 6097: 99. Electrical Voltage rating: 0V a.c. 0Hz Current rating: 0 amps Terminal capacity: x mm x.mm x.mm x mm x 6mm Contact gap: mm switch contact gap Classifications Method of operation: Stored energy operation Suitability for isolation: Suitable for isolation Ratings Utilisation category ACB Rated operational voltage (Ue) 0V Conventional free air thermal current (Ith) 0A Rated frequency 0Hz Rated making capacity 00A rms Rated breaking capacity 80A rms Rated conditional short-circuit current 6000A rms (with supply side protective device GEC IT 6 BS88: part : 988 6A 0VAC utilisation category gg 80KA breaking capacity fuse links.) Physical The MK Three Pole Fan Isolator provides a safe and simple method of isolating mechanical fan units and is particularly useful in bathrooms, toilets, storerooms and basements where there is little or no natural light. For example, timer controlled fans are often linked into the lighting circuit for energy saving and convenience. In such an installation there is often a need for the lighting circuit to remain live to provide light whilst the fan unit is externally isolated so that routine maintenance and repairs can be carried out in complete safety. The K87 fan isolator can be used as a double pole or triple pole isolator. In addition it includes a clear on/off indicator and the frontplate features a fan isolator symbol for easy circuit identification. Dimensions (mm) on isolator off Operating temperature: C to +0 C IP rating: IPX Max. installation altitude: 000 metres Switchlock list no. K88 is available to allow the isolator to be locked in the disconnected position to facilitate fan maintenance

15 608 wiring devices surface Three Pole Fan Isolators Wiring Diagrams Two pole switching for fan units without timers L Supply TOP L L L L Rear view of Fan Isolator To Fan Unit without Timer (see Fan Unit Intructions) L (switched) L Supply TOP L L L L Rear view of Fan Isolator To Fan Unit without Timer (see Fan Unit Intructions) L (switched) Three pole switching for fan units incorporating timers L Supply TOP L L L L Rear view of Fan Isolator To Fan Unit with Timer (see Fan Unit Intructions) L (unswitched) L (switched) L Supply TOP L L L L Rear view of Fan Isolator To Fan Unit with Timer (see Fan Unit Intructions) L (unswitched) L (switched)

16 609 technical hotline + (0) surface wiring devices Euro and LJU6C Data Frontplates BS 7: 00 Dimensions Height: mm Width: mm (G) 6mm (G) Depth: 9mm Aperture Dimensions (ominal) Euro Frontplates Height: 0mm Width: 0mm (G) 00mm (G) LJU6C Frontplates Frontplates used for mounting snapfit data modules. Dimensions (mm) Euro Frontplates 6 9 Height: 7mm Width: mm G and G Euro frontplates G LJU6C frontplate Metalclad Plus style module K8 module K8 module K8 Accept industry standard Euro or LJU6C snapfit modules K8 Euro frontplate accepts Euro module, ( x 0mm aperture) K8 Euro frontplate accepts Euro modules, (0 x 0mm aperture) LJU6C Frontplates 9 K8 Euro frontplate accepts Euro modules, (00 x 0mm aperture) K7 LJU6C frontplate accepts two LJU6C modules (7 x 7mm apertures) module (. x 0mm) blank available for Euro frontplates Interchangeable modules clip into frontplate 60. module K7

17 60 wiring devices surface RJ Data Outlets ISO/IEC 80 E 07 TIA 68 E 00 Installation Maximum cable length 90m. Suitable for use in all LJU6C, Euro and MK Modular frontplates, available in the Logic Plus range, Cat e and Cat 6 modules suitable for use in structured cabling distribution systems. Cable bend radii, 0mm during installation, 0mm after installation. TIA WIRIG SCHEME COLOUR CODES: Pin o. 68A 68B P P Maximum pull force 8.7kg. WHITE / green WHITE / orange Do P P P P P P not over tighten cable ties. GREE / white ORAGE / white Do not unwind the twists in the wire pairs by more than mm max. WHITE / orange WHITE/ green D E F G H BLUE / white BLUE / white 68A 68B WHITE / blue WHITE / blue Euro and LJU6C modules are to be wired as follows F G H RJ Cat.e Euro K8 Installation details and wiring diagram illustrations B C D E A 6 ORAGE / white GREE / white Pair BLUE/white & WHITE/blue 7 WHITE / brown BWHITE / brown Pair ORAGE/white C & WHITE/orange Pair GREE/white & WHITE/green D 8 BROW / white BROW / white Pair BROW/white & WHITE/brown 6 RJ Cat.e Euro - Angled K A B C D RJ Cat.6 Screened K76S - LJU6C, K86S - Euro RJ Cat.e LJU6C K RJ Cat.6 Euro - Angled K76 - LJU6C K86 - Euro, K - Euro Angled 6 RJ Cat.e Screened K8S - Euro

18 6 technical hotline + (0) surface wiring devices Telephone, RJ/, BC Data and Blank Modules Telephone sockets K80 and K8 comply with the following: BS 6:. Data sockets K80, BS 7: 00 (where applicable). K887 complies with FCC68 and E 00. Electrical Cable types: Telephone: CW, CW9, CW08, CW6 o. of cables per termination: Telephone: RJ/: BC 0 Ohms impedance cable RG8, RG, URM Belden 9907 Frequency range: BC connector: 0 to GHz Impedance: BC Connector: 0. nominal Termination type: Telephone module IDC BC module Crimped connection Physical Temperature range: Ambient air 0 C to +60 C IP rating: IPXD K80, K8, K80 and K787. IPX K80, K88, K and K70 Max. installation altitude: 000 metres A range of telephone, data and blank modules to fit Euro and LJ6UC front plates. BC Euro modules with a 0Ohm crimp connector suitable for use with RG8, URM, URM76 and Beldon 9907 type coaxial cables are also available. Installation (Telephone socket modules) Product performance, systems compatibility Master Sockets: For use as the first socket outlet on a direct exchange. They contain the required surge protector (for line protection against electrical surges) and ringing capacitor. Secondary Sockets: for use as extension sockets when connected on the same line as a Master Socket. Installation tools required IDC Connectors (telephone & RJ outlets) MK insertion tool List o. 00AT. Wire pull-out force: 0. ewtons when installed correctly. Wiring regulation restrictions Domestic Installations: The total RE (Ring Equivalent umber) value of all telephone equipment connected on a line must not exceed. Meet all relevant BS, OFTEL and cabling standards Interchangeable modules clip into frontplates Front fixing facilitates easy exchange of modules Part of a complete range of products for telephone and data processing requirements Telephone sockets 00% tested before delivery Quick, simple and reliable IDC connectors Can be specified for all applications Data sockets Latest specification for high performance systems Made to stringent quality assurance procedures Wide range of data connectors available For information on TV Satellite and FM Modules see pages 6-6.

19 6 A B C wiring devices surface Telephone, A RJ/, BC B Data and CBlank Modules D E Telephone Wiring Scheme GREE / white BLUE / white ORAGE / white WHITE / orange WHITE / blue 6 WHITE / green ote: Main wire colour is shown in capitals 6 First Socket Outlet Master 6 6 Extension Outlet Secondary 6 6 K80 6 K C D E F G H RJ/ Wiring Scheme PI STRIPPED COLOUR SOLID COLOUR O. WIRE WIRE 6 WHITE / green WHITE WHITE / orange BLACK BLUE / white RED 6 WHITE / blue GREE ORAGE / white YELLOW 6 GREE / white BLUE MODIFICATIO TEXT: ote: Main wire colour is shown in capitals007 K K887 6 A B C MODIFICATIO TEXT: A B C UITS R MK ELECTRIC (MALAYSIA) SD. BHD C/O SYMPHOY CORPORATEHOUSE SD.BHD D FLOOR, MEARA EO BAK 88, JALA RAJA LAUT 00 KUALA LUMPUR HOEYWELL COFIDETIAL AD PROPRIETARY PROTECTED BY DI ISO 606 FIRST AGLE PROJECTIO DRAW BY: MM GEERAL TOLERACES: LIEAR ±0. HOLE DIA ±0.08 RADII ±0.0 AGULAR ±0.0 DIMESIOS AD TOLERA BRITISH STADARD ECC EGIEERIG STA MATERIAL FIISH PACKAGIG SPEC o: PERMIT o: IMPRESSIOS: DRAW BY DATE: MODIFICATIO TEXT: R MK ELECTRIC (MALAYSIA) SD. BHD C/O SYMPHOY CORPORATEHOUSE SD.BHD D FLOOR, MEARA EO BAK 88, JALA RAJA LAUT DIMESIOS AD TOLERACES PER BRITISH STADARDS AD ECC EGIEERIG STADARDS EVIROMETAL & COMBUSTIO COTROLS

20 6 technical hotline + (0) surface wiring devices Digital TV and Radio Outlets All MK Digital TV Outlets comply with BS 7 and BS E 008 where applicable. Also IEC 69-, BS E and BS 6 Part. Modular products are Euro compatible. Single Outlets TV/FM IEC Male or Female SATF-Type Diplexer and Triplexer products TV Diplexer: Triplexer: FM Diplexer: Triplexer: SAT Diplexer: Triplexer: -6MHz 70-MHz -6MHz 70-MHz MHz MHz n/a 90-00MHz DC-90MHz DC-.7GHz TV/FM/DAB/SAT products for digital radio TV There are two ranges of diplexer and triplexer products, an established range suitable for VHF TV, and a range suitable for digital radio (DAB). Diplexer modules are for connecting to a single co-axial aerial down lead carrying combined TV and FM signals. The filtering in the diplexer splits out the appropriate signal and feeds it to the relevant output connection. A DC control path is provided in the TV signal path through the diplexer. Triplexer modules are for connecting to a single co-axial aerial down lead carrying combined TV, FM and SAT signals. The filtering in the triplexer splits out the appropriate signal and feeds it to the relevant output connection. A DC control path is provided in the SAT signal path through the triplexer. The quad outlet contains a triplexer together with a separate satellite output, for use with Sky+, or more complex installations. Installation When installing the TV Co-axial cable ensure that all cable bends are smooth so that the inner insulation is not crushed or squashed. Otherwise the TV signal quality may be affected. ot suitable for loop-in loop-out installations use CT00 cable (or equivalent.) Diplexer: Triplexer: -6MHz 70-MHz -6MHz 70-MHz Dimensions (mm) TV Co-axial cable stripping details FM/DAB Diplexer: Triplexer: SAT or SAT 87.-0MHz 87.-0MHz Euro module (monobloc) 0 8 Screening braid to remain in place over the inner insulation Diplexer: Triplexer: n/a 90-00MHz SAT Diplexer: Triplexer: n/a -00MHz 0 Earth terminal Cable clamping plate on Isolated Fully screened Euro module (monobloc) 8 Co-axial cable Foil EMC screening gasket Clamping plate fixing screws Earth terminal provided on TV modules Earth terminal Cable management Digital TV outlets can be mounted in a variety of MK trunking systems. 0 View with cable clamp removed ote: Minimum box depth: 7mm Co-axial cable Clamping fixing screws Cable clamp

21 6 wiring devices surface TV/FM and Satellite Socket Outlets Installation (TV sockets) Product performance, systems compatibility FM DAB TV Isolated Outlets are intended for use where safety isolation (rated at 000V ac) is required to provide protection against faults occurring within any mains powered product used on different parts of the distribution system. They are not suitable for use in systems where DC signals are passed through the socket, (e.g. where masthead/headend equipment is controlled by receiver/ decoder equipment). TV DIST SAT Diplexer Outlets are used in distribution systems where both TV and FM band signals are combined on a single aerial downlead. The filtering in the diplexer separates the appropriate signals and feeds them through to the relevant output connection port. Cable Routing and Use of Cable Clamp Sharp bends in the cable must be avoided during installation. The single TV/ FM socket is fitted with a cable clamp that can be fixed on either side of the termination position to facilitate this. TV VID TV TV HI-FI SAT When tightening the screening braid clamps ensure that the cable is firmly gripped and that the inner insulation is not squashed flat beyond a slight oval shape. TV VID SKY/DIG Safety Information TV outlets or modules must not be installed in the same enclosure as equipment rated in excess of 0V, (e.g. mains rated A sockets or switches). Method of installation of TV and FM aerial connection by using MK co-axial socket outlet and only one downlead. Conventional distribution system for TV and FM signals using a single aerial downlead. The signals from the TV and FM aerials and the satellite dish are combined together using two products. The first combines the TV and FM signals and the second adds the Sky signal to the TV/FM signal and provides a DC control path to power the LB unit on the satellite dish. (These products are not supplied by MK). The single aerial down lead feeds into the triplexer (black lines in wiring diagram). The separated satellite signal is then fed to the decoder. The decoded satellite signal is then fed into the VCR along with the TV signal from the Triplexer. The output signal from the VCR then feeds into the TV and also back to the single outlet and onto the distribution amplifier (black lines in wiring diagram). The single cable back-feed then feeds back to the input of a multi way distribution amplifier, (typically located in the loft or garage) (red lines in wiring diagram). Each individual output from the distribution amplifier is then fed to the individual rooms in the house to a standard TV (single or diplexer) outlet to which the TV/VCR and/or Hi-Fi can be connected (blue lines in wiring diagram).

22 6 technical hotline + (0) surface wiring devices MK Modular Datacoms Metalclad Telephone and Data sockets comply with the following: Telephone sockets K and K7 BS 6:., OFTEL Approval S/G//L/0000 Data sockets K90, K, K, K, K7, K8 BS 7: 00 (where applicable) Data sockets K Cat e performance to EIA/TIA TSB68, BS E 07, IEC80 Electrical Cable types: Telephone CW, CW9, CW08, CW6 RJ: 0 to 6 AWG, 00 ohm Cat e UPT cable o. of cables per termination (Telephone &RJ): Telephone: RJ: Termination type: RJ & telephone module IDC Physical Temperature range: Ambient air 0 C to +60 C A unique modular system in the distinctive Metalclad Plus style comprising a range of socket modules for Data and Telephone use, with to matching frontplates capable of accepting combinations of interchangeable modules. Modules clip into mounting frames which, when attached to frontplates, provide a high degree of versatility, making the system ideal for use in all commercial and industrial applications. IP rating: IPXD Max. installation altitude: 000 metres Meet all relevant BS, OFTEL and cabling standards Part of a range of products for telephone and data processing requirements Interchangeable modules clip into grid frame which attaches to frontplate Telephone sockets and frontplates Quick, simple and reliable IDC connectors Can be specified for all applications Data sockets and frontplates Cat e specification performance Made to stringent quality assurance procedures Dimensions Data and TV modules (mm) (Minimum box depth 6mm) K / K / K7 / K8 K90

23 66 wiring devices surface MK Modular Datacoms Dimensions Modular frontplates (mm) 6 Installation (Data sockets) RJ modules In order to maintain Category e performance, install cabling in accordance EIA/TIA or ISO General Cabling Standards. Installation (Telephone socket modules) 60. module K9 module K Product performance, systems compatibility Master Sockets: For use as the first socket outlet on a direct exchange. They contain the required surge protector (for line protection against electrical surges) and ringing capacitor. Secondary Sockets: for use as extension sockets when connected on the same line as a Master Socket. Installation tools required IDC Connectors (telephone & RJ outlets) MK insertion tool List o. 00 or 60. Wire pull-out force: 0. ewtons when installed correctly. 60. module K9 RJ Wiring Scheme PI STRIPPED COLOUR SOLID COLOUR O. WIRE WIRE WHITE / green White WHITE / orange Black BLUE / white Red WHITE / blue Green ORAGE / white Yellow 6 GREE / white Blue ote: Main wire colour is shown in capitals module K Rear View of Terminal Connection Block Wiring regulation restrictions Domestic Installations: The total RE (Ring Equivalent umber) value of all telephone equipment connected on a line must not exceed. Industrial and commercial installations: MK telephone sockets are suitable in all situations after the PBX/PABX has been installed by a recognised installer. For key systems and other special systems, the manufacturer s instructions should be referred to. Safety information one of the above products should be installed into the same fixing or mounting boxes as mains rated equipment or cable. ote: For Telephone and RJ wiring scheme diagrams see pages 6-6. BOTTOM Cable management Metalclad Plus Modular Data and Telephone Sockets can be mounted in a variety of MK trunking systems. See main catalogue for further details.

24 67 technical hotline + (0) surface wiring devices Grid Plus Front Plates BS 7: 00 Grid Plus is a comprehensive modular switching and monitoring system ideal for a variety of applications within the commercial, public and domestic sectors. Dimensions 6 6 module K9 module K9 module K9 module K module K96 8 module K98 9 module K module K0 8 module K08 module K