Making the automation of roller shutters and sun protection systems easier.

Size: px

Start display at page:

Download "Making the automation of roller shutters and sun protection systems easier."

Doreen Randall
6 years ago
Views:

1 Making the automation of roller shutters and sun protection systems easier. Complete catalogue for drives, control units and accessories from BECKER.

2 Our greatest strength: finding ways to make your job that much easier.

3 Table of contents Drives 12 DRIVES Control units 74 CONTROL UNITS Electrical accessories 162 Mechanical accessories 178 Appendix 226 ELECTRICAL APPENDIX MECHANICAL

New items in this catalogue Escape door kit HCS520 20 Roller shutter solar set for the operation of roller shutters independently of mains power RSS541 21 Roller shutter drives with electronic limit

4 New items in this catalogue Escape door kit HCS Roller shutter solar set for the operation of roller shutters independently of mains power RSS Roller shutter drives with electronic limit switching R8-E02... R30-E02 P5-E03... P9-E03 / R8-E03... R30-E03 R8-E14... R40-E Sun protection drives with electronic limit switching P5-E12... P9-E12 / R8-E12... R50-E12 / L50-E12... L120-E12 R8-E15... R40-E15 / L50-E15... L120-E Sun protection drives for locking systems with electronic limit switching P5-E16 P9-E16 / R8-E16...R40-E16 / L50-E16...L120-E16 46 ZIP/Fixed Screens sun protection drives with electronic limit switching P5-E18... P9-E18 / R8-E18... R40-E18 50 Universal sun protection drives with integrated radio receiver P5-C12... P9-C12 / R8-C12... R50-C12 / L50-C12... L120-C12 52

5 Sun protection drives for locking systems with integrated radio receiver P5-C16... P9-C16 / R8-C16... R40-C16 / L50-C16... L120-C16 54 ZIP/Fixed Screens sun protection drives with integrated radio receiver P5-C18... P9-C18 / R8-C18... R40-C18 56 EasyControl EC711, EC715 EC141-II, EC145-II, EC241-II, EC245-II EC611 SunWindControl SWC445-II 5-channel hand-held transmitter with sun and wind threshold value setting 78 94, DRIVES VarioControl VC180-II / VC280-II Radio socket SensorControl SC911 Radio sun/wind/rain sensor CONTROL UNITS B-Tronic radio control units KNX-RF Radio receivers Accessories Radio transmitters Mechanical accessories Drive adapter DW85N Shaft clamp S50 Star adapter BS adaptation kit for R series Wall bracket with ZF/ZF2 catch dapter plate K with pins up to m dapter ange K up to m ELECTRICAL APPENDIX MECHANICAL

6 Glossary drives Mechanic Limit Switch M04 C M M Roller shutter and sun protection drive with mechanical limit switching M05 HK HK Roller shutter and sun protection drive with crank connection M06 G G drive, diameter mm M07 GHK GHK DC drive with crank connection M17 Roller shutter drives for narrow windows M19 drive, diameter mm ico Electronic Limit Switch E01 C PRO+ C PR+, PR+, Pico R+ Universal roller shutter drive with electronic limit switching E02 RO+ Roller shutter drive with electronic limit switching E03 ROP+ RP, RP+, R, R+ Roller shutter drive with electronic limit switching E12 Current drive name Previous drive name C PS, C PS+, SE B0 Equates old drive name PS, PS+, S, S+ Description Universal sun protection drive with electronic limit switching E14 Roller shutter drives with electronic limit switching E15 Sun protection drives with electronic limit switching E16 C SE I1 Locking sun protection drive with electronic limit switching E18 Sun protection drive ZIP with electronic limit switching Radio controlled drives with electronic limit switch Centronic C01 C PROF+ PROF+, PRF+ Roller shutter drive with integrated Centronic radio receiver C12 C PSF+, C PSF PSF+, PSF Sun protection drive with integrated Centronic radio receiver C16 C SEF I1 Locking sun protection drive with integrated Centronic radio receiver C18 Sun protection drive ZIP/Fixed Screens with integrated radio receiver Centronic Bidirectional radio-controlled drives with electronic limit switch B-Tronic B01 C PROF+ KNX Roller shutter drive with integrated B-Tronic radio receiver Drives with SMI-Technology S01 C PR+ SMI Roller shutter drive with SMI limit switching S12 C PS SMI, C PS+ SMI Sun protection drive with SMI limit switching S18 Sun protection drive ZIP/Fixed Screens with SMI limit switching Example: P E 03 Diameter Torque Speed Limit switching Functional range

Together it s easier. That s the philosophy behind our ideas and what we do. Dear Customer, Dieter Fuchs Managing Director We want our solutions to make things easier for people.

7 Together it s easier. That s the philosophy behind our ideas and what we do. Dear Customer, Dieter Fuchs Managing Director We want our solutions to make things easier for people. Apart from the high quality of our drives and control units for roller shutters and sun protection systems, one thing above all is invaluable to us: The knowledge that, in you, we have a strong partner at our side. So in this catalogue we also want to make your work and your project planning easier. If you have any questions or suggestions about our products, just call us. We would be happy to work with you to make building automation even easier. Yours sincerely DRIVES CONTROL UNITS ELECTRICAL Dieter Fuchs P.S.: Do you know about our BECKER academy? We offer training courses and seminars on everything to do with our drives and control units. ou can find out more on page 239 of this catalogue, and at APPENDIX MECHANICAL

8 Why BECKER? We offer people better quality of life, convenience and safety through innovative products Made in Germany. A good decision Careful selection of our suppliers, perfectly combined components and assemblies plus high production standards mean that our drives are built for reliability, long service life and smooth running. Together with our ideal range of control units, you get everything from a single source at Becker. So essentially the possibilities are limitless for your particular automation requirements.

CONTROL UNITS DRIVES Quality to rely on Today we operate globally, but as a family-owned

established. And we continue to manufacture our products in Germany.

benches, ensuring quality that you and your customers can rely on.

constantly to become even better for our customers and partners.

9 CONTROL UNITS DRIVES Quality to rely on Today we operate globally, but as a family-owned business, we have kept our roots in the town of inn, in essen, where the company was first established. And we continue to manufacture our products in Germany. What's more, every drive is subjected to comprehensive testing on our specially developed test benches, ensuring quality that you and your customers can rely on. imply e cient We regard it as our key drive that we are certified to, and that we strive constantly to become even better for our customers and partners. At the same time, we take our environmental responsibility very seriously, so energy e ciency is high on our list of priorities. We care for sustainable solutions of the highest quality. ELECTRICAL APPENDIX MECHANICAL

10 At home all over the world. Madrid for the Spanish market 200 employees in Germany and another 100 employees abroad help people throughout the world to make their lives safer and more convenient. We are personally available for you, as well as our partners in the specialist trade, at many locations throughout Europe. In addition, we work together with representatives and permanent partners throughout the world.

11 Paris for the French market Maastricht for the markets in the Benelux countries Sinn headquarters of Becker-Drives Izmir for the Turkish market CONTROL UNITS DRIVES We also have a production site in Slovakia for a range of different parts and components Prague for the markets in the Czech Republic and Slovakia n addition to the global subsidiary companies shown above, you will find our other partners and representatives at ELECTRICAL APPENDIX MECHANICAL

12 12 Overview Drives Universal drives with mechanical limit switching 14 P5-M04... P13-M04 14 R7-M04... R50-M04 14 L50-M04... L120-M04 14 Universal drives with crank connection 16 R12-M05... R50-M05 16 L50-M05... L120-M05 16 DC drives 18 L35-M06... XL200-M06 18 DC drives with crank connection 19 L60-M07... L120-M07 19 Escape door kit 20 HCS Roller shutter Solar Set 21 RSS Roller shutter drives with integrated radio receiver 34 P5-C01... P9-C01 34 R8-C01... R40-C01 34 Roller shutter drives with integrated B-Tronic radio receiver 36 P5-B01... P9-B01 36 R8-B01... R40-B01 36 SMI roller shutter drives with electronic limit switching 38 R8-S01... R40-S01 38 P5/20PS... P9/16PS 40 Sun protection drives with electronic limit switching 42 P5-E12... P9-E12 42 R8-E12... R50-E12 42 L50-E12... L120-E12 42 R8-E15... R40-E15 44 L50-E15... L120-E15 44 Roller shutter drive for narrow windows 22 R4-M17 22 Roller shutter drives with electronic limit switching 24 P5/16PR+... P9/16PR+ 24 P5-E01... P9-E01 26 R8-E01... R40-E01 26 R8-E02... R30-E02 28 P5-E03... P9-E03 30 R8-E03... R30-E03 30 Sun protection drives for locking systems with electronic limit switching 46 P5-E16 P9-E16 46 R8-E16 R40-E16 46 L50-E16 L120-E16 46 Sun protection drives with electronic limit switching and noise insulation 48 R30/17C SE+ K5 mute 48 R50/11C SE+ K5 mute 48 R8-E14... R40-E14 32

.. L120-C12 52 Sun protection drives for locking systems with integrated radio receiver 54 P5-C16... P9-C16 54 R8-C16... R40-C16 54 L50-C16.

13 13 ZIP/Fixed Screens sun protection drives with electronic limit switching 50 P5-E18... P9-E18 50 R8-E18... R40-E18 50 Blind drives 62 D259 D Nomenclature 63 Universal sun protection drives with integrated radio receiver 52 P5-C12... P9-C12 52 R8-C12... R50-C12 52 L50-C12... L120-C12 52 Sun protection drives for locking systems with integrated radio receiver 54 P5-C16... P9-C16 54 R8-C16... R40-C16 54 L50-C16... L120-C16 54 ZIP/Fixed Screens sun protection drives with integrated radio receiver 56 P5-C18... P9-C18 56 R8-C18... R40-C18 56 SMI sun protection drive with electronic limit switching 58 R8-S12... R50-S12 58 L50-S12... L120-S12 58 Beck-O-Mat garage door drives 64 BOM 850C-II 64 Technical information Roller shutter drives load table 65 Roller shutter drives function matrix 66 Sun protection drives load table 68 Sun protection drives function matrix 68 Plug-in connecting cable C-plug 72 DRIVES CONTROL UNITS ELECTRICAL ZIP SMI sun protection drive with electronic limit switching 60 R8-S18... R40-S18 60 Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products. APPENDIX MECHANICAL

14 14 Universal drives with mechanical limit switching P5-M04... P13-M04 R7-M04... R50-M04 L50-M04... L120-M04 Suitable for use for: Roller shutters Open and semi-open articulated-arm awnings Cassette awnings Drop-arm awnings Markisolettes ZIP screens Conservatory awnings Guided and unguided screens Horizontal screens Flounces Insect protection Inside screens Projection screen Highlight: Drive cable, ring and drive adapter can be mounted/disassembled without screws Motor protected against overheating Mechanical limit switching Motor head can be overwrapped Technical data P5-20-M * P5-30-M * P9-16-M * P13-9-M * R7-17-M R8-17-M * R12-17-M * R20-17-M * R30-17-M * R40-17-M * R50-11-M * L50-17-M * L60-11-M * L60-17-M * L70-17-M * L80-11-M * L M * Item number with bracket Item number without bracket Torque (Nm) Speed (rpm) Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Limit switch range (revolutions) Nominal current (A) Power consumption (W) Connecting cable (m) * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72)

15 Suitable for left and right installation Classic limit position adjustment by means of setting tools Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 ** dia.

414 454 2 471 2 17 40 2 45 R12-17-M04 414 454 2 471 2 17 40 2 45 R20-17-M04 443 483 2 500 2 17 40 2 45 R30-17-M04 567 607 2 624 2 17 40 2 45 R40-17-M04 587 627 2 644 2 17 40 2 45 R50-11-M04 514 554

20 30 3 58 L120-11-M04 673 703 3 723 3 20 30 3 58 1 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of page selection

15 15 Suitable for left and right installation Classic limit position adjustment by means of setting tools Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 ** dia. c P5-20-M P5-30-M P9-16-M P13-9-M R7-17-M R8-17-M R12-17-M R20-17-M R30-17-M R40-17-M R50-11-M L50-17-M L60-11-M L60-17-M L70-17-M L80-11-M L M rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 3 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 CONTROL UNITS DRIVES ELECTRICAL APPENDIX MECHANICAL

16 16 Universal drives with crank connection R12-M05... R50-M05 L50-M05... L120-M05 Suitable for use for: Roller shutters Open and semi-open articulated-arm awnings Cassette awnings Drop-arm awnings Markisolettes Mechanical limit switching with crank connection Suitable for left and right installation Your advantage: Crank can be inserted from 2 sides Easy limit position setting from 2 sides Motor protected against overheating Can be used for roller shutters, sun protection systems and roller doors Technical data Item number Torque (Nm) Speed (rpm) Limit switch range (revolutions) R12-17-M R20-17-M R30-17-M R40-17-M R50-11-M L50-17-M L60-11-M L60-17-M L70-17-M L80-11-M L M Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Nominal current (A) Power consumption (W) Connecting cable (m)

17 CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 ** l 3 ** l 4 l 5 ** dia.

743 27 40 45 R40-17-M05 696 736 763 27 40 45 R50-11-M05 697 737 764 27 40 45 L50-17-M05

L70-17-M05 748 778 805 27 30 58 L80-11-M05 748 778 805 27 30 58 L120-11-M05 748 778 805

change dimensions l 2, l 3 and l 5 2 rive adapter width of page selection of a

17 17 CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 ** l 3 ** l 4 l 5 ** dia. c R12-17-M R20-17-M R30-17-M R40-17-M R50-11-M L50-17-M L60-11-M L60-17-M L70-17-M L80-11-M L M rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 88 ELECTRICAL APPENDIX MECHANICAL

18 18 DC drives L35-M06... XL200-M06 Highlight: Universal control integrated relay control for UP and DOWN allows for operation using standard switches/push buttons or control units with potential-free outputs Easy limit position setting without special tools or with flexible setting tools Mechanical limit switching Can be operated with safe extra-low voltage 12 V or 24 V Your advantage: Simple battery backup with or batteries for emergency operation in the event of power failure Can be used for swimming pool covers, roller shutters, sun protection applications and vehicle superstructures Smooth, quiet running Integrated fail-safe brake Motor head can be overwrapped Technical data Item number Torque (Nm) Speed (rpm) L35-8-M L60-8-M L120-3-M XL60-8-M06* XL120-3-M06* XL200-3-M06* Operating mode: S2 8 min Degree of protection: IP44 *Degree of protection: IP45 Connecting cable: 4 m Limit switch range (revolutions) Rated voltage (V/DC) Nominal current (A) Power consumption (W) Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c L35-8-M L60-8-M L120-3-M XL60-8-M XL120-3-M XL200-3-M l 3 l 2 l 4 l 1 l 5 1 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5

19 DC drives with crank connection 19 L60-M07... L120-M07 Highlight: Universal control integrated relay control for UP and DOWN allows for operation using standard switches/push buttons or control units with potential-free outputs Easy limit position setting without special tools or with flexible setting tools Mechanical limit switching with crank connection Can be operated with safe extra-low voltage 12 V or 24 V Your advantage: Crank and/or battery operation or permits emergency operation in the event of power failure Smooth, quiet running Pivoting bearing for crank can be inserted from either side Can be used for swimming pool covers, roller shutters, sun protection applications and vehicle superstructures CONTROL UNITS DRIVES Technical data L60-8-M L120-3-M Item number Torque (Nm) Speed (rpm) Limit switch range (revolutions) Operating mode: S2 8 min Degree of protection: IP44 Connecting cable: 4 m Rated voltage (V/DC) Nominal current (A) Nominal current (A) ELECTRICAL Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c L60-8-M L120-3-M rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 APPENDIX MECHANICAL

20 Escape door kit for fitting out doors or windows with motorised shading solutions that serve as a second escape route HCS520 The shading solution will move upwards automatically in the event of a

due to a fire Blockage detection with reversal in the DOWN direction Additional redundancy due to mandatory safety switch Choice of touch mode or continuous operation Push-button connection for

Control unit can be installed in a flush-mounted electronics box or a double cavity wall box Timer can be connected Can be integrated in the Centronic radio system using receivers On-site

electronics box, push-button for on-site operation and safety switches Item no. 4007 000 026 0 (HCS520, 10 Nm) Drive P10-11-M19 Speed 11 rpm Nominal current 1.

unit's switching capacity Control unit's power consumption 230 V/AC, 50 Hz 5 A < 0.3 W Dimensions (in mm) l 1 l 2 * l 3 * l 4 l 5 * dia.

20 20 Escape door kit for fitting out doors or windows with motorised shading solutions that serve as a second escape route HCS520 The shading solution will move upwards automatically in the event of a power failure, e. g. due to a fire Blockage detection with reversal in the DOWN direction Additional redundancy due to mandatory safety switch Choice of touch mode or continuous operation Push-button connection for on-site operation Connection for central operation, smoke detectors etc. Control unit can be installed in a flush-mounted electronics box or a double cavity wall box Timer can be connected Can be integrated in the Centronic radio system using receivers On-site push-buttons, safety switches plus fittings for the drive and control unit are included with in the kit's scope of supply Kit includes assembly materials, tube adaption, motor bearings, flush-mounted electronics box, push-button for on-site operation and safety switches Item no (HCS520, 10 Nm) Drive P10-11-M19 Speed 11 rpm Nominal current 1.9 A Operating voltage 12 V/DC Drive's cable length 3 m Dimensions in mm 405 x 60 x 6 Drive's degree of protection IP 44 Control unit's degree IP 20 of protection Control unit's rated voltage Control unit's switching capacity Control unit's power consumption 230 V/AC, 50 Hz 5 A < 0.3 W Dimensions (in mm) l 1 l 2 * l 3 * l 4 l 5 * dia. c P10-11-M l 3 l 2 l 4 l 1 l 5 Escape door control unit HC520 Item no Battery for escape door control unit HC520 Item no Note: There are no clear legal requirements regarding the use of battery-buffered control units in the second emergency route. The manufacturer cannot, therefore, grant generally valid or project-related product approvals for the aforementioned use. The final decision is taken by the respective fire safety authority. Country-specific special regulations as well as local regulations and guidelines concerning this matter must be observed and applied under all circumstances. rive adapter width of x x page selection of a different drive adapter will change dimensions l 2, l 3 and l 5

Roller shutter Solar Set 21 for the operation of roller shutters independently of mains power RSS541 Mains-independent roller shutter drive and control unit set Memory function possible using

with Becker Centronic remote control The control/battery unit mounted in the interior offers easy servicing and high operational safety More than 100 operating cycles can be achieved from one battery

21 Roller shutter Solar Set 21 for the operation of roller shutters independently of mains power RSS541 Mains-independent roller shutter drive and control unit set Memory function possible using MemoControl transmitters 2 freely selectable intermediate positions can be programmed Rotation direction changeover via external transmitter On-site operation with feedback via status LED Compatible with Becker Centronic remote control The control/battery unit mounted in the interior offers easy servicing and high operational safety More than 100 operating cycles can be achieved from one battery charge With limit switching Obstacle detection through the use of rigid shaft connectors Items included: DC drive, control unit VC360, battery, solar panel, wall bracket and wiring set, S40 drive adapter and ring combination Item no (RSS541, 6 Nm) Item no (RSS541, 10 Nm) RSS541 6 Nm RSS Nm Drive torque 6 Nm 10 Nm Drive P6-20-M19 P10-11-M19 Speed 20 rpm 11 rpm Nominal current 1.9 A 1.9 A Operating voltage 12 V/DC 12 V/DC Drive's cable length 0.3 m 0.3 m Solar panel dimensions 405 x 60 x 6 mm 405 x 60 x 6 mm Degree of protection VC360: IP20 (mounted) VC360: IP20 (mounted) Solar cell IP45 IP45 Solar cell cable length 0.3 m 0.3 m Y-cable length 2.5 m 2.5 m Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P6-20-M P10-11-M l 3 l 2 l 4 l 1 l 5 CONTROL UNITS DRIVES ELECTRICAL Optional accessories 1.5 m extension cable for drive Item no Plug-in power supply 1.5 m extension cable for solar cell Item no Item no Rated voltage V/AC/50 60 Hz Current 1 A Fitting profile for solar cell Operating voltage 12 V/DC Item no * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) 1 rive adapter width of x x page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 APPENDIX MECHANICAL

22 Roller shutter drive for narrow windows R4-M17 Highlight: Short drive for narrow roller shutter applications Motor protected against overheating Automatic limit position setting Motor head can be

22 22 Roller shutter drive for narrow windows R4-M17 Highlight: Short drive for narrow roller shutter applications Motor protected against overheating Automatic limit position setting Motor head can be overwrapped Blockage detection in the UP direction (anti-freeze mechanism) Suitable for left and right installation Assembly exclusively with fixed shaft connectors Highlight: Obstacle detection in the DOWN direction when rigid shaft connectors are used Technical data R4-17-M Rigid safety springs R4-17-M17 in a set incl. rigid safety springs Item number Torque (Nm) Speed (rpm) Limit switch range (revolutions) Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Nominal current (A) Power consumption (W) Connecting cable (m)

23 ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm)

c R4-17-M17 331 351 1 373 1/3 22 2 20 1 45 l 3 l 2 l 4

a different drive adapter will change dimensions l 2,

23 23 ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 ** l 4 l 5 dia. c R4-17-M / l 3 l 2 l 4 l 1 l 5 1 rive adapter width of olm page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 with drive adapter safety catch 3 with Mini strip APPENDIX MECHANICAL

24 24 Roller shutter drives with electronic limit switching P5/16PR+ P9/16PR+ Highlight: Obstacle detection in the DOWN direction when rigid shaft connectors are used Setting of limit positions via switches on the drive head without the need for a special adjustment set Electronic limit switching Motor head can be overwrapped Your advantage: Easy programming of the limit positions with and without fixed stops Soft upper stop Blockage detection in the UP direction (anti-freeze mechanism) Dynamic torque adjustment to changes in the roller shutter element Automatic increase of the pressing force with anti-lifting devices Technical data Item number with bracket Item number without bracket Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) P5/16PR P5/20PR P9/16PR Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m)

25 25 ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5/16PR P5/20PR P9/16PR l 3 l 2 l 4 l 1 l 5 1 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 APPENDIX MECHANICAL

26 26 Roller shutter drives with electronic limit switching P5-E01... P9-E01 R8-E01... R40-E01 Highlight: Sensitive obstacle detection in the DOWN direction with automatic reversing when flexible suspension springs or rigid shaft connectors are used Automatic increase of the pressing force with anti-lifting devices Electronic limit switching Fly screen protection function Your advantage: Automatic detection of the limit positions when flexible suspension springs or rigid shaft connectors are used Intelligent installation management allows for limit position corrections Limit positions status indicator (LSI) signals missing limit positions Blockage detection in the UP direction (anti-freeze mechanism) Easy programming of the limit positions with and without fixed stops Upper anti-freeze mechanism with automatic shading solution length adjustment that can be additionally activated Setting of limit positions via switches on the drive head without the need for a special adjustment set Technical data Item number with bracket Item number without bracket Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) P5-16-E * P9-16-E * R8-17-E * R12-17-E * R20-17-E * R30-17-E * R40-17-E * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m) * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) Note: Drive adapters and rings for sensitive obstacle detection can be found on page 191 and onwards.

27 Setting of limit positions via conventional operating element, e. g.

upper stop Dynamic torque adjustment to changes in the roller shutter element ELECTRICAL CONTROL UNITS

c P5-16-E01 404 444 1 457 1 13 40 1 35 P9-16-E01 453 493 1 506 1 13 40 1 35 R8-17-E01 471 511 2 528 2 17

581 2 17 40 2 45 R40-17-E01 539 579 2 596 2 17 40 2 45 l 3 l 2 l 4 l 1 l 5 1 rive adapter width of page

27 27 Setting of limit positions via conventional operating element, e. g. rotary switch Motor head can be overwrapped Supports parallel connection n without isolating relay Soft upper stop Dynamic torque adjustment to changes in the roller shutter element ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5-16-E P9-16-E R8-17-E R12-17-E R20-17-E R30-17-E R40-17-E l 3 l 2 l 4 l 1 l 5 1 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 APPENDIX MECHANICAL

28 28 Roller shutter drives with electronic limit switching R8-E02... R30-E02 Electronic limit switching Setting of limit positions via conventional operating element, e. g. rotary switch Your advantage: Automatic detection of the limit positions when flexible suspension springs or rigid shaft connectors are used Sensitive obstacle detection in the DOWN direction when springs or rigid shaft connectors are used Motor head can be overwrapped Blockage detection in the UP direction (anti-freeze mechanism) Supports parallel connection without isolating relay Automatic increase of the pressing force with anti-lifting devices Soft upper stop Intelligent installation management allows for limit position corrections Dynamic torque adjustment to changes in the roller shutter element Limit positions status indicator (LSI) signals missing limit positions Automatic shading solution length adjustment Technical data Item number with bracket Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) R8-17-E R12-17-E R20-17-E R30-17-E Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m)

29 ELECTRICAL CONTROL UNITS DRIVES Dimensions

29 29 ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c R8-17-E R12-17-E R20-17-E R30-17-E l 3 l 2 l 4 l 1 l 5 1 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 APPENDIX MECHANICAL

30 30 Roller shutter drives with electronic limit switching P5-E03... P9-E03 R8-E03... R30-E03 Highlight: Sensitive obstacle detection in the DOWN direction with automatic reversing when flexible suspension springs or rigid shaft connectors are used Upper anti-freeze mechanism with automatic shading solution length adjustment that can be additionally activated Electronic limit switching Automatic increase of the pressing force with anti-lifting devices Your advantage: Automatic detection of the limit positions when flexible suspension springs or rigid shaft connectors are used Intelligent installation management allows for limit position corrections Limit positions status indicator (LSI) signals missing limit positions Blockage detection in the UP direction (anti-freeze mechanism) Easy programming of the limit positions with and without fixed stops Technical data Item number with bracket Item number without bracket 5 m cable Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) P5-16-E P9-16-E R8-17-E R12-17-E R20-17-E R30-17-E Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m)

31 Setting of limit positions via conventional nal operating element, e. g.

adjustment to changes in the roller shutter element CONTROL UNITS DRIVES ELECTRICAL Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia.

538 2 16 40 2 45 R20-17-E03 511 551 2 567 2 16 40 2 45 R30-17-E03 536 576 2 592 2 16 40 2 45 l 3 l 2 l 4 l 1 l 5 1 rive adapter width

31 31 Setting of limit positions via conventional nal operating element, e. g. rotary switch Motor head can be overwrapped Supports parallel connection n without isolating relay Soft upper stop Dynamic torque adjustment to changes in the roller shutter element CONTROL UNITS DRIVES ELECTRICAL Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5-16-E P9-16-E R8-17-E R12-17-E R20-17-E R30-17-E l 3 l 2 l 4 l 1 l 5 1 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 APPENDIX MECHANICAL

32 32 Roller shutter drives with electronic limit switching R8-E14... R40-E14 Electronic limit switching Intelligent installation management allows for limit position corrections Blockage detection in the UP direction (anti-freeze mechanism) Limit positions status indicator (LSI) signals missing limit positions Upper anti-freeze mechanism with automatic shading solution length adjustment that can be additionally activated Easy programming of the limit positions with and without fixed stops Automatic increase of the pressing force with anti-lifting devices Setting of limit positions via conventional operating element, e. g. rotary switch Technical data Item number with bracket Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) R8-17-E * R12-17-E * R20-17-E * R30-17-E * R40-17-E * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m)

33 Motor head can be overwrapped Supports parallel connection without isolating relay Soft upper stop Dynamic torque

R30-17-E14 527 567 1 583 1 16 40 1 45 R40-17-E14 540 580 1 596 1 16 40 1 45 * C-plug connecting cables are available

33 33 Motor head can be overwrapped Supports parallel connection without isolating relay Soft upper stop Dynamic torque adjustment to changes in the roller shutter element ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c R8-17-E R12-17-E R20-17-E R30-17-E R40-17-E * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) 1 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 APPENDIX MECHANICAL

34 34 Roller shutter drives with integrated radio receiver P5-C01... P9-C01 R8-C01... R40-C01 Highlight: Sensitive obstacle detection in DOWN direction with automatic reversing when flexible suspension springs or rigid shaft connectors are used Automatic increase of the pressing force with anti-lifting devices Integrated radio receiver compatible with the Centronic control unit range Fly screen protection function Motor head can be overwrapped Your advantage: Automatic detection of the limit positions when flexible suspension springs or rigid shaft connectors are used Intelligent installation management allows for limit position corrections Blockage detection in the UP direction (anti-freeze mechanism) Limit positions status indicator (LSI) signals missing limit positions Upper anti-freeze mechanism with automatic shading solution length adjustment that can be additionally activated Easy programming of the limit positions with and without fixed stops Technical data Item number with bracket Item number without bracket Torque (Nm) Speed (rpm) P5-16-C * P9-16-C * R8-17-C * R12-17-C * R20-17-C * R30-17-C * R40-17-C * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Limit switch range (revolutions) Nominal current (A) Power consumption (W) Connecting cable (m) Note: Drive adapters and rings for sensitive obstacle detection can be found on page 191 and onwards.

35 2 freely selectable intermediate positions can be programmed Single, group and central control units possible with up to 16 transmitters Soft upper stop Dynamic torque adjustment to changes in the

c P5-16-C01 421 461 1 474 1 13 40 1 35 P9-16-C01 451 491 1 504 1 13 40 1 35 R8-17-C01 471 511 2 528 2 17 40 2 45 R12-17-C01 471 511 2 528 2 17 40 2 45 R20-17-C01 500 540 2 557 2 17 40 2 45 R30-17-C01

35 35 2 freely selectable intermediate positions can be programmed Single, group and central control units possible with up to 16 transmitters Soft upper stop Dynamic torque adjustment to changes in the roller shutter element CONTROL UNITS DRIVES ELECTRICAL Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5-16-C P9-16-C R8-17-C R12-17-C R20-17-C R30-17-C R40-17-C * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) 1 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 APPENDIX MECHANICAL

36 36 Roller shutter drives with integrated B-Tronic radio receiver P5-B01... P9-B01 R8-B01... R40-B01 Highlight: Feedback of position and status, along with repeating function which can be activated Sensitive obstacle detection. The drive stops and reverses automatically if it meets an obstacle Integrated bidirectional radio receiver and memory function / The drive feeds back its position to the operator unit along with the status information Blockage detection in the UP direction (anti-freeze mechanism) Compatible with the KNX-RF standard, allowing for easy integration into home automation installations Upper anti-freeze mechanism with automatic shading solution length adjustment that can be additionally activated Can be programmed to recognise up to 16 transmitters Automatic increase of the pressing force with anti-lifting devices Switching times can be programmed with hand-held transmitters and CentralControl Intelligent installation management allows for limit position corrections Easy programming and approach of any 2 intermediate positions from any position with transmitter or automatic function Limit positions can be set with pinpoint accuracy depending on the requirements, the limit positions can also be set with pinpoint accuracy Technical data Item number with bracket Item number without bracket Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) P5-16-B * P9-16-B * R8-17-B * R12-17-B * R20-17-B * R30-17-B * R40-17-B * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m) Note: Drive adapters and rings for sensitive obstacle detection can be found on page 191 and onwards.

37 Automatic limit position setting when fixed stops are used, the drive automatically detects the limit positions, regardless of whether rigid shaft connectors or flexible

DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia.

557 2 17 40 2 45 R30-17-B01 524 564 2 581 2 17 40 2 45 R40-17-B01 539 579 2 596 2 17 40 2 45 * C-plug connecting cables are available in various versions and lengths, and are

37 37 Automatic limit position setting when fixed stops are used, the drive automatically detects the limit positions, regardless of whether rigid shaft connectors or flexible suspension springs are being used Soft upper stop Dynamic torque adjustment to changes in the roller shutter element Fly screen protection function ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5-16-B P9-16-B R8-17-B R12-17-B R20-17-B R30-17-B R40-17-B * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) 1 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 APPENDIX MECHANICAL

38 38 SMI roller shutter drives with electronic limit switching R8-S01... R40-S01 Electronic limit switching Automatic increase of the pressing force with anti-lifting devices Sensitive obstacle detection: If contact is made with an obstacle, the drive will automatically stop and reverse even when flexible shaft connectors (springs) are being used. Intelligent installation management with limit positions status indicator (LSI) Blockage detection in the UP direction (anti-freeze mechanism) Soft upper stop Upper anti-freeze mechanism with automatic shading solution length adjustment that can be additionally activated Dynamic torque adjustment to changes in the roller shutter element Fly screen protection function Technical data Item number Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) R8-17-S * R12-17-S * R20-17-S * R30-17-S * R40-17-S * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m)

39 Automatic limit position setting when fixed stops are used, the drive automatically detects the limit positions, regardless of whether rigid shaft connectors or flexible suspension springs are

c R8-17-S01 471 511 2 528 2 17 40 2 45 R12-17-S01 471 511 2 528 2 17 40 2 45 R20-17-S01 500 540 2 557 2 17 40 2 45 R30-17-S01 524 564 2 581 2 17 40 2 45 R40-17-S01 539 579 2 596 2 17 40 2 45 * C-plug

39 39 Automatic limit position setting when fixed stops are used, the drive automatically detects the limit positions, regardless of whether rigid shaft connectors or flexible suspension springs are being used Thermal protection incl. electronic detection of activation Suitable for left and right installation ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c R8-17-S R12-17-S R20-17-S R30-17-S R40-17-S * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) 1 Drive adapter width of O-S60 ( ) page 191; selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 APPENDIX MECHANICAL

40 40 Sun protection drives with electronic limit switching P5/20PS... P9/16PS Highlight: Universal use in many shade systems, with or without stop Automatic shading solution length adjustment Electronic limit switching Supports parallel connection without isolating relay Your advantage: Setting of limit positions via switch on the drive head without the need for a special adjustment set Soft upper stop optimum adaptation of closing forces for fabric protection = E12-V9 Blockage detection in both directions with automatic reversal and multiple testing Motor head can be overwrapped Technical data Item number Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) P5/20PS P5/30PS P9/16PS Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m)

41 41 ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5/20PS P5/30PS P9/16PS l 3 l 2 l 4 l 1 l 5 1 rive adapter width of x x page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 APPENDIX MECHANICAL

42 42 Sun protection drives with electronic limit switching P5-E12... P9-E12 R8-E12... R50-E12 L50-E12... L120-E12 Highlight: Universal use in many shade systems, with or without stop Blockage detection in both directions with automatic reversal and multiple testing Electronic limit switching Fabric untensioning can be activated/ deactivated Your advantage: Setting of limit positions via switch on the drive head without the need for a special adjustment set Automatic shading solution length adjustment Technical data P5-16-E12** * P5-20-E12** * P5-30-E12** * P9-16-E12** * R8-17-E12(-V9) ** * R12-17-E12(-V9) ** * R20-17-E12(-V9) ** * R30-17-E12(-V9) ** * R40-17-E12(-V9) ** * R50-11-E12(-V9) ** * L50-17-E12(-V9) ** * L60-11-E12(-V9) ** * L60-17-E12(-V9) ** * L70-17-E12(-V9) ** * L80-11-E12(-V9) ** * L E12(-V9) ** * Item number Item number V9 Torque (Nm) Speed (rpm) Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Limit switch range (revolutions) Nominal current (A) Power consumption (W) Connecting cable (m) *C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) **Soft upper stop

43 Higher closing force for cassette awnings Supports parallel connection without isolating relay

rotary switch Highlight: Auto-install function Soft upper stop optimum adaptation of closing forces

outermost limit position CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia.

13 40 1 35 P9-16-E12 451 491 1 504 1 13 40 1 35 R8-17-E12 471 511 2 528 2 17 40 2 45 R12-17-E12 471

R40-17-E12 539 579 2 596 2 17 40 2 45 R50-11-E12 553 593 2 610 2 17 40 2 45 L50-17-E12 535 565 3 585 3

595 3 614 3 20 30 3 58 L80-11-E12 565 595 3 615 3 20 30 3 58 L120-11-E12 565 595 3 615 3 20 30 3 58 1

and l 5 2 rive adapter width of W page selection of a different drive adapter will change dimensions l

43 43 Higher closing force for cassette awnings Supports parallel connection without isolating relay Setting of limit positions via conventional operating element, e. g. rotary switch Highlight: Auto-install function Soft upper stop optimum adaptation of closing forces for fabric protection = E12-V9 Motor head can be overwrapped Reversal can be activated in the outermost limit position CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5-16-E P5-20-E P5-30-E P9-16-E R8-17-E R12-17-E R20-17-E R30-17-E R40-17-E R50-11-E L50-17-E L60-11-E L60-17-E L70-17-E L80-11-E L E rive adapter width of x x page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of W page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 3 rive adapter width of W page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 ELECTRICAL APPENDIX MECHANICAL

44 44 Sun protection drives with electronic limit switching R8-E15... R40-E15 L50-E15... L120-E15 Highlight: Universal use in many shade systems, with or without stop Higher closing force for cassette awnings can be activated during installation Electronic limit switching Limit positions status indicator (LSI) signals missing limit positions Blockage detection in both directions with automatic reversal and multiple testing Setting of limit positions via conventional operating element, e. g. rotary switch Automatic shading solution length adjustment Supports parallel connection without isolating relay Technical data Item number Torque (Nm) Speed (rpm) Limit switch range (revolutions) R8-17-E * R12-17-E * R20-17-E * R30-17-E * R40-17-E * R50-11-E * L50-17-E * L60-11-E * L60-17-E * L70-17-E * L80-11-E * L E * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Nominal current (A) Power consumption (W) Connecting cable (m)

45 Soft upper stop optimum adaptation of closing forces for cloth protection Motor head can be overwrapped CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia.

R50-11-E15 540 580 1 596 1 16 40 1 45 L50-17-E15 535 565 2 585 2 20 30 3 58 L60-11-E15 515 545 2 565 2 20 30 2 58 L60-17-E15 565 595 2 615 2 20 30 2 58 L70-17-E15 565 595 2 615 2 20 30 2 58

45 45 Soft upper stop optimum adaptation of closing forces for cloth protection Motor head can be overwrapped CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c R8-17-E R12-17-E R20-17-E R30-17-E R40-17-E R50-11-E L50-17-E L60-11-E L60-17-E L70-17-E L80-11-E L E * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) 1 rive adapter width of W page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of W page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 ELECTRICAL APPENDIX MECHANICAL

46 46 Sun protection drives for locking systems with electronic limit switching P5-E16 P9-E16 R8-E16 R40-E16 L50-E16 L120-E16 Electronic limit switching Automatic shading solution length adjustment Can be used for wind-resistant screens (locking system) Intelligent installation management Blockage detection in both directions with automatic reversal and multiple testing Simple setting of limit positions with ad ustment set outer limit position by pressing a button, upper limit position automatically Technical data Item number Torque (Nm) Speed (rpm) Limit switch range (revolutions) P5-20-E * P9-16-E * R8-17-E * R12-17-E * R20-17-E * R30-17-E * R40-17-E * L50-17-E * L70-17-E * L80-11-E * L E * L120-E11-E * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Nominal current (A) Power consumption (W) Connecting cable (m)

isolating relay Motor head can be overwrapped CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia.

47 47 Setting of limit positions via conventional operating element, e. g. rotary switch Soft upper stop optimum adaptation of closing forces for cloth protection Limit positions status indicator (LSI) signals missing limit positions Supports parallel connection without isolating relay Motor head can be overwrapped CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5-20-E P9-16-E R8-17-E R12-17-E R20-17-E R30-17-E R40-17-E L50-17-E L70-17-E L80-11-E L E L E rive adapter width of x x page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of W page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 ELECTRICAL APPENDIX MECHANICAL

48 48 Sun protection drives with electronic limit switching and noise insulation R30/17C SE+ K5 mute R50/11C SE+ K5 mute Highlight: mute extra-quiet running Setting of limit positions via conventional operating element, e. g. rotary switch Electronic limit switching Automatic detection of limit positions for awnings Special mute adapter required 2 Auto-install function Blockage detection in the UP direction (anti-freeze mechanism) Supports parallel connection without isolating relay Automatic shading solution length adjustment Motor head can be overwrapped Higher closing force for cassette awnings Technical data Item number Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) R30/17C SE+ K5 mute * R40/17C SE+ K5 mute * R50/11C SE+ K5 mute * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m)

R50/11C SE+ K5 mute 669 698 1 715 1 17 29 1 45 1 rive adapter width of W mute page selection of a

49 49 ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c R30/17C SE+ K5 mute R40/17C SE+ K5 mute R50/11C SE+ K5 mute rive adapter width of W mute page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 mute adapters from page 187 l 3 l 2 l 4 l 1 l 5 APPENDIX MECHANICAL

50 50 ZIP/Fixed Screens sun protection drives with electronic limit switching P5-E18... P9-E18 R8-E18... R40-E18 Suitable for use for: ZIP screens Guided and unguided screens Highlight: Sensitive obstacle detection in the DOWN direction with automatic reversal and multiple testing Blockage detection in the UP direction (anti-freeze mechanism) with automatic reversal and multiple testing Electronic limit switching Limit positions status indicator (LSI) signals missing limit positions Your advantage: Automatic detection of limit positions Setting of limit positions via switch on the drive head without the need for a special adjustment set Setting of limit positions via conventional operating element, e. g. rotary switch Technical data Item number Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) P5-16-E * P5-20-E * P5-30-E * P9-16-E * R8-17-E * R12-17-E * R20-17-E * R30-17-E * R40-17-E * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m)

51 Fabric untensioning can be activated/ deactivated Automatic shading solution length adjustment Supports parallel connection without

c P5-16-E18 404 13 40 1 35 P5-20-E18 451 491 1 504 1 13 40 1 35 P5-30-E18 451 491 1 504 1 13 40 1 35 P9-16-E18 451 491 1 504 1 13 40 1 35

17 40 2 45 R40-17-E18 539 579 2 596 2 17 40 2 45 1 rive adapter width of page selection of a different drive adapter will change dimensions

51 51 Fabric untensioning can be activated/ deactivated Automatic shading solution length adjustment Supports parallel connection without isolating relay Motor head can be overwrappeded CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5-16-E P5-20-E P5-30-E P9-16-E R8-17-E R12-17-E R20-17-E R30-17-E R40-17-E rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of W page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 ELECTRICAL APPENDIX MECHANICAL

52 52 Universal sun protection drives with integrated radio receiver P5-C12... P9-C12 R8-C12... R50-C12 L50-C12... L120-C12 Highlight: Universal use in many shade systems, with or without stop Blockage detection in both directions with automatic reversal and multiple testing Highlight: Auto-install function 2 freely selectable intermediate positions can be programmed Electronic limit switching with integrated radio receiver compatible with the Centronic range of control units Fabric untensioning can be activated/ deactivated Technical data Item number Parts number (Soft upper stop) Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) P5-20-C12** * P5-30-C12** * P9-16-C12** * R8-17-C12(-V9) ** * R12-17-C12(-V9) ** * R20-17-C12(-V9) ** * R30-17-C12(-V9) ** * R40-17-C12(-V9) ** * R50-17-C12(-V9) ** * L50-17-C12(-V9) ** * L60-11-C12(-V9) ** * L60-17-C12(-V9) ** * L70-17-C12(-V9) ** * L80-11-C12(-V9) ** * L C12(-V9) ** * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m) *C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) **Soft upper stop

53 On-site operation via conventional single button Intermediate positions can be approached from any position Automatic shading solution length adjustment Higher closing force for

can be overwrapped CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia.

R20-17-C12 500 540 2 557 2 17 40 2 45 R30-17-C12 524 564 2 581 2 17 40 2 45 R40-17-C12 539 579 2 596 2 17 40 2 45 R50-17-C12 553 570 2 587 2 17 40 2 45 L50-17-C12 535 565 3 585 3 20 30 3

30 3 58 l 3 l 2 l 4 l 1 l 5 1 Drive adapter width of 40 x 1/42 x 2 (4930 300 086 0) page 187; selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 Drive

53 53 On-site operation via conventional single button Intermediate positions can be approached from any position Automatic shading solution length adjustment Higher closing force for cassette awnings Single, group and central control units possible with up to 16 transmitters Soft upper stop optimum adaptation of closing forces = C12-V9 for cloth protection Motor head can be overwrapped CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5-20-C P5-30-C P9-16-C R8-17-C R12-17-C R20-17-C R30-17-C R40-17-C R50-17-C L50-17-C L60-11-C L60-17-C L70-17-C L80-11-C L C l 3 l 2 l 4 l 1 l 5 1 Drive adapter width of 40 x 1/42 x 2 ( ) page 187; selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 Drive adapter width of DW78 R+F ( ) page 185; selection of a different drive adapter will change dimensions l 2, l 3 and l 5 3 Drive adapter width of O-DW78 R+F ( ) page 193; selection of a different drive adapter will change dimensions l 2, l 3 and l 5 ELECTRICAL APPENDIX MECHANICAL

54 54 Sun protection drives for locking systems with integrated radio receiver P5-C16... P9-C16 Suitable for use for: Locking systems R8-C16... R40-C16 L50-C16... L120-C16 Electronic limit switching with integrated radio receiver compatible with the Centronic range of control units Easy limit position setting with Centronic operating element Can be used for wind-resistant screens (locking system) On-site operation via conventional single button Blockage detection in both directions with automatic reversal and multiple testing Automatic shading solution length adjustment Technical data Item number Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) P5-20-C * P9-16-C * R8-17-C * R12-17-C * R20-17-C * R30-17-C * R40-17-C * L50-17-C * L70-17-C * L80-11-C * L C * L C * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m)

55 Intelligent installation management Limit positions status indicator (LSI) signals missing limit positions Soft upper stop

511 1 528 1 17 40 1 45 R20-17-C16 500 540 1 557 1 17 40 1 45 R30-17-C16 524 564 1 591 1 17 40 1 45 R40-17-C16 539 579 1 596 1 17

L100-11-C16 565 595 1 615 1 20 30 1 58 L120-11-C16 565 595 1 615 1 20 30 1 58 * C-plug connecting cables are available in

55 55 Intelligent installation management Limit positions status indicator (LSI) signals missing limit positions Soft upper stop optimum adaptation of closing forces for cloth protection Motor head can be overwrapped CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5-20-C P9-16-C R8-17-C R12-17-C R20-17-C R30-17-C R40-17-C L50-17-C L70-17-C L80-11-C L C L C * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) 1 rive adapter width of W page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 ELECTRICAL APPENDIX MECHANICAL

56 56 ZIP/Fixed Screens sun protection drives with integrated radio receiver P5-C18... P9-C18 R8-C18... R40-C18 Suitable for use for: ZIP screens Guided and unguided screens Highlight: Sensitive obstacle detection in the DOWN direction with automatic reversal and multiple testing Intelligent installation management allows for limit position corrections Electronic limit switching with integrated radio receiver compatible with the Centronic range of control units Limit positions status indicator (LSI) signals missing limit positions 2 freely selectable intermediate positions can be programmed Your advantage: Automatic detection of limit positions Fabric untensioning can be activated/ deactivated Blockage detection in the UP direction (anti-freeze mechanism) with automatic reversal and multiple testing Automatic shading solution length adjustment Technical data Item number Torque (Nm) Speed (rpm) P5-20-C * P5-30-C * P9-16-C * R8-17-C * R12-17-C * R20-17-C * R30-17-C * R40-17-C * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Limit switch range (revolutions) Nominal current (A) Power consumption (W) Connecting cable (m) Note: Drive adapters and rings for sensitive obstacle detection can be found on page 191 and onwards.

57 Motor head can be overwrapped Intermediate positions can be approached from any position Single, group and central control units possible with up to 16 transmitters On-site operation via

c P5-20-C18 453 493 1 506 1 13 40 1 35 P5-30-C18 453 493 1 506 1 13 40 1 35 P9-16-C18 453 493 1 506 1 13 40 1 35 R8-17-C18 471 511 2 528 2 17 40 2 45 R12-17-C18 471 511 2 528 2 17 40 2 45 R20-17-C18

57 57 Motor head can be overwrapped Intermediate positions can be approached from any position Single, group and central control units possible with up to 16 transmitters On-site operation via conventional single button ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c P5-20-C P5-30-C P9-16-C R8-17-C R12-17-C R20-17-C R30-17-C R40-17-C * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) 1 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of W page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 APPENDIX MECHANICAL

58 58 SMI sun protection drive with electronic limit switching R8-S12... R50-S12 L50-S12... L120-S12 Suitable for use for: Open and semi-open articulated-arm awnings Cassette awnings Drop-arm awnings Markisolettes Conservatory awnings Guided and unguided screens Horizontal screens Flounces Insect protection Inside screens Projection screen Electronic limit switching Upper stop behaviour can be configured Blockage detection in both directions with automatic reversal and multiple testing Automatic shading solution length adjustment Fabric tension function can be switched on in the lower limit position Lower limit position setting: Point (automatic detection or freely programmable) Upper limit position setting: Point or stop Fabric untensioning can be switched on/off in the upper limit position Intelligent installation management with limit positions status indicator (LSI) Technical data Item number Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) Power consumption (W) R8-17-S * R12-17-S * R20-17-S * R30-17-S * R40-17-S * R50-11-S * L50-17-S * L60-11-S * L60-17-S * L70-17-S * L80-11-S * L S * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Connecting cable (m)

CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia.

17 17 1 45 R30-17-S12 542 559 1 576 1 17 17 1 45 R40-17-S12 553 570 1 587 1 17 17 1 45 R50-11-S12 553

L60-17-S12 565 595 2 615 2 20 30 2 58 L70-17-S12 565 595 2 615 2 20 30 2 58 L80-11-S12 535 565 2 585 2

versions and lengths, and are to be ordered separately (cf.

59 59 Thermal protection incl. electronic detection of activation Auto-install function Suitable for left and right installation CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c R8-17-S R12-17-S R20-17-S R30-17-S R40-17-S R50-11-S L50-14-S L60-11-S L60-17-S L70-17-S L80-11-S L S * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) 1 rive adapter width of W page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 2 rive adapter width of W page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 ELECTRICAL APPENDIX MECHANICAL

60 60 ZIP SMI sun protection drive with electronic limit switching R8-S18... R40-S18 Suitable for use for: ZIP screens Electronic limit switching Automatic shading solution length adjustment Highlight: Sensitive obstacle detection in the DOWN direction with automatic reversal and multiple testing Lower limit position setting: Point (automatic detection or freely programmable) Upper limit position setting: Point or stop Blockage detection in both directions with automatic reversal and multiple testing Intelligent installation management with limit positions status indicator (LSI) Fabric untensioning can be switched on/off in the upper limit position Soft upper stop Technical data Item number Torque (Nm) Speed (rpm) R8-17-S * R12-17-S * R20-17-S * R30-17-S * R40-17-S * Rated voltage: 230 V/AC / 50 Hz Operating mode: S2 4 min Degree of protection: IP44 Limit switch range (revolutions) Nominal current (A) Power consumption (W) Connecting cable (m)

end strip Suitable for left and right installation ELECTRICAL CONTROL UNITS DRIVES

c R8-17-S18 471 511 1 528 1 17 40 1 45 R12-17-S18 471 511 1 528 1 17 40 1 45 R20-17-S18

596 1 17 40 1 45 * C-plug connecting cables are available in various versions and

61 61 Thermal protection incl. electronic detection of activation Auto-install function for zip applications with heavy end strip Suitable for left and right installation ELECTRICAL CONTROL UNITS DRIVES Dimensions (in mm) l 1 l 2 l 3 l 4 l 5 dia. c R8-17-S R12-17-S R20-17-S R30-17-S R40-17-S * C-plug connecting cables are available in various versions and lengths, and are to be ordered separately (cf. table on page 72) 1 rive adapter width of page selection of a different drive adapter will change dimensions l 2, l 3 and l 5 l 3 l 2 l 4 l 1 l 5 APPENDIX MECHANICAL

62 Blind drives D259 D839 Highlight: Easy fitting in the head rail through adapted form with internal, hidden fastening brackets Precise switch-off in the upper limit position via the mushroom-head

5 m motor cable and moulded-on connector Adjustable upper and lower limit positions Technical data Item number Left side fitting (left-handed rotation) Item number Right side fitting (right-handed

62 62 Blind drives D259 D839 Highlight: Easy fitting in the head rail through adapted form with internal, hidden fastening brackets Precise switch-off in the upper limit position via the mushroom-head push button Standardised drives with modular accessories With 0.5 m motor cable and moulded-on connector Adjustable upper and lower limit positions Technical data Item number Left side fitting (left-handed rotation) Item number Right side fitting (right-handed rotation) Torque (Nm) Speed (rpm) Limit switch range (revolutions) Nominal current (A) D x D x D370 SMI x 5 one-sided 6 Nm D D x Rated voltage: 230 V/AC/50 Hz Operating mode: D259, D359, D839: KB 4 min, D539: KB 6 min Degree of protection: IP54 Power consumption (W) Dimensions (in mm) b l 1 l 2 l 3 c d D D D370 SMI D D Central motor D259/D359 b l 1 l 3 l 2 c d End motor D370 SMI End motor D539 Central motor D839 b l 1 d b l 1 l 2 d l 1 l 3 l 2 l 2 l 3 c c c Note: Accessories for blind drives can be found on page 224. Drilling templates can be found on pages 228, 230 and 232.

63 Nomenclature 63 Blind drives, type designations Series Series D2 59 Limit switch design D5: End motor, 10 Nm D2: Central motor, 2 x 3 Nm D3: Central motor, 2 x 4.5 Nm or 2 x 5 Nm D8: Central motor, 2 x 9.5 Nm or 2 x 8 Nm Limit switch design 39/59: adjustable upper and lower limit position, mushroom-head push button for upper limit position 38/48: upper limit position via mushroom-head push button, lower limit position via double limit switch for shading solutions with working position 70: Electronic limit position setting Successor products Development of the blind drive range D204 D234 D239 D249 D238B D204 AE D504 D534 D538B D104 AE D259 D539 D304 D334 D349 D338B D304 AE D704 (D704s) D734 (D734s) D739 D738B (D738 sb) D704 AE (D704 sae) D359 D839 APPENDIX MECHANICAL ELECTRICAL CONTROL UNITS DRIVES

64 Beck-O-Mat garage door drives for canopy, tilt and sectional doors BOM 850C-II Smooth-running toothed belt drive Automatic force monitoring tandby consumption of.

start/soft stop using ramps High operating speed BOM 850C-II garage door drive Toothed belt rail (3,028 mm, 2-part) for tilt doors up to max., mm and sectional doors Item no.

64 64 Beck-O-Mat garage door drives for canopy, tilt and sectional doors BOM 850C-II Smooth-running toothed belt drive Automatic force monitoring tandby consumption of. W Centronic-compatible EC142-II hand-held transmitter and running rail included Menu-driven programming Easy assembly and start-up through prefabricated assembly elements High-class door select Soft start/soft stop using ramps High operating speed BOM 850C-II garage door drive Toothed belt rail (3,028 mm, 2-part) for tilt doors up to max., mm and sectional doors Item no Colour Traction Fn Traction Fmax Rated voltage Degree of protection Permissible ambient temperature White 240 N 800 N 230 V/AC/50 Hz IP20, for dry rooms only 20 to +60 C With springs at the front up to max., mm With springs at the rear up to max., mm Item no Toothed belt rail (4,028 mm, 2-part) for tilt doors up to max., mm and sectional doors With springs at the front up to max., mm With springs at the rear up to max., mm Item no

65 Roller shutter drives load table 65 for types M04, E03, PR(+), E01, C01, B01, M05, E02, E14 The tensile load figures are guidelines for single-piece roller shutter curtains. (Tensile load figures in kg) The friction typical for roller shutters has been taken into account! Example: Shaft dia. 60 mm Roller shutter height 2.20 m Profile thickness 14 mm 23 kg curtain weight Result type: R12 Shaft diameter (mm) Roller shutter height (m) Profile thickness (mm) Type Nm/rpm kg kg kg kg kg kg kg kg kg kg P5 5/ P5 5/ P5 5/ P9 9/ P13 13/ R4 4/ R8 8/ R12 12/ R20 20/ R30 30/ R40 40/ R50 50/ Shaft diameter (mm) Roller shutter height (m) Profile thickness (mm) Type Nm/rpm kg kg kg kg kg kg kg kg kg kg R4 4/ R8 8/ R12 12/ R20 20/ R30 30/ R40 40/ R50 50/ L60 60/ L70 70/ L80 80/ L / CONTROL UNITS DRIVES ELECTRICAL APPENDIX MECHANICAL

66 66 Roller shutter drives function matrix Integrated radio receiver Electronic limit switching C01 B01 PR+ E01 E02 Type in mm P (Ø 35) R (Ø 45) P (Ø 35) R (Ø 45) P (Ø 35) P (Ø 35) R (Ø 45) R (Ø 45) Torque in Nm Speed in 1/min Remote control Centronic Centronic B-Tronic B-Tronic Plug-in connecting cable VDE/NF conformity mark DC Crank Suspension springs Anti-lifting devices Setting of limit positions On the drive head With adjusting cable With radio transmitter Upper stop to lower stop Upper stop to lower point Upper point to lower stop Upper point to lower point Additional functions Intelligent installation management LSI Limit positions status indicator Automatic shading solution length adjustment Obstacle detection in downward travel with flexible suspension springs Obstacle detection in downward travel with fixed shaft connectors Soft obstacle detection with reversing Upper anti-freeze mechanism Lower anti-freeze mechanism, blockage detection in upward travel Lower anti-freeze mechanism, blockage detection in upward travel with reversing Fly screen protection function Soft upper stop Dynamic torque adjustment Connectible in parallel without isolating relay

67 67 Mechanical limit switching E03 E14 S01 M04 M05 M06 M07 M17 P (Ø 35) R (Ø 45) R (Ø 45) P (Ø 35) R (Ø 45) P (Ø 35) R (Ø 45) L (Ø 58) R (Ø 45) L (Ø 58) L (Ø 58) L (Ø 58) R (Ø 45) CONTROL UNITS DRIVES ELECTRICAL APPENDIX MECHANICAL

68 68 Sun protection drives load table for types,,,, and with mm, with mm Number of arms 2 m 2.5 m 3 m 3.5 m Width (m) Ø R Ø L Ø R Ø L Ø R Ø L Ø R Ø L Sun protection drives function matrix Mechanical limit switching M04 M05 PS Type (tube diameter) in mm P (Ø 35) R (Ø 45) L (Ø 58) R (Ø 45) L (Ø 58) P (Ø 35) Torque in Nm Speed in 1/min Plug-in connecting cable VDE/NF conformity mark Setting of limit positions On the drive head With adjusting cable With radio transmitter Extended point to retracted point Extended point to retracted stop Retracted stop to freely programmable locking Additional functions AutoInstall Intelligent installation management Automatic fabric stretching (conservatory awning) Fabric untensioning Automatic shading solution length adjustment Blockage detection during retraction Higher closing force for cassette awnings Soft upper stop Supports parallel connection without isolating relay

69 69 4 m 4.5 m 5 m Ø R Ø L Ø R Ø L Ø R Ø L Drive torque (Nm) depends on the drop length (m) Assumption: 78 mm shaft Ø 20 drop angle Becker does not accept any responsibility for the accuracy of information. Due to the wide range of different brands/models and the corresponding variety in drive power requirements, the Nm data provided are non-binding and intended as a guideline only. Electronic limit switching E12 E15 E16 SE+ K5 mute P (Ø 35) R (Ø 45) L (Ø 58) R (Ø 45) L (Ø 58) P (Ø 35) R (Ø 45) L (Ø 58) R (Ø 45) / / CONTROL UNITS DRIVES ELECTRICAL APPENDIX MECHANICAL

70 70 Sun protection drives function matrix Electronic limit switching E18 S12 S18 Type (tube diameter) in mm P (Ø 35) R (Ø 45) P (Ø 35) R (Ø 45) L (Ø 58) P (Ø 35) Torque in Nm Speed in 1/min Plug-in connecting cable VDE/NF conformity mark Setting of limit positions On the drive head With adjusting cable With radio transmitter Extended point to retracted point Extended point to retracted stop Retracted stop to freely programmable locking Additional functions AutoInstall Intelligent installation management Automatic fabric stretching (conservatory awning) Fabric untensioning Automatic shading solution length adjustment Blockage detection during retraction Higher closing force for cassette awnings Soft upper stop Supports parallel connection without isolating relay

71 71 Integrated radio receiver S18 C12 C16 C18 R (Ø 45) P (Ø 35) R (Ø 45) L (Ø 58) P (Ø 35) R (Ø 45) L (Ø 58) P (Ø 35) R (Ø 45) APPENDIX MECHANICAL ELECTRICAL CONTROL UNITS DRIVES

72 Plug-in BECKER connecting cable High flexibility thanks to different versions of C-plug plug-in connecting cables.

Drive head can be overwrapped Degree of protection IP44 Only a conventional mains tester with a narrow blade is needed for assembling/dismantling the drive cable.

UV-resistant rubber cable Black cable allows for inconspicuous integration amongst dark or black elements.

Available versions With wire end ferrules Connecting cable (m) Colour Item no. 0.

72 72 Plug-in BECKER connecting cable High flexibility thanks to different versions of C-plug plug-in connecting cables. No screw connection is necessary, thereby simplifying mounting and disassembly. Drive head can be overwrapped Degree of protection IP44 Only a conventional mains tester with a narrow blade is needed for assembling/dismantling the drive cable. White cable allows for inconspicuous integration even in visible areas. UV-resistant rubber cable Black cable allows for inconspicuous integration amongst dark or black elements. Dismantling the cable when fitted into the roller shutter box is usually possible (depending on the installation position). Available versions With wire end ferrules Connecting cable (m) Colour Item no. 0.5 m white m white m white m black m white m black m white m black m white m black With Hirschmann plug Type STAS 3N incl. securing clip Connecting cable (m) Colour Item no. 0.3 m white m white m black m white m black m black m black m black With BECKER coupling 75,5 Connecting cable (m) Colour Item no m black

73 Assembly tool One side for mounting One side for dismantling Secure engagement and release of the C-plug connector Easy and reliable application of the C-plug tool through guidance along the

73 73 Assembly tool One side for mounting One side for dismantling Secure engagement and release of the C-plug connector Easy and reliable application of the C-plug tool through guidance along the connecting cable or drives with tube diameters and mm Item no Mounting with mains tester Mounting with C-plug tool Mounting side Click Mains tester with narrow blade Dismantling tool Dismantling tool for drive adapters Locating lug Locating latch C-plug tool CONTROL UNITS DRIVES Item no Dismantling with mains tester Dismantling with C-plug tool Dismantling side ELECTRICAL APPENDIX MECHANICAL

control units 80 Memory button 82 Timers 84

Sensors 88 Wind and sun protection sets 90

transmitters 92 Radio receivers 108 Radio

roller door control units for tubular drives

radio receiver 138 KNX-RF accessories 140

sensors 142 Adapter frame, Alpine white 147

74 74 Overview Control units Wired control units 76 Switch/button 76 Single and group control units 80 Memory button 82 Timers 84 Wind and sun protection control unit 86 Sensors 88 Wind and sun protection sets 90 Centronic radio control units 92 Radio transmitters 92 Radio receivers 108 Radio sensors 114 Radio sets 122 Beck-O-Tronic roller door control units for tubular drives 128 B-Tronic radio control units 134 KNX-RF radio receiver 138 KNX-RF accessories 140 KNX-RF radio transmitter 141 KNX-RF radio sensors 142 Adapter frame, Alpine white 147 Accessories 149 Overview of the Centronic range of control units 150

75 75 ELECTRICAL CONTROL UNITS Becker products are made in Germany, and are subject to high quality standards. That's what our Made in Germany seal stands for. Becker is your partner for energy efficiency. That's what our energy seal stands for. APPENDIX MECHANICAL

76 Wired control units Switch/button EasyControl EC41 Switch/button Can be used as latched or push-button switch One function for each button (UP, STOP, DOWN) Slim surface-mounted housing Item no.

Surface-mounted EasyControl EC42 Switch/button Can be used as latched or push-button switch One function for each button (UP, STOP, DOWN) an be fitted into any flush mounted switch box in mm diameter

76 76 Wired control units Switch/button EasyControl EC41 Switch/button Can be used as latched or push-button switch One function for each button (UP, STOP, DOWN) Slim surface-mounted housing Item no Colour Alpine white Rated voltage 230 V/AC / 50 Hz Switching current at cos Degree of protection IP20 Class of protection II Permissible ambient temperature 0 to +55 C Type of mounting Surface-mounted EasyControl EC42 Switch/button Can be used as latched or push-button switch One function for each button (UP, STOP, DOWN) an be fitted into any flush mounted switch box in mm diameter Item no Colour Alpine white Rated voltage 230 V/AC / 50 Hz Switching current at cos Degree of protection IP20 Class of protection II Permissible ambient temperature 0 to +55 C Type of mounting lush mounted mm diameter, wall mounting EasyControl EC52 Switch/button* Can be used as latched or push-button switch One function for each button (UP, STOP, DOWN) Adapter frame allows for integration in various flush-mounted switch ranges mm diameter Item no Colour Alpine white Rated voltage 230 V/AC / 50 Hz Switching current at cos Degree of protection IP20 Class of protection II Permissible ambient temperature 0 to +55 C Type of mounting lush mounted mm diameter, wall mounting * Note: Adapter frames can be found on page 147.

77 77 Dimensions Functional principle typical wiring diagrams Tubular drive 84 mm EC41 52 mm 59 mm Tubular drive 85.4 mm 54 mm 29 mm 24 mm EC42 CONTROL UNITS ELECTRICAL Tubular drive 85.4 mm 54 mm 29 mm 24 mm EC52 APPENDIX MECHANICAL

78 78 Wired control units Switch/button EasyControl EC711 1-channel wall transmitter Also compatible with Centronic and KNX-RF radio standard Simple wall mounting 1-channel wall transmitter with LED display Can be integrated into switching ranges from many manufacturers: Berker: S1, B3, B7/Gira: Standard, E2, Event, Esprit/Jung: AS, A500, A-Creation, A-Creation-Glas, A-Plus/Merten: M-Smart, M-Arc, M-Plan, M-Plan-Glas, M1, Attelier, M-Star/Hager: kallysto.pur, kallysto.stil, kallysto.art/peha: Aura/ELSO: Joy/Busch-Jaeger: Balance-SI, as well as additional manufacturers with x mm central board dimensions Single, group or central control unit Item no Colour White Rated voltage 3 V/DC Battery type CR 2032 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz Type of mounting Surface-mounted EasyControl EC715 1-channel wall transmitter Also compatible with Centronic and KNX-RF radio standard Simple wall mounting 5 channels with LED display Can be integrated into switching ranges from many manufacturers: Berker: S1, B3, B7/Gira: Standard, E2, Event, Esprit/Jung: AS, A500, A-Creation, A-Creation-Glas, A-Plus/Merten: M-Smart, M-Arc, M-Plan, M-Plan-Glas, M1, Attelier, M-Star/Hager: kallysto.pur, kallysto.stil, kallysto.art/peha: Aura/ELSO: Joy/Busch-Jaeger: Balance-SI, as well as additional manufacturers with x mm central board dimensions Single, group or central control unit Item no Colour White Rated voltage 3 V/DC Battery type CR 2032 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz Type of mounting Surface-mounted

Cent ro I 4034 200 22 1 0 IP 20 230V/50H z µ 3A 230 V ~ L L Ind.

79 Cent ro I IP V/50H z µ 3A 230 V ~ L L Ind. Ind. L Cent ro I IP V/50H z N N N µ 3A 230 V ~ L L Ind. Ind. L N N N 79 Dimensions Functional principle typical wiring diagrams Radio drive Tubular drive Radio receiver EC711 EC mm Radio drive Tubular drive Radio receiver CONTROL UNITS 55 mm EC715 APPENDIX MECHANICAL ELECTRICAL

80 Wired control units Single and group control units UnitControl UC42 Single and group control unit Can be combined with any switch range Simple installation behind the operator control in any deep

80 80 Wired control units Single and group control units UnitControl UC42 Single and group control unit Can be combined with any switch range Simple installation behind the operator control in any deep flush-mounted switch box Can be integrated upstream of timers and sun protection controls Blind mode: Exact adjustment of blind laths in touch mode Potential-free connection is possible Item no Rated voltage 230 V/AC / 50 Hz Switching current at cos Degree of protection IP30 Class of protection II Permissible ambient temperature 40 to +70 C Type of mounting lush mounted mm diameter, wall mounting UC45 Single and group control unit for switch cabinet mounting Item no (UC45) UnitControl UC52 Single and group control unit* Slide switch for easy changing between manual and automatic mode An additional operator control can be connected Enables the programming of 2 freely selectable intermediate positions Blind mode: Exact adjustment of blind laths in touch mode Item no Colour Alpine white Rated voltage 230 V/AC / Hz Switching current at cos Degree of protection IP20 Class of protection II Permissible ambient temperature 0 to +55 C Type of mounting lush mounted mm diameter, wall mounting * Note: Adapter frames can be found on page 147.

81 AUTO Centronic UnitCont rol UC V / 50Hz / 4V M Imax 5 A M C L L N Ind. Ind. Zentral Zentral L N A AUTO AUTO Zentral Zentral Ind. Ind. Centronic UnitCont rol UC N L 230V / 50Hz / 4V L C L N A M Imax 5A M 81 Dimensions Functional principle typical wiring diagrams 47 mm Tubular drive Tubular drive UC 42 UC mm Up/down button for individual Central, timer TC52 Up/down button for individual 22 mm 54 mm CONTROL UNITS Tubular drive Tubular drive 54 mm diameter 85.5 mm UC52 Individual UC52 Central UC52 Individual ELECTRICAL 33.3 mm 21.4 mm APPENDIX MECHANICAL

82 Wired control units Memory button MemoControl MC42 Memory button* Easy programming of 2 switching times (daily repetition) Slide switch for easy changing between manual and automatic mode Enables

82 82 Wired control units Memory button MemoControl MC42 Memory button* Easy programming of 2 switching times (daily repetition) Slide switch for easy changing between manual and automatic mode Enables the programming of 2 freely selectable intermediate positions Blind mode: Exact adjustment of blind laths in touch mode Item no Colour Alpine white Rated voltage V/AC / Hz Switching current at cos Degree of protection IP20 Class of protection II Permissible ambient temperature 0 to +55 C Type of mounting lush mounted mm diameter, wall mounting * Note: Adapter frames can be found on page 147.

83 AUTO 83 Dimensions Functional principle typical wiring diagrams Tubular drive 54 mm 54 mm diameter MC mm 30.8 mm 21.4 mm APPENDIX MECHANICAL ELECTRICAL CONTROL UNITS

84 84 Wired control units Timers TimeControl TC42 Timer* Preprogrammed date, time and switching time function Block switching function (Mon Fri, Sat Sun) Slide switch for easy changing between manual and automatic mode Astronomical function for the evening saves readjusting the switching time Holiday function and automatic summer/winter time adjustment Enables the programming of 2 freely selectable intermediate positions Blind mode: Exact adjustment of blind laths in touch mode Item no Colour Alpine white Rated voltage V/AC / Hz Switching current at cos Battery type CR 2032 Degree of protection IP20 Class of protection II Permissible ambient temperature 0 to +55 C Type of mounting lush mounted mm diameter, wall mounting TimeControl TC52 Timer for light sensor* Functions as the TC42, but also includes: Two different week, block and day switching programs can be set Astronomical function for morning and evening saves readjusting the switching time Light sensor SC43 can be connected Item no Colour Alpine white Rated voltage V/AC / Hz Switching current at cos Battery type CR 2032 Degree of protection IP20 Class of protection II Permissible ambient temperature 0 to +55 C Type of mounting lush mounted mm diameter, wall mounting SC43 light sensor Cable can be shortened Item no (2 m cable) Item no (5 m cable) * Note: Adapter frames can be found on page 147.

85 85 Dimensions Functional principle typical wiring diagrams Tubular drive 54 mm 54 mm diameter TC mm 30.8 mm 21.4 mm 54 mm CONTROL UNITS Tubular drive Tubular drive 54 mm diameter 85.5 mm TC52 Individual SC43 TC52 Central SC43 TC52 Individual ELECTRICAL 30.8 mm 21.4 mm APPENDIX MECHANICAL

86 Wired control units Wind and sun protection control unit SunWindControl SWC62 Sun/wind control unit* Intermediate positions can be programmed using UP/STOP/DOWN buttons Daily, block and weekly

86 86 Wired control units Wind and sun protection control unit SunWindControl SWC62 Sun/wind control unit* Intermediate positions can be programmed using UP/STOP/DOWN buttons Daily, block and weekly program Separate rain/temperature input, can be used as central input Date, time and threshold values preset Slide switch for easy changing between manual and automatic mode Automatic shade time individually adjustable Automatic summer/winter time adjustment Enables the programming of 2 freely selectable intermediate positions Single, group or central control unit Wind, light, rain and temperature sensors can be connected Item no Colour Alpine white Rated voltage 230 V/AC / 50 Hz Switching current at cos Battery type CR 2032 Degree of protection IP20 Permissible ambient temperature 0 to +55 C Type of mounting lush mounted mm diameter, wall mounting * Note: Adapter frames can be found on page 147.

87 87 Dimensions Functional principle typical wiring diagrams 54 mm SC81 Rain sensor 85.5 mm Room thermostat SWC62 Evaluation device 54 mm diameter 30.8 mm 21.4 mm APPENDIX MECHANICAL ELECTRICAL CONTROL UNITS

88 88 Wired control units Sensors SensorControl SC71 Wind sensor For sun/wind control unit SWC62 Convenient setting of wind threshold values on SWC62 Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Item no Colour Light grey Degree of protection IP44 Permissible ambient temperature 25 to +55 C SensorControl SC81 Sun/wind sensor For sun/wind control unit SWC62 Convenient setting of sun and wind threshold values on SWC62 Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Item no Colour Light grey Degree of protection IP44 Permissible ambient temperature 25 to +55 C

89 89 Dimensions Functional principle typical wiring diagrams Tubular drive 150 mm 190 mm 50 mm Tubular drive 150 mm 190 mm 50 mm APPENDIX MECHANICAL CONTROL UNITS ELECTRICAL

90 Wired control units Wind and sun protection sets WindSet WS11 Wind sensor with automatic wind protection Simple setting of the wind threshold value Supports latched switch

4020 000 042 0 WA10 SC71 Colour Light grey Light grey Rated voltage 230 V/AC / 50 Hz Switching current 5 A / 230 240 V at cos Degree of protection IP44 IP44 Permissible

SWC62 Convenient setting of sun and wind threshold values on SWC62 Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Item no.

90 90 Wired control units Wind and sun protection sets WindSet WS11 Wind sensor with automatic wind protection Simple setting of the wind threshold value Supports latched switch connection Status LED Can be used for awnings and blinds Item no WA10 SC71 Colour Light grey Light grey Rated voltage 230 V/AC / 50 Hz Switching current 5 A / V at cos Degree of protection IP44 IP44 Permissible ambient temperature 25 to +55 C 25 to +55 C Type of mounting Surface-mounted SunWindSet SWS52 Sun/wind control unit with sensor Sun and wind sensor for sun/wind control unit SWC62 Convenient setting of sun and wind threshold values on SWC62 Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Item no SWC62 SC81 Colour White Light grey Rated voltage 230 V/AC / 50 Hz Switching current 5 A / V at cos Battery type CR2032 Degree of protection IP20 IP44 Class of protection II Permissible ambient temperature Type of mounting 0 to +55 C 25 to +55 C Flush-mounted 58 mm diameter

91 91 Dimensions Functional principle typical wiring diagrams Tubular drive 95 mm 150 mm 190 mm 50 mm 130 mm 58 mm CONTROL UNITS 150 mm 190 mm 50 mm Tubular drive ELECTRICAL 85.5 mm 54 mm 54 mm diameter 33.3 mm 21.4 mm APPENDIX MECHANICAL

92 92 Centronic radio control units Radio transmitters EasyControl EC411 1-channel wall transmitter Enables the programming of 2 freely selectable intermediate positions Simple wall mounting Can also be used as hand-held device Can be integrated into switching ranges from many manufacturers: Berker: S1, B3, B7/Gira: Standard, E2, Event, Esprit/Jung: AS, A500, A-Creation, A-Creation-Glas, A-Plus/Merten: M-Smart, M-Arc, M-Plan, M-Plan-Glas, M1, Attelier, M-Star/Hager: kallysto.pur, kallysto.stil, kallysto.art/peha: Aura/ELSO: Joy/Busch-Jaeger: Balance-SI, as well as additional manufacturers with x mm central board dimensions Single or central control unit Item no Colour White Rated voltage 3 V/DC Battery type CR2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz Type of mounting Surface-mounted MemoControl MC415 5-channel wall transmitter with memory function Enables the programming of 2 freely selectable intermediate positions Simple wall mounting Can also be used as hand-held device Can be integrated into switching ranges from many manufacturers: Berker: S1, B3, B7/Gira: Standard, E2, Event, Esprit/Jung: AS, A500, A-Creation, A-Creation-Glas, A-Plus/Merten: M-Smart, M-Arc, M-Plan, M-Plan-Glas, M1, Attelier, M-Star/Hager: kallysto.pur, kallysto.stil, kallysto.art/peha: Aura/ELSO: Joy/Busch-Jaeger: Balance-SI, as well as additional manufacturers with x mm central board dimensions Single or central control unit 5 channels with LED display Easy programming of 2 switching times (daily repetition) per channel Switching times not lost when battery changed Changeover switch for easy changing between manual and automatic mode Item no Colour White Rated voltage 3 V/DC Battery type CR2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz Type of mounting Surface-mounted

Cent ro 4034 200 22 1 0 IP 20 230V/50H z µ 3A 230 V ~ L L Ind.

93 Cent ro IP V/50H z µ 3A 230 V ~ L L Ind. Ind. L N N N 93 Dimensions Functional principle typical wiring diagrams Radio drive Tubular drive Radio receiver EC411 EC mm Radio drive Tubular drive Radio receiver CONTROL UNITS 80 mm APPENDIX MECHANICAL ELECTRICAL

94 Centronic radio control units Radio transmitters TimeControl TC511 Wall transmitter with timer* Weekly, block and daily switching program Astronomical function for morning and evening saves

94 94 Centronic radio control units Radio transmitters TimeControl TC511 Wall transmitter with timer* Weekly, block and daily switching program Astronomical function for morning and evening saves readjusting the switching times Holiday function and automatic summer/winter time adjustment Enables the programming of 2 freely selectable intermediate positions Light sensor SC43 can be connected Single or central control unit Preprogrammed date, time and switching time function Item no Colour Alpine white Rated voltage 3 V/DC Battery type LR03 (AAA) Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz Type of mounting Surface-mounted SC43 light sensor Cable can be shortened Item no (2 m cable) Item no (5 m cable) EasyControl EC141-II 1-channel hand-held transmitter 1 channel with LED display Enables the programming of 2 freely selectable intermediate positions Single or central control unit Metal ring for attachment to key ring Item no Colour Black Rated voltage 3 V/DC Battery type CR 2032 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz * Note: Adapter frames can be found on page 147.

95 Cent ro I IP V/50H z µ 3A 230 V ~ L L Ind. Ind. L N N N 95 Dimensions Functional principle typical wiring diagrams 54 mm Radio drive Tubular drive Radio receiver TC511 SC43 TC511 SC mm 28.2 mm 63.5 mm CONTROL UNITS 81.5 mm Radio drive Tubular drive Radio receiver 34.5 mm 11 mm APPENDIX MECHANICAL ELECTRICAL

96 Centronic radio control units Radio transmitters EasyControl EC145-II 5-channel hand-held transmitter 5 channel with LED display Enables the programming of 2 freely selectable intermediate

96 96 Centronic radio control units Radio transmitters EasyControl EC145-II 5-channel hand-held transmitter 5 channel with LED display Enables the programming of 2 freely selectable intermediate positions Single, group or central control unit Metal ring for attachment to key ring Item no Colour Black Rated voltage 3 V/DC Battery type CR 2032 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz EasyControl EC241-II 1-channel hand-held transmitter Hand-held transmitter for controlling a Beck-O-Tronic 5 Centronic, a VC280-II and a Beck-O-Mat 1 channel with LED display Metal ring for attachment to key ring Item no Colour Black Rated voltage 3 V/DC Battery type CR 2032 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz EasyControl EC245-II 5-channel hand-held transmitter Hand-held transmitter for controlling a Beck-O-Tronic 5 Centronic, a VC280-II and a Beck-O-Mat 5 channels with LED display Metal ring for attachment to key ring Item no Colour Black Rated voltage 3 V/DC Battery type CR 2032 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz

97 97 Dimensions Functional principle typical wiring diagrams 63.5 mm 63.5 mm 81.5 mm 34.5 mm 11 mm 81.5 mm 34.5 mm 11 mm Radio drive Tubular drive Radio receiver CONTROL UNITS ELECTRICAL 63.5 mm 81.5 mm 34.5 mm 11 mm APPENDIX MECHANICAL

98 Centronic radio control units Radio transmitters EasyControl EC541-II 1-channel hand-held transmitter Enables the programming of 2 freely selectable intermediate positions Wall bracket with rear

4034 000 201 1 (black) Colour White / black Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency 868.

98 98 Centronic radio control units Radio transmitters EasyControl EC541-II 1-channel hand-held transmitter Enables the programming of 2 freely selectable intermediate positions Wall bracket with rear labelling panel Single or central control unit Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz EasyControl EC545-II 5-channel hand-held transmitter 5 channels with LED display Enables the programming of 2 freely selectable intermediate positions Wall bracket with rear labelling panel Single, group or central control unit Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz EasyControl EC5410-II 10-channel hand-held transmitter Easy-to-read 10-channel display with 3-coloured LEDs Enables the programming of 2 freely selectable intermediate positions Wall bracket with rear labelling panel Single, group or central control unit Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz

99 Cent ro I IP V/50H z Cent ro I IP V/50H z µ 3A 230 V ~ L L Ind. Ind. L N N N µ 3A 230 V ~ L L Ind. Ind. L N N N Cent ro I IP V/50H z µ 3A 230 V ~ L L Ind. Ind. L N N N 99 Dimensions Functional principle typical wiring diagrams Radio drive Tubular drive Radio receiver 123 mm EC541-II EC541-II 39 mm 21 mm 123 mm Radio drive Tubular drive Radio receiver CONTROL UNITS 39 mm 21 mm ELECTRICAL 123 mm 39 mm 21 mm Radio drive EC5410-II Tubular drive Radio receiver APPENDIX MECHANICAL

100 100 Centronic radio control units Radio transmitters MemoControl MC441-II Hand-held transmitter with memory function Easy programming of 2 switching times (daily repetition) Switching times not lost when battery changed Slide switch for easy changing between manual and automatic mode Enables the programming of 2 freely selectable intermediate positions Wall bracket with rear labelling panel Single or central control unit Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz TimeControl TC445-II 5-channel hand-held transmitter with timer Preprogrammed date, time and switching time function Block switching function (Mon Fri, Sat Sun) Slide switch for easy changing between manual and automatic mode Astronomical function for the evening saves readjusting the switching time Holiday function and automatic summer/winter time adjustment Enables the programming of 2 freely selectable intermediate positions Wall bracket with rear labelling panel Single, group or central control unit Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type LR03 (AAA) Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz TimeControl TC4410-II 10-channel hand-held transmitter with channel-specific timers Functions as the TC445-II, but also includes: 10 individually programmable channels for 10 separate receivers or 10 receiver groups Slide switch allows automatic mode to be activated/deactivated easily for individual channels or all channels simultaneously Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type LR03 (AAA) Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz

101 5 M OK 5 M OK Cent ro IP V/50H z µ 3A 230 V ~ L L Ind. Ind. L Cent ro IP V/50H z N N N µ 3A 230 V ~ L L Ind. Ind. L Cent ro IP V/50H z N N N µ 3A 230 V ~ L L Ind. Ind. L N N N 101 Dimensions Functional principle typical wiring diagrams Radio drive Tubular drive Radio receiver 123 mm MC441-II MC441-II 39 mm 21 mm 182 mm Radio drive 20 o clock TC445-II Tubular drive Radio receiver CONTROL UNITS 41 mm 20 mm ELECTRICAL 182 mm 41 mm 20 mm Radio drive 19 o clock o clock TC4410-II Tubular drive Radio receiver APPENDIX MECHANICAL

102 Centronic radio control units Radio transmitters EasyControl EC611 1-channel code button Drive commands are only performed once the correct opening code has been entered Simple wall mounting

102 102 Centronic radio control units Radio transmitters EasyControl EC611 1-channel code button Drive commands are only performed once the correct opening code has been entered Simple wall mounting Individual code assignment possible Suitable for outdoor assembly Single or central control unit Stable metal keyboard Keypad illumination Item no Colour Silver Rated voltage 9 V/DC Battery type E-Block, 6LR61 Degree of protection IP65 Permissible ambient temperature 10 to +55 C Radio frequency MHz Type of mounting Surface-mounted VarioControl VC421 Flush-mounted radio transmitter Switch inputs allow Becker radio products to be operated using wired control units from other manufacturers Central inputs for compatible wired Centronic control units Single or central control unit Item no Rated voltage Degree of protection Class of protection V/AC / Hz IP20 II Permissible ambient temperature 0 to +55 C Type of mounting Flush-mounted in switch box in 58 mm diameter Radio frequency MHz SunWindControl SWC241-II 1-channel hand-held transmitter with wind threshold value setting Convenient setting of the wind threshold value at the transmitter Enables the programming of 2 freely selectable intermediate positions Wall bracket with rear labelling panel Single or central control unit Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz

103 Centronic VarioContr ol VC IP V/50H z N 230V/50H z/4v A L L N L Ze ntral Ze ntral Ind. Ind. Made in Ge rmany P Cent ro IP V/50H z µ 3A 230 V ~ L L Ind. Ind. L N N N 103 Dimensions Connecting diagram Functional principle typical wiring diagrams 31 mm 145 mm BOT 6 Centronic EC mm 47 mm 49 mm Radio drive VC421 UP/DOWN Tubular drive Radio receiver CONTROL UNITS 28 mm 123 mm ELECTRICAL 39 mm 21 mm Radio drive Radio drive APPENDIX MECHANICAL

104 104 Centronic radio control units Radio transmitters SunWindControl SWC245-II 5-channel hand-held transmitter with wind threshold value setting 5 channels with LED display Convenient setting of the wind threshold value at the transmitter Enables the programming of 2 freely selectable intermediate positions Wall bracket with rear labelling panel Single or central control unit Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz SunWindControl SWC441-II Hand-held transmitter with sun/wind threshold value setting Convenient setting of sun and wind threshold values at the transmitter Slide switch for easy changing between manual and automatic mode Enables the programming of 2 freely selectable intermediate positions Wall bracket with rear labelling panel Single or central control unit Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz SunWindControl SWC442-II 2-channel hand-held transmitter for sun, wind and light control Functions as the SWC441-II, but also includes: Light button (2nd channel) for ON/OFF switching and dimming (with VC220 radio dimmer) of lights and lighting systems Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz * Note: Adapter frames can be found on page 147.

105 105 Dimensions Functional principle typical wiring diagrams Radio drive Radio drive 123 mm 39 mm 21 mm 123 mm Radio drive Tubular drive CONTROL UNITS 39 mm 21 mm 123 mm ELECTRICAL 39 mm 21 mm Radio drive APPENDIX MECHANICAL

106 Centronic radio control units Radio transmitters SunWindControl SWC445-II 5-channel hand-held transmitter with sun and wind threshold value setting 5 channels with LED

freely selectable intermediate positions Wall bracket with rear labelling panel Single or central control unit Item no. 4033 000 214 0 (white) Item no.

3 MHz SunWindControl SWC745-II 5-channel hand-held transmitter with channelspecific threshold value setting and display Date, time and threshold values preset Slide switch for

nables the programming of freely selectable intermediate positions per channel Wall bracket with rear labelling panel Single, group or central control unit Item no.

106 106 Centronic radio control units Radio transmitters SunWindControl SWC445-II 5-channel hand-held transmitter with sun and wind threshold value setting 5 channels with LED display Convenient setting of sun and wind threshold values at the transmitter Slide switch for easy changing between manual and automatic mode Enables the programming of 2 freely selectable intermediate positions Wall bracket with rear labelling panel Single or central control unit Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz SunWindControl SWC745-II 5-channel hand-held transmitter with channelspecific threshold value setting and display Date, time and threshold values preset Slide switch for easy changing between manual and automatic mode Automatic shade time, and threshold values can be adjusted separately for each channel Automatic summer/winter time adjustment nables the programming of freely selectable intermediate positions per channel Wall bracket with rear labelling panel Single, group or central control unit Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type LR03 (AAA) Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz

107 107 Dimensions Functional principle typical wiring diagrams Radio drive Tubular drive 182 mm 123 mm 39 mm 21 mm CONTROL UNITS 41 mm 20 mm APPENDIX MECHANICAL ELECTRICAL

108 108 Centronic radio control units Radio receivers UnitControl UC520 Single control unit with radio receiver* Convenient setting of sun and wind threshold values at the transmitter Slide switch for easy changing between manual and automatic mode Enables the programming of 2 freely selectable intermediate positions Single or central control unit Item no Rated voltage V/AC / Hz Switching current at cos Degree of protection IP20 Class of protection II Permissible ambient temperature 0 to +55 C Type of mounting lush mounted mm diameter, wall mounting Radio frequency MHz VarioControl VC180-II Radio socket Switches various different 230 V plug-in devices ON/OFF Enables reduction of standby current consumption Timed ON/OFF switching of powered devices Enables switching between scenes Can be programmed to recognise up to 15 Centronic transmitters Control button on the device Item no Colour Alpine white Rated voltage V/AC / 50 Hz Switching capacity max. cos Degree of protection IP20 Permissible ambient temperature 20 to +35 C Radio frequency MHz VarioControl VC280-II Radio socket with pulse output Operation of any 230 V door drives with pulse input Control button on the device Can be programmed to recognise up to 15 Centronic transmitters Item no Colour Alpine white Rated voltage V/AC / 50 Hz Powered unit connection max. cos Floating pulse output max max Degree of protection IP20 Class of protection II Permissible ambient temperature 20 to +35 C Radio frequency MHz * Note: Adapter frames can be found on page 147.

109 109 Dimensions Functional principle typical wiring diagrams 54 mm Tubular drive Tubular drive 85.5 mm UC520 Individual UC520 Individual UC520 Group 54 mm diameter 33.3 mm 21.4 mm 68 mm 116 mm 49 mm EC545-II VC180-II CONTROL UNITS ELECTRICAL 68 mm 116 mm 49 mm EC242-II VC280 APPENDIX MECHANICAL

110 Centronic radio control units Radio receivers VarioControl VC220 Radio dimmer for lighting equipment ON/OFF switching and dimming of lamps Single, group and central control of lamps and lighting

4034 000 016 0 Rated voltage 230 240 V/AC / 50 Hz Switching capacity W cos Degree of protection IP44 Class of protection II (when properly installed) Permissible ambient temperature 25 to +55 C Radio

110 110 Centronic radio control units Radio receivers VarioControl VC220 Radio dimmer for lighting equipment ON/OFF switching and dimming of lamps Single, group and central control of lamps and lighting equipment Special sun protection hand-held transmitter SWC442-II with separate light/dimmer switch available Can be programmed to recognise up to 16 Centronic transmitters Item no Rated voltage V/AC / 50 Hz Switching capacity W cos Degree of protection IP44 Class of protection II (when properly installed) Permissible ambient temperature 25 to +55 C Radio frequency MHz Type of mounting In the sun protection system VarioControl VC220h Radio switch for heaters Switching heaters up to 3,000 W Time-controlled switch-off of the heating function in two stages at 60/120 min. Can be programmed to recognise up to 16 Centronic transmitters Item no Rated voltage V/AC / 50 Hz Switching capacity, W cos Degree of protection IP44 Class of protection II (when properly installed) Permissible ambient temperature 25 to +55 C Radio frequency MHz Power line 0.5 m Device cable 1.0 m VarioControl VC320 Flush-mounted radio receiver Compact design ideal for mounting in the shutter box Programming and setting up of groups possible without having to access the receiver Programmable memory switching time Can be combined with the SC431-II light sensor Enables the programming of 2 freely selectable intermediate positions Can be programmed to recognise up to 16 Centronic transmitters Item no Rated voltage V/AC / Hz Switching current at cos Degree of protection IP42 Class of protection II Permissible ambient temperature 25 to +55 C Type of mounting In shutter box Radio frequency MHz

111 Dimensions Centronic Va rio Control VC V/50Hz, 400W, co s = 1 IP 44 φ 0614 Made in Germ any V AC Ce ntroni c Vario Control VC V /50Hz, 400W, cos φ = 1 IP Ma de in Ge rman y V AC 111 Connecting diagram Functional principle typical wiring diagrams Radio drive VC mm 39 mm diameter Radio drive SWC mm Heating radiator 3 kw VC220h SWC745-II CONTROL UNITS 39 mm diameter 50 mm ELECTRICAL Tubular drive 105 mm 22 mm Mains 230 V / 50 Hz APPENDIX MECHANICAL

112 Centronic radio control units Radio receivers VarioControl VC420-II Flush-mounted radio receiver Any kind of button can be connected Can be used as a lighting control unit Blind mode: Exact

112 112 Centronic radio control units Radio receivers VarioControl VC420-II Flush-mounted radio receiver Any kind of button can be connected Can be used as a lighting control unit Blind mode: Exact adjustment of blind laths in touch mode Enables the programming of 2 freely selectable intermediate positions Can be programmed to recognise up to 16 transmitters Compatible with the SC211 awning movement sensor Item no Rated voltage Switching current Degree of protection V/AC / Hz at cos IP20 Permissible ambient temperature 25 to +55 C Type of mounting Flush-mounted in switch box in 58 mm diameter Radio frequency MHz VarioControl VC410-II Surface-mounted radio receiver Item no VarioControl VC520 Floating radio receiver Potential-free switching contact Blind mode: Exact adjustment of blind laths in touch mode Enables the programming of 2 freely selectable intermediate positions Can be programmed to recognise up to 16 Centronic transmitters Item no Rated voltage Switching current Degree of protection V/AC / Hz at cos IP20 Class of protection II Permissible ambient temperature 0 to +55 C Type of mounting Flush-mounted in switch box in 58 mm diameter Radio frequency MHz

113 L L Cent ro I IP V/50Hz µ 3A 230 V ~ L L Ind. Ind. L M M C N N N Centronic VarioContr ol VC V/50Hz/4 VA Jal. / Rol. AS / G S L L N LN 113 Dimensions Connecting diagram Functional principle typical wiring diagrams 47 mm Tubular drive VC420-II 49 mm Individual EC541-II 28 mm 47 mm green-yellow blue Tubular drive Tubular drive VC520 CONTROL UNITS 49 mm brown / black black / brown GS N MC441-II 28 mm APPENDIX MECHANICAL ELECTRICAL

114 114 Centronic radio control units Radio receivers VarioControl VC470-II Plug-in radio receiver Awning and blind mode Standardised plug connection Intermediate and turnover position Memo function Storage of threshold value Adjustable direction of rotation Item no Rated voltage 230 V/AC / 50 Hz Switching current at cos Degree of protection IP54 Class of protection II (when properly installed) Permissible ambient temperature 25 to +55 C Type of mounting In or on head rail Radio frequency MHz Surface-mounted housing for VC470-II Item no Colour Dimensions (W x H x D) White 327 x 50 x 50 mm Radio sensors SensorControl SC431-II Radio light sensor Shade and twilight function Integrated glass breakage sensor Combined UP/STOP/DOWN travel button All operator controls can be accessed without opening the housing Easy mounting on the window pane Item no Colour Alpine white Battery type CR 2032 Degree of protection IP20 Permissible ambient temperature 0 to +55 C Radio frequency MHz

115 Centronic VarioControl VC470-II V / 50 Hz, 5 A~ cos = 1 IP Made in Germany Cent ro I IP V/50H z µ 3A 230 V ~ L L Ind. Ind. L N N N 115 Dimensions Connecting diagram Functional principle typical wiring diagrams Tubular drive 130 mm Tubular drive 2 = black 1 = N (blue) = protective conductor (green-yellow) 3 = brown Fastening clip 4x 33 mm Mains 230 V / 50 Hz Tubular drive Tubular drive protective conductor (green-yellow) = 1 = N (blue) 2 = L1 (black) 32 mm CONTROL UNITS 47.5 mm diameter Radio drive Tubular drive Radio receiver ELECTRICAL 13.5 mm SC431-II SC431-II APPENDIX MECHANICAL

116 Centronic radio control units Radio sensors SensorControl SC211-II Awning radio movement sensor Sensor specially for articulated-arm awning* Discrete mounting directly on front section Optimum

threshold values at the transmitter (e. g. SWC241-II) Can be combined with solar sun sensor SC561 Item no.

frequency 868.3 MHz Conversion kit for black SC211-II housing Item no.

116 116 Centronic radio control units Radio sensors SensorControl SC211-II Awning radio movement sensor Sensor specially for articulated-arm awning* Discrete mounting directly on front section Optimum monitoring of wind movements directly on the front section of the awning Tilt sensor safeguards the awning against overloads, such as those caused by water collection Convenient setting of wind threshold values at the transmitter (e. g. SWC241-II) Can be combined with solar sun sensor SC561 Item no Colour Rated voltage Battery type White 3 V/DC LR03 (AAA) Degree of protection IP44 Permissible ambient temperature 25 to +55 C Type of mounting Directly on the front section Radio frequency MHz Conversion kit for black SC211-II housing Item no SunWindControl SWC510 Sun-wind sensor with integrated radio receiver Ideal for retrofitting a wired sun protection drive with radio control unit and sun/wind monitoring Convenient setting of sun and wind threshold values at the transmitter (e. g. SWC441-II) Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Single or central control unit Item no Colour Light grey Degree of protection IP44 Permissible ambient temperature 25 to +55 C Radio frequency MHz * Note: The SC211-II is intended solely for the operation of an open, half-closed (semi-cassette), or fully closed (cassette) articulated-arm awning.

117 117 Dimensions Connecting diagram Functional principle typical wiring diagrams Radio drive 140 mm 39 mm 23 mm 150 mm Tubular drive CONTROL UNITS 190 mm brown/black black/brown blue green-yellow ELECTRICAL 50 mm APPENDIX MECHANICAL

118 Centronic radio control units Radio sensors SensorControl SC711 Radio wind sensor Convenient setting of wind threshold values at the transmitter (e. g.

4033 000 036 0 Colour Light grey Degree of protection IP44 Permissible ambient temperature 25 to +55 C Radio frequency 868.

118 118 Centronic radio control units Radio sensors SensorControl SC711 Radio wind sensor Convenient setting of wind threshold values at the transmitter (e. g. SWC241-II) Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Single or central control unit Item no Colour Light grey Degree of protection IP44 Permissible ambient temperature 25 to +55 C Radio frequency MHz SensorControl SC811 Radio sun/wind sensor Convenient setting of sun and wind threshold values at the transmitter (e. g. SWC441-II) Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Single or central control unit Optional: Supports connection of rain sensor Item no Colour Light grey Degree of protection IP44 Permissible ambient temperature 25 to +55 C Radio frequency MHz SensorControl SC561 Solar radio sun sensor With integrated solar power supply, there is no need to lay cables to the main power supply Convenient setting of sun threshold values at the transmitter (e. g. SWC441-II) Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Single or central control unit Item no Colour Light grey Degree of protection IP44 Permissible ambient temperature 25 to +55 C Radio frequency MHz

119 119 Dimensions Connecting diagram Functional principle typical wiring diagrams Radio drive 150 mm 190 mm Radio receiver Tubular drive 50 mm Radio drive 150 mm 190 mm Radio receiver Tubular drive CONTROL UNITS 50 mm Radio drive ELECTRICAL 150 mm 190 mm 50 mm Radio receiver Tubular drive APPENDIX MECHANICAL

120 Centronic radio control units Radio sensors SensorControl SC861 Solar radio sun/wind sensor With integrated solar power supply, there is no need to lay cables to the main power

SWC441-II) Adjustable sensor foot for optimum mounting Can be used with exterior sun protection systems that do not serve as screening Single or central control unit Item no.

3 MHz SensorControl SC911 Radio sun/wind/rain sensor Integrated rain sensor Convenient setting of sun and wind threshold values at the transmitter (e. g.

120 120 Centronic radio control units Radio sensors SensorControl SC861 Solar radio sun/wind sensor With integrated solar power supply, there is no need to lay cables to the main power supply Convenient setting of sun and wind threshold values at the transmitter (e. g. SWC441-II) Adjustable sensor foot for optimum mounting Can be used with exterior sun protection systems that do not serve as screening Single or central control unit Item no Colour Light grey Degree of protection IP44 Permissible ambient temperature 25 to +55 C Radio frequency MHz SensorControl SC911 Radio sun/wind/rain sensor Integrated rain sensor Convenient setting of sun and wind threshold values at the transmitter (e. g. SWC441-II) Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Single or central control unit Item no Colour Light grey Degree of protection IP44 Permissible ambient temperature 25 to +55 C Radio frequency MHz Mounting bracket Item no Dimensions 110 x 200 mm Item no Dimensions 110 x 400 mm

Cent ro I 4034 200 2 21 0 IP 20 230V/50H z µ 3A 230 ~ L L Ind.

121 Cent ro I IP V/50H z µ 3A 230 ~ L L Ind. Ind. L N N N 121 Dimensions Connecting diagram Functional principle typical wiring diagrams Radio drive 150 mm 190 mm Radio receiver Tubular drive 50 mm 190 mm 150 mm SWC441-II Radio drive SC911 CONTROL UNITS 50 mm VRadio receiver Tubular drive SC911 SWC441-II APPENDIX MECHANICAL ELECTRICAL

122 Centronic radio control units Radio sets Roller shutter Vario set RVS241-II Hand-held transmitter with radio receiver Programming and setting up of groups possible without having to access the

protection IP20 IP55 Class of protection II (when properly installed) II (when properly installed) Permissible ambient temperature 10 to +55 C 25 to +55 C Type of mounting Including wall bracket

122 122 Centronic radio control units Radio sets Roller shutter Vario set RVS241-II Hand-held transmitter with radio receiver Programming and setting up of groups possible without having to access the receiver Any kind of button can be connected Can also be used as lighting control unit Blind mode: Exact adjustment of blind laths in touch mode Enables the programming of 2 freely selectable intermediate positions Item no EC541-II VC410-II Colour White Light grey Rated voltage 3 V/DC V/AC / 50 Hz Switching current 3 A / V at cos 3 A / V at cos Battery type CR2430 CR2430 Degree of protection IP20 IP55 Class of protection II (when properly installed) II (when properly installed) Permissible ambient temperature 10 to +55 C 25 to +55 C Type of mounting Including wall bracket Surface-mounted Radio frequency MHz MHz Cable diameter dia mm Sun Vario set SVS241-II Hand-held transmitter with radio receiver Simple radio retrofitting of a motorised sun protection system Receiver with standardised plug connection Awning and blind mode Sun/wind sensors are easy to retrofit Enables the programming of 2 freely selectable intermediate positions Direction of rotation easy to reverse Item no EC541-II VC470-II Colour White Light grey Rated voltage 3 V/DC 230 V/AC / 50 Hz Switching current 5 A / V at cos Battery type CR2430 Degree of protection IP20 IP20 Class of protection II (when properly installed) II (when properly installed) Permissible ambient temperature 10 to +55 C 25 to +55 C Type of mounting Including wall bracket In or on head rail, surface-mounted housing available on request Radio frequency MHz MHz

123 Centronic VarioControl VC470-II V / 50 Hz, 5 A~ cos = 1 IP Made in Germany M N Centronic Va rio Control VCJ470-I I V/50Hz, 5A - co s φ = 1 IP Made in Germany N L IN 123 Dimensions Connecting diagram Functional principle typical wiring diagrams 123 mm Tubular drive VC410-II 39 mm 21 mm EC541-II 84 mm 41 mm CONTROL UNITS 123 mm 39 mm 21 mm Tubular drive 2 = black 1 = N (blue) = protective conductor (green-yellow) 3 = brown Fastening clip 4x Tubular drive ELECTRICAL VC470-II 130 mm mm 32 mm Mains 230 V / 50 Hz protective conductor (green-yellow) = 1 = N (blue) 2 = L1 (black) EC541-II APPENDIX MECHANICAL

124 Centronic radio control units Radio sets SunWindSet SWS241-II Sun/wind control unit with integrated radio receiver with hand-held transmitter for wired drives Convenient setting of sun and wind

protection drive with radio control unit and automatic sun protection/wind monitoring Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Single or central

124 124 Centronic radio control units Radio sets SunWindSet SWS241-II Sun/wind control unit with integrated radio receiver with hand-held transmitter for wired drives Convenient setting of sun and wind threshold values at transmitter SWC441-II Slide switch for easy changing between manual and automatic mode Sun and wind sensor with integrated radio receiver Ideal for retrofitting a wired sun protection drive with radio control unit and automatic sun protection/wind monitoring Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Single or central control unit Item no SWC441-II SWC510 Colour White Light grey Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 IP44 Permissible ambient temperature 10 to +55 C 25 to +55 C Radio frequency MHz MHz SunWindSet SWS441-II Radio sun/wind sensor with hand-held transmitter For controlling a radio drive or an external radio receiver Convenient setting of sun and wind threshold values at transmitter SWC441-II Slide switch for easy changing between manual and automatic mode Adjustable sensor foot for optimum mounting Universally applicable for exterior sun protection Single or central control unit Sensor for 230 V mains connection Optional: Supports connection of rain sensor Item no SWC441-II SC811 Colour White Light grey Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 IP44 Permissible ambient temperature 10 to +55 C 25 to +55 C Radio frequency MHz MHz

125 125 Dimensions Connecting diagram Functional principle typical wiring diagrams 150 mm 190 mm 50 mm Tubular drive 123 mm brown/black black/brown blue green-yellow 39 mm 21 mm 150 mm CONTROL UNITS 190 mm 50 mm Radio drive ELECTRICAL 123 mm 39 mm 21 mm APPENDIX MECHANICAL

126 Centronic radio control units Radio sets SunWindSet SWS641-II Solar radio sun/wind sensor with hand-held transmitter For controlling a radio drive or an external radio receiver Convenient setting

main power supply Adjustable sensor foot for optimum mounting Can be used with exterior sun protection systems that do not serve as screening Single or central control unit Item no.

126 126 Centronic radio control units Radio sets SunWindSet SWS641-II Solar radio sun/wind sensor with hand-held transmitter For controlling a radio drive or an external radio receiver Convenient setting of sun and wind threshold values at transmitter SWC441-II Slide switch for easy changing between manual and automatic mode With integrated solar power supply, there is no need to lay cables to the main power supply Adjustable sensor foot for optimum mounting Can be used with exterior sun protection systems that do not serve as screening Single or central control unit Item no SWC441-II SC861 Colour White Light grey Rated voltage 3 V/DC Battery type CR 2430 Degree of protection IP20 IP44 Permissible ambient temperature 10 to +55 C 25 to +55 C Radio frequency MHz MHz

127 127 Dimensions Connecting diagram Functional principle typical wiring diagrams Radio drive 150 mm 123 mm 39 mm 21 mm 190 mm 50 mm APPENDIX MECHANICAL ELECTRICAL CONTROL UNITS

128 Centronic radio control units Beck-O-Tronic roller door control units for tubular drives Beck-O-Tronic 5 Centronic Door control unit for controlling a tubular drive with mechanical or electronic

light barrier can be connected (item no. 4906 000 116 0) Reverse travel on detection of an obstacle Electrical or optical safety contact edges can be connected External control sensor, e. g.

128 128 Centronic radio control units Beck-O-Tronic roller door control units for tubular drives Beck-O-Tronic 5 Centronic Door control unit for controlling a tubular drive with mechanical or electronic limit switching Integrated button and hand-held transmitter included with UP, STOP and DOWN step sequence Push-button input with UP, STOP and DOWN step sequence Outdoor light can be connected 230 V light barrier can be connected (item no ) Reverse travel on detection of an obstacle Electrical or optical safety contact edges can be connected External control sensor, e. g. key-operated push button, can be connected Centronic-compatible Including mains plug EC241-II hand-held transmitter included Item no Dimensions (W x H x D) Mains connection Degree of protection Loading capacity Type of mounting 155 x 130 x 52 mm 230 V / 50 Hz IP20, indoor installation 360 VA Surface-mounted Beck-O-Tronic 6 Centronic Easily controls sectional and roller doors with Becker door drives with electronic limit switching and absolute value encoder Parameterisable inputs and outputs Separate command inputs for UP, STOP and DOWN 12 V/DC output for light barriers (item no ) 230 V light barrier can be connected (item no ) 2 safety inputs present All conventional types of safety edge can be connected Centronic radio transmitter can be programmed (UP, STOP and DOWN separately and UP/STOP/DOWN as an impulse) TÜV type-tested EC141-II hand-held transmitter included Item no Dimensions (W x H x D) Mains connection Degree of protection Control voltage Control power Weight (without connecting cable) 155 x 130 x 50 mm 230 V / 50 Hz IP54, indoor installation 12 V/DC max. 300 ma Approx. 0.5 kg Ambient temperature range 20 C C Beck-O-Tronic 6 with 40 MHz and 4-channel hand-held transmitter, Mini Item no

129 129 APPENDIX MECHANICAL ELECTRICAL CONTROL UNITS

130 B-Tronic radio control units CentralControl CC51 Central control unit for the organisation, operation and automation of roller shutters, dimming and switching actuators and heaters B-Tronic and

receiver Organisation of receivers, groups and scenarios in rooms Rooms can be individually created and named Formation of scenarios 4.

130 130 B-Tronic radio control units CentralControl CC51 Central control unit for the organisation, operation and automation of roller shutters, dimming and switching actuators and heaters B-Tronic and Centronic drives can be operated External Centronic radio receivers can be operated Single, group and central control Individually programmable time control, including holiday function, for each receiver Organisation of receivers, groups and scenarios in rooms Rooms can be individually created and named Formation of scenarios 4.3" (111 mm) touchscreen Remote operation via smartphone, tablet, PC or notebook Network integration via LAN / WLAN Weather data / weather forecast Web cameras can be integrated Updates possible via the internet Can be used as a stand-alone or wall unit Microphone, loudspeaker, brightness sensor and camera are integrated Web client for internet radio Item no Dimensions (W x H x D) Rated voltage Degree of protection 197 x 156 x 33 mm 15 to 24 V/DC IP20 Class of protection II Permissible ambient temperature 0 to +55 C Radio frequency MHz Flush-mounted power supply unit Item no More information on installation and start-up can be found at

131 Dimensions Functional principle typical wiring diagrams B-Tronic radio drive B-Tronic radio

systems with status display Rooflights External control via internet connection or home network

131 131 Dimensions Functional principle typical wiring diagrams B-Tronic radio drive B-Tronic radio drive Centronic radio drive 156 mm KNX RF dimmer CC51 KNX RF socket switch 196 mm 32 mm Can be complemented with KNX products... Tablet-PC PC Smartphone Amazon Echo CentralControl: the central remote control of the B-Tronic systems with status display Rooflights External control via internet connection or home network Web-Cam Roller shutter CONTROL UNITS Light Smoke detector Windows Awning ELECTRICAL Venetian blinds Heating Alarm system Garage doors Radio Switchable sockets APPENDIX MECHANICAL

132 132 B-Tronic radio control units CentralControl CC31 Central control unit for the organisation, operation and automation of roller shutters, dimming and switching actuators and heaters B-Tronic and Centronic drives can be operated External Centronic radio receivers can be operated Single, group and central control Individually programmable time control, including holiday function, for each receiver Organisation of receivers, groups and scenarios in rooms Rooms can be individually created and named Formation of scenarios Visual display via HDMI or AV on television udio ut via and or. mm ack plug Remote operation via smartphone, tablet, PC or notebook Network integration via LAN / WLAN Weather data / weather forecast External web cameras can be integrated Updates possible via the internet Web client for internet radio Mini wireless keypad with touchpad included Item no Dimensions (W x H x D) Rated voltage Plug-in power supply Degree of protection 116 x 116 x 30 mm V / Hz 0.4 A IP20 Class of protection II Permissible ambient temperature 0 to +40 C Radio frequency MHz / 2.4 GHz EasyControl EC5401B 1-channel hand-held transmitter 3-colour LED for feedback indication of the operated receivers Enables the programming of 2 freely selectable intermediate positions Button for easy changing between manual and automatic mode Can be programmed to recognise up to 30 receivers Single, group or central control unit Compatible with the KNX-RF radio standard Including wall bracket Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type LR03 (AAA) Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz More information on installation and start-up can be found at

133 SD / MMC USB-1 USB-2 USB-3 32 C SD / MM C USB-1 USB- 2 USB Dimensions Functional principle typical wiring diagrams Centronic/B-Tronic radio drive 116 mm B-Tronic radio drive Centronic radio drive KNX RF dimmer 116 mm VC180 CC31 EC5401B EC541-II 30 mm mm 175 mm CONTROL UNITS B-Tronic radio drive B-Tronic radio drive ELECTRICAL 33 mm 19 mm EC5401B APPENDIX MECHANICAL

134 134 B-Tronic radio control units EasyControl EC5415B 15-channel hand-held transmitter Large illuminated display 15 channels 3-colour LED for feedback indication of the operated receivers Enables the programming of 2 freely selectable intermediate positions Button for easy changing between manual and automatic mode Pictogram indication of the receiver type (e. g. roller shutter, light) Button for easy setup and retrieval of up to 4 scenarios Can be programmed to recognise up to 45 receivers Single, group or central control unit Compatible with the KNX-RF radio standard Including wall bracket Item no (white) Item no (black) Colour White / black Rated voltage 3 V/DC Battery type LR03 (AAA) Degree of protection IP20 Permissible ambient temperature 10 to +55 C Radio frequency MHz Room Temperature Control RTC3100B Heating actuator Easy mounting Compatible with the KNX-RF radio standard Button for easy on-site operation Single, group and central control The current values and settings are fed back to the central control unit Open window detection Large, easy-to-read display Can be switched between summer and winter modes Can be linked into scenarios Included adapters enable adaptation to many connections: Heimeier, Junkers, Landys + Gyr, MNG, Honeywell, Braukmann, Danfoss RAV, RA, RAVL, Comap D805, Oventrop series A, AV6, all valves with M30 x 1.5 thread Item no Colour White Rated voltage 3 V/DC Degree of protection IP20 Battery type LR 6 (AA) Permissible ambient temperature 0 to +50 C Radio frequency MHz Fluid temperature max. 100 C Valve stroke max. 4.5 mm More information on installation and start-up can be found at

135 Dimensions Functional principle typical wiring diagrams B-Tronic radio drive B-Tronic radio drive 175 mm KNX dimming actuator KNX switching actuator 33 mm 19 mm

135 135 Dimensions Functional principle typical wiring diagrams B-Tronic radio drive B-Tronic radio drive 175 mm KNX dimming actuator KNX switching actuator 33 mm 19 mm EC5415B 48 mm 65 mm KNX RF dimmer B-Tronic radio drive KNX RF socket switch B-Tronic radio drive Centronic radio drive CONTROL UNITS ELECTRICAL 65 mm APPENDIX MECHANICAL

136 B-Tronic radio control units VarioControl VC3201B Flush-mounted radio transmitter Turns ordinary buttons in your living space into radio operator units Installation in flush-mounted box

4035 000 007 0 Colour Rated voltage Battery type Degree of protection Grey 3 V/DC CR2032 IP20 Permissible ambient temperature 0 to +45 C Radio frequency 868.

136 136 B-Tronic radio control units VarioControl VC3201B Flush-mounted radio transmitter Turns ordinary buttons in your living space into radio operator units Installation in flush-mounted box Compatible with the KNX-RF radio standard Long battery life Operation of switching and roller shutter actuators Item no Colour Rated voltage Battery type Degree of protection Grey 3 V/DC CR2032 IP20 Permissible ambient temperature 0 to +45 C Radio frequency MHz VarioControl VC4200B Flush-mounted radio receiver For connecting roller shutter drives Can also be used as a lighting control unit Integrated staircase lighting function Can also be used for operation of venetian blinds Feedback of position or switching status In roller shutter mode: 2 freely selectable intermediate positions can be programmed In blind mode: 2 exact intermediate positions can be programmed with reversing function Can also be used potential-free Any UP/DOWN button can be connected for drive control, and any single button for light impulse control Integrated memory-time function Item no Rated voltage Switching current Degree of protection V/AC / Hz at cos IP20 Class of protection II Permissible ambient temperature 0 to +55 C Type of mounting Flush-mounted in switch box in mm diameter Radio frequency MHz More information on installation and start-up can be found at

Tr onic VarioCont rol VC4200B 4035 200 032 0 IP 20 5 13 14 25 9 230V/50Hz 9 1 µ 3A 230 V ~ L L Ind.

137 Tr onic VarioCont rol VC4200B IP V/50Hz 9 1 µ 3A 230 V ~ L L Ind. L N N N µ 3A 230 V ~ Tronic VarioCont rol VC4200 B IP N N 13 L L 230V/50Hz Ind. L N 15 µ 3A 230 V ~ Tr onic VarioCont rol VC4200B IP N N 13 L L 230V/50Hz Ind. L N 137 Dimensions Functional principle typical wiring diagrams 46 mm 43 mm VC3201B (dim) KNX RF dimmer B-Tronic radio drive EC5415B B-Tronic radio drive B-Tronic radio drive VC3201B (switch) VC3201B (control) VC3201B (control) VC3201B (control) KNX RF socket switch 13 mm 47 mm 49 mm 28 mm VC4200B Tubular drive VC4200B Tubular drive VC4200B CC51 CONTROL UNITS EC5415B APPENDIX MECHANICAL ELECTRICAL

138 KNX-RF radio receiver Radio adapter plug (Germany) Hager TRC270D Radio switch for connecting devices with a German Schuko plug Status displays on CentralControl Manual ON/OFF button on the device

4035 000 012 0 Rated voltage 230 240 V/AC / 50 60 Hz Switching current 16 A / 250 V/AC1 Degree of protection IP30 Permissible ambient temperature 0 to +45 C Type of mounting Surface-mounted K ush

138 138 KNX-RF radio receiver Radio adapter plug (Germany) Hager TRC270D Radio switch for connecting devices with a German Schuko plug Status displays on CentralControl Manual ON/OFF button on the device Item no Rated voltage V/AC / Hz Switching current 16 A / 250 V/AC1 Degree of protection IP30 Permissible ambient temperature 0 to +45 C Type of mounting Surface-mounted K ush mounted dimmer Paladin rf Flush-mounted wireless dimmer Dims LED, halogen and incandescent bulbs Minimum brightness can be adjusted Overload and short-circuit protection Item no Supply voltage LED bulbs 230 V Halogen bulbs, conventional transformer 230 V LED bulbs, electrical transformer 12 V Incandescent/halogen bulbs 230 V Halogen bulbs, electrical transformer 12 V Degree of protection 230 V/AC 4 to 100 W 200 W 5 x 50 W transformer 1 bulb/ transformer 250 W 250 W IP20 Permissible ambient temperature 0 to +40 C Type of mounting Flush-mounted Paladin rf disc light sensor Transmits the measured lux values from the window Installation on the window Note: The disc light sensor can only be programmed in a B-Tronic drive and not in the CC51. Item no Supply voltage Radio frequency Range 2 x 3 V battery CR MHz Up to 100 m (in the open)

139 139 Paladin rf radio door/ window contact Radio door/window contact for monitoring the open state of doors and windows Item no Supply voltage 3 V/DC Dimensions (H x W x D) 78 x 28 x 23 mm Degree of protection IP20 Permissible ambient temperature 10 to +70 C Type of mounting Surface-mounted APPENDIX MECHANICAL ELECTRICAL CONTROL UNITS

140 KNX-RF accessories IP-Cam D-Link DCS-932L/E Network camera Simple integration into existing networks LAN and WiFi connection possible Incl.

11 b/g/n WLAN Permissible ambient temperature 20 to +70 C Video sensor VGA 1/5" CMOS sensor IP-Cam Instar IN-2905 VS WLAN Network camera Simple integration into existing

5 mm RJ45 connection for supplied LAN cable Wifi 802.

140 140 KNX-RF accessories IP-Cam D-Link DCS-932L/E Network camera Simple integration into existing networks LAN and WiFi connection possible Incl. stand and installation foot Item no Power supply 5 V/DC (external power supply unit) Network connection 10/100 BASE-TX Fast Ethernet WLAN b/g/n WLAN Permissible ambient temperature 20 to +70 C Video sensor VGA 1/5" CMOS sensor IP-Cam Instar IN-2905 VS WLAN Network camera Simple integration into existing networks LAN and WiFi connection possible Item no Power supply Network connection WLAN 5 V / 2 A direct current voltage/plug: inside 1.35 mm, outside 3.5 mm RJ45 connection for supplied LAN cable Wifi b/g Permissible ambient temperature 5 to +55 C Video sensor 1/5" CMOS colour sensor Logitech Z150 speaker Multimedia speaker Space-saving design 5 cm speaker Integrated operator controls Item no Total power Wiring Dimensions (H x W x D) Weight 3 W RMS / 6 W peak 3.5 mm jack plug x 84.5 x 76 mm 583 g

KNX-RF radio transmitter 141 KNX radio wall transmitter, 1 channel, WaveLINE, Busch-Jaeger Network-independent 1-way wall transmitter For switching and dimming For blind and light scene control One

4035 000 030 0 Colour Studio white Rated voltage 3 V Battery CR2032 Permissible ambient temperature 5 to +45 C Radio frequency Dimensions (H x W x D) 868.

141 KNX-RF radio transmitter 141 KNX radio wall transmitter, 1 channel, WaveLINE, Busch-Jaeger Network-independent 1-way wall transmitter For switching and dimming For blind and light scene control One radio channel can be operated or two light scenes retrieved Incl. mounting plate for assembly onto smooth walls or on switch boxes. Manufacturer item no.: Item no Colour Studio white Rated voltage 3 V Battery CR2032 Permissible ambient temperature 5 to +45 C Radio frequency Dimensions (H x W x D) MHz 63 x 63 x 16 mm KNX radio wall transmitter, 2 channel, WaveLINE, Busch-Jaeger 1-way cover frame, Busch-Jaeger Network-independent 2-way wall transmitter For switching and dimming For blind and light scene control Two radio channels can be operated or four light scenes retrieved Incl. mounting plate for assembly onto smooth walls or on switch boxes Manufacturer item no.: Item no Colour Studio white Rated voltage 3 V Battery CR2032 Permissible ambient temperature 5 to +45 C Radio frequency Dimensions (H x W x D) Item no Colour Inner dimensions (H x W x D) MHz 63 x 63 x 16 mm 1-way cover frame future linear series from Busch-Jaeger With small corner radii for cut channel covers Manufacturer item no.: K Studio white 64 x 64 x 11 mm CONTROL UNITS ELECTRICAL APPENDIX MECHANICAL

142 142 KNX-RF radio sensors Paladin rf KNX temperature sensor Radio temperature sensor for cyclical temperature measurement in 0.5 C increments Item no Supply voltage 3 V/DC Dimensions (H x W x D) 78 x 28 x 23 mm Measurement accuracy 200 W +/ 0.3 C Degree of protection IP20 Permissible ambient temperature 10 to +70 C Type of mounting Surface-mounted MSRP EUR/unit incl. VAT Paladin rf KNX presence/motion sensor Radio presence/motion sensor for installation in a suspended ceiling Item no Supply voltage Operating mode Detection area Sensitivity Brightness Degree of protection 3.6 V/DC Motion sensor, presence sensor 360 / Ø 7 m at 2.5 m installation height Adjustable lux IP20 Permissible ambient temperature 0 to +45 C Type of mounting MSRP EUR/unit incl. VAT Flush-mounted Dinuy DM KNX 002 KNX presence/motion sensor Radio presence/motion sensor for installation onto a wall or ceiling Item no Supply voltage Detection area Sensitivity Brightness Degree of protection 3.6 V/DC 180 / Ø 10 m at 2 m installation height Adjustable lux IP20 Permissible ambient temperature 0 to +45 C Type of mounting MSRP EUR/unit incl. VAT Surface-mounted

143 143 APPENDIX MECHANICAL ELECTRICAL CONTROL UNITS

144 144 Design foils for CentralControl CC

145 ELECTRICAL CONTROL UNITS APPENDIX MECHANICAL

146 Design foils for CentralControl CC51 031 032 033 034

146 146 Design foils for CentralControl CC Designs with a customer logo are also feasible. Just get in touch! Item no Please specify the required end digit for the design foil.

147 Adapter frame, Alpine white 147 Merten Octocolor Busch-Jaeger alpha nea 55.5 mm 65 mm 70.5 mm Item no Item no Gira S-Color ira at switch 71 mm Item no mm Item no CONTROL UNITS Berker Arsys Jung Topline and LS 990 ELECTRICAL 56 mm 71 mm 70.5 mm Item no Item no APPENDIX MECHANICAL

148 148 Adapter frame, Alpine white Jung CD 500 Jung A500/Gira Event/System M and switch ranges with x mm central board 67 mm 56 mm Item no Item no

Accessories 149 Surface-mounted housing COMBI 308/W cable junction box Suitable for use with VC420-II and VC4200B Item no. 4030 200 035 0 Colour Dimensions (W x H x D) White 88 x 88 x 50 mm Item no.

149 Accessories 149 Surface-mounted housing COMBI 308/W cable junction box Suitable for use with VC420-II and VC4200B Item no Colour Dimensions (W x H x D) White 88 x 88 x 50 mm Item no Multi cover frame, 2-way Multi cover frame, 3-way Item no Item no Varta battery button cell CR2032 Item no APPENDIX MECHANICAL CONTROL UNITS ELECTRICAL

150 150 Overview of the Centronic range of control units Centronic control units radio solutions EC411 MC415 TC511 EC142-II EC242-II EC541-II EC545-II EC5410-II Catalogue page Applications Roller shutter Interior sun protection 1 Exterior sun protection² Illumination (with VC180-II, 220 or 410-II/420-II) Heating systems Garage door drives Functions Hand-held/wall transmitters / / / / / / / / Surface-mounted Flush-mounted Plug-in Window mounting (suction pad) Display Separate UP/STOP/DOWN buttons 1-channel transmitter 2-channel transmitter (light button) / / 5-channel transmitter 10-channel transmitter Receiver/control unit Sensor (transmitter) Manual/automatic Single control unit Group control unit Central control unit Touch mode for blinds Intermediate position Ventilation position/tilt/fabric stretching Memory function Date/time Auto. summer/winter time Holiday function Astro function Switching times Blocking times 1 Roller, blind 2 awning, blind

151 151 MC441-II TC445-II TC4410-II EC611 VC421 SC431-II SWC241-II SWC245-II SWC441-II SWC442-II SWC445-II SWC745-II / / / / / / / / / / CONTROL UNITS ELECTRICAL APPENDIX MECHANICAL

152 152 Overview of the Centronic range of control units Centronic control units radio solutions Twilight Sun (threshold control) Wind (threshold control) Angle of inclination Winter operation Switch/button can be connected Glass breakage function Solar operation Supported receivers VC180-II VC220 VC220h VC280-II VC320 VC410-II VC420-II VC470-II VC520 UC520 SC211-II SWC510 SC561 SC711 SC811 SC861 Roller shutter drives with Centronic receivers Sun protection drives with Centronic receivers Roller shutter drives with B-Tronic receivers Sun protection drives with B-Tronic receivers Supported drives M04, E01, E03, M05, E15, M17, E02, E16 and E18 models All drives with C-plug BOT5, BOT6, BOM Third party devices with pulse input EC411 MC415 TC511 EC142-II EC242-II EC541-II EC545-II EC5410-II

153 153 MC441-II TC445-II TC4410-II EC611 VC421 SC431-II SWC241-II SWC245-II SWC441-II SWC442-II SWC445-II SWC745-II CONTROL UNITS ELECTRICAL APPENDIX MECHANICAL

154 154 Overview of the Centronic range of control units Centronic control units radio solutions UC520 VC180-II VC220 VC220h VC280-II VC320 VC410-II VC420-II Catalogue page Applications Roller shutter Interior sun protection 1 Exterior sun protection² Illumination (with VC180-II, 220 or 410-II/420-II) Heating systems Garage door drives Functions Hand-held/wall transmitters Surface-mounted Flush-mounted Plug-in Window mounting (suction pad) Display Separate UP/STOP/DOWN buttons 1-channel transmitter 2-channel transmitter (light button) 5-channel transmitter 10-channel transmitter Receiver/control unit Sensor (transmitter) Manual/automatic Single control unit Group control unit Central control unit Touch mode for blinds Intermediate position Ventilation position/tilt/fabric stretching Memory function Date/time Auto. summer/winter time Holiday function Astro function Switching times Blocking times Twilight 1 Roller, blind 2 awning, blind

155 155 VC470-II VC520 SC211-II SWC510 SC561 SC711 SC811 SC911 SC ( ) CONTROL UNITS ELECTRICAL APPENDIX MECHANICAL

156 156 Overview of the Centronic range of control units Centronic control units radio solutions Sun (threshold control) Wind (threshold control) Rain Angle of inclination Winter operation Switch/button can be connected Glass breakage function Solar operation Supported receivers VC180-II VC220 VC220h VC280-II VC320 VC410-II VC420-II VC470-II VC520 UC520 SWC510 Roller shutter drives with Centronic receivers Sun protection drives with Centronic receivers Roller shutter drives with B-Tronic receivers Sun protection drives with B-Tronic receivers Supported drives M04, E01, E03, M05, E15, M17, E02, E16 and E18 models All drives with C-plug BOT5, BOT6, BOM Third party devices with pulse input UC520 VC180-II VC220 VC220h VC280-II VC320 VC410-II VC420-II

157 157 VC470-II VC520 SC211 SWC510 SC561 SC711 SC811 SC911 SC861 CONTROL UNITS APPENDIX MECHANICAL ELECTRICAL

158 158 Overview of the Centronic range of control units wired solutions Centronic control units wired EC41 EC42 EC52 UC42 Catalogue page Applications Roller shutter Exterior sun protection 1 Interior sun protection 2 Functions Surface-mounted Flush-mounted Rail mounting Window mounting (suction pad) Display Separate UP/STOP/DOWN buttons Switch/button combination Sensor Manual/automatic Single control unit Group/central control unit Touch mode for blinds Intermediate position Ventilation position/tilt/fabric stretching Memory function Date/time Auto. summer/winter time Holiday function Astro function Switching times Blocking times Twilight Sun (threshold control) Wind (threshold control) Winter operation Supported receivers SC43 SC71 SC81 UC45 UC52 MC42 TC42 TC52 SC43 SWC62 SC71 SC81 1 Roller, blind 2 awning, blind

159 Overview of the B-Tronic range of control units 159 B-Tronic control units radio solutions EC5401B Catalogue page Applications Roller shutter EC5415B CC31 CC51 RTC3100B VC3201B VC4200B Interior sun protection 1 Exterior sun protection 2 Illumination (with VC4200B) Heating systems Garage door drives (with VC4200B) Functions Hand-held/wall transmitters / / / / / Surface-mounted Flush-mounted Plug-in Window mounting (suction pad) Display Separate UP/STOP/DOWN buttons 1-channel transmitter 2-channel transmitter (light button) 5-channel transmitter 10-channel transmitter 15-channel transmitter Receiver/control unit Sensor (transmitter) Manual/automatic Single control unit Group control unit Central control unit Touch mode for blinds Intermediate position Ventilation position/tilt/fabric stretching Memory function Date/time Auto. summer/winter time Holiday function Astro function 1 Roller, blind 2 awning, blind CONTROL UNITS ELECTRICAL APPENDIX MECHANICAL

160 160 Overview of the B-Tronic range of control units B-Tronic control units radio solutions Switching times Blocking times Twilight Sun (threshold control) Wind (threshold control) Angle of inclination Winter operation Switch/button can be connected Glass breakage function Solar operation Supported receivers VC180-II VC220 VC220h VC280-II VC320 VC410-II VC420-II VC470-II VC520 UC520 SWC510 Roller shutter drives with Centronic receivers Sun protection drives with Centronic receivers Roller shutter drives with B-Tronic receivers Sun protection drives with B-Tronic receivers Supported drives M04, E01, E03, M05, E15, M17, E02, E16 and E18 models BOT5, BOT6, BOM Third party devices with pulse input EC5401B EC5415B CC31 CC51 RTC3100B VC3201B VC4200B

161 161 APPENDIX MECHANICAL ELECTRICAL CONTROL UNITS

162 162 Overview Electrical accessories Rotary switch / push-button 164 Universal key switch / push-button 165 Latch clamp 166 Rotary switch set 166 Cord switch set 167 Cord switch adjustment set 167 Universal programming unit 167 Quick-connection set 168 Adapter cable 168 Hirschmann coupling and plug 168 U26 timer / LS26 light sensor 169 Surface-mounted housing 169 Relay 169 Automatic rain protection set RAS Thermostat 170 Code switch 170 Single push button 170 Hand-held transmitter 171 Light barrier transmitter 172 Radio remote control unit 172 Spiral cable 173 Closing plugs 173 Pressure-wave hose 173 Pressure-wave contact switch 173 Cable terminal box 174 Rubber profile strip 174 Terminal strip 174 Pressure-wave mounting set Pressure-wave mounting set Electrical safety edge 175 OSE rubber profile, roller shutter 175 OSE terminal strip, roller shutter 175 OSE rubber profile, door 176 OSE terminal strip, door 176 OSE mounting set, roller shutter 176 OSE mounting set, door 176 DC control unit Overload protection DSD 177 DC control unit GS2 / 24 V 177 DC control unit GS2 / 12 V 177

163 163 APPENDIX MECHANICAL ELECTRICAL

164 164 Rotary switch / push-button, pole, ush mounted Rotary switch / push-button for controlling a mechanical or multiple electronic drives or control units with push-button inputs 1-pole version Complete with full cover plate Switchable push-button / latched switch Item no Colour Dimensions (L x W x H) Mains connection Degree of protection Loading capacity Type of mounting Alpine white 80 x 80 x 48 mm 230 V / 50 Hz IP20 10 A Flush-mounted Rotary switch / push-button, 1-pole, surface-mounted Rotary switch / push-button for controlling a mechanical or multiple electronic drives or control units with push-button inputs 1-pole version Complete with surface-mounted housing Switchable push-button / latched switch Item no Colour Dimensions (L x W x H) Mains connection Degree of protection Loading capacity Type of mounting Alpine white 57 x 64.5 x 51.5 mm 230 V / 50 Hz IP20 10 A Surface-mounted Rotary switch / push-button, 2-pole, surface-mounted Rotary switch / push-button for controlling two mechanical or multiple electronic drives 2-pole version Complete with frame Switchable push-button / latched switch Item no Colour Dimensions (L x W x H) Mains connection Degree of protection Loading capacity Type of mounting Grey 80 x 75 x 60 mm 230 V / 50 Hz IP44 10 A Surface-mounted

165 165 Rocker switch / rocker pushbutton switch, ush mounted Rocker switch / push-button for controlling a mechanical or multiple electronic drives or control units with push-button inputs Outputs locked 1-pole Complete with frame Item no (rocker switch) Item no (rocker push-button switch) Colour Alpine white Dimensions (L x W x H) 80.5 x 80.5 x 35 mm Mains connection 230 V / 50 Hz Degree of protection IP20 Loading capacity 10 A Type of mounting Flush-mounted Rocket switch / rocker pushbutton switch, surface-mounted Rocker switch / push-button for controlling a mechanical or multiple electronic drives or control units with push-button inputs Outputs locked 1-pole Complete with surface-mounted housing Universal key switch / pushbutton, surface-mounted Item no (rocker switch) Item no (rocker push-button switch) Colour Grey Dimensions (L x W x H) 75 x 75 x 55 mm Mains connection 230 V / 50 Hz Degree of protection IP20, IP44 with rocker push-button switch Loading capacity Type of mounting 10 A Surface-mounted Key switch / push-button with profile semi-cylinder for controlling a mechanical or multiple electronic drives or control units with push-button inputs Latched / dead mans on 1 or 2 sides With profile semi-cylinder Incl. 3 keys Item no (random keys) Item no (common keys) Colour White frame Dimensions (L x W x H) 80 x 80 x 54 mm Mains connection 230 V / 50 Hz Degree of protection IP54 Loading capacity 5 A Type of mounting Surface / flush-mounted ELECTRICAL APPENDIX MECHANICAL

166 Latch clamp, 4-pole Item no. 4816 000 004 0 Latch clamp, 5-pole Item no.

plug-in terminal, 4-pole (releasable) Item no.

166 166 Latch clamp, 4-pole Item no Latch clamp, 5-pole Item no Rotary switch set, surface-mounted Rotary switch set for starting operation of a drive with mechanical limit switching 1-pole 2 m mains cable 3 m connecting cable Incl. plug-in terminal, 4-pole (releasable) Item no Colour Mains connection Degree of protection Loading capacity Type of mounting Grey 230 V / 50 Hz IP44 10 A Surface-mounted Rotary switch set, surface / ush mounted Rotary switch set for starting up a drive with mechanical limit switching 1-pole 1 m mains cable 0.7 m connecting cable Incl. plug-in terminal, 4-pole (releasable) Item no Colour Mains connection Degree of protection Loading capacity Type of mounting Cream white 230 V / 50 Hz IP20 10 A Surface / flush-mounted

167 Cord switch set With latching push-button Item no. 4901 002 182 0 Cord switch adjustment set Cord switch adjustment set for starting operation of drives with electronic limit switching 1-pole 2.

4935 200 013 0 (coupling (type STAK 3)) Colour White Mains connection 230 V / 50 Hz Degree of protection IP20 Universal programming unit For drives with mechanical and electronic limit switching, and

167 167 Cord switch set With latching push-button Item no Cord switch adjustment set Cord switch adjustment set for starting operation of drives with electronic limit switching 1-pole 2.8 m drive connecting cable 2 m mains cable Item no (with plug-in terminal) Item no (coupling (type STAK 3)) Colour White Mains connection 230 V / 50 Hz Degree of protection IP20 Universal programming unit For drives with mechanical and electronic limit switching, and drives with electronic radio limit switching Important functions are retrievable with 1-button operation Integrated mains and motor cables Stronger industrial housing with weld edge protection External signal transducer can be connected Backlit control buttons User-friendly operating logic ELECTRICAL Item no Colour Black Rated voltage V/AC / 50 Hz Loading capacity max. 5A Degree of protection IP 44 Permissible ambient temperature 10 to +50 C Mains connection cable 1.8 m length Drive cable 1.6 m length APPENDIX MECHANICAL

168 Quick-connection set, 4-core or core cross sections. to. mm 2 IP65 Item no.

Cable length: 0.3 / 2 / 5 m Item no. 4930 200 181 0 (0.3 m) Item no. 4930 200 089 0 (2 m) Item no.

168 168 Quick-connection set, 4-core or core cross sections. to. mm 2 IP65 Item no Connecting cable for radio drive C01/B01 2 m 230 V / 50 Hz power line with CEE 7/7 safety plug Plug-in terminal Item no Adapter cable Adapter cable with Hirschmann coupling (type STAK 3) for adjustment set Cable length: 0.3 / 2 / 5 m Item no (0.3 m) Item no (2 m) Item no (5 m) Hirschmann coupling (type STAK 3N) Item no Colour Grey Hirschmann retaining clamp Item no Hirschmann plug (type STAS 3N) Item no Colour Grey

169 U26 timer Easy operation using clear display Maximum convenience through preprogrammed and individually programmable switching times Holiday and weekly function Sun and twilight function in

169 169 U26 timer Easy operation using clear display Maximum convenience through preprogrammed and individually programmable switching times Holiday and weekly function Sun and twilight function in connection with LS26 light sensor Adjustable ventilation slot Power reserve for mains failure Light sensor can be connected Can be integrated into switching ranges from many manufacturers: Berker: S1, B3, B7/Gira: Standard, E2, Event, Esprit/Jung: AS, A500, A-Creation, A-Creation-Glas, A-Plus/Merten: M-Smart, M-Arc, M-Plan, M-Plan- Glas, M1, Attelier, M-Star/Hager: kallysto.pur, kallysto.stil, kallysto.art/ PEHA: Aura/Busch-Jaeger: Balance-SI/ELSO: Joy, as well as additional manufacturers with x mm central board dimensions Item no Colour Mains connection Degree of protection Loading capacity Type of mounting Alpine white 230 V / 50 Hz IP20 5 A lush mounted mm diameter, wall mounting C-disc for Busch- Jäger Item no Surface-mounted housing for U26 timer Item no Colour Dimensions (W x H x D) Alpine white 81 x 81 x 50.5 mm LS26 light sensor Cable length: 2 / 5 m Suitable for U26 timer Item no (LS26 2 m) Item no (LS26 5 m) Isolating relay TR1 For connecting multiple drives with mechanical limit switching in parallel 1 isolating relay is needed for each drive Item no Dimensions (W x H x D) Mains connection Degree of protection Loading capacity 30 x 37 x 30 mm 230 V / 50 Hz IP20 5 A ELECTRICAL Multiple control relay For controlling at most 2 drives with mechanical limit switching or multiple drives with electronic limit switching, and for configuring group and central control units. Item no Dimensions (W x H x D) Mains connection Degree of protection Loading capacity 49 x 52 x 22 mm 230 V / 50 Hz IP20 6 A APPENDIX MECHANICAL

170 Automatic rain protection set RAS10 The automatic rain protection set RAS10 with frost detection from +1 C comprises: Automatic rain protection RA10 Rain sensor RS10 The RAS10 serves to detect

4017 000 014 0 Colour Mains connection Degree of protection Power consumption Type of mounting Cable length White / grey 230 V / 50 Hz IP65 (sensor) 4.5 W Surface-mounted max.

170 170 Automatic rain protection set RAS10 The automatic rain protection set RAS10 with frost detection from +1 C comprises: Automatic rain protection RA10 Rain sensor RS10 The RAS10 serves to detect rain and frost for the protection of awnings, the control of roof ventilation, etc. Item no Colour Mains connection Degree of protection Power consumption Type of mounting Cable length White / grey 230 V / 50 Hz IP65 (sensor) 4.5 W Surface-mounted max. 100 m from control component to sensor Room thermostat RTR Room thermostat RTR for use in connection with sun protection control Floating changeover contact Temperature range: 5 30 C Item no Dimensions (W x H x D) Colour Loading capacity Type of mounting 75 x 75 x 25 mm White 5 A Surface-mounted Single push button, surfacemounted Single push-button for controlling a mechanical or multiple electronic drives or control units with push-button input Complete with surface-mounted housing Item no Colour Mains connection Degree of protection Loading capacity Type of mounting Alpine white 230 V / 50 Hz IP44 10 A Surface-mounted Code switch For operating control units in the door area 2-wire communication between keypad and control unit 3 individually settable codes Floating changeover contact The following is included: 1 evaluator unit in housing 1 keypad with 2-wire access line Item no Colour Mains connection Degree of protection Type of mounting White housing, grey keys 230 / 115 V, 50 / 60 Hz IP54 (keypad) Surface-mounted, with housing for wall mounting

no. 4905 500 001 0 Colour Dimensions (W x H x D) Blue / red 38 x 74 x 15 mm 4-channel hand-held transmitter, Mini The following is included: 4 channel, 40 MHz Mini hand-held transmitter 12 V battery

171 171 2-channel hand-held transmitter, Micro The following is included: 2-channel 433 MHz 3 V battery (CR2032) Item no Colour Dimensions (W x H x D) Blue / red 24 x 50 x 11 mm 1-channel handheld transmitter, Mini The following is included: 1 channel, 40 MHz Mini hand-held transmitter 12 V battery Item no Colour Dimensions (W x H x D) Blue / red 38 x 74 x 15 mm 4-channel hand-held transmitter, Mini The following is included: 4 channel, 40 MHz Mini hand-held transmitter 12 V battery Item no Colour Dimensions (W x H x D) Blue / red 38 x 74 x 15 mm 1-channel hand-held transmitter, Maxi The following is included: 1 channel 40 MHz Maxi hand-held transmitter 9 V battery Item no Colour Dimensions (W x H x D) Blue / red 60 x 110 x 22 mm ELECTRICAL 4-channel hand-held transmitter, Maxi The following is included: 4 channel 40 MHz Maxi hand-held transmitter 9 V battery Item no Colour Dimensions (W x H x D) Blue / red 60 x 110 x 22 mm APPENDIX MECHANICAL

172 Infrared light barrier transmitter and receiver Item no. 4906 000 117 0 Range Control voltage 15 m 24 240 V/AC, 12 240 V/DC e ector light barrier Only for use in buildings.

5 m IP65 24 240 V/AC, 12 240 V/DC Radio remote control unit, 1-channel For retrofitting to an existing door control unit (with no integrated slot for the radio receiver) Complete with receiver and

172 172 Infrared light barrier transmitter and receiver Item no Range Control voltage 15 m V/AC, V/DC e ector light barrier Only for use in buildings. Not suitable for outdoor installation. Item no Range Degree of protection Control voltage max. 5 m IP V/AC, V/DC Radio remote control unit, 1-channel For retrofitting to an existing door control unit (with no integrated slot for the radio receiver) Complete with receiver and antenna In plastic housing With push-button function 30 hand-held transmitter buttons can be saved Item no Dimensions (W x H x D) Degree of protection Loading capacity Type of mounting Possible codes FM Receiver unit Relay output 125 x 125 x 100 mm IP54 5 A floating Surface-mounted 4.78 million Self-training 1 x potential-free, 1 x changeover contact: 5 A / 230 V Radio remote control unit, 4-channel For retrofitting to an existing door control unit (with no integrated slot for the radio receiver) Complete with receiver and antenna In plastic housing With push-button function 30 hand-held transmitter buttons can be saved Item no Dimensions (W x H x D) Degree of protection Loading capacity Type of mounting Possible codes FM Receiver unit Relay output 125 x 125 x 100 mm IP54 5 A floating Surface-mounted 4.78 million Self-training 4 x potential-free, 4 x changeover contact: 5 A / 230 V

173 Spiral cable, 2-core For connecting the cable terminal box to the

7 m, stretches to 3 m Spiral cable, 4-core For connecting the cable

4903 200 134 0 Length 0.9 m, stretches to 3.

4903 000 132 0 Length Diameter 0.42 m 5.

173 173 Spiral cable, 2-core For connecting the cable terminal box to the door and control unit flexibly Item no Length 0.7 m, stretches to 3 m Spiral cable, 4-core For connecting the cable terminal box to the door and control unit flexibly Item no Length 0.9 m, stretches to 3.5 m Closing plugs for pneumatic safety edge Item no Pressure-wave hose For connecting the rubber profile to the pressure-wave contact switch Item no Length Diameter 0.42 m 5.0 mm ELECTRICAL Pressure-wave contact switch (normally closed) For constructing a pneumatic safety edge Including housing for installation on the door Item no APPENDIX MECHANICAL

174 174 Cable terminal box For installing the safety edge Item no ubber profile strip for pressure-wave mounting set Single-chamber system Item no Dimensions (W x H) 20 x 20.5 mm / continuous lengths Terminal strip, galvanised For fastening the rubber profile strip Item no Dimensions (W x H) 22 x 9 mm Pressure-wave mounting set 1 The following is included: 1 pressure-wave contact switch Spiral cable, 2-core, length 0.7 m, extends to 3 m 2 closing plugs 1 pressure-wave hose Item no

175 Pressure-wave mounting set 2 The following is included: 1 pressure-wave contact switch Spiral cable, 4-core, length 0.9 m, extends to 3.5 m 2 closing plugs 1 pressure-wave hose Item no.

175 175 Pressure-wave mounting set 2 The following is included: 1 pressure-wave contact switch Spiral cable, 4-core, length 0.9 m, extends to 3.5 m 2 closing plugs 1 pressure-wave hose Item no Electrical safety edge* Electrical safety edge for securing the closing edge of door installations Continuous lengths of rubber profile prepared with sealing lip and switching strips Continuous lengths of aluminium C-profile rail *When ordering, please quote the length in mm and the connecting side (as seen from the inside) Item no Dimensions (W x H) Dimensions (W x H) Terminating resistance 25 x 12 mm / continuous lengths (rail) 25 x 29 mm / continuous lengths (rubber). k rubber profile, roller shutter OSE terminal strip, roller shutter Continuous lengths of rubber profile strip Item no Dimensions (W x H) 15 x 40 mm Continuous length terminal strip, galvanised Item no Dimensions (W x H) 15 x 8 mm ELECTRICAL APPENDIX MECHANICAL

176 176 rubber profile, door Continuous lengths of rubber profile strip Item no Dimensions (W x H) 25 x 72 mm OSE terminal strip, door Continuous length terminal strip, galvanised Item no Dimensions (W x H) 25 x 12 mm OSE mounting set, roller shutter The following is included: 2 stoppers for rubber profile Spiral cable, 4-core, length 0.9 m, extends to 4 m 1 OSE terminal box 1 OSE transmitter 1 OSE receiver Item no OSE mounting set, door The following is included: 2 stoppers for rubber profile Spiral cable, 5-core, length 0.9 m, extends to 4 m 1 OSE terminal box 1 OSE transmitter 1 OSE receiver Item no

177 177 DC control unit 1 DC control unit with accumulator battery for operating tubular drives with safe extra-low voltage 24 V/DC With 2.2 Ah battery Output voltage: 24 V/DC Push-button input UP / DOWN, individual, central Item no Colour Mains connection Degree of protection Loading capacity Type of mounting Light grey 230 V / 50 Hz IP54 6 A / 24 V In surface-mounted housing Overload protection DSD, adjustable Item no Dimensions (W x H x D) Loading capacity Type of mounting 94 x 94 x 55 mm 2.5 to 6.5 A / 24 V In surface-mounted housing DC control unit GS2 / 24 V DC control unit for operating tubular drives with safe extra-low voltage 24 V/DC Output voltage: 24 V/DC Push-button input UP / DOWN DC control unit GS2 / 12 V Item no Colour Dimensions (W x H x D) Mains connection Degree of protection Loading capacity Type of mounting Light grey 182 x 180 x 90 mm 230 V / 50 Hz IP A / 24 V In surface-mounted housing The GS2 consists of a power supply unit that is connected to the 230 V mains, and which supplies the drive with 12 V/DC power. Output voltage: 12 V/DC Push-button input UP / DOWN ELECTRICAL Item no Colour Dimensions (W x H x D) Mains connection Degree of protection Loading capacity Type of mounting Light grey 182 x 180 x 90 mm 230 V / 50 Hz IP54 9 A / 12 V In surface-mounted housing APPENDIX MECHANICAL

178 178 Overview Mechanical accessories Drive adapters and rings 180 Octagonal shaft 180 Profile shaft 181 Hexagonal shaft 183 Grooved shaft 184 Grooved shaft for mute drives 187 Round tube 187 Drive adapters and rings for sensitive obstacle detection 191 Cover clips 195 Setting tools / suspension springs 196 Rigid shaft connectors 197 Rigid safety springs 197 Rigid quick-release connectors for size 40 shafts 198 Anti-lifting device 200 Wall brackets, box brackets, system brackets and awning brackets 205 Tubular drives P5 P13 and R7 R Tubular drives L44 L Accessories for tubular drives with crank connection 215 R12 L Connecting pieces 217 Accessories for blind drives 218 Screw fastenings 218 Accessory sets 219 Screwless fastening material 220 Shaft couplings D259/D Shaft couplings D Shaft couplings D Button switch accessories 224 Fastening ring 200 Connecting pieces 201 Tubular drives P5 P Tubular drives R7 R Tubular drives L44 L

179 179 APPENDIX MECHANICAL

180 180 Drive adapters and rings Octagonal shaft Drive adapter Ring App.* Manufacturer Selve Designation (Dimensions) Drive adapter S40 Ring S40 P5 P13 R7 R50 L44 L V. Müller Drive adapter S40VM Ring S40VM Drive adapter SW50 Ring SW50 Intermediate ring 50 x ,75 Selve, Weisbender, Staffer, V. Müller Drive adapter S60 Ring S60 Intermediate ring 50 x Selve, Weisbender, Staffer, V. Müller Drive adapter S60L Extended Ring S60L Extended Drive adapter Rolm 60 Ring Rolm 60 Intermediate ring 50 x Selve, SHG, Weisbender, Eckermann Drive adapter SM70 Ring SM *Application

181 181 Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R50 L44 L120 Alulux Drive adapter SM Ring SM Heroal Drive adapter Ring Ø55 Zubehör Drive adapter SW102 with accessories Ring SW Ø55 Zubehör Heroal Drive adapter SW125 with accessories Ring SW rofile shaft Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R50 L44 L120 Zurflüh Feller Drive adapter ZF 45 x Helioscreen Ring ZF 45 x 0.5 Drive adapter 47 x 2 Ring 47 x APPENDIX MECHANICAL

182 182 Drive adapters and rings rofile shaft Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R50 L44 L120 HOCO Drive adapter HOCO Ring HOCO Benthin Drive adapter Benthin Ring Benthin Wall bracket Zurflüh Feller Drive adapter ZF54 Ring ZF54 Intermediate ring 50 x Zurflüh Feller Drive adapter ZF64 x 0.8 Ring ZF64 x 0.8 Intermediate ring 50 x Drive adapter HM65 Ring HM65 Intermediate ring 50 x Hoos, Metalpreß, Weisbender Eckermann, Imbac Drive adapter E65 Ring E65 Intermediate ring 50 x Zurflüh Feller Drive adapter ZF80 x 1.2 Ring ZF80 x 1.2 Intermediate ring 63 x *Application

183 183 Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R50 L44 L120 Alukon Drive adapter A Ø127,3 Ø124, ,5 Ring A Hexagonal shaft Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R50 L44 L120 Butzbach Rieko Drive adapter B60 Ring B Intermediate ring 50 x Butzbach Rieko Drive adapter B75 Ring B Intermediate ring 63 x Butzbach Drive adapter B Butzbach Ring B75 Drive adapter B85 Ring B APPENDIX MECHANICAL

184 184 Drive adapters and rings Grooved shaft Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R50 L44 L120 Drive adapter M40 Drive wheel Universal Ring M40 Crown wheel 43 mm ,2 8, ,4 Drive adapter M50 Drive wheel Universal Ring M50 Crown wheel 60 mm Ring M50 Crown wheel 80 mm Drive adapter 50 x 2 Rolmatic Ring 50 x 2 Rolmatic Drive adapter 57.5 Ring 57.5 Intermediate ring 50 x 1.5 Drive adapter 63N K up to 25 Nm Ring 63N Drive adapter 63N D from 30 Nm Ring 63N *Application

185 4 185 Drive adapter Ring App.* Manufacturer Designation (Dimensions) Drive adapter Forjas 70 Ring Forjas 70 P5 P13 R7 R50 L44 L Drive adapter DW70N Ring DW70N Drive adapter DW74N Ring DW74N Drive adapter DW78R+F Ring DW78R+F Drive adapter DW78N 1.5 mm centre offset Ring DW78N , , Drive adapter DW78N 4 mm centre offset Ring DW78N Drive adapter DW78 x 1 Ring DW78 x APPENDIX MECHANICAL

186 186 Drive adapters and rings Grooved shaft Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R50 L44 L120 Drive adapter Optinut ,5 17 Ring For R series Drive adapter Optinut Ring For L series Drive adapter Optinut 69 x , Ring For R series Drive adapter DW85N Drive adapter from 40 Nm DW85N Ring DW85N Drive adapter DW85N Ring DW85N *Application arrel fits on the thrust ring of the drive or drive adapters and rings specifically for mute drive types, see page

187 187 Grooved shaft for mute drives*** Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R50 L44 L120 Drive adapter DW78N mute Ø 74,4 31,5 Ø Ring DW78R+F Ø 75,5 12,8 Drive adapter DW85N mute Ø 81,9 31, Ring DW85N Round tube Drive adapter Ring App.* Manufacturer Designation (Dimensions) Drive adapter 38 x 1 / 40 x 2 P5 P13 R7 R50 L44 L Without ring** Drive adapter 40 x 1 / 42 x 2 Ring 40 x 1 / 42 x Drive adapter 40 x 1.3 / 40 x 1.5 Ring 40 x 1.3 / 40 x 1.5 Drive adapter 50 x 1.5 Intermediate ring 50 x Without ring** APPENDIX MECHANICAL

188 188 Drive adapters and rings Round tube Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R50 L44 L120 Drive adapter Siral Ø46,3 6, Intermediate ring 50 x Without ring** Warema Drive adapter 50 x 1.5 Thread M Intermediate ring 50 x Without ring** Mottura Drive adapter D Ø42,8 29º 21,9 16,4 Ø42,8 35,5º 16,5 14,5 Ring D Ø49 Ø 56,7 14,5 7 11,5 Ø 60,5 Drive adapter 60 x 1.5 Ring 60 x 1.5 Intermediate ring 50 x Drive adapter 63 x Ø59 11, ,5 Ring 63 x Drive adapter HD Ø49,6 8,5 19,5 17 Ø53 Ø49,8 16,5 8,6 14,5 Ring HD ,3 Intermediate ring 63 x Ø59 11, ,5 *Application arrel fits on the thrust ring of the drive

189 189 Drive adapter Ring App.* Manufacturer Designation (Dimensions) Drive adapter 63 x 1.5 P5 P13 R7 R50 L44 L Without ring** Ø59,4 30 Drive adapter 70 x 1.5 Ring 70 x Drive adapter 70 x 1.5 Ring 70 x Drive adapter 70 x Ø64, ,6 20,6 Ring 70 x Drive adapter 83 x 1.5 / 85 x 2.5 Ring 83 x 1.5 / 85 x Drive adapter 83 x 1.5 / 85 x 2.5 Ring 83 x 1.5 / 85 x 2.5 Drive adapter 98 x 2 Ring 98 x APPENDIX MECHANICAL

190 190 Drive adapters and rings Round tube Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R50 L44 L120 R7 R25 Drive adapter 100 x Ring 100 x Ring 63 x Drive adapter 102 x Ring 102 x Drive adapter 108 x Ø99,5 23, ,6 Ring 108 x Drive adapter 133 x Ø128,8 30 Ø133 Ø Ring 133 x Ring 98 x *Application

191 191 Drive adapters and rings for sensitive obstacle detection Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R40 L44 L120 Drive adapter O-S kt 37,3 41,65 12,7 40 Ring S Ø36, Drive adapter O-40 x 1.3/ 40 x 1.5 Round shaft For P series obstacle detection Ring 40 x 1.3/ 40 x Drive adapter O-S kt SW50, ,8 40 Ring SW50 Intermediate ring 50 x Ø49,8 45,8 90º 40 Drive adapter O-HOCO52 Ring HOCO52 Intermediate ring 50 x Drive adapter O-ZF ,6 6,6 45,8 40 Ring ZF54 Intermediate ring 50 x Drive adapter O-Rolm Ø62 8kt SW56,9 14 Ø61,5 8kt SW , ,8 40 Ring Rolm 60 Intermediate ring 50 x 1.5 Drive adapter O-S60 Ring S60 L Intermediate ring 50 x APPENDIX MECHANICAL

192 192 Drive adapters and rings Drive adapters and rings for sensitive obstacle detection Drive adapter Ring App.* Manufacturer Designation (Dimensions) P5 P13 R7 R40 L44 L120 Drive adapter O-63N 14.5 mm Ø60,5 Ø14,5 45,8 40 Ring 63N Intermediate ring 50 x Drive adapter O-63N 14.0 mm Ø60,5 Ø14 45,8 40 Ring 63N Intermediate ring 50 x Ø60,5 45,8 13,5 40 Drive adapter O-63N 13.5 mm Ring 63N Intermediate ring 50 x Drive adapter O-ZF ,97 45,8 40 Ring ZF64 x 0.8 Intermediate ring 50 x Drive adapter O-HM ,8 40 Ring HM65 Intermediate ring 50 x Drive adapter O-E ,8 40 Ø62,8 14,7 Ø62 12,2 Ring E º Intermediate ring 50 x Drive adapter O-SM ,8 40 Ring SM Intermediate ring 50 x *Application

193 193 Drive adapter Ring App.* 14 45,8 40 Manufacturer Designation (Dimensions) Drive adapter O-DW78 R+F Ring DW78 R+F P5 P13 R7 R40 L44 L Drive adapter O-D85N Ø81, ,5 40 Ring DW85N Drive adapter O-D Ø95,5 45,8 15,5 45,8 Ø100 23,6 20,6 Ring DW Drive adapter Forjas Ø65,5 45,5 13,5 40 Ring Forjas APPENDIX MECHANICAL

194 194 Drive adapters and rings Fasteners for drive adapters Name Application R7 R20 R30 R120 L44 L120 Drive adapter safety catch Tooth lock washer Screw M Screw M6 for drive adapter 102 / 125-octagonal Washer for drive adapter 102 / 125-octagonal

195 Cover clips 195 Cover clip Application Designation Item number Cover clip white for Pico without strip Cover clip black for Pico without strip Cover clip white for Pico with strip Cover clip black for Pico with strip APPENDIX MECHANICAL

196 196 Setting tools / suspension springs Name Application Packaging unit Item number Flexible setting tool Setting tool Mini suspension spring For roller shutter curtain with ini profile, width mm, length mm 100 units Maxi suspension spring For roller shutter curtain with axi profile, width mm, length mm 100 units Shaft clamp S40 For S40 suspension springs For clipping onto the shaft Suspension springs are hooked into the shaft clamp For protecting the drive against friction damage Shaft clamp S50 For S50 suspension springs For clipping onto the shaft Suspension springs are hooked into the shaft clamp For protecting the drive against friction damage

197 Rigid shaft connectors 197 Rigid safety springs Name Application Item number Rigid safety spring 1-link or mm and mm shaft diameters With mounting profile for mm and mm roller shutter laths Roller shutter tubular drives with automatic detection of anti-lifting devices (+-types, e. g. RP+, PR+, C01 etc.) Rigid safety spring 2-link or mm and mm shaft diameters With mounting profile for mm and mm roller shutter laths Roller shutter tubular drives with automatic detection of anti-lifting devices (+-types, e. g. RP+, PR+, C01 etc.) Rigid safety spring 3-link or mm and mm shaft diameters With mounting profile for mm and mm roller shutter laths Roller shutter tubular drives with automatic detection of anti-lifting devices (+-types, e. g. RP+, PR+, C01 etc.) X1 X2 quick-release connector X1 / mm X2 / mm Area of application for 1-link quick-release connectors Area of application for 2-link quick-release connectors Add roller shutter laths APPENDIX MECHANICAL

198 198 Rigid shaft connectors Rigid quick-release connectors for size 40 shafts Name Application Item number Rigid quick-release connector 1-link For sizes 40, 50 and 60 octagonal shafts With mounting profile for mm to mm roller shutter laths Roller shutter tubular drives with automatic detection of anti-lifting devices Rigid quick-release connector 2-link For size 40 octagonal shafts With mounting profile for mm to mm roller shutter laths Roller shutter tubular drives with automatic detection of anti-lifting devices Rigid quick-release connector 2-link For sizes 50 and 60 octagonal shafts With mounting profile for mm to mm roller shutter laths Roller shutter tubular drives with automatic detection of anti-lifting devices

199 199 Name Application Item number Ring for rigid quickrelease connector For size 40 octagonal shafts Ring for rigid quickrelease connector For size 50 octagonal shafts Ring for rigid quickrelease connector For size 60 octagonal shafts X2 X1 / mm Ø40 mm X1 / mm Ø50 mm quick-release connector X X2 / mm X2 / mm X1 / mm Ø60 mm X2 / mm Add roller shutter laths Area of application for 2-link quick-release connectors Add roller shutter laths APPENDIX MECHANICAL

200 200 Rigid shaft connectors Anti-lifting device Name Application Item number 1-link, profile 8 mm 2-link, profile 8 mm 3-link, profile 8 mm 2-link, profile 14 mm 3-link, profile 14 mm 4-link, profile 14 mm fastening rings are needed for each anti lifting device the gap between anti lifting devices should not be greater than cm. Fastening ring Name Application Item number SW 40 P5-E01... P9-E P5-C01... P9-C01 P5/20PR+ P9/16PR+ SW 60 R8-E01... R40-E SW 70 R8-E03... R20-E03 R8-C01... R40-C01 R8/17RP(+) R20/17RP(+)

201 29 mm 21 mm Connecting pieces 201 Tubular drives P5 P13 Name Application Item number Connecting piece-p 4K-10 including screws, with square, 10 mm Drives for roller shutters P5 P13 Drives for sun protection P5 P Connecting piece-p 20-round including screws, with round pin 20 mm diameter Drives for roller shutters P5 P13 Drives for sun protection P5 P ,5 mm 48 mm Mini strip P C-plug M6/48 including screws Drives for roller shutters P5 P13 Drives for sun protection P5 P B-strip P C-plug Drives for roller shutters P5 P Drives for sun protection P5 P13 APPENDIX MECHANICAL

202 202 Connecting pieces Tubular drives R7 R50 Name Application Item number Mounting pin-r 1/10 Square, 10 mm Drives for roller shutters R7 R Drives for sun protection R7 R50 Mounting pin-r 2/10 Square, 10 mm Drives for roller shutters R7 R Drives for sun protection R7 R50 Mounting pin-r 3/20 Round, d = 20 mm Drives for roller shutters R7 R Drives for sun protection R7 R40 Mounting pin-r 4/12 Square, 12 mm Drives for roller shutters R7 R Drives for sun protection R7 R50 Mounting pin-r 4/16-10 Square, 16 x 10 mm Drives for roller shutters R7 R50 Drives for sun protection R7 R Ø 8,5 mm Mounting pin-r 4/16-10 Square, 16 x 10 mm Hole diameter 8.5 mm Drives for roller shutters R7 R50 Drives for sun protection R7 R Mounting pin-r 4/16 Square, 16 mm Drives for roller shutters R7 R Drives for sun protection R7 R50 Note: or wall brackets with mm square receptacle ( )

203 203 Name Application Item number 48 mm 29 mm Mini strip R C-plug Mini strip M6/48 incl. screws Drives for roller shutters R7 R M 6 9 mm 29 mm B strip-r C-plug including screws Drives for roller shutters (one-sided load) R7 R ,5 mm Ø 62 mm Star connecting piece Drives for roller shutters R7 R mm Drives for sun protection R7 R50 10 mm Star adapter set Star adapter incl. spacer plate Drives for roller shutters R7 R ,3 mm 2,8 mm R10 12,5 mm 20,6 mm 29 mm Ø 62 mm 9,3 mm 2,8 mm R10 12,5 mm 20,6 mm 29 mm Ø 62 mm Star adapter Drives for roller shutters up to 30 Nm APPENDIX MECHANICAL

204 204 Connecting pieces Tubular drives R7 R50 Name Application Item number BS adaptation kit for R series ,5 21 3,6 2,4 consisting of: Drive shaft adapter BS to 40 Nm and Drive adapter safety catch BS to 40 Nm Dismantling tool for drive adapters Tubular drives L44 L120 Name Application Item number Mounting pin-l 1/16 Square, 16 mm Drives for roller shutters L44 L120 Drives for sun protection L44 L Mounting pin-l 2/16 Square, 16 mm Drives for roller shutters L44 L120 Drives for sun protection L44 L120 Note: or wall brackets with mm square receptacle ( ) Mounting pin-l 3/25 Round, d = 25 mm Drives for roller shutters L44 L120 Drives for sun protection L44 L B strip-l Drives for roller shutters (one-sided load) L44/14 L80/

205 Wall brackets, box brackets, system brackets and awning brackets 205 Tubular drives P5 P13 and R7 R50 Name Application Item number Box bracket-p/r 4K-10 with square mm for mounting pins 1/10 and 2/10 and connecting piece mm Drives for roller shutters (one-sided load) R7 R Awning bracket-p/r star-10 with star for mounting pins 1/10 and 2/10 and connecting piece with mm diameter Drives for sun protection R7 R Awning bracket-p/r 4K-10 with square mm for mounting pins 1/10 and 2/10 and connecting piece with mm diameter Drives for sun protection R7 R Awning bracket M6 with spigot for mounting pin 3/20 Drives for roller shutters R7 R Drives for sun protection R7 R40 Awning bracket M6 without spigot for mounting pin 3/20 Drives for roller shutters R7 R40 Drives for sun protection R7 R Awning bracket M8 with spigot for mounting pin 3/20 Drives for roller shutters R7 R40 Drives for sun protection R7 R APPENDIX MECHANICAL

206 206 Wall brackets, box brackets, system brackets and awning brackets Tubular drives P5 P13 and R7 R50 Name Application Item number Awning bracket M8 without spigot for mounting pin 3/20 Drives for roller shutters R7 R40 Drives for sun protection R7 R M8 Universal wall bracket P/R 3/20 for mounting pin 3/20 and connecting piece with mm diameter Drives for roller shutters R7 R Box bracket-p/r 3/20 for mounting pin 3/20 and connecting piece with mm diameter Drives for roller shutters R7 R Behind-plaster bracket-p/r 3/20 for mounting pin 3/20 Drives for roller shutters R7 R Conversion bracket- P/R 3/20 for the behindplaster bracket for mounting pin 3/20 Drives for roller shutters R7 R Plate bracket-p/r B80 3/20 Width mm for mounting pin 3/20 Drives for roller shutters R7 R

207 207 Name Application Item number 50 mm 43 mm Complete conversion set-p/r 3/20 for the behindplaster bracket for mounting pin 3/20 Drives for roller shutters R7 R ,5 mm 57 mm Ball bearing conversion set ,8 mm Ø 6,3 81,8 mm Plate bracket-p/r B120 3/20 Width mm for mounting pin 3/20 Drives for roller shutters R7 R Motor bracket-p/r 3/20 for covering cap for mounting pin 3/20 Drives for roller shutters R7 R Wall bracket P/R with catch for Mini strip Drives for roller shutters P5 P13 R7 R Wall bracket-p/r with catch 2 for Mini strip Drives for roller shutters P5 P13 R7 R APPENDIX MECHANICAL

208 208 Wall brackets, box brackets, system brackets and awning brackets Tubular drives P5 P13 and R7 R50 Name Application Item number Ø 4,2 mm Ø 5,2 mm Wall bracket P/R Exte with catch for Mini strip and EXTE head piece Drives for roller shutters P5 P13 R7 R ±0,2 mm mm Wall bracket P/R Gealan with catch for Mini strip and Gealan head piece Drives for roller shutters P5 P13 R7 R mm 107 mm Wall bracket Heroal left Drives for roller shutters P5 P13 R7 R Ø87 mm Ø12,3 mm Wall bracket Heroal right Drives for roller shutters P5 P13 R7 R Ø87 mm Ø12,3 mm Wall bracket P/R Inoutic with catch for Mini strip and Inoutic head piece Drives for roller shutters P5 P13 R7 R mm Wall bracket P/R Kömmerling with catch for Mini strip and Kömmerling head piece Drives for roller shutters P5 P13 R7 R

209 209 Name Application Item number Lakal wall bracket with catch for Mini strip and Lakal head piece Drives for roller shutters P5 P13 R7 R Wall bracket P/R Profine with catch for Mini strip and VariNova head piece Drives for roller shutters P5 P13 R7 R Ø 4 mm 70 mm Wall bracket P/R SKS with catch for Mini strip and SKS head piece Drives for roller shutters P5 P13 R7 R mm 83 mm 95 mm Wall bracket P/R Veka with catch for Mini strip and VEKA head piece Drives for roller shutters P5 P13 R7 R Wall bracket P/R Vekavariant with catch for Mini strip and VEKAVARIANT head piece Drives for roller shutters P5 P13 R7 R Ø 4,5 45 Wall bracket with catch for Mini strip and ZF head piece Drives for roller shutters P5 P13 R7 R APPENDIX MECHANICAL

210 Ø Wall brackets, box brackets, system brackets and awning brackets Tubular drives P5 P13 and R7 R50 Name Application Item number Wall bracket with catch for Mini strip and ALUKON head piece Drives for roller shutters P5 P13 R7 R ±0,1 mm 29 mm Wall bracket with ZF catch Drives for roller shutters up to 20 Nm Ø3,2 mm Ø4,5 mm Ø12,3 mm Ø10,47 mm 89,4 mm 29 mm Wall bracket with 2 ZF catch Drives for roller shutters up to 20 Nm Ø4,5 mm Ø12,3 mm Ø10,47 mm New build bracket- P/R with catch for Mini strip Drives for roller shutters R7 R Plate bracket-r 85 x 85 for B strip Drives for roller shutters R7 R

211 Ø88 mm 211 Name Application Item number Plate bracket-r for B strip Drives for roller shutters R7 R Box bracket P/R 3/20 offset for mounting pin 3/20 Drives for roller shutters R7 R Wall bracket-p/r with catch including plate Drives for roller shutters R7 R Universal front-mounting clamp bracket for covering cap sizes Drives for roller shutters R7 R mm 165 mm Universal front-mounting clamp bracket for covering cap sizes APPENDIX MECHANICAL

212 212 Wall brackets, box brackets, system brackets and awning brackets Tubular drives L44 L120 Name Application Item number Box bracket-l star-16 with star for mounting pins 1/16, 2/16 and 4/16 Drives for roller shutters R12 L Drive bracket-l star-16 with star for mounting pins 1/16, 2/16 and 4/16 Drives for roller shutters R12 L Awning bracket-l star-16 M6 with star and M6 for mounting pins 1/16, 2/16 and 4/16 Drives for sun protection L44 L Awning bracket-l star-16 M8 with star and M8 for mounting pins 1/16, 2/16 and 4/16 Drives for sun protection L44 L Universal wall bracket L 3/25 for mounting pin 3/25 Drives for roller shutters L44/14 L60/

213 213 Name Application Item number Plate bracket L B120 3/25 for mounting pin 3/25 Drives for roller shutters L44 L Combination bracket-l 3/25 for mounting pin 3/25 Drives for roller shutters L44 L Drive bracket-l cover 3/25 for covering caps for mounting pin 3/25 Drives for roller shutters L44 L Plate bracket L for B strip Drives for roller shutters L44 L Awning bracket M6 with spigot for mounting pin 3/25 Drives for sun protection L44 L80 Drives for conservatory shades (alternating load) L44 L APPENDIX MECHANICAL

214 214 Wall brackets, box brackets, system brackets and awning brackets Tubular drives L44 L120 Name Application Item number Awning bracket M6 without spigot for mounting pin 3/25 Drives for sun protection L44 L80 Drives for conservatory shades (alternating load) L44 L Awning bracket M8 with spigot for mounting pin 3/25 Drives for sun protection L44 L80 Drives for conservatory shades (alternating load) L44 L Awning bracket M8 without spigot for mounting pin 3/25 Drives for sun protection L44 L80 Drives for conservatory shades (alternating load) L44 L

215 Accessories for tubular drives with crank connection 215 R12 L120 Name Application Item number Eye with hexagonal rod SW 7 mm 70-HK 250-HK 450-HK Pivoting bearing with hexagonal rod W mm connecting peg for crank diameter mm Jointed crank Clamp for jointed crank Note: Permanently mounted crank Note: Accessories for permanently mounted cranks mm Pivoting bearing with hexagonal rod W mm connecting peg for crank diameter mm Eye with hexagonal rod 450-k-HK can be shortened, SW 7 mm Extension rod 330-HK Hexagonal SW 7 mm Connecting sleeve HK with internal hexagon, SW 7 mm APPENDIX MECHANICAL

216 216 Accessories for tubular drives with crank connection R12 L120 Name Application Item number Pivoting bearing 90-Ö 90, with hexagonal rod SW 7 mm connecting eye Note: Accessories for removable cranks only Adapter plate HK with pins up to m Adapter flange HK up to 120 Nm Jointed crank, long Note: Removable crank Jointed crank, short Note: Removable crank Awning crank Note: Removable crank

217 217 Connecting pieces Name Application Item number Connecting piece HK 16 square with 16 mm square Drives for roller shutters R12 L120 (note the restrictions for wall brackets) Drives for awnings R12 L120 (note the restrictions for awning brackets) Connecting piece HK 3/25 with mounting pin 3/25 Drives for roller shutters R12 L120 (note the restrictions for wall brackets) Drives for awnings (one-sided load) R12 L80 (note the restrictions for awning brackets) Awning bracket HK M6 with fixing screws Drives for sun protection L44 L Adapter plate HK for covering caps with fastening screws Drives for roller shutters and roller doors L44 L APPENDIX MECHANICAL

218 218 Accessories for tubular drives with crank connection Connecting pieces Name Application Item number Plate bracket HK with adapter plate and fastening screws Drives for roller shutters and roller doors L44 L Release lock HK Removable cylinder Drives for roller shutters and roller doors R12-R50 L44-L Anti-unrolling device TA-0-RD, square, mm max. operating torque: 145 Nm, max. operating speed: 22 m, max. arresting torque: 365 Nm Accessories for blind drives Screw fastenings Note: 4 screw fastenings, each consisting of 1 screw and spacing bush, are required to fasten one blind drive. Motor type System Application Screw Spacing bush D259/D359 HD (luxaflex), Turnils (Perma) D239/D339/D539/D839 HD (luxaflex), Turnils (Perma) D239/D339/D539/D839 Faber

219 219 Accessory sets Universal accessory set Item number For D259/D For D For D Accessory sets consisting of Dunker SNR Designation Number of units Item number Accessory set D259/D Coupling cpl. D259, 4Kt Coupling cpl. D259, Ø14 square drive adapter Coupling cpl. D259, Ø14 round drive adapter Coupling cpl. D259, 4Kt Mounting profile Clamping spring D, 55 profile witch off button cpl.. mm long Accessory set D For use with planetary carrier 4Kt For use with planetary carrier 6Kt For use with planetary carrier 6Kt For use with planetary carrier 6Kt witch off button cpl.. mm long Coupling D4, D Countersunk screw M5 x 15.5 Sonder Bushing 7 x 14 x 8 Perbunan Bolt 6Kt7 for coupling Threaded pin ISO4029 M4 x 5 45H Accessory set D Coupling 6Kt7/4Kt Coupling D7, processed Coupling 6Kt7 Schenker Coupling Rd12 D3 D7 Hueppe Plug coupling pole/D plug P Coupling 6Kt7-4Kt Coupling 6Kt7/6Kt Coupling 6Kt7-6Kt Threaded pin ISO4029 M4 x 5 45H APPENDIX MECHANICAL

220 220 Accessories for blind drives Screwless fastening material Note: mounting brackets and mounting profiles are needed to fasten one blind drive. Name Application Item number Mounting profile for HD head rail For drive D259/D359 For HD head rail Mounting profile in the head rail For drive D259/D359 For blind drive in the head rail Mounting profile wide in the head rail For drive D539/D839 For blind drive in the head rail Mounting profile for Schenker head rail For drive D259/D359 For Schenker head rail external Internal mounting bracket in the head rail For drive D259/D359 Clamping spring for fastening inside the head rail Mounting bracket, external, narrow, 55 profile For drive D259/D359 Clamping spring for fastening on the outside of the head rail Mounting bracket, external, wide For drive D539/D839 Clamping spring for fastening on the outside of the head rail

221 221 Shaft couplings D259/D359 Note: M4 x 5 DIN916 threaded pins are used to fasten the shaft coupling to the barrel. 2 shaft couplings are needed for each application with central motors. With end motors 1 is used. Name Application Item number Shaft coupling Shaft form square, 12 mm For drive D259/D359 Connection from the drive to the barrel of the blind Used for shaft coupling Usage, square 12 mm to square 7 mm For drive D259/D359 Connection from the drive to the barrel of the blind Shaft coupling Shaft form square, 10 mm For drive D259/D359 Connection from the drive to the barrel of the blind Shaft coupling Shaft form grooved tube 14 mm, square groove For drive D259/D359 Connection from the drive to the barrel of the blind Shaft coupling Shaft form grooved tube 14 mm, round groove For drive D259/D359 Connection from the drive to the barrel of the blind APPENDIX MECHANICAL

222 222 Accessories for blind drives Shaft couplings D839 Note: M4 x 5 DIN916 threaded pins are used to fasten the shaft coupling to the barrel. 2 shaft couplings are needed for each application with central motors. With end motors 1 is used. Name Application Item number Shaft coupling Shaft form square, 12 mm For drive D839 Connection from the drive to the barrel of the blind Shaft coupling Shaft form grooved tube 14 mm, round groove For drive D839 Connection from the drive to the barrel of the blind Shaft coupling Shaft form grooved tube 14 mm, square groove For drive D839 Connection from the drive to the barrel of the blind Threaded pin ISO4029 M4 x 5 45H For drive D Shaft coupling Shaft form 6kt7 4kt7 For drive D839 Connection from the drive to the barrel of the blind Shaft coupling Shaft form 6kt7/6kt8 For drive D839 Connection from the drive to the barrel of the blind Shaft coupling Shaft form 6kt7 6kt11 For drive D839 Connection from the drive to the barrel of the blind Threaded pin ISO4029 M4 x 5 45H For drive D

223 223 Shaft couplings D539 Note: M4 x 5 DIN916 threaded pins are used to fasten the shaft coupling to the barrel. 2 shaft couplings are needed for each application with central motors. With end motors 1 is used. Name Application Item number Shaft coupling Shaft form square, 12 mm For drive D539 Connection from the drive to the barrel of the blind Shaft coupling Shaft form square, 10 mm For drive D539 Connection from the drive to the barrel of the blind Shaft coupling Shaft form grooved tube 14 mm, square groove For drive D539 Connection from the drive to the barrel of the blind Shaft coupling Shaft form grooved tube 14 mm, round groove For drive D539 Connection from the drive to the barrel of the blind Threaded pin ISO4029 M4 x 5 45H For drive D Usage For drive D539 square, 7 mm Connection from the drive hexagonal, 6 mm to the barrel of the blind hexagonal, 7 mm hexagonal, 8 mm Used with square 8 mm bolts (Hüppe Form) For drive D539 Connection from the drive to the barrel of the blind APPENDIX MECHANICAL

224 224 Accessories for blind drives Button switch accessories Name Application Item number Switch-off button switch complete standard For drives of the Dx39 and Dx59 series Switch-off button switch complete 10 mm extension For drives of the Dx39 and Dx59 series Switch-off button switch complete 20 mm extension For drives of the Dx39 and Dx59 series Control button for Z-laths For drives of the Dx39 and Dx59 series

225 225 APPENDIX MECHANICAL

226 226 Overview Appendix Bracket selection list 227 Drilling templates 228 Order form 229 Notes 234 Terms and conditions 236 Training 239

227 Bracket selection list 227 for various lintel boxes, attachment elements or top elements for mechanical, electronic or remote drives 1. New construction area, predominantly for lintel boxes 3. Attachment element: Mounting directly on the window Required is a: Universal wall bracket Item no Page 206 in the catalogue (Mechanical Accessories) with mounting pin 3 Item no Page 202 in the catalogue (Mechanical Accessories) Required is a: Wall bracket with catch for mm or mm tubular drives Item no Page 207 in the catalogue (Mechanical Accessories) in conjunction with Mini strip P Item no Page 201 in the catalogue (Mechanical Accessories) 2. Attachment element: Mounting on the facade Required is a: Universal front mounting clamp bracket Item no Page 211 in the catalogue (Mechanical Accessories) or larger Universal front mounting clamp bracket Item no Page 211 in the catalogue (Mechanical Accessories) or Wall bracket with catch in combination with Mini strip for mm or mm tubular drives Item no Page 207 in the catalogue (Mechanical Accessories) in conjunction with Mini strip P Item no Page 201 in the catalogue (Mechanical Accessories) with Mini strip R Item no Page 203 in the catalogue (Mechanical Accessories) with mounting pin 3 Item no Page 202 in the catalogue (Mechanical Accessories) with mounting pin on the right Item no with Mini strip R Item no Page 203 in the catalogue (Mechanical Accessories) or a system bracket for the manufacturers: Exte, Gealan, Inoutic, Kömmerling, Profine, SKS, Thyssen and Veka Page 205 in the catalogue (Mechanical Accessories) For higher torques of up to 30 Nm and 40 Nm, the B-strip is required Item no Page 203 in the catalogue (Mechanical Accessories) with plate bracket Item no Page 211 in the catalogue (Mechanical Accessories). etrofit for old constructions or existing behind-plaster bracket Required is a: Conversion bracket 1 Item no Page 206 in the catalogue (Mechanical Accessories) or Conversion bracket 2 Item no Page 207 in the catalogue (Mechanical Accessories) Page 207 in the catalogue (Mechanical Accessories) APPENDIX

228 228 Drilling template D259/D359 Top face Bottom face (button face)

229 Order form 229 Delivery address Customer no. Company Street address Town/Postcode Customer Order no./consignment Company Street address Town/Postcode Preferred delivery date (ex Becker works) Dispatch via: Parcel service Forw. agent Forw. agent guaranteed del. by am/pm Post COD TNT by am/pm Page Designation Item number Quantity Price/unit Comments Becker order no. Processing comment

230 230 Drilling template D139/D439/D539 Top face Opening for setting the limit position Bottom face (button face)

231 Order form 231 Delivery address Customer no. Company Street address Town/Postcode Customer Order no./consignment Company Street address Town/Postcode Preferred delivery date (ex Becker works) Dispatch via: Parcel service Forw. agent Forw. agent guaranteed del. by am/pm Post COD TNT by am/pm Page Designation Item number Quantity Price/unit Comments Becker order no. Processing comment

232 232 Drilling template D739/D839 Top face Bottom face (button face)

233 Order form 233 Delivery address Customer no. Company Street address Town/Postcode Customer Order no./consignment Company Street address Town/Postcode Preferred delivery date (ex Becker works) Dispatch via: Parcel service Forw. agent Forw. agent guaranteed del. by am/pm Post COD TNT by am/pm Page Designation Item number Quantity Price/unit Comments Becker order no. Processing comment

234 234 Notes Together it's easier.

235 Notes 235 Together it's easier.

236 236 General conditions of sale General conditions of sale of BECKER-Antriebe GmbH, Sinn, Germany 1 Validity of the terms and conditions All contractual relations between BECKER-Antriebe GmbH (hereinafter referred to as the Manufacturer), as the seller, and its customers (hereinafter referred to as the urchaser, as the buyers, shall from uly be subject exclusively to the following General Conditions of Sale (AVB). Under the above premise, these shall also apply to all future business relations, even if they are not expressly agreed again. When the Purchaser orders goods based on the Manufacturer s quotation, these terms and conditions shall be considered to be accepted. Any counterprovisions of the Purchaser with reference to their General or Purchasing Terms and Conditions are hereby negated. Such provisions shall only apply if the Manufacturer has expressly agreed to them in advance. All agreements which are reached between the Manufacturer and the Purchaser and which the Manufacturer is obliged to adhere to for the purpose of implementing the Contract must be put in writing in order to take effect. 2 Offer and placing of orders ffers from the anufacturer that are not expressly defined in writing as binding are not legally binding. Orders placed by the Purchaser are legally binding contractual offers. ocuments that form part of the offer, such as catalogues, figures, drawings, specifications of weights and dimensions, are only approximate unless expressly designated as binding or the contractual usability and functionality of the purchased items is compromised by subsequent deviations. The Manufacturer retains proprietary rights and copyrights to all cost proposals, drawings, samples and other documents. These must not be made accessible to third parties. The Manufacturer is obliged to only give third parties access to plans designated by the Purchaser as confidential with the urchaser s consent. 3 Prices s long as nothing in the order confirmation is stated to the contrary, prices are ex works including loading, but excluding packaging, freight, carriage and insurance. Statutory VAT is not included in the prices. This is stated separately on the invoice at the statutory rate on the date of delivery or service. Additional deliveries or services are invoiced separately. The Manufacturer will only arrange insurance against transport damage at the express request of the Purchaser, and on their account. 4 Time of delivery and service Agreements on dates or deadlines for a delivery of service are not binding unless put in writing. If all or part of the delivery or service is delayed due to circumstances beyond the control of the Manufacturer, including force ma eure, tra c disruption, strikes, fire, water damage, power cuts, operational disruptions, administrative measures, lock-outs, lack of materials or other unavoidable events, the Manufacturer is entitled to extend the delivery period by the length of the disruption plus an appropriate lead time, or to withdraw from the contract completely or partially in consequence of the part of the contract not yet fulfilled. f the disruption continues for more than three months, the Purchaser is entitled, after setting a reasonable grace period, to withdraw from the contract with regard to the part of the contract that has not yet been fulfilled. f the delivery period is extended or the Manufacturer is freed from their obligation, the Purchaser has no claims to compensation arising from this. ulfilment of supply and service obligations on the part of the Manufacturer is subject to the Purchaser s obligations being fulfilled on time and correctly. f the urchaser delays acceptance, the Manufacturer is entitled to demand compensation for the loss they have incurred as a result on commencement of the delay in acceptance, the risk of accidental deterioration and accidental loss passes to the Purchaser. 5 Order cancellation, framework agreements rder cancellations by the urchaser for customer specific products or for products commissioned exclusively by the Purchaser will not be accepted. Cancellations for other products require the Manufacturer s express approval. Unless a term has been agreed, framework agreements have a maximum term of 12 months. If the Supplier fails to plan call-ups, the Manufacturer is entitled to organise them itself. Should the average agreed purchase volume not meet the expected demand, the Manufacturer is entitled to supply partial quantities at any time at its own discretion. Unless otherwise agreed, the Manufacturer is entitled at the end of the contractual term to deliver all the residual quantities or to bill the Purchaser for materials, any additional costs incurred and any lost profit. 6 Part deliveries The Manufacturer is at all times entitled to make part deliveries or deliver partial services. 7 Returns Goods that have been ordered and supplied correctly and in perfect condition by the Manufacturer cannot be returned. In exceptional circumstances and with prior written approval from the Manufacturer, goods may be returned. With one off returns, the anufacturer shall apply a fixed processing fee of at least 20 plus statutory VAT. Costs for larger returns will be calculated based on the expenditure. This does not apply to items returned on account of ustified complaints. Acceptance of the items can be denied if they are returned without a return note from the Manufacturer. Costs incurred as a result shall be borne by the Purchaser. The Manufacturer will not accept the return of custom-made or cut-to-size items. 8 Third-party industrial property rights If the Manufacturer is obliged to deliver a product to the Purchaser s specifications drawings, models, patterns, sketches, etc., the urchaser must ensure that no third-party industrial property rights are infringed as a result. In the event that third-party industrial property rights are infringed, the Purchaser, irrespective of whether or not they are at fault, is obliged to exempt the Manufacturer from any third-party claims and pay compensation to the Manufacturer. la e o l lme t a i o ri he place of fulfilment for the anufacturer s services is the anufacturer s registered o ce. nless the order confirmation states to the contrary, upon delivery of the item the risk of accidental loss or accidental deterioration passes to the Purchaser, who is responsible for any expenses associated with the item after delivery. In the event that the delivery item is shipped somewhere other than the place of fulfilment, the risk of loss of or damage to the delivery item passes to the Purchaser when the item is delivered to the shipping company, the carrier or any other person or agency tasked with shipping. 10 Warranty/Guarantee For warranty claims in the event of material defects in roller shutter, sun protection and door drives as well as their control unit components, the following applies: 1. General 1.1 These warranty and guarantee provisions apply to products used in roller shutter, sun protection and door systems. 1.2 The Manufacturer guarantees to remedy any defects in new products for a period of 2 years in accordance with the provisions of law unless agreed otherwise in these General Conditions of Sale. For used products, the warranty period is 1 year. 1.3 The warranty commences upon delivery of the products to the Purchaser. If the Purchaser is unable to prove the precise delivery date, the date of manufacture of the delivery item plus a three-month period of grace is applicable. 1.4 The requirement for warranty is the prior performance of an inspection of the rejected product at the Manufacturer s premises, during which a defect has been determined that the Manufacturer is responsible for. The Purchaser is obliged to make the disputed product available to the Manufacturer, as well as all the information and verifiable documents that are required in order to establish that there is a defect. 1.5 There are no grounds for a warranty claim if it becomes evident in the course of inspection in accordance with Item 1.4 that the complaint is based on improper handling of the delivery item or that, for other reasons, the problem is not the responsibility of the Manufacturer. In this event, the Purchaser is obliged to reimburse the Manufacturer for the expenses and costs incurred by inspecting the item in accordance with Item In the event of a warranty claim, the Manufacturer is entitled to initially attempt to rectify the issue. The Manufacturer hereby reserves the right to decide whether to carry out a repair, or supply a replacement or new unit.. f rectification of the issue is ultimately unsuccessful, a deadline is set following which the Purchaser retains their rights from 437 Clauses 2. and 3. of the BGB (German Civil Code). The deadline must be set in writing it must be of an appropriate length and no less than 14 working days. If the Purchaser has the legal right to withdraw from the contract, the obligation to compensate in accordance with 346 Para. 3 Clause 3 of the BGB (German Civil Code) only fails to apply if the Purchaser has observed the due diligence of a prudent businessman. 1.8 The manufacturer shall reimburse the contractor for the installation and expansion costs in case of a defective delivery according to 439 Para. 3 of the BGB (German Civil Code), as soon as culpable conduct on the part of the manufacturer can be proven. No-fault reimbursement is excluded.

237 The law of the Federal Republic of Germany alone shall be applicable to warranty claims to the exclusion of UN purchase law By purchasing products from the Manufacturer, the Purchaser acknowledges the valid form of the Manufacturer s warranty and guarantee provisions as set out in these General Conditions of Sale. 2. Guarantee for roller shutter and sun protection drives 2.1 Irrespective of the warranty rights described in Item 1, the Manufacturer provides a five year guarantee on roller shutter and sun protection drives, with the effect that drives purchased as new items from the Becker catalogue will be replaced free of charge for a period of up to 5 years from the date of manufacture. The provisions in 9 Clauses , 1.9 and 1.10 apply here accordingly. t is the anufacturer s responsibility to decide whether to effect a repair, or supply an equivalent replacement unit or new unit, and the decision is based on economic considerations. The Manufacturer shall not be liable for any additional costs. 2.2 Should the Purchaser invoke the rights in a guarantee, it is their responsibility to prove that the circumstances warrant their claim. 2.3 This provision does not apply to devices that are not used in roller shutter or sun protection applications in the conventional sense, including fire protection systems, swimming pool systems, sports or similar facilities and used equipment. 3. Obligation to inspect and give notice of defects The Purchaser is subject to a legal obligation to inspect and give notice of defects in accordance with 377 of the German Commercial Code (HGB) in respect of all deliveries and services from the Manufacturer. When a works contract is signed, 377 of the German Commercial Code (HGB) applies by analogy. After the service has been delivered or the risk transferred, the Purchaser must immediately check that the consignment is complete and determine any obvious defects within days at the latest, clearly notified in writing to the Manufacturer. Once this 10-day period has elapsed, it is assumed that the consignment was complete and the goods free of defects at the time of transfer of risk. 11 Limitation of liability Irrespective of their legal basis, claims for compensation against the Manufacturer, their employees or vicarious agents are excluded provided there is no case of wilful misconduct or gross negligence. In the event of wilful misconduct or gross negligence, the Manufacturer s liability is limited to foreseeable damages typical for the type of contract. In the event of an ordinary breach of key contractual obligations due to actions or negligence by non-executive employees, the Manufacturer s liability is limited to the reasonable foreseeable damage typical for the type of contract. In all cases, the Manufacturer s liability for damage to life, body and health, their liability under the German Product Liability Act and other claims arising from manufacturer s liability remain unaffected. The provisions in 9 are also applicable to Purchaser claims for compensation associated with control unit components, door, roller shutter and sun protection drives as well as all equipment that is not used in roller shutter or sun protection systems in the conventional sense, including fire protection systems, swimming pool systems, sports or similar facilities. 12 Liability for defects when processing sent in parts With any kind of processing of sent in or supplied material, the Manufacturer shall not be liable for any defects that arise due to the properties or deficiencies of the material per se. f parts which have been sent in become unusable during processing or assembly due to material faults or other deficiencies, the anufacturer must be compensated for the processing costs incurred or for any other resulting damages. 13 Reservation of proprietary rights Until full settlement of all claims (including all current account balance claims) against the Purchaser which the Manufacturer is entitled to now or in the future regardless of their legal basis, the Manufacturer is granted the following securities that they can release on demand and at will where their value exceeds the claims consistently by more than 10 %. The goods remain the property of the Manufacturer. Processing or reforming are always carried out on behalf of the Manufacturer as manufacturer, but without any obligation on their part. If the (co)ownership of the Manufacturer expires as a result of merger, it is now hereby agreed that the Purchaser s (co)ownership of the uniform item will be transferred to the Manufacturer in proportion to its value (invoice amount). The Purchaser shall keep the Manufacturer s (co-owned) property safe free of charge. Goods to which the Manufacturer has claim to (co)ownership shall be referred to as reserved goods hereinafter. The Purchaser is entitled to process and sell the reserved goods in normal business operations as long as they are not in arrears. Pledging or collateral assignments are inadmissible. The Purchaser now, for the sake of safety, relinquishes any claims (including all current account balance claims) relating to the reserved goods arising from the resale or any other legal reason (insurance, unauthorised action) in their entirety to the Manufacturer. The Manufacturer revocably authorises the Purchaser to collect on claims relinquished to them on their own behalf. This authorisation to collect can only be revoked if the Purchaser fails to honour their payment obligations properly. Where third parties access reserved goods, especially attachments, the Purchaser shall refer to the ownership of the Manufacturer and immediately inform the Manufacturer to enable them to assert their proprietary rights. Where the third party is unable to reimburse the Manufacturer for judicial or extra-judicial costs that arise in this context, the Purchaser shall be liable for said costs. In the event of breach of contract by the Purchaser in particular late payment the Manufacturer shall be entitled to demand the surrender of the reserved goods or, where applicable, demand that the Purchaser s surrender claims against third parties are relinquished. Recovery or pledging of reserved goods by the Manufacturer does not represent a withdrawal from the contract. 14 Payment Invoices from the Manufacturer are payable in full within 30 days of the invoice date unless any agreement to the contrary is in place. Where payment is made within 10 days of the invoice date, the Manufacturer will grant the Purchaser a discount of 2 %. In the event of overseas delivery, the Manufacturer is entitled to require the Purchaser to transfer an open-ended directly-enforceable security from a German bank to the order value of the goods for the purpose of providing collateral against payment claims. In the event of part deliveries or partial provision of services, the Manufacturer is entitled to invoice for services that have already been provided. If the Purchaser fails to meet their payment obligations for part deliveries or partial services provided on time, the Manufacturer is entitled to withhold further partial deliveries or services, or to deliver them exclusively on a cash-on-delivery basis at the Purchaser s expense. Where the Manufacturer has reasonable doubts concerning the Purchaser s financial reliability, or where the latter has fallen into payment arrears for an earlier delivery or partial delivery, the Manufacturer is entitled to carry out future deliveries or partial deliveries exclusively on a cash-on-delivery basis at the urchaser s expense. ny retention of payments or offsetting against payment claims from the Manufacturer is inadmissible unless there are legally binding, uncontested or acknowledged counterclaims involved. Should the Purchaser fall into payment arrears, the Manufacturer shall be entitled to demand 10 % above the basic interest rate of the European Central Bank as compensation from the time the payment was due. The interest rate applied shall be lower if the Purchaser proves a smaller loss. The Manufacturer is permitted to prove more serious damages. 15 Applicable law, place of jurisdiction, partial invalidity These General Conditions of Sale and all legal relations between the Manufacturer and the Purchaser shall be governed by the law of the Federal Republic of Germany. The provisions of the UN sales law are not applicable. f the urchaser is a merchant as defined by the erman ommercial Code (HGB), a legal entity under public law or special funds under public law, the registered o ce of the anufacturer shall be the exclusive place of jurisdiction for all disputes arising directly or indirectly from the contractual relationship. The same applies where the Purchaser has no place of general jurisdiction in Germany or if their domicile or habitual residence are not known at the time of filing legal action. hould one of the provisions in these General Conditions of Sale or one of the provisions within the scope of other agreements be or become invalid, the validity of any other provisions or agreements shall not be affected thereby. he fully or partially ineffective provision should in this case be replaced with an effective provision whose economic purpose comes as close as possible to that of the ineffective provision. Issue date: 01/01/2018

238 238 We aim to get things moving. That's why we share our knowledge with our partners. Picture credits: Fotolia.com pg. 1, 29 JSB31, pg. 1 Maridav, pg. 13 dedi, pg. 4, 15, 23, 47 KB3, pg. 17 Jerome Romme, pg. 19 RTimages, pg.49 Roland Spiegler, pg. 4, 55 Elenathewise, pg. 4, 57, 161 3darcastudio, pg. 143 virtua73, pg. 225 TELCOM-PHOTOGRAPHY

you can rely on: we are always at your side.

become a qualified expert in all of our drive

prepared for the challenges of today and

handle Becker solutions safely without the need

After all, we don t just want to make life

ll o eed to o abo t o r rre t emi ar a d emi ar

239 The BECKER academy Knowledge makes the difference As our partner, there s one thing you can rely on: we are always at your side. The BECKER academy makes it easy for you to become a qualified expert in all of our drive and control solutions so that you are well prepared for the challenges of today and tomorrow. Whether fitters, electricians or door manufacturers: they should all be able to handle Becker solutions safely without the need for further assistance. After all, we don t just want to make life easier for your customers, but for you too. ll o eed to o abo t o r rre t emi ar a d emi ar pa a e Your personal contact partner: Nadine Heep-Bassl Tel.: +49 (0) / nadine.heep-bassl@becker-antriebe.com academy

BECKER-Antriebe GmbH Drives and control units for

Friedrich-Ebert-Strasse 2 4 35764 Sinn, Germany

240 BECKER-Antriebe GmbH Drives and control units for roller shutters, sun protection and doors Friedrich-Ebert-Strasse Sinn, Germany Phone: +49 (0) / Fax: +49 (0) / info@becker-antriebe.com Item number psv-marketing.de, As at 02/2018

Tubular Drives and Mechanical Accessories. Product Catalogue

Tubular Drives and Mechanical Accessories Product Catalogue The data contained in this catalogue is intended for information purposes and is given in good faith. No liability may be derived therefrom.