General LCD Display (GLD)

Size: px

Start display at page:

Download "General LCD Display (GLD)"

Juniper Robertson
5 years ago
Views:

1 DPS Telecom Your Partners in Network Alarm Monitoring General LCD Display (GLD) USER MANUAL Visit our website at for the latest PDF manual and FAQs. June 2, 2010 D-OC-UM Version 1.0F

2 Revision History June 2, 2010 Updated pinouts for RS485/422 and RS232 GLD versions. March 28, 2008 Converted to H&M4 and added G4 and G5 connection sections This document contains proprietary information which is protected by copyright. All rights are reserved. No part of this document may be photocopied without prior written consent of DPS Telecom. All software and manuals are copyrighted by DPS Telecom. Said software and manuals may not be reproduced, copied, transmitted or used to make a derivative work, by either mechanical, electronic or any other means in whole or in part, without prior written consent from DPS Telecom, except as required by United States copyright laws DPS Telecom Notice The material in this manual is for information purposes and is subject to change without notice. DPS Telecom shall not be liable for errors contained herein or consequential damages in connection with the furnishing, performance, or use of this manual.

3 Contents Visit our website at for the latest PDF manual and FAQs 1 Overview Summary of Features Description Shipping List 2 Hardware Specifications GLD Connections Setting the Internal Address (v1.0d or older) Setting the Internal Address & Baud Rate (v1.0e or newer) Setting Baud Rate LED Indications Audible Notification LCD Operation Host Connections Multiple GLDs KDA Connection KDA Software Configuration NetGuardian Connection NetGuardian G2 Web Browser configuration NetGuardian G4 Web Browser Configuration NetGuardian G5 Web Browser configuration IAM Connection T/MonXM Connection T/MonXM Software Configuration 15

5 Overview Summary of Features View system status remotely Multiple display capabilities Speaker for audible notification Detailed alarm indication messages 1.2 Description The General LCD Display (GLD) allows the user to monitor an existing network from different locations by providing remote visibility of the system s status. This convenient method of monitoring gives the user the ability to monitor the network without being physically present at the system site. With detailed alarm indication messages, the GLD gives peace of mind to network managers who aren t able to constantly observe the system s status from the network s location. The GLD can easily daisy-chain from unit to unit. This means that up to 3 GLDs can be connected to a single host, with a maximum range of 1,500 feet between the host and the last GLD unit (the 1,500 foot maximum applies to a single GLD as well). The GLD is also easy to install, with connectors for all ports and mounting screws for easy attachment to any flat vertical surface. Along with the convenience of remote visual monitoring, the unit is equipped with a speaker for audible notification. The unit will sound when certain conditions occur, keeping the network manager informed of the system s status even when the unit is not being watched. Additionally, the Link LED on the face of the GLD indicates communication with the host. A red flash indicates receive activity while a green flash shows transmit activity. With detailed alarm messaging, multiple display capabilities and easy installation, the GLD is a simple solution to a network manager s remote monitoring needs.

6 Shipping List

7 Hardware Specifications Dimensions: Power Input: Current draw: Fuse: Interface: Operating Temperature Range: Operating Humidity Range: 5 1/8 H x 5 W x 1 1/2 D -48VDC 100mA Internal RS485 0 to +60 degrees Celsius (+32 to +140 degrees Fahrenheit) 0% to 95% non-condensing Mounting: Keyhole pattern on back for attachment to mounting screws (included)

4 2.2 GLD Connections 1) Mount the GLD in the desired location using the mounting template and the mounting screws provided. Position the case onto the screws then slide it down to lock into place.

The + and - ports are universal and therefore either side may be used as an IN port or an OUT port. (See figure 2.

8 4 2.2 GLD Connections 1) Mount the GLD in the desired location using the mounting template and the mounting screws provided. Position the case onto the screws then slide it down to lock into place. 2) Remove the screw-lug barrier plugs from the bottom of the GLD. (See figure 2.2) 3) Connect communication wires from the host to the IN terminals of the 4 position barrier plug. (See figure 2.2) If daisy chaining, connect communication wires from the OUT terminal to the IN terminal of the next GLD. The + and - ports are universal and therefore either side may be used as an IN port or an OUT port. (See figure 2.2.1) (Requires small standard screwdriver to work with small connectors) 4) Connect a -48VDC power lead and a GND lead to the corresponding terminals of the 2-position barrier plug. 5) All barrier screws should be seated firmly but not over-tightened so as to nick the bare wire. 6) Push the plugs firmly back into their appropriate location on the bottom of the case. 7) Once the hardware connections are complete, power the unit(s) by applying -48VDC to the power lead. WARNING Always observe electrostatic discharge (ESD) precautions Fig GLD barrier terminals Setting the Internal Address (v1.0d or older) Each unit must have a separate internal address. The address is stored internally and only needs to be set once prior to use. To set the internal address: 1). Enter Set Address mode by simultaneously holding down the + and buttons. 2). Use the up or down arrows to choose the desired address from the Set Address menu.* e.g.: GLD Addr: 2 +/- to change 3). Press SEL to accept the displayed address. An asterisk (*) will appear next to the address you have accepted. e.g.: GLD Addr: 2* MOD to exit 4). Press MOD to exit Set Address mode.

9 Setting the Internal Address & Baud Rate (v1.0e or newer) Each unit must have a separate internal address. The address is stored internally and only needs to be set once prior to use. To set the internal address: 1). Enter Set Address mode by simultaneously holding down the + and buttons. 2.) To set address press select. 3). Use the +/- buttons to choose address. 3). Press SEL to accept the displayed address. An asterisk (*) will appear next to the address you have accepted. e.g.: GLD Addr: 2* 4). Press MOD to exit Set Address mode Setting Baud Rate To set the baud rate: 1). Enter Set baud rate mode by simultaneously holding down the + and buttons. 2.) Press +, you will see "GLD baud". 3). Press SEL, then use the +/- buttons to adjust baud rate. 3). Press SEL to set. 4). Press MOD to exit LED Indications The Link LED indicates communication with the host. A red flash shows receive activity, while a green flash shows transmit activity. A slow red blink represents a communication link idle for more than 2 minutes, which is considered a communication failure. The LCD will show Link Down Audible Notification The host may activate the GLD speaker as certain conditions occur. Press the MOD/ACO button to locally terminate the sound LCD Operation Refer to the host s manual for specific operation details. * If using only 1 GLD unit, the address must be set to 1.

6 2.3 Host Connections The GLD can be connected to the KDA (page 7), the NetGuardian (page 9), the NetGuardian G4 (page 11), the NetGuardian G5 (page 12), the IAM (page 14) or T/MonXM (page 15).

10 6 2.3 Host Connections The GLD can be connected to the KDA (page 7), the NetGuardian (page 9), the NetGuardian G4 (page 11), the NetGuardian G5 (page 12), the IAM (page 14) or T/MonXM (page 15). Note: There are host version requirements to connect the GLD. See the individual host sections in this manual for specific minimum version requirements Multiple GLDs Up to twelve GLDs can be installed at one site. The units can be connected to a host in a daisy chain configuration as shown in the figure below or in a star configuration. Whether connecting 1, 2, or 12 GLD units to the host, the maximum connection length is 1,500 feet. The + and - from the host channel are connected to the IN side of the communication plug on the bottom of the GLD. The OUT side of the communication plug is for daisy chaining to other GLDs.* * The + and - ports are universal and therefore either side may be used as an IN port or an OUT port.

7 2.3.2 KDA Connection 1). Connect communication wires from the J11 DB9 female connector on the back panel of the KDA. (See figure 2.3.2a) 2).

11 KDA Connection 1). Connect communication wires from the J11 DB9 female connector on the back panel of the KDA. (See figure 2.3.2a) 2). From the J11 data port on the KDA, connect the communication wires to the 4 position barrier plug of the GLD. Pin 1 is connected to the negative terminal of the GLD and pin 2 is connected to the positive terminal of the GLD. (See figure 2.3.2b and table A) Note: KDA Time Stamp version 1.7D and above is required to connect the GLD. Fig a - Communication lines between the KDA and GLD Fig b - KDA J11 pinout to GLD Table A - J11 pinout information to GLD J11 Pin # GLD Comm terminal Wire Color 1 Negative (-) Blue/White 2 Positive (+) White/Blue

8 2.3.2.1 KDA Software Configuration 1). From the main menu screen, select Hardware Setup. (See figure 2.3.2.1a) 2).

(See figure 2.3.2.1b) Note: The Firmware type must be set to Timestamp and Docking module 1 must be set to RS485. (See figure 2.3.2.1b) Fig. 2.3.2.1a - "Hardware Setup" can be accessed from the main screen Enter the number of GLDs being connected Fig.

12 KDA Software Configuration 1). From the main menu screen, select Hardware Setup. (See figure a) 2). From the Edit Hardware Setup pop-up window, enter the number of GLD units you are connecting (1-3) in the auxiliary displays section and press OK. (See figure b) Note: The Firmware type must be set to Timestamp and Docking module 1 must be set to RS485. (See figure b) Fig a - "Hardware Setup" can be accessed from the main screen Enter the number of GLDs being connected Fig b - The "Edit Hardware Setup" menu pops up when the "Hardware Setup" button is selected

13 NetGuardian Connection Note: NetGuardian version 1.5C and above is required to connect the GLD. The NetGuardian must have an RS485 or RS232 port for GLD support. Communication lines between the NetGuardian G2 and GLD Communication lines between the NetGuardian G4 and GLD Communication lines between the NetGuardian G5 and GLD

14 NetGuardian G2 Web Browser configuration 1). From the main screen, select Edit and then Ports. 2). Scroll down to the Options portion of the Ports screen. 3). Enter the number of GLDs you are connecting to the NetGuardian. 4). Hit the Submit Data button. Note: If connecting more than 3 GLDs, set the NetGuardian baud rate to 9600 (see the NetGuardian user manual). Fig Web Browser configuration for connection to GLD

15 NetGuardian G4 Web Browser Configuration 1). From the main screen, select Edit and then Ports. 2). Scroll down to the Options portion of the Ports screen. 3). Enter the number of GLDs you are connecting to the NetGuardian G4. 4). Hit the Submit Data button. Note: If connecting more than 3 GLDs, set the NetGuardian G4 baud rate to 9600 (see the NetGuardian G4 user manual). Fig Web Browser configuration for connection to GLD

12 2.3.3.3 NetGuardian G5 Web Browser configuration 1). From the main screen, select Edit and then Ports. 2). Scroll down to the Options portion of the Ports screen. 3).

16 NetGuardian G5 Web Browser configuration 1). From the main screen, select Edit and then Ports. 2). Scroll down to the Options portion of the Ports screen. 3). Enter the number of GLDs you are connecting to the NetGuardian G5. 4). Hit the Submit Data button. Note: If connecting more than 3 GLDs, set the NetGuardian G5 baud rate to 9600 (see the NetGuardian G5 user manual). Fig Web Browser configuration for connection to GLD

13 2.3.4 IAM Connection 1). Connect communication wires from a DB9 modular port on the back panel of the IAM. (See figure 2.3.6a) 2).

17 IAM Connection 1). Connect communication wires from a DB9 modular port on the back panel of the IAM. (See figure 2.3.6a) 2). From the DB9 port, connect the communication wires to the 4 position barrier plug of the GLD. Pinout 1 = Rx-, Pinout 2 = Tx+, Pinout 3 = Tx-, and Pinout 7 = Rx+. (See figure 2.3.6b and table C) 3). Tie communication wires 2 and 7 together for connection to the positive terminal of the GLD and tie communication wires 1 and 3 together for connection to the negative terminal of the GLD. 4). For software configuration for the IAM, see the section in this manual regarding T/MonXM software configuration (pages 15-17). Note: IAM version 3.5D1 and above is required to connect the GLD. Fig a - Communication lines between the IAM and GLD Fig b - IAM DB9 pins to GLD Table C - DB9 pinout information to GLD DB9 Pinout GLD Comm terminal Wire Color 1 Negative (-) White/Blue 2 Positive (+) Blue/White 3 Negative (-) White/Blue 7 Positive (+) Blue/White

14 2.3.5 T/MonXM Connection 1). Connect communication wires from an RJ12 connection on the back panel of the T/MonXM. (See figure 2.3.7a) 2).

18 T/MonXM Connection 1). Connect communication wires from an RJ12 connection on the back panel of the T/MonXM. (See figure 2.3.7a) 2). From the RJ12 connection, connect the communication wires to the 4 position barrier plug of the GLD. Wire 1 = O/W Tx+, Wire 2 = W/O Tx-, Wire 5 = W/B Rx-, and Wire 6 = B/W Rx+. (See figure 2.3.7b and table D) 3). Tie communication wires 1 and 6 together for connection to the positive terminal of the GLD and tie communication wires 2 and 5 together for connection to the negative terminal of the GLD. Note: T/MonXM version 3.5E and above is required for GLD support. T/MonXM must have the card with the RS485 port to connect the GLD. Fig a - Communication lines between the T/MonXM and GLD Fig b - RJ12 pins to GLD Table D - RJ12 pinout information RJ12 Pinout GLD Comm terminal 1 Positive (+) 2 Negative (-) 5 Negative (-) 6 Positive (+)

15 2.3.5.1 T/MonXM Software Configuration 1). From the main menu of T/MonXM, select the Parameters menu. 2). Select Remote Ports menu. (See figure 2.3.7.

Select the E)dit Option. (See figure 2.3.7.1b) 5). Setup port usage for DCP(F) Interrogator (2400 BAUD). (See figure 2.3.7.1b) 6).

19 T/MonXM Software Configuration 1). From the main menu of T/MonXM, select the Parameters menu. 2). Select Remote Ports menu. (See figure a) Fig a - The parameters menu is available from the main menu 3). Select the data port you are plugging the GLD into by pressing F)ind and entering the number. (See figure b) 4). Select the E)dit Option. (See figure b) 5). Setup port usage for DCP(F) Interrogator (2400 BAUD). (See figure b) 6). Select Enter (Enter sets the automatic defaults) until you reach the DCPF Mode setting and type X. (See figure b) 7). Resume selecting Enter (default) until you reach the RTS Time settings. (See figure b) 8). Set the RTS Lead to 30 and the RTS Tail to 10 and press enter again. (See figure b)) Physical communication line location (port number) Fig b - Enter the default settings in the Remove Ports screen except for the fields highlighted above

16 9). Select F1 for Devices. (See figure 2.3.7.1b) 10).Select the address for the GLD (must be either 1, 2 or 3). (See figure 2.3.7.1c) 11).At Device type, select GLD. (See figure 2.3.7.1c) Model Numbers Fig.

20 16 9). Select F1 for Devices. (See figure b) 10).Select the address for the GLD (must be either 1, 2 or 3). (See figure c) 11).At Device type, select GLD. (See figure c) Model Numbers Fig c - Enter the default settings in the Remote Device screen except for the fields highlighted above General LCD Display (GLD): DB9 cable (NetGuardian): DB9 cable (KDA): DB9 cable (IAM): RJ45 cable (NetGuardianG4/G5) D-PC A-04 D-PR A-50 D-PR A-50 D-PR A-50 D-PR-NGCBL (50') D-PR-NGCBL (75') D-PR-NGCBL (200')

23 Warranty DPS Telecom warrants, to the original purchaser only, that its products a) substantially conform to DPS' published specifications and b) are substantially free from defects in material and workmanship. This warranty expires two years from the date of product delivery with respect to hardware and ninety days from the date of product delivery with respect to software. If the purchaser discovers within these periods a failure of the product to substantially conform to the specifications or that the product is not substantially free from defects in material and workmanship, the purchaser must promply notify DPS. Within reasonable time after notification, DPS will endeavor to correct any substantial non-conformance with the specifications or substantial defects in material and workmanship, with new or used replacement parts. All warranty service will be performed at the company's office in Fresno, California, at no charge to the purchaser, other than the cost of shipping to and from DPS, which shall be the responsiblity of the purchaser. If DPS is unable to repair the product to conform to the warranty, DPS will provide at its option one of the following: a replacement product or a refund of the purchase price for the non-conforming product. These remedies are the purchaser's only remedies for breach of warranty. Prior to initial use the purchaser shall have determined the suitability of the product for its intended use. DPS does not warrant a) any product, components or parts not manufactured by DPS, b) defects caused by the purchaser's failure to provide a suitable installation environment for the product, c) damage caused by use of the product for purposes other than those for which it was designed, d) damage caused by disasters such as fire, flood, wind or lightning unless and to the extent that the product specification provides for resistance to a defined disaster, e) damage caused by unauthorized attachments or modifications, f) damage during shipment from the purchaser to DPS, or g) any abuse or misuse by the purchaser. THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In no event will DPS be liable for any special, incidental, or consequential damages based on breach of warranty, breach of contract, negligence, strict tort, or any other legal theory. Damages that DPS will not be responsible for include but are not limited to, loss of profits; loss of savings or revenue; loss of use of the product or any associated equipment; cost of capital; cost of any substitute equipment, facilities or services; downtime; claims of third parties including customers; and injury to property. For an additional fee DPS may, at its option, make available by written agreement only an extended warranty providing an additional period of time for the applicability of the standard warranty. Technical Support If a purchaser believes that a product is not operating in substantial conformance with DPS' published specifications or there appear to be defects in material and workmanship, the purchaser should contact our technical support representatives. If the problem cannot be corrected over the telephone and the product and problem are covered by the warranty, the technical support representative will authorize the return of the product for service and provide shipping information. If the product is out of warranty, repair charges will be quoted. All non-warranty repairs receive a 90-day warranty.

Free Tech Support is Only a Click Away Need help with your alarm monitoring? DPS Information Services are ready to serve you in your email or over the Web! www.dpstelecom.

Every issue has news you can use right away: Expert tips on using your alarm monitoring equipment advanced techniques that will save you hours of work Educational White Papers deliver fast informal

24 Free Tech Support is Only a Click Away Need help with your alarm monitoring? DPS Information Services are ready to serve you in your or over the Web! Free Tech Support in Your The Protocol Alarm Monitoring Ezine The Protocol Alarm Monitoring Ezine is your free tech support alert, delivered directly to your in-box every two weeks. Every issue has news you can use right away: Expert tips on using your alarm monitoring equipment advanced techniques that will save you hours of work Educational White Papers deliver fast informal tutorials on SNMP, ASCII processing, TL1 and other alarm monitoring technologies New product and upgrade announcements keep you up to date with the latest technology Exclusive access to special offers for DPS Telecom Factory Training, product upgrade offers and discounts To get your free subscription to The Protocol register online at Free Tech Support on the Web: MyDPS MyDPS is your personalized, members-only online resource. Registering for MyDPS is fast, free, and gives you exclusive access to: Firmware and software downloads and upgrades Product manuals Product datasheets Exclusive user forms Register for MyDPS online at DPS Telecom Your Partners in Network Alarm Monitoring (800) E. Yale Avenue, Fresno, California 93727

B Polling Interface

Your Partners in Network Alarm Management 232-485B Polling Interface USER MANUAL Visit our website at www.dpstelecom.com for the latest PDF manual and FAQs. July 31, 2006 D-OC-UM067.31100 Firmware Version