VAMP 50 series. with native IEC and arc flash protection. Protection CUSTOMER BENEFITS

Transcription

1 01 with native EC and arc flash protection CUSTOMER BENEFTS Robust and flexible hardware Modular design with versatile hardware expansion for communication, arc protection and digital /O extension Designed for demanding industrial conditions Slimline models available The protection relay family is based on proven technology concepts developed in close cooperation with customers. Vamp products have been designed around user-friendliness, a feature which is proven in our customer reports day after day. The VMP 50 over current and earth fault protection relay has been developed to cover basic protection needs for OEMs, utilities and industrial applications. Thanks to its cost-effective and flexible design, the Vamp 50 provides an excellent alternative for various protection applications. Vamp 52 combines further protection functions such as directional earth fault for feeder and motor protection. rc flash sensors connected in the advanced arc option module typically trips the breaker within 7 ms. Common technology for cost efficiency Powerful CPU supporting native EC Utilisation of common VMP platform accessories mproved safety with economical and fast arc flash protection (optional) User-friendly and high functionality Common firmware platform with VMP 200 and 300 Series Only active functions visible for the operator Standard USB connection (type B) for setting software (VMPSET) Modern Human Machine nterface (HM) Large and clear LCD display Single line diagram mimic with control, indication and live measurements Programmable function keys and LEDs

2 02 VMP 50 family: low and mid range relay series with EC ESE OF USE User-friendliness has always been a feature of VMP products, and the is no exception. great deal of effort has gone into the design of the operational aspects of the new products. The rapid setting and download/upload is achieved with the unique VMPSET setting software which dramatically improves usability. Unicode support allows the menu text and settings to be translated into various international languages including for example Russian and Chinese. The informative human machine interface shows all of the required information for the user with support of customised legend texts. VMP 50 FMLY HM NTERFCE Navigation push buttons 128 x 64 LCD dot matrix display Single line diagram and freely assignable analogue values Unicode language support Local port USB interface Function buttons with: User configurable legend texts CB control Protection setting group selection Freely programmable The template for user legend texts is a part of the product documentation. The texts are printed on a transparent film allowing customisation of the relay. Programmable LEDs User configurable legend texts 12 LEDs, 2 fixed (power, error) and 8 freely programmable (2 for push buttons) Two optional module slots Extends the functionality of the relay Remote port: RS485, RS232 & Ethernet (RJ-45 or fibre) rc, D/DO

3 03 Enhanced usability The VMP 50 protection relay concept has been extended with a number of features that make installation and testing of the relays even more efficient and user-friendly. VMP 50S COMPCT DESGN FOR LMTED SPCE The is now also available as the VMP 50S, which includes a more compact case than the basic design. The VMP 50S is an ideal choice for ring main unit switchgear and other applications where a horizontal mounted relay is required. n the VMP 50S, the protection, measurement and control functions and communication interfaces are identical to the basic 50 series of relays. Vamp 50 default model Vamp 50S The VMP 50S is an ideal choice for applications where a horizontal mounted relay is required. Communication for Vamp 50 / 52 / 55 Vamp is an expert in communication with vast experience in interfacing different system integrators, SCD, RTUs, PLCs and gateways using a large number of supported protocols. Flexible adaptation of the communication protocols together with powerful and easy to use software tools are the key to successful integration. VMP 50 series and the VMPSET tool provide access to practically any power system information you may need. NTVE EC The EC protocol can be used to read or write static data or to receive events sent spontaneously from the relay. n addition, the interface allows peer-to-peer communication between the relays, known as GOOSE. The EC interface is configured with familiar, user-friendly VMPSET software. The EC datamodel, data-sets, report control blocks and GOOSE communication are configured according to the requirements of the system configuration. VMPSET is also used to produce CD files, which may be needed for the substation integration. The Vamp 50 series EC61850 implementation is native, which means the functionality is integral to the product design and software, providing fast and efficient operation. VMP 50 COMMUNCTON PROTOCOLS EC EC Modbus TCP Modbus RTU Profibus DP DNP 3.0 SP-bus communication EC Device Net Human-Machine- Communication, display Human-Machine- Communication, PC Communication Type, Connector and Communication Port for optional communication module 1 Comm. Module 1 Comm. Type Type of connector Comm. Port No communication option. D Serial Plastic / Plastic Fiber Remote E Serial Glass / Glass Fiber Remote F Serial Rx Plastic / Tx Glass Fiber Remote G Serial Rx Glass / Tx Plastic Fiber Remote Remote Serial D9 K Extension* Ethernet RJ-45 TCP / P (10 Mbps) P Serial (Profibus) D9 Remote R Ethernet ST (x2) TCP / P (100Mbps) S Ethernet RJ-45 (x2) TCP / P (100Mbps) B Serial 3-Pole screw Remote L Serial D9 Remote M Serial D9 Remote Extension * Not compatible with Extension port in module M (different pin order). ll possible combinations for Communication Module 1 and Communication Module 2 Module 1 Module 2 D E F K P R S B L M B C E G B C E G B C ** E G ** Note that Extension port will be only available through one interface at the time (D9 or Glass Fiber). Communication Type, Connector and Communication Port for optional communication module 2 Comm. Module 2 B C Comm. Type RG-B (Clock Sync) Serial (RTD nterface) Type of connector No communication option. Comm. Port 2-Pole screw *** Glass fiber E Ethernet RJ-45 G Ethernet LC *** Does not apply. Extension TCP / P (10 Mbps) TCP / P (100Mbps)

4 04 rc flash protection When traditional time-grading or blocking protection coordination principle is used, it may not provide fast enough protection of substation faults. Further, high-impedance type of earthfaults may cause prolonged operation times of earth-fault relays leading to the significant release of arcing energy. These facts pose a considerable risk to operation personnel and economical assets. By applying a modern, high-speed arc protection system the damage may be considerably reduced. Such an arc protection system is an optional feature that can be incorporated in all current measuring VMP relays. VMP relays measure fault current and with optional arc protection, also measure light via arc sensor channels, which provide monitoring for the whole switchgear. Should an arc fault occur in the switchgear the arc protection system provides extremely fast tripping of the circuit breaker. The fault will be prevented from spreading and quickly isolated, which may save RC PONT SENSORS Traditional protection relay systems do not provide fast enough protection in arc-fault situations. rc flash protection integrated in VMP relays enables substation level, ultra-fast arc protection. The system uses protection relay hardware and separate arc sensors. ny arc flash fault in the cable compartment is selectively cleared by the feeder protection relay. ny arc flash fault in the circuit breaker or busbar compartment is tripped by the incoming circuit breaker. The exact location of the arc flash will be detected by the arc flash and relay protection system. Point sensor V1EH-x 1) (pipe) Cable L> (CB, BB) Point sensor V1D-x 1) (surface) CB BB CB CB Cable Cable The optional integrated arc protection system may extend the lifetime of the switchgear. L> (CB, BB)

5 05 Protection VMPSET Setting and Configuration Tool VMPSET is a user-friendly, free-of-charge relay management software for setting parameters and configuring VMP relays. Via the VMPSET software, relay parameters, configurations and recorded data can be exchanged between PC and VMP relays. Supporting the COMTRDE format, VMPSET also incorporates tools for analysing relay events, waveforms and trends from data recorded by the relays, e.g. during a network fault situation. Standard USB VMP relays support standard COMTRDE type disturbance recording files which can be communication uploaded/downloaded for evaluation of any network event recorded. cable can be used. Using a standard serial cable the PC running VMPSET connects to the front port of the VMP relays. The VMPSET software also supports TCP/P communication via an optional port. Featuring true multi-language support the software runs on Windows 7 / Vista / XP / 2000 / NT and Windows 98 / 95 without any need for configuration of the PC. The phase sequences for currents and voltages can be read on-line from the clear and explicit The VMPSET software is future-proof, supporting future updates and new VMP products. NPUT /OUTPUT OPTONS The host various optional modules in order to upgrade the relay functionality from basic to more advanced applications. phasor diagram screen for easy commissioning of the relay. VMP 50 VMP 52 VMP 55 nalog inputs 3x 1 x o 3x 1 x o, 1 x U 4xU Digital inputs 2 (7) 2 (7) 2 (7) Trip relays 4 (5) 4 (5) 4 (5) m output Option Option Option rc protection Option Option - USB USB USB RS 485/RS 232/ Fibre/Ethernet RS 485/RS 232/ Fibre/Ethernet RS 485/RS 232/ Fibre/Ethernet Option Option Option Control relays Front port Optional rear port External RTD input module

6 06 Measurements and condition monitoring The offers a complete set of measurement functions to replace the conventional metering functions of switchgear and controlgear installations. The measurement functions cover phase, line and residual currents, current imbalance, system frequency and harmonics from phase currents. Condition monitoring continuously monitors trip circuits, breaker wear and current Type of measurement EC Symbol Protection function / measurement Primary current 3 Three-phase current Feeder protection Motor protection Special applications VMP50 VMP52 VMP52 VMP55 3l 0 2 L Zero sequence current Current unbalance verage and maximum demand current Primary voltage U/3U One/ three-phase and line voltage U 0 Zero sequence voltage U2 / U 1 Relative voltage unbalance Frequency f System frequency Harmonics 2nd to 15th and THD of phase currents U 2nd to 15th and THD of measured voltages Voltage sags / swells nalog m output, 1 channel U Voltage sags / swells O ny measured or calculated value, freely scalable, optional Control Digital inputs Number of digital inputs (max) Output relays Number of trip relays (max) Number of alarm relays Object status indication Local and remote control nterlocking and logic Single line diagram, 8 objects Number of controllable objects Configurable Condition monitoring Trip circuit TCS Trip Circuit Supervision CT Supervision VT Supervision CB wear TCS Trip Circuit Supervision with D for T5...T8 CT Supervision VT Supervision/Fuse failure supervision Breaker wear

7 07 Protection stages User-friendliness is also a built-in feature of protection stages, where setting views are graphically displayed in the relay and VMPSET HM. Disabled protection stages are hidden from the menu in order to display only the necessary information. Protection stages come with two setting groups to enable automatic transfer from main setting to alternative setting. This change can be universal for the entire relay or or based on protection function. The relay has a large number of standard inverse curves to adopt various protection requirements. Unique protection curves can be applied when standard EC or EEE curves do not provide required protection selectivity. Protection Feeder Motor Voltage Type of fault. EEE Device No. EC Symbol Protection function / measurement /51 3 > Three-phase non-directional overcurrent, low-set stage, definite or inverse time Short circuit 50/51 3l >> Three-phase non-directional overcurrent, high-set stage, definite time 50/51 3l >>> Three-phase non-directional overcurrent, high-set stage, definite time Earth-fault 50N/51N l 0 > Non-directional earth-fault, low-set stage, sensitive, definite or inverse time 50N/51N l 0 >> Non-directional earth-fault, high-set stage, definite time Overload Voltage n = number of voltage channels 50N/51N l 0 >>> Non-directional earth-fault, high-set stage, definite time 50N/51N l 0 >>>> Non-directional earth-fault, high-set stage, definite time 67N-EF l ntermittent transient intermittent earth-fault protection 0T 67N or 50N/51N l > Directional or non directional earth-fault, low-set stage, sensitive, definite or inverse time 67N or 50N/51N l >> Directional or non dir. earth-fault, high-set stage, definite or inverse time 59N U 0 > Residual overvoltage, low-set stage 59N U 0 >> Residual overvoltage, high-set stage 50N/51N U 0 >>> Residual overvoltage, high-set stage 59N U 0 >> Restricted earth fault (application) 59N U 0 >>> Residual overvoltage, high-set stage 50N/51N REF Restricted earth fault (application) 49M T> Three-phase thermal overload (motors & generators) 49F T> Three-phase thermal overload (feeders & cables) 59 1U>/3U> One-/three-phase overvoltage, low-set stage U>>/3U>> One-/three-phase overvoltage, high-set stage U>>>/3U>>> One-/three-phase overvoltage, high-set stage U>>>> Three-phase overvoltage, high-set stage U>>>>> Three-phase overvoltage, high-set stage 3 24 U f >, U f >> Volts/hertz overexcitation protection 27 1U</3U< One-/three-phase undervoltage, low-set stage U<</3U<< One-/three-phase undervoltage, high-set stage U<<</3U<<< One-/three-phase undervoltage, instantaneous stage U<<<< Three-phase undervoltage, instantaneous stage U<<<<< Three-phase undervoltage, instantaneous stage 3 27P U 1 <, U 1 <<, U 1 <<< Three-phase undervoltage, instantaneous stage stage for generator applications 47 U 2 >, U 2 >>, U 2 >>> Negative sequence overvoltage rc protection 50RC/50NRC 3 > / 0 >, L> Electrical arc protection stage, point sensors, optional Other functions 79 O --> uto-reclosure 68 nrush and cold load detection 46 2 / 1 > Current unbalance protection (in feeder mode) 46 2 > Phase unbalance protection (in motor mode) 47 2 >> Phase sequence / incorrect phase sequence protection 48 Excessive starting time 37 3< Loss of load / under current protection 86 Latched trip 66 Restart inhibit 32 P</P<< One-/Three-phase reverse power and underpower protection F2 > f2 Magnetising inrush 68F5 > f5 Transformer overexcitation 50BF CBFP Circuit breaker failure protection 81H/81L f ><, f >><< Overfrequency and underfrequency protection 81H/81L f >>><<< Overfrequency and underfrequency protection 81L f<, f<< Underfrequency protection 81L f<<< Underfrequency protection 81R df/dt Rate of change of frequancy (ROCOF) protection 25 Synchrocheck 99 8 Programmable stages DR Disturbance recorder

8 08 VMP 50 overcurrent and earth fault relay VMP 50 is a basic protection relay used for LV and MV feeders in industrial and utility applications, as well as for back-up protection. The limited amount of protection functions make this unit cost-efficient, user-friendly and easy to use. The hardware design allow simple addition of integrated optional modules like arc sensor interface, extension of D / DO channels and various communication modules. n addition to the default model, relays are also available as a slimline (S) Typical application / VMP 50, feeder mode BB CB Cable 3 50 / 51 3> VMP 50 49F T> 46R > 2/ 1 3> > o 3> > > 50N/51 N 0>, 0> > 0>> > 0>> >> 50BF CBFP 68F5 > f5 68 > f2 50N RC rc > 0 50RC 74TC 86 rc > TC S Loc kout

9 09 VMP 50 CONNECTON DGRM L1 L2 L X2:1 X2:2 ~ Comm. option Front - 0 X1:1 X1:2 X1:3 X1:4 X1:5 X1:6 X1:7 X1:8 X1:9 X6:1 X6:2 X6:3 X6:4 X6:5 X6:6 X6:7 X6:8 X3:3 D1 - X3:4 D1 + X3:5 D2 - X3:6 D2 + L1 L2 L X1:10 X1:11 U0/UL1/U12 /O extension module rc option or D / DO module D VMP 50 T1 Remote X3:17 X3:16 T2 X3:15 T3 T4 1 SF m out option m X3:14 X3:13 X3:12 X3:11 X3:10 X3:7 X3:9 X3:8 X3:18 X3:19 X3: X3:1 O+ X3:2 O- Option module arc rc option X6:1 BO+ X6:2 BO- X6:3 B+ X6:4 B- X6:5 L1 + X6:6 L1 - X6:7 L2+ X6:8 L2- B/O L> 0ption module advanced arc rc option X6:1 BO1+ X6:2 BO1- X6:3 B1+ X6:4 B1- X6:5 n/a X6:6 S1 X6:7 S1 X6:8 S2 X6:9 S2 X6:10 S3 X6:11 S3 B/O L> /O extension module D / DO module X6:1 X6:2 X6:3 D3 X6:4 Comm X6:5 D4 X6:6 D5 X6:7 Comm X6:8 Di6 D D T5 Module arc has two arc sensor interfaces and connectivity from/to other relays via B/O channel. The operating time for arc flash fault trip is typically 15 ms. The arc module advanced arc with three sensors reaches typical operation time of 7 ms.

10 10 VMP 52 feeder and motor protection relay VMP 52 is a multi-function relay used for LV and MV feeders in industrial or utility applications. BB Extensive thermal protection functions make this relay optimal for low and medium sized asynchronous motors. Directional earth fault protection in association with autoreclose function makes this relay cost effective for feeder protection applications where automatic fault clearance is needed. Vamp 52 is flexible, user-friendly and easy to use. The hardware design allows simple addition of integrated optional modules like arc sensor interface, extension of D / DO channels and various communication modules. + CB Cable 3 Uo, UL o r U o D 50 / 51 3> 3> > 3> > > 50N/ 51 N 0>, 0> > 0 >>> 0 >>>> 50N RC rc 01 > 50 RC rc > 79 VMP 52 49F T > 68F5 f5 > 67N 0 > 0> > 59N U 0 > U 0 > > 46R > 2/ 1 68 f2 > 67NT 0T> 59 (1 1 U> 1 U> > 1 U> > > 27 (1 1 U< 1 U< < 1 U< < < O 1 8 pgr The VMP 52 relay is also available as a slimline (S) version. Typical application/vmp 52, Feeder mode with auto-reclose 50 BF CBFP 74TC 86 TC S Lo c ko ut 1) lternative to Uo protection BB + CB Cable 3 50 / 51 3> VMP 52 49F T > 46R > 2/ 1 Uo, UL o r U 3> > 3> > > 68F5 f5 > 68 f2 > o D 50N/ 51 N 0>, 0> > 0 >>> 0 >>>> 50N RC rc 01 > 50 RC rc > 79 67N 0 > 0> > 59N U 0 > U 0 > > 67NT 0T> 59 (1 1 U> 1 U> > 1 U> > > 27 (1 1 U< 1 U< < 1 U< < < M RTD VO 12 Fiber or RS485 O 1 8 pgr 50 BF CBFP 74TC TC S 86 Lo c ko ut Typical application/vmp 52, Motor mode 1) lternative to Uo protection

11 11 VMP 52 CONNECTON DGRM L1 L2 L X2:1 X2:2 ~ Comm. option Front - 0 Remote dn da U0 X1:1 X1:2 X1:3 X1:4 X1:5 X1:6 X1:7 X1:8 X1:9 X6:1 X6:2 X6:3 X6:4 X6:5 X6:6 X6:7 X6:8 L1 L2 L X1:10 X1:11 U0/UL1/U12 /O extension module rc option or D / DO module VMP 52 T1 X3:17 X3:16 T2 X3:15 T3 T4 1 SF m out option X3:14 X3:13 X3:12 X3:11 X3:10 X3:7 X3:9 X3:8 X3:18 X3:19 X3: X3:3 D1 - X3:4 D1 + X3:5 D2 - X3:6 D2 + D m X3:1 O+ X3:2 O- X1:11 X1:10 Should the voltage transformer connection be phase to phase the voltage measuring mode is selected 1LL Option module arc rc option X6:1 BO+ X6:2 BO- X6:3 B+ X6:4 B- X6:5 L1 + X6:6 L1 - X6:7 L2+ X6:8 L2- B/O L> Option module advanced arc rc option X6:1 BO1+ X6:2 BO1- X6:3 B1+ X6:4 B1- X6:5 n/a X6:6 S1 X6:7 S1 X6:8 S2 X6:9 S2 X6:10 S3 X6:11 S3 B/O L> U12 UL1 X1:11 X1:10 When the voltage transformer is connected to transform the phase to ground voltage, the voltage measuring mode shall be 1LN /O extension module D / DO module X6:1 X6:2 X6:3 D3 X6:4 Comm X6:5 D4 X6:6 D5 X6:7 Comm X6:8 Di6 D D T5

12 12 VMP 55 voltage protection relay The VMP 55 is a multi-function relay suitable for voltage and frequency protection for both utility and industrial applications and also for synchrocheck applications. The relay is equipped with 4 voltage inputs that can be configured with any of the available predefined voltage mode setups. Typical application/vmp 55 Cable The VMP 55 relay is also available as a slimline (S) version. CB BB VT 59 VMP P 3U> 3U> > 3U< 3U< < U 1< U 1< < 3U> > > 3U< < < 47 U 2> 59N Uo > Uo > > 24 Uf> Uf>> U 2> > 81 H/ 81 L 81 L 81 R f> < f> >< < f< f< < df/d t 25 f, v 3LN+LLy / LNy = phase voltage and synchrocheck 8 p g r 50BF C BFP 74TC TC S 86 Lo c ko ut 3LN + Uo = Line to neutral and zero sequence voltage

13 Protection 1-13 X2:1 X2:2 ~ VMP 52 Protection functions Front Comm. option - 0 X1: 1 X1: 2 X1: 3 X1: 4 X1: 5 X1: 6 X1: 7 X1:8 X1: 9 X1:10 X1: 11 X6:1 X6:2 X6:3 X6:4 X6:5 X6:6 X6:7 X6:8 L1 L2 L U /U 1/ U12 /O extension module rc option or D / DO module 50 /51 3> >, > 0 U< 3>> >>, >> 0 U<< VMP 55 CONNECTON DGRM 3>>> 46R 2/1 > 46 2> 47 2>> 48 st> 66 N> 37 3< 67N 0 > >> 0 utorecloser matrix 50N/51N 67NT 0T> 59N U > U 0 >> 0 >> 49 T > 68 f2 > 59 U> U>> U>>> 79 uto Reclose 27 U<<< 50BF CBFP 50RC rc > 50NRC rc 01 > 74TC TCS 86 Lockout Blocking and output matrix T1 Remote X3:17 X3:16 T2 X3:15 T3 T4 X3:14 X3:13 X3:12 X3:11 X3:10 C1 X3:7 F X3:18 m out option X3:9 X3:8 X3:19 X3: VMP 55 3 D1-4 D1+ 5 D2-6 D2+ D m Option module arc rc option X6:1 BO+ X6:2 BO- X6:3 B+ X6:4 B- X6:5 L1 + X6:6 L1 - X6:7 L2+ X6:8 L2- B/O L> Option module advanced arc rc option X6:1 BO1+ X6:2 BO1- X6:3 B1+ X6:4 B1- X6:5 n/a X6:6 S1 X6:7 S1 X6:8 S2 X6:9 S2 X6:10 S3 X6:11 S3 B/O L> 1 SF /O extension module D / DO module X6:1 X6:2 X6:3 D3 X6:4 Comm X6:5 D4 X6:6 D5 X6:7 Comm X6:8 Di6 D D T5 ULLY * VMP 59 line differential relay The Vamp 59 is designed for the protection of medium voltage over head lines and cables. Versatile firmware enables this relay to also be used in applications with in-zone transform ers. The relay includes back-up protection functions for basic overcurrent and earth fault func tions with three phase autoreclose. Further information can be found in the dedicated Vamp 59 product brochure.

14 14 Dimensional drawings DEFULT MODEL VMP 50 mm in Vamp F1 OK F Panel mounting technique Vamp OK F1 F Vamp F1 F2 OK > Vamp 52 Vamp 52 OK F1 F2 OK F1 F2

15 15 VMP 50S PNEL MOUNTNG mm in Vamp 52S (140)* 5.64 (5.51)* (160.8)* 6.22 (6.33)* (26.2)* 1.13 (1.03)* (94)* (3.70)* OK F1 F * Without panel gasket Vamp 52S OK F1 3 3a F2 min. 2.5mm 2 x x1 4 3b 3c mm in Vamp 52S VMP 50S OK F1 F1 F2 F2 F2 F1

16 16 Main technical data uxiliary voltage Voltage range V ac / dc (option ) V dc (option B) Measuring circuit Rated phase current N Current measuring range 1/ x N Rated neutral current 0N 1 or 5 (optionally 0.2 or 1 ) Current measuring range Thermal withstand Rated frequency f N x N 4 x N (continuous) 100 x N (for 1 s) 50 / 60 Hz (45 65 Hz) / O Digital inputs (external voltage) Selectable nominal voltage (threshold) Trip contacts 2 pcs (7 option) 24 / 110 / 220 V ac / dc 4 pcs (5 option) Disturbance tests Standard & Test class / level Emission EN / EC Test value Conducted EN class / EC MHz Emitted EN class / EC / CSPR MHz mmunity EN / EC Mhz damped oscillatory wave EC kVp CM, 1kVp DM Static discharge (ESD) EN class V / EC kv contact, 15 kv air Fast transients (EFT) EN class V / EC class ±4 kv / (±2 kv signal ports), 5/50 ns, 5 khz Surge EN class / EC kv, 1.2/50 ms, CM 1 kv, 1.2/50 ms, DM Conducted HF field EN class / EC MHz, 10 Vemf Emitted HF field EN class / EC MHz, 10 V/m Voltage interruptions EN / EC %/1s, 60%/0.1s, 100%/0.05s Voltage alternative component EN / EC % of operating voltage (DC) / 10min Voltage dips and short interruptions EN %/10ms, 100%/10ms, 60%/100ms >95%/5000ms Power-frequency magnetic field EN /m (continuous), 1000/m / 1-3s Pulse magnetic field EN /m, 1.2/50 ms Electrical safety tests Standard & Test class / level Test value mpulse voltage withstand EN , class 5 kv, 1.2/50 ms, 0.5 J Dielectric test EN , class 2 kv, 50 Hz nsulation resistance EN Protective bonding resistance EN Power supply burden EC

17 17 Mechanical tests Standard & Test class / level Test value Device in operation Vibrations EC , class / EC , Fc 1Gn, 10Hz 150 HZ Shocks EC , class / EC , Ea 10Gn/11ms Device de-energized Vibrations EC , class / EC , Fc 2Gn, 10Hz 150 HZ Shocks EC , class / EC , Ea 30Gn/11ms Bump EC , class / EC , Ea 20Gn/16ms Environmental conditions Device in operation Standard & Test class / level Test value Dry heat EN / EC , Bd +65 C Cold EN / EC , d -40 C Damp heat, cyclic EN / EC , Db From +25 C to +40 C, From 93% RH to 98% RH, 6 days Damp heat, static EN / EC , Cab +40 C, 93% RH, 10 days Flowing mixed gas corrosion test, method 2 Flowing mixed gas corrosion test, method 4 Device in storage EC , Ke EC , Ke Dry heat EN / EC , Bb +75 C Cold EN / EC , d -40 C +25 C, 75% RH, 10 ppb H 2 S, 200 ppb NO 2, 10 ppb CL C, 75% RH, 10 ppb H 2 S, 200 ppb NO 2, 10 ppb CL 2, 200 ppb SO 2 Casing Degree of protection (EC 60529) Dimensions (W x H x D) Material Weight Colour code Standard & Test class / level P x 170 x 210 mm 1 mm steel plate 2.0 kg RL 7032 (Casing) / RL 7035 (Back plate) Package Dimensions (W x H x D) Weight (Terminal, Package and Manual) Standard & Test class / level 260 x 160 x 215 mm 2.4 kg

18 18 Order codes V Note: Relay type 0 Overcurrent & earth fault relay 2 Feeder and motor protection relay 5 Voltage protection relay Default model Slimline model (S) ** Option available only with communication module 1: B and L!! Supply voltage has to be 110 Vac/dc or more. Check out our website for DualPortEthernetnterface_ppNote_006". V50 or V52 Relay type = Default S = Slim line Phase current inputs [] 3 = 5 Earth-fault current input [] = 1 / 5 B = 0.2 / 1 Supply Voltage [V] = Vac / dc B = Vdc m output option = None B = m output D nominal activation voltage 1 = 24 Vdc / 110 Vac 2 = 110 Vdc / 220Vac 3 = 220 Vdc Optional /O extension modules = None *** B = Digital /O; 4 x D, 1 x DO C = rc (2 x rc sensor + BO) D = dvanced arc (3 x rc sensor + BO) *** Optional communication module 1 = None D = Plastic / Plastic serial fibre interf. E = Glass/Glass serial fibre interf. F = Rx Plastic / Tx Glass serial fibre interf. G = Rx Glass / Tx Plastic serial fibre interf. K = K = RJ-45 10Mbps ethernet interf. inc EC P = Profibus interface R = 2 x ST 100Mbps ethernet fibre interface, inc. EC 61850!! S = 2 x RJ Mbps ethernet interf. inc. EC B = RS 485 interface (2-wire) with option for module 2 L = RS232 interface with option for module 2 M = RS-232 inteface with option for module 2 and ext /O + RG B Optional communication module 2 = None B = RG-B timesyncro. input ** C = RTD interface (Glass fibre) ** E = RJ Mbps ethernet interf. inc. EC ** G = LC 100 Mbps ethernet fibre interf. inc. EC ** PCP coating = Default V55 Relay type = Default S = Slim line Nominal voltage [V] 4 = V (default size) X = None Supply Voltage [V] = Vac / dc B = Vdc m output option = None B = m output D nominal activation voltage 1 = 24 Vdc / 110 Vac 2 = 110 Vdc / 220Vac 3 = 220 Vdc Optional /O extension modules = None B = Digital /O; 4 x D, 1 x DO Optional communication module 1 = None D = Plastic / Plastic serial fibre interf. E = Glass/Glass serial fibre interf. F = Rx Plastic / Tx Glass serial fibre interf. G = Rx Glass / Tx Plastic serial fibre interf. K = K = RJ-45 10Mbps ethernet interf. inc EC P = Profibus interface R = 2 x ST 100Mbps ethernet fibre interface, inc. EC 61850!! S = 2 x RJ Mbps ethernet interf. inc. EC B = RS 485 interface (4-wire) with option for module 2 L = RS232 interface with option for module 2 M = RS-232 inteface with option for module 2 and ext /O + RG B Optional communication module 2 = None B = RG-B timesyncro. input ** C = RTD interface (Glass fibre) ** E = RJ Mbps ethernet interf. inc. EC ** G = LC 100 Mbps ethernet fibre interf. inc. EC ** PCP coating = Default

19 19 CCESSORES Order code Description Note VX052-3 USB programming cable (Vampset) Cable length 3 m VX054-3 nterface cable to VP 3 CG (Profibus module) for RS 232 Cable length 3 m VX044 nterface cable to VO 12 (RTD module) Cable length 2 m VSE001PP Fibre optic nterface Module (plastic - plastic) Max. distance 1 km VSE001GG Fibre optic nterface Module (glass - glass) Max. distance 1 km VSE001GP Fibre optic nterface Module (glass - plastic) Max. distance 1 km VSE001PG Fibre optic nterface Module (plastic - glass) Max. distance 1 km VSE002 RS485 module VP3CG Profibus DP fieldbus option board Requires external power module, to be used when both ethernet and profibus communications are needeed VO 12 VO 12 B VO 12 C VO 12 D RTD Module, 12pcs RTD inputs, Optical Tx Communication ( Vac/dc) RTD Module, 12pcs RTD inputs, RS 485 Communication ( Vac/dc) RTD/m Module, 12pcs RTD inputs, PTC, m inputs/outputs, RS232, RS485 and Optical Tx/Rx Communication (24 Vdc) RTD/m Module, 12pcs RTD inputs, PTC, m inputs/outputs, RS232, RS485 and Optical Tx/Rx Communication ( Vac/dc) V 1 D-6 rc Sensor Cable length 6 m V 1 D-20 rc Sensor Cable length 20 m V50WF V50 wall assembly frame

20 20 DEVCE TRCK RECORD Schneider Electric s VMP range specialises in protection relays, arc flash protection and measuring and monitoring units for power systems. VMP s medium-voltage and subtransmizzssion protection relays are used in numerous applications, from overhead line feeders and substations to power plants and industrial power system. Their unique integrated arc flash fault protection functionality enhances the safety of both people and property and has made VMP a leading range in arc flash protection worldwide. VMP products meet the latest international standards and regulations. Schneider Electric ndustries SS 35, rue Joseph Monier CS F Rueil Malmaison Cedex (France) Tel.: +33 (0) RCS Nanterre Capital social NRJED111266EN s standards, specifications and designs change from time to time, please ask for confirmation of the information given in this publication. Design: Schneider Electric ndustries SS - Sonovision Photos: Schneider Electric ndustries SS Printed in Finland This document has been printed on recycled paper Schneider Electric ndustries SS - ll rights reserved