1 Airflow via normal convection or forced-air cooling devices in the enclosure or housing outside of the subrack.

Size: px

Start display at page:

Download "1 Airflow via normal convection or forced-air cooling devices in the enclosure or housing outside of the subrack."

Aron Park
5 years ago
Views:

T Accessories n Subrack Cooling n Vertical Cooling From Bottom To Top D 1 Airflow via normal convection or forced-air cooling devices in the enclosure or housing outside of the subrack.

For the cooling of enclosures and housings, rack mounted fans, rack-mounted heat exchangers and rack-mounted cooling units are also available.

1 T Accessories n Subrack Cooling n Vertical Cooling From Bottom To Top D 1 Airflow via normal convection or forced-air cooling devices in the enclosure or housing outside of the subrack. 2 Vertical forced airflow, supported by fans installed at the bottom of the subrack (1U). For the cooling of enclosures and housings, rack mounted fans, rack-mounted heat exchangers and rack-mounted cooling units are also available. 1 HE d Fan Mounting Plate For installing 120 mm fans in 4U/7U/11U subrack. For mounting on the subrack side panels. 1.5 mm aluminum Surface Finish: Anodized 1 fan mounting plate U For PCB No. of HP Order No. Order No. depth fan mounting Fan mounting plate Fan mounting plate plates required DC fan AC fan 160 mm mm mm mm mm 3 Note: Terminal block, Order No is also required for each subrack TE Diagonal Cooling From Front To Back Diagonal airflow from front to back allows individual cooling of PCBs in both a vertical and horizontal installation position. An air baffle and air partition ensures controlled airflow. 7 HE TE = HP HE = U, T = Depth t 194

Product Information Subrack Climate Control Air Baffle For controlled airflow in 7U subracks.

1 mm aluminum Surface Finish: Anodized 1 air baffle, assembly parts Subrack Depth a b depth (t) mm Order No.

b * 125 125 7 7 120 7 90 7 a a Air Partition For controlled airflow in the subrack.

3684019, Packs of 100 sets. Epoxy 1 air partition U Order No.

2 Product Information Subrack Climate Control Air Baffle For controlled airflow in 7U subracks. For mounting on the subrack side panels with the aid of mounting blocks. 1 mm aluminum Surface Finish: Anodized 1 air baffle, assembly parts Subrack Depth a b depth (t) mm Order No. (T) mm * b b * a a Air Partition For controlled airflow in the subrack. The partitions are mounted to the horizontal rails together with the backplanes. Assembly screws and washers, Order No , Packs of 100 sets. Epoxy 1 air partition U Order No. 1/ HE = U Air Block For Unused Slots To block unused slots and prevent air-flow. The air block panel is mounted between the plastic guide rails by simply snap-fastening. Polycarbonate, self-extinguishing to UL 94 VO Color: Blue For plastic Packs Order No. guide rail of 160 mm

Cooling For VME64x/CompactPCI RiCool-1 Blower 110cfm (190m 3 /h) The powerful RiCool-1 blowers have been designed to provide effective cooling for CompactPCI systems which require a redundant cooling

64mm (H2O) of static pressure confirms that the RiCool-1 blower is able to provide effective cooling in a densely packed CompactPCI system. By comparison, a typical system cooled with three 4.7" x 4.

Under those conditions one RiCool-1 blower provides at least 40% higher airflow. Pst 1.6 1.2.8.4.3 222 Performance diagram 3344.012/.024/.

3 Cooling For VME64x/CompactPCI RiCool-1 Blower 110cfm (190m 3 /h) The powerful RiCool-1 blowers have been designed to provide effective cooling for CompactPCI systems which require a redundant cooling feature and/or have a heat dissipation of over 500W. The ability of the RiCool-1 blower to generate 1.6"/40.64mm (H2O) of static pressure confirms that the RiCool-1 blower is able to provide effective cooling in a densely packed CompactPCI system. By comparison, a typical system cooled with three 4.7" x 4.7" 18W (110cfm at free delivery) muffin fans, generates only 0.22" to 0.40" (H2O) static pressure point of a muffin fan assembled, fully loaded CompactPCI system is 0.3" to 0.5" (H2O). Under those conditions one RiCool-1 blower provides at least 40% higher airflow. Pst Performance diagram /.024/ V Air displacement (cfm) Pst Static pressure difference (inches of H2O) Typical performance diagram of RiCool Typical performance diagram of tubeaxial muffin fans V File No. E Each 19" CompactPCI system can accept two RiCool-1 blowers. Electromagnetic Emissions For RiCool-1 Blowers The RiCool-1 blowers comply with the EMI Standard per FCC part 15, subpart J of Docket 20780, Class A & B emissions limit across the frequency spectrum from 30MHz to 1GHz. Safety RiCool-1 is in conformity with the requirements of the Low Voltage Directive, Nr. 73/23/EEC EN 60950: A1 +A2 +A3 +A4 +A11. Features And Benefits Uses only 1U of rack height Available in 12V, 24V and 48V dc Fan alarm via fan speed sensor Optional speed control Designed to move air effectively through densely packed subracks Easy access Hot swapable for fast and easy maintenance Ability to use two blowers in 19 applications Locked rotor protection Polarity protection Automatic restart capability Configuration clear zinc chromate steel housing Includes: complete fan assembly: ready for mounting in subrack, with Molex pin male mini-fit connector Airflow Direction: exhausts outward from back of subrack Power Consumption: 48W Operating Temperature: -10 C to +60 C / +14 F to +140 F RiCool-1 Blower Performance Data cfm: 110cfm(190m 3 /h) Static Pressure: 40.64mm (1.6 inch) of H2O Voltages: 12, 24, 48V dc Rated Current: 4, 2, 1 Amps Noise Level Free Blowing: 56.2dBa Weight: 5 lbs. (2.3 Kg) RiCool-1 Blower Construction Housing: cold rolled steel Impeller: Noryl 94V0 Bearing: ball bearing Power/alarm connector: Molex Alarm Signal: rpm sensor Life At Full Speed: 60, C 50, C Please inquire for separate AC/DC RiCool-1 power supply. RiCool-1 is also available in 19 blower trays (see above photo). Please note that the airflow, power consumption, rated current and weight are double for the 19 fan trays. For more information, please contact the factory.

4 Cooling For VME64x/CompactPCI n RiCool-1 Blower 110cfm (190m 3 /h) Front View ( ) diam. Extraction holes (43.1) 1.70 Top View ( ) Connector Detail Pin #3, inverted alarm (blue-low on pass) Pin #2, program speed control (yellow) Pin #1, second ground (green) Large Air Intake ( ) Rear View Air exit (43.1) (13.437) ( ) Air flow Pin #4, power (-) (black) Pin #5, power (+) (red) Pin #6, non-inverted alarm (blue/white-high on pass) RiCool-1 Blowers Description Qty Order No. RiCool-1 blower 12V RiCool-1 blower 24V RiCool-1 blower 48V RiCool-1 blower 48V with internal thermistors Temperature/Speed Control Thermistors Description Qty Order No. PTC thermistor for 12V PTC thermistor for 24V PTC thermistor for 48V Note: The thermistors come with a 600mm (2') cable Pin Location Description Pin #1, second motor ground (green) Pin #2, program speed control (yellow) Pin #3, inverted alarm (blue-low on pass) Pin #4, power (-) (black) Pin #5, power (+) (red) Pin #6, non-inverted alarm (blue/white-high on pass) Alarm Characteristics Pin #3 inverted alarm, max load of 0.05A at 60V DC Pin #6 non-inverted alarm, max load of.015a at 5.5V DC Trigger speed at 40% of max speed 10 second signal delay Alarm condition causes +5V DC increase in supply voltage measured between pin #3 and pin #1 Customer supplied pull-up resister at interfacing alarm required to limit current to blower alarm circuit RiCoo-1l Hot Plug Connector Description Qty Order No. 6 Pin Molex RiCool-1 1 Part of RiCool mounted receptacle Pin Molex cpci system mounted plug

Cooling For VME64x/CompactPCI RiCool-2 Blower 180cfm (300m 3 /h) RiCool-2 is a follow-on development to the highly successful RiCool-1 blower RiCool-1 was primarily designed for CompactPCI and VME

5 Cooling For VME64x/CompactPCI RiCool-2 Blower 180cfm (300m 3 /h) RiCool-2 is a follow-on development to the highly successful RiCool-1 blower RiCool-1 was primarily designed for CompactPCI and VME systems with heat loss from 30W to 70W per slot (21 slots) RiCool-2 is primarily designed fro AdvancedTCA systems with a heat loss of 200W per slot (14 slots) Uses only 1U of rack height Initially available in 48V, followed by 12V and 24V Designed to move air effectively through densely packed subracks Hot swappable for fast and easy access/maintenance Ability to use 2 or 4 blowers in a 19" application For indoor applications Mechanical: Housing: stainless steel Weight: 1.72Kg (3.8 lbs) Conductive Surface: recycling per EN Base Tray: 1.5mm (16 gauge) Cover: 0.8mm (18 gauge) Wheel: polycarbonate, black, UL 94-V0 Connector: Version 1: Molex Version 2 and 3: DIN Type C, 30 pin Temperature Range: Operating Temperature: -10 C +75 C Storage Temperature: -40 C +80 C 224 Humidity: 0 to 95% RH, non-condensing Noise: 65dB (A) at full speed, free blowing 55dB (A) at 70% speed, free blowing MTBF: Life At Full Speed: 60,000h at 40 C 50,000h at 50 C >35,000h at 70 C Higher MTBF at 70% of full speed at 40 C expected under normal operating conditions. Performance: 180cfm (300m 3 /h) High static pressure at zero flow of inch (71mm) H2O; ideal when air filters are used (typical muffin fans have inch H2O) Service Friendly Field Replaceable unit (FRU) design Hot Swap, redundant design Optional configurations: RiCool-1 minimum control functions PICMG 2.9 compatible control functions PICMG 3.0 IPMI compatible control functions COTS (Commercial Off The Shelf) 12V, 24V and 48V solutions 48V now available, 12V and 24V please inquire Pst V Pst Performance diagram V Air displacement (cfm) Static pressure difference (inches of H2O) Typical performance diagram of RiCool-2 Typical performance diagram of RiCool-1 Typical performance diagram of tubeaxial muffin fans

6 VME64x/CompactPCI n RiCool-2 Blower 180cfm (300m 3 /h) RiCool-2 Version 3 Connector Connector Pin-Out For Version DIN Type C 30 Pin C B A 1. A1 Motor Power +/-(1) 2. A2 N/C (2) 3. A3 48V_B (2) 4. A4 N/C (2) 5. A5 GND (1) 6. A6 GA7 (2) 7. A7 IPMB Power (2) 8. A8 GA5 (2) 9. A9 IPMB Power (2) 10. A10 GA2 (2) 11. B1 Motor Power +/-(1) 12. B2 N/C (2) 13. B3 48V_A (2) 14. B4 N/C (2) 15. B5 Flame Sensor (2) 16. B6 GA6 (2) 17. B7 12C Data 1(2) 18. B8 GA4 (2) 19. B9 12C Data 0 (2) 20. B10 GA1 (2) 21. C1 Enable A (3) 22. C2 Enable B (3) 23. C3 N/C (2) 24. C4 FPS Ground (1) 25. C5 IPMB Enable (3) 26. C6 GND (2) 27. C7 12C Clock 0 (2) 28. C8 GA3 (2) 29. C9 12C Clock 0 (2) 30. C10 GA0 (2) Motor Specifications: Nominal Voltage: 48 VDC (12 VDC and 24 VCD optionally available) Operating Voltage Range: 48 VDC = VDC Low Start Voltage: 32 VDC Nominal Running Current: 48V/1.7 Amps Start Current: ramps to any desired set-point Locked Rotor Current: 2.1 Amps Nominal Running Power: 80 Watts Nominal Speed: 4500 rpm +/-10% (free delivery) Start Up Time: 15 sec. Max Motor Type: brushless DC Motor Protection: by integrated circuit, fuse Bearings: permanently lubricated ball bearings Air Flow: 160cfm min 180cfm maximum at full power Acoustic: 65 dba at full power, 55 dba at 70% of full power Locked Rotor Protection: electronic Polarity Protection: yes Automatic Restart Capability: integrated circuit Version 3 Features: Polarity protected Locked rotor protection Automatic restart Programmability On board thermistor Input fusing Over temperature alarm LED Red LED Blue Toggle switch Temperature sensor Flame sensor Dual power input The RiCool-2 blower will have the means to detect a failure in the base management controller (BMC) and/or management application (MA). Upon detecting a failure, the blower will revert to a self sustaining mode of operation. Sensors (thermistors, hall-effect switches, voltage, etc.) will support all of the sensor device commands derived by the BMC. Sensor device commands are defined in section 3.0 of PICMG 3.0. Base Tray Mounted PCB Includes: All basic motor controls Mezzanine control board connections Thermistor located in outlet air stream Temperature sensor Flame sensor 1 LED red for fail per PICMG LED blue for hot swap removal per PICMG toggle switch for hot swap removal per PICMG 3.0 PCB is designed for 48V/24V/12V blower applications Regulatory Compliances: UL recognized per category CPWV2: fans, electric components CUL recognized per category CPWV8: fans, electric cert. Canada TUV certified to EN CE mark to comply with: Maschinernrichtlinien 89/392 EWG Niederspannungsrichtlinien 73/23/EEC FCC part 15, subpart J of Docket 20780, Class A & B radiated and conducted emissions spectrum from 30MHz to 1GHz Physical protection when installed, IP20 EN (safety of electrical equipment) EN (safety of electrical machines) Version 2: PICMG 2.9 system management bus (SMBus) compatible Version 1: RiCool-1 compatible (with improved airflow performance) Version Compatibility VDC Qty Order No. 3 PICMG PICMG inquire 1 RiCool inquire 1 RiCool inquire 1 RiCool inquire 225

Accessories Fan AC Fan For subracks and microcomputer systems. 1 fan without connection cable Note: Assembly parts must be ordered separately. Order No.

3 Dimensions A B Bearing Rated voltage Wattage Noise Temperature Volume flow Packs of Order No. (mm) of fan V (AC) / Hz level db (A) range C in m 3 /h 80 79.5 71.5 Ball bearing 115/60 11.0 42 40.

7 Accessories Fan AC Fan For subracks and microcomputer systems. 1 fan without connection cable Note: Assembly parts must be ordered separately. Order No , packs of 1 set (4 assembly screws) Cable length Packs of Order No. 610 mm (UL) mm A B 38 7 AC fan 4.3 Dimensions A B Bearing Rated voltage Wattage Noise Temperature Volume flow Packs of Order No. (mm) of fan V (AC) / Hz level db (A) range C in m 3 /h Ball bearing 115/ Ball bearing 230/ Ball bearing 115/ Ball bearing 230/ DC Fan Including temperature-dependent speed control via additional temperature sensor. 1 fan with connection cable (310 mm) Note: Assembly parts must be ordered separately. Order No , packs of 1 set (4 assembly screws) A B DC fan with speed control and alarm signal Dimensions A B Bearing Rated voltage Voltage Wattage Noise Temperature Volume flow Packs of Order No. (mm) of fan V (DC) range volt level db (A) range C in m 3 /h Ball bearing Ball bearing Ball bearing Ball bearing DC fan without speed control, with alarm signal Dimensions A B Bearing Rated voltage Voltage Wattage Noise Temperature Volume flow Packs of Order No. (mm) of fan V (DC) range volt level db (A) range C in m 3 /h Ball bearing Ball bearing Ball bearing Ball bearing

Motor - Motor Temperature sensor Finger Guard For AC/DC fans. Polyamide self-extinguishing to UL 94-VO Color: Black 1 finger guard For fans Packs of Order No.

8 Accessories n Fan Temperature Sensor For fans with speed control. 1 temperature sensor Voltage Packs of Order No. 12 V (DC) V (DC) M + Power supply - Earth Temperature sensor Alarm signal (optional) Type 10/Type 17 R C R (NTC) Alarm signal Alarm power supply + Motor - Motor Temperature sensor Finger Guard For AC/DC fans. Polyamide self-extinguishing to UL 94-VO Color: Black 1 finger guard For fans Packs of Order No. 80 mm mm EMC Shielding Plate For AC/DC fans. 1 mm aluminum Surface Finish: Clear chromated 1 EMC shielding plate For Fans Packs of Order No. 80 mm mm Rear panel Finger guard EMC filter guard Fan 227

9 43.6 (1 HE) Order Information Rack-Mounted Fans For mm (19") Air Throughput 320/480 m 3 /h n Two basic types provide universal applications, both for the ventilation of individual subracks and for enclosures and cases. Technical Description Rack-mounted Fans: Versions with a distance between axis of 85 mm for 160 mm deep PCBs and of 105 mm for 220 mm deep PCBs Fan unit with speed control SK : with fault evaluation via floating contact Technical Description Vario Rack-mounted Fan: Via an additional guide frame, may be used in: Subracks 84HP mm (19") mounting angles The guide frame offers a high level of flexibility, i.e. simply slide in the fan insert, lock into position Tapped strips inserted in the guide frame ensure variable positioning of the fan insert in the subrack Pre-configured connectors ensure secure, problem-free inter-connection Fan unit with speed control SK Fault evaluation via floating contact Rack-mounted fan/vario rack-mounted fan: Fully wired unit ready for connection, including terminal strip and assembly parts. Rack-mounted Fan May be fitted to mm (19") mounting angles (19 ) LED display (version with monitoring Mounted between a pair of mm (19") -mounting angles 85/105 HE = U Vario Rack-mounted Fan By means of additional guide frame, may be used in: Subrack 84HP mm (19") mounting level (19 ) LED display (version with monitoring Mounted in subracks 84HP (1 HE) Mounted between a pair of mm (19") -mounting angles /105 HE = U SK Rack-mounted Fan Vario SK Rack-mounted Fan Order No. SK Order No. SK 2 fans Distance between axes 85 mm ) ) ) ) fans Distance between axes 85 mm ) ) ) fans Distance between axes 105 mm ) ) ) ) ) 2 ) 24 V (DC) 115 V (AC) 230 V (AC) 24 V (DC) 24 V (DC) 115 V (AC) 230 V (AC) 24 V (DC) Rated operating voltage Volt V V (AC) (AC) Matching guide frame ) ) 1 ) Delivery times available on request 2 ) Version with monitoring Accessories Temperature indicator 230 V (AC) Thermostat Speed control Technical Specifications Order No. SK ) ) Rated operating voltage AC 230 V AC 115 V DC 24 V AC 230 V AC 115 V DC 24 V DC 24 V AC V Frequency 50/60 Hz 50/60 Hz - 50/60 Hz 50/60 Hz - 50/60 HZ Rated current 0.24 A/0.22 A 0.46 A/0.46 A 0.49 A 0.36 A/0.33 A 0.69 A/0.69 A 0.74 A 0.85 A Pre-fuse T 6 A Number of fans 2 3 Air throughput, unimpeded air flow 320 m 3 /h 480 m 3 /h Operating temperature - 10 C to + 55 C Noise level 51 db (A) 52 db (A) 51 db (A) 51 db (A) 52 db (A) 51 db (A) 228

Order Information Air throughput 320 m 3 /h 480 m 3 /h Voltage 24 V (DC) 115 V 230 V 24 V (DC) 115 V 230 V 24 V (DC) 115-230 V (AC) No.

10 Order Information Air throughput 320 m 3 /h 480 m 3 /h Voltage 24 V (DC) 115 V 230 V 24 V (DC) 115 V 230 V 24 V (DC) V (AC) No. of fans 2 3 Distance between axis 85 mm 105 mm 85 mm 105 mm 85 mm 105 mm Order No SK rack-mounted fan Order No. Vario rack-mounted fan Order No. Matching Guide frame for Vario SK Guide Frame Guide frame including connector and fitted connection cable (3 m), bracket for optional attachment to the mm (19") system, assembly parts. Note: Rack-mounted fan with 48 V available on request Also Required: Order a guide frame to suit the application. Approvals for all rack-mounted fans, CE compliant 229

Ripac VME/VME64x Systems. Applications. Design Features

Ripac VME/VME64x Systems. Applications. Design Features Overview Of Systems For VMEbus Ripac VME/VME64x Slim-Box Ripac VME/VME64x Systems Ripac VME/VME64x Systems 1, 2, 3, 4U/2, 4, 6, 8 slot in AC input Order No. see pages 110-112 For backplanes see page 60