Monitoring system with data logger MS5D, MS5

Transcription

1 Monitoring ytem with data logger MS5D, MS5 Server room, data center Food and beverage indutry Pharmaceutical indutry Blood tation, pharmacie Horticulture and cultivation of plant HVAC - heating, ventilation, air conditioning Building automation Reearch and development Laboratorie Single-channel to ixteen-channel data logger are deigned for recording of value from tranducer of variety of quantitie, alarm tate indication, and proce control. Data logger with tranducer configured accordingly to client order can meaure analog ignal, frequency, count impule, evaluate two-tate quantitie and read data from device compatible with Modbu RTU and ADAM Advantech protocol. Input ignal are connected to removable terminal block located on the logger upper ide. Analyzing of the record i enabled after data download to the peronal computer by mean of the included program via USB, RS232, Ethernet or GSM modem. Local or remote online data preentation i alo enabled. Monitor ing yt em Data logger enable to: Acquire data online by mean of the Ethernet interface. Communication via: SNMP, SOAP, internet www page. Get information from data logger by mean of the SMS meage - actual value, alarm, memory occupation and other - a repone to SMS requet from the uer and after alarm creation at the logger. Data logger hould be connected via GSM modem upporting SMS. Configure individually each input channel for meaurement, alarm evaluation and data logging, including individual data logging interval for each input. Program individually each input channel different mode of record (continuou record, time dependent record, record only if pecified logic condition are matched, record triggered by external ignal, etc.). Set up to four different logic condition for each channel to active alarm. Each condition compare meaured value from input with et limit. It i poible to et hyterei and delay of condition validity. Aign to each input channel name of actual recorded proce to identify monitored object (e.g. type of monitored product). It i enabled to elect thi name from data logger keyboard during the operation. Indicate alarm tate after matching defined combination up to four alarm from any input. Store everal configuration profile (all logger parameter etting) for different meauring tak and elect profile from logger keyboard. Connect everal data logger via RS485 bu or Ethernet network. Available data logger: MS5D * for wall mounting or to the witch board * for mounting to watertight cae MP033, MP034 * dual line illuminated alphanumeric diplay * four control button * 32 alarm LED MS5 * all function a MS5D * without LCD diplay, without control button, without alarm LED * alarm i indicated by one common LED. 29

2 Monitoring ytem with data logger MS5D, MS5 Monitoring ytem TYPE A0 A1* B0* B1* B2* C0 C1 C2 D0* D1* D2* D5* D4* E0 E1 E2 E4 F* J* K* K1* K3 N* T* O* P* Q* S* S1 CTU CTK FU MEASURED VALUE dc current 4to 20 ma dc current 4to 20 ma dc current 0 to 20 ma dc current 0to 1A dc current 0to 5A ac current 0 to 20mA ac current 0 to 1A ac current 0 to 5A dc voltage 0 to 100mV dc voltage 0 to 1V dc voltage 0 to 10V dc voltage -10 to +10V dc voltage +75V ac voltage 0 to 100mV ac voltage 0 to 1V ac voltage 0 to 10V ac voltage 0 to 50V meaurement of reitance input for Nickel RTD temperature enor Ni1000, 6180 ppm/ C, range -50 to +250 C input for Platinum RTD temperature enor Pt100, range -140 to +600 C input for Platinum RTD temperature enor Pt1000, range -140 to +600 C precie input for RTD temperature enor Pt1000, range -10 to +50 C thermocouple K (NiCr-Ni) range -70 to C thermocouple T (Cu-CuNi) range -200 to +400 C thermocouple J (Fe-Co) range -200 to +750 C thermocouple S (Pt10%Rh-Pt), range 0 to C thermocouple B (Pt30%Rh-Pt), range +100 to C binary input for potential-le contact binary voltage input counter input for voltage ignal counter input for potential-le contact and open collector input for meaurement of frequency voltage ignal TABLE OF INPUTS ACCURACY 100 to 250 C ±0.2% (±20mV) -50 to 100 C±0.2 C from reading -140 to+100 C ±0.2 C 100 to 600 C±0.2% from reading -140 to+100 C ±0.2 C 100 to 600 C ±0.2% from reading ±0.06 C ±(0.3% C) from reading ±(0.3% C) from reading ±(0.3% C) from reading NOTE With ource approximately 21V for two-wire tranducer with current loop (e.g. temperature and humidity tranducer Comet). Only galvanically not iolated. for paive ening of current two-wire connection two-wire connection two-wire connection two-wire connection available alo with enor and tranmitter Two -wire connection. Only galvanically not iolated. A vailable alo with enor. lineariz ed, cold junction compenation lineariz ed, cold junction compenation lineariz ed, cold junction compenation ±(0.3% C) from reading from +200 to C lineariz ed, cold junction compenation ±(0.3% + 1 C) from reading from +300 to C lineariz ed, without cold junction compenation Maximum reitance of cloed contact: 1000 ohm minimum duration for recording: 200m Voltage for witched ON tate: 3 to 30Vdc, input current in the witched ON tate: 1 to 9mA - depending on the applied voltage, minimum duration for indication of change: 200m,.. Vo ltage for HIGH tate (for counter tatu change): 3 to 24Vdc, maximum pule frequency 5kHz, backed-up operation,. Ma ximum pule frequency 5kHz, programmable filter of pule open collector ringing, backed-up operation during power main failure, maximum reitance of cloed contact: 10 kohm, minimum reitance of open contact: 250 kohm, galvanically uniolated. 0 to 5kHz, reolution 1Hz, accuracy ±(0.2% from reading + 1Hz), input voltage for tate "H": 3 to 24Vdc, input current in tate "H": approximately 7mA, minimum duration of input impul: 30u,.. FK RP input for meaurement of frequency contact witching input for erial ignal RS485 for device upporting Modbu RTU or Advantech 0 to 5kHz, reolution 1Hz, accuracy ±(0.2% from reading + 1Hz), maximum reitance of cloed contact: 10 kohm, minimum reitance of open contact: 250 kohm, minimum duration of input pule: 30u, galvanically uniolated. E. g. meaurement from Comet tranmitter Tx4xx with RS485 digital output. Galvanically iolated. Maximum peed Bd. 30 Note: Input marked (*) are not and have common ground. Thee input are available alo a galvanic iolated. Galvanic iolated analog input are marked with letter G following the name of input type (e.g. input for paive meaurement of current 4-20mA - type A1 - with galvanic iolation i marked A1G). Galvanic iolation i not deigned a afety protection.

3 Monitoring ytem with data logger MS5D, MS5 PROGRAM FOR PERSONAL COMPUTER Setting of all ytem parameter and the tored data proceing i performed by the PC oftware for Window. Included oftware - freeware i poible to download free from It enable to communicate with logger through a erial RS232 link or through an RS485 network (long ditance or everal networked logger), via USB, by mean of modem (line or GSM) or via optional Ethernet interface. It alo enable to configure the logger, read recorded value and diplay actual value of the input. It i poible to view and print recorded value in numeric format and export to dbf format for conequent analyi in any data proceor (e.g. MS Excel). Free program verion doe not work with graph. Optional oftware SWR006 for Window i alo available. Program ha all function a free program. In addition optional oftware enable: - mot complex graphic proceing of recorded data including any zooming of time and vertical axe - on-line graphic viualization of curve with electable refreh interval - the Diplay Mode - the Ditant Diplay Mode on Internet/ Ethernet network - direct record of the Diplay Mode to the PC - automatic data download to the PC in preprogrammed interval - automatic data export to the PC in preprogrammed interval in dbf format - record of data to the network - adminitration of uer and paword Memory type: Total memory capacity: Data logging mode: Data logging interval: Real time clock: Input meaured value (1 to 16 input): AD converter (analog channel): Supported interface for communication with computer: TECHNICAL PARAMETERS internal SRAM, backed-up by Lithium battery 2MB ( up to value) noncyclic - logging top after filling the memory cyclic - after filling memory oldet data i overwritten by new adjutable individually for all input channel from 1 econd to 24 hour year, leap year, month, day, hour, minute, econd, backed-up by Lithium battery fixed by intalled input module for each channel (ee table) in accordance with client order reolution 16 bit, converion duration approximately 60m/channel RS232 (RxD,TxD,RTS,CTS,GND), cable up to 15 m. Enable direct connection with the PC or via GSM modem - included USB interface - included RS485 - cable up to 1200 m,, enable to connect everal data logger to one communication line - included Ethernet interface LAN - optionally Monitor ing yt em Communication peed: Output for alarm indication: Power: Operating temperature range: Dimenion including connector: Protection: Warranty: 9600, 19200, 57600, Bd 1) Red LED at the ide of the cae, 32 LED - only MS5D data logger 2) Relay max. 8A/250Vac, witching-over contact 3) Voltage ignal 0V/4.8V, maximum current 50mA 4) Alarm can be ignalled alo by meage, SNMP trap, SMS 9 to 30Vdc, 24Vdc recommended 0 to +50 C 215x225x60mm IP20 2 year Power and communication connector, alarm output Included Acceorie: Traceable calibration certificate from the manufacturer with declared metrological ethalon traceability in accordance with EN ISO/IEC Included i alo RS232 communication cable of 2 meter length and free program for Window. Program enable to control all logger function and view and print the record. 31

4 Architecture of monitoring ytem with data logger MS5 D, MS6D ALARMS via: - ANALOG or GSM MODEM - SMS - , SNMP TRAP - PHONE DIALER - AUDIBLE SIGNAL PC AUDIBLE ALARM UNIT SMS COMMUNICATION via - USB - RS232 - RS485 - ETHERNET - GSM PHONE DIALER Monitoring ytem GSM MODEM ALARM OUT RELAY CONTACT 230V SOCKET POWER ADAPTER ETHERNET, RS485 EXTERNAL DISPLAY & KEYBOARD OUTPUTS OUTPUT RELAYS MODULE INPUTS RS485 CONROLLED DEVICE CONROLLED DEVICE temperature CONROLLED DEVICE T4111 temperature tranducer Txx18 interior temperature, humidity, preure enor other monitored device RS Hx43x range temperature, humidity, preure enor Tx41x range temperature, humidity, preure enor T4411 temperature tranducer

5 Monitoring ytem MSx - optional acceorie Common optional acceorie for data logger MS6 and MS5 Software: SWR006 Optional oftware for Window - comfort graphic environment data acquiition, including online graph, automatic data download, remote Diplay mode on Internet- Ethernet network, toring data on the network, adminitration of uer and paword and many other.. Optional input for erial RS485 ignal: SWR008 RS485IN Program package Databae MS Program for work with data from Comet MSx logger. Program enable i.a.: - To view elected channel from any Comet logger together with elected channel of other Comet logger. - Meaurement from different Comet device i poible to combine in one table or graph. - To chooe any time interval for analyi. - Print, export to PDF - table and graph. Other freeware needed for ytem operation: databae erver MySQL For databae viewing by other uer at the network it i neceary to buy proper number of licence of SWR010 Databae Viewer. E.g. data acquiition from temperature humidity preure enor Tx41x, Hx43x. Input i deigned for reading from device upporting protocol ModBu RTU or Advantech. Signal i connected to MS6 terminal right from terminal for channel 15 and 16. Input can work wit up to 16 device. Maximum peed Bd. Galvanically iolated. Monitor ing yt em Acceorie for data logger mounting: MP013 Univeral metal wall holder for data logger wall mounting. Package contain a pair of holder and 4 crew. MP012 Holder for data logger mounting to DIN 35mm rail. Package contain the holder and 6 crew. MP041 Only for data logger MS6R. Four rubber feet with creew for dektop ue of data logger MS6R. 33

6 Monitoring ytem MSx - optional acceorie Power upplie: A1759 Univeral ac/dc adapter 230V-50Hz/21Vdc/1A. A1940 Univeral ac/dc adapter 230V-50Hz/24Vdc/1A/24W for ocket plug-in, witchmode. Monitoring ytem A5948 Power upply 230V-50Hz/24Vdc/2,5A for DIN rail 35mm, dual terminal 24Vdc, witch-mode, including DIN rail of 100mm length. Backup power upplie: A6963 upply A7963 battery Backup power upply A6963, model MINI-DC-UPS/24DC/2 with batery A7963, model MINI-BAT/24DC/1.3AH, manufacturer Phoenix Contact. Power upply i deigned for mounting to 35mm DIN rail in data logger cae MP033 and MP034. It contain two module - UPS and battery. Power upply i delivered unintalled in original manufacturer packaging. Backup power upply i able to upply data logger ytem with 200 ma conumption at leat 3 hour, data logger ytem with 500 ma conumption at leat 2 hour, data logger ytem with 1A conumption at leat one hour. Dicharged accumulator are recharged to full capacity in approximately 3 hour. Sytem enable to inform uer on witch-over to battery operation. More detail are in Manual Appendixe. For mounting to MP033 or MP034 cae pleae order: 1pc A6963, 1pc A7963, 1pc MP035 rail. MP035 DIN rail 35mm of 226mm length with crew for mounting of A6963 power upply with A7963 batery to MP033 or MP034 cae. A6966 upply A7966 battery Backup power upply A6966, model AWZ224, manufacturer Pular p.j., Poland. To thi power upply it i neceary to buy two lead accumulator A V/7Ah in hermetical maintenance-free type of contruction, e.g. type ELNIKA 12V/7.2Ah. Power upply i deigned for mounting to vertical inflammable wall with ufficient air flow. It protection rate i IP20. It i not deigned for mounting to cloed witchboard. Thi backup power upply i able to upply data logger with tranmitter of current conumption 200mA for approximately 35 hour. Dicharged accumulator are recharged to full capacity in approximately 14 hour. Sytem enable to inform uer on witch-over to battery operation. More detail are in Manual Appendixe. Pleae order: 1pc A6966, 2pc A

7 Monitoring ytem MSx - optional acceorie Optional internal equipment: ETHERNET SMS port RS232 MP024 Only MS5x, data logger MS6x have SMS port included. Built-in independent SMS port for GSM modem connection for SMS reception and ending. Enable to receive information from data logger by mean of SMS meage - actual value, alarm, memory occupation and other - a a repone to SMS query from uer or in cae of alarm creation at data logger. Not neceary, if data logger i connected to the PC via GSM modem. MP025 Built-in LAN interface for online MS5x data logger connection to Ethernet (Internet) network. Communication via: SNMP, SOAP, www page. In cae of limit exceeding alarm i activated and warning or SNMP trap are ent to pecified addree. Only MS5x. External communication converter: MP042 Built-in LAN interface for online MS6D, MS6R data logger connection to Ethernet (Internet) network. In cae of limit exceeding alarm i activated and warning or SNMP trap are ent to pecified addree. Only MS6D, MS6R. MO021 Converter RS485/RS232 for erial port COMx at the PC ide, including ac/dc adapter and terminator T485. Monitor ing yt em MP022 MP023 Converter USB/RS485 for USB port at the PC ide, including terminator T485. Powered from computer USB interface. Converter Ethernet/RS485 including ac/dc adapter and terminator T485. Deigned for everal data logger conencted via RS485 network for connection to the computer via Ethernet. Acceorie for ALARM OUT output: MP026 External audio indication unit. Enable to ignal alarm tate acoutically at the location up to 50m from data logger. Audio unit i connected to data logger by a cable (not included). MP002 Telephone voice dialer for alarm reporting, ac/dc adapter included. Enable in ALARM OUT output activity to end voice report to elected telephone number. Voice dialer i connected to land line. Output relay module: MP018 Output relay module with interconnection cable. It contain 16 main relay 250V/8A with witching-over contact. Each relay can be controlled baed on alarm creation at different input channel accordingly to etting of uer program. Any relay can be aigned to any alarm at any input. Output relay are deigned for external device control (witching of heating, cooling, ventilation, ditant alarm etc.). It i neceary to order connection cable to data logger MP017, optionally other acceorie. 35

8 Monitoring ytem MSx - optional acceorie MP017 Connection cable for terminal with diplay and output relay module - cable length approximately 60cm. Longer cable length available - maximum 2m for relay module, maximum 50m for the terminal with diplay. MP019 Holder for relay module mounting to DIN 35mm rail. Package contain the holder and 6 platic rivet. MP020 DIN rail for relay module with elevated conole for mounting to the MP033, MP034 cae. Rail enable to raie the relay module enable to lead cable to data logger under the module. Terminal with diplay: Monitoring ytem MP016 Terminal with dual line alphanumerical LCD and control button and 32 alarm LED - for panel mounting or mounting to a cae lid. Identical function a built-in terminal of MS5D data logger. It i poible to build in with IP54 protection. Maximum cable length to data logger 50m. It i neceary to order the MP017 connection cable to data logger. MP017 MP017-5 Connection cable for terminal with diplay and output relay module - cable length approximately 60cm. Longer cable length available - maximum 2m for relay module, maximum 50m for the terminal with diplay. Connection cable for terminal with diplay - cable length 5m. MP Connection cable for terminal with diplay - cable length 10m. MP032 External terminal with dual line alphanumerical LCD, control button, 32 alarm LED and audio alarm indication. Built in a IP54 protection cae, including 2m cable with covered terminal. Identical function a built-in terminal of MS5D data logger. Maximum cable length to data logger 50m. GSM modem a nd acceorie: MP009 GSM modem WaveCom Fatrack Supreme, without acceorie. MP009/1 Antenna for GSM modem WaveCom Fatrack, right-angled. MP009/2 Communication cable for GSM modem Fatrack. MP009/3 Ac/dc adapter 230V/12V for GSM modem Fatrack. 36

9 Monitoring ytem MSx - optional acceorie Cover, cable and other acceorie: MP027 Cover of data logger terminal (pair). Deigned for aethetic covering of cable connected to terminal and connector. Magnetic fixing to data logger. MP007 USB connection cable A-B, 1,8m. Standard computer cable. Needed only for MS5, MS5D. With MS6D, MS6R USB cable i included. MP030 RS232 connector with terminal for RS232 interface connection by mean of terminal, not by D-Sub connector. Monitor ing yt e m MP031 Screwdriver for eay connection of cable to WAGO terminal. Aemblie in cae with higher IP protection: MP033 Cae with IP65 protection with wall holder and data logger holder - no cutout in the lid. Dimenion 270 x 570 x 140 mm. MP034 Data logger MS5 in IP54 protection cae with connected terminal with diplay built in the lid. Dimenion 270 x 570 x 140 mm. Comet temperature humidity preure enor are directly connectable to MS data logger. Alo complete monitoring ytem with data logger and enor are available. 37