G6K(U)-2F(P)-RF(-S, -T)
|
|
- Philip Craig
- 5 years ago
- Views:
Transcription
1 S, Surfacemounting Highfrequency elay Surfacemounting, 1HzBand/ 3HzBand, Miniature, DD, Highfrequency elay Superior highfrequency characteristics at 1 Hz, such as an isolation of db min. between contacts of the same polarity of db min. between contacts of different polarity with an insertion loss of. db max. Miniaturized to.3.9 mm L W H. ated power consumption of mw with high sensitivity Singleside stable and singlewinding latching models are available. Models with a smaller footprint S are available to help save space. models for 3Hz band join the lineup with a downsized footprint. New CB terminals models are available. ohs Compliant Model Number elay unction None: Singleside stable : Singlewinding latching. Number of poles/ Contact orm : pole/ DD c 3. erminal Shape : OutsideL surface mounting terminals : CB terminals Ordering Information 4. Special unction : Highfrequency compatible 5. erminal Shape None: Standard S: Small footprint : Compatible with 3 Hz Standard Models with Surfacemounting erminals Standard Specifications Application Examples Communications equipment Broadcasting and audiovisual equipment est & measurement equipment elay unction Enclosure rating Contact form Model ated coil voltage Minimum packing unit Singleside stable DD 3, 4.5, 5, 1, 4 VDC pcs/tray ully sealed Singlewinding latching c 3, 4.5, 5, 1, 4 VDC pcs/reel Board spacesaving model elay unction Enclosure rating Contact form Model ated coil voltage Minimum packing unit Singleside stable DD S 3, 4.5, 5, 1, 4 VDC pcs/tray ully sealed Singlewinding latching c S 3, 4.5, 5, 1, 4 VDC pcs/reel Compatible with 3 Hz elay unction Enclosure rating Contact form Model ated coil voltage Minimum packing unit Singleside stable DD 3, 4.5, 5, 1, 4 VDC pcs/tray ully sealed Singlewinding latching c 3, 4.5, 5, 1, 4 VDC pcs/reel CB terminals elay unction Enclosure rating Contact form Model ated coil voltage Minimum packing unit Singleside stable ully sealed DD c 3, 4.5, 5, 1, 4 VDC pcs/tube Note 1. When ordering, add the rated coil voltage to the model number. Example: DC3 ated coil voltage However, the notation of the coil voltage on the product case as well as on the packing will be marked VDC. Note. When ordering elays in tape packing, add "3" to the end of the model number. Example: 3 DC3 elays per reel: pcs for 3 Be sure since "" is not part of the relay model number, it is not marked on the relay case. When ordering tape packing, minimum order unit is 1 reel pcs 1 = pcs. Note 3. Surface mounting terminal SM standard models are shipped in moistureproof package. CB terminal standard types do not require moisture proof packaging and therefore shipped in nonmoistureproof package. 1
2 S, atings Coil: Singleside Stable S, Coil: Singlewinding Latching Models S, Note 1. he rated current and coil resistance are measured at a coil temperature of 3 C with a tolerance of ±%. Note. he operating characteristics are measured at a coil temperature of 3 C. Note 3. he maximum voltage is the highest voltage that can be imposed on the elay coil instantaneously. Contacts Item Item Load esistive load 15 VAC,.3 A ated load VDC, 1 A 1 Hz, 1 W * ated carry current 1 A Max. switching voltage 15 VAC or VDC Max. switching current 1A * his value is for a V.SW of 1. max. at the load. Characteristics ated current ma Coil resistance ated voltage 3 VDC VDC VDC 37 1 VDC 9.1 1,315 4 VDC 4. 5, Item ated current ma Coil resistance ated voltage 3 VDC VDC VDC 37 1 VDC 9.1 1,315 4 VDC 4. 5, Must operate voltage V Surfacemounting Highfrequency elay Must release voltage V % of rated voltage Maximum voltage V Highfrequency Characteristics *1 ower consumption mw % max. % min. 15% Approx. Must set voltage V Must reset voltage V % of rated voltage Maximum voltage V ower consumption mw 75% max. 75% max. 15% Approx. Model S Item requency 1Hz 1Hz 3Hz Between contacts of the same db min. db min. 18 db min. Isolation polarity Between contacts of different db min. db min. 5 db min. polarity Insertion loss. db max.. db max.. db max. V.SW 1. max. 1. max. 1.4 max. Maximum carry power 3W * Maximum switching power 1W * Note 1. he impedance of the measurement system is 5. Note. he above values are initial values. *1. Contact your OMON representative if the elay will be used in an application that requires high repeatability in highfrequency characteristics for the microload region. Such applications include testing and measurement equipment and AE applications. *. hese values are for a V.SW of 1. max. at the load. elay unction Singleside stable models Singlewinding latching models Item Model S, S, Contact resistance *1 m max. Operating set time * 3 ms max. approx. 1.4 ms 3 ms max. approx. 1. ms elease reset time * 3 ms max. approx. 1.3 ms 3 ms max. approx. 1. ms Minimum set/reset pulse time ms Insulation resistance *3 1, M min. at 5 VDC Between coil and contacts 75 VAC, 5/ Hz for 1 min Between contacts of Dielectric different polarity 75 VAC, 5/ Hz for 1 min strength Between contacts of the same polarity 75 VAC, 5/ Hz for 1 min Between ground and coil/contacts 5 VAC, 5/ Hz for 1 min Vibration Destruction to 55 to Hz,.5 mm single amplitude 5 mm double amplitude and 55 to 5 Hz, m/s resistance Malfunction to 55 to Hz, 1.5 mm single amplitude 3.3 mm double amplitude and 55 to 5 Hz, m/s Shock Destruction 1, m/s resistance Malfunction 75 m/s Durability Mechanical 5,, operations min. at a switching frequency of 3, operations/hour Electrical, operations min. at a switching frequency of 1, operations/hour Ambient operating temperature 4 C to 7 C with no icing or condensation Ambient operating humidity 5% to 85% Weight Approx..95 g Note. he above values are initial values. *1. he contact resistance was measured with ma at 1 VDC with a voltage drop method. *. Values in parentheses are actual values. *3. he insulation resistance was measured with a 5 VDC megohmmeter applied to the same parts as those used for checking the dielectric strength.
3 S, Engineering Data Surfacemounting Highfrequency elay Agile H 8753D Vector Network Analyzer H8753D 5Ω terminaltion Highfrequency Characteristics Highfrequency Isolation *1, * Isolation db 4 5 est subject: Number of elays: pcs Average value initial Characteristics Highfrequency Insertion Loss *1, * Insertion loss db.1..3 Average value initial est subject: Number of elays: pcs Characteristics eturn Loss, V.SW *1, * eturn loss db 4 5 est subject: Number of elays: 5 pcs eturn loss Average value initial 1.8 V S 1.7 W V.SW requency Hz S Isolation db 4 5 est subject: S Number of elays: pcs Average value initial S Insertion loss db.1..3 requency Hz Average value initial est subject: S Number of elays: pcs requency Hz S eturn loss db 4 5 est subject: S Number of elays: 5 pcs eturn loss Average value initial 1.8 V S 1.7 W V.SW 1. Isolation db requency Hz est subject: Number of elays: 5 pcs Average value initial requency Hz Insertion loss db est subject: Number of elays: 5 pcs requency Hz Average value initial requency Hz eturn loss db requency Hz est subject: Number of elays: 5 pcs eturn loss V.SW Average value initial. V S.4 W requency Hz
4 S, Surfacemounting Highfrequency elay Isolation db est subject: Number of elays: 5 pcs 4 5 Average value initial Insertion loss db est subject: Number of elays: 5 pcs Average value initial eturn loss db 4 5 est subject: Number of elays: 5 pcs V.SW eturn loss Average value initial 1.8 V S 1.7 W requency Hz requency Hz requency Hz Note. efer to the specifications for basic specifications not shown above. *1. Ambient temperature condition: 3 C *. he highfrequency characteristics depend on the mounting board. Be sure to check operation including durability in actual equipment before use. Dimensions nit: mm Standard Specifications Mounting Dimensions op View olerance: ±.1 mm erminal Arrangement/ Internal Connections op View S + Note 1. Each value has a tolerance of ±.3 mm. Note. he coplanarity of the terminals is.15 mm max Note: Check carefully the coil polarity of the elay. Board spacesaving model S.85 S S VDC JAAN Mounting Dimensions op View olerance: ±.1 mm erminal Arrangement/ Internal Connections op View S S S + Note 1. Each value has a tolerance of ±.3 mm. Note. he coplanarity of the terminals is.15 mm max Note: Check carefully the coil polarity of the elay. 4
5 S, Surfacemounting Highfrequency elay Compatible with 3 Hz 1VDC CB terminals VDC JAAN Note 1. Each value has a tolerance of ±.3 mm. Note. he coplanarity of the terminals is.15 mm max. Note 3. he board dimensions are the dimensions that were used to measure the highfrequency characteristics given in the engineering data. he highfrequency characteristics and soldering conditions will depend on the type of board that is actually used. Always confirm applicability with the actual equipment before you use the elay. 5.5 max Mounting Dimensions op View olerance: ±.1 mm CB information Layer Structure: L inished hickness:. mm Copper hickness: 18 µm CB Mounting Holes Bottom View olerance: ±.1 mm erminal Arrangement/ Internal Connections op View S Note: Check carefully the coil polarity of the elay. welve,.85dia. holes erminal Arrangement/ Internal Connections Bottom View Note: Check carefully the coil polarity of the elay. Note. Each value has a tolerance of ±.3 mm. 5
6 S, ube acking and ape acking Specifications Surfacemounting Highfrequency elay Surface mounting terminal SM standard models are shipped in moistureproof package, and CB terminal standard types do not require moisture proof packaging and therefore shipped in nonmoistureproof package. lease refer to "Correct se" for handling after opening moistureproof packaging for Surface mounting terminal SM models. 1 ube acking in tube packing are arranged so that the 3. Carrier ape Dimensions 5.9±.1 orientation mark of each elay in on the left side. ifty elays 1±1. are packed on one tube. Be sure not to make mistakes in elay orientation when 4± dia. ±.1 A B 1.75±.1.4± ±.1 mounting the elay to the CB. Stopper green Orientation of elays ube length: 5 mm stopper not included No. of elays per tube: pcs ape acking Surface Mounting erminal Models Add 3 to the end of the model number to order elays in tape packing. If 3 is not added, the elays will be provided in tray packing. elays per reel: pcs Minimun ordering unit:1 reel relays 1. Direction of elay Insertion Carrier tape op tape cover tape Embossed tape Stopper gray S A 3 1 1±.1 4.5±.1 8.5±.1 B AA Cross Section 4± dia. ±.1 A B 1.75±.1 A 3 max. 9.±.1 B 11.5±.1 AA Cross Section 4±. 4± ± ±.1 BB Cross Section.4± ±.1 3 max. 5.9±.1 BB Cross Section ulling Direction S ulling direction ulling direction. eel Dimensions 9.5±1 5.5± 13±. dia. ± 1±.8 dia. A 3 1 Enlarged View of Section A
7 S, S, ecommended Soldering Method ecommended Conditions for IS Method Surfacemounting erminals 1 IS Method Mounting Solder: Lead emperature C ~ 45 1~ Soldering Surfacemounting Highfrequency elay he thickness of cream solder to be applied should be between and 5 m and the land pattern should be based on OMON s recommended CB pattern. o maintain the correct soldering joint shown in the following diagram, we recommend applying solder with the soldering conditions shown on the left. Correct Soldering elay erminal Incorrect Soldering 15 reheating Heel fillet is formed Land CB Solder Insufficient amount of solder Excessive amount of solder 9~ ~ ime s he temperature profile indicates the temperature on the circuit board sur IS Method Mounting Solder: Leadfree Check the soldering in the actual mounting conditions before use. emperature C 5 max reheating Case top panel peak: 55 C max. Soldering elay terminal section max. max. ime s he temperature profile indicates the temperature on the CB. 7
8 S, Safety recautions Surfacemounting Highfrequency elay or general precautions on CB elays, refer to the precautions provided in eneral Information of the elay roduct Data Book. Correct se elay Handling se the elay as soon as possible after opening the moistureproof package. As a guideline, use the elay within one week at C or less and % H or less. If the elay is left for a long time after opening the moistureproof package, the appearance may suffer and seal failure may occur after the solder mounting process. o store the elay after opening the moistureproof package, place it into the original package and seal the package with adhesive tape. When washing the product after soldering the elay to a CB, use a waterbased solvent or alcoholbased solvent and keep the solvent temperature to less than 4 C. Do not put the elay in a cold cleaning bath immediately after soldering. Environmental Conditions for sage, Storage, and ransport Avoid direct sunlight when using, storing, or transporting the elay and maintain normal temperature, humidity, and pressure conditions. Longterm, Continuous ON Contacts sing the elay in a circuit where the elay will be ON continuously for long periods rather than switching can lead to unstable contacts because the heat generated by the coil itself will affect the insulation and can cause a film to develop on the contact surfaces. We recommend using a latching relay magneticholding relay in this kind of circuit. If a singleside stable model must be used in this kind of circuit, we recommend adding failsafe circuits in case the contact fails or the coil burns out. Claw Securing orce During Automatic Mounting During automatic insertion of elays, be sure to set the securing force of each claw to the following so that the elay s characteristics will be maintained. A C B Direction A: 1.9 N max. Direction B: 4.9 N max. Direction C: 1.9 N max. Coating Do not use silicone coating to coat the elay when it is mounted to the CB. Do not wash the CB after the elay is mounted using detergent containing silicone. Otherwise, the detergent may remain on the surface of the elay. epeatability Contact your OMON representative if the elay will be used in an application that requires high repeatability in highfrequency characteristics for the microload region. Such applications include testing and measurement equipment and AE applications. About use of an IC socket. or: When using IC sockets, select IC sockets by confirming that the sockets ated/spec./characteristics are within the range of using condition. Also, confirm whether there is any problem of electric capability or plug insertion or not with actual using condition. Others or: he dotted line below on the surface of relay is connected with a metal case ground. So confirm the actual influence of insulation and signal characteristics when designing. round terminal he dotted line is connected with a ground terminal. Metal case Secure the claws to the shaded area. Do not attach them to the center of the elay or just one part of the elay. Metal case Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. Consult your OMON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. OMON Corporation Electronic and Mechanical Components Company Contact: Cat. No. 4E7 17O 8 Note: Do not use this document to operate the nit.
7. Approved Standards US: UL, CSA UL: FILE No.E CSA: FILE No.LR31928) 8. Special Function None : Standard U : For ultrasonically cleanable
Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW (Rated power consumption: mw) pickup coil power. Impulse withstand of 1,V ( 1 μs) meets FCC requirements. Stick packing employed
More information5. Terminal Shape P: PCB Terminals 6. Classification None : Standard ST : Stand-off 0.64 mm 15 : High-sensitivity (150 mw) Low-sensitivity
World's tandard Model! Resistant to electromagnetic interference, enables high-density mounting. Impulse withstand voltage of 1,5V meets FCC requirements. old-clad twin-contacts provide short contact bounce
More informationD3SH. List of Models. Surface Mount Switch S H SPST-NO SPST-NC. Long Lever Models. Standard Lever Models
D urface Mount witch The smallest detection switch in the world. Ideal for miniature mobile devices (OMRON's data as of eptember 2007) Ultra small size and ultra low profile contributing to down-sizing
More informationD3SK. The smallest detection switch in the industry with high precision operation. ( mm (W D H)) List of Models. Surface Mount Switch
The smallest detection switch in the industry with high precision operation. (OMRON's data as of pril 2008) (.0.5 0.9 mm (W H)) Ultra small size and ultra low profile contributing to down-sizing of sets
More informationSS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept
Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept One-piece terminal construction to keep out flux. A single leaf movable spring construction.
More informationSolder terminals D2FD-2L0-1H D2FD-01L0-1H. PCB terminals D2FD-2L0-1T D2FD-01L0-1T. Hinge lever Solder terminals D2FD-2L1-1H D2FD-01L1-1H
Ultra subminiature and dust proof Sealing by using rubber packing means the switch can be used in dust-proof environments (IEC IP6X). Switch rating of 2 A at 125 VAC possible with a single-leaf movable
More informationElectroformed Probe Pin
New Product News Electroformed Probe Pins XP3B Highly eliable Electroformed Probe Pins. Outer spring type. Plunger structure to ensure stable contact. High durability due to the smooth end surfaces achieved
More information2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays
.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available
More informationD2F. Ultra Subminiature Basic Switch with plenty of terminal variations. Model Number Legend. Ultra Subminiature Basic Switch
Ultra Subminiature Basic Switch with plenty of terminal variations Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability. Using insertion molded terminals
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationLong seller backed by product variety and high reliability
Long seller backed by product variety and high reliability DS RELAYS RoHS compliant FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c and 2c all have the same height (9.8
More informationXC7. DIN Sequence Connectors. An improved DIN-standard Sequence. Connectors. connectors. Ratings and Characteristics. Materials and Finish
DIN Sequence Connectors XC7 An improved DIN-standard Sequence Connector ows power line to daughter board connection first and removal last. Used the same way as regular DIN connectors. Dimensions are those
More informationXC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
More informationE2K-F. Flat Capacitive Sensor with a Thickness of Only 10 mm. Flat Proximity Sensor. Ordering Information. Sensors [Refer to Dimensions on page 4.
Flat Proximity Sensor EK-F CSM_EK-F_DS_E Flat Capacitive Sensor with a Thickness of Only mm Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only mm thick.) Direct mounting
More informationXH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
More informationHIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY
HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ FEATURES 1. Breakthrough height of 9.8 mm.386
More informationG9H. Ordering Information. Hybrid Power Relay. List of Model. Accessories (Order Separately) Connecting Socket Mounting Plate
Hybrid Power elay CSM DS_E_6_ Hybridization of a Magnetic elay and an SS Achieves 0-A Switching for 0 Million Operations. UL/CSA certified (-US models). Using a triac to open and close the circuit reduces
More informationHIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY
HIGHLY SENSITIVE 15 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c, 2c, and 4c all have the same height (9.8
More informationLong seller backed by product variety and high reliability
Long seller backed by product variety and high reliability DS RELAYS Compliance with RoHS Directive FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c and 2c all have the
More informationE2K-X4ME1 2M E2K-X4ME2 2M
Cylindrical Proximity Sensor EK- CSM_EK-_DS_E 1 General-purpose Threaded Sensor That Detects Metals and Non-metals Alike Detects both metallic and nonmetallic objects (water, oil, glass, plastic, etc.).
More informationLeading the market, our 5 mm 2-pole surface mount relays comply with JIS C0806
Leading the market, our 5 mm -pole surface mount relays comply with JIS C86 TQ TQ RELAYS Compliance with RoHS Directive FEATURES 1. Flat compact size 14.(L) 9.(W) 5.(H).551(L).354(W).197(H). : High sensitivity
More informationDIP Switch (Slide Type)
DIP Switch (Slide Type) Low-cost DIP Switch with Slide Pins Designed to DIP (Dual Inline ) standards and allows automatic mounting with IC insertion machines. Washable with seal tape available. SMT (surface-mounted
More informationModel Number Structure
Solid State Relays G3@-VD CSM_G3F_G3FD_DS_E_4_2 International Standards for G3F Series, Same Profile as MY Power Relays Shape-compatible with mechanical relays. Certified by UL, CSA, and VDE (model numbers
More information1 Form A 8A/16A, Small Polarized Power Relays (latching type)
8A/16A, Small Polarized Power Relays (latching type) DW RELAYS (ADW1) New Low profile type (Inrush type) FEATURES 1. Low profile type available (h = 15.8 mm.622 inch) 2. Inrush type available (TV-8 UL/C-UL
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. TESTING LOW PROFILE 2 FORM C RELAY TQ RELAYS 9.354 26.7 +.4 1.51 5.2 +.16.8
More informationSolid-state Timer. Ordering Information. Miniature Timer with Multiple Time Ranges and Multiple Operating Modes H3YN- - Accessories (Order Separately)
Solid-state Timer Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
More informationXH5 SMT-compatible Connectors with a 1.27-mm Pitch
New Product Half-pitch SMT Connectors (oard to oard and oard to Cable Connectors) XH5 SMT-compatible Connectors with a -mm Pitch These SMT Connectors can be mounted on the back surfaces of circuit boards.
More informationSPST-NO SPDT DPST-NO DPDT
Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508
More informationEE-SX97 40% Built-in connector enables downsizing and easier connection. Protective circuit for safe operation. Slot-type Photomicrosensor.
Slot-type Photomicrosensor EE-SX CSM_EE-SX_DS_E Built-in connector enables downsizing and easier connection. Protective circuit for safe operation. A built-in connector minimizes the shape and dimensional
More informationA16. Separate Construction with Cylindrical 16-dia. Body. Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.
Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.) Separate Construction with Cylindrical 16-dia. Body Miniature design of 28.5 mm, the smallest class in the industry. Detachable
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
More informationG3S4-A 5 VDC 12 VDC 24 VDC 0.6 A at 75 to 264 VAC (See note 1.) G3S4-A1 5 VDC 12 VDC 24 VDC Yes G3SD-Z01P-PD 1 A at 3 to 26 VDC (See note 2.
Terminal SSR G3S CSM_G3S_DS_E_7_ Compact Terminal SSR with Outputs Easy-to-use SSR block that combines four compact G3S SSRs, sockets, and heat sink in one unit. Easy wiring with separate I/O terminal
More informationE2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
Chip-immune Inductive EEZ CSM_EEZ_DS_E Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s also
More informationSolid-state Timer H3YN
Solid-state Timer H3YN Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
More informationModel Number Structure
Analogue Temperature Controller E5C2 DIN-sized (48 x 48 mm) Temperature Controller with Analog Setting Compact, low-cost Temperature Controller. Incorporates proportional control and reset adjustment function.
More informationD5B. Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics. Mechanical Touch Switch. Model Number Structure
Mechanical Touch Switch D5B CSM_D5B_DS_E_3_2 Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics Slow-action switching mechanism used. Gold-plated contact with coil spring
More informationG9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure
Safety Relay Unit G9 CSM_G9_DS_E The G9 Series Offers a Complete Line-up of Compact Units. Four kinds of -mm wide Units are available: A -pole model, a -pole model, and models with poles and OFF-delay
More informationModel Number Structure
Temperature Controller CSM DS_E_5_1 DIN-sized (48 x 48 mm) Temperature Controller with Analog Setting Compact, low-cost Temperature Controller. Incorporates proportional control and reset adjustment function.
More information(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)
Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay
More informationContact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)
D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger
More informationOutput configuration Contact form Operation indicator Cable length Model PNP open collector. 1 m D5F-2B10 (+ common) ON when operated
High-precision Optical Switch D5F CSM_D5F_DS_E_2_2 Optical System Achieves 1-μm Operating Position Repeatability in this 4-way Switch No-contact structure for high reliability. Ceramic materials in measuring
More informationWA OPTICAL SWITCHES (AWAP)
Compactness and High Reliability Realized with Unique Polarized Actuator Construction Non-latching Type Also Available WA OPTICAL SWITCHES (AWAP) RoHS compliant ORDERING INFORMATION FEATURES. Small size,
More information(75 to 264 VAC) 12 VDC 24 VDC No 5 VDC G3MC-202PL 12 VDC 24 VDC
Solid State Relay G3MC Compact, Thin-profile, Low-cost SSR with Reinforced Insulation Small bottom surface area (approx. 80% of the conventional G3MB s), ideal for close PCB mounting. DC input and AC output
More informationTop-actuated (B3U-1000 Series)
Ultra-small Tactile Switch BU Ultra-small-sized Tactile Switch with High Contact Reliability: 1.2 x x 2.5 mm (H x W x D) Industry s smallest switch* allows high-density mounting on PCBs for mobile equipment.
More informationSolid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
More informationShape Model Measurement range Model Straight 50 to 300 mm. Straight 70 to 800 mm
Digital Amplifier Ultrasonic Sensor CSM DS_E_1_1 A Reflective Sensor That Handles All Types of Sensing Object Colors and Patterns Compact with a Broad Selection of Side-view Heads Slim with analog outputs
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationPRODUCT SPECIFICATION. PC Board Relays. Series.
PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7
More informationAluminum-detecting Proximity Sensor (Separate Amplifier Type)
Aluminum-detecting Proximity Sensor (Separate Amplifier Type) ECY Simple Teaching Function for Simple Adjustment. Easy-to-see Excess Gain Level Indicators. Detects aluminum, copper, and other non-ferrous
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
More informationModel Number Structure
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid State Relays G3 @-VD CSM_G3F_G3FD_DS_E_2_1
More informationSetting method Indication Control Output Model method mode Thermocouple (with sensor burnout detection circuit)
Temperature Controller DIN-sized (48 x 48 mm) Temperature Controller With Digital Setting Compact, low-cost Temperature Controller Incorporates proportional adjustment and reset adjustment function. Incorporates
More informationE2EC. High-sensitivity DC 2-Wire Sensors and Subminiature Sensors with Long-distance Detection. Cable Amplifier Proximity Sensor. Ordering Information
Cable Amplifier Proximity Sensor EEC CSM_EEC_DS_E High-sensitivity DC -Wire Sensors and Subminiature Sensors with Long-distance Detection Shielded Sensor Heads from -mm to M diameters that can be embedded
More informationTerminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
More informationMain contacts Auxiliary contact Number of input channels Rated voltage Model Category 24 VAC/VDC 3PST-NO SPST-NC 1 channel or 2 channels possible
Safety Relay Unit Four kinds of -mm wide Units are available: A -safety contact model, a -safety contact model, and models with safety contacts and OFF-delay safety contacts. Also available are 7.-mm wide
More informationContact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect
VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant
More informationAZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
More information16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
More informationQuick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
More informationMini Photoelectric Sensor
Mini Photoelectric Sensor High cost-performance Mini Photoelectric Sensor Saves Installation Space and Wiring Effort and Detects Minute Sensing Objects Pin-point beam (1 to 2-mm dia.) makes it possible
More informationNPN output. 200 mm. Type Cable length Model Remarks
Retroreflective Photomicrosensor with Lens CSM DS_E_5_2 Photomicrosensor with light modulation for reduced external light interference. Easy adjustment and optical axis monitoring with a light indicator.
More informationTime-limit operation/ self-resetting DPDT --- H3M H3M with Y92F-40 adapter SPDT SPDT H3M-H H3M-H with Y92F-40 adapter
Solid-state Timer Solid-state Timer with Variable Time Ranges Four time ranges are selectable per timer unit. Wide timing range of 0.05 second to 30 hours can be covered by a combination of five timer
More informationSolid-state Timer H3FA. Model Number Structure. DIP Model Timer for PC Board Use Provides Contact and Solid-state Output
Solid-state Timer H3FA Please read and understand this catalog before purchasing the products. Please consult OMRON representative if you have any questions or comments. Refer to Warranty and Application
More information4 mm. 8 mm. Proximity Sensor. Sensing head Sensing distance Output configuration Part Number M18 Shielded 4 mm DC 3-wire PNP-NO E2EZ-X4B1 M30
Sensing distance Supply voltage Output 4 mm 8 mm 12 to 24 VDC 100 to 220 VAC 200 ma max. 100 ma max. Proximity Sensor Detects Objects without Being Influenced by Aluminum and Cast Iron Cut Chips Sense
More informationSolid-state Timer. Ordering Information. Ultra-slim Timer for G2R Relay Socket. H3RN-jj. Accessories (Order Separately) Connecting Socket
Solid-state Timer Ultra-slim Timer for G2R Relay Socket Pin configuration compatible with G2R Relay and mounts to the P2R/P2RF Socket. Standard multiple time ranges and multiple operating modes. Conforms
More informationSignal Relays AXICOM. P1 Relay V23026
P1 Relay V23026 n Directly triggerable with TTL standard modules as ALS, HCT & ACT n Slim line 13.5x7.85mm (0.531x0.309 ) n Switching current 1 A n Bifurcated 1 form C (CO) contact n Immersion cleanable
More informationModel NPN output PNP output Standard. configuration
Slot-type Photomicrosensor (Non-modulated) *1 EE-SX4/6 CSM_EE-SX4_6_DS_E 1 Global Standard Slot-type photomicrosensors with 0- to 100-mA direct switching capacity. Series includes models that enable switching
More informationMOS FET Relay. Ordering Information. Application Examples G3VM- XN(F)/4N(F)
MOS FET Relay G3VM- XN(F)/4N(F) SSR for Switching Analog Signals, with an I/O Dielectric Strength of 2.5 kvac Using Optical Isolation Switches minute analog signals. Linear voltage and current characteristics.
More informationModel Number Structure
Solid State Relays with Failure Detection Function Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal.
More informationLight ON 5m. * Light ON. 2.5m (3m) Light ON. (5m)
All voltage photoelectric sensors Built-in amplifier accepts wide supply voltage range. Slim, space-saving construction measures only x x 7.4 mm. s with long life expectancy and high switching capacity
More informationE4PA-N. Application Examples. Features. Ultrasonic Displacement Sensor. Now, more advanced with a new mutual interference prevention function.
Ultrasonic Displacement Sensor Now, more advanced with a new mutual interference prevention function. Application Examples Detecting slackness in sheet materials Detecting liquid levels Remotely detecting
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More informationG3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
More informationG9SA. Ordering Information. Safety Relay Unit. The G9SA Series Offers a Complete Line of Compact Units. H Several types of 45-mm wide Units are
Safety Relay Unit The G9SA Series Offers a Complete Line of Compact Units H Several types of -mm wide Units are available: a -pole model, a -pole model, models with poles and OFF-delay poles H 7.-mm wide
More informationCylindrical Proximity Sensor
Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition
More informationOrigin Position Control of an X-Y Table Coaxiality Inspection Checking Turret Indexing Position D5A
High-precision Switch CSM DS_E_2_2 High-precision Switch for Detecting Micron-unit Displacement Ideal for detecting and measuring wear of cutting tools or for original point of work. Ceramic plungers on
More informationBGS (at min. setting) BGS (at max. setting)
Compact Photoelectric Sensor with Built-in Amplifier EZ-LS CSM_EZ-LS_DS_E_7_ Distance-settable Sensor Unaffected by Workpiece Color and Background Distance-settable triangulation model unaffected by color.
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More informationLong Sensing-distance Capacitive Separate Amplifier Proximity Sensor E2J-W10MA 1M E2J-W20MA 1M. E2J-JC4A Amplifier Unit
Long Sensing-distance Capacitive Separate Amplifier Proximity Sensor Flat Capacitive Sensor with Separate Amplifier Ideal for Mounting on Robot Hands. Flat head is only 5.5-mm thick. Robotics cable ensures
More informationProximity Sensor Ideal for High Temperatures and Cleaning Processes. Applicable to 120 C
Proximity Ideal for High Temperatures and Cleaning Processes EEH CSM_EEH_DS_E Proximity Ideal for the Food and Beverage Industry SUS6L Body, IP69K Protection, Resistant to High Temperatures and Detergents
More informationModel Number Structure
Solid State Relays CSM DS_E_3_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
More informationMINI-ISO AUTOMOTIVE RELAY
MINI-ISO AUTOMOTIVE RELAY CB RELAYS RoHS compliant FEATURES This relay has an Mini-ISO (International Organization for Standardization) terminal arrangement. Relay is compact and high capacity (4 A). Compact
More informationOrdering Information. Door Interlock Switch D2D. Power Switch with Minimum Contact Gap up to 3 mm. D2D - 0. Model Number Legend
Door Interlock Switch D2D Power Switch with Minimum Contact Gap up to 3 mm. Minimum contact gap of 3 mm (standard models), needed in general power switches, is provided. Mechanism with double return spring
More informationModel Number Structure
Solid State Relays CSM DS_E_2_1 I/O SSRs That Mount to OMRON s G7TC I/O Block Input and output modules are available in wide variety. Snaps easily into P7TF I/O Terminals and can be used together with
More informationOperation mode. Output configuration. Relay DC SSR. Light-ON Dark-ON (switch selectable) Relay DC SSR. Relay DC SSR
Built-in Power Supply Photoelectric Sensor CSM DS_E_12_3 Model Contribute to Overall Cost Reduction erminal Block Models Easy to wire and adjust. For the most recent information on models that have been
More informationImprovement of placement effi ciency Placement effi ciency of Chip Resistor Array is two, four or eight times of the fl at type chip resistor
Chip Resistor Array ype: EX1 : 001 Array EX : 00 Array EX3 : 0603 Array EXN: 00 Array EX : 0603 Array EXS : 005 Array Features High density resistors in 0. mm 0.6 mm size (EX1) resistors in 1. mm 0.6 mm
More informationonlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
More informationTIMERS FOR ALL APPLICATIONS
Fuji 1/1 DIN Super imers Overview IMERS FOR ALL APPLICAIONS AutomationDirect now offers solid-state timers brought to you by two leaders in the industry, FUJI and Koyo. FUJI Electric has been in business
More informationDPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2
Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering
More informationSafety Monitoring Relays
Safety Monitoring Relays G9SA G9SA Safety Relay Unit Four kinds of 45-mm wide units are available: A 3-pole model, a 5-pole model, and models with 3 poles and 2 OFF-delay poles, as well as a two-hand controller.
More informationTransistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
More informationSafety Relay Unit (I/O Unit Type)
Safety Relay Unit (I/O Unit Type) CQM1-SF200/ CS1W-SF200 Same Dimensions as I/O Unit Less Installation Space and Wiring Required Safety Relay Unit that can be used as an I/O Unit for OMRON s CQM1H and
More informationModel Number Structure
Thumbwheel Switch Refer to Warranty and Application Considerations (page 1) and Safety Precautions (page 3). General-purpose Thumbwheel Switches A wide range of output codes are available. Use the back-mounting
More informationE2K-F. Flat Capacitive Sensor with a Thickness of Only 10 mm. Flat Proximity Sensor. Ordering Information. Sensors [Refer to Dimensions on page 4.
Flat Proximity Sensor EK-F CSM_EK-F_DS_E Flat Capacitive Sensor with a Thickness of Only mm Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only mm thick.) Direct mounting
More informationCable specifications PVC
IO-Link Proximity Sensor (Spatter-resistant Models) EEQ-@-IL@ IO-Link Makes Sensor Level Information Visible and Solves the hree Major Issues at Manufacturing Sites! A Proximity Sensor hat Can Be Used
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More informationActuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
More informationD2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
More informationZ-15GW2277 Z-15GW2277-B
Basic Switch GENERAL PURPOSE General Purpose Basic Switch High precision basic switch in a variety of styles Wide margins of operating conditions increase the operating speed range Available in general
More information