Paper Title Last Name First Name Session A Comparison of Two Inter-Laboratory Measurement Comparison Method
|
|
- Caitlin Potter
- 5 years ago
- Views:
Transcription
1 Paper Title Last Name First Name Session Company A Comparison of Two Inter-Laboratory Measurement Comparison Method Nicholas Ricardo III-D The Boeing Company A High Precision And Fast Ultrasonic System For Huang C.F. VI-C Indoor Temperature Measurements A High Precision Ultrasonic System For The Huang C.F. VI-C Ultrasound's Velocity Measurements A Laser Non-Contact Measurement of Static Positioning and Dynamic Contouring Accuracy of a Wang Charles III-A Optodyne CNC Machine Tool A New Method For Automated Calibration Of Low Pressure Transfer Standards Haines Robert V-A DH Instruments A Standardized Laser Tracker Calibration System Sawyer Daniel II-A NIST Absolute Area Measurements of Circular Radiometric Apertures Litorja Maritoni I-D NIST An Approach for the Analysis of Interlaboratory Evaluations Based on the ISO Guide to the Kacker Raghu I-D 90 Expression of Uncertainty in Measurement An Introduction of Measurement technology in Physiology Research Application-The Design of a Vibration Sensor for Animal Behavior Li Yan-Chay II-C I-Shou Measurements Analysis Of Mass Measurement Data To Investigate Between-Time Component Of Error Schoonover Randall IV-A Application and Calibration of Virtual Test Instruments Tailored to Navy Metrology Requirements Walden Jeff III-B NSWC Corona
2 Applying Laser Metrology Systems for Machine Tool and CMM Error Mapping and Compensation Ma Quan II-A Automated Precision Balance Repeatability and Reproducibility Effects Westinghouse Savannah Schull Harper IV-A on Measurement Uncertainty River Company Basic Dynamical Modeling of Expanding Volume Flow Calibrators Maginnis Tom IV-B Kinetics Calibration Intervals - New Models and Techniques Jackson Dennis II-D NSWC Corona Components of a Quality Calibration for Pipettes & Bonnell Other Volumetric Instruments Kenneth V-C Henry Troemner, LLC Consumer Risk for Non-Gaussian Measurand Distributions Nicholas Ricardo III-D The Boeing Company Coordinate Measuring Machine Probes For Measuring Small Structures Stone Jack I-A NIST Deformation Corrections in Gage Block Calibration Doiron Ted I-A NIST Design The Strategy For Diameter Measurement of New South Pumhirun Nalin II-A Using Coordinate Measuring Machine Wales, School of Manufacturing and Mechanical Engineering Doppler Global Velocimetry (DGV): A Whole Field Technique for Flow Research and its Capabilities Dopheide Dietrich VI-B PTB for Flowrate Measurements Error Mapping and Calibration of Laser Tracker Systems Lau Kam II-A Automated Precision Errors on the Bench Top - Uncertainty and Bias of Rodriguez Pipettes in the Working Laboratory George IV-C Artel
3 Evaluation of a Non-Contact Thread Measurement Stanfield System Eric III-A NIST Flow Measurement Key Comparisons: Statistical Design and Analysis Bases for Multiple-Meter Mattingly George IV-B NIST Transfer Standards Further Analysis Of Ball Pressure Gage Calibration Data By The Development Of Linear And Quadratic Jones Frank V-A NIST (retired) Equations Gravimetric & Spectrophotometric Errors Impact Westinghouse Savannah Clark John P. V-C On Pipette Calibration Certainty River Company Guiding your Organization through Laboratory Accreditation, A Technical Manager s Experience Cenker Greg I-B Fluke Electronics History of the World Wide Web Gonzalez David II-B NSWC Corona Implementing XML Technology for Metrology? A Case Study Gonzalez David II-B NSWC Corona Improvements in NIST's Optical Technology Division Measurements and Services Bruce Sally III-C NIST Improving the Efficiency of Multifunction Calibrator Morton Calibration Systems John I-C Fluke Electronics Integrated Manual and Automated XML Calibration Cunavelis Procedure Development Michael II-B NSWC Corona Maintaining Traceability of Flow Measurement Standards Kegel Tom IV-B CEESI NCSLi Interlaboratory Comparison Measurement Protocol for UV Irradiance Larason Thomas III-C NIST NIST Standard Casings Project Song John VI-C NIST
4 Power Quality Measurement Coombes David I-C Recommended Guide for Determining and Reporting Uncertainties for Balances and Scales Rental Companies: How Can They Help You? Results Of The SIM 1-Litre Volume Comparison. Sector-Specific Accreditation Requirements Special Topics in Uncertainty Calculation Static Volume Calibration and Uncertainty by Gravimetric Method Miller Val IV-A NIST Fluke Precision Measurement Ltd. Jenson Cory VI-D Technology Rentals and Services Elsayed Mohamed V-D NIST Franklin Chet I-B DynCorp Stein Philip IV-D Stein Consultants Hazariam Emil IV-C LA County Weights and Measures Department Sub-Pixel Limitation of Imaging Sensor Mufti Asif III-A Systematic Uncertainties of Calculated Diffraction Corrections Educacion y Entrenamiento de Metrologia The Accuracy and Versatility of the NIST M48 Coordinate Measuring Machine The Effectiveness of Artifact Calibration in Computing Internal Resistance Values The EUROMET Future Flow Testing Plans The First UK National Standard Static Torque Calibration Machine New Design Concepts Lead The Way Shirley Eric I-D NIST Selzer Paul VI-D Braun Stoup Martson John I-A NIST David I-C Fluke Electronics Dopheide Dietrich V-B PTB Davis Francis V-A NPL
5 The New CIPM Working Group for Fluid Flow (WGFF): Plans and Progress Mattingly George V-B NIST The New NIST Policy on Traceability Ehrlich Charles VI-D NIST The Ongoing Investigation Into The Accuracy Of Multiple Critical Flow Venturis Mounted In A Caron Richard IV-B Visteon Corporation Common Plenum The Role of Marketing and Customer Service Powell Greg VI-D The Signal Group The Standard Uncertainty of Photometric Volume Measurements Examples from the Dual Dye Ratio- Rodriguez George V-C Artel Metric Method The Theory and Operation of Optical Chilled Mirror General Eastern Soleyn Kenneth VI-A Hygrometers for Humidity Calibration Instruments Time Distribution Using the World Wide Web Novick Andrew III-B NIST Transducer Compensation Adjustment After Installation Anderson Karl II-C Valid Measurements Two-Layer Sensor Matrix and Data Acquisition System Design in Spatial Temperature and Liu Tang-Jen VI-A Humidity Measurement Uncertainty Analysis of a High-Speed Dry Piston Flow Prover Padden Harvey VI-B BIOS International Virtual Instrumentation for Metrology Applications Smith Greg III-B National Instruments XML Technology Today, Standardization, and Storage Benefits Taylor John II-B Software AG
Papers by Session. II-A Ma Quan Automated Precision
I-A Doiron I-A Stone I-A Stoup I-B Franklin I-B Cenker I-C Martson I-C Morton I-C Coombes I-D Kacker I-D Litorja I-D Shirley II-A Lau Ted NIST Deformation Corrections in Gage Block Calibration Jack NIST
More informationCalibration of Optical Rotary Tables using Autocollimators and Laser Interferometer Systems
Calibration of Optical Rotary Tables using Autocollimators and Laser Interferometer Systems Prof. S. Zahwi, Prof. M. Amer, National Institute for Standard, Egypt; Prof. M. A. Abdo, Al-Azhar University,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection
More informationUnderstanding MFC Metrology & Calibration
Understanding MFC Metrology & Calibration Factors Impacting MFC Performance in Biopharmaceutical Process Systems 1 Understanding MFC Metrology & Calibration Mass flow controllers (MFCs) precisely deliver
More informationJanuary/February 1995 March/April 1995 May/June 1995 July/August 1995 September/October 1995 November/December 1995 January/February 1996
January/February 1995 Accurate Traceable Power Calibration at High Frequencies Guest Editorial: Certifying the Certifier Streamlining the Documentation Process for ISO 9000 March/April 1995 The Josephson
More informationInc. FLO-CAL Liquid Calibration System FLO-CAL SOFTWARE FLEXIBLE DESIGN TO MEET YOUR LIQUID FLOW CALIBRATION REQUIREMENTS
FLEXIBLE DESIGN TO MEET YOUR LIQUID FLOW CALIBRATION REQUIREMENTS FLO-CAL A portable Liquid Flow Standard FLO-CAL INSTRUMENT Data acquisition and interface tool with flow meter frequency and analog signals.
More informationThe Virtual CMM a software tool for uncertainty evaluation practical application in an accredited calibration lab
The Virtual CMM a software tool for uncertainty evaluation practical application in an accredited calibration lab Michael Trenk *, Matthias Franke **, Dr. Heinrich Schwenke ** * FEINMESS GmbH&Co. KG **
More informationMeasurements in Fluid Mechanics
Measurements in Fluid Mechanics 13.1 Introduction The purpose of this chapter is to provide the reader with a basic introduction to the concepts and techniques applied by engineers who measure flow parameters
More information2015 APMP TC Initiative Project
015 APMP TC Initiative Project - Research on the Uncertainty Evaluation and Inter-comparison of 3D Pitot Tubes for Measuring Greenhouse Gas Emission Speaker: Chun-Min Su Participants: CMS: Hsin-Hung Lee,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection
More informationAxes 150 mm/s 150 mm/s. Y axis Z axis Vector 260 mm/s 260 mm/s. P in µm P in µm
ZEISS PRO / Specifications Version: May 2016 System description ZEISS PRO Models Operating mode Sensor mounts Software Horizontal-arm measuring machine on X-axis guide for flush-floor installation Horizontal-arm
More informationCalibration System for Thermo Hygrometers with Climatic Chamber
Calibration System for Thermo Hygrometers with Climatic Chamber Climatic chamber-based calibration system for big probes and classic instruments by direct comparison Climatic chamber and reference thermo
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Exploration Drive Aberdeen Science and Energy Park Aberdeen AB23 8HZ Contact: Mr Graham Robertson Tel: +44(0)1224 708500 Fax: +44(0)1224 772
More informationCOMPARISON OF ERROR MAPPING TECHNIQUES FOR COORDINATE MEASURING MACHINES USING THE PLATE METHOD AND LASER TRACER TECHNIQUE
I IMEKO World Congress Fundamental and Applied Metrology September 6, 9, Lisbon, Portugal COMPARISON OF ERROR MAPPING TECHNIQUES FOR COORDINATE MEASURING MACHINES USING THE PLATE METHOD AND LASER TRACER
More informationEllab Temperature Indicator
Ellab Temperature Indicator FDA compliant alternative to mercury-inglass thermometers for retort monitoring - and much more ETI Ellab Temperature Indicator The ETI is availble in three different configurations
More informationFlow Measurement Applications
Flow Measurement Applications ONICON has been a leading provider of the flow and energy measurement solutions required by the HVAC industry for the past 30 years. As the need for accurate and reliable
More informationAN EVALUATION OF NON-CONTACT LASER SCANNER PERFORMANCE USING CALIBRATED ARTIFACTS
AN EVALUATION OF NON-CONTACT LASER SCANNER PERFORMANCE USING CALIBRATED ARTIFACTS Michael Gomez, Colleen Vaccaro, Chase Maness, Connor Lawrence, Carson Murray, Luis Vargas, Greg Caskey, Chris Evans, and
More information[ Capture Hoods. What is a capture hood?
[ Capture Hoods 2 What is a capture hood? A capture hood (flow measuring hood) is an instrument used to measure volumetric air flows from supply or exhaust diffusers and grilles. The Alnor version of the
More informationPurpose of Today s Presentation
Metering, Monitoring, and Verification APPA Institute for Facilities Management February 6, 2014 Purpose of Today s Presentation To provide a broad understanding of: Metering installation and application
More informationREFERENCE GENERATOR FOR CALIBRATION OF HUMIDITY AND TEMPERATURE INSTRUMENTS
HUMIDITY AND TEMPERATURE CALIBRATOR REFERENCE GENERATOR FOR CALIBRATION OF HUMIDITY AND TEMPERATURE INSTRUMENTS BASED ON AIRCHIP DIGITAL TECHNOLOGY TRANSPORTABLE HUMIDITY AND TEMPERATURE CALIBRATION LABORATORY
More informationSTUDY OF FLOW PERFORMANCE OF A GLOBE VALVE AND DESIGN OPTIMISATION
Journal of Engineering Science and Technology Vol. 12, No. 9 (2017) 2403-2409 School of Engineering, Taylor s University STUDY OF FLOW PERFORMANCE OF A GLOBE VALVE AND DESIGN OPTIMISATION SREEKALA S. K.
More informationgood check of volumetric accuracy. However, if the mea error components. However, if the errors measured are large,
REVIEW OF SCIENTIFIC INSTRUMENTS VOLUME 71, NUMBER 10 OCTOBER 2000 Laser vector measurement technique for the determination and compensation of volumetric positioning errors. Part I: Basic theory Charles
More information1. Introduction 2. Specifications 3. Symbol Definition and Button Location 4. Operation Instructions 5. Temperature Measurement 6.
CONTENTS TITLE PAGE 1. Introduction.. 1 2. Specifications... 1 3. Symbol Definition and Button Location... 2 4. Operation Instructions.... 3 4.1 Power-Up...3 4.2 Connection of the Temperature Probe...
More informationPRODUCT BROCHURE DEA MICRO-HITE. Handy and Cost-Effective CMM
PRODUCT BROCHURE DEA MICRO-HITE Handy and Cost-Effective CMM DEA MICRO-HITE Micro-Hite, the line of small CMMs featuring excellent performance, is the result of the synergy among Hexagon Metrology companies
More informationCoordinate Measuring Machines with Computed Tomography
Always a Step Ahead with Quality Coordinate Measuring Machines with Computed Tomography Multisensor Coordinate Measuring Machines with Computed Tomography Computed Tomography in Coordinate Measuring Machines
More informationSPECIFICATION SHEET Electronic Force Proving Instrument (For verification of uni-axial testing machine) MODEL : FS-117F
Applications For calibrating Uni-axial testing machines, universal testing machines, Compression and Tensile testing machine as per IS:1878, ISO 7500 or any other international standards Suitable for metrology
More informationSWING ARM OPTICAL CMM
SWING ARM OPTICAL CMM Peng Su, Chang Jin Oh, Robert E. Parks, James H. Burge College of Optical Sciences University of Arizona, Tucson, AZ 85721 OVERVIEW The swing arm profilometer described in reference
More informationDTI-1000 and STS-100. Reference Digital Temperature Indicator
t e m p e r a t u r e Reference Digital Temperature Indicator DTI-1000 and STS-100 Wide temperature range DTI-1000: -200 to 750 C (-328 to 1382 F) STS-100: -150 to 650 C (-238 to 1202 F) Improve your accuracy
More informationARL OESIADAU INNOVATIONS
ARL OESIADAU INNOVATIONS About Us Contacts Opto-Mechanical Design Precision OPtical Polishing Surface metrology Case Studies About Us Ltd is a technology company, located in the OpTIC Centre, a large scale
More informationTECHNICAL PRESENTATION FLOW METER CALIBRATION SYSTEM. G Rajabaskaran Vice Chairman
TECHNICAL PRESENTATION FLOW METER CALIBRATION SYSTEM 1 G Rajabaskaran Vice Chairman Nagman is an ISO 90001:2008 certified company and serving the global market since 1972 Our calibration lab is accredited
More informationComplete 3D measurement solution
Complete 3D measurement solution Complete access The S neox Five Axis 3D optical profiler combines a high-accuracy rotational module with the advanced inspection and analysis capabilities of the S neox
More informationLaser Doppler Displacement Meter Laser Measurement System
Laser Doppler Displacement Meter Laser Measurement System Title: Incoming inspection procedure Document identification: MCV 500 incoming OPTODYNE, INC. 1180 Mahalo Place Compton, CA 90220 310-635-7481
More informationHigh Performance, Full-Digital Control on the LMT and KVN Telescopes
High Performance, Full-Digital Control on the LMT and KVN Telescopes David R. Smith (MERLAB), alpha@merlab.com Kamal Souccar (UMass), David Gale (INAOE), F. Peter Schloerb (Umass), David Hughes (INAOE)
More informationPrecimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION
Precimar Precimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION Mahr's universal length measuring machines are designed for absolute and relative measurement
More information1523/1524. Reference Thermometers. Measure, graph and record three sensor types with one tool
1523/1524 Reference Thermometers Measure, graph and record three sensor types with one tool Finally, a reference thermometer as versatile as you The 1523/24 Reference Thermometers from Fluke Calibration
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 J.H. METROLOGY CO., INC. 1801 Hicks Road, Unit E Rolling Meadows, IL 60008 Neil E. Willert Phone: 847 991 0290 CALIBRATION Valid To:
More informationMass Flow Meters, Controllers and Manifolds
to get there. together. Mass Flow Meters, Controllers and Manifolds Swiss made High-performance gas flow control for OEMs Overview Axetris offers OEM Mass Flow Meters (MFM), Controllers (MFC) and Manifolds
More informationFluke 744 Documenting Process Calibrator-HART
Fluke 744 Documenting Process Calibrator-HART The 744 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software-or upload data for
More informationInvestigating the volumetric performance of multi-axis measurement arms
Investigating the volumetric performance of multi-axis measurement arms J.Singh, M.Hughes & J N Petzing Wolfson School of Mechanical & Manufacturing Engineering Loughborough Universty, UK Abstract Multi-axis
More informationMONITORING THE REPEATABILITY AND REPRODUCIBILTY OF A NATURAL GAS CALIBRATION FACILITY
MONITORING THE REPEATABILITY AND REPRODUCIBILTY OF A NATURAL GAS CALIBRATION FACILITY T.M. Kegel and W.R. Johansen Colorado Engineering Experiment Station, Inc. (CEESI) 54043 WCR 37, Nunn, CO, 80648 USA
More informationEntering a Whole New Dimension The ULTRAHEAT XS Heat Meter
Entering a Whole New Dimension The ULTRAHEAT XS Heat Meter Volume measuring unit [ Highest measurement accuracy ULTRAHEAT XS measures flow rate by the ultrasonic dragging principle. Two transducers alternately
More informationCh 22 Inspection Technologies
Ch 22 Inspection Technologies Sections: 1. Inspection Metrology 2. Contact vs. Noncontact Inspection Techniques 3. Conventional Measuring and Gaging Techniques 4. Coordinate Measuring Machines 5. Surface
More informationLaboratory Accreditation Programmes
Laboratory Address PO Box 79085, Avonhead, Christchurch, 8446 3 Homersham Place, Burnside, Christchurch, 8053 Telephone 03 358-8309 Fax 03 358-2516 URL Authorised Representative Client No. 85 Programme
More informationPage : 1 of 40. FIELD OF TESTING : Calibration and Measurement CALIBRATION & MEASUREMENT CAPABILITY (CMC*)
Caltek Pte Ltd Certificate No. : LA-2003-0292-C 23 Tagore Lane #04-08/09/10/11 Issue No. : 15 Tagore 23 Warehouse Singapore 787601 Date : 15 November 2017 FIELD OF TESTING : Calibration and Measurement
More informationHIGH SPEED PROJECTILE RECORDING SYSTEM
International Journal of Scientific & Engineering Research, Volume 3, Issue 10, October-2012 1 HIGH SPEED PROJECTILE RECORDING SYSTEM Dileep Kumar 1, Anshul Gaur 2, 1,2 EI Dept., RGGI Meerut dileep.inst@gmail.com,
More informationA FEW CASE STUDIES IN UNCERTAINTY USING THE NIST M48 CMM
A FEW CASE STUIES IN UNCERTAINTY USING THE NIST M48 CMM John Stoup Precision Engineering ivision National Institute of Standards and Technology Gaithersburg, Maryland 20899 INTROUCTION The Moore M48 coordinate
More informationGuideways X axis Precision-manufactured, anodized extruded profile made of light metal. On stabilized, welded steel supports
ZEISS MMZ E Specifications Version: November 2017 System description Type according to ISO 10360-1:2000 Gantry CMM Guideways X axis Precision-manufactured, anodized extruded profile made of light metal
More informationPurpose of Today s Presentation
Metering, Monitoring, and Verification Part 1 APPA Institute for Facilities Management Scottsdale, AZ September 15, 2015 Purpose of Today s Presentation To provide a broad understanding of: Metering installation
More informationPrecimar. PLM and CiM Universal Length Measuring Machines
24 Precimar. Precision Length Metrology Precimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION Mahr's universal length measuring machines are designed
More informationCustody Transfer Accuracy in an 8-Path Ultrasonic Flow Meter with 5D Upstream Straight Run
Custody Transfer Accuracy in an 8-Path Ultrasonic Flow Meter with 5D Upstream Straight Run Author: Nick Mollo, Principal Engineer Presenter: Gerard Bottino, Global Sales Manager Flow gerard.bottino@bhge.com
More informationTemperature Measurement and Calibration. Industrial Calibration Selection Guide. Multifunction Process Calibrator.
Multifunction Process Calibrator Industrial Calibration Selection Guide Look inside for: Field Metrology Wells Infrared Calibrators Handheld and Field Dry-Wells 1 Temperature Measurement and Calibration
More informationEXPLORER CLASSIC BRIDGE COORDINATE MEASURING MACHINE PRODUCT BROCHURE
EXPLORER CLASSIC BRIDGE COORDINATE MEASURING MACHINE PRODUCT BROCHURE EXPLORER CLASSIC UNSURPASSED MEASURING RANGE Available in sizes to suit every kind of business, Explorer Classic machines combine innovative
More informationReliable Force Measurement
Reliable Force Measurement HBM force transducers for industry and research HBM force transducers HBM force transducers Versatile in Use, Proven Worldwide HBM always offers the right solution Full range
More informationSupplied with. Calibration certificate. HD 200 Hygrometer
Supplied with Calibration certificate HD 200 Hygrometer Table of contents 3 I Technical specifications...4 Technical features......4 Specifications......4 II Introduction......5 Description......5 Connections......6
More information! Ranges from -45º to 650ºC. ! Rapid heating, cooling and settling. ! Switch test, ramp, step and preset functions
DBC SERIES DBC 150/650 Series Dry Block Temperature Calibrators 99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com! s from -45º to 650ºC! Rapid heating, cooling and settling!
More informationUsing Capacitance Probes to Measure the Limit of Machine Contouring Performance
Using Capacitance Probes to Measure the Limit of Machine Contouring Performance Don Martin, Lion Precision, 563 Shoreview Park Road, St. Paul, NIN 55126 Most machine tools used for discrete part manufacturing
More informationResource Inspections Canada Inc. Certification Scheme Requirements
1. Purpose To describe the requirements for certification scheme for certified calibration laboratory technician for mechanical calibrations conducted by Resource Inspections Canada Incorporated. This
More informationPixel Size Calibration of Video Probe Measuring Machines James G. Salsbury Center for Precision Metrology University of North Carolina at Charlotte
Pixel Size Calibration of Video Probe Measuring Machines James G. Salsbury Center for Precision Metrology University of North Carolina at Charlotte Coordinate measuring machines (CMMs) equipped with video
More informationMotion Analysis Methods. Gerald Smith
Motion Analysis Methods Gerald Smith Measurement Activity: How accurately can the diameter of a golf ball and a koosh ball be measured? Diameter? 1 What is the diameter of a golf ball? What errors are
More informationCyberGage360 3D SCANNERS. One-Button Automation for 3D Scan Inspection.
CyberGage360 One-Button Automation for 3D Scan Inspection. 3D SCANNERS Unprecedented speed, accuracy and one-button simplicity for non-contact automated 3D scanning inspection. Powered by MRS Technology
More informationConductivity Transmitters
Conductivity Transmitters CDTX-90 Series Starts at $ 576 Electronics Only Display in µs, ms, kω, MΩ, ppm (TDS) Simulate Function Programmable Temperature Compensation Relay Options Dual Output Option Allows
More informationModel S471 Portable Optometer
Model S471 Portable Optometer With over 50 years of experience in developing light measurement instruments, Gamma Scientific is trusted by the world s leading organizations to provide accurate results.
More informationAn introduction to the National Voluntary Laboratory Accreditation Program
An introduction to the National Voluntary Laboratory Accreditation Program Sally Bruce, Chief for the National Voluntary Laboratory Accreditation Program (NVLAP) NIST Headquarters Gaithersburg, MD The
More informationMSA-500 Micro System Analyzer. Measuring 3-D Dynamics and Topography of MEMS and Microstructures
MSA-500 Micro System Analyzer Measuring 3-D Dynamics and Topography of MEMS and Microstructures Complete 3-D Characterization Static and dynamic analysis and visualization are a critical part of the test
More informationDevelopment of the next generation of 3D probing systems for the future co-ordinate measuring
Development of the next generation of 3D probing systems for the future co-ordinate measuring machines and machine tools D.R. McMurtry Renishaw pic, New Mills, Wotton-under-Edge, Gloucestershire, GI72
More informationThe Modal Shop, Inc. A PCB Group Company
The Modal Shop, Inc. A PCB Group Company Measurement Sector Systems Sector The TMS/PCB Relationship o PCB Focuses on Components and Sensors Accelerometers Microphones Pressure Sensors Signal Conditioning
More informationEDX-10 Series. Compact Recording System
3-51 EDX-10 Series Compact Recording System Compact & lightweight, with a simple configuration, all channels synchronous 20 khz high-speed sampling (For 4 channels) Control Unit EDX-10B A unit controls
More informationCalibration of Electromagnetic Flowmeter Using Advanced SCADA System
FLOTEK.G 2017- Innovative Solutions in Flow Measurement and Control- Oil, Water and Gas August 28-30, 2017, FCRI, Palakkad, Kerala, India Calibration of Electromagnetic Flowmeter Using Advanced SCADA System
More informationTHE ROBOT-MOUNTED OPTICAL CMM 3D SCANNERS FOR AUTOMATED INSPECTION
METROLOGY SOLUTIONS THE ROBOT-MOUNTED OPTICAL CMM 3D SCANNERS FOR AUTOMATED INSPECTION Accelerate your industrial inspection processes by bringing quality control as close to the part as possible. For
More informationMultifunction Calibrator
Multifunction Calibrator 5 Multifunction Calibrator Multifunction MC5 is the first of its kind modular ALL-IN-ONE multifunction calibrator. Within its compact and ergonomic case, MC5 provides calibration
More informationArtifact Calibration and Its Use in Calibrating 8.5 Digit DMMs
Artifact Calibration and Its Use in Calibrating 8.5 Digit DMMs Author: Jack Somppi Product Marketing Manager Fluke Calibration, Everett, Washington, USA jack.somppi@flukecal.com Abstract Verifying that
More informationEE360. High-End Moisture in Oil Transmitter. Typical applications. Features EE360 EE360. (+34)
is dedicated for reliable monitoring of lubrication, hydraulic and insulation oils as well as diesel fuel. In addition to highly accurate measurement of water activity (a w ) and temperature (T), calculates
More informationDATA SHEET DEA GLOBAL SILVER 09.XX XX.10
DATA SHEET DEA GLOBAL SILVER 09.XX.08-12.XX.10 Classic Performance Advantage Temperature Compensation Optional CLIMA CLIMA CLIMA Performance Environment Standard: 18 22 C Option CLIMA: 16 26 C Standard:
More informationGood Practice guide to measure roundness on roller machines and to estimate their uncertainty
Good Practice guide to measure roundness on roller machines and to estimate their uncertainty Björn Hemming, VTT Technical Research Centre of Finland Ltd, Finland Thomas Widmaier, Aalto University School
More informationDeFelsko PosiTector IRT Infrared Thermometer Probes
Management Procedure 2572 Revision: A Date Issued: April 12, 2018 Date Revised: Calibration Procedure DeFelsko PosiTector IRT Infrared Thermometer Probes Table of Contents 1 Introduction and UUC Performance
More informationSensor Report: Hot Wire Anemometers
Introduction Sensor Report: Hot Wire Anemometers Paul Kawka Mechatronics GE330 3/17/03 Anemometry is the measurement of gas speeds, and a variety of different sensors have been developed to accurately
More informationTHE ROBOT-MOUNTED OPTICAL CMM 3D SCANNERS FOR AUTOMATED INSPECTION
METROLOGY SOLUTIONS THE ROBOT-MOUNTED OPTICAL CMM 3D SCANNERS FOR AUTOMATED INSPECTION Accelerate your industrial inspection processes by bringing quality control as close to the part as possible. For
More information11.0 Measurement of Spindle Error Motion
11.0 Measurement of Spindle Error Motion 11.1 Introduction The major spindle error motion is caused by the alignment of the spindle rotational axis, the centerline of the tool holder and the centerline
More informationCFM/CMM Hot-Wire Thermoanemometer
User Manual CFM/CMM Hot-Wire Thermoanemometer with NIST-Traceable Calibration Model 20250-16 Max Min Flow Temp THE STANDARD IN PRECISION MEASUREMENT 2 Introduction The Digi-Sense CFM/CMM Hot-Wire Thermoanemometer
More informationOverview of Guildline s 6625A Resistance Measurement System
Overview of Guildline s 6625A Resistance Measurement System Overview The 6625A is a modular, customer specified Resistance Measurement System. Typically, the System is composed of a 6622A Series Bridge,
More informationUser's Guide. Heavy Duty Vane Thermo-Anemometer. Model
User's Guide Heavy Duty Vane Thermo-Anemometer Model 407112 407112 Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 FAX 781.665.0780 - TestEquipmentDepot.com Specifications Circuit
More informationTABLE OF CONTENTS 3.0 QUALITY ASSURANCE PROGRAM TEST EQUIPMENT AND INSTRUMENTATION 5 ATTACHMENTS A PHOTOGRAPHS A-1 B VIBRATION TEST DATA B-1
Page No. 2 TABLE OF CONTENTS Page No. 1.0 INTRODUCTION 3 1.1 Scope 3 1.2 References 3 1.3 Test Specimen Description 3 1.4 Summary 3 2.0 TEST PROCEDURES AND RESULTS 4 2.1 Vibration Resonance Search Test
More informationUser Manual. Heavy Duty Hot Wire CFM Thermo-Anemometer. Model
User Manual Heavy Duty Hot Wire CFM Thermo-Anemometer Model 407119 Introduction Congratulations on your purchase of the Extech 407119 Thermo-Anemometer. The 407119 measures air velocity, air volume, and
More informationEDX-10 Series. Compact Recording System
3-49 EDX-10 Series Compact Recording System Compact, lightweight, with a simple configuration, all channels synchronous 20 khz high-speed sampling (For 4 channels) Control Unit EDX-10B A unit controls
More informationLABMICROMETER. Pratt & Whitney UNIVERSAL LENGTH MEASURING SYSTEM. Measurement Systems, Inc.
Pratt & Whitney Measurement Systems, Inc. The Standard of Accuracy Laser-Based LABMICROMETER is designed to provide the ultimate in user-friendly operation while delivering calibration-quality accuracy
More informationCyberGage 360 3D SCANNERS. One-Button Automation for 3D Scan Inspection.
CyberGage 360 One-Button Automation for 3D Scan Inspection. Powered by MRS Technology 3D SCANNERS Unprecedented speed, accuracy and one-button simplicity for non-contact automated 3D scanning inspection.
More informationLABVIEW APPLICATION: ENERGY LABORATORY UPGRADE
Session 3233 LABVIEW APPLICATION: ENERGY LABORATORY UPGRADE J. Howard Arthur Michael R. Sexton Mechanical Engineering Department Virginia Military Institute Lexington, VA 24450 Abstract This paper describes
More informationEE75 Series. High-Precision Air / Gas Velocity Transmitter for Industrial Applications. Model A. Model B. Model C. Typical Applications.
Series High-Precision Air / Gas Velocity Transmitter for Industrial Applications The series air velocity transmitters were developed to obtain accurate measuring results over a wide range of velocities
More informationTESTING VISION CMMS AND THE INTERNATIONAL STANDARD, ISO
TESTING VISION CMMS AND THE INTERNATIONAL STANDARD, ISO 10360-7 A TECHNICAL PRESENTATION FROM THE LEADING MANUFACTURER OF METROLOGY INSTRUMENTS EDUCATION Bulletin No. 2183 EDU-14004A-P Mitutoyo Institute
More informationUser's Guide. Heavy Duty Vane Thermo-Anemometer. Model
User's Guide Heavy Duty Vane Thermo-Anemometer Model 407112 407112 Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date
More informationElection Summary JACKSON COUNTY, MISSOURI GENERAL ELECTION NOVEMBER 4, 2014 (Official)
Election Summary JACKSON COUNTY, MISSOURI GENERAL ELECTION NOVEMBER 4, 2014 (Official) 207 OF 207 POLLS REPORTING Friday, November 7 2014 15:27:51 Non-Partisan FOR STATE AUDITOR Total: 73125 TOM SCHWEICH*
More informationSTATE COLLEGE OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MFGT INSTRUMENTATION AND CONTROLS
STATE COLLEGE OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MFGT 220 - INSTRUMENTATION AND CONTROLS Prepared By: Daniel Miller Revised By: Daniel Miller 4/5/12 CANINO SCHOOL OF ENGINEERING
More informationAutomated High Pressure Calibrator Model CPC 8000
Calibration Technology Automated High Pressure Calibrator Model CPC 8000 Mensor Data Sheet CPC 8000 02/2012 Applications Calibration of industrial pressure instruments Pressure transmitter manufacturers
More informationPneumatic High-Speed Pressure Controller Model CPC3000
Calibration Technology Pneumatic High-Speed Pressure Controller Model CPC3000 02/2014 Applications Industry (laboratory, workshop and production) Pressure transmitter manufacture Calibration service companies
More informationFor the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Pyromation Inc. Metrology Laboratory 5211 Industrial Road Fort Wayne, IN 46825-5152 Mr. Chris Moritz Phone: 260-484-2580 Fax: 260-482-6805 E-mail: chris@pyromation.com
More informationIND62 TIM CALIBRATION OF FREE-FORM STANDARD AND THEIR APPLICATIONS FOR IN-PROCESS MEASUREMENT ON MACHINE TOOLS
IND62 TIM CALIBRATION OF FREE-FORM STANDARD AND THEIR APPLICATIONS FOR IN-PROCESS MEASUREMENT ON MACHINE TOOLS VÍT ZELENÝ, IVANA LINKEOVÁ, PAVEL SKALNÍK (LENGTH MEASUREMENT DEPARTMENT) 5th November 2014
More informationContents 1 Measurement and Machine Tools An Introduction
Contents 1 Measurement and Machine Tools An Introduction... 1 1.1 Why the Need for Accurate and Precise Machine Tools a Brief History.... 1 1.2 The Early Historical Development of a Linear Measurements....
More informationFCRI Evaluation of Orifice Meter Validation System
flotek.g Innovative Solutions in Flow Measurement and Control Oil, Water and Gas August 28-30, 2017, FCRI, Palakkad, Kerala, India FCRI Evaluation of Orifice Meter Validation System 1. ABSTRACT Hemant
More informationEase of Use. Data at Your Fingertips LMS PHARMA
LMS PHARMA Ease of Use LMS Pharma was designed with an ICON driven user interface which greatly simplifies the user experience. Color coded status and unique shaped ICONS enhance the already intuitive
More information525A Temperature/ Pressure Calibrator
55A Temperature/ Pressure Calibrator Superior accuracy and functionality in an economical benchtop package Technical Data The Fluke 55A Temperature/ Pressure Calibrator gives you a workhorse combination
More information