ChemDrain. ChemDrain CPVC Chemical Waste Drain System DIMENSIONAL CATALOG. (Updated November 13, 2018) DC-CD

Transcription

1 DMESOAL AALOG hemdrain hemdrain PV hemical Waste Drain System (Updated ovember 13, 2018) harlotte Pipe and Foundry ompany D-D

2 hemdrain PV hemical Waste Drain System Dimensions All products manufactured by harlotte Pipe and Foundry ompany are proudly made in the U.S.A.

3 able of ontents Page hemdrain PV Schedule-40 Pipe Dimensions... 4 hemdrainpv Schedule-40 Fitting Dimensions Warranty Download our ech ools App for dimensional info, tech calculators and more on your mobile device. his catalog accurately reflects dimensional information to the best of our knowledge. f the dimensions on your job are critical, please verify dimensional information with our factory. his dimensional catalog accurately reflects our product line at the time the catalog was printed. However, we add items on an ongoing basis to better serve our customers. Please refer to our current list price sheets for an accurate listing of items offered. harlotte Pipe products are manufactured to the applicable ASM standard. harlotte Pipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, or couplings not manufactured or sold by harlotte Pipe and Foundry. harlotte Pipe and hemdrain are registered trademarks of harlotte Pipe and Foundry ompany. 3

4 hemdrain PV Sch 40 Pipe hemdrain PV Pipe Possession of this price list shall not be construed as an offer to sell the products listed. hemdrain is a registered trademark of harlotte Pipe and Foundry ompany. hemdrain PV Schedule 40 Pipe, ype V, Grade 1 PV SHEDULE 40 (LGH GRAY) PLA ED PV 4120 M. W. PER PAR O. OM. SZE UP # QY. PER AVG. OD WALL 100 F SKD (.) (.) (LBS.) AW x AW x AW x AW x AW x AW x OE: Full skids of pipe are polyethylene wrapped for cleanliness and UV protection. SF Listed. Meets All Requirements of ASM F ASM F 2618 esting with or use of compressed air or gas in PV / ABS / PV pipe or fittings can result in explosive failures and cause severe injury or death. EVER test with or transport/store compressed air or gas in PV / ABS / PV pipe or fittings. EVER test PV / ABS / PV pipe or fittings with compressed air or gas, or air over water boosters. OLY use PV / ABS / PV pipe or fittings for water or approved chemicals. Refer to warnings on PPFA s website and ASM D All products manufactured by harlotte Pipe and Foundry ompany are proudly made in the U.S.A. 4

5 hemdrain PV Fittings hemdrain PV Fittings Hub Dimensions H E M D R A PV F PV SZE A B D G S 5

6 hemdrain PV Fittings PAR O. AW 95 ransition oupling - hemdrain PV to Steel, ast ron, Plain-end Glass or Any Other Schedule 40 or 80 PS Size Plastic or Metallic Pipe (300 Series Stainless Steel with Fluoroelastomer Gasket) SHELD UMBER SZE WDH OF LAMPS PAR O. AW 96 ransition oupling - hemdrain PV to Plain-end High-silicon ron (300 Series Stainless Steel with Fluoroelastomer Gasket) SHELD UMBER SZE WDH OF LAMPS PAR O. AW 1 hemdrain Low-VO Solvent ement 6

7 hemdrain PV Fittings PAR O. AW 100 oupling HUB X HUB SZE A B H E M D R A PV F PAR O. AW 101 Female Adapter FP X HUB SZE A B G S PAR O. AW 102 SZE Pipe ncreaser-reducer HUB X HUB A x x x x x x x

8 hemdrain PV Fittings PAR O. AW 103P rap Adapter-Male SPGO X SLP WH PLAS U SZE A PAR O. AW 103R rap Adapter-Male with Plastic ut and Washer SPGO X SLP WH PLAS U SZE A PAR O. AW 104R SZE rap Adapter-Female with Plastic ut and Washer HUB X SLP WH PLAS U A 3 16 PAR O. AW 105X Fitting leanout Adapter with leanout Plug (See AW 106 Dimensions) SPGO X FP SZE A B

9 hemdrain PV Fittings PAR O. AW 106 leanout Plug MP SZE A B PAR O. AW 107 Flush Bushing SPGO X HUB SZE A 2 x x x x x 3* x x x x * 4 x 3 differs slightly in appearance H E M D R A PV F G S PAR O. AW 109 SZE Male Adapter MP X HUB (ote: ot a trap adapter. Will not accept a tail piece.) A (Octagon shoulders for tightening purposes.) 9

10 hemdrain PV Fittings PAR O. AW 116 ap SOKE SZE A PAR O. AW 300 SZE 1/4 Bend (Sanitary 90 Ell) A PAR O. AW 302 1/4 Bend, Street (Sanitary 90 Street Ell) SPGO X HUB SZE A B

11 hemdrain PV Fittings PAR O. AW 304 SZE PAR O. AW 321 SZE Long Sweep 1/4 Bend HUB X HUB A /8 Bend (45 Ell) HUB X HUB A H E M D R A PV F G S PAR O. AW 323 1/8 Bend, Street (45 Street Ell) SPGO X HUB SZE A B

12 hemdrain PV Fittings PAR O. AW 324 SZE 1/16 Bend ( Ell) HUB X HUB A PAR O. AW 326 1/16 Bend, Street ( Street Ell) SPGO X HUB SZE A B PAR O. AW 327 Double 1/4 Bend SZE A B

13 hemdrain PV Fittings PAR O. AW 400 Sanitary ee SZE A B PAR O. AW 401 Sanitary ee, Reducing SZE A B 2 x x x x x 2 x x 3 x x 3 x x 4 x x 4 x x 6 x H E M D R A PV F G S PAR O. AW 428 Double Sanitary ee (Sanitary ross) SZE A B

14 hemdrain PV Fittings PAR O. AW 429 Double Sanitary ee, Reducing (Sanitary ross) SZE A B 2 x 2 x x x 3 x 2 x PAR O. AW 444X leanout ee with leanout Plug HUB X HUB X FP SZE A B leanout Plug MP SZE A B PAR O. AW 501 ombination Wye and 1/8 Bend (One Piece) SZE A B

15 hemdrain PV Fittings PAR O. AW 502 ombination Wye and 1/8 Bend, Reducing (One Piece) SZE A B 2 x 2 x x 3 x x 3 x x 4 x x 4 x H E M D R A PV F PAR O. AW 503 ombination Wye and 1/8 Bend SZE A B 6** ** ** wo pieces G S PAR O. AW 504 ombination Wye and 1/8 Bend, Reducing SZE A B 6 x 6 x 3** x 6 x 4* * One piece short pattern ** wo pieces 15

16 hemdrain PV Fittings PAR O. AW 507 Double ombination Wye and 1/8 Bend SZE A B x2x1 1 2x x3x2x x4x2x x4x3x hree pieces. PAR O. AW 600 Wye (45 Wye) SZE A B PAR O. AW 601 Wye, Reducing (45 Wye) SZE A B 2 x 2 x x 3 x x 3 x x 4 x x 4 x x 6 x x 8 x x 8 x

17 hemdrain PV Fittings PAR O. AW 611 Double Wye (Double 45 Wye) SZE A B PAR O. AW 612 Double Wye, Reducing (Double 45 Wye) SZE A B 2 x 2 x x x 3 x 2 x x 4 x 3 x H E M D R A PV F G S PAR O. AW 706X P-rap with Solvent Weld Joint HUB X HUB SZE A B PAR O. AW 707X P-rap with leanout, Solvent Weld Joint HUB X HUB SZE A B

18 hemdrain PV Fittings PAR O. AW 708P P-rap with Union HUB X HUB WH PLAS U SZE A B PAR O. AW 711P L.A. Pattern P-rap with Union SLP X HUB WH PLAS U SZE A B ut is sized to fit tubular sink tailpieces. PAR O. AW 712 Jar rap SLP X HUB SZE A B D PAR O. AW 712P Jar rap with ail Piece Adaptor SLP X HUB WH PLAS U SZE A B D ut is sized to fit tubular sink tailpieces. PAR O. AW 1512P PV ail Piece with ut (May be cut to length) Supplied with a Fluoroelastomer Gasket SZE A B x ubular O.D. 18

19 LMED WARRAY harlotte Pipe and Foundry ompany (harlotte Pipe ) Products are warranted to be free from manufacturing defects and to conform to currently applicable ASM standards for a period of five (5) years from date of delivery. Buyer s remedy for breach of this warranty is limited to replacement of, or credit for, the defective product. his warranty excludes any expense for removal or reinstallation of any defective product and any other incidental, consequential, or punitive damages. his limited warranty is the only warranty made by seller and is expressly in lieu of all other warranties, express and implied, including any warranties of merchantability and fitness for a particular purpose. o statement, conduct or description by harlotte Pipe or its representative, in addition to or beyond this Limited Warranty, shall constitute a warranty. his Limited Warranty may only be modified in writing signed by an officer of harlotte Pipe. his Limited Warranty will not apply if: 1) he Products are used for purposes other than their intended purpose as defined by local plumbing and building codes, and the applicable ASM standard. 2) he Products are not installed in good and workmanlike manner consistent with normal industry standards; installed in compliance with the latest instructions published by harlotte Pipe and good plumbing practices; and installed in conformance with all applicable plumbing, fire and building code requirements. 3) his limited warranty does not apply when the products of harlotte Pipe are used with the products of other manufacturers that do not meet the applicable ASM or SP standards or that are not marked in a manner to indicate the entity that manufactured them. 4) n hubless cast iron installations, this warranty will not apply if products are joined with unshielded hubless couplings. harlotte Pipe requires that its hubless cast iron pipe and fittings be joined only with shielded hubless couplings manufactured in accordance with SP 310, ASM 1277 and certified by SF nternational or with Heavy Duty ouplings meeting ASM ) he Products fail due to defects or deficiencies in design, engineering, or installation of the piping system of which they are a part. 6) he Products have been the subject of modification; misuse; misapplication; improper maintenance or repair; damage caused by the fault or negligence of anyone other than harlotte Pipe; or any other act or event beyond the control of harlotte Pipe. 7) he Products fail due to the freezing of water in the Products. 8) he Products fail due to contact with chemical agents, fire stopping materials, thread sealant, plasticized vinyl products, or other aggressive chemical agents that are not compatible. 9) Pipe outlets, sound attenuation systems or other devices are permanently attached to the surface of harlotte PV, ABS or PV products with solvent cement or adhesive glue. harlotte Pipe products are manufactured to the applicable ASM or SP standard. harlotte Pipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by harlotte Pipe and Foundry. Any harlotte Pipe products alleged to be defective must be made available to harlotte Pipe at the following address for verification, inspection and determination of cause: harlotte Pipe and Foundry ompany Attention: echnical Services 2109 Randolph Road harlotte, orth arolina esting with or use of compressed air or gas in PV / ABS / PV / ast ron pipe or fittings can result in explosive failures and cause severe injury or death. EVER test with or transport/store compressed air or gas in PV / ABS / PV / ast ron pipe or fittings. EVER test PV / ABS / PV / ast ron pipe or fittings with compressed air or gas, or air over water boosters. OLY use PV / ABS / PV / ast ron pipe or fittings for water or approved chemicals. Refer to warnings on PPFA s website and ASM D Purchaser must obtain a return materials authorization and instructions for return shipment to harlotte Pipe of any product claimed defective or shipped in error. Any harlotte Pipe product proved to be defective in manufacture will be replaced F.O.B. point of original delivery, or credit will be issued, at the discretion of harlotte Pipe. 4/24/15 L M E D W AR R A Y harlotte and harlotte Pipe are registered trademarks of harlotte Pipe and Foundry ompany. 19

20 PO BOX HARLOE ORH AROLA PHOE (704) (800) FAX (800)