H3C MSR Router Series

Transcription

1 H3C MSR Router Series Comware 7 Probe Command Reference New H3C Technologies Co., Ltd. Software version: MSR-CMW710-R0615P08 Document version: 6W

2 Copyright , New H3C Technologies Co., Ltd. and its licensors All rights reserved part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd. Trademarks H3C,, H3CS, H3CIE, H3CNE, Aolynk,, H 3 Care,, IRF, NetPilot, Netflow, SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of New H3C Technologies Co., Ltd. All other trademarks that may be mentioned in this manual are the property of their respective owners. tice The information in this document is subject to change without notice. All contents in this document, including statements, information, and recommendations, are believed to be accurate, but they are presented without warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions contained herein.

3 Preface This command reference describes describes the commands in the probe view. This preface includes the following topics about the documentation: Audience. Conventions Documentation feedback Audience This documentation is intended for: Network planners. Field technical support and servicing engineers. Network administrators working with the H3C MSR Router series. Conventions The following information describes the conventions used in the documentation. Command conventions Convention Boldface Italic Description Bold text represents commands and keywords that you enter literally as shown. Italic text represents arguments that you replace with actual values. [ ] Square brackets enclose syntax choices (keywords or arguments) that are optional. { x y... } [ x y... ] { x y... } * [ x y... ] * &<1-n> Braces enclose a set of required syntax choices separated by vertical bars, from which you select one. Square brackets enclose a set of optional syntax choices separated by vertical bars, from which you select one or none. Asterisk marked braces enclose a set of required syntax choices separated by vertical bars, from which you select a minimum of one. Asterisk marked square brackets enclose optional syntax choices separated by vertical bars, from which you select one choice, multiple choices, or none. The argument or keyword and argument combination before the ampersand (&) sign can be entered 1 to n times. # A line that starts with a pound (#) sign is comments. GUI conventions Convention Boldface > Description Window names, button names, field names, and menu items are in Boldface. For example, the New User window opens; click OK. Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

4 Symbols Convention WARNING! CAUTION: IMPORTANT: NOTE: TIP: Description An alert that calls attention to important information that if not understood or followed can result in personal injury. An alert that calls attention to important information that if not understood or followed can result in data loss, data corruption, or damage to hardware or software. An alert that calls attention to essential information. An alert that contains additional or supplementary information. An alert that provides helpful information. Network topology icons Convention Description Represents a generic network device, such as a router, switch, or firewall. Represents a routing-capable device, such as a router or Layer 3 switch. Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports Layer 2 forwarding and other Layer 2 features. Represents an access controller, a unified wired-wlan module, or the access controller engine on a unified wired-wlan switch. Represents an access point. T Represents a wireless terminator unit. T Represents a wireless terminator. Represents a mesh access point. Represents omnidirectional signals. Represents directional signals. Represents a security product, such as a firewall, UTM, multiservice security gateway, or load balancing device. Represents a security module, such as a firewall, load balancing, NetStream, SSL VPN, IPS, or ACG module. Examples provided in this document Examples in this document might use devices that differ from your device in hardware model, configuration, or software version. It is normal that the port numbers, sample output, screenshots, and other information in the examples differ from what you have on your device.

5 Documentation feedback You can your comments about product documentation to We appreciate your comments.

6 Contents Probe commands 1 C 1 cloud-management local-port 1 crypto-engine accelerator disable 1 D 2 debugging ha 2 debugging lipc 2 debugging lipc mtcp 3 debugging lipc stcp 4 debugging system internal adj4 5 debugging system internal adj6 5 debugging system internal arp event 6 debugging system internal arp features 6 debugging system internal arp notify 6 debugging system internal arp sync 7 debugging system internal igmp-snooping fsm tracing 7 debugging system internal ip topology 8 debugging system internal ip vpn-instance 9 debugging system internal ipv6 fib prefix 10 debugging system internal l2vpn l2vfib 11 debugging system internal lisp database 12 debugging system internal lisp forward 12 debugging system internal lisp map-cache 13 debugging system internal lisp mobility 13 debugging system internal lisp tunnel 14 debugging system internal lisp upcall 14 debugging system internal mld-snooping fsm tracing 15 debugging system internal mpls forwarding protection 16 debugging system internal mpls lfib 17 debugging system internal nd 18 debugging system internal nd sub-features 19 debugging system internal openflow 19 debugging system internal overlay mac-address 20 debugging system internal stg 20 debugging system internal stp 21 debugging system internal vlan 21 debugging system internal wlan ap queue message-process-count 22 debugging system internal wlan ap queue message-type-count 22 debugging system internal wlan ap queue message-type-trace 23 debugging system internal wlan bss-report 24 debugging system internal wlan client 25 debugging system internal wlan forward packet 26 debugging system internal wsal 27 debugging transceiver 27 debugging wlan ap app 28 debugging wlan radio 29 display fastforward session table 30 display hardware internal transceiver register interface 31 display system internal acl 32 display system internal adj4 entry 32 display system internal adj4 statistics 33 display system internal adj6 entry 33 display system internal adj6 statistics 34 display system internal adjacent-table 35 display system internal aft 35 display system internal arp 36 display system internal arp ifcb 36 i

7 display system internal arp ip-address 37 display system internal arp machash 37 display system internal arp probe 38 display system internal arp rbhash 39 display system internal arp reload 39 display system internal arp rule 40 display system internal arp snooping 40 display system internal arp source-suppression cache 41 display system internal arp statistics 42 display system internal arp suppression xconnect-group verbose 42 display system internal arp vlan 43 display system internal aspf statistics 44 display system internal attack-defense scan stat-nodes ip 45 display system internal attack-defense scan stat-nodes ipv6 46 display system internal bfd packet statistics 47 display system internal bgp address-family statistics 47 display system internal bgp graceful-restart statistics 50 display system internal bgp interface 50 display system internal bgp l2vpn auto-discovery advertise-info 51 display system internal bgp l2vpn auto-discovery standby 52 display system internal bgp l2vpn auto-discovery verbose 53 display system internal bgp l2vpn evpn 55 display system internal bgp l2vpn signaling advertise-info 56 display system internal bgp l2vpn signaling standby 58 display system internal bgp l2vpn signaling verbose 59 display system internal bgp link-state 61 display system internal bgp log 61 display system internal bgp nib 62 display system internal bgp nib log 62 display system internal bgp peer standby 63 display system internal bgp peer statistics 64 display system internal bgp protocol statistics 66 display system internal bgp routing-table advertise-info 67 display system internal bgp routing-table ipv4 multicast standby 70 display system internal bgp routing-table ipv4 rtfilter standby 71 display system internal bgp routing-table ipv4 unicast outlabel standby 72 display system internal bgp routing-table ipv4 unicast standby 73 display system internal bgp routing-table ipv6 multicast standby 75 display system internal bgp routing-table ipv6 unicast outlabel standby 76 display system internal bgp routing-table ipv6 unicast standby 77 display system internal bgp routing-table verbose 78 display system internal bgp routing-table vpnv4 outlabel standby 81 display system internal bgp routing-table vpnv4 standby 81 display system internal bgp routing-table vpnv6 outlabel standby 83 display system internal bgp routing-table vpnv6 standby 84 display system internal bgpm log 85 display system internal client-verify http redirect-node 86 display system internal client-verify statistics (for interface) 87 display system internal cloud-management state 88 display system internal control-plane statistics 89 display system internal dbm 89 display system internal dot11 characteristics 90 display system internal dot11 verbose 91 display system internal evi flooding 91 display system internal evi selective-flooding 92 display system internal evi statistics 93 display system internal evi vlan-mapping 93 display system internal evi vlan-status 94 display system internal evi-link data 94 display system internal eviisis status 95 display system internal evpn statistics 95 display system internal ha service 95 ii

8 display system internal ha service-group 96 display system internal ha statistics 96 display system internal igmp group standby 97 display system internal igmp interface standby 98 display system internal info-center 99 display system internal inspect dim-rule 99 display system internal inspect hit-statistics 100 display system internal inspect http 101 display system internal inspect memory engine ac 101 display system internal inspect memory engine mn 102 display system internal inspect memory rule 103 display system internal inspect statistic packet 103 display system internal ip address 104 display system internal ip fast-forwarding cache verbose 105 display system internal ip routing-table 105 display system internal ip routing-table acl 107 display system internal ip routing-table ip-address 108 display system internal ip routing-table prefix-list 109 display system internal ip routing-table protocol 110 display system internal ip routing-table statistics 111 display system internal ip source binding 112 display system internal ip topology 114 display system internal ip topology inactive 115 display system internal ip vpn-binding 115 display system internal ip vpn-instance 116 display system internal ip vpn-instance inactive 117 display system internal ip vpn-instance statistics 118 display system internal ipv6 address 119 display system internal ipv6 adjacent-table 120 display system internal ipv6 fast-forwarding cache verbose 120 display system internal ipv6 fast-forwarding statistics 121 display system internal ipv6 fib prefix 121 display system internal ipv6 fib prefix entry-status 122 display system internal ipv6 fib prefix ipv6-address 123 display system internal ipv6 l2-multicast fast-forwarding cache verbose 124 display system internal ipv6 l2-multicast ip forwarding verbose 124 display system internal ipv6 l2-multicast ip verbose 125 display system internal ipv6 l2-multicast ipc statistics 126 display system internal ipv6 l2-multicast mac forwarding verbose 127 display system internal ipv6 l2-multicast mac verbose 128 display system internal ipv6 l2-multicast trill-offload-table 128 display system internal ipv6 mrib interface statistics 129 display system internal ipv6 mrib mbr interface 129 display system internal ipv6 mrib mbr interface standby 130 display system internal ipv6 multicast boundary standby 131 display system internal ipv6 multicast fast-forwarding cache verbose 132 display system internal ipv6 multicast forwarding vlan reference 133 display system internal ipv6 multicast forwarding-table dummy 134 display system internal ipv6 multicast forwarding-table verbose 135 display system internal ipv6 pathmtu 136 display system internal ipv6 pbr fib 138 display system internal ipv6 pbr kernel policy 138 display system internal ipv6 pbr policy 139 display system internal ipv6 pim bsr-info standby 139 display system internal ipv6 pim c-rp standby 140 display system internal ipv6 pim interface 141 display system internal ipv6 pim neighbor standby 142 display system internal ipv6 pim routing-table standby 143 display system internal ipv6 pim rp 144 display system internal ipv6 pim thread 144 display system internal ipv6 pim thread main standby 145 display system internal ipv6 rawip 146 iii

9 display system internal ipv6 rib event attribute 146 display system internal ipv6 rib event policy 146 display system internal ipv6 rib event prefix 147 display system internal ipv6 rib event protocol 147 display system internal ipv6 rib event statistics 147 display system internal ipv6 rib instance 147 display system internal ipv6 rib log 148 display system internal ipv6 rib memory 148 display system internal ipv6 rib nib 149 display system internal ipv6 rib nib log 149 display system internal ipv6 rib prefix 150 display system internal ipv6 rib summary 151 display system internal ipv6 route-direct interface 151 display system internal ipv6 route-direct log 152 display system internal ipv6 route-static nib log 152 display system internal ipv6 routing-table 153 display system internal ipv6 routing-table acl 153 display system internal ipv6 routing-table ipv6-address 154 display system internal ipv6 routing-table prefix-list 155 display system internal ipv6 routing-table protocol 156 display system internal ipv6 routing-table statistics 156 display system internal ipv6 source binding 157 display system internal ipv6 tcp 158 display system internal ipv6 tcp port-info 159 display system internal ipv6 tcp-proxy verbose 159 display system internal ipv6 udp 160 display system internal ipv6 udp port-info 161 display system internal irf global 161 display system internal irf msg 162 display system internal irf roledb 162 display system internal irf topodb 163 display system internal isis import-route 163 display system internal isis import-route ipv6 164 display system internal isis interface 165 display system internal isis interface ipv6 165 display system internal isis interface standby 166 display system internal isis keychain 167 display system internal isis link-state 167 display system internal isis lsdb standby 168 display system internal isis nib 169 display system internal isis nib ipv6 169 display system internal isis nib log 170 display system internal isis peer standby 170 display system internal isis prefix 171 display system internal isis prefix ipv6 172 display system internal isis standby 173 display system internal isis status 174 display system internal kernel memory dump 174 display system internal kernel memory pool 175 display system internal l2-multicast fast-forwarding cache verbose 176 display system internal l2-multicast ip forwarding verbose 177 display system internal l2-multicast ip verbose 178 display system internal l2-multicast ipc statistics 179 display system internal l2-multicast mac forwarding verbose 179 display system internal l2-multicast mac verbose 180 display system internal l2-multicast trill-offload-table 181 display system internal l2vpn l2vfib record 181 display system internal l2vpn l2vfib statistics 182 display system internal l2vpn ldp 183 display system internal license buffer-data 185 display system internal license feature-set 185 display system internal license fifo 186 iv

10 display system internal license lipc 187 display system internal license lipc hash 188 display system internal license lmi-paa 189 display system internal link-aggregation global 190 display system internal link-aggregation interface 190 display system internal lipc dump 192 display system internal lipc dump configuration 192 display system internal lipc history 193 display system internal lipc lcmp statistics 193 display system internal lipc lgmp group 194 display system internal lipc lgmp group-list 194 display system internal lipc lgmp physical-group 195 display system internal lipc lgmp physical-group-list 195 display system internal lipc lgmp statistics 196 display system internal lipc lip statistics 196 display system internal lipc loop statistics 197 display system internal lipc mtcp group 197 display system internal lipc mtcp group all 198 display system internal lipc mtcp performance 199 display system internal lipc mtcp statistics 199 display system internal lipc pcb mbuf statistics 200 display system internal lipc pcb statistics 200 display system internal lipc physical 201 display system internal lipc publish global-cb 201 display system internal lipc publish statistics 202 display system internal lipc stcp event 202 display system internal lipc stcp global-server 203 display system internal lipc stcp links 204 display system internal lipc stcp performance 204 display system internal lipc stcp port 205 display system internal lipc stcp statistics 206 display system internal lipc stcp status 206 display system internal lipc stream 207 display system internal lipc sudp pcb-info 207 display system internal lipc sudp statistics 208 display system internal lipc sudp { global-port local-port } 209 display system internal lipc topology history 209 display system internal lipc topology link 210 display system internal lipc topology node 210 display system internal lipc topology process-time 211 display system internal lipc topology statistics 211 display system internal lipc topology status 212 display system internal lisp forwarding ipv4 database 212 display system internal lisp forwarding ipv4 dynamic-eid 213 display system internal lisp forwarding ipv4 map-cache 214 display system internal lisp forwarding ipv4 roaming-host 214 display system internal lisp forwarding mobile-interface 215 display system internal lisp forwarding running-status 216 display system internal lisp forwarding statistics 216 display system internal lisp forwarding tunnel 217 display system internal lisp forwarding vrf-mapping 217 display system internal lisp nib 218 display system internal lisp nib log 218 display system internal lisp nsr backup-tunnel-mapping 219 display system internal lisp nsr no-cache 220 display system internal lisp nsr status 220 display system internal lisp routing-table 221 display system internal lisp statistics 221 display system internal lps 222 display system internal mac-address configuration 222 display system internal mac-address learned 223 display system internal mac-address protocol 224 v

11 display system internal mac-address statistics 225 display system internal mac-forwarding cache ip verbose 225 display system internal mac-forwarding cache ipv6 verbose 226 display system internal mac-forwarding controlblock 227 display system internal mbuf relay statistics 227 display system internal mld group standby 228 display system internal mld interface standby 229 display system internal mpls forwarding temporary-ilm 230 display system internal mpls lfib ilm 231 display system internal mpls lfib nhlfe 232 display system internal mpls lfib nhlfe reflist 233 display system internal mpls lfib record 234 display system internal mpls lfib statistics 235 display system internal mpls lsp-pending 236 display system internal mpls protection statistics 236 display system internal mpls statistics 237 display system internal mpls te pce path-computation 237 display system internal mrib interface statistics 238 display system internal mrib mbr 238 display system internal mrib mbr interface standby 239 display system internal mtr-policy 240 display system internal multicast boundary standby 241 display system internal multicast capability 242 display system internal multicast fast-forwarding cache verbose 242 display system internal multicast forwarding vlan reference 243 display system internal multicast forwarding-table dummy 244 display system internal multicast forwarding-table verbose 245 display system internal multicast record 246 display system internal nat 248 display system internal nat aging-queue 249 display system internal nat statistics 250 display system internal nd dad 250 display system internal nd entry 251 display system internal nd ifcb 251 display system internal nd machash 252 display system internal nd probe 253 display system internal nd rbhash 253 display system internal nd reload 254 display system internal nd rule 254 display system internal nd static 255 display system internal nd statistics 255 display system internal nd suppression xconnect-group verbose 256 display system internal object-group 257 display system internal object-policy 258 display system internal openflow cache 258 display system internal openflow instance 259 display system internal ospf event-log 259 display system internal ospf event-log router-id 260 display system internal ospf flood-list 260 display system internal ospf interface 261 display system internal ospf interface standby 261 display system internal ospf keychain 262 display system internal ospf link-state 263 display system internal ospf lsdb 263 display system internal ospf lsdb standby 264 display system internal ospf nib 265 display system internal ospf peer standby 265 display system internal ospf peer statistics standby 267 display system internal ospf prefix 268 display system internal ospf router 268 display system internal ospf sham-link standby 268 display system internal ospf statistics 270 vi

12 display system internal ospf status 270 display system internal ospf vlink standby 270 display system internal ospfv3 event-log 271 display system internal ospfv3 flood-list 272 display system internal ospfv3 interface 272 display system internal ospfv3 interface standby 272 display system internal ospfv3 lsdb 274 display system internal ospfv3 lsdb standby 274 display system internal ospfv3 nib 276 display system internal ospfv3 peer standby 276 display system internal ospfv3 prefix 277 display system internal ospfv3 router 278 display system internal ospfv3 standby 278 display system internal ospfv3 statistics 279 display system internal ospfv3 status 280 display system internal ospfv3 vlink standby 280 display system internal overlay arp suppression 281 display system internal overlay flooding 282 display system internal overlay mac-address 282 display system internal overlay selective-flooding mac-address 284 display system internal overlaymac statistics 284 display system internal pbr fib 285 display system internal pbr kernel policy 285 display system internal pbr policy 286 display system internal pim bsr-info standby 287 display system internal pim c-rp standby 288 display system internal pim interface 289 display system internal pim neighbor standby 289 display system internal pim routing-table standby 290 display system internal pim rp 291 display system internal pim rp-info standby 292 display system internal pim thread 293 display system internal pim thread main standby 293 display system internal portal process 294 display system internal ppp statistics 294 display system internal pppoe-server statistics 295 display system internal rawip 296 display system internal rib event attribute 296 display system internal rib event policy 297 display system internal rib event prefix 297 display system internal rib event protocol 297 display system internal rib event statistics 297 display system internal rib ftn 298 display system internal rib ftn summary 298 display system internal rib instance 298 display system internal rib log 299 display system internal rib memory 299 display system internal rib nib 300 display system internal rib nib log 301 display system internal rib prefix 301 display system internal rib summary 302 display system internal rip database standby 303 display system internal rip graceful-restart event-log 304 display system internal rip interface 304 display system internal rip interface standby 305 display system internal rip neighbor standby 306 display system internal rip nib 307 display system internal rip nib log 307 display system internal rip non-stop-routing event-log 307 display system internal rip route standby 308 display system internal rip status 309 display system internal ripng database standby 310 vii

13 display system internal ripng graceful-restart event-log 311 display system internal ripng interface 311 display system internal ripng interface standby 312 display system internal ripng neighbor standby 313 display system internal ripng nib 314 display system internal ripng nib log 314 display system internal ripng non-stop-routing event-log 314 display system internal ripng route standby 315 display system internal ripng status 316 display system internal route-direct interface 317 display system internal route-direct log 317 display system internal route-static nib log 317 display system internal session 318 display system internal session aging-queue 318 display system internal session alg-exception 319 display system internal session relation-table ipv4 320 display system internal session relation-table ipv6 321 display system internal session statistics 322 display system internal session table ipv4 323 display system internal session table ipv6 324 display system internal sflow statistics 324 display system internal startup cache 326 display system internal stp bridge-info 326 display system internal stp port-info 327 display system internal stp stg-state 327 display system internal tcp 328 display system internal tcp port-info 328 display system internal tcp-proxy statistics 329 display system internal tcp-proxy statistics 330 display system internal tcp-proxy verbose 331 display system internal tunnel data 332 display system internal udp 333 display system internal udp port-info 333 display system internal userlog mbuf dump 334 display system internal userlog statistic 335 display system internal userlog test 336 display system internal virtual-crypto-engine 337 display system internal virtual-crypto-engine statistics 337 display system internal vlan 338 display system internal vrrp ipv6 kernel 338 display system internal vrrp kernel 339 display system internal vxlan forwarding tunnel 340 display system internal vxlan isis status 340 display system internal wips statistics 341 display system internal wlan ac capability 341 display system internal wlan adapter-asyncinfo 342 display system internal wlan ap message 343 display system internal wlan ap name 343 display system internal wlan ap name map-configuration 344 display system internal wlan ap radio drv-info 345 display system internal wlan ap reboot history 346 display system internal wlan ap-group-configuration 347 display system internal wlan ap-libinfo 347 display system internal wlan ap-model-configuration 348 display system internal wlan apdb 349 display system internal wlan application connection 350 display system internal wlan backup-ap 350 display system internal wlan band-navigation 351 display system internal wlan client ip 352 display system internal wlan client kernel struct-memory 353 display system internal wlan client statistics mac-address 353 display system internal wlan command-cache 354 viii

14 display system internal wlan ctrl-ap 355 display system internal wlan history bandwidth 356 display system internal wlan history wlanid 356 display system internal wlan history-error 357 display system internal wlan kernel-ap 358 display system internal wlan link-info 359 display system internal wlan load-balance neighbor-list ap 360 display system internal wlan load-balance neighbor-list client 360 display system internal wlan response-timeout event 360 display system internal wlan statistics 361 display transceiver information interface 362 display transceiver moduleinfo 362 display transceiver register 363 F 363 fips kdf ssh 363 follow 363 L 364 l2vpn l2vfib record size 364 license check-timer 365 license file-timer 367 lipc connection detect 368 lipc dump 368 lipc dump buffer 369 lipc dump enable 370 lipc dump offset 371 lipc dump-port 372 lipc performance 373 lipc ping 373 lipc timeout 374 list 375 M 375 memory boundary-check enable 375 memory boundary-check scan 376 monitor lipc 377 mpls lfib record size 378 mpls te path-calculation 379 multicast record limit 380 P 381 probe 381 R 381 reset system internal adj4 statistics 381 reset system internal adj6 statistics 382 reset system internal arp statistics 383 reset system internal aspf statistics 383 reset system internal bgp link-state 384 reset system internal bgp log 384 reset system internal bgpm log 385 reset system internal client-verify statistics (for interface) 386 reset system internal control-plane statistics 386 reset system internal evpn statistics 387 reset system internal inspect hit-statistics 387 reset system internal inspect http 387 reset system internal ip routing-table statistics protocol 388 reset system internal ipv6 fast-forwarding statistics 389 reset system internal ipv6 multicast forwarding-table dummy 390 reset system internal ipv6 rib log 391 reset system internal ipv6 rib nib log 391 reset system internal ipv6 rib summary 392 reset system internal ipv6 route-direct log 392 reset system internal ipv6 route-static nib log 393 reset system internal ipv6 routing-table statistics protocol 393 reset system internal irf msg 393 ix

15 reset system internal isis link-state 394 reset system internal l2vpn l2vfib record 394 reset system internal lipc dump buffer 395 reset system internal lisp forwarding statistics 396 reset system internal lisp statistics 396 reset system internal mac-address statistics 397 reset system internal mbuf relay statistics 397 reset system internal mpls lfib record 398 reset system internal multicast forwarding-table dummy 399 reset system internal multicast record 400 reset system internal nat statistics 400 reset system internal nd statistics 400 reset system internal openflow cache 402 reset system internal ospf event-log 402 reset system internal ospf link-state statistics 402 reset system internal overlaymac statistics 403 reset system internal ppp statistics 403 reset system internal pppoe-server statistics 404 reset system internal rib log 405 reset system internal rib nib log 405 reset system internal rib summary 406 reset system internal rip graceful-restart event-log 406 reset system internal rip non-stop-routing event-log 407 reset system internal ripng graceful-restart event-log 408 reset system internal ripng non-stop-routing event-log 408 reset system internal route-direct log 409 reset system internal route-static nib log 410 reset system internal session alg statistics 410 reset system internal session statistics 410 reset system internal sflow statistics 411 reset system internal tcp-proxy statistics 412 reset system internal tcp-proxy statistics 413 reset system internal virtual-crypto-engine statistics 413 reset system internal wlan history bandwidth 414 reset system internal wlan history wlanid 415 reset system internal wlan history-error 416 reset system internal wlan response-timeout event 417 S 417 system internal session alg statistics 417 T 418 tcp-proxy statistics 418 tcp-proxy statistics 420 V 420 view 420 W 421 waas tfo auto-discovery blacklist 421 wips fix-channel-scan 422 wlan ap queue message-type-count interval 422 wlan ap-execute exec-console enable 423 wlan image-load model 424 wlan image-load simultaneous 425 wlan system internal ap adjust radio enable 426 wlan system internal ap adjust reboot enable 427 wlan system internal offline-restrain 428 wlan system internal reboot-restrain 429 Index 430 x

16 Probe commands C The commands in this book are designed only for developers to debug software. cloud-management local-port Use cloud-management local-port to specify the TCP port number used to establish cloud connections. Use undo cloud-management local-port to restore the default. cloud-management local-port port-number undo cloud-management local-port Default TCP port number 443 is used to establish cloud connections. port-number: Specifies a TCP port number in the range of 1 to Usage guidelines This command is used for communication with the test server and commissioning. The device does not save the port number configuration. After the device restarts, it uses the default port number to establish cloud connections. crypto-engine accelerator disable Use crypto-engine accelerator disable to disable hardware crypto engines. Use undo crypto-engine accelerator disable to enable hardware crypto engines. crypto-engine accelerator disable undo crypto-engine accelerator disable Default Hardware crypto engines are enabled. 1

17 Usage guidelines D By default, hardware crypto engines are enabled. You can use the crypto-engine accelerator disable command to disable them globally. However, disabling hardware crypto engines can degrade the encryption or decryption performance. As a best practice, disable hardware crypto engines except for testing, debugging, or troubleshooting purposes. Enabling or disabling hardware crypto engines affects different service modules differently. For example, for IPsec services, enabling or disabling hardware crypto engines affects only newly established IPsec SAs. The existing IPsec SAs still use the previously selected crypto engine for data encryption. As a best practice, use the reset ipsec sa command to delete all existing IPsec SAs before enabling or disabling hardware crypto engines. debugging ha Default Use debugging ha to enable HA submodule debugging. Use undo debugging ha to disable HA submodule debugging. debugging ha { all config fsm policy standby sync } undo debugging ha { all config fsm policy standby sync } HA submodule debugging is disabled. User view all: Specifies debugging for all HA submodules. config: Specifies config submodule debugging. fsm: Specifies FSM submodule debugging. policy: Specifies policy submodule debugging. standby: Specifies backup HA submodule debugging. sync: Specifies sync submodule debugging. debugging lipc Use debugging lipc to enable debugging for LIPC. Use undo debugging lipc to restore the default. debugging lipc { detail dump port lgmp mbuf mtcp pub stcp stream topo } [ lip lip ] undo debugging lipc { detail dump port lgmp mbuf mtcp pub stcp stream topo stream } [ lip lip ] 2

18 Default Debugging is disabled for LIPC. detail: Enables detailed debugging. dump port: Specifies a port number in the range of 0 to lgmp: Enables debugging for the LIPC LGMP module. mbuf: Enables debugging for the LIPC MBUF module. mtcp: Enables debugging for the LIPC MTCP module. pub: Enables debugging for the LIPC PUB module. stcp: Enables debugging for the LIPC STCP module. stream: Enables debugging for the LIPC STREAM module. topo: Enables debugging for the LIPC TOPO module. lip lip: Specifies a remote node by its ID in the range of 0 to The device has only one node 0. You do not need to specify this option. (Centralized devices in standalone mode.) lip lip: Specifies a remote node by its ID in the range of 0 to If you do not specify a remote node, this command enables LIPC debugging for the node where the MPU resides. (Distributed devices in standalone mode.) lip lip: Specifies a remote node by its ID in the range of 0 to If you do not specify a remote node, this command enables LIPC debugging for the node where the master device resides. (Centralized devices in IRF mode.) lip lip: Specifies a remote node by its ID in the range of 0 to If you do not specify a remote node, this command enables LIPC debugging for the node where the global active MPU resides. (Distributed devices in IRF mode.) debugging lipc mtcp Use debugging lipc mtcp to enable debugging for the LIPC MTCP module. Use undo debugging lipc mtcp to restore the default. debugging lipc mtcp [ group group-id ] [ lip lip ] undo debugging lipc mtcp [ group group-id ] [ lip lip ] Default Debugging is disabled for the LIPC MTCP module. 3

19 group group-id: Specifies a multicast group by its group port in the range of 0 to If you do not specify a multicast group, the command enables LIPC MTCP debugging for all multicast groups. lip lip: Specifies a remote node by its ID in the range of 0 to The device has only one node 0. You do not need to specify this option. (Centralized devices in standalone mode.) lip lip: Specifies a remote node by its ID in the range of 0 to If you do not specify a remote node, this command enables LIPC MTCP debugging for the node where the MPU resides. (Distributed devices in standalone mode.) lip lip: Specifies a remote node by its ID in the range of 0 to If you do not specify a remote node, this command enables LIPC MTCP debugging for the node where the master device resides. (Centralized devices in IRF mode.) lip lip: Specifies a remote node by its ID in the range of 0 to If you do not specify a remote node, this command enables LIPC MTCP debugging for the node where the global active MPU resides. (Distributed devices in IRF mode.) debugging lipc stcp Default Use debugging lipc stcp to enable debugging for the LIPC STCP module. Use undo debugging lipc stcp to restore the default. debugging lipc stcp [ port port1 [ port port2 ] ] [ lip lip ] undo debugging lipc stcp [ port port1 [ port port2 ] ] [ lip lip ] Debugging is disabled for the LIPC STCP module. port port1 [ port port2 ]: Specifies one or multiple LIPC connections. The port1 and port2 arguments represent the local port and the remote port of an LIPC connection, respectively. The value range for the two arguments is 0 to 65535, and the default is 0. lip lip: Specifies a remote node by its ID in the range of 0 to The device has only one node 0. You do not need to specify this option. (Centralized devices in standalone mode.) lip lip: Specifies a remote node by its ID in the range of 0 to If you do not specify a remote node, this command enables LIPC STCP debugging for the node where the MPU resides. (Distributed devices in standalone mode.) lip lip: Specifies a remote node by its ID in the range of 0 to If you do not specify a remote node, this command enables LIPC STCP debugging for the node where the master device resides. (Centralized devices in IRF mode.) lip lip: Specifies a remote node by its ID in the range of 0 to If you do not specify a remote node, this command enables LIPC STCP debugging for the node where the global active MPU resides. (Distributed devices in IRF mode.) 4

20 debugging system internal adj4 Use debugging system internal adj4 to enable IPv4 adjacency table debugging. Use undo debugging system internal adj4 to disable IPv4 adjacency table debugging. debugging system internal adj4 { hardware bind notify entry } undo debugging system internal adj4 { hardware bind notify entry } Default IPv4 adjacency table debugging is disabled. hardware: Specifies hardware debugging for the IPv4 adjacency table. bind: Specifies VN/NHLFE binding debugging for the IPv4 adjacency table. notify: Specifies notification debugging for VN/NHLFE binding update in the IPv4 adjacency table. entry: Specifies entry debugging for the IPv4 adjacency table. debugging system internal adj6 Use debugging system internal adj6 to enable IPv6 adjacency table debugging. Use undo debugging system internal adj6 to disable IPv6 adjacency table debugging. debugging system internal adj6 { hardware bind notify entry } undo debugging system internal adj6 { hardware bind notify entry } Default IPv6 adjacency table debugging is disabled. hardware: Specifies hardware debugging for the IPv6 adjacency table. bind: Specifies VN/NHLFE binding debugging for the IPv6 adjacency table. notify: Specifies notification debugging for VN/NHLFE binding update in the IPv6 adjacency table. entry: Specifies entry debugging for the IPv6 adjacency table. 5

21 debugging system internal arp event Use debugging system internal arp event to enable ARP event debugging. Use undo debugging system internal arp event to disable ARP event debugging. debugging system internal arp event undo debugging system internal arp event Default ARP event debugging is disabled. debugging system internal arp features Use debugging system internal arp features to enable ARP features debugging. Use undo debugging system internal arp features to disable ARP features debugging. debugging system internal arp features { notify packet } undo debugging system internal arp features { notify packet } Default ARP features debugging is disabled. notify: Enables notification debugging for ARP features. packet: Enables packet debugging for ARP features. debugging system internal arp notify Default Use debugging system internal arp notify to enable ARP notification debugging. Use undo debugging system internal arp notify to disable ARP notification debugging. debugging system internal arp notify undo debugging system internal arp notify ARP notification debugging is disabled. 6

22 debugging system internal arp sync Use debugging system internal arp sync to enable ARP synchronization debugging. Use undo debugging system internal arp sync to disable ARP synchronization debugging. debugging system internal arp sync undo debugging system internal arp sync Default ARP synchronization debugging is disabled. debugging system internal igmp-snooping fsm tracing Default Use debugging system internal igmp-snooping fsm tracing to enable trace log debugging for the IGMP snooping state machine. Use undo debugging system internal igmp-snooping fsm tracing to disable trace log debugging for the IGMP snooping state machine. debugging system internal igmp-snooping fsm tracing [ vlan vlan-id [ group-address source-address ] ] undo debugging system internal igmp-snooping fsm tracing debugging system internal igmp-snooping fsm tracing [ vlan vlan-id [ group-address source-address ] ] [ slot slot-number ] undo debugging system internal igmp-snooping fsm tracing debugging system internal igmp-snooping fsm tracing [ vlan vlan-id [ group-address source-address ] ] [ chassis chassis-number slot slot-number ] undo debugging system internal igmp-snooping fsm tracing Trace log debugging is disabled for the IGMP snooping state machine. 7

23 Predefined user role vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to If you do not specify a VLAN, this command outputs trace logs for all VLANs. group-address: Specifies a multicast group address. If you do not specify a multicast group, this command outputs trace logs for all multicast groups. source-address: Specifies a multicast source address. If you do not specify a multicast source, this command outputs trace logs for all multicast sources. slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command outputs trace logs for the MPU. (Distributed devices in standalone mode.) slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command outputs trace logs for the master device. (Centralized devices in IRF mode.) chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. If you do not specify a card, this command outputs trace logs for the global active MPU. (Distributed devices in IRF mode.) debugging system internal ip topology Use debugging system internal ip topology to enable topology debugging. Use undo debugging system internal ip topology to disable topology debugging. debugging system internal ip topology undo debugging system internal ip topology debugging system internal ip topology [ slot slot-number ] undo debugging system internal ip topology [ slot slot-number ] debugging system internal ip topology [ chassis chassis-number slot slot-number ] undo debugging system internal ip topology [ chassis chassis-number slot slot-number ] Default Topology debugging is disabled. slot slot-number: Specifies a card by its slot number. (Distributed devices in standalone mode.) slot slot-number: Specifies an IRF member device by its ID. (Centralized devices in IRF mode.) 8

24 chassis chassis-number slot slot-number: Specifies a card of an IRF member device. The chassis-number argument represents the ID of the IRF member device. The slot-number argument represents the number of the slot that holds the card. If you do not specify this option, the command enables topology debugging for the global active MPU. (Distributed devices in IRF mode.) Usage guidelines The following matrix shows the command and hardware compatibility: Hardware MSR810/810-W/810-W-DB/810-LM/810-W-LM/ PoE /810-LM-HK/810-W-LM-HK MSR810-LMS/810-LUS MSR X1/ X1 MSR 2630 MSR / MSR SI/ SI MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC MSR 3610/3620/3620-DP/3640/3660 MSR5620/5660/5680 Command compatibility debugging system internal ip vpn-instance Use debugging system internal ip vpn-instance to enable VPN instance debugging. Use undo debugging system internal ip vpn-instance to disable VPN instance debugging. debugging system internal ip vpn-instance undo debugging system internal ip vpn-instance debugging system internal ip vpn-instance slot slot-number undo debugging system internal ip vpn-instance slot slot-number debugging system internal ip vpn-instance chassis chassis-number slot slot-number undo debugging system internal ip vpn-instance chassis chassis-number slot slot-number Default VPN instance debugging is disabled. slot slot-number: Specifies a card by its slot number. (Distributed devices in standalone mode.) 9

25 slot slot-number: Specifies an IRF member device by its member ID. (Centralized devices in IRF mode.) chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. (Distributed devices in IRF mode.) Usage guidelines The following matrix shows the command and hardware compatibility: Hardware MSR810/810-W/810-W-DB/810-LM/810-W-LM/ PoE /810-LM-HK/810-W-LM-HK/810-LMS/810-LUS MSR X1/ X1 MSR 2630 MSR / MSR SI/ SI MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC MSR 3610/3620/3620-DP/3640/3660 MSR5620/5660/5680 Command compatibility debugging system internal ipv6 fib prefix Use debugging system internal ipv6 fib prefix to enable IPv6 FIB prefix debugging. Use undo debugging system internal ipv6 fib prefix to disable IPv6 FIB prefix debugging. debugging system internal ipv6 fib prefix { all message hardware } undo debugging system internal ipv6 fib prefix { all message hardware } debugging system internal ipv6 fib prefix { all message hardware } slot slot-number undo debugging system internal ipv6 fib prefix { all message hardware } slot slot-number debugging system internal ipv6 fib prefix { all message hardware } chassis chassis-number slot slot-number undo debugging system internal ipv6 fib prefix { all message hardware } chassis chassis-number slot slot-number Default IPv6 FIB prefix debugging is disabled. 10

26 all: Enables all types of IPv6 FIB prefix debugging. message: Enables IPv6 FIB prefix message debugging. If you specify this keyword, the system displays the IPv6 FIB prefix obtained from the routing table or synchronized from other cards or devices. hardware: Enables IPv6 FIB prefix hardware debugging. If you specify this keyword, the system displays the FIB6 information issued to the driver, and the returned FIB6 information from the driver. slot slot-number: Specifies a card by its slot number. (Distributed devices in standalone mode.) slot slot-number: Specifies an IRF member device by its member ID. (Centralized devices in IRF mode.) chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument specifies the member ID of the IRF member device. The slot-number argument specifies the slot number of the card. (Distributed devices in IRF mode.) debugging system internal l2vpn l2vfib Use debugging system internal l2vpn l2vfib to enable L2VPN L2VFIB debugging. Use undo debugging system internal l2vpn l2vfib to disable L2VPN L2VFIB debugging. debugging system internal l2vpn l2vfib { ac all config lpw sync } undo debugging system internal l2vpn l2vfib { ac all config lpw sync } debugging system internal l2vpn l2vfib { ac all config lpw sync } slot slot-number undo debugging system internal l2vpn l2vfib { ac all config lpw sync } slot slot-number debugging system internal l2vpn l2vfib { ac all config lpw sync } chassis chassis-number slot slot-number undo debugging system internal l2vpn l2vfib { ac all config lpw sync } chassis chassis-number slot slot-number Default L2VPN L2VFIB debugging is disabled. ac: Specifies L2VPN L2VFIB AC debugging. all: Specifies all types of L2VPN L2VFIB debugging. config: Specifies L2VPN L2VFIB configuration debugging. lpw: Specifies L2VPN L2VFIB LPW debugging. sync: Specifies L2VPN L2VFIB synchronization debugging. 11

27 slot slot-number: Specifies a card by its slot number. (Distributed devices in standalone mode.) slot slot-number: Specifies an IRF member device by its member ID. (Centralized devices in IRF mode.) chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. (Distributed devices in IRF mode.) Usage guidelines The following matrix shows the command and hardware compatibility: Hardware MSR810/810-W/810-W-DB/810-LM/810-W-LM/ PoE /810-LM-HK/810-W-LM-HK/810-LMS/810-LUS MSR X1/ X1 MSR 2630 MSR / MSR SI/ SI MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC MSR 3610/3620/3620-DP/3640/3660 MSR5620/5660/5680 Command compatibility debugging system internal lisp database Use debugging system internal lisp database to enable LISP database debugging. Use undo debugging system internal lisp database to disable LISP database debugging. debugging system internal lisp database [ hardware message ] undo debugging system internal lisp database [ hardware message ] Default LISP database debugging is disabled. hardward: Enables hardware debugging. message: Enables database message debugging. debugging system internal lisp forward Use debugging system internal lisp forward to enable LISP forwarding debugging. Use undo debugging system internal lisp forward to disable LISP forwarding debugging. 12