H3C Intelligent Management Center v7.3

Transcription

1 H3C Intelligent Management Center v7.3 inode Installation Guide (Windows) New H3C Technologies Co., Ltd. Software version: inode PC 7.3 (E0511) Document version: 5PW

2 Copyright , New H3C Technologies Co., Ltd. and its licensors All rights reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd. Trademarks H3C,, H3CS, H3CIE, H3CNE, Aolynk,, H 3 Care,, IRF, NetPilot, Netflow, SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of New H3C Technologies Co., Ltd. All other trademarks that may be mentioned in this manual are the property of their respective owners Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

3 Preface The H3C inode Installation Guide (Windows) includes 5 chapters, which describe how to install, operate, and uninstall the inode client. This preface includes the following topics about the documentation: Audience Conventions Obtaining documentation Technical support Documentation feedback Audience This documentation is intended for: Network planners. Field technical support and servicing engineers. Network administrators working with the H3C IMC. Conventions The following information describes the conventions used in the documentation. Port numbering in examples The port numbers in the documentation are for illustration only and might be unavailable on your device. Command conventions Convention Boldface Italic Description Bold text represents commands and keywords that you enter literally as shown. Italic text represents arguments that you replace with actual values. # A line that starts with a pound (#) sign is comments. GUI conventions Convention Boldface > Description Window names, button names, field names, and menu items are in Boldface. For example, the New User window opens; click OK. Multi-level menus are separated by angle brackets. For example, File > Create > Folder. Symbols Convention WARNING! Description An alert that calls attention to important information that if not understood or followed can result in personal injury.

4 Convention CAUTION: IMPORTANT: NOTE: TIP: Description An alert that calls attention to important information that if not understood or followed can result in data loss, data corruption, or damage to hardware or software. An alert that calls attention to essential information. An alert that contains additional or supplementary information. An alert that provides helpful information. Obtaining documentation To access the most up-to-date H3C product documentation, go to the H3C website at To obtain information about installation, configuration, and maintenance, click To obtain software version information such as release notes, click Technical support Documentation feedback You can your comments about product documentation to We appreciate your comments.

5 Contents Overview 1 Installing the inode client 2 Supported Windows operating systems 2 Installing the inode client 2 Using the inode client for authentication 8 Starting the inode client 8 Using the inode client for portal authentication 9 Using the predefined portal connection for authentication 9 Creating a portal connection for authentication 13 Uninstalling the inode client 20 FAQ 22 i

6 Overview The inode intelligent client (inode client) is client access software for Windows users. It works with IMC EIA and EAD Security Policy to authenticate and check the security of access users. The inode client supports the following protocols for user authentication: 802.1X Portal SSL VPN Wireless Protocol L2TP/IPsec VPN This document describes how to install, operate, and uninstall the inode client. 1

7 Installing the inode client Supported Windows operating systems The following Windows operating systems support the inode client: Windows XP Windows Server 2003 Windows Vista Windows 7 Windows 8 Windows 10 Installing the inode client The inode client installation supports the.exe and.msi installation programs. The.msi installation program applies to the following scenarios: Centrally distribute the installation program of the inode client to PCs through a domain controller. Make sure the Silent installation option is selected for the.msi installation program. H3C recommends that you select the Enable automatic reboot function option in the basic functions when customizing the installation program in the inode management center. Users with administrator privileges execute the msiexec command to install or uninstall the inode client. This example describes how to install the inode client on Windows 7. The inode client can be installed on other Windows operating systems in a similar way. To install the inode client: 1. Launch the installation wizard. a. Consult with the administrator to obtain the inode client installation program. b. Log in to the Windows operating system as administrator. c. Double-click the setup program to launch the installation wizard, as shown in Figure 1. d. Click Next. 2

8 Figure 1 Launching the installation wizard 2. Select I accept the terms of the license agreement and then click Next, as shown in Figure 2. Figure 2 Accepting the license agreement 3

9 3. Select the installation path, and then click Next. By default, the inode client is installed in the directory C:\Program Files\iNode\iNode Client, as shown in Figure 3. NOTE: The inode client installation path can contain letters, numbers, and special characters except the slash (/), backslash (\), colon (:), asterisk (*), question mark (?), quotation marks ("), left angle bracket (<), right angle bracket (>), and vertical bar ( ). Figure 3 Using the default destination location Or, click Change to select another installation path, as shown in Figure 4. 4

10 Figure 4 Changing the installation path 4. Click Install to start installing the inode client, as shown in Figure 5. Figure 5 Starting installation The Setup Status page shows the installation progress, as shown in Figure 6. 5

11 Figure 6 Setup Status page 5. Select an option as needed and click Finish. This example uses the Yes, I want to restart my computer now option, as shown in Figure 7. Figure 7 InstallShield Wizard Complete page 6

12 6. Restart your computer. 7

13 Using the inode client for authentication Starting the inode client Use one of the following methods to start the inode client: Double-click the inode client shortcut icon on your desktop. From the Start menu, select All Programs > inode > inode Intelligent Client > inode Intelligent Client. The path varies based on the operating system version and style settings. Figure 8 shows the main window of the inode client that contains the following connections customized by the inode management center: Portal connection 802.1X connection SSL VPN connection Wireless connection L2TP/IPsec VPN connection 8

14 Figure 8 inode Intelligent Client Using the inode client for portal authentication Using the predefined portal connection for authentication 1. In the inode intelligent client, click Portal Connection to expand the Portal Connection area, as shown in Figure 9. 9

15 Figure 9 Portal authentication 2. Click the Refresh icon next to the Server field, as shown in Figure

16 Figure 10 Expanded portal connection area The inode client automatically searches for the portal server. When the portal server is found, the portal authentication settings window appears. 3. Configure the following parameters, as shown in Figure 11: a. Enter a user name in the Username field. b. Enter the password in the Password field c. Select a service type from the Service type list. 11

17 Figure 11 Portal authentication settings 4. Click Connect. When the user passes portal authentication, the authentication result window appears, as shown in Figure

18 Figure 12 Portal authentication result Creating a portal connection for authentication If the inode client does not have a predefined portal connection, create a portal connection for authentication. To create a portal connection: 1. In the inode client, click the Management icon, as shown in Figure

19 Figure 13 inode Intelligent Client 2. On the page for configuring inode scenarios, click New, as shown in Figure

20 Figure 14 Scenario configuration page 3. On the page for adding a scenario, enter a scenario name and double click Portal Connection, as shown in Figure

21 Figure 15 Adding a scenario 4. On the Select connection type page, select Common for Connection Type and IPv4 for Select the IP protocol version, as shown in Figure

22 Figure 16 Selecting a connection type 5. Click Next. The Account Information page appears. 6. Configure the following parameters, as shown in Figure 17. Use the IP address that is automatically populated in the Server field. Enter a username in the Username field. Enter the password in the Password field. Select a service type from the Service type list. Use the default values for other parameters. 17

23 Figure 17 Account Information page 7. Click OK. A portal connection is created and identified by in Figure 18. on the Management page, as shown 18

24 Figure 18 Management page 8. Click Save. The My New Scenario area appears on the Scenarios tab. 9. Use one of the following methods to trigger portal authentication: Double-click the portal connection icon in My New Scenario. Click the Network Access icon on top of the page. On the authentication page, click the Refresh icon next to the Server field to obtain the address of the portal server, configure the username, password, and service type, and click Connect. 19

25 Uninstalling the inode client 1. From the Start menu, select All Programs > inode > inode Intelligent Client > Repair or Uninstall inode Intelligent Client. 2. Select Remove, and then click Next, as shown in Figure 19. A confirmation dialog box appears. Figure 19 Uninstalling the inode client 3. Click Yes, as shown in Figure 20. Figure 20 Confirming the uninstall 4. In the message dialog box shown in Figure 21, click Yes. H3C recommends that you save the connections and configuration if you plan to reinstall the inode client in the future. 20

26 Figure 21 Saving connections and configuration 5. Select an option as needed and click Finish. This example uses the Yes, I want to restart my computer now option, as shown in Figure 22. Figure 22 Completing the removal 21

27 FAQ What is the difference between installing an inode client in Windows Vista or Windows 7 or Windows 8 and installing in Windows XP? When you install the inode client in Windows Vista or Windows 7 or Windows 8 with User Account Control enabled, the User Account Control dialog box might appear. Click Yes to continue with the installation process. Figure 23 User Account Control dialog box 22