ENGLISH KNXCONVERTER PARLEZ VOUS ASCII?
|
|
- Cody Carter
- 5 years ago
- Views:
Transcription
1 ENGLISH PARLEZ VOUS ASCII?
2 PARLEZ VOUS ASCII? Included KNX IP router functionality The converts KNX telegrams into ASCII code and vice versa. It makes it easy to integrate third-party applications. The device sends the data via TCP, UDP (unicast or multicast) as well as HTTP. Thanks to the simple structure of the protocol (ASCII commands), the integration is as simple as possible. A KNX/TP connection and the integrated KNXnet/IP server provide the connection to KNX. The number of data points is unlimited. The values of all group addresses are stored in an address state table which can be read by third-party applications. Different KNX worlds with the same group addresses can be distinguished by a system ID. The upload of ETS4 and ETS5 project data simplifies the creation of ASCII commands by using identifiers and data types. In addition, the can also be used as a programming interface for the ETS. You configure this device platform-independently via a web interface.
3 FASCINATNG TECHNOLOGY ALL ADVANTAGES IN DETAIL BIDIRECTIONAL TRANSLATION. The translates KNX telegrams into a simple ASCII protocol ( protocol) and vice versa. Easily integrate non-knx systems without detailed knowledge of the KNX protocol. Use either TCP or UDP to configure individual solutions. SIMPLE AND EFFICIENT. ASCII is one of the best known and most common encodings. It is used by the protocol to simplify the control of KNX systems. Instead of having to implement the complete KNX protocol, ETS4 and ETS5 project export on the application side simply work with the corresponding identifiers. The integrated address status table enables third party applications to get an immediate overview of the status of the KNX system at startup. UNLIMITED DATA POINTS. Use the in simple installations or in large projects. Due to the unlimited number of data points, this module, which is only four division units in size, meets almost all requirements. Thanks to the integrated KNXnet/IP server, the can be placed not only directly on the KNX line (KNX/ TP interface) but also on the TCP/IP-based main or area line. ADDED VALUES FOR YOUR CUSTOMERS. With the help of the, which can also be used as an IP router and programming interface for the ETS, the advantages of different systems can be easily combined. In this way, you create new added value for your customers while simultaneously optimizing costs.
4 PRODUCT USAGE IN USE KNX/TP LAN 3rd party device protocol (TCP/UDP/HTTTP) Heating Actuator Weather station is connected to the Twisted Pair Bus as an additional KNX device. After implementation of the protocol, the third party application communicates bi-directionally with the via the network (TCP, UDP, or HTTP), giving the third party application full access to the KNX system and vice versa.
5 KNXNET/IP Third-party manufacturer protocol (TCP/UDP/HTTP) LAN IP-Router IP-Router KNX KNX KNX In larger installations, the replaces an IP router with its integrated KNXnet/IP server. With the help of the protocol, third-party applications are connected bidirectionally to the complete system. In this way, the advantages of both worlds are ideally combined with little extra effort.
6 OVERVIEW TECHNICAL SPECIFICATIONS Operating voltage: V DC Typical power consumption 300 ma at 12 V DC Power consumption: <= 5 W Connection: screw-type plug-in terminal Climate resistant: EN Ambient temperature: 5 to + 35 C Relative humidity (non-condensing): 5 % to 80 %. Mechanical data: Mounting: MDRC 4 MW Dimensions (W x H x D) in mm: 72 x 90 x 63 Housing: Plastic Protection class: IP20 (according to EN 60529) Interfaces: KNX via screw terminal (Twisted Pair) Ethernet via RJ45 socket Special features: address status table ETS4/5 project data import Communication via TCP, UDP, and HTTP Software requirements: Operating system: independent Communication: Network interface Current browsers (Chrome, Firefox, Safari) Art. no The information in the flyer refers to the current production status of the devices. We reserve the right to make technical and design changes without prior notice. Our general terms of sale, delivery and payment apply exclusively.
7 «The makes it easier and faster than ever before to connect non-knx systems - without detailed knowledge of the KNX protocol.»
8 8.EN PR BAB TECHNOLOGIE GmbH Hörder Burgstraße Dortmund Germany Phone: Fax: Internet:
ENGLISH DATALOGGER V2 ANALYZE. CONTROL. OPTIMIZE.
ENGLISH DATALOGGER V2 ANALYZE. CONTROL. OPTIMIZE. DATALOGGER V2 ANALYZE. CONTROL. OPTIMIZE. Included KNX IP router functionality NEW in DATALOGGER: New, more powerful hardware The DATALOGGER V2 is a powerful
More informationENGLISH AUDIOMODULE MULTI-ROOM OUR WAY
ENGLISH MULTI-ROOM OUR WAY MULTI-ROOM OUR WAY The is a premium multi-room audio player which is alternatively available with a line-out or integrated amplifier. As a top hat rail device, installed in the
More informationENGLISH DUODMX GATEWAY LIGHT IT UP
ENGLISH LIGHT IT UP LIGHT IT UP Also available as radio frequency version DUO DMX APP COMFORTABLE. QUICK. INTUITIVE. Discover our latest free app for controlling all of our variants. GET IT ON The serves
More informationENGLISH APPMODULE UNPRECEDENTED OPPORTUNITIES.
ENGLISH UNPRECEDENTED OPPORTUNITIES. UNPRECEDENTED OPPORTUNITIES Also available as radio frequency version The APP MODULE provides a KNX interface and rests upon the tried and tested app concept: Load
More informationDUODMX GATEWAY LIGHT IT UP.
LIGHT IT UP. LIGHT IT UP. The has two independently-configurable DMX outputs, each with 512 channels. This allows two rooms to be controlled independently. The device can be operated as a DMX master or
More informationCUBEVISIONMODULE GREAT TECHNOLOGY IN A HANDY FORMAT.
CUBEVISIONMODULE GREAT TECHNOLOGY IN A HANDY FORMAT. CUBEVISIONMODULE GREAT TECHNOLOGY IN A HANDY FORMAT. The entry into the world of building automation has never been easier: The CUBEVISIONMODULE offers
More informationAUDIOMODULE MULTIROOM OUR WAY.
MULTIROOM OUR WAY. MULTIROOM OUR WAY The is a network streaming client which is optionally available with a line-out or speaker output. As a top hat rail device, it is installed in the distribution board.
More informationENGLISH APPMODULE. THE IoT+ GATEWAY.
ENGLISH APPMODULE THE IoT+ GATEWAY. APPMODULE THE IoT+ GATEWAY. Included KNX IP router functionality Also available as RF version Impossible? There s no such thing. With the APPMODULE you can easily connect
More informationENGLISH EIBPORT V3 VISUALISATION. AUTOMATION. INTEGRATION.
ENGLISH EIBPORT V3 VISUALISATION. AUTOMATION. INTEGRATION. EIBPORT VERSION 3 VISUALISATION. AUTOMATION. INTEGRATION. The EIBPORT connects KNX or EnOcean building control with the IP world. Create individual
More informationABB i-bus KNX IP Router, MDRC IPR/S 3.1.1, 2CDG110175R0011
Technical Data 2CDC502086D0201 Product description IP Router 3.1.1 is the interface between KNX installations and IP networks. It can be used as a line coupler or area coupler and can utilize the local
More informationAPPMODULE Documentation
BAB TECHNOLOGIE GmbH Documentation Version 1.2.1 Type: Extension, KNX/TP, EnOcean Item no.: 10490, 10495, 13501 Manual version IV As of 08/2016 Date: 29. August 2016 EN Documentation BAB TECHNOLOGIE GmbH
More informationLINKMODULE Documentation
BAB TECHNOLOGIE GmbH LINKMODULE Documentation Version 1.2.0. Type: KNX/TP, EnOcean Item no.: 10551, 13551 Manual version IV As of 01/2016 Date: 8. February 2016 EN LINKMODULE BAB TECHNOLOGIE GmbH Rosemeyerstr.
More informationDEUTSCH SMARTSURFACE BUILDING VISUALISATION OF THE LUXURY CLASS.
DEUTSCH SMARTSURFACE BUILDING VISUALISATION OF THE LUXURY CLASS. SMARTSURFACE BUILDING VISUALISATION OF THE LUXURY CLASS. No compromises. No detours. The brand new SMARTSURFACE with its brilliant Full-HD-Display
More informationABB i-bus KNX Logic Controller ABA/S 1.2.1, 2CDG110192R0011
Technical data 2CDC509078D0201 ABB i-bus KNX Product description The device provides extensive logic functions. The logic is defined via a graphic editor integrated in the ETS. Up to 3,000 logic gates
More informationABB i-bus KNX AC/S Application Controller
ABB i-bus KNX AC/S 1.2.1 Application Controller Description of product Automation controller with pre-defined automation modules for comprehensive heating, ventilation and air conditioning automation (HVAC
More informationeibport EnOcean Dokumentation
b.a.b-technologie gmbh eibport EnOcean Dokumentation Version 3.0 Typ LAN / EnOcean Artikel Nr.: 10104; 11104, 10504 Anleitungsversion VI Stand 02/2012 Datum: 2. Mai 2013 EN Inhaltsverzeichnis Dokumentation
More informationDUODMX GATEWAY Documentation
BAB TECHNOLOGIE GmbH Documentation Item no.: 12041, 12041w, 12011, 10211w, 12111, 12111w, 12021, 12121,12031 Manual version VII As of 02/2017 Date: 19 April 2017 15:27:05 EN Table of contents BAB TECHNOLOGIE
More informationAPPMODULE Documentation
BAB TECHNOLOGIE GmbH Documentation Version 1.3.4 Type: IP, KNX, EnOcean Item no.: 10491, 10495, 13501 Manual version IV As of 07/2017 Date: 25. July 2017 EN Documentation BAB TECHNOLOGIE GmbH INHOUSE Dortmund
More informationContents 1. Summary
Guangzhou Video-star Electronics Industrial Co., Ltd K-BUS R KNX IP Router User manual-ver.1 BNIPR-00/00.1 KNX/EIB Intelligent Installation Systems Contents 1. Summary------------------------------------------------------------------------------------------------------------------------------
More informationOperating and mounting instructions
General Usage IPAS DALI Gateways bring together the crossfunctional KNX installation bus and the lighting control specific DALI-Bus (IEC 60929). Lights with cost-effective, digital DALI ECGs can therefore
More informationABB GPG Building Automation, November 2016 ABB i-bus KNX Logic Controller ABA/S ABB Group November 10, 2016 Slide 1
ABB GPG Building Automation, November 2016 ABB i-bus KNX Logic Controller ABA/S 1.2.1 ABB Group November 10, 2016 Slide 1 Logic Controller ABA/S 1.2.1 Overview The new Logic Controller is an extremely
More informationABB i-bus KNX Analogue Actuator, 4-fold, MDRC, 0-10 V, 0-20 ma AA/S 4.1.2, 2CDG110202R0011
Technical Data 2CDC505168D0201 ABB i-bus KNX Product description The Analogue Actuator converts telegrams received via KNX into analog output signals. The device has four outputs. The analog outputs can
More informationApplication description for the KNXnet/IP Interface Web
Contents 1. General 1. General... 1 1.1 Basic information about the KNX/EIB BUS... 1 1.2 Application versions......1 1.3 Symbols...1 1.4 Function description... 2 1.5 Short description of the function
More informationProduct and Applications Description
IP N146/02 Product and Applications Description The IP N146/02 is a DIN rail mounted device. The device implements the KNXnet/IP standard and connects KNX/EIB lines via data networks using the Internet
More informationConnections, displays and operating elements C D
GB /IP- REG-K Operating instructions Art. no. MTN680329 For your safety ¼ DANGER Risk of fatal injury from electrical current. All work carried out on the device may only be performed by skilled electricians.
More informationPower Supply System KNX PS640-IP
Power Supply System KNX PS640-IP with Ethernet Interface Installation and Adjustment Elsner Elektronik GmbH Steuerungs- und Automatisierungstechnik Herdweg 7 D-75391 Gechingen Germany Phone: +49 (0) 70
More informationDOCUMENTATION UIMip TECHNICAL AND APPLICATION DESCRIPTION. Last modification: 8 September 2017
DOCUMENTATION UIMip TECHNICAL AND APPLICATION DESCRIPTION Author: Peter Hauner Last modification: 8 September 2017 2001-2017 Apricum d.o.o. Mažuranićeva 4, 21312 Podstrana, Hrvatska Details, modifications
More informationAPPMODULE FritzControl Complete App Documentation
REAL SMART HOME GmbH APPMODULE FritzControl Complete App Version: 1.2.1 Type: Application Article No.: BAB-002 Version I Actual state 03/2017 Date: 30. May 2017 EN FritzControl Complete App REAL SMART
More informationDOCUMENTATION UIMip. Authors: Manouchehr Ghahramanian Golzar, Peter Hauner. Last Modification:
DOCUMENTATION UIMip TECHNICAL AND APPLICATION DESCRIPTION Authors: Manouchehr Ghahramanian Golzar, Peter Hauner Last Modification: 2017-03-02 2001-2017 Apricum d.o.o. Mažuranićeva 4, 21312 Podstrana, Hrvatska
More informationDUO DMX Gateway documentation
b.a.b-technologie gmbh documentation Artikel Nr.: 12000, 12010, 12020, 12030 Documentation version IV Actual state 07/2012 Date: 8. August 2013 EN Table of Content b.a.b technologie gmbh im INHOUSE Dortmund
More informationProduct and Application Description
Technical Product-Information Product and Application Description The IP Gateway KNX-BACnet N 143 is is a DIN rail mounted device connecting a KNX installation with a system using BACnet/IP communication.
More informationKNX over IP. New Solutions for KNX Installations
WEINZIERL GINEERING GMBH F. Heiny, Dr. Th. Weinzierl Bahnhofstr. 6 DE-84558 Tyrlaching Tel. +49 (0) 8623 / 987 98-03 Fax +49 (0) 8623 / 987 98-09 E-Mail info@weinzierl.de KNX over IP New Solutions for
More informationKNX USB INTERFACE UIMtp
KNX USB INTERFACE UIMtp TECHNICAL AND APPLICATION DESCRIPTION Author: Peter Hauner Last modification: 13 November 2017 2001-2017 Apricum d.o.o. Mažuranićeva 4, 21312 Podstrana, Hrvatska Details, modifications
More informationCP BACNET Function
CP 343-1 BACNET Function The CP 343-1 BACnet independently handles data traffic via Industrial Ethernet and BACnet protocol. The module has its own processor and can be put into service directly using
More informationJUMO mtron T Measuring, Control, and Automation System
sales@jumo.co.uk info.us@jumo.net Data Sheet 705040 Page 1/8 JUMO mtron T Measuring, Control, and Automation System Router module Brief description The router module is used to achieve decentralization
More informationDUODMX GATEWAY documentation
b.a.b-technologie gmbh DUODMX GATEWAY documentation Artikel Nr.: 12000, 12010, 12020, 12030, 12100, 12110, 12120 Documentation version IV Actual state 07/2012 Date: 15. September 2014 EN Table of Content
More informationPush Button Interface UP 220D31
Product and Applications Description Application programs UP 220/31 07 B0 S4 On-off-toggle/Dim/Shu/Value 982203 The push button interface is a binary input and output devices for installation in in-wall
More informationb.a.b-technologie gmbh Manager Dokumentation
b.a.b-technologie gmbh Manager Dokumentation I Stand 10/2007 Datum: 11. Juni 2012 DE Inhaltsverzeichnis Dokumentation Manager b.a.b technologie gmbh im INHOUSE Dortmund Rosemeyerstr. 14 44139 Dortmund
More informationInstallation Manual TH LINK PROFINET. Version: EN Copyright 2014 Softing Industrial Automation GmbH
Installation Manual TH LINK PROFINET Version: EN-201410-1.00 Copyright 2014 Softing Industrial Automation GmbH Disclaimer of liability The information contained in these instructions corresponds to the
More informationProduct and Applications Description. Application programs. instabus EIB Technical Product Information. February 2012
Product and Applications Description Application programs UP 220/31 07 B0 S4 On-off-toggle/Dim/Shu/Value 982201 The push button interface UP 220/31 is a binary input and output devices for installation
More informationABB i-bus KNX Switch Actuator, x-fold, 6 A, MDRC SA/S x.6.1.1, 2CDG x R0011
, 2CDG 110 15x R0011 SA/S 12.6.1.1 2CDC 071 033 S0012 The 6 A Switch actuators are modular installation devices in Pro M Design for installation in the distribution board. The devices are suitable for
More informationMED MI 1005 Network Isolators
MED MI 1005 Network Isolators General Network isolators protect patients and medical devices from excessive leakage currents that may flow through the data network. Every device connected to the network
More informationWAGO Energy Data Management Efficiency Is That Easy!
WAGO Energy Data Management Efficiency Is That Easy! MEASUREMENT SYSTEM WITH ADDED VALUE This user-friendly solution, consisting of software combined with a modular control system, records measurement
More informationDatalogger documentation
b.a.b-technologie gmbh Datalogger documentation Version 1.0 Documentation version I Actual state 06/2013 Date: 16. December 2013 EN documentation DataLogger b.a.b technologie gmbh im INHOUSE Dortmund Rosemeyerstr.
More informationQuick Start Guide WALL IE. Version. 7 en. as of FW
Quick Start Guide WALL IE Version en as of FW. www.helmholz.de Contents. Introduction. Connection. Initial access to the web interface. Adapting IP addresses. The bridge mode. Packet filter functionality.
More informationProduct and functional description
Product and functional description The RS 520/23 shutter / blind actuator is a KNX device with one relay output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The
More informationABB i-bus KNX Weather Unit, 1-fold, MDRC WZ/S , 2CDG110184R0011
Technical Data 2CDC504091D0201 ABB i-bus KNX Product description The Weather Unit WZ/S 1.3.1.2 is used - primarily in residential applications - to record weather data. The Weather Sensor WES/A 3.1 is
More informationTechnical Manual MDT IP Router
1/2012 Technical Manual MDT IP Router SCN-IP100.01 Table of contents 1 Introduction...3 1.1 Installation and connection...3 2.1 Coupler function...4 2.2 Bus access function (KNXnet/IP Tunneling)...6 3
More informationProduct and functional description
Product and functional description The UP 525/13 Universal Dimmer is a KNX device with one dimmer output. The device is installed in a flushmount wall box (60 mm Ø, depth 60 mm) or an installation box.
More informationABB i-bus KNX Switch Actuator, x-fold, 10 A, MDRC SA/S x , 2CDG11015xR0011
Technical Data 2CDC505054D0205 ABB i-bus KNX Product description Switch Actuators SA/S x.6.2.1, 10 A are modular installation devices in ProM design for installation in the distribution board. They are
More informationIP Desktop Intercom Stations 12 NIB 001 Series
IP Desktop Intercom Stations 12 NIB 001 Series Features and Functions IP desktop intercom stations for indoor use 12 keys with protective labels for individual key labeling and multi-color status indication
More informationFan Coil Actuator, MDRC FCA/S 1.1M, 2CDG R0011
, 2CDG 110 084 R0011 2CDC 071 112 F0008 The Fan Coil Actuator is a modular installation device (MDRC) in prom design. It is intended for installation in the distribution board on 35 mm mounting rails.
More informationProduct and functional description
Product and functional description Connection example The universal dimmer main module N 528/31 is an installation device for DIN-rail mounting, with N-system dimensions. It is designed for lighting control,
More informationABB i-bus KNX BCI/S Boiler/Chiller Interface
ABB i-bus KNX BCI/S 1.1.1 Boiler/Chiller Interface Description of product The boiler/chiller interface is a modular DIN rail component that acts as an interface to the heating/cooling system generator.
More informationIP/ KNX Convertor K-BUS R. User manual-ver.1 BTIC-01/00.1. KNX/EIB Intelligent Installation Systems
Guangzhou Video-star Electronics Industrial Co., Ltd K-BUS R IP/ KNX Convertor User manual-ver.1 BTIC-01/00.1 KNX/EIB Intelligent Installation Systems Contents 1. Summary ---------------------------------------------------------------------------------------------------------
More informationABB i-bus KNX Analogue Input, 4-fold, MDRC AE/S , 2CDG110190R0011
Technical Data 2CDC504084D0201 ABB i-bus KNX Product description The device is used to record analogue data. Four conventional sensors can be connected to the device. The connection to the bus is established
More informationUSB RF INTERFACE UIMrf
USB RF INTERFACE UIMrf TECHNICAL AND APPLICATION DESCRIPTION Author: Peter Hauner Last modification: 13 November 2017 2001-2017 TAPKO Technologies GmbH Im Gewerbepark A15, 93059 Regensburg, Germany Details,
More informationKNX T-UP. Temperature Sensor. Technical specifications and installation instructions
EN KNX T-UP Temperature Sensor Technical specifications and installation instructions Elsner Elektronik GmbH Control and Automation Engineering Herdweg 7 D 75391 Gechingen Phone +49 (0) 70 56 / 93 97-0
More informationTechnical Manual MDT IP Router
3/2015 Technical Manual MDT IP Router SCN-IP100.01 Table of contents 1 Introduction... 3 1.1 Installation and connection... 3 2.1 Coupler function... 4 2.2 Bus access function (KNXnet/IP Tunneling)...
More informationKNX DEVICES PRICE LIST
KNX DEVICES PRICE LIST 1. KNX USB Interfaces, KNX Power Supplies and KNX Coupler 101 KNX USB Interface 312 (Art. No. 5229) Interface between USB and KNX TP Successor to the KNX USB Interface 311 Support
More informationABB i-bus KNX DALI Light Controller, 8-fold, MDRC DLR/S M, 2CDG110101R0011
Technical data 2CDC507101D0202 ABB i-bus KNX Product description The ABB i-bus KNX DALI Light Controller DLR/S 8.16.1M is a KNX modular installation device (MDRC) in ProM design for installation in the
More informationABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x , 2TAZ710xx1R2161
Technical Data 9AKK107045A4913 ABB i-bus KNX Product description Switch Actuators SA/S x.16.2.1, 16 A are modular installation devices in ProM design for installation in the distribution board. They are
More informationInstallation and Operating Instructions. webremote
Installation and Operating Instructions webremote 02/2012 PSG Plastic Service GmbH 1 Installations- und Bedienungsanleitung webremote Table of Contents 1 Typographical Conventions 2 webremote 2.1 Overview
More informationCube LAN Gateway. Operating manual BC-LGW-O-TW
Cube LAN Gateway Operating manual BC-LGW-O-TW Package contents Package contents Quantity Item 1x MAX! Cube LAN Gateway 1x 1x 1x 1x 1x 3x Plug-in USB power supply USB cable Network cable Mounting accessories
More informationABB i-bus KNX HCC/S Heating/cooling circuit controller
ABB i-bus KNX HCC/S 2.2.1.1 Heating/cooling circuit controller Description of product The device is a modular DIN rail component (MDRC) in pro M design. It is intended for installation in distribution
More informationWTX120. Legal-for-trade industrial weighing terminal. Special features. Data sheet
WTX120 Legal-for-trade industrial weighing terminal Special features - Connection of up to 8 SG load cells (350 ohm) via plug terminals - Display resolution up to 30,000, legal for trade up to 10,000e
More informationCOMTRAXX COM465IP. Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks
Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks COM465IP_D00217_04_D_XXEN/11.2018 Condition Monitor with integrated gateway for the connection
More informationAir Quality Sensor KNX AQS
EN Air Quality Sensor KNX AQS Technical Specifications and Installation Instructions Elsner Elektronik GmbH Control and Automation Engineering Herdweg 7 D 75391 Gechingen Phone +49 (0) 70 56 / 93 97-0
More informationCOMTRAXX COM465IP. Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks
Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks COM465IP_D00217_00_D_XXDE/10.2015 Condition Monitor with integrated gateway for the connection
More informationLogicMachine5 Power (LM5p-DW1)
Embedded Systems SIA, VAT No LV40003411103 47. Katolu str., Riga, LV 1003, LATVIA Phone: +371 67648888, fax: +371 67205036, e-mail: sales@openrb.com LogicMachine5 Power (LM5p-DW1) LogicMachine (LM) is
More informationCOMTRAXX COM465DP. Condition Monitor with integrated gateway for the connection of Bender devices to PROFIBUS DP and Ethernet TCP/IP networks
Condition Monitor with integrated gateway for the connection of Bender devices to PROFIBUS DP and Ethernet TCP/IP networks COM465DP_D00216_00_D_XXDE/10.2015 Condition Monitor with integrated gateway for
More informationNews on Gira's door communication system Gira DCS mobile mobile door communication system Gira DCS IP data interface Gira Project Assistant (GPA)
Product information As of 11/2018 News on Gira's door communication system Gira DCS mobile mobile door communication system Gira DCS IP data interface Gira Project Assistant (GPA) Gira DCS mobile mobile
More informationWeather station GPS AP 257/61 Weather station AP 257/51
Gamma instabus Weather station GPS AP 257/61 Weather station AP 257/51 Technical product information 5WG1 257-3AB61 5WG1 257-3AB51 Weather station with sensors to survey temperature, brightness, rain and
More informationAPPMODULE Homematic Control App Documentation
REAL SMART HOME GmbH APPMODULE Homematic Control App Version: 1.0.0 Type: Application Article No.: version I Actual state 03/2017 Date: 1. Juni 2017 EN Homematic Control App REAL SMART HOME GmbH STILWERK
More informationProduct and Application Description
Technical Product - Information Product and Application Description The room temperature controller UP 237K and UP 252K are available in the following colors, matching the design of the wall switch design
More informationPRELIMINARY. USB1 / USB2 USB host interface to read data via memory stick. Bus Out (system bus) For connection to a router
sales@jumo.co.uk info@jumo.us Data sheet 705060 Page 1/12 JUMO mtron T Measuring, Control, and Automation System Multifunction panel 840 Brief description The multifunction panel 840 has a touchscreen
More information8-Outlet eco PDU PE6208AV
8-Outlet eco PDU Ideal for CI and Pro-AV applications, the ATEN NRGence eco PDU is an intelligent 1U rack PDU that contains 8 AC outlets available in an IEC socket configuration. The unique design with
More information---- IntesisBox KNX Modbus RTU Master and Modbus TCP Client
---- IntesisBox KNX Modbus RTU Master and Modbus TCP Client User Manual r1.1 eng Issue date: 05/2018 Intesis Software S.L.U. 2018 All Rights Reserved. Information in this document is subject to change
More informationOCI Service Tool. Siemens Building Technologies HVAC Products. ACS plant operating software and OCI700 service interface
5 655 Service Tool ACS plant operating software and OCI700 service interface OCI7001 Service tool for commissioning and the diagnosis of HVAC controllers of the Synco, SIGMAGYR and ALBATROS ranges Use
More information1-Port Serial-to-IP Ethernet Device Server - RS232 - DIN Rail and Surface Mountable - Aluminum
1-Port Serial-to-IP Ethernet Device Server - RS232 - DIN Rail and Surface Mountable - Aluminum Product ID: NETRS2321P This 1-port serial device server is an effective serial-over-ip solution that lets
More informationQUICKSTART Smart EnOcean Gateway DC-GW/EO-IP
QUICKSTART Smart EnOcean Gateway DC-GW/EO-IP Digital Concepts GmbH 27.07.2016 Contents 1. Introduction... 3 2. Functionality... 4 3. Package Contents... 4 4. Requirements... 5 5. Ports... 5 6. Mounting...
More informationDate Revision Change(s) 29/07/ First version
Revision overview Revision overview Date Revision Change(s) 29/07/2016 0 First version Copyright 2016 Indu-Sol GmbH We reserve the right to amend this document without notice. We continuously work on further
More informationIPM-01 / IPM-01H MODBUS TCP/RTU Bridge User Guide
VxI Power Ltd. IPM-01 / IPM-01H MODBUS TCP/RTU Bridge User Guide 01/12/2015 Document Number: 14970-020A Issue Number: 2 Contents 1.0 Device Overview... 2 2.0 Getting Started... 3 2.1 Connecting the Device...
More informationIP gateway, MDRC IG/S 1.1, GH Q R0001
, GH Q631 0067 R0001 The IP gateway IG/S is the interface The IP address of the IG/S can be between EIB / KNX installations and IP fixed or received from a DHCP server. CDC 071 130 F0003 networks. Data
More informationWeather station AP 257/51
Gamma instabus Weather station GPS AP 257/61 Weather station AP 257/51 Technical product information 5WG1 257-3AB61 5WG1 257-3AB51 Weather station with sensors to survey temperature, brightness, rain and
More informationThe world of BAOS. Easy connectivity for KNX with Bus Access and Object Server. Overview and applications
The world of BAOS Easy connectivity for KNX with Bus Access and Object Server Overview and applications WEINZIERL ENGINEERING GmbH Achatz 3 DE-84508 Burgkirchen / Alz Germany Phone : +49 (0)8677 / 91 636
More informationMid-span 802.3af PoE Injector. Installation Guide KPOE-100
Mid-span 802.3af PoE Injector Installation Guide KPOE-100 Doc. 070521 1 (C) 2005 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used
More informationThe Next Level of Energy Data Management Fast Data Acquisition via Parameterization No Programming
The Next Level of Energy Data Management Fast Data Acquisition via Parameterization No Programming ENERGY DATA MANAGEMENT Record, Visualize and Analyze Energy Data Individual, Simple and Expandable Our
More informationTechnical data. General specifications. Functional safety related parameters B 10d Electrical specifications Operating voltage U B
Model Number Cable pull rotary encoder with PROFI- NET interface Features Robust aluminum drum housing Drum travel when cable retracted using threaded spindle Bellows with steel tip Comprehensive accessories
More informationcamera sensor ipf opti-check 1070 fully integrated camera system contour-based recognition
ipf opti-check 1070 53 x 99.5 x 38mm camera sensor operating distance variable C-mount for lenses integrated flash controller short set-up times because of up to 255 check programs with up to 32 feature
More informationProduct and functional description
Product and functional description The RS 525/23 Universal Dimmer is a KNX device with one dimmer output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The bus
More informationCU-DIN USB KNX EC
CU-DIN USB KNX EC10430541 MA00653301 Table of contents 1 Description...2 2 Safety instructions...3 3 Dimension drawings...4 4 Technical data...5 5 Product disposal...6 6 ESYLUX manufacturer s guarantee...6
More informationMPI-DN, MPI-D MULTICHANNEL ELECTRONIC RECORDER for HART or RS-485/ MODBUS RTU SENSORS
MPI-DN, MPI-D MULTICHANNEL ELECTRONIC RECORDER for HART or RS-485/ MODBUS RTU SENSORS 18 channels for HART / Modbus RTU sensors 2 digital channels 16 math channels 4 relay outputs for alarm or control
More informationBMF400 Input/output module
BMF400 Input/output module Input/output module with six universal inputs/outputs and four floating relay outputs for function extensions of the BMR bus module controller. Issue date: December 6, 2006 Subject
More informationGeneral information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes
Datasheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO 24V DC 0.5A 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY:
More informationControllers CECC Key features
Key features Application Controller State-of-the-art programming The controllers CECC are modern, compact and versatile controllers that enable programming with CODESYS according to IEC 61131-3. CODESYS
More informationTechnology modules. 1 SSI interface for absolute encoders, 1 analog output S20-SSI-AO-1/1
1 SSI interface for absolute encoders, 1 analog output S20- 2 Bosch Rexroth AG Electric Drives and Controls Position detection via absolute encoders with SSI interface Encoder resolution up to 56 bit Transmission
More informationMeasuring modules CPX-CMIX
Key features At a glance Movement and measurement in one, as an integral component of the valve terminal CPX the modular peripheral system for decentralised automation tasks. The modular design means that
More informationLuminaire testing device
Luminaire testing device Thermal testing to EN60598 Tried and tested. Compact. Automated. Thermal testing to EN 60598 Compact and easy to use hardware EN 60598 is the certification and approval standard
More informationWater-protected surface-mounted push-button bus coupler Order No , , ,
KNX Product documentation Issue: 14.10.2014 629x2y2z Water-protected surface-mounted push-button bus coupler Contents KNX Product documentation 1 Product definition... 3 1.1 Product catalogue... 3 1.2...
More information