FRAUNHOFER INSTITUTE FOR ALGORITHMS AND SCIENTIFIC COMPUTING SCAI
|
|
|
- Cornelia Jefferson
- 5 years ago
- Views:
Transcription
1 FRAUNHOFER INSTITUTE FOR ALGORITHMS AND SCIENTIFIC COMPUTING SCAI MpCCI Release Notes
2 MpCCI GUI Improve the start and error management of simulation codes in MpCCI GUI. Enhanced rules lists function by offering options for generating only one region as a results of combining some rules. This can be used to extend or reduce the components building a region. Quantity sets are now automatically named using the selected quantities. New user property for automatically saving project data before starting the coupled simulation. Unit system SI-mm-t-s has been renamed to mm-t-s Removed Jacobi and Broyden methods fro Quasi-Newton relaxation method Final output windows for each code are available on demand.
3 MpCCI Batch system management Additional handling options for setting up the simulation environment for a batch calculation on a cluster. New arguments for the mpcci batch command: Option to change the number of cpus per code (-np) Option to use the local MpCCI installation Path on remote node (-useabsolutepath) Dynamic environment setup for a code via a environment file: Environment file (.env) to define code specific environment variables like PATH, License, etc Supports symbols to set or concatenate a variable
4 MpCCI Visualizer / Monitor Data range can be better adjusted on the current value set or overall value range. Option for automatic grouping parts by mesh id. Pause button do not jump to the last in Monitor mode. Iteration norms are plotted in logarithmic scale. Support pattern in the selection field in Settings Panel.
5 MpCCI CAE Tools latest release Abaqus 2018: enable DMP parallelisation for Abaqus Standard New MpCCI abaqus subcommand to help user to construct a restart input deck by displaying the available restart points. ANSYS 18.2, 19.0 FINE/Open 6.2 FINE/Turbo 11.2, 12.1, 12.2 FLUENT 18.2, 19.0 Additional checks before using the scheme function mpcci-solve to ensure that the case file is initialized. Only double precision is supported.
6 MpCCI CAE Tools latest release JMAG 17.0 MSC Adams 2018 MSC Marc MSC Nastran , Fixes for iterative coupling: Correct read out of the total time for a NLSTEP. Keep the force load after the coupling converged until the end of the time step. Option to select the MPI vendor to use.
7 MpCCI CAE Tools latest release OpenFOAM v1712: Fix for iterative coupling Support OpenFOAM velocity motion solver Improve restart simulation with mesh morphing using the MpCCI Grid morpher. Taitherm , , , Fix the MPI bootstrap option for using rsh. Unchanged model with curve setting for the time step size. Fix steady state simulation setup with a tolerance slope value and a coupling iteration start value. Transient simulation setup with a coupling start time ts now includes the calculated solution for the time period ts in the exchanged data.
8 MpCCI CAE Tools latest release Taitherm Enhanced MpCCI command importcfd Support relative path to the csp file. Do not handle parts with assigned temperature setting. Enhanced MpCCI command clean Reset convection property to none for the parts with assigned temperature. Fix removing functions hooks from the tdf file. STAR-CCM , 12.06
9 MpCCI Coupling Server Pre-check mode: Allow to compute the neighborhood search and exits the calculation. Require additional license tokens. Additional server log file with information about the job setup Neighborhood calculation Elapsed wall clock time per coupling step Iterative Coupling Relaxation convergence can be used to as criterium. Improvement of the AndersonMixing Quasi-Newton method Possible to relax the first iteration by omega value.
Automotive Thermal Management for Full Vehicles
Automotive Thermal Management for Full Vehicles Concerning the thermal behavior of automotive vehicles it is pursued to accomplish simulations for the full complexity of a vehicle's geometry and transport
Open source software tools for powertrain optimisation
Open source software tools for powertrain optimisation Paolo Geremia Eugene de Villiers TWO-DAY MEETING ON INTERNAL COMBUSTION ENGINE SIMULATIONS USING OPENFOAM TECHNOLOGY 11-12 July, 2011 info@engys.eu
Appendix P. Multi-Physics Simulation Technology in NX. Christian Ruel (Maya Htt, Canada)
251 Appendix P Multi-Physics Simulation Technology in NX Christian Ruel (Maya Htt, Canada) 252 Multi-Physics Simulation Technology in NX Abstract As engineers increasingly rely on simulation models within
Introduction to Actran for Acoustics Radiation Analysis
Introduction to Actran for Acoustics Radiation Analysis November 21 st, 2012 Chanhee Jeong Agenda Introduction to Actran Acoustic Radiation Analysis with Actran Weakly Coupled Vibro-Acoustics Computational
MpCCI X FSIMapper
MpCCI 4.4.2 MpCCI X FSIMapper MpCCI 4.4.2-1 Documentation Part X FSIMapper PDF version October 16, 2015 MpCCI is a registered trademark of Fraunhofer SCAI www.mpcci.de Fraunhofer Institute for Algorithms
Part I. MpCCI FSIMapper. Version 4.5.0
Part I MpCCI FSIMapper Version 4.5.0 MpCCI 4.5.0-1 Documentation Part I FSIMapper PDF version March 30, 2017 MpCCI is a registered trademark of Fraunhofer SCAI www.mpcci.de Fraunhofer Institute for Algorithms
Compressible Flow in a Nozzle
SPC 407 Supersonic & Hypersonic Fluid Dynamics Ansys Fluent Tutorial 1 Compressible Flow in a Nozzle Ahmed M Nagib Elmekawy, PhD, P.E. Problem Specification Consider air flowing at high-speed through a
Application Codes. Introduction to HP XC4000 Cluster Paul Weber Rechenzentrum, Universität Karlsruhe (TH) karlsruhe.
Application Codes Introduction to HP XC4000 Cluster Paul Weber Rechenzentrum, Universität Karlsruhe (TH) paul.weber@rz.uni karlsruhe.de Application Codes from ISVs Primary CAE applications (in Karlsruhe)
Tutorial: Modeling Domains with Embedded Reference Frames: Part 2 Sliding Mesh Modeling
Tutorial: Modeling Domains with Embedded Reference Frames: Part 2 Sliding Mesh Modeling Introduction The motion of rotating components is often complicated by the fact that the rotational axis about which
High Performance Computing: Tools and Applications
High Performance Computing: Tools and Applications Edmond Chow School of Computational Science and Engineering Georgia Institute of Technology Lecture 15 Numerically solve a 2D boundary value problem Example:
Lab 9: FLUENT: Transient Natural Convection Between Concentric Cylinders
Lab 9: FLUENT: Transient Natural Convection Between Concentric Cylinders Objective: The objective of this laboratory is to introduce how to use FLUENT to solve both transient and natural convection problems.
Flow and Heat Transfer in a Mixing Elbow
Flow and Heat Transfer in a Mixing Elbow Objectives The main objectives of the project are to learn (i) how to set up and perform flow simulations with heat transfer and mixing, (ii) post-processing and
Fluid-Structure Interaction in STAR-CCM+ Alan Mueller CD-adapco
Fluid-Structure Interaction in STAR-CCM+ Alan Mueller CD-adapco What is FSI? Air Interaction with a Flexible Structure What is FSI? Water/Air Interaction with a Structure Courtesy CFD Marine Courtesy Germanischer
OpenFOAM and Third Party Structural Solver for Fluid Structure Interaction Simulations
OpenFOAM and Third Party Structural Solver for Fluid Structure Interaction Simulations Robert L. Campbell rlc138@arl.psu.edu Fluids and Structural Mechanics Office Applied Research Laboratory The Pennsylvania
Simcenter 3D Engineering Desktop
Simcenter 3D Engineering Desktop Integrating geometry and FE modeling to streamline the product development process Benefits Speed simulation processes by up to 70 percent Increase product quality by rapidly
This tutorial illustrates how to set up and solve a problem involving solidification. This tutorial will demonstrate how to do the following:
Tutorial 22. Modeling Solidification Introduction This tutorial illustrates how to set up and solve a problem involving solidification. This tutorial will demonstrate how to do the following: Define a
Simcenter 3D Engineering Desktop
Simcenter 3D Engineering Desktop Integrating geometry and FE modeling to streamline the product development process Benefits Speed simulation processes by up to 70 percent Increase product quality by rapidly
Dell EMC Ready Bundle for HPC Digital Manufacturing Dassault Systѐmes Simulia Abaqus Performance
Dell EMC Ready Bundle for HPC Digital Manufacturing Dassault Systѐmes Simulia Abaqus Performance This Dell EMC technical white paper discusses performance benchmarking results and analysis for Simulia
Design and Optimization of Plants and Components for the Production of Polyurethane Foams using STAR-CCM+
Design and Optimization of Plants and Components for the Production of Polyurethane Foams using STAR-CCM+ Dr. Carsten Brodbeck, Bettina Landvogt Martin Schamberg Fraunhofer SCAI Hennecke Polyurethane Technology
Lecture 5 Two-way FSI Solving and Post Processing. Solving FSI Applications Using ANSYS Mechanical and ANSYS CFX Release. Release 14.
Lecture 5 Two-way FSI Solving and Post Processing 14. 5 Release Solving FSI Applications Using ANSYS Mechanical and ANSYS CFX 1 2011 ANSYS, Inc. July 26, 2013 Outline Solution Process Here we discuss starting
Coupled Analysis of FSI
Coupled Analysis of FSI Qin Yin Fan Oct. 11, 2008 Important Key Words Fluid Structure Interface = FSI Computational Fluid Dynamics = CFD Pressure Displacement Analysis = PDA Thermal Stress Analysis = TSA
Using Multiple Rotating Reference Frames
Tutorial 9. Using Multiple Rotating Reference Frames Introduction Many engineering problems involve rotating flow domains. One example is the centrifugal blower unit that is typically used in automotive
Shape optimisation using breakthrough technologies
Shape optimisation using breakthrough technologies Compiled by Mike Slack Ansys Technical Services 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Introduction Shape optimisation technologies
Isotropic Porous Media Tutorial
STAR-CCM+ User Guide 3927 Isotropic Porous Media Tutorial This tutorial models flow through the catalyst geometry described in the introductory section. In the porous region, the theoretical pressure drop
ANSYS FLUENT. Lecture 3. Basic Overview of Using the FLUENT User Interface L3-1. Customer Training Material
Lecture 3 Basic Overview of Using the FLUENT User Interface Introduction to ANSYS FLUENT L3-1 Parallel Processing FLUENT can readily be run across many processors in parallel. This will greatly speed up
Vehicle thermal safety with THESEUS-FE. Author: Dr. Daniel Koester
Author: Dr. Daniel Koester Date: September 4, 2014 Workflow for Underhood Simulations ANSA or other CAD/meshing software CAD cleanup and meshing: either CAD geometry description or NASTRAN-style FE meshes
Running a Thermal Analysis
Chapter 4: Running a Thermal Analysis 4 Running a Thermal Analysis Introduction 106 Review of the Analysis Form 107 Translation Parameters 111 Solution Types 115 Direct Text Input 121 Subcases 123 Subcase
A FRAMEWORK FOR SIMULATION PROCESS MANAGEMENT AND DATA MINING
A FRAMEWORK FOR SIMULATION PROCESS MANAGEMENT AND DATA MINING Dipl.-Ing C. Schöne (GNS-mbh, Germany), MSc. R. Iza-Teran, Prof. Dr. J. Garcke (Fraunhofer Institute SCAI, Germany). Prof. Dr. J. Garcke, Head
EnSight October 2013 Japan EnSight User Meeting Tokyo, Japan. Darin McKinnis VP Sales and Marketing
EnSight 10.1 October 2013 Japan EnSight User Meeting Tokyo, Japan Darin McKinnis VP Sales and Marketing darin@ceisoftware.com Business Reports 2012 was our best year in company history > 95% renewal rate
Using Multiple Rotating Reference Frames
Tutorial 10. Using Multiple Rotating Reference Frames Introduction Many engineering problems involve rotating flow domains. One example is the centrifugal blower unit that is typically used in automotive
Recent Advances in Modelling Wind Parks in STAR CCM+ Steve Evans
Recent Advances in Modelling Wind Parks in STAR CCM+ Steve Evans Introduction Company STAR-CCM+ Agenda Wind engineering at CD-adapco STAR-CCM+ & EnviroWizard Developments for Offshore Simulation CD-adapco:
Mesh Morphing and the Adjoint Solver in ANSYS R14.0. Simon Pereira Laz Foley
Mesh Morphing and the Adjoint Solver in ANSYS R14.0 Simon Pereira Laz Foley 1 Agenda Fluent Morphing-Optimization Feature RBF Morph with ANSYS DesignXplorer Adjoint Solver What does an adjoint solver do,
Steady Flow: Lid-Driven Cavity Flow
STAR-CCM+ User Guide Steady Flow: Lid-Driven Cavity Flow 2 Steady Flow: Lid-Driven Cavity Flow This tutorial demonstrates the performance of STAR-CCM+ in solving a traditional square lid-driven cavity
Topology-Optimization for internal Fluid Flow: TOSCA Fluid FE-DESIGN the optimization company
Topology-Optimization for internal Fluid Flow: TOSCA Fluid CFD topology optimization for channel flow Task: Find a geometrical proposal for a channel within a fluid design space: For each fluid cell decide:?
The Visual Computing Company
The Visual Computing Company GPU Acceleration Benefits for Applied CAE Axel Koehler, Senior Solutions Architect HPC, NVIDIA HPC Advisory Council Meeting, April 2014, Lugano Outline General overview about
Missile External Aerodynamics Using Star-CCM+ Star European Conference 03/22-23/2011
Missile External Aerodynamics Using Star-CCM+ Star European Conference 03/22-23/2011 StarCCM_StarEurope_2011 4/6/11 1 Overview 2 Role of CFD in Aerodynamic Analyses Classical aerodynamics / Semi-Empirical
Performance of Implicit Solver Strategies on GPUs
9. LS-DYNA Forum, Bamberg 2010 IT / Performance Performance of Implicit Solver Strategies on GPUs Prof. Dr. Uli Göhner DYNAmore GmbH Stuttgart, Germany Abstract: The increasing power of GPUs can be used
GPU-Acceleration of CAE Simulations. Bhushan Desam NVIDIA Corporation
GPU-Acceleration of CAE Simulations Bhushan Desam NVIDIA Corporation bdesam@nvidia.com 1 AGENDA GPUs in Enterprise Computing Business Challenges in Product Development NVIDIA GPUs for CAE Applications
Swapnil Nimse Project 1 Challenge #2
Swapnil Nimse Project 1 Challenge #2 Project Overview: Using Ansys-Fluent, analyze dependency of the steady-state temperature at different parts of the system on the flow velocity at the inlet and buoyancy-driven
The purpose of this tutorial is to illustrate how to set up and solve a problem using the. Moving Deforming Mesh (MDM) using the layering algorithm.
Tutorial: Introduction The purpose of this tutorial is to illustrate how to set up and solve a problem using the following two features in FLUENT. Moving Deforming Mesh (MDM) using the layering algorithm.
Ansys Fluent R Michele Andreoli
Ansys Fluent R 17.0 Michele Andreoli (m.andreoli@enginsoft.it) Table of contents User Interface Fluent Meshing Solver Numerics New features Innovative Solutions New User Interface: Ribbon-Driven Solver
A Comparison of Commercial CFD Software Capable of Coupling to External Electromagnetic Software for Modeling of Microwave Heating Process
A Comparison of Commercial CFD Software Capable of Coupling to External Electromagnetic Software for Modeling of Microwave Heating Process Pawel Kopyt and Wojciech Gwarek Institute of Radioelectronics,
Problem description. The FCBI-C element is used in the fluid part of the model.
Problem description This tutorial illustrates the use of ADINA for analyzing the fluid-structure interaction (FSI) behavior of a flexible splitter behind a 2D cylinder and the surrounding fluid in a channel.
Tutorial 1. Introduction to Using FLUENT: Fluid Flow and Heat Transfer in a Mixing Elbow
Tutorial 1. Introduction to Using FLUENT: Fluid Flow and Heat Transfer in a Mixing Elbow Introduction This tutorial illustrates the setup and solution of the two-dimensional turbulent fluid flow and heat
Flow Sim. Chapter 16. Airplane. A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file.
Chapter 16 Airplane Flow Sim A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file. Step 2. If necessary, turn on Flow Simulation, click the flyout of Options on the Standard toolbar
Melting Using Element Death
Melting Using Element Death Introduction This tutorial was completed using ANSYS 7.0 The purpose of the tutorial is to outline the steps required to use element death to model melting of a material. Element
Fluent User Services Center
Solver Settings 5-1 Using the Solver Setting Solver Parameters Convergence Definition Monitoring Stability Accelerating Convergence Accuracy Grid Independence Adaption Appendix: Background Finite Volume
Faster Innovation - Accelerating SIMULIA Abaqus Simulations with NVIDIA GPUs. Baskar Rajagopalan Accelerated Computing, NVIDIA
Faster Innovation - Accelerating SIMULIA Abaqus Simulations with NVIDIA GPUs Baskar Rajagopalan Accelerated Computing, NVIDIA 1 Engineering & IT Challenges/Trends NVIDIA GPU Solutions AGENDA Abaqus GPU
NX Advanced Simulation
Siemens PLM Software Integrating FE modeling and simulation streamlines product development process Benefits Speed simulation processes by up to 70 percent Perform accurate, reliable structural analysis
c Fluent Inc. May 16,
Tutorial 1. Office Ventilation Introduction: This tutorial demonstrates how to model an office shared by two people working at computers, using Airpak. In this tutorial, you will learn how to: Open a new
Tutorial 2. Modeling Periodic Flow and Heat Transfer
Tutorial 2. Modeling Periodic Flow and Heat Transfer Introduction: Many industrial applications, such as steam generation in a boiler or air cooling in the coil of an air conditioner, can be modeled as
NX for Simulation: Product capabilities in NX 8
for : Product capabilities in NX 8 NX 8.0 for capability chart Add-on products to or Advanced Included in module NX Updating NX Design NX Motion Preprocessing Geometry import Neutral geometry transfer
Multiphysics for Thermal Analysis: A Holistic Approach to Process Optimization
> Multiphysics for Thermal Analysis: A Holistic Approach to Process Optimization Thomas Kessling, Stefan Hildenbrand, Victor Fässler 5th - 6th July 2007 Renault Technocentre at Guyancourt, France TWT GmbH
HPC Computer Aided CINECA
HPC Computer Aided Engineering @ CINECA Raffaele Ponzini Ph.D. CINECA SuperComputing Applications and Innovation Department SCAI 16-18 June 2014 Segrate (MI), Italy Outline Open-source CAD and Meshing
Fast Setup and Integration of Abaqus on HPC Linux Cluster and the Study of Its Scalability
Fast Setup and Integration of Abaqus on HPC Linux Cluster and the Study of Its Scalability Betty Huang, Jeff Williams, Richard Xu Baker Hughes Incorporated Abstract: High-performance computing (HPC), the
Webinar optislang & ANSYS Workbench. Dynardo GmbH
Webinar optislang & ANSYS Workbench Dynardo GmbH 1 1. Introduction 2. Process Integration and variation studies 6. Signal Processing 5. ANSYS Mechanical APDL in optislang 3. optislang inside ANSYS 4. ANSYS
Calculate a solution using the pressure-based coupled solver.
Tutorial 19. Modeling Cavitation Introduction This tutorial examines the pressure-driven cavitating flow of water through a sharpedged orifice. This is a typical configuration in fuel injectors, and brings
Auto Injector Syringe. A Fluent Dynamic Mesh 1DOF Tutorial
Auto Injector Syringe A Fluent Dynamic Mesh 1DOF Tutorial 1 2015 ANSYS, Inc. June 26, 2015 Prerequisites This tutorial is written with the assumption that You have attended the Introduction to ANSYS Fluent
THE INFLUENCE OF MESH CHARACTERISTICS ON OPENFOAM SIMULATIONS OF THE DRIVAER MODEL
6 th BETA CAE International Conference THE INFLUENCE OF MESH CHARACTERISTICS ON OPENFOAM SIMULATIONS OF THE DRIVAER MODEL Grigoris Fotiadis *, Vangelis Skaperdas, Aristotelis Iordanidis BETA CAE Systems
Adjoint Optimization combined with mesh morphing for CFD applications
Adjoint Optimization combined with mesh morphing for CFD applications Alberto Clarich*, Luca Battaglia*, Enrico Nobile**, Marco Evangelos Biancolini, Ubaldo Cella *ESTECO Spa, Italy. Email: engineering@esteco.com
EnSight Analyzing Visualizing Communicating
EnSight EnSight Analyze, visualize and communicate your simulation data with EnSight. Engineers use this powerful general purpose post-processing tool to gain new design insights and then clearly, effectively
MpCCI: Neutral Interfaces for Multiphysics Simulations
MpCCI: Neutral Interfaces for Multiphysics Simulations Klaus Wolf, Pascal Bayrasy, Carsten Brodbeck, Ilja Kalmykov, André Oeckerath, and Nadja Wirth 1 Introduction In various research and engineering fields,
Simcenter 3D Structures
Simcenter 3D Structures Integrating FE modeling and simulation streamlines product development Benefits Speed simulation processes by up to 70 percent Perform accurate, reliable structural analysis with
Contents. 1 CoreTech System Co., Ltd.
Contents Advanced Support for Intelligent Workflow Improved User Interface 2 Expanded Gate Types.. 2 Enhanced Runner Wizard. 2 Customized Cooling Channel Templates. 3 Parameterized Mesh Generator... 3
FLUENT Secondary flow in a teacup Author: John M. Cimbala, Penn State University Latest revision: 26 January 2016
FLUENT Secondary flow in a teacup Author: John M. Cimbala, Penn State University Latest revision: 26 January 2016 Note: These instructions are based on an older version of FLUENT, and some of the instructions
Team 194: Aerodynamic Study of Airflow around an Airfoil in the EGI Cloud
Team 194: Aerodynamic Study of Airflow around an Airfoil in the EGI Cloud CFD Support s OpenFOAM and UberCloud Containers enable efficient, effective, and easy access and use of MEET THE TEAM End-User/CFD
RBF Morph An Add-on Module for Mesh Morphing in ANSYS Fluent
RBF Morph An Add-on Module for Mesh Morphing in ANSYS Fluent Gilles Eggenspieler Senior Product Manager 1 Morphing & Smoothing A mesh morpher is a tool capable of performing mesh modifications in order
Innovation Intelligence
Innovation Intelligence Efficient CFD Meshing Workflow HyperMesh: Geometry Cleanup & Surface Meshing AcuConsole: Volume Meshing & Analysis Setup Rishi Patil, Product Specialist CFD Alexander Gnech, Application
Coupling GT-SUITE and TAITherm to Accelerate Cabin Simulations
Coupling GT-SUITE and TAITherm to Accelerate Cabin Simulations Dan Marsh Product and Applications Engineer Gamma Technologies LLC d.marsh@gtisoft.com Jon Juszkiewicz Thermal/CFD Engineer ThermoAnalytics
Flow Sim. Chapter 16. Airplane. A. Add-In. Step 1. If necessary, open your ASSEMBLY file.
Chapter 16 A. Add-In. Step 1. If necessary, open your ASSEMBLY file. Airplane Flow Sim Step 2. Click Tools Menu > Add-Ins. Step 3. In the dialog box, scroll down to Flow Simulation and place a check in
Solution Recording and Playback: Vortex Shedding
STAR-CCM+ User Guide 6663 Solution Recording and Playback: Vortex Shedding This tutorial demonstrates how to use the solution recording and playback module for capturing the results of transient phenomena.
smooth coefficients H. Köstler, U. Rüde
A robust multigrid solver for the optical flow problem with non- smooth coefficients H. Köstler, U. Rüde Overview Optical Flow Problem Data term and various regularizers A Robust Multigrid Solver Galerkin
Optimization of under-relaxation factors. and Courant numbers for the simulation of. sloshing in the oil pan of an automobile
Optimization of under-relaxation factors and Courant numbers for the simulation of sloshing in the oil pan of an automobile Swathi Satish*, Mani Prithiviraj and Sridhar Hari⁰ *National Institute of Technology,
Flow Optimization of CC Manifold: Coupling HyperWorks and Cradle Solutions
Flow Optimization of CC Manifold: Coupling HyperWorks and Cradle Solutions Eric Hansenne CAE Manager Michal Wanski, Marc Ratzel Mitsushi Okada Support Engineer COMPANY PROFILE AUTOMOTIVE SUPPLIER PRIVATELY
for multidisciplinary CAE pre- & post-processing ANSA μετα p i o n e e r i n g software systems
TM ANSA μετα p i o n e e r i n g software systems for multidisciplinary CAE pre- & post-processing www.beta-cae.gr ANSA is an advanced multidisciplinary CAE pre-processing tool that provides all the necessary
Tutorial: Hydrodynamics of Bubble Column Reactors
Tutorial: Introduction The purpose of this tutorial is to provide guidelines and recommendations for solving a gas-liquid bubble column problem using the multiphase mixture model, including advice on solver
Ryan C. Hulguin TACC-Intel Highly Parallel Computing Symposium April 10th-11th, 2012 Austin, TX
Ryan C. Hulguin TACC-Intel Highly Parallel Computing Symposium April 10th-11th, 2012 Austin, TX Outline Introduction Knights Ferry Technical Specifications CFD Governing Equations Numerical Algorithm Solver
Software Solutions for the Design and Simulation of Electric Machines. Dr. Markus Anders, CD-adapco
Software Solutions for the Design and Simulation of Electric Machines Dr. Markus Anders, CD-adapco Agenda Software for Electric Machine Design and Simulation: About SPEED SPEED& JMAG SPEED& STAR-CCM+,
Impact of STAR-CCM+ v7.0 in the Automotive Industry Frederick J. Ross, CD-adapco Director, Ground Transportation
Impact of STAR-CCM+ v7.0 in the Automotive Industry Frederick J. Ross, CD-adapco Director, Ground Transportation Vehicle Simulation Components Vehicle Aerodynamics Design Studies Aeroacoustics Water/Dirt
NX for Simulation: Product capabilities in NX 10
for Simulation: Product capabilities in 10 CAE Advanced Simulation Advanced Advanced Fluid Flow Advanced Flow Electronic Systems Space Systems Laminate Composites Response Simulation Durability Wizard
Domain Decomposition: Computational Fluid Dynamics
Domain Decomposition: Computational Fluid Dynamics July 11, 2016 1 Introduction and Aims This exercise takes an example from one of the most common applications of HPC resources: Fluid Dynamics. We will
STAR-CCM+: Ventilation SPRING Notes on the software 2. Assigned exercise (submission via Blackboard; deadline: Thursday Week 9, 11 pm)
STAR-CCM+: Ventilation SPRING 208. Notes on the software 2. Assigned exercise (submission via Blackboard; deadline: Thursday Week 9, pm). Features of the Exercise Natural ventilation driven by localised
Express Introductory Training in ANSYS Fluent Workshop 02 Using the Discrete Phase Model (DPM)
Express Introductory Training in ANSYS Fluent Workshop 02 Using the Discrete Phase Model (DPM) Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry
Problem description. The figure shows a disc braking system.
Problem description Problem 34: Thermo-mechanical coupling analysis of a disc braking system The figure shows a disc braking system. Applied pressure Piston Brake pad Brake disc Fixed plate Initially,
Modeling Supersonic Jet Screech Noise Using Direct Computational Aeroacoustics (CAA) 14.5 Release
Modeling Supersonic Jet Screech Noise Using Direct Computational Aeroacoustics (CAA) 14.5 Release 2011 ANSYS, Inc. November 7, 2012 1 Workshop Advanced ANSYS FLUENT Acoustics Introduction This tutorial
Using the Discrete Ordinates Radiation Model
Tutorial 6. Using the Discrete Ordinates Radiation Model Introduction This tutorial illustrates the set up and solution of flow and thermal modelling of a headlamp. The discrete ordinates (DO) radiation
µ = Pa s m 3 The Reynolds number based on hydraulic diameter, D h = 2W h/(w + h) = 3.2 mm for the main inlet duct is = 359
Laminar Mixer Tutorial for STAR-CCM+ ME 448/548 March 30, 2014 Gerald Recktenwald gerry@pdx.edu 1 Overview Imagine that you are part of a team developing a medical diagnostic device. The device has a millimeter
Computational Fluid Dynamics autumn, 1st week
Computational Fluid Dynamics 2016 autumn, 1st week 1 Tamás Benedek benedek [at] ara.bme.hu www.ara.bme.hu/~benedek/cfd/icem The most important rule: Dont use space or specific characters in: File names,
Contents. 1 CoreTech System Co., Ltd.
Contents Advanced Support for Intelligent Workflow Improved User Interface 2 Expanded Gate Types.. 2 Enhanced Runner Wizard. 2 Customized Cooling Channel Templates. 3 Parameterized Mesh Generator... 3
Solid Conduction Tutorial
SECTION 1 1 SECTION 1 The following is a list of files that will be needed for this tutorial. They can be found in the Solid_Conduction folder. Exhaust-hanger.tdf Exhaust-hanger.ntl 1.0.1 Overview The
VIRTUAL UPSCALING Annual meeting 20/12/2017 Miguel Seco Calleja Haritz Vallejo Artola
VIRTUAL UPSCALING Annual meeting 20/12/2017 Miguel Seco Calleja Haritz Vallejo Artola Parque Tecnológico de San Sebastián Mikeletegi Pasealekua, 7 E-20009 Donostia-San Sebastián - Gipuzkoa www.tecnalia.com
Using a Single Rotating Reference Frame
Tutorial 9. Using a Single Rotating Reference Frame Introduction This tutorial considers the flow within a 2D, axisymmetric, co-rotating disk cavity system. Understanding the behavior of such flows is
Hydro-elastic analysis of a propeller using CFD and FEM co-simulation
Fifth International Symposium on Marine Propulsors smp 17, Espoo, Finland, June 2017 Hydro-elastic analysis of a propeller using CFD and FEM co-simulation Vesa Nieminen 1 1 VTT Technical Research Centre
Agenda. 9:00 Welcome. 1:00 - Computing Utilities. 9:15 - Mechanical Demonstration. 1:30 - CFD Update. 3:00 Break 3:15 ANSYS Customization Toolkit
Agenda 9:00 Welcome 1:00 - Computing Utilities Introductions HPC What is new at CAEA GPU 9:15 - Mechanical Demonstration CAD connection utilities (within the CAD API) Mechanical setup Rigid Bodies, Joints,
ANSYS/LS-Dyna. Workbench Using. Steven Hale Senior Engineering Manager CAE Associates, Inc. June 13, CAE Associates
ANSYS/LS-Dyna Customization in Workbench Using ACT Steven Hale Senior Engineering Manager CAE Associates, Inc. June 13, 2013 2013 CAE Associates CAE Associates CAE Associates is an engineering services
Shared Memory Programming With OpenMP Exercise Instructions
Shared Memory Programming With OpenMP Exercise Instructions John Burkardt Interdisciplinary Center for Applied Mathematics & Information Technology Department Virginia Tech... Advanced Computational Science
OPEN MP and MPI on Kingspeak chpc cluster
OPEN MP and MPI on Kingspeak chpc cluster Command to compile the code with openmp and mpi /uufs/kingspeak.peaks/sys/pkg/openmpi/std_intel/bin/mpicc -o hem hemhotlz.c -I /uufs/kingspeak.peaks/sys/pkg/openmpi/std_intel/include
Spring Element with Nonlinear Analysis Parameters (Multi-Step Analysis)
WORKSHOP 32c Spring Element with Nonlinear Analysis Parameters (Multi-Step Analysis) Objectives: Demonstrate the effects of geometric nonlinear analysis in SOL 106 (nonlinear statics). incremental loads
Domain Decomposition: Computational Fluid Dynamics
Domain Decomposition: Computational Fluid Dynamics December 0, 0 Introduction and Aims This exercise takes an example from one of the most common applications of HPC resources: Fluid Dynamics. We will
Supported Platforms and Hardware Requirements & Recommendations
Supported Platforms and Hardware Requirements & Recommendations GT-SUITE V2019 This document is intended to inform potential customers and current users about what software and hardware is needed to run