Proficy* HMI-SCADA G ETTING S TARTED. ON THE A PPLE ipad OR i P HONE C LIENT

Transcription

1 Proficy* HMI-SCADA G ETTING S TARTED ON THE A PPLE ipad OR i P HONE C LIENT July 2014

2 Disclaimer of Warranties and Liability The information contained in this manual is believed to be accurate and reliable. However, GE Intelligent Platforms, Inc. assumes no responsibilities for any errors, omissions or inaccuracies whatsoever. Without limiting the foregoing, GE Intelligent Platforms, Inc. disclaims any and all warranties, expressed or implied, including the warranty of merchantability and fitness for a particular purpose, with respect to the information contained in this manual and the equipment or software described herein. The entire risk as to the quality and performance of such information, equipment and software, is upon the buyer or user. GE Intelligent Platforms, Inc. shall not be liable for any damages, including special or consequential damages, arising out of the use of such information, equipment and software, even if GE Intelligent Platforms, Inc. has been advised in advance of the possibility of such damages. The use of the information contained in the manual and the software described herein is subject to GE Intelligent Platforms, Inc. standard license agreement, which must be accepted by the buyer or user before the use of such information, equipment or software. Trademark Notices 2014 General Electric Company. All rights reserved. Proficy is a trademark of GE Intelligent Platforms, Inc., a wholly-owned subsidiary of General Electric Company. * Indicates a trademark of General Electric Company and/or its subsidiaries. Microsoft is a registered trademark of Microsoft Corporation, in the United States and/or other countries. Apple, ipad, and iphone are registered trademarks of Apple Inc.; registered in the U.S. and other countries. All other trademarks are the property of their respective owners. All other product names and marks identified throughout this book are trademarks or registered trademarks of their respective companies. They are used throughout this book in editorial fashion only. No such use, or the use of any trade name, is intended to convey endorsement or affiliation.

3 No part of this publication may be reproduced in any form, or stored in a database or retrieval system, or transmitted or distributed in any form by any means, electronic, mechanical photocopying, recording or otherwise, without the prior written permission of GE Intelligent Platforms. Information contained herein is subject to change without notice. We want to hear from you. If you have comments, questions, or suggestions about our documentation, send them to the following address: doc@ge.com

4 Table of Contents About This Guide... 1 Using Proficy HMI-SCADA ipad or iphone Client... 2 Available Options... 6 Adding a Web Server (Host)... 8 Interacting with the Server... 9 Understanding the Host Canvas... 9 Clicking and Double-Clicking... 9 Right-Clicking Dragging Scrolling Using the Touch Keyboard Special Keys Support Using the On-Screen Toolbar Application Settings Tips for Working with CIMPLICITY and ifix Best Practices iv

5 About This Guide Thank you for taking the time to install and use the Proficy* HMI-SCADA product on your Apple ipad or iphone! The Proficy HMI-SCADA ipad or iphone client allows ifix, CIMPLICITY, and Plant Applications customers to connect to their respective Proficy WebSpace web servers from the Apple ipad or iphone client. By connecting through your ipad or iphone, you can view and interact remotely with ifix, CIMPLICITY, and Plant Applications with a high degree of usability. This document describes how to use Proficy HMI-SCADA ipad or iphone client product. The Proficy HMI-SCADA application for the ipad or iphone can only connect to: CIMPLICITY 8.2 (it is recommended SIM 6 or newer for 8.2, which provides the capability to create shortcuts). CIMPLICITY 9.0 or greater ifix 5.5 SP2 or greater ifix 5.8 or greater Plant Applications or greater Be aware that whenever an ipad or iphone client is connected to a web server (Proficy WebSpace Server), one client license is consumed. The number of clients that can connect to your web server, depends on license key. For example, in the Proficy License Viewer, it s listed in ifix as the Number of Web Server Connections and in CIMPLCITY as the Number of GlobalView Connections. 1

6 Using Proficy HMI-SCADA ipad or iphone Client When you first launch the ipad or iphone client (ProficySCADA), you will be presented with the Host List that allows you to select a Proficy Webspace Server Server to connect to, as shown in the following figure. Figure 1: Proficy HMI-SCADA ipad Client Host List. 2 Getting Started with Proficy* HMI-SCADA on the ipad or iphone

7 The Host List represents a combination of host servers from several different sources, such as: Discovered hosts: A host discovery mechanism automatically locates the Proficy HMI-SCADA Windows Hosts on the local network (the current subnet) to which the ipad or iphone is connected. Host discovery will not work in cases where your ipad or iphone is only connected to a 3G network, and will only discover hosts running Proficy WebSpace. If newer hosts have recently been booted-up and are not showing in the discovered host list, tap the refresh button on the bottom left corner of the screen to refresh the list. Recent hosts: A list of the recent hosts that have been connected to. Favorite hosts: A favorite hosts list, which is user editable. When connecting to a host, you may choose to store the host (including its address and other relevant settings) in the favorite hosts list. When a host is selected from the list, its details will appear in the panel on the right, as shown in the following figure. 3

8 Figure 2: Selecting a Host 4 Getting Started with Proficy* HMI-SCADA on the ipad or iphone

9 Figure 3: When a host is selected, the right side panel shows a detailed view for that host. In order to connect to a host web server, select it from the host list on the left, and then tap the blue Connect button on the right. The detail panel displays information such as the host s name, IP address, and availability and network latency information (if available). This panel also includes an Add to Favorites button that stores the host in the ipad or iphone client s Favorites database. Adding a host to the Favorites database allows you to customize certain parameters regarding that host, including port number and the default application that is launched when the host is connected. 5

10 Available Options The following are the currently supported favorite options: Auto Zoom: Auto Zoom improves session usability by automatically zooming and panning into active windows, thereby making it easier to tap buttons and other user-interface elements in those windows. When a window is closed, the session will automatically zoom out to fit the newly active window. Auto Launch: Auto Launch automatically launches the specified application when the session is launched. To connect to an ifix WebSpace Server, the name provided should be ifix. To connect to a CIMPLICITY server, the name should be CimView, CimLayout, or any shortcut name configured in Proficy WebSpace server administration Applications tab. The Auto Launch setting in the Favorite settings, overrides the application-level Auto Launch setting. To connect to a PlantApplications server, use PlantApps in the Auto Launch field. Leaving this field empty will cause application errors. Port Number: While Proficy HMI-SCADA sessions use port number 491 by default, this setting allows you to use a different TCP/IP port to connect to your host. The Proficy HMI-SCADA host must be configured to accept connections on the specified port, and any firewalls must be configured to allow incoming connections on the specified port. Options: Use this field to supply additional optional parameters for the application specified in the Auto Launch field, using the r command-line. For example, to specify a user screen: For ifix: -r IFIX /puserscreen.grf For CIMPLICITY: -r CIMVIEW "c:\screens\userscreen.cim" For Plant Applications: -r PA /d userdisplay NOTE: The Options command does not replace the Auto Launch option. 6 Getting Started with Proficy* HMI-SCADA on the ipad or iphone

11 Image Compression: Image compression decreases the color resolution of the session from 16-bit color to 8- bit color. This slightly reduces the image quality of pictures and other images, but it decreases the session s bandwidth utilization. This option is especially useful for remote sessions running over 3G connectivity, or other lower bandwidth connections. The following figure shows an example of the Host Settings as they appear in the ipad or iphone application: Figure 4: The host settings pane. NOTE: The host settings pane will only appear for hosts that have been added to the Favorites list not for hosts in the Recent or Discovered Hosts lists. 7

12 Adding a Web Server (Host) In cases where you need to connect to a web server (host) for the Proficy Webspace Server that is not on the local network, tap the + button on the top to add your own host, specifying either its Name or its IP address. The Add Host dialog box appears, as shown in the following figure. Figure 5: The Add Host screen. The Add Host dialog box allows you to enter an IP address or click the Name button to enter a host name that the Proficy HMI-SCADA ipad or iphone client will connect to. You can also specify the host name in the Name field as a local host name (without a Fully Qualified Domain Name (FQDN)) if the host name resolves itself via a reverse IP lookup process, or specify the FQDN in the URL. 8 Getting Started with Proficy* HMI-SCADA on the ipad or iphone

13 The Add Host screen also allows you to enter user credentials that will be stored on your ipad or iphone to prevent you from having to enter those every time you connect to the host. If you do not enter user credentials, the ipad or iphone client will prompt you for them every time you connect to the host. NOTE: Cached user credentials are stored securely in the ios Keychain a secure, encrypted storage mechanism designed to protect private data. After entering host information, tap the Add button to add the host to your ipad or iphone s Favorites database. Tap the Connect button to connect to your host. Interacting with the Server Once a session is established, you interact with the host web server using several multitouch gestures. These gestures allow you to interact naturally with applications running on the host, even though the ipad or iphone lacks a mouse and keyboard. The following are the common operations achievable using a mouse and keyboard, and a description of how to perform them using the ipad or iphone client. Understanding the Host Canvas When connecting to a host using the Proficy HMI-SCADA ipad or iphone client, the image you see on the screen is essentially a canvas just like any other canvas on the ipad or iphone. You can pinch in and out to zoom in and out of the image, and drag your finger across the screen to pan to different areas of the image. This behavior is identical to what you would find in Safari, Photos, and many other ipad or iphone applications. Clicking and Double-Clicking In order to click or double-click a button or other user interface component from the host, simply tap or double-tap on the touchscreen. If the user interface component on the host is too small to hit accurately with your finger, you can temporarily zoom in to enlarge it. 9

14 Right-Clicking In order to achieve a right mouse click, perform a two-finger tap at the position where you would like the right-click to occur. The actual position of the right-click will be at the position of your left finger. Figure 6: Right-clicking by tapping two fingers on the screen. Dragging In order to drag the mouse over the application (for dragging windows, selecting text in a document, and so on), tap and hold at the area of the screen where you would like the drag operation to begin, and then begin dragging your finger across the screen. At this point, an on-screen indicator will appear indicating that a drag operation is in progress. Hold your finger steady for a brief moment before you begin dragging it. Otherwise, the Proficy HMI-SCADA ipad or iphone client will simply pan the host image, and dragging will not occur. Scrolling In order to easily scroll through a document, drag two fingers vertically. Dragging upwards scrolls down, while dragging downwards scrolls up. The further you go in each direction, the faster the scrolling. 10 Getting Started with Proficy* HMI-SCADA on the ipad or iphone

15 Using the Touch Keyboard To type in an application, open the ipad or iphone s touch keyboard. Perform a threefinger tap anywhere on the screen by simultaneously putting three fingers anywhere and immediately releasing them. The keyboard can be closed the same way. Another option is to bring up the on-screen toolbar and use the keyboard buttons on the toolbar. To expose the on-screen toolbar, press and hold a single finger anywhere on the screen. This will bring up the toolbar for several seconds until it is automatically hidden. Special Keys Support The ipad or iphone client adds an extra row of keys to the top of the soft keyboard. This row includes Ctrl, Shift, Alt, Tab, Esc, Home, End, Insert, Delete, and so on. For example, to copy and paste text, highlight the text and press the Ctrl + c button to copy it. Then press the Ctrl + v button to paste the text. To see all the special keys, scroll the keys on the right side of the top row by sliding a finger to the left and right over the keys. Using the On-Screen Toolbar The on-screen toolbar exposes some options while the session is active. In order to expose it, press and hold a single finger anywhere on the screen. This will bring up the toolbar for several seconds, until it will be automatically hidden. The following figure shows an example of the on-screen toolbar. Figure 7: The on-screen toolbar. To pin the toolbar so it does not automatically hide, tap the pushpin icon on the left. Tap it again to unpin the keyboard so it automatically hides. 11

16 Other buttons available on the toolbar include: Keyboard Toggle: Tapping the A button toggles the touch-screen keyboard. Auto-Zoom Toggle: This button (indicated by a rectangle containing vertical and horizontal arrows), toggles the ipad or iphone client s auto-zoom feature. Tapping the Auto-Zoom button again disables this feature and zooms out to show the entire screen. Disconnect: The Disconnect button closes the session and flips back to the main host list screen. Application Settings The ProficySCADA entry under Settings supports the following entries: Pin Toolbar: When the Pin Toolbar option is set to ON, the toolbar will be displayed when the ipad or iphone client is started. Auto Connect: When Auto Connect is ON, the client automatically connects to the last host the user accessed. Auto Launch: If an application is specified in the Auto Launch field, the ProficySCADA client connects to the host and automatically starts the application, bypassing the Program Window. However, if an application name is entered in the Auto Launch option of a Favorite Host, that application will be launched upon connection, overriding the ProficySCADA application s Auto Launch setting. 12 Getting Started with Proficy* HMI-SCADA on the ipad or iphone

17 The following figure shows an example of the ProficySCADA application Startup Options: Figure 8:Startup Options. Tips for Working with CIMPLICITY and ifix Be aware of the following tips when working with the Proficy HMI-SCADA application on the ipad or iphone: Network usage can vary considerably based on the amount of data being displayed and updated in your screens/pictures. Be sure to take this into consideration when building or displaying your screens/pictures. Exporting files from your HMI/SCADA application will only give you access to your web server and its mapped drives. When zooming, be sure to make accurate clicks. Ensure you set up the Autolock feature on your ipad or iphone to prevent unauthorized access. Be aware that you can take a screen capture of your SCADA applications from the ipad or iphone by holding down the Home button and the Sleep/Wake button simultaneously. The screen capture is copied to your Saved Photos. Integrated Windows authentication is only available to users who sign in from Windows computers that are members of the same domain as the Proficy WebSpace Server. 13

18 Best Practices Be aware of the following best practices when working with the Proficy HMI-SCADA application on the ipad or iphone: Minimize keyboard input. Use large buttons. Use care with data entry objects, especially sliders. Run your application with the Autozoom enabled to allow for easier navigation. Become familiar with using two fingers for zooming in/out (especially if auto zoom is deactivated). Many pop-up screens and menus (for instance, rightclick menus) are very difficult to read/use unless they are zoomed in. Use large buttons to help with key pad navigation. Use Buttons and Ramps instead of Sliders for ease of use. Lock your device to ensure you do not inadvertently invoke control elements while the ipad or iphone is in your briefcase, backpack, and so on, and to prevent unauthorized access. Be sure to use long (strong) password to protect your device, as opposed to the simple password option. For a complete list of bugs, known issues, and workarounds, please visit the GE Intelligent Platforms, Inc. support web site at: or call: Americas: or (if toll free 800 option is unavailable) Europe, Middle-East, & Africa: or (if toll free 800 option is unavailable or dialing from a mobile telephone) Asia Pacific: or (for India, Indonesia & Pakistan) 14 Getting Started with Proficy* HMI-SCADA on the ipad or iphone