DESKLIFT DL5 PRODUCT DATA SHEET

Transcription

1 PRODUCT DATA SHEET DESKLIFT DL Features: Compact design where guide and actuator function are an integrated unit Short cable mounted on the DL for connection to CBD4/CBD/CBD6 with separate DESKLINE motor cable Max. thrust 800 N (per leg) Max. speed: 38 mm/sec. Installation dimension 64 mm or 44 mm (short variant) Stroke length 00 mm or 0 mm Dimensions column: 0 x 80 mm (outer tube) and 43, x 73, mm (inner tube) Dimension motor housing: 177 x 97 x 46 mm Bending moment: My = max. 0 Nm dynamic Colour: Available in black (RAL 900), silver grey (RAL 9006) or white (RAL 9016), gloss Low noise level Hall sensor enables parallel drive with CBD4/CBD/ CBD6 Mounting bracket for crossbar in parallel system ( x 1 mm) Options Reinforced column for No Crossbar desks (N) Usage Single or 2, 3, 4 parallel drive or even multiparalle with up to 16 columns Duty cycle: % ~ 6 min. per hour or 2 min. continuous use at full load Ambient temperature: + to + C Compatible with control boxes CBD4//6 and all DESKLINE controls Approved according to EN and UL 962 Storage and transport temperature: - C to +70 C The DL DESKLIFT is a compact 2-part lifting column, which is a perfect choice for a wide range of different desk applications especially in the office area. The DL has a compact motor housing, which is almost invisible in the tabletop construction and the column is very sturdy so a crossbar is not necessary. The DL has the same outer dimensions and mounting holes as the 3-part DL6 column, which make them compatible and they can be used in the same tabletop and table foot construction. The DL is available in several standard colours and lengths to fit into a wide range of desk designs. The DL system is controlled by the DESKLINE CBD4, CBD or CBD6 control boxes. No matter, which box is preferred, they all ensure optimal parallel drive and a pleasant low noise level. The DL can be used as a single column or in a 2, 3 or 4 parallel system.

2 Dimensions: At a fully retracted length of only 64 mm +4/-0 mm and a stroke length of 00 mm ± 2 mm it is possible for a standard system to obtain an adjustment interval of the table top of e.g mm. Thus the desk can be used for sitting as well as standing work. Standard DL: xM xM xM6 8 R xM LINAK A/S DL001A 17 DL No crossbar: xM6 8 R xM xM

3 Technical specifications: Type Thrust max. (N) per DL Self-lock (N) per DL Speed at 0 load (mm/s) Duty cycle (%) Pitch (mm) DL Above specifications are in connection with control box CBD4. Speed/thrust curves for DL and CBD4: 2 x DL with CBD4 4 0 W transformer 0 W transformer x DL (equally loaded) with CBD

4 Speed/thrust curves for DL and CBD4: 4 x DL (equally loaded) with CBD

5 Speed/thrust curves for DL and CBD: 2 x DL with CBD Speed/thrust curves for DL and CBD6: 2 x DL with CBD The above curves applie to a centrally placed load. At moment load there will be an increased friction in the columns, which will reduce the lifting force correspondingly. The end-stop system in the DL is based on a buffer system meaning that you must be aware of the lengths when initialising. The products must be able to drive: Inwards direction: built-in dimension - tolerances mm Outwards direction: built-in dimension + stroke length + tolerances + mm

6 Ordering example: DL B N Installation dim.: Stroke length: Motor type: Option: Colour: Monting bracket: Cable: Spindle type: Actuator type: 64 = 64 mm 44 = 44 mm 00 = 00 mm 0 = 0 mm 0 = Standard 0 = Standard N = No Crossbar A = Grey RAL 9006 B = Black RAL 900 D = White RAL = None 1 = 1 x x 8 mm with 2 x M8 0 = 0 mm (Standard) 0 = mm pitch (Standard) DL = Standard No Crossbar is possible with both installation lenghts. Motor cables must be ordered separately: Motor cables dimensions: 00mm L Motor cables must be ordered separately. Ordering numbers: (L = 0 mm black motor cable) (L = 00 mm black motor cable) (L = 00 mm black motor cable) (L = 00 mm black motor cable) For mounting instructions and guidance in usage, please see the relevant User Manual.

7

8 Terms of use The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing accurate and up-to-date information on its products. However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and changes without prior notice. Therefore, LINAK cannot guarantee the correct and actual status of said information on its products. While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed in its catalogues or other written material drawn up by LINAK. All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK. Copyright LINAK MA M D. Chapter..1