LA Series In-line Linear Actuators

Size: px

Start display at page:

Download "LA Series In-line Linear Actuators"

Alexina Green
6 years ago
Views:

LA Series In-line Linear Actuators High quality, CE

proof Low energy consumption, low noise Suitable

1 LA Series In-line Linear Actuators High quality, CE marked High load capacity with precision and synchronous control 6000N load max., speed up to 55mm/s IP66 protection; water and dust proof Low energy consumption, low noise Suitable applications including home automation, medical devices, transportation and industrial automation

2 Product Overview Motion Control Products Ltd. P a g e 1 Tel.: (+44)

3 Contents PRODUCT OVERVIEW... 1 LA26M IN-LINE LINEAR ACTUATOR Φ26MM... 3 LA35M IN-LINE LINEAR ACTUATOR Φ35MM... 5 LA38M IN-LINE LINEAR ACTUATOR Φ38MM... 7 LA45M IN-LINE LINEAR ACTUATOR Φ45MM... 9 LA52M IN-LINE LINEAR ACTUATOR Φ52MM APPENDIX HALL EFFECTS OVER-CURRENT PROTECTION LIMIT SWITCH CONTROL BOX / CONTROLLER ACCESSORIES ACTUATOR PART NUMBER CONFIGURATION EXPLODED VIEW Motion Control Products Ltd. P a g e 2

LA26M In-line Linear Actuator Φ26mm FEATURES Integrated with high-efficiency 12 / 24VDC brush motor and planetary gearbox Outer tube material in Aluminum T6061 (in black) and inner tube in stainless

5 3 times of the pull/push force No-load noise: 45-48dB Ambient Temperature: -5 C - +40 C (storage: -40 C ~ +70 C) TECHNICAL SPECIFICATIONS 12VDC/ 24VDC power supply, permanent magnet brushed motor

4 LA26M In-line Linear Actuator Φ26mm FEATURES Integrated with high-efficiency 12 / 24VDC brush motor and planetary gearbox Outer tube material in Aluminum T6061 (in black) and inner tube in stainless steel 304 Compact size and elegant design IP66 protection class Duty cycle: 2 minutes in use followed by 18 min rest With or without Over-current Circuit protection Self-locking force: times of the pull/push force No-load noise: 45-48dB Ambient Temperature: -5 C C (storage: -40 C ~ +70 C) TECHNICAL SPECIFICATIONS 12VDC/ 24VDC power supply, permanent magnet brushed motor Maximum load (N) Gear Ratio 1:49 1:71 1:139 maximum load (mm/s) Standard stroke* (mm) Max. current (A) 1.4 (@12VDC) / 0.7 (@24VDC) * Customised stroke may be available upon request. PERFORMANCE CURVES Note: Accuracy: ±10%. In general, applications in the dashed area are not recommended Motion Control Products Ltd. P a g e 3 Tel.: (+44)

5 LA26M MECHANICAL DIMENSIONS (Unit: mm) S= Stroke Dimensions Unit L Standard (Without over current protection etc.) mm 150 With over-current protection mm 170 With Hall mm 170 With Limit Switch mm Under development Note: Over-current protection and Hall sensor cannot be fitted at the same time in the actuator. The only way is to connect the over-current protection on the wiring or in the controller MATCHED CONTROL BOX Single Unit Controller Asynchronous Controller (back-up battery type) Connect 2pcs actuators Asynchronous Controller (Transformer type) Connect 3pcs actuators Motion Control Products Ltd. P a g e 4

LA35M In-line Linear Actuator Φ35mm FEATURES Compact size and elegant design Powder coated 45# steel body ( S as standard) or Stainless steel 304 S/S or Aluminum T6061 AL (as options) IP66 protection

10% or 2 minutes in use followed by 18 min rest Over-current circuit protection Self-locking force: 1.

6 LA35M In-line Linear Actuator Φ35mm FEATURES Compact size and elegant design Powder coated 45# steel body ( S as standard) or Stainless steel 304 S/S or Aluminum T6061 AL (as options) IP66 protection class Hall sensors for precision control and positioning Integrated with high-efficiency 24VDC motor and planetary gearbox Duty cycle: Max. 10% or 2 minutes in use followed by 18 min rest Over-current circuit protection Self-locking force: times of the pull/push force Ambient temperature: -5 C C (storage: -40 C ~ +70 C) No-load noise: 45-48dB TECHNICAL SPECIFICATIONS 12VDC/ 24VDC power supply, permanent magnet brushed motor Maximum load (N) Gear Ratio 1:5 1:14 1:27 1:27 1:27 1:71 1:71 1:139 maximum load (mm/s) Standard stroke* (mm) 50 / 100 / 150 / 200 /250 / 300 / 350 / 400 Max. current (A) 3.5 (@12VDC) / 1.5 (@24VDC) * Customised stroke may be available upon request. PERFORMANCE CURVES Note: In general, applications in the dashed area are not recommended Motion Control Products Ltd. P a g e 5 Tel.: (+44)

LA35M MECHANICAL DIMENSIONS (Unit: mm) S= Stroke LA35M Unit L (Length) Standard L (Length) With Hall or over current protection Gear Ratio (5, 14, 27) mm 178 (If Stroke>400mm: 198) 200 (If

7 LA35M MECHANICAL DIMENSIONS (Unit: mm) S= Stroke LA35M Unit L (Length) Standard L (Length) With Hall or over current protection Gear Ratio (5, 14, 27) mm 178 (If Stroke>400mm: 198) 200 (If Stroke>400mm: 220) Gear Ratio (71, 139) mm 188 (If Stroke>400mm: 208+S) 208 (If Stroke>400mm: 228) Note: Over-current protection and Hall sensor cannot be fitted at the same time in the actuator. The only way is to connect the over-current protection on the wiring or in the controller MATCHED CONTROL BOX Single Unit Controller (transformer type) Single Unit Controller (back-up battery type) Asynchronous Controller (back-up battery type) Connect 2pcs actuators Synchronous Controller (back-up battery type) Synchronous Controller (transformer type) Asynchronous Controller (transformer type) Connect 3pcs actuators Motion Control Products Ltd. P a g e 6

LA38M In-line Linear Actuator Φ38mm FEATURES Compact size and elegant design Outer tube material in powder coated aluminum T6061 IP66 protection class Hall sensors for precision control and

8 LA38M In-line Linear Actuator Φ38mm FEATURES Compact size and elegant design Outer tube material in powder coated aluminum T6061 IP66 protection class Hall sensors for precision control and positioning With built-in limit switch Integrated with high-efficiency 24VDC motor and planetary gearbox Duty cycle: Max. 10% or 2 minutes in use followed by 18 min Rest Over-current circuit protection Self-locking force: times of the pull/push force Ambient temperature: -5 C C (storage: -40 C ~ +70 C) No-load noise: 45-48dB TECHNICAL SPECIFICATIONS 12VDC/ 24VDC power supply, permanent magnet brushed motor Maximum load (N) Gear Ratio 1:5 1:14 1:27 1:27 1:27 1:71 1:71 1:139 maximum load (mm/s) Standard stroke* (mm) 50 / 100 / 150 / 200 /250 / 300 / 350 / 400 * Customised stroke may be available upon request. Recommended max. current: 3.5A@12VDC or 1.5A@24VDC PERFORMANCE CURVES Note: In general, applications in the dashed area are not recommended Motion Control Products Ltd. P a g e 7 Tel.: (+44)

LA38M MECHANICAL DIMENSIONS (Unit: mm) S= Stroke LA38M Unit L (Length) Standard L (Length) With Hall or over current protection Gear Ratio (5, 14, 27) mm 200 220 Gear Ratio (71, 139) mm 210 230 Note:

The only way is to connect the over-current protection on the wiring or in the controller MATCHED CONTROL BOX Single Unit Controller (Transformer type) Single Unit Controller (back-up battery type)

9 LA38M MECHANICAL DIMENSIONS (Unit: mm) S= Stroke LA38M Unit L (Length) Standard L (Length) With Hall or over current protection Gear Ratio (5, 14, 27) mm Gear Ratio (71, 139) mm Note: Over-current protection and Hall sensor cannot be fitted at the same time in the actuator. The only way is to connect the over-current protection on the wiring or in the controller MATCHED CONTROL BOX Single Unit Controller (Transformer type) Single Unit Controller (back-up battery type) Asynchronous Controller (back-up battery type) Connect 2pcs actuators Asynchronous Controller (Transformer type)- Connect 3pcs actuators Synchronous Controller (Transformer type) Precision Controller Synchronous Controller (back-up battery type) Motion Control Products Ltd. P a g e 8

LA45M In-line Linear Actuator Φ45mm FEATURES Compact size and elegant design Outer tube material in powder coated 45# steel and inner tube Stainless steel 304 IP66 protection class Hall sensors for

10 LA45M In-line Linear Actuator Φ45mm FEATURES Compact size and elegant design Outer tube material in powder coated 45# steel and inner tube Stainless steel 304 IP66 protection class Hall sensors for precision control and positioning Integrated with high-efficiency 24VDC brushed motor and planetary gearbox Duty cycle: max. 10% or 2 minutes in use followed by 18 min rest Self-locking force: times of the pull/push force Ambient temperature: -5 C C (storage: -40 C ~ +70 C) No-load noise: 45-48dB TECHNICAL SPECIFICATIONS 12VDC/ 24VDC power supply, permanent magnet motor Maximum load (N) Gear Ratio 1:5 1:14 1:19 1:27 1:51 1:71 maximum load (mm/s) Standard stroke* (mm) 50 / 100 / 150 / 200 /250 / 300 / 350 / 400 * Customised stroke may be available upon request. Recommended max. current: or 6A@24VDC PERFORMANCE CURVES Note: Generally, applications in the dashed area are not recommended. Motion Control Products Ltd. P a g e 9 Tel.: (+44)

LA45M MECHANICAL DIMENSIONS (Unit: mm) S= Stroke LA45M Unit L (Length) Standard, without Hall or over current protection L (Length) With Hall or over current protection mm 248 268 Note: Over-current

11 LA45M MECHANICAL DIMENSIONS (Unit: mm) S= Stroke LA45M Unit L (Length) Standard, without Hall or over current protection L (Length) With Hall or over current protection mm Note: Over-current protection and Hall sensor cannot be fitted at the same time in the actuator. The only way is to connect the over-current protection on the wiring or in the controller MATCHED CONTROL BOX Asynchronous Controller (Transformer type) Connect 3pcs actuators Motion Control Products Ltd. P a g e 10

LA52M In-line Linear Actuator Φ52mm FEATURES Compact size and elegant design Aluminium T6061 body in black Integrated with high-efficiency 12V/ 24VDC motor and planetary gearbox Hall sensors for

12 LA52M In-line Linear Actuator Φ52mm FEATURES Compact size and elegant design Aluminium T6061 body in black Integrated with high-efficiency 12V/ 24VDC motor and planetary gearbox Hall sensors for precision control and positioning With built-in limit switch Duty cycle: max. 10% or 2 minutes in use followed by 18 min rest Self-locking force: times of the pull/push force IP66 protection class Ambient Temperature: -5 C C (storage: -40 C ~ +70 C) No-load noise: 45-48dB TECHNICAL SPECIFICATIONS 12VDC/ 24VDC power supply, permanent magnet motor Maximum load (N) Gear Ratio 1:3.7 1:13.7 1:19.2 1:32.5 1:50.9 1:71.2 maximum load (mm/s) Standard stroke* (mm) 50 / 100 / 150 / 200 /250 / 300 / 350 / 400 * Customised stroke may be available upon request. Recommended max. current: or 8A@24VDC PERFORMANCE CURVES Motion Control Products Ltd. P a g e 11 Tel.: (+44)

LA52M MECHANICAL DIMENSIONS (Unit: mm) S= Stroke LA52M Unit L (Length) Standard without Hall or over current protection L (Length) With Hall or over current

13 LA52M MECHANICAL DIMENSIONS (Unit: mm) S= Stroke LA52M Unit L (Length) Standard without Hall or over current protection L (Length) With Hall or over current protection mm MATCHED CONTROL BOX Asynchronous Controller (Transformer type) Connect 3pcs actuators Motion Control Products Ltd. P a g e 12

14 Appendix Hall Effects The function of hall sensor is to provide a signal feedback to the receiver to judge the motor speed. If we know how many signals hall sensor can produce in one circle, we will know how many signals the hall sensor can provide to the receiver when the motor runs one circle and then we can control the actuator speed and stroke precisely. TECHNICAL SPECIFICATIONS 1. Brown: Motor + 2. Blue: Motor - 3. Black: Hall GND 4. Red: Hall Vcc 5. Green: Hall A V out 6. White: Hall B V out Item Units Code Test condition Min. Mid. Max. Input Voltage V Vcc Input Current ma Ic Vce=12V; Gauss < Motion Control Products Ltd. P a g e 13 Tel.: (+44)

Over-current Protection Function: 1. Over current protection device is used to protect the motor from burning out when the actuator is in stall status for a long time. 2.

15 Over-current Protection Function: 1. Over current protection device is used to protect the motor from burning out when the actuator is in stall status for a long time. 2. With over current protection device, no damage will be occurred when the actuator travels to the end position. 3. Over current protection can be used to disconnect the power supply when the actuator is over loaded. Parameter: Circuit Breaking Current Model LA26M LA35M / LA38M LA45M / LA52M 12VDC 1.0A A 14.0A 24VDC 0.5A A 7.0A 1. The anode (+) and cathode (-) for input and output circuit can be interchangeable, input voltage is 12VDC or 24VDC. 2. The circuit breaking response time is s Notes: 1. The ambient temperature range must be +5 C to +40 C, and storage temperature is -40 C to +70 C 2. Max duty cycle is 10% or 2 minutes in use followed by 18 minutes rest Limit Switch Limit switch is used to test whether an object moves to the limit position. The principle is that when the object touches the limit switch, the normally open point of the switch closes and the normally closed point turns off to control circuit or receive signals. Notes: 1. Actuator size varies and to be advised separately upon request 2. Special accessories can be customised as required 3. For LA38M & LA52M series actuators only. Motion Control Products Ltd. P a g e 14

Control Box / Controller ORDERING CONFIGURATION CB H/C 110/220 12/24 S W B 1 2 3 4 5 6 7 1 Type 2

12VDC, 24VDC, 110VAC, 220VAC 4 Output voltage: 12VDC, 24VDC 5 Controller function (S: synchronous

Handset (W: wired handset, WL: wireless handset, B: with battery) 7 Battery MODEL OVERVIEW

of Actuator to control Power Type Matched Actuator sizes Transformer type Single Unit Controller

Control two actuators Battery type LA26M, LA35M & LA38M Control three actuators Transformer type

Controller Control two actuators Battery type with wireless handset LA35M, LA38M Transformer type

16 Control Box / Controller ORDERING CONFIGURATION CB H/C 110/220 12/24 S W B Type 2 Control circuit (H: hall sensor control, C: over current protection control) 3 Input voltage: 12VDC, 24VDC, 110VAC, 220VAC 4 Output voltage: 12VDC, 24VDC 5 Controller function (S: synchronous controller, AS: asynchronous controller; SU: single unit controller, P: precision controller) 6 Handset (W: wired handset, WL: wireless handset, B: with battery) 7 Battery MODEL OVERVIEW Controller Type No. of Actuator to control Power Type Matched Actuator sizes Transformer type Single Unit Controller Control one actuator LA26M, LA35M & LA38M Battery type Transformer type Asynchronous Controller Control two actuators Battery type LA26M, LA35M & LA38M Control three actuators Transformer type LA26M, LA35M, LA38M, LA45M, LA52M Battery type with wired handset LA35M, LA38M Synchronous Controller Control two actuators Battery type with wireless handset LA35M, LA38M Transformer type with wired handset LA35M, LA38M Transformer type with wireless handset LA35M, LA38M Precision Controller Control one actuator Transformer type LA35M, LA38M Motion Control Products Ltd. P a g e 15 Tel.: (+44)

17 CONTROLLER MODEL SPECIFICATIONS Single Unit Controller (Transformer type) Type: AC controller Model: CB-C-110/220-SU-W/WL Controller function: 1. Control one piece actuator working independently 2. Control the actuator raising and lowering and there s indicator light shows the power on and off 3. Suitable for LA26M, LA35M and LA38M actuators Protection function: The controller has over current protection function. It will protect the actuator with no damage when there s a short and the actuator will automatic recover after short circuit faults remove. Dimensions Parameters Input Voltage: V Output power: 60 (W) Output voltage: 12/24 (V) Frequency: 60HZ Output ripple noise: 280 mv p-p Output voltage accuracy: 95 (%) Voltage regulation: ± 5 (%) Load regulation: ± 5 (%) Work efficiency: 85 (%) Control accuracy: - Use frequency: 10% Number of actuator controlled: 1pc Ambient Temp: 5~40 C IP grade: IP54 Material: Anti-flaming ABS Actuator output connector: Big DIN4P Controller-input power-connector: 8 suffix power cable Remote handset frequency: 433MH (choose) Remote-control distance: 10m (choose) DIN6P Handset connector: Big DIN6P (choose) Handset wire length: 1.5m (choose) Motion Control Products Ltd. P a g e 16

18 CONTROLLER Single Unit Controller (Battery type) Type: Controller with battery Model: CB-C-12/24-12/24-SU-W/WL-B Controller function: 1. Control one piece actuator work independently 2. Control the actuator raising and lowering and there s indicator light shows the power on and off 3. Backup battery is built-in to supply the power 4. Battery capacity display function is available (choose) 5. Suitable for LA26M, LA35M and LA38M actuators Protection function: The controller has over current protection function. It will protect the actuator with no damage when there s a short and the actuator will automatic recover after short circuit faults remove. Dimensions Parameters Input Voltage: 12-24V Battery capacity: 2200mAH Output voltage: 12/24 (V) Frequency: - Output ripple noise: - Output voltage accuracy: 95 (%) Voltage regulation: ± 5 (%) Load regulation: ± 5 (%) Work efficiency: 85 (%) Control accuracy: - Use frequency: 10% Number of actuator controlled: 1pcs Ambient Temp: 5~40 C IP grade: IP54 Material: Anti-flaming ABS Actuator output connector: Big DIN4P Controller-input power-connector: - Remote handset frequency: 433MH (choose) Remote-control distance: 10m (choose) DIN6P Handset connector: Big DIN6P (choose) Handset wire length: 1.5m (choose) Motion Control Products Ltd. P a g e 17 Tel.: (+44)

19 CONTROLLER Asynchronous Controller (Transformer type) Type: AC Asynchronous controller Model: CB-C-110/220-12/24-AS-WL Controller function: 1. Control two pieces actuators working independently 2. Control the actuator raising and lowering and there s indicator light shows the power on and off 3. Suitable for LA26M, LA35M and LA38M actuators Protection function: The controller has over current protection function. It will protect the actuator with no damage when there s a short and the actuator will automatic recover after short circuit faults remove. Dimensions Parameters Input Voltage: V Output power: 60 (W) Output voltage: 12/24 (V) Frequency: 60HZ Output ripple noise: 280 mv p-p Output voltage accuracy: 95 (%) Voltage regulation: ± 5 (%) Load regulation: ± 5 (%) Work efficiency: 85 (%) Control accuracy: - Use frequency: 10% Number of actuator controlled: 2pcs Ambient Temp: 5~40 C IP grade: IP54 Material: Anti-flaming ABS Actuator output connector: Big DIN4P Controller-input power-connector: 8 suffix power cable Remote handset frequency: 433MH (choose) Remote-control distance: 10m (choose) DIN6P Handset connector: Big DIN6P (choose) Handset wire length: 1.5m (choose) Motion Control Products Ltd. P a g e 18

20 CONTROLLER Asynchronous Controller (Battery type) Type: Controller with battery Model: CB-C-12/24-12/24-AS-WL-B Controller function: 1. Control two pcs actuators work independently 2. Control the actuator raising and lowering and there s indicator light shows the power on and off 3. Backup battery is built-in to supply the power 4. Battery capacity display function is available (choose) 5. Suitable for LA26M, LA35M and LA38M actuators Protection function: The controller has over current protection function. It will protect the actuator with no damage when there s a short and the actuator will automatic recover after short circuit faults remove. Dimensions Parameters Input Voltage: 12-24V Battery capacity: 2200mAH Output voltage: 12/24 (V) Frequency: - Output ripple noise: 280mVp-p Output voltage accuracy: 95 (%) Voltage regulation: ± 5 (%) Load regulation: ± 5 (%) Work efficiency: 85 (%) Control accuracy: - Use frequency: 10% Number of actuator controlled: 2pcs Ambient Temp: 5~40 C IP grade: IP54 Material: Anti-flaming ABS Actuator output connector: Big DIN4P Controller-input power-connector: 8 suffix power cable Remote handset frequency: 433MH (choose) Remote-control distance: 10m (choose) DIN6P Handset connector: Big DIN6P (choose) Handset wire length: 1.5m (choose) Motion Control Products Ltd. P a g e 19 Tel.: (+44)

21 CONTROLLER Asynchronous Controller (Transformer type) Type: AC Asynchronous controller Model: CB-C-110/220-12/24-AS-WL Controller function: 1. Control three pieces actuators work independently 2. Control the actuator raising and lowering and there s indicator light shows the power on and off 3. Suitable for LA26M, LA35M, LA38M, LA45M and LA52M actuators Protection function: The controller has over current protection function. It will protect the actuator with no damage when there s a short and the actuator will automatic recover after short circuit faults remove. Dimensions Parameters Input Voltage: V Output power: 250 (W) Output voltage: 12/24 (V) Frequency: 60HZ Output ripple noise: 280mVp-p Output voltage accuracy: 95 (%) Voltage regulation: ± 5 (%) Load regulation: ± 5 (%) Work efficiency: 85 (%) Control accuracy: - Use frequency: 10% Number of actuator controlled: 3pcs Ambient Temp: 5~40 C IP grade: IP54 Material: Anti-flaming ABS Actuator output connector: Big DIN4P Controller-input power-connector: 8 suffix power cable Remote handset frequency: 433MH Remote-control distance: 10m Motion Control Products Ltd. P a g e 20

22 CONTROLLER Synchronous Controller (Battery type with wired handset) Type: Synchronous controller with battery & wired handset Model: CB-H-12/24-12/24-S-W-B Controller function: 1. Control two pcs actuators work synchronously 2. Control the actuator raising and lowering and there s indicator light shows the power on and off 3. Backup battery is built-in to supply the power 4. Battery capacity display function is available 5. Suitable for LA35M and LA38M actuators Protection function: The controller has over current protection function. It will protect the actuator with no damage when there s a short and the actuator will automatic recover after short circuit faults remove. Dimensions Parameters Input Voltage: 12-24V Battery capacity: 2200mAH Output voltage: 12/24 (V) Frequency: - Output ripple noise: - Output voltage accuracy: 95 (%) Voltage regulation: ± 5 (%) Load regulation: ± 5 (%) Work efficiency: 85 (%) Control accuracy: ± 1% Use frequency: 10% Number of actuator controlled: 2pcs Ambient Temp: 5~40 C IP grade: IP54 Material: Anti-flaming ABS Actuator output connector: Big DIN6P Controller-input power-connector: - DIN6P Handset connector: Big DIN6P Handset wire length: 1.5m Motion Control Products Ltd. P a g e 21 Tel.: (+44)

23 CONTROLLER Synchronous Controller (Battery type with wireless handset) Type: Synchronous controller with battery & wireless handset Model: CB-H-12/24-12/24-S-WL-B Controller function: 1. Control two pcs actuators work synchronously 2. Control the actuator raising and lowering and there s indicator light shows the power on and off 3. Backup battery is built-in to supply the power 4. Battery capacity display function is available 5. Wireless handset is available to control the actuator 6. Suitable for LA26M, LA35M and LA38M actuators Protection function: The controller has over current protection function. It will protect the actuator with no damage when there s a short and the actuator will automatic recover after short circuit faults remove. Dimensions Parameters Input Voltage: 12-24V Output power: 120 (W) Output voltage: 12/24 (V) Frequency: - Output ripple noise: 280mVp-p Output voltage accuracy: 95 (%) Voltage regulation: ± 5 (%) Load regulation: ± 5 (%) Work efficiency: 85 (%) Control accuracy: ± 1% Use frequency: 10% Number of actuator controlled: 2pcs Ambient Temp: 5~40 C IP grade: IP54 Material: Anti-flaming ABS Actuator output connector: Big DIN6P Controller-input power-connector: 8 suffix power cable DIN6P Handset connector: Big DIN6P Handset wire length: 1.5m Motion Control Products Ltd. P a g e 22

24 CONTROLLER Synchronous Controller (Transformer type with wired handset) Type: AC Synchronous controller with wired handset Model: H-110/220-12/24-S-W Controller function: 1. Control two pcs actuators work synchronously 2. Control the actuator raising and lowering and there s indicator light shows the power on and off 3. Suitable for LA35M and LA38M actuators Protection function: The controller has over current protection function. It will protect the actuator with no damage when there s a short and the actuator will automatic recover after short circuit faults remove. Dimensions Parameters Input Voltage: V Output power: 120 (W) Output voltage: 12/24 (V) Frequency: 60HZ Output ripple noise: 280mVp-p Output voltage accuracy: 95 (%) Voltage regulation: ± 5 (%) Load regulation: ± 5 (%) Work efficiency: 85 (%) Control accuracy: ± 1% Use frequency: 10% Number of actuator controlled: 2pcs Ambient Temp: 5~40 C IP grade: IP54 Material: Anti-flaming ABS Actuator output connector: Big DIN6P Controller-input power-connector: 8 suffix power cable DIN6P Handset connector: Big DIN6P Handset wire length: 1.5m Motion Control Products Ltd. P a g e 23 Tel.: (+44)

25 CONTROLLER Synchronous Controller (Transformer type with wireless handset) Type: AC Synchronous controller with wireless handset Model: CB-H-110/220-12/24-S-WL Controller function: 1. Control two pcs actuators work synchronously 2. Control the actuator raising and lowering and there s indicator light shows the power on and off 3. Wireless handset is available to control the actuator 4. Suitable for LA35M and LA38M actuators Protection function: The controller has over current protection function. It will protect the actuator with no damage when there s a short and the actuator will automatic recover after short circuit faults remove. Dimensions Parameters Input Voltage: V Output power: 120 (W) Output voltage: 12/24 (V) Frequency: 60HZ Output ripple noise: 280mVp-p Output voltage accuracy: 95 (%) Voltage regulation: ± 5 (%) Load regulation: ± 5 (%) Work efficiency: 85 (%) Control accuracy: ± 1% Use frequency: 10% Number of actuator controlled: 2pcs Ambient Temp: 5~40 C IP grade: IP54 Material: Anti-flaming ABS Actuator output connector: Big DIN6P Controller-input power-connector: 8 suffix power cable Remote handset frequency: 433MH Remote-control distance: 10m Motion Control Products Ltd. P a g e 24

26 CONTROLLER Precision Controller Type: Precision controller Model: CB-H-01/02-P-W Controller function: 1. Control the actuator raising and lowering and there s indicator light shows the power on and off 2. Preset the upper and lower limit position of the actuator and the precision is 1% of the actuator stroke. The actuator can only work within the pre-set range. 3. Suitable for LA35M and LA38M actuators Protection function: The controller has over current protection function. It will protect the actuator with no damage when there s a short and the actuator will automatic recover after short circuit faults remove. Dimensions Parameters Input Voltage: V Output power: 250 (W) Output voltage: 12/24 (V) Frequency: 60HZ Output ripple noise: 280mVp-p Output voltage accuracy: 95 (%) Voltage regulation: ± 5 (%) Load regulation: ± 5 (%) Work efficiency: 85 (%) Control accuracy: - Use frequency: 10% Number of actuator controlled: 3pcs Ambient Temp: 5~40 C IP grade: IP54 Material: Anti-flaming ABS Actuator output connector: Big DIN4P Controller-input power-connector: 8 suffix power cable Remote handset frequency: 433MH Remote-control distance: 10m Motion Control Products Ltd. P a g e 25 Tel.: (+44)

function Mounting Bracket Front Binding Head Motion

27 Accessories Connector 4-pin connector for over-current protection 6-pin connector for Hall function Mounting Bracket Front Binding Head Motion Control Products Ltd. P a g e 26

28 Doc. Ref.:V Actuator Part Number Configuration LA 35 M S B B H Series name Diameter: 26= Φ26mm; 35= Φ35mm; 38= Φ38mm; 45= Φ45mm; 52= Φ52mm Body Material: S= Powder coated 45# steel (Only available on LA35M & LA45M) AL=Aluminium (not available on LA45M) S/S=Stainless steel (Only available on LA35M) Type of the inner motor: B= PMDC brushed motor Input voltage: 12= 12VDC; 24=24VDC Load capacity (N) Load speed (mm/s) Stroke (mm) Colour: B=Black; S= Silver; C= customised Added Function: C= Over-loaded current protection circuit H=hall sensor LS= Limit Switch (available on LA38M & LA52M only) N= None Exploded View Patented Design 1 Cable (black) 2 Sealed screw Aluminum 456 Powder coated steel 7 Locating piece 8 Planetary geared motor 9 Lead screw 10 Expansion tube 11 Front binding head Copyright 2015 Motion Control Products Ltd. All rights reserved. All data subject to change without notice in advance Motion Control Products Ltd. P a g e 27 Tel.: (+44)

LA Series In-line Linear Actuators

LA Series In-line Linear Actuators Innovative, patented design for better life High quality, CE marked 6 size in diameter available: 16mm, 26mm, 35mm, 38mm, 45mm, 52mm High load capacity with precision