About JW-100SP Version 5.22

Transcription

1 About JW-100SP Version 5.22 No.1/16 This document describes additional function (for Ver.5.10) and precautions about the software version 5.22 of ladder logic programming software JW-100SP. Please read this document together with the JW-100SP Instruction Manual (Revised Version 3.1 produced in September 2001). Supported Page on this Version document Additional function Other function [1] The following functions are added to the sampling trace. (1) [Symbol/Comment Display] is added. (2) [Waveform Displayed as Relay Data] is added to the sampling data of register [ [2] A file memory can separately be transferred to PC. [3] Parameter setting property sheets for JW-10CM/JW-50FL are added. [4] [Setup/Reset, Search-Forward/Backward, All Reset] is added to the address mark. [5] Deletion of unconfirmed address symbol [6] [Delete Find Process History] is added to the [Edit] menu. * 1 [7] Data list display is changed. [8] Serial number input during setup procedures is added. [9] Timer/counter 1024 points (for JW50H/70H/100H) are supported. [10] JW-50CUH (expansion relay) and JW-70CUH (expansion relay) are included in the selection of model. [11] [Ethernet, Serial Interface] is added to the optional parameter tool. [12] Shortcut Key is added. [13] [File Management * 1 ], [Ethernet Parameter] and [Serial Interface Parameter] are added to the files related to JW-100SP. * 1 Supported on version 5.1A and after Functional Comparison Table between version 5.22 and the previous versions Ver A A No. 2/16 No. 4/16 No. 5/16 No. 6/16 No. 7/16 No. 8/16 No. 9/16 No. 13/16 No. 14/16 Supported on these versions and after Function Previous version Version Version 5.22 [Symbol/Comment Display], [Waveform Displayed as Relay Data] added to the sampling trace Model JW-50CUH (expansion relay), JW-70CUH (expansion relay) Timer/counter 1024 points (JW50H/70H/100H) File memory transferred to PC (separately) Parameter setting property sheets for JW-10CM/JW-50FL Address mark [Setup/Reset, Search-Forward/Backward, All Reset] Deletion of unconfirmed address symbol Delete Find Process History ([Edit] menu) Additional Precautions Ver.5.1A and after ( : unmatchable, : matchable) Be sure to note the following additional precautions before you use JW-100SP. Page on this document [1] Handling of program files No.15/16 [2] Program editing during monitoring [3] Symbol/comments can not be edited on the data memory window. No.16/16 [4] Correction and storage of structured program are not supported. * 2 [5] Limitation on the ladder program editing screen * 2 * 2 Applicable to previous versions

2 No.2/16 [1] Functions added to the sampling trace -> See page 8-15, 8-19, (1) [Symbol/Comment Display] is added [Symbol/Comment Display] is added in the sampling trace that starts by clicking on [Monitor] [Sampling Trace]. (No input. Display only.) (Display example) SYMBOL column COMMENT column In addition to this [Symbol/Comment] function, [Open Symbol/Comment File] is added to the [File] menu, and [Symbol Display] and [Comment Display] are added to the [Display] menu. [File] menu Added The [Open Symbol/Comment File] function is enabled only when the sampling trace starts up by itself. This function is disabled when the sampling trace starts up on JW-100SP. [Display] menu Added

3 No.3/16 (2) [Waveform Displayed as Relay Data] is added to the sampling data of register [ ] [Waveform Displayed as Relay Data] is added to the sampling data of the register [ ] at the address column of the sampling trace. (Display and operation example) Click on next to the register [ ]. A register data (displayed as a numerical value) is indicated as a relay data (displayed as a waveform). The above screen returns by clicking on

4 No.4/16 [2] A file memory can separately be transferred to PC -> See page [Data Memory] and [File Memory] can be separately selected and transferred to PC that is provided with file memory. [File Memory] can be picked per file number. To pick [File Memory], put a check mark in the file memory box (subject to transfer) and the file number box to be transferred on the [PC Transfer] dialog box. [PC Transfer] dialog box (reading) for PC Model: JW-33CUH3 File memory File number

5 No.5/16 [3] Parameter setting property sheets for JW-10CM/JW-50FL are added -> See page 7-1. If your PC model is [JW50H/70H/100H] or [JW50/70/100], property sheets for setting the following parameters are added on the system memory window (tree view). JW50H/70H/100H.. JW-10CM parameter, JW-50FL parameter JW50/70/100.. JW-10CM parameter (In case of JW50H/70H/100H) (This dialog box will appear when JW- 50FL parameter is clicked) Added

6 No.6/16 [4] Address Mark [Setup/Reset, Search-Forward/Backward, All Reset] is added -> See page Address Mark Setup/Reset, Search-Forward/Backward, All Reset] is added to the tool bar and the [Edit] menu on the [Program Ladder] window and the [Program/Mnemonic] window. Further, [Jump]-[Go to Address Mark] on the [Edit] menu is upgraded in function. Tool bar (for Ladder window) Edit menu (for Ladder window) Additional function Upgraded function Setup/Reset Search-Forward Search-Backward All Reset Jump You can set or reset address mark from the edit menu or tool bar as well as by double-click. You can search for address mark in forward or backward direction, just the same way as search function. (File 8 9 can also be searched.) All address marks are reset. You can jump to the address mark for file 9 from file 8. Toolbar Menu

7 No.7/16 [5] Deletion of unconfirmed address symbol -> See page Unconfirmed address symbol can be deleted from the [Assign Symbol] dialog box. Operation procedures 1. Pick a symbol you want to delete (click) 2. Click on [Edit]-[Delete] on the menu bar > A message of delete confirmation appears. Click on the [OK] button to delete the symbol.

8 No.8/10 [6] The [Delete Find Process History] function is added on the [Edit] menu -> See page 5-12 and 16. For Ver.5.1A and after, the [Delete Find Process History] function is added to the [Edit] menu on the Program/Ladder and Program/Mnemonic windows. Clicking on [Delete Find Process History] displays the [Delete Find Process History] dialog box. (Program/Mnemonic) Click The [Delete Find Process History] dialog box can hold up to 20 search histories (character strings), and if it holds over 20 histories, character strings will be deleted in the order the search histories are saved. Further, unnecessary history (character strings) can separately (arbitrary) be deleted. Please read the following notes (page 5-16) on the character strings of search history that are corrected as follows: (Applicable to previous versions) Notes The maximum number of character strings you can save in the search history dialog box is 20. If the number of character strings saved exceeds 20, these character strings will be deleted in the order they are saved. When you terminates JW-100SP, all histories (character strings) are deleted.

9 No.9/16 [7] Data list display is changed -> See page 5-38 through 41, 9-18 and The changes shown below are made to the [Data List] dialog box that is displayed by clicking on [Display] [Data List] on the menu bar in the [Program Ladder]/[Program/Command]. (Display example: 1-line display screen) Items Address Number of Address Used Number of Address Used (coil) Symbol Comment Ref. [1] to [10] (Cross reference) Description Relay address, register address, etc. Number of address used as a contact in the program Number of address used as a coil in the program Symbol/Comment are displayed if they are registered in an address. Program address in use (10 addresses max.) In case that a relay is used as a contact, contact A, B and coil are displayed in different color. (For details about the colors, refer to No. 11 on page 16.) The detailed display screen appears when you click on [Display] [1-line Display Selection] on the menu bar of the dialog box above. Detailed Display (Display example: Detailed display screen) Items Address Ref. [1] to [10] (Cross reference) Description Relay (register) address, number of address used, number of address used (coil), symbol, comment Program address in use (all) In case that a relay is used as a contact, contact A, B and coil are displayed in different color. (For details about the colors, refer to No. 11 on page 16.) The 1-line display screen returns if you click on [Display] [1-line Display Selection]. Detailed Display

10 No.10/16 (1) Operation -> See page 5-39, 5-40, 9-18, and 9-22 The menu operation on the [Data List] dialog box is described below. Menu bar operation [File] menu Item Print Setup Print Print Preview Printer Setup Close Content Allows you to set up the print page of data list. When you click on [Print Setup], The [Print Setup] dialog box appears. -> See No.12 on page 16. Allows you to print data list. Allows you to show how the data list look like when it is printed. Allows you to set up printer selection/connection. When you click on [Printer Setup], the [Printer Setup] dialog box appears. Allows you to close the [Data List] dialog box. [Display] menu Item Re-display 1-line Display <-> Detailed Display Selection Symbol Column Comment Column Tool Bar Status Bar Content Allows you to reflect the latest program information in the contents of data list. Allows you to switch [1-line Display] to [Detailed Display] or vice versa on the [Data List] dialog box. Allows you to make the symbol column visible or invisible. Allows you to make the comment column visible or invisible. Allows you to make the tool bar visible or invisible. Allows you to make the status bar visible or invisible. [Help] menu Item Content Data List Version Information Allows you to show the version of a data list.

11 No.11/16 Tool bar operation Same as [Re-display] on the [Display] menu Same as [1-line Display Detailed Display Selection] on the [Display] menu Same as [Data List Version Information] on the [File] menu Same as [Print Preview] on the [File] menu Same as [Print] on the [File] menu If relay address is displayed, it only indicates colors that distinguish the contents of the contacts (Contact A/Contact B/Coil) on the Ref row. (These are not buttons but only display colors.) This is the combo box that switches address area. You can jump to the head of an address area selected.

12 No.12/16 (2) Print setup of data list -> See page 9-1 and 9-11 If you click [Print Setup] on the [File] menu (see No.10/16.), the [Print Setup] dialog box will appear. Setup Items Print Type Title Header Footer Print of Symbol Print of Comment Margins Boot HF Editor Content Allows you to specify an address area to be printed. Allows you to choose "Attach" or "None" for printing a title. If you choose "Attach" to print a title, you need to specify a file name. Allows you to choose "Attach" or "None" for printing header on each page. If you choose "Attach" to print header, you need to specify a file name. Allows you to choose "Attach" or "None" for printing footer on each page. If you choose "Attach" to print footer, you need to specify a file name. Allows you to set up the print of symbol/comment (Print/No Print). Allows you to set up margins (Provide margins/no margins) on left side or upper side. Allows you to start up [HF Editor] that creates a title, header, and footer. You can specify a file name on the [Select File] dialog box by clicking [Reference] (see number above) at title/header/footer columns. (Same as on pages 9-3 and 9-4.) The files for title/header/footer can be created by clicking [Boot HF Editor] (see number above). -> See [9-2 HF Editor]. If you click on [OK] (see number above) after you finished the setup of each item, the setup data will be registered.

13 No.13/16 [8] Serial number input during setup procedures is added -> See page 2-1 Serial number input column is added on the dialog box that appears after you are all set for the setup program. Serial number The serial number is given on the case of the CD-ROM for JW-100SP. [9] Timer/counter 1024 points (for JW50H/70H/100H) are supported Timer counter 1024 points for the PC model: JW50H/70H/100H are supported. Cautions when the timer/counter 1024 points are set up. 1. The relay address from to is not displayed on any screen of [Data Memory, Symbol/Comment, Data List, any Multipoints Monitor]. 2. When change over from 512 points to 1024 points or vice versa, using the system memory, the following alarm message will appear. 512 points -> 1024 points [Relay 1300 to is changed to timer/counter contact 1000 to points -> 512 points Timer/counter contact 1000 to 1777 is changed to relay to Unused address for TMR/CNT000 to 777 will be displayed as [NU***] on the timer/counter (data memory) monitor, and unused address for TMR/CNT1000 to 1777 will be displayed as [TMR****]. (Example of display) Unused Used Unused [10] JW-50CUH (expansion relay) and JW-70CUH (expansion relay) are included in the selection of model -> See page 5-5. JW-50CUH (expansion relay) and JW-70CUH (expansion relay) are included in the selection of model JW50/70/100H series. Selection of series JW50/70/100H Selection of model JW-100CUH, JW-100CUH(expansion relay) JW-70CUH, JW-70CUH(expansion relay) JW-50CUH, JW-50CUH(expansion relay) Remarks

14 No.14/16 [11] [Ethernet, Serial Interface] is added to the optional parameter tool -> See page [Ethernet, Serial Interface] is added in the [New] dialog box that will appear by clicking on [File]-[New] at the menu bar on the option parameter tool window. Added [12] Shortcut Key is added -> See page The following (3 kinds) shortcut keys are added on the Version 5.1A and after. Shortcut Key [Shift] + [Space] key [Ctrl] + [E] key [Ctrl] + [R] key Function Switches [Cell Selection Line Selection] on the ladder editing screen. Sets relay (only on the monitor screen) Resets relay (only on the monitor screen) [13] Files related to JW-100SP are added -> See page 3-3. [File Management*], [Ethernet Parameter] and [Serial Interface Parameter] are added to the files related to JW-100SP. Category Extension Contents File Management Option Parameter *.prj *.eth Files that controls program, system, data, symbol, and parameter file Ethernet parameter *.lsu Serial interface parameter [File Management] is supported on Version 5.1A and after. Data compatible with JW-50SP (Yes: No: ) File Classification (See page 3 on Chapter 3.)

15 No.15/16 Additional Precautions [1] Handling of program files The following changes are made on Version so that you can see in the same way on the Ladder screen and Mnemonic screen when you opened a program file that was edited by other tools (such as JW- 50SP, etc.) Change 1 A change is made so that the same contents can be saved on [pgm file], [lad file], and [lst file] when a program file is saved. [Save without Conversion] is removed from the selection items on Version and before when a program file is saved. Extension *.pgm *.lad *.lst Contents Program Ladder screen information Mnemonic information Data compatible with other tools Yes No No Change 2 When the next program file is opened, a warning message will appear if a verification error occurs between [pgm file] and [lad file]. Program file edited and saved by other tools Program file saved by selecting [Save without Conversion] on JW-100SP Version and before. Warning 1. Editing by other tools The contents of a program (pgm file) is reflected on the mnemonic screen (lst file), but the contents previously saved on JW-100SP is displayed on the ladder screen (lad file). Therefore, switch the screen to the mnemonic screen, and press the [Conversion] button to convert from mnemonic to ladder so that the contents of a program can be reflected on the ladder screen. 2. Selecting [Save without Conversion] on JW-100SP Version and before Select any of the screens (Ladder/Mnemonic) previously saved which you want to be active, and press the [Conversion] button, since the contents displayed on the mnemonic screen and the ladder screen are different.

16 [2] Program editing during monitoring No.16/16 You can edit a program during monitoring on Version only when you use the same program on JW- 100SP as the program in a PC (programmable controller). You can not edit a program if you perform [Arrange Ladder Diagram, Before Word Wrapping, Ladder -> Mnemonic conversion] during monitoring. The reason is that some difference may occur between the program in the PC and the program on JW- 100SP, because Arrange Ladder Diagram or any other operations convert Ladder to Mnemonic. If you can not edit a program, Perform [PC Transfer Read], [PC Transfer Verification] operations. The program can be edited again. [3] Version does not allow you to edit symbol/comments on the data memory window. [4] Correction and storage of structured program are not supported. (Applicable to previous versions as well) JW-100SP can only read structured programming files recorded in a PC hard disk (HDD) or recording media, transfer a structured program in JW30H (control module) to a PC, display it on the screen, and monitor it. A structured program can be neither corrected nor saved in HDD or recording media. [5] Limitation on the ladder program editing screen (Applicable to previous versions as well) 1 network must be created within 100 rows on the Ladder program editing screen. If any of the circuits has 1 network created over 100 rows when a program read from programmable controller is converted to ladder diagram, correct it so that 1 network circuit should be within 100 rows. (A circuit with 1 network created over 100 rows will have a compiling error at the time of program check or mnemonic conversion.) [Example] network created over 100 rows Edit rows max rows max Produced in February 2003