Ver.2.0. Clicking the radio button for Diagrams II / Parts List on the menu bar displays the initial screen as shown below.

Transcription

1 Operating Instructions of Diagram II Flash version (XML II swf) Service Manual Supplement of Quick Guide Ver.2.0 Quick Guide for XML II swf Service Manual CS Division Panasonic Corporation 1. Initial Configuration 2. Diagrams II (XML II swf) Page Display 1.1. Introduction Further improvements and additional functions (memo function, drawing batch print function, etc.) in the XML II swf (for drawings) are incorporated in the XML II too. Browsers other than the Internet Explorer can also be used. If you use the system for the first time, see also the existing Quick Guide. # Key further improvements in Diagram II / Parts List #1. Addition of the memo function to drawings: You can add repair tips and know-how and other servicerelated information in drawings. #2. Addition of parts change information: Information on the addition, change, and deletion of parts has been added to the Parts List. #3. Addition of the drawing batch print function: You can print high-resolution drawings in a single batch, where previously, it was necessary to print each one individually. #4. Available in the multi browsers: Drawings can now be displayed in the Google Chrome and the Mozilla Firefox in addition to the Internet Explorer. Browsers that have been confirmed of supporting as of December 2013: Internet Explorer (Ver.8-9), Google Chrome, Mozilla Firefox Icon displayed for Diagram II Flash version The icon of Diagram II Flash version is displayed as follows in the Contents List screen of the TSN website. It is displayed with the following icon in the viewing button column Installing and setup procedure of Flash Setting Tool Installing and setup of the Flash Setting Tool is required for downloading and viewing on your PC Diagram II Flash version data from the TSN website. 1. Access the TSN Japan site and open the Related Link page. (Caution: Confirm the linking destination with your TSN Server administrator if using a regional TSN server) 2. If accessing the TSN Japan site, double-click the Flash Setting Tool icon in Viewing Tools to begin the download. 3. Download the "FlashSettingEN.zip" from the server. Clicking the radio button for Diagrams II / Parts List on the menu bar displays the initial screen as shown below. Diagrams II Menu Buttons: Opens the screens for parts search, cart display, and print layout. #3. The drawing print function has been upgraded. #1. [Memo function / View Memo] button: Press the [Memo function] button to activate the memo function. The button name will be changed to [View Memo] (for details, see the following page). #3. Drawing batch print function: Menu Bar: The following menu is aligned from the left - Page feed (< >) - Same refer number feed (< >) - Diagram display size (zoom ratio / [+] / [-] / full width / full height) - Diagram switching (ALL / Drawing / PARTS LIST) - Preview display button - Version display button (Ver) Full-screen display of drawings: Click [Drawing] to display the drawing full screen. Full-screen display of Parts List: Click [Parts List] to display the Parts List full screen. Requirements (1) Adobe Flash Player installation requirement: The latest Adobe Flash Player is required in order to view Flash data diagrams in Diagram II Flash version. If you do not have it installed, search for it on the Adobe website and install it. (2) Flash Setting Tool installation requirement: Installing and setup of the Flash Setting Tool is required for downloading and viewing Diagram II Flash version data from the TSN website. Improvement in the Documents screen # Addition of related-document link function Information on the change history (Supplement Manual, Parts Change Notice, etc.) is displayed and links to such documents have been added. Click the Order No. to display linked document(s). 4. Unzip the zip file and run the "FlashSetting.exe". 5. You can change the setting of your PC as the following screen. Click 'Enable to display the downloaded contents' and select the drive which you want. #2. Parts change information: A: Added parts C: Changed parts D: Deleted parts (In the case of deletion, the [PartsOrder] button is grayed out and does not function.) Displaying Contents/thumbnails of Diagrams: Displays an area for "contents" and "thumbnails" Drawing message display: Messages regarding the drawing displayed are shown. Click to close Click to open # Setting for local data viewing by Google Chrome In order to view the downloaded local data by Google Chrome, startup options (shortcut property) setting of the Google Chrome is necessary. (Please refer to Sec.5.4. about the setting.) Preview display: Switch to the [Diagram II / Parts List] screen to display the preview by default. Context menu: Click the right mouse button on the drawing number to display the context menu. The newly added memo function and drawing batch print function can be selected from the context menu. Context menu on the Parts List: Click the right mouse button on the Parts List to display parts information in the corresponding line in the form of the context menu provided below. Click the respective line to display the memo function, Parts Order, and Display Cart. *Adobe is a trademark of Adobe Systems Incorporated in Supplement Ver.2.0.

2 Quick Guide for XML II swf Service Manual 3. New Functions for Diagram II / Parts List: Memo Function # 3.1. Memo function 3.2. Browser setting # Setting of ActiveX in the Internet Explorer Setting for Google Chrome and Mozilla Firefox Memo Edit screen: Registered information: - User name: Registrant - Title: Phenomenon, etc. - Model No.: (automatically assigned) - Order No.: (automatically assigned) - Document ID: (automatically assigned) - Document No.: (automatically assigned) - Memo: Repair methods, know-how, etc. - Date: Date of registration (automatically assigned) - Note type: Categorization (notes, reference, etc.) - Attached file: (for reference) - WEB link In order to use the memo function in the Internet Explorer for the manual contents on the website, it is required to set the ActiveX and register a trusted site. 1. Click [Tools] in the tool bar [Internet option] [Security] 5. Click [Custom Level] to open [Security Setting]. 2. Select [Trusted sites]. 3. Open sites in [Trusted sites] by clicking [Sites]. For the browsers other than the Internet Explorer, data should be stored in the client s machine using the Shared Object functions in Flash. For this purpose, the capacity setting should be set to unlimited in the local storage setting of Flash. 1. Mouse over the illustration display part of the content and show the context menu of Flash by right-click. 2. Click [Setting] in the context menu and open [Adobe Flash Player Setting]. Memos List screen: The drawing No., title (phenomenon), and user name (registrant) of memos registered in the entire drawing are displayed. 4. Type in the URL of the TSN Japan Site and click [Add]. URL of TSN Japan Site : sonic.co.jp 3. Select [Local Storage] tab. 4. Set the information capacity to [Unlimited] by shifting the slide lever to the right. <Note> Separate settings are required for each location where the contents are stored (Website, Local machine). Precautions and a limit in functions 6. [ActiveX Controls and Plug-ins] items Set [Prompt] or [Enable] in [Initialize and script ActiveX controls not marked as safe for scripting] Precautions - Deletion of files by the environment management tool (Cleaner etc.) can delete the memo files. - It is required to set the capacity setting to [Unlimited] in the local storage setting of Flash as above. Deletion of the cookie may cause memos not being able to be referred nor input as the capacity setting is stored in the cookie. Memos cannot be shared with other users or among different environments (sites/pc) - Memos input by accessing the contents in the server and those input by accessing the contents locally are processed differently. Therefore, those memos input in the server cannot be browsed locally even if they are downloaded to the local machine. - Memos cannot be shared among different PCs even by the same user. - The memo information cannot be shared for other usages as it is stored in the original format. Therefore there are no functions as introduced in [3.7. Sharing memos] and [3.8. Memo function's file management] of this Supplement version. Comparison of functions with Internet Explorer Name of browsers Other user s memo browsing Attaching files Memo capacity limit in Supplement Ver Internet Explorer Unlimited Google Chrome Mozilla Firefox X Unlimited - 2 -

3 3. New Functions for Diagram II / Parts List: Memo Function # 3.3. Memo function button and menu display 3.4. Preparations for the memo function 3.5. Registration, editing, and checking of memos Quick Guide for XML II swf Service Manual [Memo function] button and the context menu by the right-click can display whether there is a [Memo] or not as well as a list of memo screen (or memo screen). [Memo function] button display: Click the [Memo function] button to activate the memo function. The button name will be switched to [View Memo]. When there are memo(s) registered in the drawing, the button name will be changed to [View Memo exist]. Activation of the memo function: This section explains the preparations necessary to use the memo function and settings for the initial screen. 1. Click the [Memo function] button to activate the memo function. This section explains how to register, edit, check, or delete memos. Registration of memos [Memo Edit]: 1. Click the right mouse button on the Ref. No. of the drawing or the line of the target part of the Parts List to show the context menu. Click [Memo] from the displayed context menu to display the [Memo Edit] screen. Drawing menu: Parts List menu: Context menu display of the drawing No.: When there are registered memo(s): Before the memo function is activated: While the memo function is activated: Mouse over the drawing No. and display the context menu by right-click. If there are memo(s) registered for the selected drawing No., the menu name will be changed to [Memo existence]. 2. Click the right mouse button on the drawing No. for which you want to register a memo and then click [Memo] from the displayed menu. Settings for initial screen [Memo setting]: [Note] Although the warning message will appear as shown on the left-hand side, click [Yes] to proceed. The button name has changed to [View Memo] and the memo function is ready to use. If there is information previously registered, the button name will change to The following [Memo setting] screen will appear when you use the memo function for the first time or no user has been registered. Set the user name and the destination folder to save (required). Click the right mouse button. No user has been registered. User has been registered. Checking memos: Delete: Delete the memo. 1. Call up the [Memo] screen from the context menu or by clicking the [Memo exist] button. 2. Write (edit) a memo in the [Memo Edit] screen. Title: Enter the problem phenomenon and its details. Memo: Enter repair methods and know-how. Note type: Select a note type from the pull-down menu. Attached file: Click the [Browse] button to select and register the file to attach. Change the file name in the [Memo setting] screen and save the file in the designated destination folder. Link URL: Register the URL of a reference website and establish a link to it. User name (required): Use only single-byte alphanumeric characters _, and.). Destination folder to save memos: (required) Default setting is available (Only for the Internet Explorer) Folders are automatically generated. Changing the destination folder to save memos, registered memos and attached files will be copied to the newly set folder. * Only information registered under the displayed user name will be copied and information registered under other user names will not be moved. in Supplement Ver Reset: (Only for the Internet Explorer) The destination folder to save memos set by a user returns to the default setting (C:\PanaXML\MyNote). Memos registered and attached files added under the displayed user name are copied to C:\PanaXML\MyNote Click the [View Memo exist] button to display a list of memos registered in all pages of the displayed drawing. Click the respective line of memos in the list to display the [Memo] screen. Links to file(s) attached to or website(s) registered in the memo [OK]: To close the [Memo] screen [Edit]: To be forwarded to the [Memo Edit] screen [Set]: To be forwarded to the [Memo Setting] screen

4 Quick Guide for XML II swf Service Manual 3. New Functions for Diagram II / Parts List: Memo Function # 4. Search function for Diagram II / Parts List 3.6. Sharing memos (Only for the Internet Explorer) You can save and share more than one user memo in the same destination folder. 1. To save memos in the same destination folder as a different user, select the user name from the pull-down menu of the [User name] column or select [Add newly] to add and register a new user Memo function's file management (Only for the Internet Explorer) This section gives details of the destination folder used to save memos and file management. Destination folders used to save memos and stored data: The [PanaXML] and [MyNote] folders will be automatically generated on Drive C as the default destination folders in which to save memos Right mouse button's context menu In the Diagram II Flash version, the following functions have been added to the right mouse button's context menu. -Search by Ref. No. -Printing of display range -Printing of entire range -Printing all drawing # Click the right mouse button on the drawing to display the menu as shown in the right-hand side. Enter the name of a new user. [FYI] You can also share memos with staff members of your organization by setting a common file server, etc. as the destination folder to save memos. 2. Enter the title and write a memo in the [Memo Edit] screen that will be displayed under the new user name. Folder to save memos: (Folder name: [Order No.]) When memos are registered, the [Order No.] folder will be automatically generated in the folder designated on the [Memo Setting] screen. Memo XML data and attached files will be saved in this folder. Memo data (XML): Memo data will be saved under the file name [user name+order No.xml]. Attached file: Attached file(s) will be saved under the name [User name+order No.+Block No.+Drawing No.+Name of attached file] in this folder. When the memo function is activated: If there are file(s) linked to the displayed drawing, memos will be read from the file and displayed on the screen. To be saved here 4.2. Ref. No. search (Menu for right mouse button) The Diagrams II menu has a Find Parts function, but in the Diagram II Flash version, the Ref. No. search function was added on right mouse button. 1. Click [Search by Ref. No.] using the right mouse button. 2. Enter the Ref. No. and click [OK]. Saving of memos: Memos will be saved as memo files that will be generated in the folder designated in the [Memo Setting] screen. Searched for Ref. No. will blink. Result of parts search * The memo is registered under the different user name in the [Memos List] screen as shown below. Intake of the XML data of other users' memos Other users' memo files shown below will be saved in the [Order No.] folder in the destination folder used to save memos. (Memo examples) Memo XML data userx+abc cj.xml Attached file userx+abc cj+001+c1100 memo.pdf [Note] If there are memos saved under the same user name, data will be overwritten. When sharing memos, be careful not to use the same user name. Same refer number feed: Makes a sequential search of the same reference number. Displays the same reference numbers while feeding between Schematic Diagram and Print Circuit Boards in Supplement Ver. 2.0.

5 Quick Guide for XML II swf Service Manual 5. Diagram II /Parts List Print Function 5.1. Drawing print function (context menu via right mouse button) 5.2. Expanded print function # The context menu displayed when clicking the right mouse button offers three types of drawing print functions. The [Printing all drawing] function is a new function featured in Supplement Ver Click either [Printing of display range], [Printing of entire range], and [Printing all drawing] # from the context menu. In the Diagram II Flash version, you can print drawings and Parts Lists using the [Print] button in the top left menu of the screen. Drawings with high resolution data can be printed in [A3 Format]. The layout of the print setting screen is changed in the Supplement Ver. 2.0 in order to accommodate the multi browsing. Print Target: You can choose to print both or either of the drawings and Parts Lists (refer to the [Print Preview] screen in the diagram below). Print Target: Drawing # - Drawing & Parts List: Drawings will be printed with Parts Lists in the conventional low resolution. - Only Drawing (Letter or A3 format: #): Drawings will be printed in high resolution as per the drawing data. Printing drawings in A3 format is possible. - Only Parts List: Only Parts Lists will be printed. Select the title size Covered Drawing: Parts List Font Size: You can choose groups of drawings to print using the pull-down menu, such as Schematic Diagram, Printed Circuit Board, Exploded View, etc. The scroll bar is enabled for preview. 2. When the printing dialog box opens, select the desired printer, paper size, etc. and print the drawing. You can enlarge the font size of the Parts List by 20% of the existing [Standard] by selecting [Large]. Print image by the [Printing of display range] function Print Preview screen: Parts List Number of Printing Lines: The number of lines to be printed for the Parts List can be altered (the default has 62 lines). Check with print previews and alter the number of lines if the lower margin of the sheet requires it. - If the margin is too big: increase the number of lines. - If the margin is too small: decrease the number of lines. Print image: Print size: A3 Select the range of printing. All or selected pages [Note] When printing drawings in A3 format: # After selecting the printer, set the paper size to A3 using printer properties. Print image by the [Printing of entire range] function Print Target: Drawing & Parts List Check the layout using the [Print Preview] screen and print the drawing. Print size: Letter Drawing area Print image by the [Printing all drawing] function # Print Target: Only Parts List Same font size in the title #: This mark shows new/added functions featured in Supplement Ver Parts List area # Setting when printing by Google Chrome When printing by the Google Chrome, plug-ins setting and startup options (shortcut property) setting of the Google Chrome are necessary. Please refer to next page about the setting

6 5. Diagram II /Parts List Print Function 5.3. Print setting for Google Chrome (required setting when printing drawings only.) # Printing drawings when the Google Chrome is used. - If the Flash Player originally contained in the Google Chrome is used, the printing data go through the Google Chrome print preview and are rasterized which results in low quality. - When printing in the Google Chrome, it is necessary to install the Flash Player separately and change it by the plug-ins setting of the Google Chrome. When using the originally contained Flash Player, the printing data are rasterized due to the preview function of the Chrome. Flash Player Plug-ins Setting of Google Chrome: 1. Startup the Google Chrome and type in [about:plugins] in the address bar. 2. A list of plug-ins is displayed. Click on the [Details] buttons on the top right Local contents browsing and printing # Quick Guide for XML II swf Service Manual Browsing and printing when the Google Chrome is used. (required setting when browsing the contents stored locally) - There is a limited access to local files in the Google Chrome. - It is necessary to make a file access available in the Google Chrome startup options when browsing the contents stored locally. Make the local contents access possible: Make the local file access possible in the Google Chrome startup options. 1. Make a shortcut copy of the existing Chrome. Installation of Flash Player: Download from the Adobe Flash Player download website. 1. Access the Adobe Flash Player download website Click the [install now] button. ---\Chrome\ Details of each plug-in are displayed. Among 2 Flash Players, disable only the one in the Chrome folder by [Disable]. 2. Display the property of the copied shortcut by right-click and add [ --allow-file-access-from-files] in the link. Notice: Input one space before the double hyphens. Your system: Windows----,English,Chrome 3. Click downloaded file [install_flashplayer11x exe]. <Contents printing screen after setting> 4. Flash player originally contained in the Google Chrome is disabled and displayed in grey. * Flash player in the Chrome folder is the originally contained one. Flash player in the windows system folder is the newly installed one. When the setting is complete, the printing data no longer go through the Google Chrome printing preview. Printer selection dialog is directly displayed which makes a high quality printing possible. 3. Drop the [index.html] from the contents folder into the Chrome started up from the copied shortcut. Select Printer - It is possible that the content of the Adobe website changes - It is possible that the name of the downloaded file may be changed depending on the versions. - The plug-ins name or installed folders may be changed due to the difference in versions #: This mark shows new/added functions featured in Supplement Ver. 2.0.