- PDF Free Download

Size: px

Start display at page:

Download ""

Darren Leonard
6 years ago
Views:

1 Distributed by The content and copyrights of the attached material are the property of its owner.

2 1x1x8mm.xx8mm.xx10mm.2x2xmm.2x2x10mm.xxmm.xxmm.xx10mm.3x3x10m m.40x40xmm.40x40x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0 x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x8mm.xx8 mm.xx10mm.2x2xmm.2x2x10mm.xxmm.xxmm.xx10mm.3x3x10mm.40x40xmm.40x40 x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x8mm.xx8mm.xx10mm.2x 2xmm.2x2x10mm.xxmm.xxmm.xx10mm.3x3x10mm.40x40xmm.40x40x10mm.40x40xmm. 4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x 2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x8mm.xx8mm.xx10mm.2x2xmm.2x2x10m m.xxmm.xxmm.xx10mm.3x3x10mm.40x40xmm.40x40x10mm.40x40xmm.4x4x10mm.0x0 x10mm.2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x8mm.xx8mm.xx10mm.2x2xmm.2x2x10mm.xxmm.x3 0xmm.xx10mm.3x3x10mm.40x40xmm.40x40x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2x10mm xx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0 x0x38mm.1x1x8mm.xx8mm.xx10mm.2x2xmm.2x2x10mm.xxmm.xxmm.xx10m m.3x3x10mm.40x40xmm.40x40x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0 x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x 8mm.xx8mm.xx10mm.2x2xmm.2x2x10mm.xxmm.xxmm.xx10mm.3x3x10mm.40x4 0xmm.40x40x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x8mm.xx8mm.x x10mm.2x2xmm.2x2x10mm.xxmm.xxmm.xx10mm.3x3x10mm.40x40xmm.40x40x10mm. 40x40xmm.4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x 2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x8mm.xx8mm.xx10mm.2x2xm m.2x2x10mm.xxmm.xxmm.xx10mm.3x3x10mm.40x40xmm.40x40x10mm.40x40xmm.4x4 x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x8mm.xx8mm.xx10mm.2x2xmm.2x2x10mm.x3 0xmm.xxmm.xx10mm.3x3x10mm.40x40xmm.40x40x10mm.40x40xmm.4x4x10mm.0x0x10mm. 2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x 0x2mm.0x0x38mm.1x1x8mm.xx8mm.xx10mm.2x2xmm.2x2x10mm.xxmm.xxmm. xx10mm.3x3x10mm.40x40xmm.40x40x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2x10mmxx1 0mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38 mm.1x1x8mm.xx8mm.xx10mm.2x2xmm.2x2x10mm.xxmm.xxmm.xx10mm.3x3x 10mm.40x40xmm.40x40x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm. 0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x8mm.x x8mm.xx10mm.2x2xmm.2x2x10mm.xxmm.xxmm.xx10mm.3x3x10mm.40x40xmm.4 0x40x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0x2 0mm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x8mm.xx8mm.xx10m m.2x2xmm.2x2x10mm.xxmm.xxmm.xx10mm.3x3x10mm.40x40xmm.40x40x10mm.40x40x mm.4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm. 80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x8mm.xx8mm.xx10mm.2x2xmm.2x2 x10mm.xxmm.xxmm.xx10mm.3x3x10mm.40x40xmm.40x40x10mm.40x40xmm.4x4x10mm. 0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x 2mm.0x0x2mm.0x0x38mm.1x1x8mm.xx8mm.xx10mm.2x2xmm.2x2x10mm.xxm m.xxmm.xx10mm.3x3x10mm.40x40xmm.40x40x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2 x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2 mm.0x0x38mm.1x1x8mm.xx8mm.xx10mm.2x2xmm.2x2x10mm.xxmm.xxmm.x3 0x10mm.3x3x10mm.40x40xmm.40x40x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1 x1x8mm.xx8mm.xx10mm.2x2xmm.2x2x10mm.xxmm.xxmm.xx10mm.3x3x10m m.40x40xmm.40x40x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0 x1mm.0x0xmm.0x0x2mm.80x80x2mm.2x2x2mm.0x0x2mm.0x0x38mm.1x1x8mm.xx8 mm.xx10mm.2x2xmm.2x2x10mm.xxmm.xxmm.xx10mm.3x3x10mm.40x40xmm.40x40 x10mm.40x40xmm.4x4x10mm.0x0x10mm.2x2x10mmxx10mm.0x0x10mm.0x0x1mm.0x0xmm KDE SERIES SUNON SUNON

3 Context page Magnetic System Design... 3rd Wire Fan Information... Model Number... 1x1x8mm,xx8mm... xx10mm,2x2xmm,2x2x10mm,2x2x1mm... xx10mm,xxmm,xx10mm,xx1mm... 3x3xmm,3x3x10mm,40x40xmm,40x40x8mm... 40x40x10mm,40x40xmm,4x4x10mm... 0x0x10mm,0x0x1mm,2x2x1mm,xx10mm x0x10mm,0x0x1mm,0x0xmm,0x0x2mm... 80x80x2mm,2x2x2mm,0x0x2mm,0x0x38mm Safety & Certification 1 00//1

4 Magnetic System Design Comparison of Magnetic system design with traditional fans Traditional Motor Design(Sleeve) Motor with Magnetic System Design(APO) Direction of Gravity magnet P.C.B the gap is caused by the combination of gravity & friction. Direction of Gravity magnet P.C.B magnetic plate fan with vertical mounting fan with horizontal mounting (impeller face-down) fan with vertical mounting fan with horizontal mounting (impeller face-down) For any traditional design fan, the shaft is carrying the weight of the rotor, therefore, the impeller tends to wobble during rotation. When the fan in operating, in particular, with vertical mounting or with impeller facing down, the wear of bearing, vibration and noise become more severe.( as shown above). Thus for fan with traditional oil-impregnated sleeve bearing, it is not practical to change the orientation as this would make the wear of bearing and vibration worse. Furthermore, the variation of noise level is large for different mounting angle. For traditional sleeve design, because of the weight on shaft, not only the impeller is prevented from circular motion with fixed center, but also tends to vibrate after long period wearing out of sleeve bearing and cause different degrees of noise level. In the traditional fan design, the impeller is secured in place by the lock washer. The rotational center point of the shaft is quite often altered by gravity effect. Accordingly, the impeller can not rotate with fixed center. In addition to the lock washer, oil ring and other spacing washers are used in the bearing system. All these loose hardwares will increase the wear and result in higher noise and shorter operating life. The unique Magnetic System Design developed by Sunon working with the magnetic field created by the built-in magnet of the impeller generates a magnetic force that attracts the impeller uniformly in 30 degree circle towards the bearing when rotating. Therefore, Sunon fan with patented magnetic system design has the following design advantages With the existence of the magnetic force, the impeller rotates evenly in fixed orbit with orbit center point. Consequently, the vibration of the impeller is significantly reduced as well as the wear of bearing. As a result, the operating life of fan is extended. In addition, the elimination in the use of some assembly hardwares such as oil ring and washer, reduces friction and therefore the wear where the components contact with the bearing. Accordingly, life of the bearing is increased and the noise level is also reduced significantly. Since the impeller is rotating at fixed orbit and fixed center point and the weight of the impeller is entirely neutralized by the magnetic plate, the shaft is able to rotate with fixed center. Thue impeller will not vibrate when rotating in any mounting angle. The fan noise level is much lower and the operating life much longer. The above-mentioned advantages, plus the magnetic system design combined with the APO bearing which is made of special treated material for wear-resist and impactresist can definitely replace the ball bearing. 2 *Specifications subject to change without notice 00//1

5 Fan Sensor Information Fan 3rd Wire Signal Fan with switching driving circuit designed for rpm measurement These fan motors have three lead wires( +Red,-Black,output signal for 3rd wireyellow) cc ce(sat) M Type TM DC FAN Run Type Red(+) Yellow Black(-) Locked Fan with driver IC R Type (Rotation Detector) Low voltage start-up 3rd wire square wave signal was amplified by a transistor (open collector type) 3rd wire square wave signal was amplified by a transistor (open collector type) Ic cc Customer's Circuit F.G. Output cc=+ max Ic=10mA max ce(sat)=0. max cc-ce(sat) Ic= 10 ma 0.~2.2 0 M Type DC FAN Run Red(+) Yellow Black(-) 3rd wire square wave signal was not amplified, only 0.~2.2 volts (), 0.~.0 volts () Locked F Type (Frequency Generator) RB Ic cc cc Customer's Circuit ce(sat) cc-ce(sat) Ic= Run F.G. Output 10 ma Locked RB=2kW( ), or 4.kW( ) Run Locked Run Locked 3 rd wire signal Run L Locked H t 1 Locked protection by cut-off run current (I R ) t 2 Auto-restart by sending starting current (I S ) cc 3 rd wire signal Run Square Wave Locked H t 3 F Type has open collector circuit designed for rpm measurement. Rpm= 0 t3xpoles cc DC FAN Red(+) Yellow Black(-) Ic DC FAN Red(+) Yellow Black(-) Ic Customer's Circuit Customer's Circuit cc cc ce(sat) Run Locked ce(sat) Run Locked 3 cc=+ max Ic=10mA max cc Ic= cc=+ max Ic=10mA max cc Ic= 00//

6 Model Numbering System KDE 08 P T S 1 8 FAN SERIES KDE DC MOTOR FAN OLTAGE 0DC DC DC FRAME SIZE 0mm 44mm 02mm 0440mm 0880mm 33mm 00mm 03mm 02mm 0mm 00mm 01mm mm 11mm FRAME SHAPE PPBT Plastic AAluminum Suffix P/N Example P/N.(2)..M.C8 A AS AR AF (2) N G M C CM TM M AXX BXX CXX Motor protection by IC (Only available for 802//02/038 Series) Motor protection by IC combined with a temperature sensor (Only available for 802//02/038 Series) Motor protection by IC with rotation detector waveform (Only available for 802//02/038 Series) Motor protection by IC with frequency generation waveform (Only available for 802//02/038 Series) MOTOR POLES 8 8 Poles Poles Blank 4 Poles SPEED XSUPER 1HIGH 2MIDDLE Magnetic system design with open collector Two ball bearing Smaller hub Big hub New blade Low voltage start-up & open collector type with 3rd wire square wave signal amplified by a transistor with 3 caps M with 3 caps No low voltage start-up with open collector type (Only available for 21/1/4010/410/010/010-8P/21/01/40/0/02-4P Series) 3rd wire square wave signal was not amplified Lead wire different Special circuit design Special frame or impller different 3LOW 4EXTRA LOW BEARING SYSTEM APO SSLEEE B FRAME THICKNESS M38mm Gmm L mm F 10mm T 2mm E mm K mm D ~8mm H 1mm C 4.8mm 4 *Specifications subject to change without notice 00//1

7 MOTOR FRAME IMPELLER BEARING INSULATION INSULATION RESISTANCE DIELECTRIC STRENGTH SAFETY PROTECTION OPERATING TEMPERATURE STORAGE TEMPERATURE OPERATING OLTAGE OPERATING POWER PROFESSIONAL DESIGN Patented Brushless DC Motor design Injection molded non-flammable black thermoplastic UL 4-0 Rating and aluminum Injection molded non-flammable black thermoplastic UL 4-0 Rating Precision, life-lubricated ball bearing system Precision, oil-impregnated sintered sleeve bearing system Class E integral ground system 100 C More than 00M ohm between internal stator and lead wire(+) measured by DC 00 00AC for one minute Electronic locked rotor protected -10 to +0 C -40 to +0 C Rated oltage +1% Rated power & current tolenrance +1% We can design to fit any special application requirement 108 1x1x8mm Model P/N Bearing Rating oltage (DC) KDE01PDB1-8 KDE01PDB2-8 KDE01PDB3-8 APO SLEEE xx8mm Model P/N Bearing (DC) KDE001PDB1-8 KDE001PDB2-8 KDE001PDB *Specifications subject to change without notice 00//1

8 *Specifications subject to change without notice 00//1 10 xx10mm KD001PF1-8 KD001PF2-8 KD001PF3-8 KD001PFB1-8 KD001PFB2-8 KD001PFB3-8 KD001PFB1-8 KD001PFB2-8 KD001PFB Model P/N Bearing (DC) Model KD002PE1-8 KD002PE2-8 KD002PEB1-8 KD002PEB2-8 KD002PEB3-8 KD002PEB1-8 KD002PEB2-8 KD002PEB1-8 KD002PEB2-8 2x2xmm.N.N.N.N P/N Bearing (DC) 210 KD002PF1-8 KD002PF2-8 KD002PF3-8 KD002PF4-8 KD002AF1-8 KD002AF2-8 KD002AF3-8 KD002PFB1-8 KD002PFB2-8 KD002PFB3-8 KD002PFB4-8 KD002PFB1-8 KD002PFB2-8 KD002PFB3-8 KD002PFB4-8 KD002AFB1-8 KD002AFB2-8 KD002AFB3-8 KD002PFB1-8 KD002PFB2-8 KD002PFB3-8 KD002AFB1-8 KD002AFB2-8 KD002AFB3-8 KD02PFB1-8 KD02PFB2-8 KD02PFB x2x10mm Model P/N Rating oltage (DC) Bearing APO SLEEE Model 2x2x1mm KD002PHB1-8 KD002PHB2-8 KD002PHB P/N Bearing (DC)

9 *Specifications subject to change without notice 00// KDE003PF1-8 KDE003PF2-8 KDE003PF3-8 KDE003PF4-8 KDE003PFB1-8 KDE003PFB2-8 KDE003PFB3-8 KDE003PFB4-8 KDE003PFB1-8 KDE003PFB2-8 KDE003PFB3-8 KDE003PFB4-8 KDE003PFB1-8 KDE003PFB2-8 KDE003PFB3-8 KDE003PAB1-8 KDE003PAB2-8 KDE003PAB3-8 KDE03PFB1-8 KDE03PFB2-8 KDE03PFB3-8 KDE03PFB1-8 KDE03PFB2-8 KDE03PFB xx10mm Model P/N Rating oltage (DC) Bearing APO SLEEE 1 Model xx1mm P/N Bearing (DC) KDE003PHB1-8 KDE003PHB2-8 KDE003PHB xx10mm KDE0AF1-8 KDE0AF2-8 KDE0AFB1-8 KDE0AFB2-8 KDE0AFB3-8 KDE0AFB1-8 KDE0AFB KDE003PE1-8 KDE003PE2-8 KDE003PEB1-8 KDE003PEB2-8 KDE003PEB3-8 KDE003PEB1-8 KDE003PEB2-8 xxmm.n.n.n.n Model P/N Bearing (DC) Model P/N Bearing (DC)

10 3x3xmm Model P/N Bearing Rating oltage (DC) KDE03PE1-8 KDE03PE2-8 KDE03PEB1-8 KDE03PEB2-8.N.N.N.N APO SLEEE x3x10mm Model P/N Bearing (DC) KDE03PF1-8 KDE03PF2-8 KDE03PF3-8 KDE03PFB KDE03PFB KDE03PFB KDE03PFB1-8 KDE03PFB2-8 KDE03PFB3-8 KDE3PF1-8 KDE3PF2-8 KDE3PF3-8 KDE3PFB KDE3PFB KDE3PFB KDE3PFB1-8 KDE3PFB2-8 KDE3PFB x40xmm Model P/N Bearing (DC) KDE004PE1-8 KDE004PE2-8 KDE004PEB1-8 KDE004PEB2-8 KDE004PEB3-8 KDE004PEB1-8 KDE004PEB x40x8mm Model KDE004PD2-8 KDE04PD2-8 P/N Bearing (DC) *Specifications subject to change without notice 00//1

11 *Specifications subject to change without notice 00// KDE04PF1 KDE04PF2 KDE04PFS1-8 KDE04PFS2-8 KDE04PFS3-8 KDE04PFB1-8 KDE04PFB2-8 KDE04PFB3-8 KDE04PFB1 KDE04PFB2 KDE04PFB3 KDE04PFB1 KDE04PFB x40x10mm Model 40x40xmm KDE004PKS2 KDE004PKS3 KDE004PKB2 KDE004PKB3 KDE04PKX KDE04PK1 KDE04PK2 KDE04PK3 KDE04PKS2 KDE04PKS3 KDE04PKB2 KDE04PKB3 KDE04PKB1 KDE04PKB2 KDE04PKB3 KDE04PKS1 KDE04PKS2 KDE04PKS3 KDE04PKB2 KDE04PKB P/N Bearing (DC) KDE4PF1 KDE4PF2 KDE4PFS1-8 KDE4PFS2-8 KDE4PFS3-8 KDE4PFB1-8 KDE4PFB2-8 KDE4PFB3-8 KDE4PFB1 KDE4PFB2 KDE4PFB3 KDE4PFB1 KDE4PFB x4x10mm Model P/N Bearing (DC) Model P/N Rating oltage (DC) Bearing APO SLEEE

12 10 *Specifications subject to change without notice 00//1 21 KDE00PHS2 KDE00PHS3 KDE00PHB2 KDE00PHB3 KDE0PHS2 KDE0PHS3 KDE0PHB2 KDE0PHB x2x1mm G.G.G.G xx10mm KDEPF1-8 KDEPF2-8 KDEPFS1-8 KDEPFS2-8 KDEPFS3-8 KDEPFB1-8 KDEPFB2-8 KDEPFB3-8 KDEPFB1-8 KDEPFB KDE0PF1 KDE0PF2 0x0x10mm.G.G Model P/N Bearing (DC) Model P/N Bearing (DC) 01 KDE0PH1 KDE0PH2 KDE0PHB1 KDE0PHB2 KDE0PHB2 (2) x0x1mm Model P/N Bearing (DC) Model P/N Rating oltage (DC) Bearing APO SLEEE KDE0PF1 KDE0PF2 KDE0PFS1-8 KDE0PFS2-8 KDE0PFS3-8 KDE0PFB1-8 KDE0PFB2-8 KDE0PFB3-8 KDE0PFB1 KDE0PFB2 KDE0PFB3 KDE0PFB1 KDE0PFB2 KDE0PFB1 KDE0PFB2.G.G

13 Model P/N Bearing (DC) Model P/N Rating oltage (DC) Bearing APO SLEEE SUNON KDE Series 11 *Specifications subject to change without notice 00//1 01 0x0x1mm KDE00PHS2 KDE00PHS3 KDE00PHB2 KDE00PHB3 KDE0PH1 KDE0PH2 KDE0PHS2 KDE0PHS3 KDE0PHB2 KDE0PHB3 KDE0PHB1 KDE0PHB Model 0x0xmm KDE0PK1 KDE0PK2 KDE0PKS1 KDE0PKS2 KDE0PKS3 KDE0PKB1 KDE0PKB2 KDE0PKB3 KDE0PKB1 KDE0PKB P/N Bearing (DC) 02 Model KDE00PTS2 KDE00PTS3 KDE0PT1 KDE0PT2 KDE0PTS1 KDE0PTS2 KDE0PTS3 KDE0PTB1 KDE0PTB2 KDE0PTB3 KDE0PTB1 KDE0PTB2 KDE0PTB1 KDE0PTB2 0x0x2mm.(2).(2) P/N Bearing (DC).G.G.G.G.G.G.G.G 010 0x0x10mm KDE0PF1 KDE0PF2 KDE0PFS2-8 KDE0PFS3-8 KDE0PFB2-8 KDE0PFB3-8 KDE0PFB1 KDE0PFB

14 802 80x80x2mm Model P/N Bearing Rating oltage (DC) KDE08PTS1- KDE08PTS2- KDE08PTS3- KDE08PTB1- KDE08PTB2- KDE08PTB3- APO SLEEE x2x2mm Model P/N Bearing (DC) KDE0PTS1- KDE0PTS2- KDE0PTS3- KDE0PTB1- KDE0PTB2- KDE0PTB x0x2mm Model P/N Bearing (DC) KDEPTS1-A KDEPTS2-A KDEPTS3-A KDEPTB1-A KDEPTB2-A KDEPTB3-A KDEPTS1-A KDEPTS2-A KDEPTS3-A KDEPTB1-A KDEPTB2-A KDEPTB3-A x0x38mm Model P/N Bearing (DC) KDEPX-A KDEP1-A KDEP2-A KDEP3-A KDEPMBX-A KDEPMB1-A KDEPMB2-A KDEPMB3-A KDEPX-A KDEP1-A KDEP2-A KDEP3-A KDEPMBX-A KDEPMB1-A KDEPMB2-A KDEPMB3-A *Specifications subject to change without notice 00//1

15 Headquarters Sunonwealth Electric Machine Industry Co., Ltd. th floor, 0 Chung Cheng 1st Road, Kaohsiung, Taiwan, R.O.C. TEL 88--(41 lines) FAX 88--8/8/88 sunon@ U http// Sunon Inc. (U.S.A.) 10-A West Lambert Road Suite A, Brea, California 21 U.S.A TEL FAX info@sunon.com U http// Sunon SAS (Europe) Parc Medicis,, Avenue Des Pepinieres 48 Fresnes Cedex-France TEL FAX info@sunon.fr U http// Sunon Corporation (Japan) Stork Minami Otsuka 4Fl.33-1, 2 Chome, Minami Otsuka Toshimaku, Tokyo Japan TEL FAX martin@ .sunon.com.tw U http// Sunon Hong Kong Office Unit Nan Fung Centre, 4 Castle Peak Road, Tsuen Wan, Hong Kong, China TEL FAX terence@sunon.com.hk Sunon Singapore Office 10 Jalan Besar, #0-0, Sim Lim Tower, Singapore 88 TEL FAX --2 sunon@mbox.singnet.com.sg 00//1

Sunon. DC Brushless Fan. Fan and Blower SUNONR

Sunon. DC Brushless Fan. Fan and Blower SUNONR Sunon DC Brushless Fan Fan and Blower SUNONR Sunon MagLev DC Brushless Fan 2x2xmm (VDC) KDE002PEV1-8 KDE002PEV2-8 KDE002PEV3-8 KDE002PEB1-8 KDE002PEB2-8 KDE002PEB3-8.N.N.N.N.N.N VAPO 2 0. 0.3 0. 0.3 000