Inkscape Tutorial: Floral Motif
|
|
- Helena Foster
- 6 years ago
- Views:
Transcription
1 Inkscape Tutorial: Floral Motif By: Very Simple Designs Web Site: I was working on the Paisley Motif tutorial and right at the last step I decided to add a floral motif to it. And there it happened again, my short and easy tutorial became a lot longer! So I decided on a spin-off again. This tutorial is short and sweet and only focusses on creating a simple decorative flower ornament that can be used in many designs, including the paisley motif. I assume little Inkscape knowledge, and the tutorial should be easy to follow for a beginning Inkscape artist. Before we start Inkscape remembers by default the last settings of a tool. Therefore objects you draw may differ from the screenshots in this tutorial. Help on how to correct the most common settings can be found on this page: Inkscape Beginner Tips (opens in a new window). Design of a Floral Motif Traditionally the paisley motif features floral designs in the centre. These designs can have many shapes from beautiful flowers, lush guirlandes to abstract motifs. A lot of the paisley motifs cut into woodblocks and then used to stencil the motif on fabric or paper. The motif we create here could have been used for that. Size of the Motif The size of the motif is really not important. I made this one for decorating a paisley motif, so in its use it will be very small. But I created it using a large part of the default document. In the end it was taking up about 25% of the paper, and then I scaled it further down to suit my design.
2 Step 1 The Leaf Let's start. Open Inkscape with the default document. Select the bezier tool with the default settings: The bezier tool is one of the most important tools in Inkscape, but most beginners find it a bit hard to master it. So lets use an eay way out - 4 simple clicks on the canvas to create an approximate triangle: Click on the canvas and move the mouse cursor to the left and a bit upwards. right. Click again to form the top left sharp corner, then move the mouse to the bottom Click to form the bottom right corner and move the cursor to the start point. Click at the start point and finish by pressing the Enter-key on the keyboard OR click with the right mouse button at the starting point. With the triangle still selected, select the Node Tool.
3 With the Node Tool, nudge the lower connecting line a bit upwards. Just hover over the line, click and drag it upwards: Repeat for the top connecting line: Select the 2 outer nodes by dragging a selection window (rubberband) around them, or select one node, hold down the Shift-key and then click on the other: Open the Align and Distribute dialog (Ctrl+Shift+A) and align the nodes vertically. Use the Select Tool. Give the shape a black fill by clicking on the black swatch in the colour palette at the bottom of the screen. Remove the stroke (outline) by holding down the Shift-key and then click on the X in the colour paletter at the bottom of the screen.
4 Step 2 Duplicate the Leaf Duplicate the shape via menu Edit > Duplicate (Shortcut: Ctrl+D). The duplicate is created exactly on top of the original. Flip the duplicate horizontally by pressing this button : Select both shapes. Open the the Align and Distribute dialog (Ctrl+Shift+A) if you closed it. Align the outer edges of the object such that you end up with below shape. The selection order determines whether "Align left edge of object to anchor right edge" or "Align right edge of object to anchor left edge" below shape. has to be used. Just try the other if you do not end up with Use Path > Union from the menu. This unions both objects into one.
5 Step 3 Duplicate and Resize the Leaves Make a duplicate again: use menu Edit > Duplicate (Ctrl+D). Remember that the duplicate is created on top of the original. Move the duplicate with the mouse or arrow keys above the initial shape. Hold down the Ctrlkey to constraint vertical movement if you use the mouse. Hold down the Shift-key and squash the duplicate shape horizontally by dragging the middle handles. The Shift-key ensures it resizes from the centre: Step 4 Duplicate the Resized Leaves Make a duplicate from the resized shape only. Menu Edit > Duplicate (Ctrl+D). Move it down such that it overlaps with the original shape. Hold down the Ctrl-key to constraint vertical movment:
6 Step 5 Union of the Leaves Select the 2 bottom objects. Use Path > Union from the menu. This creates one path from both objects: I decide to stretch the object a bit further vertically, by dragging the bottom centre handle: Select the 2 objects and combine them (Ctrl+K). This makes them into 1 path, exisisting of 2 subpaths:
7 Step 6 Duplicate and Flip Make a duplicate via menu Edit > Duplicate (Ctrl+D) and flip it vertically pressing this button : Use the mouse or the arrow keys to move the duplicate downwards. Hold down the Ctrl-key to constraint vertical movment if you use the mouse.
8
9 Step 7 Group, Duplicate, and Rotate Select both objects and group them via menu Object > Group (Ctrl+G). Make a duplicate via menu Edit > Duplicate (Ctrl+D). Rotate the duplicate group over 90 degrees by pressing this button :
10 Group the total design via menu Object > Group (Ctrl+G).
11 Note: if you completed the floral design tutorial, you'll know that creating a rotated design like this might as well be done with cloned tiles. There are many ways to create certain effects in Inkscape. I just try to show different techniques in the various tutorials. There is no right or wrong, just experiment and find the way that suits you best. Save your work. For the preview pictures I added a simple rectangle to the background, and gave that a radial fill with turquoise. That's all folks. As usual: feedback is as always highly appreciated.
Inkscape tutorial: Donate button
Inkscape tutorial: Donate button By: Very Simple Designs (BDT466) Web Site: http://verysimpledesigns.com/vectors/inkscape-tutorial-donate-button.html This Inkscape beginner tutorial teaches the viewer
More informationMicrosoft Visio Working with Shapes
Working with Visio Shapes Shape is the general term for the objects you will find on a stencil and objects created using the drawing tools. These include geometric shapes such as rectangles, triangles
More informationInkscape Interface. commands panes snap. tool. menus. controls. controls. toolbox. canvas. page. palette
Inkscape Interface menus box canvas page palette commands panes snap Toolbox Interface Inkscape Selectionmenus Edit Paths by Nodes box Rectangle Align and Distribute pane Fill and Stroke panecommands panes
More informationINKSCAPE BASICS. 125 S. Prospect Avenue, Elmhurst, IL (630) elmhurstpubliclibrary.org. Create, Make, and Build
INKSCAPE BASICS Inkscape is a free, open-source vector graphics editor. It can be used to create or edit vector graphics like illustrations, diagrams, line arts, charts, logos and more. Inkscape uses Scalable
More informationTransforming Selections In Photoshop
Transforming Selections In Photoshop Written by Steve Patterson. In previous tutorials, we learned how to draw simple shape-based selections with Photoshop s Rectangular and Elliptical Marquee Tools. Using
More informationCreate a Cool Vector Robot Character in Illustrator
Create a Cool Vector Robot Character in Illustrator In this tutorial, we will use various tools and techniques to create a simple vector robot character and learn the basic of Adobe Illustrated. With this
More informationHow to...create a Video VBOX Gauge in Inkscape. So you want to create your own gauge? How about a transparent background for those text elements?
BASIC GAUGE CREATION The Video VBox setup software is capable of using many different image formats for gauge backgrounds, static images, or logos, including Bitmaps, JPEGs, or PNG s. When the software
More informationCREATING THE FUNKY BUSINESS CARD
CREATING THE FUNKY BUSINESS CARD This is what the final product should look like. 1. Open Illustrator 2. Create a new document (file new) Name your document. Change the units to inches. Change the document
More informationSevere Weather Safety PSA
Contents Add Text 2 Format Text 3 Add Stickers 4 Resize Stickers 8 Change the Color of the Canvas 9 Name the Project 12 Add a Page 12 Practice Adding and Formatting Text 13 Use the Paint Brush Tool 14
More informationLove is a Puzzle. This monogram combines PaintWork, Stitching and CrystalWorks for a truly unique style that pops!
Love is a Puzzle Created by Sylvain Bergeron This monogram combines PaintWork, Stitching and CrystalWorks for a truly unique style that pops! It also leverages existing resources provided with your DesignWorks
More informationMET 107 Drawing Tool (Shapes) Notes Day 3
MET 107 Drawing Tool (Shapes) Notes Day 3 Shapes: (Insert Tab Shapes) Example: Select on the rounded rectangle Then use the mouse to position the upper left corner and produce the size by dragging out
More informationDrawing Tools. Drawing a Rectangle
Chapter Microsoft Word provides extensive DRAWING TOOLS that allow you to enhance the appearance of your documents. You can use these tools to assist in the creation of detailed publications, newsletters,
More informationAdobe Illustrator CS Design Professional GETTING STARTED WITH ILLUSTRATOR
Adobe Illustrator CS Design Professional GETTING STARTED WITH ILLUSTRATOR Chapter Lessons Create a new document Explore the Illustrator window Create basic shapes Apply fill and stroke colors to objects
More informationCreating Digital Illustrations for Your Research Workshop III Basic Illustration Demo
Creating Digital Illustrations for Your Research Workshop III Basic Illustration Demo Final Figure Size exclusion chromatography (SEC) is used primarily for the analysis of large molecules such as proteins
More informationInkscape Tutorial. v2.0. Simon Andrews.
Inkscape Tutorial v2.0 Simon Andrews simon.andrews@babraham.ac.uk What is Inkscape? Vector Graphics Editor Free Software Cross Platform Easy to use Good for: Compositing Drawing Not for: Bitmap editing
More informationCreative Sewing Machines Workbook based on BERNINA Embroidery Software V8
V8 Lesson 49 Using an Object for a Carving Stamp Edited for V8.1 update. We will start by using Corel to find and save an image. On your desktop there should be 4 Corel icons. I have grouped mine together
More informationILLUSTRATOR. Introduction to Adobe Illustrator. You will;
ILLUSTRATOR You will; 1. Learn Basic Navigation. 2. Learn about Paths. 3. Learn about the Line Tools. 4. Learn about the Shape Tools. 5. Learn about Strokes and Fills. 6. Learn about Transformations. 7.
More informationINKSCAPE INTRODUCTION COMPONENTS OF INKSCAPE MENU BAR
INKSCAPE Prepared by K. Srujana INTRODUCTION Inkscape began in 2003 as a code fork of the Sodipodia project. Sodipodi, developed since 1999, was itself based on Rsph Levien's Gill (Gnome Illustration Application).
More informationAwesome PowerPoint Tricks for Effective Presentations
EFFECTIVE LEARNING STARTS WITH COMPELLING CONTENT Awesome PowerPoint Tricks for Effective Presentations Instructional Design and Content Creation for Live Training and elearning info.com +1 866 789 2482
More informationCustom Shapes As Text Frames In Photoshop
Custom Shapes As Text Frames In Photoshop I used a background for this activity. Save it and open in Photoshop: Select Photoshop's Custom Shape Tool from the Tools panel. In the custom shapes options panel
More informationTITLE: GLASS GOBLET. Software: Serif DrawPlus X8. Author: Sandra Jewry. Website: Draw Plus Tutorials by San. Skill Level: Beginner.
TITLE: GLASS GOBLET Software: Serif DrawPlus X8 Author: Sandra Jewry Website: Draw Plus Tutorials by San Skill Level: Beginner Supplies: None Description: This is a very easy beginner tutorial that shows
More informationAdobe Illustrator CS5 Part 2: Vector Graphic Effects
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Adobe Illustrator CS5 Part 2: Vector Graphic Effects Summer 2011, Version 1.0 Table of Contents Introduction...2 Downloading the
More informationUser Manual Version 1.1 January 2015
User Manual Version 1.1 January 2015 - 2 / 112 - V1.1 Variegator... 7 Variegator Features... 7 1. Variable elements... 7 2. Static elements... 7 3. Element Manipulation... 7 4. Document Formats... 7 5.
More informationAdobe Animate Basics
Adobe Animate Basics What is Adobe Animate? Adobe Animate, formerly known as Adobe Flash, is a multimedia authoring and computer animation program. Animate can be used to design vector graphics and animation,
More informationWord 2013 Quick Start Guide
Getting Started File Tab: Click to access actions like Print, Save As, and Word Options. Ribbon: Logically organize actions onto Tabs, Groups, and Buttons to facilitate finding commands. Active Document
More informationRecipes4Success. Draw and Animate a Rocket Ship. Frames 5 - Drawing Tools
Recipes4Success You can use the drawing tools and path animation tools in Frames to create illustrated cartoons. In this Recipe, you will draw and animate a rocket ship. 2012. All Rights Reserved. This
More informationUsing Adobe Photoshop
Using Adobe Photoshop 2 In this section we ll look at some essential things you need to know in order to use Photoshop effectively. First of all, we ll take a look at customising Photoshop s settings and
More informationApex Sketch v7. Define First
Apex Sketch v7 Legacy Draw First Drawing Method Define First Apex Sketch Version 7 Define First Apex Sketch Version 7 uses the same keystrokes as you would use traditionally in any other Apex program.
More informationHow to draw and create shapes
Adobe Flash Professional Guide How to draw and create shapes You can add artwork to your Adobe Flash Professional documents in two ways: You can import images or draw original artwork in Flash by using
More informationLearning Microsoft Word By Greg Bowden. Chapter 10. Drawing Tools. Guided Computer Tutorials
Learning Microsoft Word 2007 By Greg Bowden Chapter 10 Drawing Tools Guided Computer Tutorials www.gct.com.au PUBLISHED BY GUIDED COMPUTER TUTORIALS PO Box 311 Belmont, Victoria, 3216, Australia www.gct.com.au
More informationPowerPoint 2007 Cheat Sheet
ellen@ellenfinkelstein.com 515-989-1832 PowerPoint 2007 Cheat Sheet Contents Templates and Themes... 2 Apply a corporate template or theme... 2 Format the slide master... 2 Work with layouts... 3 Edit
More informationSETTINGS AND WORKSPACE
ADOBE ILLUSTRATOR Adobe Illustrator is a program used to create vector illustrations / graphics (.ai/.eps/.svg). These graphics will then be used for logos, banners, infographics, flyers... in print and
More informationcreating files and saving for web
creating files and saving for web the template files assume a default image size of 300 x 300 pixels images intended for the web should be produced in rgb mode name your images in a logical format, so
More informationSIMPLE TEXT LAYOUT FOR COREL DRAW. When you start Corel Draw, you will see the following welcome screen.
SIMPLE TEXT LAYOUT FOR COREL DRAW When you start Corel Draw, you will see the following welcome screen. A. Start a new job by left clicking New Graphic. B. Place your mouse cursor over the page width box.
More informationXPEL DAP SUPPORT. DAP Tool List & Overview DESCRIPTION ICON/TOOL (SHORTCUT)
Pointer (S) Left-click on individual entities to add them to the current selection (selected entities will turn red). If the entity selected is a member of a group, the entire group will be added to the
More informationCreate a Scrapbook Page
Create a Scrapbook Page You are now going to create a scrapbook page that will contain an arrangement of pictures and text. 1. Open Photoshop start > programs > Adobe Master Collection > Photoshop CS5
More informationIGCSE ICT Section 16 Presentation Authoring
IGCSE ICT Section 16 Presentation Authoring Mr Nicholls Cairo English School P a g e 1 Contents Importing text to create slides Page 4 Manually creating slides.. Page 5 Removing blank slides. Page 5 Changing
More informationPowerPoint 2000 Tutorial
PowerPoint 2000 Tutorial Getting Started Open Power Point and you will be prompted by a dialog box with four choices. Each of these options are explained on this page. If Power Point is already open or
More informationModifier Keys. Option Key. Command Key. Shift Key. Control Key. Return Key. Tab
EYBOARD HORTCUTS Modifier Keys Option Key Command Key Shift Key Control Key Return Key Alt Key Tab Ctrl Alt 1 Editing Shortcuts Resize Document + + I Alt + Ctrl + I Resize Canvas + + C Alt + Ctrl + C Select
More informationCreating a Presentation
Creating a Presentation 1.1 Double Click the PowerPoint icon on the desktop Or Click on the start menu Type PowerPoint into the search box Click on the PowerPoint icon 1.2 Click Blank Presentation 1 How
More informationINFORMATION TECHNOLOGY
INFORMATION TECHNOLOGY PowerPoint Presentation Section Two: Formatting, Editing & Printing Section Two: Formatting, Editing & Printing By the end of this section you will be able to: Insert, Edit and Delete
More informationUsing Adobe Photoshop
Using Adobe Photoshop 2 In this section we ll look at some essential things you need to know in order to use Photoshop effectively. First of all, we ll take a look at customising Photoshop s settings and
More informationECDL Module 6 REFERENCE MANUAL
ECDL Module 6 REFERENCE MANUAL Presentation Microsoft PowerPoint XP Edition for ECDL Syllabus Four PAGE 2 - ECDL MODULE 6 (USING POWERPOINT XP) - MANUAL 6.1 GETTING STARTED... 4 6.1.1 FIRST STEPS WITH
More informationXyron Wishblade Software Manual (Mac)
Xyron Wishblade Software Manual (Mac) Provided By http://www.mybinding.com http://www.mybindingblog.com Xyron Wishblade Create & Cut Software Manual Section 1 Getting Started with Tool Bars 2 Standard
More informationWAYLAND FREE PUBLIC LIBRARY 3D Design and Printing Tutorial: Create a Keychain
WAYLAND FREE PUBLIC LIBRARY 3D Design and Printing Tutorial: Create a Keychain Welcome! In this tutorial we will be creating a 3D printed keychain. You will personalize this name tag with text to make
More informationXyron Wishblade Software Manual (PC)
Xyron Wishblade Software Manual (PC) Provided By http://www.mybinding.com http://www.mybindingblog.com Xyron Wishblade Create & Cut Software Manual Section 1 Getting Started with Tool Bars 2 Standard Tool
More informationEducation and Training CUFMEM14A. Exercise 2. Create, Manipulate and Incorporate 2D Graphics
Education and Training CUFMEM14A Exercise 2 Create, Manipulate and Incorporate 2D Graphics Menu Exercise 2 Exercise 2a: Scarecrow Exercise - Painting and Drawing Tools... 3 Exercise 2b: Scarecrow Exercise
More information3D Modeler Creating Custom myhouse Symbols
3D Modeler Creating Custom myhouse Symbols myhouse includes a large number of predrawn symbols. For most designs and floorplans, these should be sufficient. For plans that require that special table, bed,
More informationPhotoshop Fundamentals
Lesson 3 Photoshop Fundamentals Photoshop Fundamentals How to Navigate your Document Zooming in and out To zoom in and out on your Photoshop document, hold down the Command key (Ctrl on Win) and press
More informationDesign and Print Instruction Manual
Diamond Design Design and Print Instruction Manual Contents Installation 1 Installing the Diamond Design Software 2-3 Installing the ORIGINAL Argox OS-214 printer drivers 4 Installing the EXCEL Argox OS-314
More informationPhotoshop / Editing paths
Photoshop / Editing paths Path segments, components, and points Select a path Adjust path segments Add or delete anchor points Convert between smooth points and corner points Adjust path components Path
More informationCPM-200 User Guide For Lighthouse for MAX
CPM-200 User Guide For Lighthouse for MAX Contents Page Number Opening the software 2 Altering the page size & Orientation 3-4 Inserting Text 5 Editing Text 6 Inserting Graphics 7-8 Changing the Colour
More informationReal Estate Flyer. Projects 1
Projects 1 PagePlus provides a wide selection of design templates, which you can use as starting points for your own publications. In this project, we ll start with a real estate flyer template and customize
More informationView the final cute monster character
Follow this step by step Illustrator tutorial to create a cute vector monster character. Weʼll create the character from basic shapes to give a cute and friendly appearance then weʼll bring the character
More informationA Step-by-step guide to creating a Professional PowerPoint Presentation
Quick introduction to Microsoft PowerPoint A Step-by-step guide to creating a Professional PowerPoint Presentation Created by Cruse Control creative services Tel +44 (0) 1923 842 295 training@crusecontrol.com
More informationShape and Line Tools. tip: Some drawing techniques are so much easier if you use a pressuresensitive
4Drawing with Shape and Line Tools Illustrator provides tools for easily creating lines and shapes. Drawing with shapes (rectangles, ellipses, stars, etc.) can be a surprisingly creative and satisfying
More informationAdobe illustrator Introduction
Adobe illustrator Introduction This document was prepared by Luke Easterbrook 2013 1 Summary This document is an introduction to using adobe illustrator for scientific illustration. The document is a filleable
More informationCOPYRIGHTED MATERIAL. Adobe Illustrator CC Jumpstart. Lesson 1
Lesson 1 Adobe Illustrator CC Jumpstart What you ll learn in this lesson: Setting up an Artboard Creating and combining shapes Applying color with the new Kuler panel and effects Adding and adjusting text
More informationThe original image. Let s get started! The final result.
Vertical Photo Panels Effect In this Photoshop tutorial, we ll learn how to create the illusion that a single photo is being displayed as a series of vertical panels. It may look complicated, but as we
More information01 - Basics - Toolbars, Options and Panels
InDesign Manual 01 - Basics - Toolbars, Options and Panels 2017 1st edition This InDesign Manual is one of an introductory series specially written for the Arts and Humanities Students at UEA by the Media
More informationPhotoshop Introduction to The Shape Tool nigelbuckner This handout is an introduction to get you started using the Shape tool.
Photoshop Introduction to The Shape Tool nigelbuckner 2008 This handout is an introduction to get you started using the Shape tool. What is a shape in Photoshop? The Shape tool makes it possible to draw
More informationRecipes4Success. Animate Plant Growth. Share 4 - Animation
Recipes4Success In this Recipe, you will create an animated science diagram of plant growth. You will learn how to add images, draw shapes, use the animation options, preview, and publish your project.
More informationBasic Tools. Chapter 1. Getting started
Chapter 1 Basic Tools Getting started Jasc Paint Shop Pro is a powerful art package which you can use to paint, write text, retouch photos and make images ready for the web. After only a few lessons you
More informationCreating Multimedia SWF Products
Chapter InDesign can be used to create multimedia products that combine movie clips, sounds, images and animations into professional products that can be distributed on CD, DVD or as SWF files that can
More informationChapter 1. Getting to Know Illustrator
Chapter 1 Getting to Know Illustrator Exploring the Illustrator Workspace The arrangement of windows and panels that you see on your monitor is called the workspace. The Illustrator workspace features
More informationFig. A. Fig. B. Fig. 1. Fig. 2. Fig. 3 Fig. 4
Create A Spinning Logo Tutorial. Bob Taylor 2009 To do this you will need two programs from Xara: Xara Xtreme (or Xtreme Pro) and Xara 3D They are available from: http://www.xara.com. Xtreme is available
More informationTutorial 1 Engraved Brass Plate R
Getting Started With Tutorial 1 Engraved Brass Plate R4-090123 Table of Contents What is V-Carving?... 2 What the software allows you to do... 3 What file formats can be used?... 3 Getting Help... 3 Overview
More informationMAKING A TRIPTYCH IN PHOTOSHOP CC
MAKING A TRIPTYCH IN PHOTOSHOP CC Open Photoshop CC and create a New Document Remember, the images shown here are 'screen grabs from my computer. I am using Photoshop CC. Therefore your screen may look
More informationExploring the Workspace
Exploring the Workspace The illustration above shows a typical Create and Cut screen when first loading the software. See the coordinating sections below for an explanation of each shortcut button. Design
More information3ds Max Cottage Step 1. Always start out by setting up units: We re going with this setup as we will round everything off to one inch.
3ds Max Cottage Step 1 Always start out by setting up units: We re going with this setup as we will round everything off to one inch. File/Import the CAD drawing Be sure Files of Type is set to all formats
More informationDrawPlus X8. Quick Start Guide. Simple steps for getting started with your drawing.
DrawPlus X8 Quick Start Guide Simple steps for getting started with your drawing. In this guide, we will refer to specific tools, toolbars and tabs. Use this visual reference to help locate them on the
More informationMicrosoft Word 2016 by Prapaporn Techa-angkoon adapted into English by Dr. Prakarn Unachak
Microsoft Word 2016 by Prapaporn Techa-angkoon adapted into English by Dr. Prakarn Unachak 204100 IT AND MODERN LIFE 1. Microsoft Word 2016 Basics 2. Formatting: Font and Paragraph 3. Formatting: Layout
More informationWorking with Graphics and Text
Chapter 2 Working with Graphics and Text Learning Objectives After completing this chapter, you will be able to: Create vector graphics using drawing tools Modify the shape and size of the selected objects
More informationAdd Photo Mounts To A Photo With Photoshop Part 1
Add Photo Mounts To A Photo With Photoshop Part 1 Written by Steve Patterson. In this Photoshop Effects tutorial, we ll learn how to create and add simplephoto mounts to an image, a nice finishing touch
More informationAdobe Flash CS4 Part 1: Introduction to Flash
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Adobe Flash CS4 Part 1: Introduction to Flash Fall 2010, Version 1.0 Table of Contents Introduction...3 Downloading the Data Files...3
More information4 TRANSFORMING OBJECTS
4 TRANSFORMING OBJECTS Lesson overview In this lesson, you ll learn how to do the following: Add, edit, rename, and reorder artboards in an existing document. Navigate artboards. Select individual objects,
More informationAdobe Illustrator. Quick Start Guide
Adobe Illustrator Quick Start Guide 1 In this guide we will cover the basics of setting up an Illustrator file for use with the laser cutter in the InnovationStudio. We will also cover the creation of
More informationEDITING AND COMBINING SHAPES AND PATHS
4 EDITING AND COMBINING SHAPES AND PATHS Lesson overview In this lesson, you ll learn how to do the following: Cut with the Scissors tool. Join paths. Work with the Knife tool. Outline strokes. Work with
More informationAncient Cell Phone Tracing an Object and Drawing with Layers
Ancient Cell Phone Tracing an Object and Drawing with Layers 1) Open Corel Draw. Create a blank 8.5 x 11 Document. 2) Go to the Import option and browse to the Graphics 1 > Lessons folder 3) Find the Cell
More informationIntroduction To Inkscape Creating Custom Graphics For Websites, Displays & Lessons
Introduction To Inkscape Creating Custom Graphics For Websites, Displays & Lessons The Inkscape Program Inkscape is a free, but very powerful vector graphics program. Available for all computer formats
More informationCreate ruler guides. Create a ruler guide
Create ruler guides Ruler guides are different from grids in that they can be positioned freely on a page or on a pasteboard. You can create two kinds of ruler guides: page guides, which appear only on
More informationCreate a Flowchart in PowerPoint
Create a Flowchart in PowerPoint A flowchart is a diagram of steps, movements or actions involved in a system or activity. Flowcharts use conventional geometric symbols and arrows to define relationships
More informationWELCOME TO ALL-TECH SYSTEMS & CO INTRODUCTION TO MICROSOFT WORD TUTORIAL
WELCOME TO ALL-TECH SYSTEMS & CO INTRODUCTION TO MICROSOFT WORD TUTORIAL 1 Microsoft Office Word 2010 allows you to create and edit personal and business documents, such as letters, reports, invoices,
More informationWelcome to Desktop Publishing with InDesign!
Welcome to Desktop Publishing with InDesign! What We ll Cover Today What is InDesign? Preparing a print project Creating a new document InDesign interface Working with layers and links Formatting and managing
More informationThe University of Nottingham Second Life Building Tutorial
s Web Campus Sandbox is open to the public for anyone to practise their building and scripting skills. A personal building tutorial is available in the sandbox (simply click the crate beneath the sign
More informationUSER GUIDE DESIGN LAYOUTS
USER GUIDE DESIGN LAYOUTS Introduction COPYRIGHT Copyright 1998-2016. Wilcom Pty Ltd, Wilcom International Pty Ltd. All Rights reserved. All title and copyrights in and to Digitizer Embroidery Software
More informationQUARKXPRESS FOR MAC OS version 4.x KEYBOARD SHORTCUTS
QUARKXPRESS FOR MAC OS version 4.x KEYBOARD SHORTCUTS s Dialog Boxes Palettes Documents Items Text Editing Pictures MENU SHORTCUTS File Action New Document New Library Open Close Save Save as Revert to
More informationIntroduction. Using Shapes. Word 2010 Working with Shapes. Video: Working with Shapes in Word To Insert a Shape: Page 1
Word 2010 Working with Shapes Introduction Page 1 You can add a variety of shapes to your document including arrows, callouts, squares, stars, flowchart shapes and more. Want to set your name and address
More informationBasic Scene Composition
Basic Scene Composition Welcome to the Basic Scene Composition tutorial. This tutorial was designed to teach you how to many of Illustrator key tools to create a sunset scene, this should give you good
More informationHYPERSTUDIO TOOLS. THE GRAPHIC TOOL Use this tool to select graphics to edit. SPRAY PAINT CAN Scatter lots of tiny dots with this tool.
THE BROWSE TOOL Us it to go through the stack and click on buttons THE BUTTON TOOL Use this tool to select buttons to edit.. RECTANGLE TOOL This tool lets you capture a rectangular area to copy, cut, move,
More informationNote: Photoshop tutorial is spread over two pages. Click on 2 (top or bottom) to go to the second page.
Introduction During the course of this Photoshop tutorial we're going through 9 major steps to create a glass ball. The main goal of this tutorial is that you get an idea how to approach this. It's not
More information[Not for Circulation] This document provides a variety of shortcuts for working in PowerPoint 2007.
PowerPoint Shortcuts This document provides a variety of shortcuts for working in PowerPoint 2007. Using Slides from Other Presentations To add a slide from an existing presentation to the current presentation,
More informationKeys for selecting tools
Keys for selecting tools Use these shortcuts in the Tools panel. In most cases, you can momentarily switch tools by holding down the keyboard shortcut for the tool. Selection tool V V Rotation tool W W
More informationL E S S O N 2 Background
Flight, Naperville Central High School, Naperville, Ill. No hard hat needed in the InDesign work area Once you learn the concepts of good page design, and you learn how to use InDesign, you are limited
More informationAdobe PageMaker Tutorial
Tutorial Introduction This tutorial is designed to give you a basic understanding of Adobe PageMaker. The handout is designed for first-time users and will cover a few important basics. PageMaker is a
More informationAi Adobe. Illustrator. Creative Cloud Beginner
Ai Adobe Illustrator Creative Cloud Beginner Vector and pixel images There are two kinds of images: vector and pixel based images. A vector is a drawn line that can be filled with a color, pattern or gradient.
More information2. Move over to the workspace and left click (hold) and drag out a box.
Basic CAD Training Name Plate Project This is the nameplate project that is taught at our Reno, Nevada headquarters during our 2-day CAD Training Seminars. This is a great project to start learning the
More informationA Study of Angles & Curves
A Study of Angles & Curves Method 1: Cutting Quilt Shapes/Using the Shapes Tools Open BERNINA CutWork Software. Make sure that Create New is selected. Click Next. Place a dot in front of New Graphic. Select
More informationGoogle LayOut 2 Help. Contents
Contents Contents... 1 Welcome to LayOut... 9 What's New in this Release?... 10 Learning LayOut... 12 Technical Support... 14 Welcome to the LayOut Getting Started Guide... 15 Introduction to the LayOut
More informationIntermediate Microsoft Word 2010
Intermediate Microsoft Word 2010 USING PICTURES... PAGE 02! Inserting Pictures/The Insert Tab! Picture Tools/Format Tab! Resizing Images! Using the Arrange Tools! Positioning! Wrapping Text! Using the
More information