Configuration Utility
|
|
- Mavis McKenzie
- 5 years ago
- Views:
Transcription
1 Features Confi gure dipoles using the GUI or the command line. Create and save custom dipole confi gurations to a fi le. Create and save custom (overlay) packets, including: 21-bit high resolution packets Shock and vibration packets Import custom packets into Detect Software. Save confi gurations from dipoles. Write confi gurations to dipoles. Automatically creates a log fi le for each session. Applications Confi gure Model AP250 EM MWD Systems Supported Devices Applied Physics Systems EM Dipole Confi guration Utility is part of the Applied Physics Systems Software Suite, which includes: *Confi guration Utility Depth Tracker Detect Directional Sensor Confi guration Firmware Update Sensor Firmware Update Utility Log Viewer Universal Roll Test Virtual Drill *For more information about Applied Physics Systems Confi guration Utility Software, see Help. Use Confi guration Utility to confi gure Model AP250 EM MWD Systems. Confi guration Utility consists of a GUI with menus, icons, and tabs. The Terminal tab is a command line interface Basic - Confi gure the basics for the dipole, such as encoding mode and frequency. Sensors - Confi gure settings for sensors. Battery - Confi gure different settings for battery use. Custom Packets - Create custom packets for dipoles. Dipole Control - Confi gure different settings for dipole transmission. Terminal - Enter commands to confi gure dipole from the command line. Page 1 of East Java Drive, Sunnyvale, CA USA Fax: service@appliedphysics.com
2 Menus Confi guration Utility has 4 menus. Some of the menu items can also be accessed using the icons. File Menu Device Menu Tools Menu Help Menu Load Confi guration From File Save Confi guration To File Load Default Confi guration Load Only Custom Packets Collect All Confi guration Write All Confi guration Collect Only Custom Packets Write Only Custom Packets Connection Settings Reconnect Sync Device Time with System Time Confi g Help About Loads the confi guration fi le and displays it in the utility. Saves the confi guration displayed into the utility to a fi le. Resets the dipole to the factory default confi guration. Loads only custom packets and displays them in the utility. Collects the dipole s confi guration and displays it in the utility. Writes the confi guration displayed in the utility to the dipole. Collects only custom packets from the dipole and displays it in the utility. Writes only custom packets displayed in the utility to the dipole. Selects the COM port and baud rate to communicate with the dipole. Queries the dipole to establish communication. Resets the dipole s clock to the MWD laptop s clock. Displays Confi guration Utility Help. Displays the product, version, and contact information. Icons Confi guration Utility has 9 icons. The fi rst 6 functions listed below can also accessed through the menu. Load Confi guration From File Save Confi guration To File Collect All Confi guration Write All Confi guration Load Default Confi guration Sync Device Time with System Time Terminal Font Size (8-30) Activate / Deactivate Tool Tips Pause Terminal Same as File > Load Configuration From File on the menu. Same as File > Save Configuration To File on the menu. Same as Device > Collect All Configuration on the menu. Same as Device > Write All Configuration on the menu. Same as File > Load Default Configuration on the menu. Same as Tools > Sync Device Time with System Time on the menu. Sets the font size in the Terminal tab. Activates or deactivates the messages when the cursor hovers over some confi gurable fi elds. Stops the terminal from scrolling Page 2 of Space 281 East Park Java Way Drive, Suite Sunnyvale, B, Mountain CA View, CA USA USA Fax: Fax: service@appliedphysics.com aps2g@appliedphysics.com
3 The Basic Tab Use the Basic tab to view, change, and save basic dipole confi guration settings, such as encoding mode and frequency. Initially, when a dipole is connected to the MWD laptop running Confi guration Utility and communication is established, EM Dipole Detected is displayed on the status bar at the bottom of the screen. Once communication is established and the dipole confi guration has been collected, this screen displays the dipole confi guration and the status bar displays Current configuration displayed. The status bar also displays other informational messages. Some fi elds, such as fi rmware version, records used, and records available are read-only. All other settings displayed on this screen can be modifi ed and saved Page 3 of East Java Drive, Sunnyvale, CA USA Fax: service@appliedphysics.com
4 The Sensors Tab Use the Sensors tab to view or confi gure settings for sensors. Once the dipole confi guration has been collected, this screen displays the sensor confi guration and the status bar displays Current configuration displayed. The status bar also displays other informational messages. Some fi elds, such as version, pressure offsets and scales are read-only. All other settings displayed on this screen can be modifi ed and saved Page 4 of Space 281 East Park Java Way Drive, Suite Sunnyvale, B, Mountain CA View, CA USA USA Fax: Fax: service@appliedphysics.com aps2g@appliedphysics.com
5 The Battery Tab Use the Battery tab to confi gure the batteries and display the confi guration. Select the battery confi guration. Confi gure the batteries to determine at which voltage the tool will switch from drawing power from the fi rst battery to other batteries. Set the voltage for a low battery warning. Display and print battery statistics. Note: You must enter the starting value (Joules) for each battery before the other fi elds in this section are automatically populated with data Page 5 of East Java Drive, Sunnyvale, CA USA Fax: service@appliedphysics.com
6 The Custom Packets Tab Use the Custom Packets tab to create and save custom packet settings for dipoles. Create custom packets in the Custom Packets tab. Import custom packets into Detect. View custom packets from the Custom Packets tab and at the command line from the Terminal tab. The examples below show a 21-bit high resolution custom packet and a shock and vibration custom packet. In the fi rst example, only 21-bit fi elds are in this packet. Other fi elds were removed. In the second example, a shock and vibration fi eld was added to the packet. 21-bit High Resolution Custom Packet Shock & Vibration Custom Packet Page 6 of Space 281 East Park Java Way Drive, Suite Sunnyvale, B, Mountain CA View, CA USA USA Fax: Fax: service@appliedphysics.com aps2g@appliedphysics.com
7 The Dipole Control Tab Use the Dipole Control tab to confi gure dipole transmission for the following: To start sending data and to pause transmission. To put the dipole into a low power mode for long term storage. To automatically start transmitting when rotation has begun (when rotation is enabled). To put the system to sleep until drilling begins. To stop the timers before the dipole begins sending data. To auto reboot, if transmission stops. To enable or disable transmit timeout Page 7 of East Java Drive, Sunnyvale, CA USA Fax: service@appliedphysics.com
8 The Terminal Tab Use the Terminal tab to enter commands to communicate with dipoles. Commands can be used to view the current confi guration and to change the confi guration. Enter commands at the command prompt >. Click Pause Terminal to stop the screen from scrolling when viewing output. Below are some commonly used commands and their output displayed on Terminal tab. > cdf Displays the dipole frequency. > cds Displays the data sequence selected. > * Resets the dipole. Below are some additional useful commands. >? Press the space bar and use the scroll bar on the right to view a list of basic and advanced commands. > #D Starts the dipole transmissions Page 8 of Space 281 East Park Java Way Drive, Suite Sunnyvale, B, Mountain CA View, CA USA USA Fax: Fax: service@appliedphysics.com aps2g@appliedphysics.com
MWD Software Datasheet
Features Confi gure inputs to and outputs from. Collect and display unfi ltered, live bit run data from the EM dipole. Save bit run data to a fi le. Playback previously recorded bit run data. Display parity
More informationEZ Series In-Site CL control panel EZ Connect Mobile ios User Guide
SUPPORTED PLATFORMS EZ Series In-Site CL control panel EZ Connect Mobile ios User Guide Revision 0.1 The EZ Connect Mobile ios application was developed for use with Apple phones and ipads that meet the
More informationInstallation Guide. DVI Net ShareStation GDIP201 PART NO. M1048
Installation Guide DVI Net ShareStation 1 GDIP201 PART NO. M1048 2 Table of Contents Package Contents 4 Hardware Installation 5 USB Server software installation - XP 10 DisplayLink software installation
More informationWeb Power Switch 5 USER S GUIDE
Web Power Switch 5 USER S GUIDE Product Features Congratulations on selecting the DLI Web Power Switch, a surge-suppressed, AC power switch with automatic reboot and programmable power control. Features
More informationBlackBerry. User Guide
BlackBerry User Guide Table of contents 0 BlackBerry Internet Service for new users 1 Getting started... P. 2 2 Set up your email account via smartphone... P. 3 3 Set up your email account via website
More informationIP NETWORK CAMERA CMP-NWIPCAM20 CMP-NWIPCAM30
IP NETWORK CAMERA CMP-NWIPCAM20 CMP-NWIPCAM30 ENGLISH INSTRUCTIONS Quick Installation Guide (please refer to the full English manual on CD for specifi c details) 1. Package contents 1 Internet Camera 1
More informationDataView Release Notes Version Released
DataView Release Notes Version 3.53.0013 Released 9-25-2018 CATEGORY (v 3.53.0013): Simple Logger II Version 1.01.0059 Open button is now active when selecting recordings from the session s list. Corrected
More informationDataView Release Notes Version
DataView Release Notes Version 3.53.0011 Released 1-30-2018 CATEGORY Updates (v 3.53.0011): DataView Core Version 3.53.0011 Fixed on issue with the scroll bar on the events page of a report from a PEL
More informationGraphical User Interface V1.0.3
Graphical User Interface V1.0.3 Application User Guide 2015 MCI Solutions. All rights reserved. 240815-01 www.mcisolutions.ca Page ii Getting Started Table Of Contents Introduction.................................................
More informationSetting up T&D s TR-7wf Data Loggers With the TR-7wf/nw for Windows Software
Setting up T&D s TR-7wf Data Loggers With the TR-7wf/nw for Windows Software V1.00 The TR-7wf Series of Wi-Fi enabled wireless loggers ship from the factory pre-configured for seamless integration with
More informationGIGABYTE Remote Management Console User s Guide. Version: 1.0
GIGABYTE Remote Management Console User s Guide Version: 1.0 Table of Contents Using Your GIGABYTE Remote Management Console...2 Software Install...3 Prerequisites on remote management PC...3 Install Java
More informationInstallation Guide. T8/R8 Series T8-SML T8-LTE ENERGY METER BUILDING AUTOMATION SYSTEM TEMP SENSOR PRESSURE SENSOR 10K TYPE mA COM V+ A COM
T8/R8 Series Installation Guide V+ A B COM T8-SML ENERGY METER V+ A B COM R8 T8-LTE V+ INPUT 1 COM V+ INPUT 2 COM 4-20mA V+ COM PRESSURE SENSOR BUILDING AUTOMATION SYSTEM 10K TYPE 2 TEMP SENSOR Thank Welcome!
More informationVSM Manager. The VSM Manager is a Windows GUI that can be installed to serially control Genesis Matrixes with a firmware of version 2.5 or later.
VSM Manager Table of Contents Overview...1 Getting Started...1 Toolbar... 2 Serial Connection... 2 Refresh... 3 Help... 3 Tab Pages... 4 General... 4 Control...5 Schedule... 6 Command... 6 Communications...
More information1. Registration on Acutec
Instruction Manual Instruction Manual KIMETER 2.0 1. Registration on Acutec Enter the site and perform register at www.acutec.com.br. Use a valid email address. This register provides the warranty on your
More informationAccessing VXView 3. Checking Messages 4. Folder Tabs/Toolbar 5. Message Area 6. Almost Full Warning 7. Managing Address Books 8. Adding a Contact 9
CONTENTS Accessing VXView 3 Checking Messages 4 Folder Tabs/Toolbar 5 Message Area 6 Almost Full Warning 7 Managing Address Books 8 Adding a Contact 9 Modifying a Contact 10 Importing Contacts 11 Exporting
More informationFarm Works Mobile with Geonics Sensors
Farm Works Mobile with Geonics Sensors Introduction. Farm Works Mobile is a mobile mapping, scouting and data logging program from Trimble. Farm Works Mobile is designed to communicate via an RS232 serial
More informationOS-TSC13 TSC Commercial Basic Panel User Manual OPERATOR S MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
OS-TSC13 TSC Commercial Basic Panel User Manual OPERATOR S MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its
More informationAccess control that easily integrates into the modern world
TruPortal Access control that easily integrates into the modern world QUICK START GUIDE Introduction TruPortal access control solutions have been engineered and designed to install quickly and easily right
More informationReno A & E, 4655 Aircenter Circle, Reno, NV (775) Release Date: February 5, 2008 All Reno A&E monitors. All versions of RaeComM.
Product: RaeComM Title: RaeComM Basics Release Date: February 5, 2008 Scope: All Reno A&E monitors. All versions of RaeComM. Installing RaeComM The most current version of RaeComM software is available
More informationUser Manual Portable Laptop Console Crash Cart Adapter
User Manual Portable Laptop Console Crash Cart Adapter GUC211V PART NO. M1458 www.iogear.com 2017 IOGEAR. All Rights Reserved. Part No. M1458. IOGEAR, the IOGEAR logo is trademarks of IOGEAR. Microsoft
More informationHama GmbH & Co KG D Monheim/Germany
Hama GmbH & Co KG D-86651 Monheim/Germany www.hama.com All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms
More informationTable of contents. 1 Instructions 3. 2 Enrolment and Verification 8. 3 Lock Function Information and Settings Other Functions 18.
User Manual Version 1.1 Date: June 2012 Table of contents 1 Instructions 3 1.1 Introduction to L7000.............3 1.2 List of Installation Accessories..........3 1.3 Installation Requirements...........4
More informationHDCP2.2, HDMI2.0) OPERATION MANUAL
AU-11CA-4K22 HDMI Audio Embedder with built-in Repeater (4K, HDCP2.2, HDMI2.0) OPERATION MANUAL SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment
More informationMonitoring Location Servers and Site
8 CHAPTER This chapter describes how to monitor location servers by configuring and viewing alarms, events, and logs. It also describes how to use Cisco WCS to view location server, client and asset tag
More informationHD 2CH Wi-Fi DVR FOCUS BLACK BOX
Biz conference material. HD 2CH Wi-Fi DVR FOCUS BLACK BOX Mobile App. Manual (v0.4) 1 / 22 Table of contents 1. Android App 1) App Download 2) App Layout 3) Wi-Fi Connection 4) Real-Time Video Mode on
More informationRST INSTRUMENTS LTD.
RST INSTRUMENTS LTD. VW0420 Analog VW Interface Instruction Manual Ltd. 11545 Kingston St Maple Ridge, BC Canada V2X 0Z5 Tel: (604) 540-1100 Fax: (604) 540-1005 Email: Info@rstinstruments.com i VW0420
More informationIntroduction 1. Getting Started 9. Working with Virtual CD OPS 21
Table of Contents Introduction 1 Foreword 3 What Virtual CD Option Pack Server Can Do for You 4 Virtual CD OPS Program License 4 Document Conventions 5 System Requirements 6 Technical Support 7 Getting
More informationCONTENTS CHAPTER I: BEFORE USE I. BEFORE USE
I. BEFORE USE Foreword 1. Features 2. Accessories 3. Product Safety Information 4. Illustrations and Functions II. FAST OPERATION 1. Startup 2. Shutdown 3. Lock 4. Reset 5. Pause 6. Music File Select 7.
More informationSoftware Manual ASM [PRO]
Manual Installation guidelines/software description Software Manual ASM [PRO] Antenna System Manager Version 2.00 Antenna System Manager Professional Edition Version 2.00 Contents Contents... 2 1 Licence
More informationHDCP2.2, HDMI2.0) OPERATION MANUAL
AU-11CD-4K22 HDMI Audio De-embedder (up to 5.1) with built-in Repeater (4K, HDCP2.2, HDMI2.0) OPERATION MANUAL SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate
More informationMANUAL: Remote Operator Station with Display User s Guide
MANUAL: Remote Operator Station with Display User s Guide INSTRUCTIONS FOR SETUP, SAFE OPERATION AND MAINTENANCE This instruction manual covers the menu-driven software and display, and is intended for
More informationLYNX Monitors USER & INSTALLER'S MANUAL ENGLISH
s USER & INSTALLER'S MANUAL ENGLISH User and installer s manual for LYNX MONITORS This manual includes basic instructions for the installation, programming and commissioning of LYNX monitors. Code 970013I
More informationDirectOut Technologies
DirectOut Technologies D.O.TEC ANDIAMO Remote Software Guide Version 1.2 DirectOut Technologies page 2 of 69 D.O.TEC ANDIAMO Remote - Version 1.2 2013 DirectOut GmbH DirectOut Technologies Copyright Note
More informationUser's Manual. DAQMaster MW100 Ethernet/IP Instruction Manual
User's Manual DAQMaster MW100 Ethernet/IP Instruction Manual DAQMaster MW100 Ethernet/IP Instruction Manual IM MW100EIP 2nd Edition: Apr. 2007 Table of Contents Table of Contents... 1 Introduction... 2
More informationAdding Event Markers to an E-Prime Experiment
Adding Event Markers to an E-Prime Experiment This tutorial shows you how to add ClearView PackageCall objects to an existing experiment in order to perform scene-based analyses in Tobii Studio. This tutorial
More informationECE E-IM FANCommander 200
Software description FANCommander 200 EN BA-ECE 03 Software Release 2015-11-25 ECE 03-0200-5E-IM FANCommander 200 Menu Line Curser Position [.] marked + Time Time Alarm Log Memory full Manual guideline:
More informationCOOL WORKS LITE USER'S MANUAL
MDUG-CWL/08225E-01 Rev.1 Utility software for Cool Muscle COOL WORKS LITE USER'S MANUAL [ Ver. 4.3.2 ] I N D E X Chapter 1 Installation Chapter 2 Startup and Initial Settings Chapter 3 General Terminology
More informationCOPYRIGHT AND LEGAL NOTICES
English Novation A division of Focusrite Audio Engineering Ltd. Windsor House, Turnpike Road, Cressex Business Park, High Wycombe, Bucks, HP12 3FX. United Kingdom Tel: +44 1494 462246 Fax: +44 1494 459920
More informationWeb Site: Forums: forums.parallax.com Sales: Technical:
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
More informationUser Manual. PPS-02-S, IP dongle GUI & SNMP. Inspired by Your Data Center. Designed and manufactured by Austin Hughes
Inspired by Your Data Center User Manual PPS-02-S, IP dongle GUI & SNMP W Monitored Wi Outlet Monitored WS Switched WSi Outlet Switched Single Phase 230V / 208V / 110V Single Phase 63A 230V Three Phase
More informationTechnical c Documentation. SureSine LVD Adjustment
Technical c Documentation t o n SureSine LVD Adjustment Abstract: Low Voltage Disconnect/Reconnect Adjustment v01 The SureSine 300W Inverter comes with two factory default Low Voltage Disconnect/Reconnect
More informationBattery Management Innovation
Battery Management Innovation Universal Stationary Battery Analyzer For testing stationary batteries used in UPS systems, power utility, and telecommunications industries INSTRUCTION MANUAL This page intentionally
More informationSTELLARIUM INSTRUCTION MANUAL
System Requirements: Windows (XP, Vista, 7) with DirectX 9.x and latest ServicePack or MacOS X 10.3.x (or higher), 3D graphics card with OpenGL support, a minimum of 512 MB RAM, 1 free hard drive space.
More informationLink 4 Battery Monitoring System User Guide
Link 4 Battery Monitoring System User Guide Table of Contents Introduction... 3 Navigation... 4 Installing Link Software... 5 Logging In For The First Time... 6 Adding A New Battery Monitor System... 7
More informationQuick Setup Guide. LinkStation MultiMedia Home Server HS-DGL Series. Package Contents:
Quick Setup Guide LinkStation MultiMedia Home Server HS-DGL Series Package Contents: Main unit (LinkStation) 1 LinkStation Base Plate 1 Base Rubber Feet 4 Ethernet Cable 1 Power Cord 1 LinkNavigator Installation
More informationINTERFACE & SOFTWARE GUIDE
TM INTERFACE & SOFTWARE GUIDE Wireless Remote Display USB Converter Battery Sensor Setup DataLogger Software r e m o t e i n t e r f a c e escape enter status w w w. s k y s t r e a m e n e r g y. c o
More informationMFC8870DW Windows 7 Network Connection Repair Instructions
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine
More informationSoftware Manual ASM PRO. Antenna System Manager
Manual Installation guidelines/software description Software Manual ASM PRO Antenna System Manager Version 3.5 Contents Contents... 2 1 Licence Agreement... 5 2 Documentation... 6 2.1 The Manual: ASM_Manual_3.5.pdf...
More informationAST2500 ibmc Configuration Guide
AST2500 ibmc Configuration Guide Version 1.0b Copyright Copyright 2017 MITAC COMPUTING TECHNOLOGY CORPORATION. All rights reserved. No part of this manual may be reproduced or translated without prior
More informationMonitoring Location Servers and Site
8 CHAPTER This chapter describes how to monitor location servers by configuring and viewing alarms, events, and logs. It also describes how to use Cisco WCS to view location server, client and asset tag
More informationSoftware for personal trackers. User Manual
Software for personal trackers User Manual MyTrack SOFTWARE FOR PERSONAL TRACKING User Manual September Edition 2009 Limitation of Liability The Manufacturer reserves the right to modify the software or
More informationVALCON EasyWriter Ver1.0E Manual
VALCON EasyWriter Ver1.0E Manual E05172-K00022-00 Published Dec.2010 Ver3-1.03 HKS Co., Ltd. Revision History Revision Date 2008/12/10 First Edition (Ver3-1.01) 2010/4/2 Second Edition (Ver3-1.02) 2010/12/22
More informationRST INSTRUMENTS LTD.
RST INSTRUMENTS LTD. ThermArray System Instruction Manual PC Platform Ltd. 11545 Kingston St Maple Ridge, BC Canada V2X 0Z5 Tel: (604) 540-1100 Fax: (604) 540-1005 Email: Info@rstinstruments.com i RST
More informationCodesoft 6 Premier Overview Manual. Thermocode Series 2 (all Printers)
Thermocode Series 2 Codesoft Overview Manual. (Issue 4.1) 28 July 2003 Page No. - 1 - Open Date Equipment Ltd. Unit s 8 & 9 Puma Trade Park, 145 Morden Road, Mitcham, Surrey. CR4 4DG United Kingdom. Tel:-
More informationDIESEL ON: FAQS I PRESS THE BUTTON BUT THE HANDS JUST SPIN AROUND ONCE AND THEN STOP. WHAT'S WRONG?
DIESEL ON: FAQS GENERAL SET-UP & APP PAIRING-SYNCING BATTERY FEATURES ACTIVITY TRAINING 3RD PART INTEGRATION SLEEP SLEEP TRACKING GOAL TRACKING LINK NOTIFICATIONS ACCOUNT AND DEVICE SETTING PRIVACY GENERAL
More informationWSDA User Guide
User Guide Version 8500-0029 rev. 006 WSDA -1000 User Guide www.microstrain.com Little Sensors, Big Ideas. 2012 by 459 Hurricane Lane, Suite 102 Williston, VT 05495 Phone 802-862-6629 Fax 802-863-4093
More informationUser Manual. Backup Utility for MiniStation MiniStation. v 2.0
User Manual Backup Utility for MiniStation MiniStation www.buffalotech.com v 2.0 MiniStation Utility Installation Install the Backup Utility by running the EasySetup Wizard from the MiniStation CD (This
More informationOWNER S & INSTALLATION LATIO GUIDE
OWNER S & INSTALLATION LATIO GUIDE THIS IS A TEMPORARY COVER THE FINAL COVER IS IN A SEPARATE FILE TOUCH SCREEN COLOR 2-WAY UPGRADE KIT 20 THIS IS A TEMPORARY COVER THE FINAL COVER IS IN A SEPARATE FILE
More informationTemperature-Humidity Sensor Configuration Tool Rev. A 1/25/
Rev. A 1/25/213 172 Contents Contents Temperature-Humidity Sensor Configuration Tool... 3 Read Sensor Screen... 3 Manual Calibration Screen... 4 Register View Screen... 5 Modbus Registers... 6 Reprogram
More informationGUIDE MWD SURFACE SYSTEM
GUIDE MWD SURFACE SYSTEM SOFTWARE VERSION 5.1 FEATURE SPOTLIGHT: REAL-TIME SHOCK & VIBRATION If this guide is distributed with software, firmware, and hardware that includes an end-user agreement, this
More informationPTZ cameras will continue to track an object as long as it remains in view of an associated SightSensor or until one of the following occurs:
4 SightSensors support for select analog and IP domes. This document describes setting up the SightTracker with supported analog cameras. SightTrackers enable PTZ cameras to automatically aim at a target
More informationUser Guide Plantviewer V2.x.x.x
User Guide Plantviewer V2.x.x.x FeCon GmbH Eckernförder Landstraße 78 D-24941 Flensburg Tel.: +49-(0)461-430122-0 Fax: +49-(0)461-430122-11 Mail: info@fe-con.com Web: www.helios-systems.net All rights
More informationManagement Console User s Guide (AST 2500 Chipset)
Management Console User s Guide (AST 2500 Chipset) Version: 1.2 Table of Contents Using Your Management Console... 2 Management Console Key Features and Functions... 3 Software Install... 4 Prerequisites
More informationTemposonics. User s Manual. MH-CAN Testkit. CANopen & SAE J1939. Absolute, Non-Contact Position Sensors. Document Part Number.
Temposonics Absolute, Non-Contact Position Sensors MH-CAN Testkit Document Part Number 551292 Revision A CANopen & SAE J1939 Kit includes the CAN Test Interface software with a user friendly Graphical
More informationStart. Complete. Tips for hardware. Prepare a notebook computer. Configure IP setting. InfraBox installation. Smartcard handle installation
Tips for hardware Prepare a notebook computer To install IP setup utilities Start Configure IP setting For each InfraBox ONE by ONE InfraBox installation Place the rackmount box on the top rear side of
More informationDriver Station Log File Viewer
Driver Station Log File Viewer In an effort to provide information to aid in debugging, the FRC Driver Station creates log files of important diagnostic data while running. These logs can be reviewed later
More informationDCP585CW Windows Network Connection Repair Instructions
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine
More informationALERT2 System & Field Maintenance
ALERT2 System & Field Maintenance A Guide to ALERT2 Field Maintenance using your ALERT2 Field Decoder Austin Seback Arriving at your alert2 station Rain, Meteorology Stream Communication Software Field
More informationXBee Starter Kit Getting Started Guide
XBee 802.15.4 Starter Kit Getting Started Guide 90002160_A 6/20/2012 2012 Digi International Inc. All rights reserved. Digi, Digi International, the Digi logo, the Digi web site, a Digi International Company,
More informationLVM Touch Screen Centralized Controller
User Manual 2016 Lennox Industries Inc. Dallas, Texas, USA LVM Touch Screen Centralized Controller CONTROLS 507584-02 02/2016 THIS MANUAL MUST BE LEFT WITH THE OWNER FOR FUTURE REFERENCE Equipment List
More informationCoin Manager CN MDB Installation Guide-Canada. Set Up Screen Features (Continued) GENERAL INFORMATION
Set Up Screen Features (Continued) Fig.18 Coin Manager 7512 CN MDB Installation Guide-Canada GENERAL INFORMATION To View errors - Press the yellow mode button (highlighted View ) to gain access. Use the
More informationaaxa TECHNOLOGIES User Guide
aaxa TECHNOLOGIES User Guide Caution! WARNING: Please use this product as instructed. Misuse may cause injury or death. DO NOT use while driving DO NOT expose to water or wet surfaces. Electric shock may
More informationSNTL300P-PCSUITE interface suite
yi6508 issue A, 2016-10-06 SNTL300P-PCSUITE interface suite Configuration and Monitoring software for Sentinel 300P automatic switch mode battery chargers Installation and Operation Manual SNTL300P-PCSUITE
More informationFor EWay.com users. EWay Navigation. Accessing EWay. Logging in to EWay. Forgot Password or User ID. EWay Online Catalog Navagation B
Reference reference guide. Accessing EWay 1. Launch your Web Browser. 2. Click in the Address fi eld. 3. Type www.eway.com. 4. Press the Enter key. Logging in to EWay 1. Enter your User ID in the fi eld
More informationRIVA / Athena Pro-Series ECU
RIVA / Athena Pro-Series ECU USING SOFTWARE (MAYA) Running Maya for First Time Once installed, Maya is available in the Start menu under Programs -> Maya, or from a desktop short cut, if created. The first
More informationWindows user guide for version 3.3
1 Windows user guide for version 3.3 2 Contents 1. Installation...4 1.1. How to install BABEL on your Windows desktop...4 2. Getting started...5 2.1. First run...5 2.2. Password setup...5 2.3. Key import...5
More informationWagner Smart Screen Service/Troubleshooting Screens
Section 7-2 Wagner Smart Screen Service/Troubleshooting Screens Menu Button PIN code login When you fi rst click on the Menu button, you will be prompted for a PIN code. Enter 0070 and click the check
More informationInstallation Guide. GCN1000 PCPortal GCN1000 PART NO. M0566
Installation Guide GCN1000 PCPortal GCN1000 PART NO. M0566 Table of Contents Package Contents 4 Conventions System Requirements 5 Video Operating systems Components 6 Computer Preliminary Setup 8 GCN1000
More informationMDrive Hybrid Integrated motion systems with Hybrid Motion Technology. MDrive 34 Hybrid Step Torque Speed
MDrive Hybrid Integrated motion systems with Hybrid Motion Technology MDrive 34 Hybrid Description MDrive Hybrid Presentation The MDrive Hybrid is a very compact motion system that solves many servo applications
More informationRemote Display User Manual
Remote Display User Manual 1 Contents: Introduction - Features... 3 Hardware Overview... 4 Quick-Start Guide... 5 Android Application Operation... 6 Launching and Connecting... 6 Main Display... 7 Configuring
More informationMDrive Hybrid Integrated motion systems with Hybrid Motion Technology. MDrive 34 Hybrid Step Torque Speed
MDrive Hybrid Integrated motion systems with Hybrid Motion Technology MDrive 34 Hybrid Description MDrive Hybrid Presentation The MDrive Hybrid is a very compact motion system that solves many servo applications
More informationUPGRADING FIRMWARE FROM DEVICE UTILITY: 32-BIT SYSTEMS
Release Notes Sarix Firmware for Esprit IP, ExSite IP, and Spectra IV H.264 Series Cameras This document describes the software features and major fixes for cameras and positioning systems that use Sarix
More informationFIFOTRACK PARAMETER TOOL USER GUIDE V1.1
FIFOTRACK PARAMETER TOOL USER GUIDE V1.1 Copyright 2015 fifotrack All rights reserved 1 Copyright and Disclaimer: All copyrights belong to Shenzhen fifotrack Solution Co., Ltd. You are not allowed to revise,
More informationACCESS CONTROL SYSTEM FA00190-EN CONFIGURATION MANUAL RBM84 - SW. English
ACCESS CONTROL SYSTEM FA00190-EN CONFIGURATION MANUAL RBM84 - SW EN English 2 ACCESS CONTROL SYSTEM - CONTROL SOFTWARE TOPIC SUMMARY PAGE Ch. 1 - System configuration Software installation...4 Software
More informationDSView. Installer/User Guide
DSView Installer/User Guide DSView Installer/User Guide Avocent, the Avocent logo, The Power of Being There, OutLook, DSView, AutoView, DSR, Dambrackas Video Compression, Click and Connect and OSCAR are
More informationEmbedded Vision Processor. CMUcam3 SDK Installation Guide
SDK Installation Guide April 29, 2006 This page intentionally left blank. Contents 1. INTRODUCTION...1 2. INSTALLING DEVELOPMENT TOOLS...2 Cygwin...2 GNU ARM GCC...6 Philips LPC210x FLASH Utility...8 The
More informationBookmarks & Saved Pages Using Bookmarks & Saved Pages RSS Feeds Updating Blogs & News...6-9
Services... -2 Service Basics... -2 Yahoo! Keitai... -3 Using Yahoo! Keitai... -3 PC Sites...-5 Browsing PC Sites... -5 Browsing...- Basic Operations... - Bookmarks & Saved Pages... -8 Using Bookmarks
More informationADVANCED OPERATOR PANEL (AOP)
ADVANCED OPERATOR PANEL (AOP) Operating Instructions Issue 04/02 English Contents 1 Warnings and Notes 3 1.1 Special Key Functions 4 2 Applications Examples 4 2.1 Single drive control using the AOP 4 2.2
More informationFaxFinder Fax Servers
FaxFinder Fax Servers Models: FF130 FF230 FF430 FF830 Client User Guide FaxFinder Client User Guide Fax Client Software for FaxFinder Series PN S000460B, Version B Copyright This publication may not be
More informationCHC HCE320 GNSS Data Controller User Guide
CHC HCE320 GNSS Data Controller User Guide Revision 1.0 8/05/2018 1 Table of Contents Table of Contents Table of Contents... 2 1 Product Introduction... 3 1.1 Brief Introduction... 3 1.2 Product Accessories...
More informationRN-WIFLY-EVAL-UM. WiFly Evaluation Kit Roving Networks. All rights reserved. RN-WIFLY-EVAL-UM-1.0 Version /8/2011 USER MANUAL
RN-WIFLY-EVAL-UM WiFly Evaluation Kit 0 Roving Networks. All rights reserved. RN-WIFLY-EVAL-UM-.0 Version.0 //0 USER MANUAL OVERVIEW This document describes the hardware and software setup for Roving Networks
More informationGetting Started Guide
Getting Started Guide Cingular 3125 C I N G U L A R M A K E S B U S I N E S S R U N B E T T E R Table of Contents Welcome to Cingular 2 What s in the Box? 2 Get To Know Your 3 Set Up Your 4 Insert Battery
More informationZENDA Manager User Guide. Applicable Model: ZD-VT1
ZENDA Manager User Guide Applicable Model: ZD-VT1 Change History File Name ZENDA Manager User Guide Created By Owen Cheng Project ZD-VT1 Creation Date 2016-01-18 Update Date 2016-02-02 Subproject User
More informationSignal Interface Processor ADVANCED MANUAL PRELIMINARY
www..eu PRELIMINARY Signal Interface Processor ADVANCED MANUAL is a part of elettromedia - 62018 Potenza Picena (MC) Italy - www.elettromedia.it Product Description Bit One is a signal digital processor
More informationPhotoFrame 8FF3WMI. Quick start guide. Connect. Setup. Enjoy
PhotoFrame 8FF3WMI Quick start guide 1 2 3 Connect Setup Enjoy EN Connect Setup Enjoy 8FF3WMI What s in the box Philips Wireless Digital PhotoFrame Stand AC-DC power adaptor PhotoFrame Quick start guide
More informationAdditional products and features
SECTION 7.3: adding national instruments hardware Step: 1 In order to record data from a National Instruments device, you must fi rst install NI-DAQmx software from the National Instruments website. http://ftp.ni.com/support/softlib/multifunc-
More informationAPPLICATION NOTES. Advanced Graphical Interface - AGI Internal PLC (CODESYS V3) SHENDONG
APPLICATION NOTES Advanced Graphical Interface - AGI Internal PLC (CODESYS V3) SHENDONG CODESYS V3 logic running on AGI 300/400 series product Support of Modbus/TCP and RTU communication Use of remote
More informationRITZ / Turbine controls DISPLAY
RITZ / Turbine controls DISPLAY CANCEL EXIT OK MENU F1 F2 F3 F4 The control/display unit has a CPU, an LCD display and 8 keys. 2 LEDs also display particular operational conditions (e.g. plant ON, faults,
More informationSAS Report Viewer 8.3 Documentation
SAS Report Viewer 8.3 Documentation About SAS Report Viewer Introduction to SAS Report Viewer SAS Report Viewer (the report viewer) enables users who are not report designers to view a report using a web
More informationSoftware user guide M A. software
Software user guide M-9572-0058-05-A software Contents Page 1. General Information 2 1.1. Minimum system requirements 2 1.2. SiGNUM software features 2 2. Installation 3 2.1. Software installation 3 2.2.
More information