Livezi Central. 4 speed fan Control System. Operating Instructions
|
|
- Ambrose Willis
- 5 years ago
- Views:
Transcription
1 Livezi Central 4 speed fan Control System Operating Instructions
2 2 1 Operating Instructions The following pages detail the operation of the various control system types available for the Livezi ducted systems. 1.1 Livezi Central Controller (single zone) Touchpad layout Liquid Crystal Display screen with scrolling system status c T A Mode=Aut Adjust setpoint, scroll through options and change variables. Access parameter adjustment. Save variables and advance to next field. Adjust indoor fan speed. SET ZONE Turn system on and off. MODE CLOCK Adjust the current time or program. Access mode selection screen. Adjust setpoint, scroll through options and change variables.
3 1.1.2 Turning the system on or off 1. Press to turn the system on or off as required. When the system is off the display appears like this. Livezi Off A (Livezi Air Conditioning scrolls across the top line). When the system is on the following information is displayed. Setpoint Operating Mode T = Timer program R = Run timer 22.5 c R A Load=30% Conditioning Mode A = Auto C = Cool H = Heat v = Vent Upper Case indicates compressor is energised. Scrolling System Status Mode=Auto Load=85% Fan=900L/s Temp=23.0 Status=Cooling Selecting the conditioning mode 1. Press MODE to access the mode selection screen. Mode= Auto 2. Use or to select the required mode (select from Auto, Cool, Heat or Vent). 3. Press SET to save and exit Adjusting the indoor fan speed 1. Press FAN to access the fan speed adjustment screen. Fanspeed =100% 2. Press or to increase or decrease the fan speed setting (adjustable from 100% to 30% in 10% steps). 3. Press SET to save and exit. 3
4 Setting the required temperature (setpoint) 1. Press or or SET to access the setpoint adjustment screen. Set=22.5 c Tmp=23.0 c 2. Use or to adjust the set point to the desired level. 3. Press SET to save and exit Setting the run timer The run timer is activated when the system is turned on manually. The timer begins counting down from the set value and turns the system off when the run timer period has expired. To disable the run timer set it to --:--Hrs. 1. Press and hold SET for 10 seconds to access the run timer screen. RunTimer --:--Hrs 2. Use or to alter the value in 10 minute increments. 3. Press SET to save and exit Clock Functions The optional clock module must be installed to enable the clock functions. These are then accessible via the clock display screen. 1. Press clock to view the clock display screen. 10:12 p Tu 02Oct, Press SET to enter the clock menu screen. S etclock SetProgs 3. Use or to cycle the cursor to the desired menu option, then press SET to access the edit screen for that option Setting the clock 1. Select SetClock from the clock menu, then press SET to edit the system time. 1 0 :12am 02Oct, The cursor will highlight the Hour value. Use or to select the correct hour (watch for am/pm), then press SET. 3. Repeat this procedure for the Minutes, Day, Month and Year values. 4. After pressing SET to accept the Year, the display will return to the clock display screen.
5 1.1.8 Setting the timer programs Active Programs will appear in CAPITALS (PROG 02 = active; prog 02 = not active) To disable a timer program, select a start & stop time of --:--, or make all days inactive. 1. Select SetProgs from the clock menu, press SET to access the timer program selection screen. P ROG 02 prog Use or to select the timer program to be edited, then press SET to edit the start time. The cursor will highlight the minutes value. Start: 0 8 :4 0 am 3. Use or to select the correct time in 10 minute increments, then press SET to edit the stop time. Stop: 0 5 :3 0 p m 4. Use or to set the stop time then press SET to access the run day selection screen. The cursor will highlight the first letter on the bottom line, representing Sunday. A/C Day s smtwtfs 5. Press the to turn this program on (S is upper case), or to turn the program off (s is lower case) for this day. 6. Press SET to save and move the cursor to the next day. 7. Press CLOCK to go back if required. 8. Repeat this procedure for each day of the week. 9. Press SET at Saturday to save the program and return the display to the program selection screen. Use or to select another program and repeat the process. 10. Use or to navigate to the Exit option and press SET when finished Setting holidays Active Holidays will cause the system to ignore timer program signals. Holidays may be set as single days, or as blocks. Dates are inclusive. For a one day holiday, enter the same start and stop date. All holiday programs must have a start and stop date to be valid. To disable a holiday program, set it s start or stop date to Active Holidays will appear in CAPITALS (HOL 02 = active; hol 02 = not active) 1. Select Set Hols from the clock menu screen then press SET to display the holiday program selection screen. HOL 0 2 hol 03 5
6 6 2. Use or to select the Holiday program to be edited, then press SET. The cursor will highlight the Month value. Start: De c31 3. Use or to select the correct Month, then press SET. 4. Use or to select the correct Day, then press SET. The display will change to the stop date screen. Stop: Ja n Repeat the procedure to set the stop date for the holiday. 6. The display will revert to the holiday selection screen and the cursor will highlight the last holiday edited. Use or to select another program and repeat the process. 7. Use or to navigate to the Exit option and press SET when finished Daylight savings The daylight savings function advances the clock s time by 1 hour whilst the current date and time are between the start and stop dates set. To disable daylight savings, simply select a start date of (Typically: Southern Hemisphere = Oct 31...Mar 31; Northern Hemisphere = Mar 31...Oct 31) 1. Select Day Save from the clock menu screen, then press SET to select the start date for daylight savings. The cursor will highlight the Month value. Start: Oc t31 2. Use or to select the correct Month, then press SET. 3. Use or to select the correct Day, then press SET. The display will change to the stop date screen. Stop: Ma r Repeat the procedure to set the stop date for daylight savings. When finished the display will revert to the clock menu screen. Note: The 1 hour advance occurs at 1:59 am (advances to 3:00 am) and the 1 hour revert occurs at 2:59 am (reverts to 2:00 am).
7 Notes
8 Livezi Phone Fax Web:
Touchpad User Guide. National Sales. Product Support. Freecall: Ph:
Touchpad User Guide National Sales Ph: 1300 306 125 sales@ias.net.au Product Support Freecall: 1800 354 434 support@ias.net.au Designed and Manufactured in Australia by: Innovative Air Systems Pty Ltd.
More informationTouchpad User Guide (Model: C-LCD-122-TL)
MESSAGE LIBRARY Refer to BBP-5 Instal Guide for information on input triggers. The same message may be linked to more than one trigger. ABBREVIATED VERSION DISPLAYED IN SELECTION SCREEN MESSAGE DISPLAYED
More informationThe UP and DOWN buttons will toggle or scroll through the options in each section.
TECHNICAL BULLETIN: MWR-WE10, MWR-WE10N, MWR-WE11N Page 1 of 10 Throughout the scheduling process, the LEFT and RIGHT buttons will move forward and backward through each section of settings The UP and
More informationBACVIEW MANUAL Software Version 3.06 INSTALLATION AND OPERATION MANUAL
BACVIEW MANUAL Software Version 3.06 INSTALLATION AND OPERATION MANUAL 641-K31 1 BACVIEW INSTALLATION AND OPERATION IMPORTANT: This manual is for use with controller ZONE I/O 560 FHP part number 641-224
More informationHome Manager System Model TS40B Wall Display Operating Instructions
4700 Lang Avenue McClellan, CA 95652 1.800.BEUTLER www.beutler.com Home Manager System Provides control for Heating and Air Conditioning Zoning Option SmartVent Option Security System Interface Option
More informationBUP2 5/2 12/4/07 12:49 AM Page 1. Introduction
BUP2 5/2 12/4/07 12:49 AM Page 1 Introduction This booklet will give you easy to follow instructions to allow you to set your BUP2 Programmer to the Weekday/Weekend, (same times Monday - Friday, different
More informationINSTRUCTIONS FOR USING THE CONTROL PANEL
DIGIT SED ELECTRONIC CONTROLLER WITH LCD DISPLAY 1.09.370E 10.01.2007 VALLOX These instructions replace and complement the instructions for use and maintenance of the following VALLOX units: VALLOX DIGIT
More informationBUT2 7day 11/4/07 11:07 PM Page 1. Introduction
BUT2 7day 11/4/07 11:07 PM Page 1 Introduction This booklet will give you easy to follow instructions to allow you to set your BUT2 Timeswitch to the 7 Day, (different times every day) program. Contents
More informationRWB29 Programmer. Daily Programming
RWB29 Programmer Daily Programming RWB29 Controls ON WHEN LIT EXTEND ADVANCE RESET MENU/SELECT UP & DOWN BACK/EXIT Introduction This booklet gives you easy to follow instructions allowing you to set your
More informationPocket Quick. Reference Guide. On the TOSHIBA RBC-AMS51E. Remote Controller
Pocket Quick Reference Guide On the TOSHIBA RBC-AMS51E Remote Controller Quick Reference Guide To assist service engineers working on Toshiba air conditioning equipment, there is a large quantity of data
More information2 Zone Time Clock. User Guide UFHTIME2B
2 Zone Time Clock User Guide UFHTIME2B Overview The 2 Zone Time Clock is designed to work with the Dial Thermostat (UFHDIALB) to provide time control per manifold. Time clock also has 1 other zone which
More informationPocket Quick Reference Guide On the TOSHIBA
Pocket Quick Reference Guide On the TOSHIBA RBC-AMS51E / RBC-AMS54E Remote Controller Quick Reference Guide To assist service engineers working on Toshiba air conditioning equipment, there is a large quantity
More informationAMBIFLEX MF626 - USER GUIDE
AMBIFLEX MF626 - USER GUIDE CONTENTS Page No Product Overview 2 Features 3 Standby Display 4 User Facilities 5 Status Display Mode 6 Measured Temperatures 6 Time Channel Information 7 What is happening
More informationFCU-4 FAN COIL CONTROLLER
FCU-4 FAN COIL CONTROLLER BACnet Enabled Description The FCU-4 is designed to provide complete control of fan coil units. The FCU-4 incorporates all the inputs and outputs to ensure that this advanced
More informationDaikin HVAC Controls Guide Specification
Part 1 - General VARIABLE REFRIGERANT VOLUME (VRV) HVAC SYSTEM Advanced Multi-zone Controller 1.01. Physical characteristics A. General: The advanced multi-zone controller shall be made from plastic materials
More informationWall mounted units. Please read carefully and thoroughly this manual before operating this unit and save it in a safe place for future reference.
OWNERS' MANUAL REMOTE CONTROLLER Wall mounted units Please read carefully and thoroughly this manual before operating this unit and save it in a safe place for future reference. Warning. Be sure there
More informationBB5-Lite TECHNICAL MANUAL
BB5-Lite TECHNICAL MANUAL Product Support 1800 354 434 CC - BB5 - LITE LITE with Plug & Play technology www.blackbox.net.au Designed by IAS in Brisbane Made in Australia Product Support 1800 354 434 www.ias.net.au
More informationHeatmiser MC Operating Instructions
Heatmiser MC Operating Instructions Contents Setting Up the MC Contents 1 Pre setup Routine 2 Setup Routine 2 Clock setup 3 Code setup 3 Stat setup 4 Thermostat RUN Mode Information screen 5 Info button
More informationCommunicating Wall Control Owner s Manual TSTAT0101SC
C O M M U N I C A T I N G S Y S T E M Communicating Wall Control Owner s Manual TSTAT0101SC U.S. Patent No. 7,243,004 U.S. Patent No. 7,775,452 616 02 1018 00 02/28/14 Table of Contents Introduction...
More informationRBC-AMT32E / RBC-AMS41E
Pocket Quick Reference Guide On the TOSHIBA RBC-AMT32E / RBC-AMS41E Remote Controllers Quick Reference Guide To assist service engineers working on Toshiba air conditioning equipment, there is a large
More informationMicroprocessor based Temperature / CO2 Controller c/w 365 Day Time Switch & Modbus Communication.
HTC-DIGITAL-LCD Microprocessor based Temperature / CO2 Controller c/w 365 Day Time Switch & Modbus Communication. Features Use Australian Made and designed LCD 2 X 16 Character Backlit Display Five Programmable
More informationInstallation, Start-up and Operating Instructions
Installation, Start-up and Operating Instructions EVOLUTION SMART SENSOR FOR ZONING Cancels: NEW II ZONESMS-0-1 7-04 NOTE: Read the entire instruction manual before starting the installation. This symbol
More informationZONETOUCH DAMPER CONTROL SYSTEM Operation Manual
ZONETOUCH DAMPER CONTROL SYSTEM Operation Manual www.zonemaster.com.au www.polyaire.com.au 2012 Polyaire Pty Ltd TABLE OF CONTENTS 1) Features 2 2) Wall Controller Layout (Touchpad) 2 3) Manual On/Off
More informationTEMPERATURE CONTROLLER 2 HEAT/ 2 COOL with Digital Room Temperature Display. Made in Australia 100% Australian Owned Company
TEMPERATURE CONTROLLER 2 HEAT/ 2 COOL with Digital Room Temperature Display HTC 5 Features Australian Made and designed Power can be either 24V or 240V AC 10 Amp (Resistive) Potential free relay contacts
More informationV0STAT51P-2 Programmable Wired Controller
PRODUCT SPECIFICATIONS VARIABLE REFRIGERANT FLOW SYSTEMS VRF V0STAT51P-2 Programmable Wired Controller Bulletin No. 210766 March 2016 Grouping - Controller can control up to 16 indoor units on the same
More informationOperating Instructions. Radio timer thermostat display. Table of contents
Operating Instructions Table of contents 1. On these instructions... 2 2. How the radio timer thermostat display functions... 2 3. Normal view in the display... 3 3.1. Basic operation of the radio timer
More informationModel FP700 Owner s Instructions
The benefits of owning a Freedom Advantage Thermostat Large easy to read backlit display Selectable programming modes: 5-2, 5-1-1 or 7 day Manufactured by the makers of ACCUSTAT controls ServiceWatch for
More informationMeasure & Control Temperature & CO2 levels with analog & digital I/O
MADE IN OZ HTC-DIGITAL-LCD PROGRAMMABLE TEMPERATURE CONTROLLER c/w YEARLY PROGRAMMABLE TIME SWITCH COMPATIBLE WITH A WIDE RANGE OF SENSORS ROOM O/A WALL DUCT PIPE Use Features Measure & Control Temperature
More informationProgrammable Room Thermostat. User Guide UFHPROGB & UFHPROGRFB
Programmable Room Thermostat User Guide UFHPROGB & UFHPROGRFB Overview The Programmable Room Thermostats Range (UFHPROGB & UFHPROGRFB) provides time and temperature control for a space of up to 40m 2.
More information16 Amp 1 Channel Multi Purpose Programmer User Instructions
ES1247B16A 16 Amp 1 Channel Multi Purpose Programmer User Instructions Thank you for choosing ESi Controls. All our products are tested in the UK so we are confident this product will reach you in perfect
More informationChronomax Time Switch
Naztec Operations Manual For Chronomax Time Switch Version 1.x/2.x/3.x April 2003 Published by: Naztec, Inc. 820 Park Two Drive Sugar Land, Texas 77478 Phone: (281) 240-7233 Fax: (281) 240-7238 Copyright
More informationThank you for purchasing this
ENGLISH Thank you for purchasing this product. Please read these instructions carefully before using your TDC Timer. TDC Timer User Manual Document Version TDC-VSA01-3.3 INTRODUCTION The TDC Timer has
More informationChilled Water REMOTE CONTROLLER OPERATION MANUAL MAN-O-CRC4AH intensity.mx
Chilled Water REMOTE CONTROLLER OPERATION MANUAL intensity.mx MAN-O-CRC4AH-061 CONTENTS Remote Controller Specifications---------------------------------------1 Performance Features-----------------------------------------------------1
More informationOperation Guide CT101
Operation Guide CT101 PG 1 The CT101 communicating Z-Wave thermostat operates via a high-quality, easy-to-use touch screen. To set or adjust your CT101, simply touch your finger firmly to the screen. The
More informationOperating Instructions
33CS Comfort System Software CONTENTS Page GENERAL...1 OPERATION...1-11 Start-Up...1 Main Menu...2 CURSOR MOVEMENT AND FUNCTION SELECTION Initial Setup and Configuration...3 BASIC MODE EXPERT MODE MODEM
More informationTemperature control unit
Temperature control unit 5739 18/19 Installation manual Part. U3582A - 12/08-01 PC Contents 1 - Introduction 5 1.1 - Warnings and tips 5 1.2 - Contents of package 5 2 - Description of the Control unit
More informationREMOTE CONTROLLER CS244-R OWNER S MANUAL
OWNER S MANUAL REMOTE CONTROLLER Please read this Owner's Manual carefully before operation. Save this manual in a safe place for future reference. CS-R . After setting the TIMER, there will be a one-half
More informationOPERATION MANUAL. Room thermostat EKRTW
OPERATION MANUAL 1 1 2 3 1 2 4 1 2 1 2 3 4 5 6 7 8 11 12 13 14 9 10 15 16 17 18 19 20 21 22 23 2 WARNINGS Never let the thermostat get wet, this may cause an electric shock or fire. Never press the buttons
More informationOPERATION INSTRUCTIONS
2018 Lennox Industries Inc. Dallas, Texas, USA OPERATION INSTRUCTIONS V0STAT52 Wireless Indoor Unit Controller CONTROLS 507459-04 05/2018 This manual must be left with the owner for future reference. IMPORTANT
More informationScottishPower Connect. User Guide
ScottishPower Connect User Guide Downloading and using the ScottishPower energy app The ScottishPower app lets you control Connect whenever you re out and about. If you re a ScottishPower Gas & Electricity
More informationSoftware Programming Guide. A 4510 Software Programming Guide A 4510 Yearly Timer. Redback Proudly Made In Australia
www.altronics.com.au Software Programming Guide A 4510 Yearly Timer Redback Proudly Made In Australia Distributed by Altronic Distributors Pty. Ltd. Phone: 1300 780 999 Fax: 1300 790 999 Internet: www.altronics.com.au
More informationWIRED REMOTE CONTROLLER OPERATION MANUAL
WIRED REMOTE CONTROLLER OPERATION MANUAL BRCE6 Thank you for purchasing this product. This manual describes safety precautions required for the use of the product. Read this manual carefully and be sure
More information3000 CONTROLLER TRAINING MANUAL. April 26, 2012 Software Version
3000 CONTROLLER TRAINING MANUAL April 26, 2012 Software Version 1.59.03 Contents 3000 CONTROLLER USER GUIDE Quick Reference: Using the 3000... 3 Menu Summary Tree... 6 Main Menu: Programming your Fryer...
More informationSMARTLINC T: Multiple Lock System. AUthorised dealer:
AUthorised dealer: SMARTLINC Multiple Lock System logic module & set-up instructions TIME DELAY Programmable on each lock Period: Delay 1-99 minutes Period: Open 1-19 minutes Counting Delay mode selectable
More informationModel: EP210. Dual channel programmable controller. Installation Manual
Model: EP210 Dual channel programmable controller Installation Manual Contents Introduction... 3 Product Compliance... 4 Safety Information... 4 Box content... 4 Features... 5 Installation... 5 Button
More informationDaikin HVAC Controls Guide Specification
Part 1 - General VARIABLE REFRIGERANT VOLUME (VRV) HVAC SYSTEM Advanced Multi-zone Controller 1.01. Physical characteristics A. General: The advanced multi-zone controller shall be made from plastic materials
More informationModular Service Tool SD Quick Start Guide
www.orioncontrols.com Quick Start Guide Requires Code: SS1063 VCCX2 Controller Code: SS1088 VCC-X Controller Code: SS1079 and SS1062 VCB-X Controller Code: SS1051 Version 2.0 and up VCM-X Controller Code:
More informationWavePRO Wireless Programmable T2500 Thermostat & R2500 Receiver OPERATING MANUAL. Model K
WavePRO Wireless Programmable T2500 Thermostat & R2500 Receiver OPERATING MANUAL Model K2500-001 1 THE PECO WAVEPRO WIRELESS SYSTEM Thank you for choosing the PECO WavePRO TM Wireless System (Model K2500-001).
More informationSimplified Operating Instructions T105-C / T108-C / T106-C / T17B-C DISPLAYS DAY OR DAY BLOCK PROG 00:0000 PROG PROG ALWAYS OFF
Button Operations Simplified Operating Instructions T105-C / T108-C / T106-C / T17B-C R - Reset (with pen or other pointed instrument). Y - Enters function setup. +/- Buttons to scroll through icons. Y
More informationIO-INTERFACE. Procon. INSTALLATION MANUAL Version 1.01 MITSUBISHI ELECTRIC FOR INSTALLERS
Procon IO-INTERFACE FOR INSTALLERS INSTALLATION MANUAL Version 1.01 For safe and correct use, please read this installation manual thoroughly before installing the PROCON IO-INTERFACE. MITSUBISHI ELECTRIC
More information7 Day Digital Programmer 1 Channel Surface Mount
7 Day Digital Programmer 1 Channel Surface Mount Model: TRT034N Installation & Operating Instructions 1. General Information These instructions should be read carefully and retained for further reference
More informationAirTouch 2 Zone Control System
AirTouch 2 Zone Control System User Manual www.polyaire.com.au 2016 Polyaire Pty Ltd Liability Please read the instructions before installing this Zonemaster Zoning Control System. Polyaire Pty Ltd does
More informationOperation 6035 ENGLISH PROG MENU
Operation 6035 PROG MENU ENGLISH Operation 6035 Program button Time of day Day Time Slot Current Room Temperature Target Temperature Menu button PROG MENU FAN AUTO ON COOL OFF HEAT Fan Switch Touch Screen
More informationDigital Room Thermostat for Underfloor Heating Applications
ERT50 230v Digital Room Thermostat for Underfloor Heating Applications Instruction Manual Model No ERT50 230v PRODUCT COMPLIANCE This product complies with the essential requirements of the following EC
More informationYCCS Handheld VAV Balancing Tool
YCCS Handheld VAV Balancing Tool Technical Guide NS-ATV7003-0 643518-YTG-B-1010 Document Introduction This document describes how to use the NS-ATV7003-0 Handheld Variable Air Volume (VAV) Balancing Tool
More informationExactLogic BACnet Communicating Pressure Dependent VAV Damper Control with Heat EXL01820 Sequence Datasheet
ExactLogic BACnet Communicating Pressure Dependent VAV Damper Control with Heat EXL01820 Sequence Datasheet DataSheet ev 1.12.307/4.0 June 14, 2018 Operating Sequence Standard Occupied During normal occupied
More informationHome Screen...4. Quick Start Guide...5. MyAir Standalone Zone Controls only...5. MyAir Zone Controls With Integrated Unit On/Off Control...
User Manual Home Screen...4 Quick Start Guide...5 MyAir Standalone Zone Controls only...5 MyAir Zone Controls With Integrated Unit On/Off Control...5 Getting Started...6 Daily Usage and Seasonal Adjustment...7
More informationEmployee Access Guide
1 Employee Access Main Me nu The Main Menu is the first screen you see when logging in to Employee Access. This screen provides a brief description of each task available. The tasks are listed as links
More informationKrontek KT2010 Dual Circuit Krontek Signal Controller
Krontek KT2010 Dual Circuit Signal Controller 1 INTRODUCTION The Krontek KT2010 Signal Controller is a Programmable Controller with an autosensing 10/100Mbit Ethernet Interface. It provides two output
More informationOperation Guide CT32 ENGLISH
Operation Guide CT32 The CT32 communicating thermostat operates via a high-quality, easy-to-use touch screen. To set or adjust your CT32, simply touch your finger firmly to the screen. The screen will
More informationTHE OPERATOR INTRODUCTION 2 ACCESSING YOUR SYSTEM 2 FUNCTIONS OF THE "OPERATOR" 3 PROGRAMMING/CHANGING ACCESS CODES 12 ACTIVATING EMERGENCY ALARMS 13
THE OPERATOR INTRODUCTION 2 ACCESSING YOUR SYSTEM 2 FUNCTIONS OF THE "OPERATOR" 3 SECTION I. CHECKING SYSTEM STATUS 3 SECTION II. USING THE MENU 4 SECTION III. ARMING YOUR SECURITY SYSTEM 5 SECTION IV.
More informationCCS Handheld VAV Balancing Tool Technical Bulletin
CCS Handheld VAV Balancing Tool Technical Bulletin NS-ATV7003-0 Code No. LIT-12011470 Software Release 1.2 Issued July 15, 2011 Supersedes January 14, 2009 Refer to the QuickLIT Web site for the most up-to-date
More informationpco 3 Controller User Manual ASPX Digital Scroll, Air Packaged Chiller For Version MCDSV_A02
pco 3 Controller User Manual ASPX Digital Scroll, Air Packaged Chiller For Version MCDSV_A02 pco 3 Controller User Manual Introduction The Airstack Chiller is a modular air-cooled chiller composed of
More informationInstructions for Use
Instructions for Use V 1.3 March 2012 For definitions of all items and terms used in these instructions go to www.general-alert.com/support/definitions Contents Page Description 2 Security 2 Base Unit
More informationCONTROLLER INSTALLATION OPERATION & QUICK START
CONTROLLER INSTALLATION OPERATION & QUICK START Controller: 8403-066 ECU Series Controller Manual: 2100-559 Supersedes: NEW File: Tab 19 Date: 05-02-11 Page 1 of 6 TABLE OF CONTENTS Installation Note...
More informationQuick Start. MyAir4 User Manual. This section will give you a brief description about each of the buttons found on the home screen.
User Manual Quick Start... 3 HOME... 4 SIMPLE TIMER... 4 AIR CON... 5 ZONES... 6 PROGRAMS... 7 HELP... 11 SETTINGS... 12 MyZone - (optional feature)... 15 Constant Zones... 17 Android Tablet... 18 Smart
More information7 Day Digital Programmer 2 Channel Surface Mount
7 Day Digital Programmer 2 Channel Surface Mount Model: TRT036N Installation & Operating Instructions 1. General Information These instructions should be read carefully and retained for further reference
More informationA quick look at the basic functions of the Hercules Programmable Controller by
A quick look at the basic functions of the Hercules Programmable Controller by Basic Manual Operations Recall a Preset Switch a Relay Sweep All Relays Basic Programmable Features Time Events Photocell
More informationTORK DG100 / DG120 DIGITAL TIME SWITCH SEVEN DAY
TORK DG100 / DG120 DIGITAL TIME SWITCH SEVEN DAY READ INSTRUCTIONS CAREFULLY BEFORE SETTING UNIT FEATURES Single channel controller 7 day scheduling Special day scheduling 32 set points Battery back-up
More informationIntesisBox KNX. User Manual v10 r10 eng. Mitsubishi Electric air conditioners (Domestic & Mr.Slim lines) Release V.0.2
IntesisBox KNX Mitsubishi Electric air conditioners (Domestic & Mr.Slim lines) Release V.0.2 User Manual v10 r10 eng Intesis Software S.L. All Rights Reserved. Information in this document is subject to
More informationLED Dot Matrix Digital Clock. Instructions. Contents. v (5x7-1x6 Module)
LED Dot Matrix Digital Clock v1.0.2 (5x7-1x6 Module) Instructions Designer: Yan Zeyuan. China Website: E-mail: yanzeyuan@163.com Contents Attention... 2 Functional Features... 2 Technical Specifications..
More informationCentral Controller G-50A/GB-50 Web Browser Operation Manual (For Managers)
Mitsubishi Electric Building Air-conditioner Control System Central Controller G-50A/GB-50 Web Browser Operation Manual (For Managers) Contents 1 Introduction...1 1-1 Conventions Used in This Manual...1
More informationSetpoint Limits. Setpoint Limits products.koer.com Page 1 of 7
2017 products.koer.com Page 1 of 7 INTRODUCTION Learn how to change between which user can change the desired Setpoint 2017 products.koer.com Page 2 of 7 Step 1 Enter Advanded Menu ONLY AUTHORIZED MAINTENANCE
More informationAP41 / AP81 SERIES TIME SWITCHES
FN:AP41_81M1.DOC AP41 / AP81 SERIES TIME SWITCHES AP41 AP81 TABLE OF CONTENTS INTRODUCTION 2 SPECIFICATIONS 2 INSTALLATION 5 FRONT PANEL DESCRIPTION 7 OPERATION 8 Filling out the Program Record Sheet 8
More informationAX-CNDR-HCE Digital room controller, 0-10V heating, cooling and fanspeed
Product overview The AX-CNDR-XXX range of Digital Room Controllers feature a high-contrast blue backlit display with white text, and fit a standard single gang pattress. The unit has selection for an internal
More informationRBC-AMS55E-ES RBC-AMS55E-EN
Wired Remote Controller Model name: RBC-AMS55E-ES RBC-AMS55E-EN Read this manual before using the RBC- AMS55E-ES, RBC-AMS55E-EN remote controller. Refer to the Installation Manual supplied with the indoor
More informationModel: Available in : Sapphire Black and Glacier White
Model: Available in : Sapphire Black and Glacier White 1 Table of Contents Product Image 1 Locking/Unlocking the SmartStat 20 Table of Contents 2 Standby/Away Mode 21 What is a Programmable Room Thermostat?
More informationSINGLE. Technical Data Book Zone Control Systems
SINGLE Technical Data Book Zone Control Systems Zone control system 2 I. Zone control system 1 Zone controller & remote temperature sensor 1. MWRZS00 / MWRZS10 / MRWTS 1) Features.... 4 2) Product specification...
More informationInstruction Manual Digital socket box timer
Instruction Manual Digital socket box timer Grässlin UK Vale Rise Tonbridge/Kent TN9 TB Tel. (0 ) 98 88 Fax (0 ) www.tfc-group.co.uk OK page Safety precautions, short description, wiring diagram... Installation...
More informationT7350 Keypad Configuration
Setup Using Keypad T7350 Keypad Configuration QUICK GUIDE NOTE: Refer to Fig. 1 and Table 2 for keypad description and details. A combination of key presses are required to use the Installer Setup feature:
More informationSTRA-17 Room controller. Installation and maintenance manual. Content
Content Installation preparations... Wiring diagram...3 Display handling...5 Technical data...6 Configuration...7 Operating modes...7 Controller modes...7 Activation operating modes...7 Control states...8
More informationOPERATION MANUAL. Remote controller BRC1D527
OPERATION MANUAL 1 3 6 23 7 8 9 2 1 4 12 14 17 10 11 22 25 16 13 15 18 19 20 21 5 24 29 33 26 35 27 36 37 28 30 31 32 34 1 2 Start 5s 5s 5s 5s + 5s End 2 WARNING - Never let the remote controller get wet,
More informationST9100A User Guide. Features
Features Easy to use slider and buttons combined with LoT Technology and an OK button, allows you to confirm changes and stay in control. PLEASE RESPECT YOUR ENVIRONMENT! Take care to dispose of this product
More informationERT50T Triac Noiseless Digital Room Thermostat for Underfloor Heating Applications
ERT50T Triac Noiseless Digital Room Thermostat for Underfloor Heating Applications Instruction Manual Model No ERT50T Triac 2 PRODUCT COMPLIANCE This product complies with the essential requirements of
More informationExactLogic BACnet Communicating Zone Damper EXL01710 Sequence Datasheet
ExactLogic BACnet Communicating Zone Damper EXL01710 Sequence Datasheet DataSheet ev 1.12.302/4.3 October 27, 2014 Operating Sequence Standard Occupied During normal occupied operation the display will
More informationOWNER S MANUAL WIRE CONTROLLER OF AIR CONDITIONER. MODEL: KJR-12B/DPBG(T)-E Brivis Part No:B026000
OWNER S MANUAL WIRE CONTROLLER OF AIR CONDITIONER MODEL: KJR-12B/DPBG(T)-E Brivis Part No:B026000 Brivis Climate Systems Pty Ltd Tel:1300 BRIVIS brivis.com.au Thank you very much for purchasing our product.
More informationZone Manager INSTALLATION MANUAL 40KMC KMQ QNC QNQ
40KMC------301 40KMQ------301 40QNC------3 40QNQ------3 INSTALLATION MANUAL Installation manual This control system only operates with indoor units of the following models: 40KMC------301 and 40KMQ------301
More informationUser s Guide TG Series C. Senva Sensors 9290 SW Nimbus Ave Beaverton, OR 97008
User s Guide TG Series Senva Sensors 9290 SW Nimbus Ave Beaverton, OR 97008 154-0031-0C Rev. Release Date By Description of Change ECR 0A 4/14/2016 CKB Initial Release --- 0B 3/7/2017 CKB Updated for RS485
More informationModel: Available in : Sapphire Black and Glacier White
1 Model: Available in : Sapphire Black and Glacier White 1 Table of Contents Product Image 1 Locking/Unlocking the SmartStat 20 23 Table of Contents 2 Standby/Away Mode Mode 21 24 What is a Programmable
More informationDPP601. Portable Programmer Installation Manual. contents
DPP601 Portable Programmer Installation Manual contents Introduction.. 2 Set the Time Clock..... 4 Controls.... 2 Run a Task... 5 Menu..... 2 Enable or Disable an Event.. 5 Menu Map. 3 Recall a Preset....
More informationWinPak 2 & 2005 Quick Reference
WinPak 2 & 2005 Quick Reference Initializing a Panel (sending changes in the programming to the panels) From the menu bar select Operations Control Map Click the (+) to expand the tree and display the
More informationKRONTEK KT4000 NETWORK MASTER CLOCK
KRONTEK KT4000 NETWORK MASTER CLOCK KT4000 Master Clock - 1 - Rev 1.0 21-Oct-2007 Table of contents INTRODUCTION... 4 Keys and Indicators... 5 Programming the KT4000 via the network... 6 Main Menu... 7
More informationE101B SINGLE 7/22/07 10:02 PM Page 1
E101B SINGLE 7/22/07 10:02 PM Page 1 E101B SINGLE 7/22/07 10:02 PM Page 2 TABLE OF CONTENTS Section Page Installation Instructions and Capabilities.................... 1 Key Functions....................
More informationFCU-4 FAN COIL CONTROLLER
FCU-4 FAN COIL CONTROLLER BACnet Enabled Description The FCU-4 is designed to provide complete control of fan coil units. The FCU-4 incorporates all the inputs and outputs to ensure that this advanced
More informationIS-ZW-RC-1 Remote Control Installation Sheet
GE Security IS-ZW-RC-1 Remote Control Installation Sheet Description Z-Wave technology is designed to automate lighting/home control and provides easy remote operation of all your Z-Wave enabled devices.
More informationModel: Touchpad (TFT) Model: TFT
Model: Touchpad (TFT) Model: TFT 1 Model: Touchpad TFT Table of Contents Set-Up Product Image Table of Contents Installation Procedure Initial Setup Setting the Clock LCD Display My System Locking the
More informationGES-102NDM GES-152NDM GES-102NSM
UPS Status Module For Traffic Applications With GES-102NDM GES-152NDM GES-102NSM Operators Manual Version 1.1 THIS PAGE IS INTENTIONALLY BLANK Note The instructions contained in this manual are not intended
More informationAT-3000 USER S MANUAL
Allied Time USA AT-3000 USER S MANUAL 2 User's Manual 1.0 GENERAL INFORMATION 1.1 Introduction Thank you for purchasing AT-3000 time recorder. This time recorder is ready to use out of the box. However,
More informationOPERATION MANUAL.
OPERATION MANUAL 1 2 The Prodigy control system is the latest example of Lennox commitment to advanced HVAC technology. Standard on every Strategos rooftop unit, the Prodigy control system makes setup,
More informationDEKKER KNOWLEDGE DATABASE KNOWLEDGE IS POWER
DEKKER KNOWLEDGE DATABASE For Use with DEKKER Vacuum Systems Equipped with the DEKKER Controller Each Vmax system is tested and checked at the factory prior to shipment to ensure trouble-free operation.
More information