GPS Road Logger Concerto-B User Manual

Transcription

1 GPS Road Logger Concerto-B User Manual MAP electronics co.,ltd. 1

2 Concerto-B GPS Road Logger User Manual Specifications and accessories. P.3 Introduction and operation. P.4~7 Outline introduction..... P.4 Main page introduction. P.5 Riding Inf. & GPS Inf. introduction.... P.6 Setting page introduction... P.7 Program Installation.... P.8~11 Driver Installation P.8~10 Application Program Installation.... P.11 Connection mode select..... P.12 Application Program introduction.. P.13~18 GPS Mouse Mode introduction P.19~20 How to build a photo file to Google earth P.21~23 MAP electronics co.,ltd. 2

3 Spec. and Accessories Concerto-B Li-ion Battery USB Charger & Cable Bike Holder CD SIZE WEIGHT 75 x 42 x 18 mm 60g(with battery) DISPLAY LCD * 128 MEMORY USB Battery FLASH 2M Max. recording trace:99 Max. recording point:130,848 USB Connector (Standard 5PIN) / charge Li-ion battery (Japanese battery cell) Capacity:920mAh Operation time:over 9 hours (with backlight on mode) PS.: Inside a building under lower signal circumstance, Concerto consumes more power to search satellite signal. USB Charger GPS chip Bike Holder CD Input : 100~240 VAC, 0.25A 50/60Hz Output : 5.0Vdc, 1.0A/5.0W(MAX.) USB wire : 1m MStar Holder Bike clipper Tying string x2 Rubber pad x1 Driver AP User Manuel System Only for Windows 2000 XP Vista 7 Not available for Macintosh and Linux. MAP electronics co.,ltd. 3

4 Outline and screen introduction Front side Rear side Bottom side Battery Cover On / Off Previous /Left Enter Next / Right USB connector MAIN PAGE Turn On/Off:Push power key for 3 second to turn on Concerto Auto Enter Turn On Main Push left or right key to select page Riding Inf. GPS Inf. Setting MAP electronics co.,ltd. 4

5 Main Page Main POI Save In Main page push Enter key The POI will be saved Bike mode icon This Bike mode icon will flash when record function is on. Satellite No. Number of satellite signals receiving Battery Capacity When battery low power Concerto will show Battery low on screen for a alarm If you did not do anything concerto will auto save your record and power off Time / Riding Time Time and riding will start when Concerto get satellite clock Speed Your riding speed Altitude (Unit:m) Local altitude Moved distance (Unit:km) Start from your turn on Concerto to position now MAP electronics co.,ltd. 5

6 Riding Inf. & GPS Inf. Riding Inf. Max. Speed (Unit:km / Hr ) Avg. Speed (Unit:km / Hr ) include rest time Max. Altitude (Unit:m) In you this trace max altitude Total Trip distance (Unit:km) Remaining record points Concerto max record point is and max trace is 99. This number will decrease when your use GPS Inf. Long. / Lat. Use WGS84 system and it is according to position to show NE, NW, SE and SW. Sat. Signal Note Sat. signal is influenced by building or circumstances. Please attend about your environment for a good signal Sat. Number MAP electronics co.,ltd. 6

7 Setting Setting Record On / Off If you turn on trace record function This icon will flash When km/h < 40 10m /1point 40 <= km/h < 50 30m /1point 50 <= km/h < 60 35m /1point 60 <= km/h < 70 40m /1point 70 <= km/h < 80 50m /1point 80 <= km/h < 90 60m /1point 90 <= km/h < m /1point 100 <= km/h < m /1point 110 <= km/h < m /1point 120 <= km/h < m /1point 130 <= km/h < m /1point 140 <= km/h < m /1point 150 <= km/h < m /1point 160 <= km/h < m /1point 170 <= km/h 500m /1point Time zone adj. Backlight On / Off If you turn Off back light When your push any key The back light will turn for 10 sec.. Exit Exit to main page MAP electronics co.,ltd. 7

8 Program Installation--- Driver Installation The install will start when your insert the disk If your computer has not this program please push this bottom for install Install Concerto driver for computer Install Concerto application program for computer Show company information Show about user manual Show about disk information If you can t see above screen page in your insert disk to computer, please select ConcertoCD.EXE in disk for the Software install MAP electronics co.,ltd. 8

9 Program Installation--- Driver Installation Please remove Concerto from your Computer before your install Push device driver bottom For start Concerto driver installation Please connect Concerto to your Computer Push Enter to next step Select Next Select No, not this time Next MAP electronics co.,ltd. 9

10 Program Installation--- Driver Installation Select Select Please remove Concerto from your Computer Please connect again Select USB Link mode and push Enter Concerto driver installed When installation is successfully completed, the icon appears on the screen. MAP electronics co.,ltd. 10

11 Program Installation--- AP Installation Push Application Program bottom to start Concerto application program installation Next Next Concerto Application installed Finish MAP electronics co.,ltd. 11

12 Connection Mode select Connection Mode select Select an icon and push Enter. USB Link Mode GPS Mouse Mode USB Link Mode : Please see page 13 ~ 18 When you select this mode, the icon appears on the screen. GPS Mouse Mode :Please see page 19~20 This function can use in your computer with navigation software When you select this mode, the icon appears on the screen. MAP electronics co.,ltd. 12

13 Application Program introduction Double click Application Program icon This icon in your computer desk top to start program. Concerto not connect to computer Concerto connect to computer MAP electronics co.,ltd. 13

14 Application Program introduction Read Trace Percentage of read When trace data is read completely, this dialog window will show. If you select Yes clear Concerto memory program will If you select No program will keep data in Concerto memory Tools Delete trace by your select Distance setting Update firmware for Concerto. Information MAP electronics co.,ltd. 14

15 Application Program introduction Revise Data Trace name You can rename this trace. Delete trace You can delete your select trace when your push Yes MAP electronics co.,ltd. 15

16 Application Program introduction Start Google earth linking If you want to start it, you must be install Google earth from Google web before POI Name POI Altitude Distance vs before POI POI setting time Push Enter on the main page of Concerto to save a POI. You can input POI names on Trace information - Distance vs Altitude page. Concerto will automatically generate the other information. MAP electronics co.,ltd. 16

17 Application Program introduction Export KML Export your trace data to Google KML file KML can resave your trace in Google mode If you want to see about KML detail function please search by Google Export GPX Export your trace data to GPX file. The GPX file is public format that can share with other GPS application program. For example: The Gpcisync application program can use GPX file to synchronic pictures with GPS data. Import GPX Import other GPX file to application program You can see the trace information from other person when your import MAP electronics co.,ltd. 17

18 Application Program introduction Trace File Open Distance vs Altitude Double click to input POI Name POI information Distance vs Speed Distance vs Time Google Map Export BMP Push this bottom to export BMP directly MAP electronics co.,ltd. 18

19 GPS Mouse mode introduction Step 1. Link your Concerto to Notebook and select GPS mouse mode Step 2. Start your navigation software in your computer and set your COM. port Note : Software Initial COM. Port is number 3 but some time computer maybe setting to or number but you can check in your computer device director please setting to Baud rate 9600 Step 3. Start GPS linking Step 4. Search GPS device MAP electronics co.,ltd. 19

20 G-Mouse mode introduction Step 5. GPS fixed position Step 6. Setting your destination Step 7. Start navigation MAP electronics co.,ltd. 20

21 How to build a photo file in Google earth Step 1 install Google Earth program Down Google Earth program from Google web Step 2 install GPicSync program Down GPicSync program from Google web Step 3 Create a file clipper for photo file and GPX file Step 4 Use application program to export GPX file MAP electronics co.,ltd. 21

22 How to build a photo file in Google earth Step 5 Start GPicSync program Select pictures folder Select GPX file When your files were selected push this bottom Photo file will auto synchronism Photo time and point tolerance Adj. Photo time and point tolerance MAP electronics co.,ltd. 22

23 How to build a photo file in Google earth Step 6 Open doc.kml file Your photo file was finish If you want to transfer your file to other please save as KMZ file MAP electronics co.,ltd. 23