MateCam X1 User Manual

Transcription

1 MateCam X1 User Manual Thank you for using our product! Please read this manual in detail before using this device. Notes: 1. this product is a precision device, please do not drop it, break, splash with liquid, or disassemble without permission. 2. if camera will overheat, smoke or peculiar smell during the process of charging, stop charging immediately and disconnect the camera. 3. please avoid contact with the product for very young children in order to avoid eating or other hazards. 4. use well known branded Micro SD cards, no-name brand cards will not guarantee the normal usage. 5. if not using anymore this device, select a waste collection point to recycle this product or its batteries, do not discard in household garbage. Product overview The MateCam X1 is using latest technology available to offer features like video recording up to 4K-HI resolution, up to 60FPS for FullHD, gyro stabilization, 16MP photo shooting, Wi-Fi and remote control and can be perfectly used in all kinds of outdoor sports video or driving recordings. Chipset Image Sensor Lens Video Resolution Image Resolution Video Format Video FPS FOV Extra features Memory Connections LED Indicator Battery Operating system NOVATEK NT MP 1/2.3'' SONY IMX206 CMOS 7 Glass, F=2.0, 160 Wide Angle lens 4K-HI 3840*2160p 24fps (HI = Horizontally Interpolated from 2880*2160p) 2.7K (2704*1520p 30fps) 2K (2560*1440p 30fps) FullHD (1920*1080p 60fps) HD (1280*720p) 120fps VGA (640*480p) 240fps 16MP/15MP/12MP/8MP/5MP - JPG MOV/MP4 - H.264 with AAC sound 10/15/20/24/25/30/48/50/60/120/240fps Wide / Middle / Narrow Wi-Fi, Gyro Stabilization, Motion Detect, G-Sensor, Power Safe Mode, Remote control (optional) External: Micro SD Card up to 128GB USB2.0 / Wi-Fi / Micro HDMI (HDMI-D) / Remote control / TV Out 9 LEDs mode 900mAh Li-Po rechargeable battery WinXP, Win7, Win10, Mac OS

2 Preparing the camera before first use 1. Charging: the camera is containing a high-capacity rechargeable battery. In order to extend battery life, please charge it completely before using. Charging options: (1) connect to the computer USB interface (2) use the power adapter (5V 1-2A) (3) use the car charger BATTERY LED COLOR CHART: Battery LED colors and LED flashing for battery status When using When charging Green LED on Blue LED on Red LED flashing slowly Red LED flashing fast Red LED on Red LED off Battery is full Battery is at half power Battery nearly runs out (need to charge as soon as possible) Battery runs out (the camera will save the recording automatically before shutting down) The red LED will remain on during charging The red LED will turn off after fully charged (Note: The camera can be used while charging but is better to turn it off while charging in order to extend battery life.) 2. Insert the Micro SD card into the camera Micro SD card capacity and speed is affecting the camera usage. Supports up to 128GB Micro SD cards. Use genuine Micro SD cards, at least Class10 High-Speed Card. 3. Turn on camera Press Power button for 3-5 seconds. (This will turn off the camera if you take this action when camera is on). The camera does a quick self-check, the LED lights will light up in turn to make sure everything is operational, then run back to the default state 2K LED and entering into the stand-by mode. 4. Format Micro SD card Press the Shutter button for 10 seconds in stand-by mode, to format the Micro SD card into FAT32 format. Note: If there is something wrong during operating the camera, please use a pin or other toll smaller than 1 mm diameter to reset the camera and the system will be reset automatically. Function selection Turn the camera on (2K default) and press the Mode button if you want to change the Video Mode. 7 modes are cyclic switched by the blue LED light as: 2K p p -- VGA -- Photo -- Motion Detection -- 4K K. When the desired resolution is selected you can press the Shutter button to start recording. Motion detection function will start automatically. Camera features Action camera When using it outdoor please use the accessories which came with the package to fix the camera safety on the helmet or on other sport equipment. Connect the phone APP to set your preferences then you can use just the camera for video recording or taking photos, for FPV by using its video out feature or installed inside waterproof case when diving or snorkeling and so on. Dash camera Auto start & stop: camera automatically records at default 2K@30fps when power is detected while connecting to the car charger. Parking monitoring function: connect the phone APP and enter into advanced settings Menu, and enable parking monitoring function. When camera is turned off but is detecting a shock or vibration it will automatically turn on and record for 1 minute, then it will automatic shutdown if no more shocks are detected (Power Safe Mode).

3 Live video mode 1. Web Cam mode: turn off camera, press and keep pressed the Mode button and connect the camera to PC by USB cable. The camera will enter in Webcam mode when all LEDs from bottom of the camera are on. No driver is needed. 2. TV Out mode: connect camera to TV or other monitor display by using the RCA cable, turn on the camera. 1) Connect the AV cable between the MateCam Micro USB port and your TV or monitor AV In connectors. 2) Recording: press Mode button to switch between 2K p p -- VGA -- Photo -- Motion Detection -- 4K K. The corresponding indicator LED will light on. Frame rates and other parameters can be set by the APP. Press the Shutter button to start recording / stop recording / photo operation and all action captured by the camera is available on your TV screen. 3) Playback: press Mode button to switch between 2K p p -- VGA -- Photo -- Motion Detection -- 4K -- Playback. When reaching the Playback mode the camera will display Video and Photo folder on TV. Press the Shutter button to select the folder. Press the Power button to enter the folder. You can play the videos one by one, press the Shutter button to play next file, press the Mode button to exit. (When in playback mode, the LED light blinks slowly.) - When the modification is complete, confirmations are displayed. 3. HDMI mode: connect camera to TV or other monitor display by using a Micro HDMI (HDMI-D) cable, turn on the camera. 1) Connect the Micro HDMI-D cable between the MateCam micro HDMI port and your TV or monitor HDMI connector. 2) Preview: choose 2K resolution for focus and monitor. Pressing Mode button will switch between Preview and Playback 3) Playback: when you press the MODE button to switch to the playback state, it will display video and photo folder on TV. Press the shutter button to select the folder. Press the Power button to enter the folder. You can play the videos one by one, press the Shutter button to play next file, press the Mode button to exit. (When in playback mode, the LED light blinks slowly.) - When the modification is complete, confirmations are displayed. Use APP for other settings. Note: Set the camera in video or photo mode. Depending on the current selected mode resolution you can capture pictures within a range of :10M. Wi-Fi Connection 1. Download and install the MateCam APP for Android or ios. The android APP can be downloaded from Google Play and ios APP can be downloaded from App Store. Or scan the QR code from the manual or gift box to download. 2. Press Mode button for 3 seconds to turn Wi-Fi ON/OFF. Wi-Fi blue light on will show you the Wi-Fi camera state. Wi-Fi Name:MateCam_X1_ Default Password: After connecting the Wi-Fi successfully you can enter to advanced settings Menu to reset the Wi-Fi password and the Wi-Fi name. 4. After entering into the APP interface, swipe up and down the screen to adjust display brightness. 5. Function buttons as below photo show: Advanced settings, Motion detecting, Video, Photo, Playback. For example, the below screenshot is for the video mode and when pressing the bottom left button is possible to setup the recording properties. The next screenshot is showing the pictures setup.

4 Video Photo 6. Enter into the preview mode you can view photos, videos. You can download, edit, and share pictures and videos to Facebook, WeChat. etc. 7. More detailed functions for the APP can be found on the website, just download the APP online manual. Product specifications may be changed according to the product upgrading or improving, please look online for the actual product specifications.

5 感谢您选择我们的产品! 在使用之前, 请详细阅读使用说明书 注意事项 6. 本产品为精密仪器, 请勿摔砸 碰撞, 或私自拆卸本产品 7. 如在充电过程中出现产品过热 冒烟或产生异味, 请立即拔出充电装置, 停止充电 8. 请避免让幼儿接触本产品, 以免发生误食或其它危险 9. 请选择正规品牌的 microsd 卡, 非正规品牌的卡不能确保正常使用 10. 请选择正式回收点回收本产品或其电池, 切勿弃置于生活垃圾中 产品概述 MateCam X1 相机主要功能包括高清数字视频拍摄和高清相片拍摄, 可实现 wifi 无线遥控, 可完美的应用于各种户外运动摄录或行车记录 芯片 NOVATEK96660 图像传感器 1/2.3'' 16M Color Sensor SONY IMX206 镜头 7 Glass, F= Wide-angle lens 视频解析度 4K-HI 2880* fps 插值 2.7KP 2704* fps 1080P 1920* fps 720P 1280* fps VGA 640* fps 图片分辨率 16MP /15MP/12MP/8MP/5MP JPG 视频格式 H.264 MOV // MP4 视频帧率 视角 10/15/20/24/25/30/48/50/60/120/240fps 宽 / 中 / 窄 额外的功能 Wi-Fi, 陀螺仪, 移动侦测, 重力感应器, 遥控 ( 可选 ) 内存接口 LED 灯指示电池系统 External: MicroSD card up to 128GB USB2.0 / Wi-Fi / HDMI-D / 遥控器 / 视频输出 9 LED mode 900mA Li-Polymer rechargeable battery WinXP,Win7,Win10,Mac OS

6 安装方式 使用操作一 首次使用前的准备工作 1 充电本机内置大容量充电电池 为延长电池使用寿命, 使用本机前, 建议对电池进行完全充电 充电方式 :(1) 连接电脑 USB 接口 ;(2) 使用电源适配器 (5v 1-2A);(3) 使用车载充电器 充电时, 电量指示灯为红色长亮, 充满后熄灭 使用时, 电量指示灯根据电量多少呈现不同颜色, 绿色表示电量充足, 蓝色表示电量剩余 50%, 红色慢闪表示电量即将耗尽 需尽快充电, 红色快闪表示电量耗尽 将在自动保存文件后关机 ( 注 : 充电时, 本机录像功能可正常使用 为了保护电池, 建议尽量在关机状态下充电 ) 2 插入 Micro SD 卡 Micro SD 卡的容量及传输速率直接影响本机的实际使用效果 请选择正品 Micro SD 卡 ( 传输速率 class10 及以上, 容量最高支持 128G) 无卡及卡满时, 当前模式的 LED 将快闪提示 3 开机长按电源键 3-5 秒 ( 开机状态下执行本操作将关闭本机 ), 模式指示灯依次点亮后停留在 2k 上长亮, 进入待机状态 4 格式化 Micro SD 卡待机状态下长按快门键 10 秒, 本机将自动将 Micro SD 卡格式化为 FAT32 格式 注 : 若本机在使用过程中出现异常情况, 请用直径小于 1mm 的细棒按压复位键, 系统会自动复位 二 功能选择开机后默认为 2K 录像功能 按动模式键, 可选择 2K 录像 1080P 录像 720P 录像 VGA 录像 拍照 移动侦测 4K 录像功能 选定功能后, 按快门键即可启动所选择的功能 ( 移动侦测为自动启动 ) 三 主要用途 ( 一 ) 运动 dv 使用者在户外运动时, 使用本机附带的配件将本机固定在安全头盔或运动器材上, 再连接手机 app 设置好参数后, 可进行第一视觉的运动题材拍摄 或用于无人机航拍, 以及安装于防水壳内进行潜水时的水下拍摄等等 ( 二 ) 行车记录仪连接车载充电器后, 汽车启动时机器会自动开机录像, 默认录像分辨率是 2K@30fps 停车监控功能 : 连接手机 APP 进入高级设置菜单, 打开停车监控功能设置, 机器可以在关机状态下检测震动自动开机录像 1 分钟, 然后自动关机 ( 三 ) 摄像头 1 连接电脑: 在关机状态下, 长按模式键并用 USB 数据线连接到电脑,( 删 ) 同时按一下电源键开机, 机器进入摄像头模式, 电脑不用安装驱动程序 2 连接电视: 用电视线连接到机器及电视或者其他监控显示器, 开启机器 TV 模式 : 1)Prievew: 按一次模式键进行模式切换,2K P-- 720P-- VGA-- 拍照-- 移动侦测-- 4K-- PLAY BACK-- 循环切换, 同时相应 LED 点亮 ( 分辨率等其他参数设置按 APP 设置为准, 没设置就按默认值 ), 按快门键可以开始录像 / 停止录像 / 拍照操作 2)Play back: 当按模式键切换到回放状态后在 TV 上显示 viedo 及 JPG 文件夹, 按快门键选择文件夹, 按电源键进入文件, 进入视频文件夹后自动顺序播放视频文件, 按快门键播放下一 段, 按模式键退出 ( 机子在回放模式下用 4K-2K-1080P-720P-VGA LED 循环慢跑动作显示 ) --- 修改完成, 请确认 UI 显示 3 连接高清设备 : 用高清线连接到机器及电视或者其他监控显示器, 开启机器 HDMI 模式 : 1)Prievew: 做 2K 分辨率, 调焦和监控使用 ( 按模式键可以切换 Prievew/Play back) 2)Play back: 进入回放状态后在 TV 上显示 viedo 及 JPG 文件夹, 按快门键选择文件夹, 按电源键进入文件, 进入视频文件夹后自动顺序播放视频文件, 按快门键播放下一段, 按模式键 退出 ( 机子在回放模式下用 4K-2K-1080P-720P-VGA LED 循环慢跑动作显示 ) ( 四 ) 遥控抓拍

7 注 : 本机在录像或拍照模式下, 可通过遥控器抓拍当前模式设置下分辨率值的照片 遥控器有效范围 :10M 四 WiFi 连接 Wi-Fi 连接 : 1 安装 APP 软件 MateCam 到安卓或者苹果系统设备中, 安卓 APP 可以在 Google Play 下载, 苹果 APP 可以在 App store 下载, 或者直接扫描说明书上的二维码进行下载 2 长按模式键 3 秒 WIFI ON/OFF, 对应 WIFI 蓝色灯亮, Wifi 名称 :MateCam_x1, 密码默认 Wi-Fi 连接成功后可以进入高级设置菜单进行 WIFI 密码及 WIFI 名称重新设置 4 进入 APP 界面后上下滑动屏幕可以调节显示屏亮度 5 如图所示功能按钮, 分别是高级设置, 移动侦测, 录像, 拍照, 预览功能按钮, 选中当前模式后对应的按钮会变为黄色框住, 如下图为录像中, 同时机器对应的模式 LED 点亮慢闪 录像模式 拍照模式 6: 不同模式下可以点击当前设置按钮进入子菜单设置 7: 进入预览模式下可以在线预览照片, 视频 下载, 编辑, 分享图片及视频到微信,QQ, 脸书等 8: 详细 APP 功能菜单请进入官网下载 APP 电子档说明书 9: 产品规格可能会随产品升级或更新而改变, 请按实际产品规格为准 产品规格可能会随产品升级或更新而改变, 请以实际产品的规格为准