TPM Operation Manual

Transcription

1 Revision 1.1 July 17, 2017 TPM Operation Manual Parameter setting, monitoring and auto data memory for MDC & ADC N 11th St - San Jose CA

2 Index 1. Main feature 3 2. Specification 3 3. Operation Connection Menu Standard menu Setting menu 7 1) Extended 99 pesets 7 2) Extended 99 models 8 3) Communication 9 4) Barcode 11 5) I/O Layout drawing Data memory in SD card Firmware & UI graphic file upgrade N 11th St - San Jose CA

3 1. Main features - Parameter setting & monitoring same as ParaMon PC software - Extended 99 Presets and Models - Data auto saving in file system. One file a day / monthly folder, yearly folder - Barcode scanner available to call preset or model - Available for MDC or ADC ( two models ) - 8 TFT LCD with touch screen 2. Specification Item Description Remark Power supply AC V~ 50/60Hz, 1.5A AC-DC adapter SW24 Input power Size Weight DC24V, 1A 207(W) 160 (H) 52 (D) 1.2 Kg Display COM port Digital I/O 8 TFT LCD with touch screen 2 - RS232C (MDC & Barcode scanner) 2 - RS422 (ADC IN & OUT) 1 - USB 1 - Ethernet 8 - Inputs 6 - Outputs Program Memory 99 - extended Presets 99 - extended Models ** Preset, screw number, I/O & time managing in 10 step process 8 GB SD card. Auto fastening data saving. Auto file and folder creating Programs are saved in ParaMon Touch One file a day. Monthly and yearly folder ** Standard packing ** 1 x ParaMon Touch, 1 x 24VDC adapter N 11th St - San Jose CA

4 3. Operation 3.1 Connection ParaMon Touch is connected to MDC or ADC controller as below. MDC controller : Serial RS232C ADC drive : Serial RS422 The COM port connection requires the information about COM port, Baud rate and the device ID ParaMon Touch - MDC ParaMon Touch - ADC 24V DC, 1A Ethernet SD memory card RS422 (ADC) RS422 (Not used) 2 X RS422 2 X RS232 Mini USB No use I/O RS232C-1 (MDC) RS232C-2 (Scanner) N 11th St - San Jose CA

5 2 X RS422 2 X RS232 ADC Spindle drive RS232C MDC RS232C Scanner switchable 2 x RS232 2 x RS422 There are two RS232C ports on the back side of ParaMon Touch. # RS232C-1 : Labeled as SENSOR. It is connected to the MDC controller To activate RS232C-1 port, select RS232 on Communication1 menu # RS232C-2 : Labeled as RS232. It is connected to the barcode scanner To activate RS232C-2 port, select RS232 on Communication2 menu There are two RS422 ports on the side of ParaMon Touch. # RS422-1 : Labeled as DR1. It is connected to the ADC controller To activate RS232C-1 port, select RS232 on Communication1 menu # RS422-2 : Labeled as DR2. Not used To activate RS232C-2 port, select RS422 on Communication2 menu N 11th St - San Jose CA

6 3.2 Menu There are 2 group of menu. Standard MD parameter setting & monitoring 1. Extended 99 Presets 2. Extended 99 Models 3. Barcode scanner setting 4. Auto data saving on SD card 5. ParaMon Touch I/O Standard menu Parameter, Monitoring & Remote Use the operation manual of MDC or ADC N 11th St - San Jose CA

7 3.2.2 Setting Menu 1) Extended 99 presets There are total 99 presets with 15 standard parameter settings. These presets are saved in ParaMon Touch itself, not in the MDC controller. Whenever the preset is selected from 99 presets, it replaces parameters on the Preset #1 of the MDC controller via RS232C. Click to select the number of preset The extended Preset menu is effective only with two parameter settings below Setting > Mode : Preset / Extended setting enable : YES N 11th St - San Jose CA

8 2) Extended 99 Models There are total 99 models with 10 standard steps. These models are saved in ParaMon Touch itself, not in the MDC controller. Whenever the Model is selected from 99 models, it replaces settings on the Model #1 of the MDC controller via RS232C. Click to select the number of Model The extended Preset menu is effective only with two parameter settings below Setting > Mode : Model / Extended setting enable : YES N 11th St - San Jose CA

9 3) Communication The communication menu manages two RS232C & RS422 ports. One works for connecting to MDC or ADC controller (DR1 & SESNOR). The other works for Barcode scanner or any other device ( DR2 & RS232 ) 2 X RS422 2 X RS232 Communication 1 > Type : RS232 for MDC (labeled SENSOR) or RS422 for ADC (labeled DR1) N 11th St - San Jose CA

10 2 X RS422 2 X RS232 Communication 2 > Enable : YES / Type : RS232 or RS422 To connect the RS232 Barcode scanner, select type RS232. And select the same baudrate with the barcode scanner. To connect the RS422 barcode scanner, select type RS422 and ID number N 11th St - San Jose CA

11 4) Barcode Once Communication 2 was done with proper setting for the connected barcode scanner, Barcode menu is available to be programed Click to select the number of preset 1) Key in the Preset or Model number to be selected 2) Key in the barcode data address 3) Click READ and scan the barcode 4) Select the digit number for starting and ending from the read data Barcode data : P X C H A ( example ) Digit number Start : 5 End : 7 Selected data : N 11th St - San Jose CA

12 5) I/O setting There are 8 inputs and 6 outputs. Pin No Description Factory setting 1 IN 1 Preset / Model #1 2 IN 2 Preset / Model #2 3 IN 3 Preset / Model #3 4 IN 4 Preset / Model #4 5 IN 5 Preset / Model #5 6 IN 6 Preset / Model #6 7 IN 7 Preset / Model #7 8 IN 8-9 X 10 OUT 1 Ready 11 OUT 2 Alarm 12 OUT 3-13 OUT 4-14 OUT 5-15 OUT 6-16 X 17 X 18 X 19 X 20 X 21 Out COM 22 In COM 23 X 24 X 25 X N 11th St - San Jose CA

13 25P I/O schematic 25P D-Sub connector 24V Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 22 Input #1 Input #2 Input #3 Input #4 Input #5 Input #6 Input #7 Input #8 Input com 24V 100mA max. Output #1 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 21 Output #2 Output #3 Output #4 Output #5 Output #6 Output com N 11th St - San Jose CA

14 N 11th St - San Jose CA

15 4. Layout drawing 6 - M3, 6mm depth hole for mounting N 11th St - San Jose CA

16 5. Data memory in SD card All fastening data is automatically saved in the SD card. To read the saved data, remove the SD card and read them in the PC. The SD card have the following folder and file system SD card > History > 2017 (year) > 07 (month) > 17.csv ( file name with the number of date ) 6. Firmware & UI graphic file update [ Firmware upgrade ] Make folder name of update on the root of the SD card. Copy the firmware file into the update folder. Power ON the ParaMon Touch after inserting of SD card. Then the system will detect the update folder and start updating the firmware automatically SD card > update > MD_ParaMonTouch.bin ( firmware file for MDC ) AD_ParaMonTouch.bin ( firmware file for ADC ) N 11th St - San Jose CA

17 [ UI graphic file upgrade ] Save all the graphic files into the following folder name in SD card. Folder name : DWIN_SET Open the top frame of the ParaMon Touch by loosening 3 screws on top And two screws on both top side. Power ON the ParaMon Touch after inserting of SD card. Then the system will detect the UI graphic folder and start upgrading the graphic files automatically. After upgrading the files, Power OFF and remove the SD card. SD card > DWIN_SET > Jpg files N 11th St - San Jose CA

18 N 11th St - San Jose CA