SR 1280 / SD 477x Epoxy Resin Systems
|
|
- Walter Simmons
- 5 years ago
- Views:
Transcription
1 SD 477x Page 1 / 1 Epoxy resin SR 128 : Epoxy matrix Without classified Toxic products (T) SD 477x Epoxy Resin Systems Hardeners SD 477x: Without classified Toxic products (T) SD 4775 : Intermediate, medium hardener SD 4773 : SD 4772 / 4771 / 477 : Very / Ultra / Mega slow hardener Profile: Cure at ambiant temperature and post cure at 4 to 1 Applications: Hand laminating, infusion, adhesive, tooling, casting, laminates Epoxy Resin SR 128 : Appearance Color Gardner color Chemical nature Storage Viscous liquid Clear 3 maximum Epoxy resin. Reaction product between bisphénol and epichlorhydrine. Can crystallize at low temperature or after a long storage. Shelf life : Color Clear to yellow, Gardner < 3 Density Viscosities (m.pas Refractive index
2 SD 477x Page 2 / 1 Base Hardeners SD 477x: Aspect / Color SD 4775 SD 4773 SD 4772 SD 4771 SD 477 Liquid / Clear to yellow Gardner color maximum Reactivity levels Medium Standard Very slow Ultra slow Mega slow Viscosities (m.pas Density (g/cm Refractive index SD 47x Mixes : SD 4775 SD 4773 SD 4772 SD 4771 SD 477 Mixing ratio: Quantity by weigh 1 g / 27 g Quantity by volume 1 ml / 31 ml 1 ml / 32 ml 1 ml / 33 ml Or 3 / 1 Viscosities (m.pas Tests carried out in accordance with the following norms: Gardner Color : NF EN ISO 463 Visual method Refractive Index : NF ISO 28 Determination of viscosities : NF EN ISO 3219 Rheometer 5 mm shear rate1s -1 Density : NF EN ISO Pyknometer method
3 SD 477x Page 3 / 1 Reactivities on 5 g Mix SD 47x : Exothermic temperature () 4 SD SD SD SD SR 128 SD Time taken to achieve exotherm hrs hrs 25 1 hrs hrs 5 2 hrs 15 1 hr 2 1 hrs 25 3 hrs 1 hrs 2 Time taken to reach hrs hrs hrs 1 hrs hrs 2 hrs 2 45 Pot Life SD 4775 SD 4773 Temperature ( ) SD 4772 SD 4771 SD Time ( hrs )
4 SD 477x Page 4 / 1 Pot Life 5 3 Temperature ( ) SD 4775 SD 4773 SD 4772 SD 4771 SD Time ( hrs ) Pot Life SD 4775 Temperature ( ) SD 4773 SD 4772 SD 4771 SD Time ( minute )
5 SD 477x Page 5 / 1 Reactivity 1 mm film viscosity evolution with the temperature SD 5, 6 and 7 (Hot process) 1 6 cp η min 45 T ime t SD 5 SD 6 SD 7 SD cp η h 24 Time t SD 2 SD 2 SD 2 SD 2 SD 2
6 SD SD 477x Page 6 / 1 cp η h 13 Time t SD 3 SD 3 SD cp SD 3 SD 3 SD 3 η ,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 h 7 Time t SD 4 SD 4 SD 4 SD 4 SD 4
7 SD 477x Page 7 / 1
8 SD 477x Page 8 / 1 Mechanical Properties Of Pure Resin Systems SD 4775 SD 4773 Cure 24 hrs 4 8 hrs 6 4 hrs 8 24 hrs 4 2 hrs 5 8 hrs 6 4 hrs 8 Tension Modulus of elasticity N/mm² Maximum resistance N/mm² Resistance at break Elongation at max. resistance % Elongation at break % Flexion Modulus of elasticity N/mm² Maximum resistance N/mm² Elongation at max. resistance % Shear strengh N/mm² Compression Compressive yield strength Offset compressive yield N/mm² % Charpy impact strength Resilience KJ/m² Glass Transition Tg 1 Onset Tg 1 Onset maximum
9 SD 477x Page 9 / 1 Mechanical Properties Of Pure Resin Systems SD 4772 Cure 24 hrs 4 2 hrs 5 16 hrs 6 8 hrs 8 Tension Modulus of elasticity N/mm² Maximum resistance N/mm² Resistance at break Elongation at max. resistance % Elongation at break % Flexion Modulus of elasticity N/mm² Maximum resistance N/mm² Elongation at max. resistance % Shear strengh N/mm² Compression Compressive yield strength Offset compressive yield N/mm² % Charpy impact strength Resilience KJ/m² Glass Transition Tg 1 Onset Tg 1 Onset maximum
10 SD 477x Page 1 / 1 Systems SD 4771 SD 477 Cure 24 hrs 4 8 hrs 6 8 hrs 8 24 hrs 4 16 hrs 6 8 hrs 8 Tension Modulus of elasticity N/mm² Maximum resistance N/mm² Resistance at break Elongation at max. resistance % Elongation at break % Flexion Modulus of elasticity N/mm² Maximum resistance N/mm² Elongation at max. resistance % Shear strengh N/mm² Compression Compressive yield strength Offset compressive yield N/mm² % Charpy impact strength Resilience KJ/m² Glass Transition Tg 1 Onset Tg 1 Onset maximum Tests carried out on samples of pure cast resin, without prior degassing, between steel plates. Measures undertaken according to the following norms : Tension: NF T Flexion : NF T 51-1 Compression NF T Shear strength by Punch Tool ASTM D Charpy impact strength: NF T Glass transition DSC : ISO : to 18 under nitrogen gaz Tg1 or Onset : 1st point at 2 /mn Tg1 maximum or Onset : second passage
TERALINK TM A cross-linked thermoplastic polymer for Optical Components that can withstand SMT processes
TERALINK TM A cross-linked thermoplastic polymer for Optical Components that can withstand SMT processes Sumitomo Electric Fine Polymer, Inc. Innovation Core SEI, Inc. (ICS) Sumitomo Electric Industries,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK (part of and Smithers Pira Ltd) Shawbury Shrewsbury Shropshire SY4 4NR Contact: Kenn Amabilino Tel: +44 (0)1939 250383 Fax: +44 (0)1939 251118
More informationFAIR Meeting 11 th October 2006 Daresbury Laboratory
FAIR Meeting 11 th October 2006 Daresbury Laboratory Magnet Insulation materials for FAIR: Dynamic Mechanical Analysis and High- Speed Differential Scanning Calorimetry of glass-epoxy before and after
More informationTechnical keys to understand 3D-printing. Lucile BONHOURE. Sartomer, Arkema
RTE Conference & Exhibition 2017 Technical keys to understand 3D-printing Lucile BONHOURE Sartomer, Arkema Prague, October 19th, 2017 Agenda Introduction to 3D-Printing, stakes and technical challenges
More informationPVC-U plastic sheets always set a good example
printing. lacquering. filming. PVC-U plastic sheets always set a good example Trade information for: Decorators Advertising technicians Digital printers Design & advertising agencies Exhibitors Exhibition
More informationPVC-U plastic sheets always set a good example
printing. lacquering. filming. PVC-U plastic sheets always set a good example Trade information for: Decorators Advertising technicians Digital printers Design & advertising agencies Exhibitors Exhibition
More informationPortable Density and Concentration Meter DMA 35
Portable Density and Concentration Meter DMA 35 More than 50 years of experience in your hand DMA 35 is your portable digital meter for determining density, specific gravity, and concentration directly
More informationINNOVATIONS IN 3D PRINTING MATERIALS FOR ADDITIVE MANUFACTURING. Dr Mike J Idacavage, Amelia Davenport and Dr Neil Cramer
INNOVATIONS IN 3D PRINTING MATERIALS FOR ADDITIVE MANUFACTURING Dr Mike J Idacavage, Amelia Davenport and Dr Neil Cramer Introduction Prototyping Targeted Performance Properties Improve the dimensional
More informationDynamic Mechanical Analyzer MCR 702
Dynamic Mechanical Analyzer MCR 702 DMA and more The world s most versatile platform for dynamic mechanical characterization MCR 702 is the most versatile and powerful platform on the market for the dynamic
More informationProperties of Photocurable Resins Used in a Process of Rapid Prototyping Components of Aircraft Structures
Machine Dynamics Research 2016, Vol. 40, No 3, 25-39 Properties of Photocurable Resins Used in a Process of Rapid Prototyping Components of Aircraft Structures Jacek Bernaczek *, Grzegorz Budzik, Mariusz
More informationbar Round (303S31) Round (303S31) Bright Drawn H9 Dia (in) Weight/m (Kg) Weight/m (Kg) Dia (in) 20mm
A World of Metal bar mm mm mm mm mm 7mm mm 9mm 0mm 0.0 0.0 0.0 0.0 0. 0. 0.9 0. 0. 0.0 0. 0.9 0.0 0.0 0. 0. 0.7 mm mm mm mm mm 7mm mm 0mm mm mm mm 0.9 0.99.0...9.7..00..7.9.0...0 (0S) Bright Drawn H9
More informationCompany Profile. Page 1 of 17
Company Profile Introduction Wire Technology is part of an established international group with a reputation for high quality insulated copper and aluminium products on very short lead times. We provide
More informationUltrapipe. Innova've glass fabric solu'ons for the global CIPP industry delivering enhanced UV- curing performance - status update.
Ultrapipe Innova've glass fabric solu'ons for the global CIPP industry delivering enhanced UV- curing performance - status update. Kees den Besten Programme Manager CIPP OWENS CORNING Glass liners pros
More informationISO INTERNATIONAL STANDARD. Plastics Determination of dynamic mechanical properties Part 2: Torsion-pendulum method
INTERNATIONAL STANDARD ISO 6721-2 Second edition 2008-06-01 Plastics Determination of dynamic mechanical properties Part 2: Torsion-pendulum method Plastiques Détermination des propriétés mécaniques dynamiques
More informationTechnical Data Sheet DiPaMat TM Legend Ink FWh01. UV curable white inkjet ink for flexible legend printing. October 2017.
Technical Data Sheet DiPaMat TM Legend Ink FWh01 UV curable white inkjet ink for flexible legend printing October 2017 PRODUCT overview Description DiPaMat TM Legend FWh01 DiPaMat TM Cleaning Solution
More informationVALIDATION OF THE AUTOMATIC MOUNTING OF 3D PLUS MEMORY STACKS ON PCB FOR HIGH LEVEL OF VIBRATIONS
VALIDATION OF THE AUTOMATIC MOUNTING OF 3D PLUS MEMORY STACKS ON PCB FOR HIGH LEVEL OF VIBRATIONS Doc.No.: 3300-1303 Issue: 1 Date: 04.13.2005 Writer: Nicolas Villégier 3D PLUS Process Engineer Project
More informationApril 27, :38 9in x 6in B-741 b741-ch13 FA
CHAPTER 13 Inkjet 3D Printing Eduardo Napadensky Objet Geometries Ltd., Israel INTRODUCTION Inkjet three-dimensional (3D) Printing is a fast, flexible and cost effective technology which enables the construction
More informationMOLEX COPPER FLEXIBLE CIRCUIT SOLUTIONS
MOLEX COPPER FLEXIBLE CIRCUIT SOLUTIONS CIRCUITS DESIGNED WITH A RANGE OF CAPABILITIES Maximum Performance for Demanding Applications Flex and Rigid Flex (Typical) Layer Count 1 to 8 Layers Standard Panel
More informationDispersers. designed. to work perfectly
Dispersers designed to work perfectly 1 T-series Innovative solutions for dispersion technology T-series range of dispersers are designed for mixing and dispersing of products with a wide range of viscosities.
More informationOptimization of UV Curable Inkjet Ink Properties for Jet Stability Sara Edison Hexion Specialty Chemical Cincinnati, OH USA
Optimization of UV Curable Inkjet Ink Properties for Jet Stability Sara Edison Hexion Specialty Chemical Cincinnati, OH USA Abstract UV-curable inkjet inks are rapidly gaining in popularity due to their
More informationPictograms of he table heads. Pictograms of the technical data
Pictograms of he table heads Shrinking tube for cable cord Outer jacket covering tube Main Side t Hardening time ml Volume Water uptake ( 42 days at 50 C) Terminal capacity 3 Three wires m Weight Pictograms
More informationUser Com. Thermal Analysis. Choosing the right baseline. Information for Users. Dear Customer, Contents 1/2007. Introduction
Thermal Analysis Information for Users 25 User Com Dear Customer, We are very pleased to receive more and more articles from you for publication in UserCom. Thanks to new techniques and better performance,
More informationOperating Instruction
Level and Pressure Operating Instruction VEGASWING 71 A Contents Contents Safety information... 2 1 Product description 1.1 Function and configuration... 3 1.2 Functional principle... 3 1.3 Technical data...
More informationTesting Equipment Product Catalogue
Testing Equipment Product Catalogue Our Company We are a newly established business, developing, manufacturing and trading laboratory testing instruments for paper, board, tissue, and pulp. Our members
More informationP CP1 MTL Overview of analyses
Overview of structural load and analysis cases in the CP1 MTL - engineering assessment Design Document Document Nr. : D0275384 Version / Revision : 0 / C Status : External check Created on : 28-06-2018
More informationInk testing for industrial printers
Ink testing for industrial printers Dr. Simon Daplyn IMI Europe Tech Talks InPrint Industrial Print Show 2017 Presentation outline 1. Ink design 2. Ink testing strategy 3. Typical test equipment 4. It
More informationAR2008 Digital Abbe Refractometer
AR2008 Digital Abbe Refractometer Determination of mixing ratios, quality and quantity inspection in the following industries: The AR2008 Digital Abbe Refractometer features electronic data evaluation.
More informationSlot Resistance Thermometers
Slot Resistance Thermometers www.ephy-mess.de Contents 1. Slot Resistance Thermometer (NWT) 2 bifilar and chip type design 1.1 EPHY-MESS NWT delivery program list 2 1.2 Slot resistance thermometer with
More informationProduct Information. LIC 4119 Absolute Linear Encoder for Safety-Related Applications
Product Information LIC 4119 bsolute Linear Encoder for Safety-Related pplications 11/2018 LIC 4119 bsolute linear encoder with high accuracy for safety-related applications For measuring steps down to
More informationCHAPTER 4 INCREASING SPUR GEAR TOOTH STRENGTH BY PROFILE MODIFICATION
68 CHAPTER 4 INCREASING SPUR GEAR TOOTH STRENGTH BY PROFILE MODIFICATION 4.1 INTRODUCTION There is a demand for the gears with higher load carrying capacity and increased fatigue life. Researchers in the
More informationDial Reading Viscometer
The World Standard Brookfield Viscometers 12 Dial Reading Viscometer with Electronic Drive Electronic Drive Means Quiet, Reliable Operation T: 0544-276385 F: 0544-404727 WWW.TECNOPOUND.IT MODEL LVT RVT
More informationRESTRICTED WORLD TRADE G/IT/SPEC/8/Rev.1 23 February 1998 ORGANIZATION PROPOSED ADDITIONS TO PRODUCT COVERAGE. Submission by Australia.
RESTRICTED WORLD TRADE G/IT/SPEC/8/Rev.1 23 February 1998 ORGANIZATION (98-0664) Committee of Participants on the Expansion of Trade in Information Technology Products Original: English PROPOSED ADDITIONS
More informationWhat is Light? What is Electromagnetic Radiation?
What is Light? Light is a form of electromagnetic radiation that can be seen by the eye. What is Electromagnetic Radiation? Electromagnetic radiation is a term used to describe waves that are created by
More informationSelection can be made from different capacities (ranging from 100kN to 2000kN) from HL 590 / HL590 (FL) series or HLC 591 / HLC 591 (FL) series.
Universal Testing Machines UNIVERSAL TESTING MACHINE HEICO UTM is suitable to conduct following tests - (i) Compression (ii) Tension (iii) Transverse (iv)bending (v) Shear (vi) Hardness and many others
More informationProcessing Aids for Viton
Technical Information Processing Aids for Viton Introduction VPA No. 1 is a general-purpose processing aid useful in all types of molded goods made from Viton. It provides smooth preforms, slightly faster
More informationMaterial technology enhances the density and the productivity of the package
Material technology enhances the density and the productivity of the package May 31, 2018 Toshihisa Nonaka, Ph D. Packaging Solution Center Advanced Performance Materials Business Headquarter Hitachi Chemical
More informationUNIVERSAL TESTING MACHINE
Universal Testing Machines UNIVERSAL TESTING MACHINE HEICO UTM is suitable to conduct following tests (i) Compression (ii) Tension (iii) Transverse (iv)bending (v) Shear (vi) Hardness and many others on
More informationGloss, reactivity and adhesion
UV Coatings , reactivity and adhesion Terra UV coatings provide finishing on the highest level, protect the printed product perfectly and enable a smooth further processing. UV coatings cure under ultraviolet
More informationE4PA. Ultrasonic Displacement Sensor. Ordering Information
Ultrasonic Displacement Sensor Ideal for controlling liquid level. Long sensing distance and high-resolution analog output. High-precision detection with a wide range of measurements Four types of Sensors
More informationPrecision Universal Tester Autograph AGS-X Series C224-E057A
Precision Universal Tester Autograph AGS-X Series C224-E057A Autograph AGS-X Series PRACTICAL TESTING SOLUTIONS 10 kn 20 kn 50 kn The Shimadzu Autograph AGS-X series provides superior performance and practical
More informationSimulation of TEST DAVIT
Phone: 616-834-4175 WWW.SKYLINEFP.COM Simulation of TEST DAVIT Date: Friday, February 19, 2016 Designer: Study name: Study 1 Analysis type: Static Description No Data Table of Contents Description... 1
More informationN59111 Polyurethane Anti-Static Coating Type I
Polyurethane Anti-Static Coating Type I TECHNICAL DATA SHEET Product Description Components Specifications is a two pack polyurethane coating, designed to enable the discharge of static electricity from
More information20MnV6 / E470 Seamless tubes
EXPORT 20MnV6 / E470 Seamless tubes for the machining industry ODS It s no wonder with our wealth of experience, product and market knowledge we play a leading role in the Netherlands as stockholder of
More informationMSC/PATRAN LAMINATE MODELER COURSE PAT 325 Workbook
MSC/PATRAN LAMINATE MODELER COURSE PAT 325 Workbook P3*V8.0*Z*Z*Z*SM-PAT325-WBK - 1 - - 2 - Table of Contents Page 1 Composite Model of Loaded Flat Plate 2 Failure Criteria for Flat Plate 3 Making Plies
More informationGLOBAL CONNECTIONS PLC.
HMC Polymers http://www.hmcpolymers.com/products/ep546t Page 1 of 1 27/12/2556 Moplen EP546T High flow, high crystalline polypropylene impact copolymer resin Features Superior stiffness Good stiffness/impact
More informationep2 + GaugeSafe Materials Testing System System Brochure
System Brochure A standalone presettable controller that simplifies materials and product testing. The ep2 Digital Controller performs mechanical tests on materials, products and components. It is a presettable
More informationAnalysis of ANSI W W 6x9-118,
Page 1 of 8 Analysis of ANSI W W 6x9-118,110236220472 Author: Analysis Created: Analysis Last Modified: Report Created: Introduction Administrator, 08:29:09, 08:29:09 09:26:02 Database: Z:\ENGENHARIA\ESTUDOS
More informationTechnical. Recommended Compression and Tension. ISO/IEC / ANSI/NCSLI Z540.3 Accredited.
ISO/IEC 17025 / ANSI/NCSLI Z540.3 Accredited Technical Paper Recommended Compression and Tension Adapters for P: (717) 843-0081 F: (717) 846-4193 info@mhforce.com Figure 1: Bent Rod End Not using the proper
More informationSupporting Information
Supporting Information Chameleon-Inspired Mechanochromic Photonic Films Composed of Nonclose-Packed Colloidal Arrays Gun Ho Lee, Tae Min Choi, Bomi Kim, Sang Hoon Han, Jung Min Lee, and Shin-Hyun Kim *,
More informationSimulation of Connector Assembly C
Simulation of Connector Assembly C Date: Sunday, March 6, 2016 Designer: Solidworks Study name: Horizontal Stress Test on C inner bend Analysis type: Static Table of Contents Model Information... 2 Study
More information3S 1 13,5 1/4 3013, /8 1/ ,2 3/8 3017, / ,3 1/2 4021,3
DIN 3015, Part 2 Components: Dimensions / Order Codes Clamp Body ød1 S 1 Clamp Body One clamp body is consisting of two clamp halves. Colour: reen Material code: PP Colour: Black Material code: PA (87
More informationAssembly. 1 Compact version with valve plug 2 Short tube version with cable 3 Compact version with M12 plug 4 Short tube version with M12 plug
Vibration Limit Switch Features Limit switch for liquids External function test with test magnet Onsite function check possible thanks to LED indication Large selection of process connections for hassle-free
More informationThese are typical values for unprocessed product. Processing may change the values.
Product Description Product Bulletin 8518/8519/8520/8914/8915/8528 - Release A, August 2015 PRODUCT DATA SHEET 8518, 8519, 8520: resists fuel vapors, highly conformable 8518: provides wet paint look 8914:
More informationIn-house based 1on OIML- R kg to 20 kg 10 kg to 20 kg
MASS BALANCE: Mechanical, Electronic VOLUME DENSITY Condition: On-site charge equipment 500.- but minimum charge 1000.- Analytical balance 0 mg to 200 g readability 0.0001 g 1 mg to 200 g CSIRO 3,000.-
More informationLaboratory Indian Rubber Manufacturers Research Association, Plot No.-254/ 1 B, Road No. 16V, Wagle Industrial Estate, Thane, Maharashtra
Last Amended on - Page 1 of 21 I. PLASTIC, RUBBER & LEATHER 1. Raw rubber/ Ingredients/ Compound/ Products Mooney Viscosity Mooney Scorch Vulcanisation Properties by Rheometer ASTM D-1646-07, IS 3660(13)/2013,
More informationVane wheel probe BFA25 for flow measurement of gases and liquids with integrated, configurable transducer UFA in Ex-d housing
Vane wheel probe BFA25 for flow measurement of gases and liquids with egrated, configurable transducer UFA in Ex-d housing Drawing 5 Vane wheel flow probe BFA25 (Dimensions see Page 3) Measurable variables
More informationSimulation of Connector Assembly AA
Simulation of Connector Assembly AA Date: Tuesday, March 1, 2016 Designer: Solidworks Study name: Horizontal Stress in AA inner tab fold Analysis type: Static Table of Contents Model Information... 2 Study
More informationExperimental Evaluation and Consideration of Numerical Method of Zanchor CFRP Laminates
Experimental Evaluation and Consideration of Numerical Method of Zanchor CFRP Laminates Yuichiro Aoki, Yosuke Nagao, Takashi Ishikawa Advanced Composite Technology Center, Japan Aerospace Exploration Agency
More information100Q Universal Test System
100Q Universal Test System Mechanical Properties Tester 5, 250, 500 and 1000 pounds Single and Dual column versions Test Methods Tensile Strength Compressive Strength Peel Strength Tear Adhesion Properties
More informationCES 3.2 Release Notes. Index
CES3.2 Release Notes September 2001 1 CES 3.2 Release Notes Index Introduction------------------------------------------------------- 2 Overview ----------------------------------------------------------
More informationCEE 151A Spaghetti Bridge Contest Loading Session: Friday 3/9 Location: SETH lab
CEE 151A Spaghetti Bridge Contest Loading Session: Friday 3/9 Location: SETH lab Design Question: Mr. Ali Morshedifard : morsheda@uci.edu Dr. Abdolhosseini : mjaq@uci.edu Fabrication and Loading Questions:
More informationDUCTILE TEARING ANALYSIS OF A CUSTOM PIPE TO FLANGE NOZZLE USING 3D CRACK MESHES
DUCTILE TEARING ANALYSIS OF A CUSTOM PIPE TO FLANGE Greg Thorwald, Ph.D. Principal Consulting Engineer, Quest Integrity Group, USA Michael Rock Engineering Project Manager, Mighty River Power Limited,
More informationMsds Epotek 353nd Part A Nextgen Adhesives
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with msds epotek 353nd part
More informationTest Report No MEC11/01A-ED dated 28 Sep 2011
Note: This report is issued subject to the Testing and Certification Regulations of the TÜV SÜD Group and the General Terms and Conditions of Business of TÜV SÜD PSB Pte Ltd. In addition, this report is
More informationFujifilm develops the new NDT films : Eco-Friendly HD S eries.
DATA SHEET INDUSTRIAL RADIOGRAPHIC SYSTEMS FUJIFILM INDUSTRIAL RADIOGRAPHIC FILM, IX80HD, IXHD Fujifilm develops the new NDT films : Eco-Friendly HD S eries. TYPES AND FEATURES These Films have the High
More informationConnect. Electricians' tools, consumables and enclosures x 210.0mm x 210.0mm. 26.0mm. 6.0mm. 6.0mm. 6.0mm. 12.0mm.
Connect Electricians' tools, consumables and enclosures Tooling and consumables which includes hand tools, crimping tools and solar tools for MC3 & MC4 connectors, electrical insulation tapes, cable pulling
More informationPhotoelastic and numerical stress analysis of a 2D contact problem and 3D numerical solution for the case of a rigid body on a deformable one
Computational Methods and Experimental Measurements XV 167 Photoelastic and numerical stress analysis of a 2D contact problem and 3D numerical solution for the case of a rigid body on a deformable one
More informationTailored Fiber Placement
FIBERPRINTER Automated Fiber Placement TM Tailored Fiber Placement Modular design and Additive manufacturing Tailored Fiber Placement Enabling Machine Solutions for Production and R&D LayStitch Technologies
More informationImprove Productivity with automated test setups, analysis, and reporting processes. Also improve reliability.
UTM Upgrades Our machine controller and software combines to add PC based data capture and test analysis to existing universal test machines from Tinius Olsen, Riehle, Baldwin, Amsler and Satec. Our modular
More informationLearning Module 8 Shape Optimization
Learning Module 8 Shape Optimization What is a Learning Module? Title Page Guide A Learning Module (LM) is a structured, concise, and self-sufficient learning resource. An LM provides the learner with
More informationDevelopment of Optical Coherence Tomography for the Measurement of the Surface Wrinkle of Composite Parts
Development of Optical Coherence Tomography for the Measurement of the Surface Wrinkle of Composite Parts Yoshiharu KUZE Composite Laboratory Manufacturing Technology Research Department May 9, 2017 1
More informationModelling of an Improvement Device for a Tension Test Machine in Crippling Tests
Modelling of an Improvement Device for a Tension Test Machine in Crippling Tests Iván Lafuente *, José L. Alcaraz **, and Iñigo Ortiz de Zárate * * Dpto. de Cálculo. Aernnova Engineering Solutions. 01510
More informationCopyright 2011 Rockwell Collins, Inc. All rights reserved. Continued advancements in direct optical bonding using Direct Dry Film
Continued advancements in direct optical bonding using Direct Dry Film Vision Manufacturing of unique optical bonding solutions Custom size/configurations Licensing of Rockwell Collins technology & intellectual
More informationNEW! RST Touch Series Rheometers Touch Screen Rheometers for Controlled Rate/Stress Measurement
NEW! RST Touch Series Rheometers Touch Screen Rheometers for Controlled Rate/Stress Measurement identifies barcode on spindle shaft Quick Connect Spindle Coupling for rapid spindle attachment (all models)
More informationAutomotive Adhesives and Sealants
3 Automotive Adhesives and Sealants Introducing the 3M Automotive Adhesives and Sealants Product Line... 27 High Turnover Products Targeted for the Professional Technician and DIY Customer Multiple Product
More informationSTRENX TUBE 100XF STRENX TUBE 100XF. General Product Description
STRENX TUBE 100XF STRENX TUBE 100XF General Product Description Advanced high-strength structural hollow sections Strenx Tube 100XF is an HF-welded cold-formed structural hollow section made of hot-rolled
More informationWWW.ADVANCEDCABLETIES.COM Why Advanced Cable Ties? Advanced Cable Ties is an ISO 9001:2015 registered company with products meeting the most current UL and CSA standards including UL Type 21S and Military
More informationNorthEast Transportation Training and Certification Program (NETTCP) Course Registration Form
(NETTCP) Course Registration Form Interim Certification (Cost $300 members / $425 non-members) HMA Plant Technician* Soils & Aggregate Lab Technician* Drilled Shaft Inspector* PG Asphalt Binder Laboratory
More informationDistribution by: i tape with CARTON SEALING TAPE. brand
Distribution by: TM i tape with CARTON SEALING TAPE brand Carton Sealing Tape IPG offers full line of pressure-sensitive carton sealing tape with all three adhesive technologies: acrylic, hot melt and
More informationComponents: Dimensions / Order Codes. *SP*1D*M*W2 * Single Weld Plate SP * STAUFF Group 1D * Thread code Metric ISO thread M. * Group Weld Plate
DIN 3015, Part 3 Components: Dimensions / Order Codes Clamp Body Clamp Body L1 L2 ød1 ød2 Clamp Body 1 PP One clamp body is consisting of two clamp halves. 1st Part of 1 Exact outside diameters Ø D1 /
More informationSine-waveVibroViscometer. Series. 2ml Sample Measurement Now Possible! ISO 9000 CERTIFIED. ...Clearly a Better Value.
Sine-waveVibroViscometer SV-A Series 2ml Sample Measurement Now Possible! IS 9000 CERTIFIED...Clearly a Better Value http://www.aandd.jp A&D s own technology is setting a new standard for viscosity measurement!
More informationA Locking-free Smoothed Finite Element Formulation (Modified Selective FS/NS-FEM-T4) with Tetrahedral Mesh Rezoning for Large Deformation Problems
A Locking-free Smoothed Finite Element Formulation (Modified Selective FS/NS-FEM-T4) with Tetrahedral Mesh Rezoning for Large Deformation Problems Yuki ONISHI, Kenji AMAYA Tokyo Institute of Technology
More informationA Finite Element Analysis of a Brake Lever
A Finite Element Analysis of a Brake Lever Report By: Nicole Andrews Student Number: 14816648 Module Title: Finite Element Analysis in Design Module Number: DP238 Module Leader: Derek Covill 1 Contents
More informationcover to the center of the bars depth of bottom reinforcement (h cover) depth of top reinforcement (h cover)
Interaction (ACI318) Checker today Input Column dimensions Reinforcement Materials (steel, concrete, bolts) Output Moment capacity Column interaction diagram RC Column Capacity - Axial Force - Bending
More informationFINITE ELEMENT ANALYSIS OF A COMPOSITE CATAMARAN
NAFEMS WORLD CONGRESS 2013, SALZBURG, AUSTRIA FINITE ELEMENT ANALYSIS OF A COMPOSITE CATAMARAN Dr. C. Lequesne, Dr. M. Bruyneel (LMS Samtech, Belgium); Ir. R. Van Vlodorp (Aerofleet, Belgium). Dr. C. Lequesne,
More informationANALYSIS AND OPTIMIZATION OF FLYWHEEL
Int. J. Mech. Eng. & Rob. Res. 2012 Sushama G Bawane et al., 2012 Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 1, No. 2, July 2012 2012 IJMERR. All Rights Reserved ANALYSIS AND OPTIMIZATION OF FLYWHEEL
More informationAISIBEAM User's Manual (Version 3.0)
AISIBEAM User's Manual (Version 3.0) Shabin Taavoni, Ph.D., PE, title Structural Software Inc. location John C. Huang Ph.D., PE, Principal CHC Engineering, LLC Herndon, VA Scope of Software The software
More informationTremco FX 130 Heavy Duty Chemical Anchor
Description FX 130 is a heavy duty 2 component vinylester styrene free injection system specially formulated for anchoring threaded bars, reinforcing bars (rebars) and sockets into concrete and most other
More informationChapter 3 Analysis of Original Steel Post
Chapter 3. Analysis of original steel post 35 Chapter 3 Analysis of Original Steel Post This type of post is a real functioning structure. It is in service throughout the rail network of Spain as part
More informationKey Moved to the body of 11 th Edition Moved to a SR of 11 th Edition Removed on 11 th Edition
AI SC5 Ballot Submission Task Group on OCTG Work Item Number 2395 Title of Work Item Type of Distribution [Voting and Comment, Comment-only, Recirculation (comment resolution), Re-ballot] AI Document Modified
More informationSample Storage STORAGE BOXES & RACKS
Sample Storage STORAGE BOXES & RACKS Polypropylene Storage Boxes... 80 81, 85 Cardboard Storage Boxes... 82 Cryogenic Storage Boxes... 82 83 Centrifuge Tube Storage... 84... 85 Multi-Tube Racks... 86 88
More informationDMA 4200 M. Density Meter for the Petroleum Industry. ::: Unique Density & Concentration Meters
DMA 4200 M Density Meter for the Petroleum Industry ::: Unique Density & Concentration Meters The all-rounder for all samples At last there is a density meter which can measure all of your petroleum samples,
More informationIdentification Products
D77 Automatic Marking System Compact heavy duty machine for high demand production of wire, cable and component marking PC link connection or stand alone mode with an optional standard keyboard Printing
More informationSpecial Documentation Proline Promass I 300 PROFIBUS PA
SD01722D/06/EN/01.16 71329856 Valid as of version 01.00.zz (Device firmware) Products Solutions Services Special Documentation Proline Promass I 300 PROFIBUS PA Viscosity Measurement application package
More informationPISTON SEALS BECA
PISTON SEALS BECA 500-502-504 DESCRIPTION The BECA 500-502 - 504 profiles are double acting composite piston seals composed of a filled PTFE friction ring and pre-tightened rubber O'Ring. They can be assembled
More informationEXPERIMENTAL VALIDATION OF TURNING PROCESS USING 3D FINITE ELEMENT SIMULATIONS
CHAPTER-5 EXPERIMENTAL VALIDATION OF TURNING PROCESS USING 3D FINITE ELEMENT SIMULATIONS This chapter presents the three-dimensional (3D) finite element analysis (FEA) to calculate the workpiece tool wear
More informationSimulation of AJWSP10033_FOLDED _ST_FR
Phone: 01922 453038 www.hyperon-simulation-and-cad-services.co.uk Simulation of AJWSP10033_FOLDED _ST_FR Date: 06 May 2017 Designer: Study name: AJWSP10033_FOLDED_STATIC Analysis type: Static Description
More informationDesign and Analysis for a Large Two-Lens Cell Mount Katie Schwertz OptoMechanics 523: Final Project May 15, 2009
Design and Analysis for a Large Two-Lens Cell Mount Katie Schwertz OptoMechanics 523: Final Project May 5, 2009 Abstract Presented below is a cell mount for two lenses that are 6 in diameter and made of
More informationMoving Die Rheometer Xgen100
Moving Die Rheometer Xgen100 Description: The new Future Foundation Rotorless, Moving Die Rheometer Xgen100 has been designed to meet the next generation of manufacturing technology. The Xgen100 is equipped
More informationSeries Rheometers Touch Screen Rheometers for Controlled Rate/Stress Measurement
BROOKFIELD _ VISCOMETERS / RHEOMETERS RST Touch Series Rheometers Touch Screen Rheometers for Controlled Rate/Stress Measurement The RST series of touch screen rheometers represent the best that Brookfield
More information