Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
|
|
|
- Douglas Johns
- 6 years ago
- Views:
Transcription
1 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK (part of and Smithers Pira Ltd) Shawbury Shrewsbury Shropshire SY4 4NR Contact: Kenn Amabilino Tel: +44 (0) Fax: +44 (0) Website: Testing performed at the above address only DETAIL OF ACCREDITATION Chemical Analysis Comparison of Molecular weight distribution by GPC In-House procedures numbered: RT HTGPC of PEEK RT GPC with THF or Chloroform RT HTGPC of Polyolefins RT GPC with HFIP RT GPC with Aqueous Eluents RT HTGPC with Polar Solvents Residual Acrylonitrile (ACN) in Nitrile Rubber Determination of ash content (Rubbers) Documented In House Method RT based on ASTM D (withdrawn) using GC- NPD In-House procedure RT based on BS ISO 247:2006 Assessment Manager: CA2 Page 1 of 6
2 (cont d) Chemical Analysis (cont d) Identification of hydrocarbon chloroprene, nitrile and chlorosulphonated polythene rubbers Determination of solvent extract In house method RT based on BS ISO 4650:2012 by infrared spectrometry In house method RT based on ISO 1407:2011 (equivalent to BS 7164:Part 3:1992 (withdrawn)) FOOD CONTACT TESTS Overall migration into olive oil In-house method RT based on BS EN :2002 Overall migration into aqueous simulants In house method RT based on BS EN :2002 In house method RT based on BS EN :2002 Assessment Manager: CA2 Page 2 of 6
3 FOOD CONTACT TESTS Overall migration into iso-octane and ethanol In house method RT based on BS EN :2002 Overall migration (levels of extractables) from elastomeric materials In house method RT based on FDA Regulations Chapter 21, Section for Repeat use rubber articles Mechanical and Physical Tests Density BS ISO 2781: A1:2010 BS EN ISO :2012:Method A Hardness BS ISO 48:2010 Indentation hardness BS ISO :2010 BS EN ISO 868:2003 Tensile and compressive properties (forces up to 200 kn) Tensile strength, elongation and elastic modulus (forces up to 200 kn) Flexural properties Izod impact strength BS ISO 37:2011 (Dumb-bells only) BS ISO 7743:2011 BS EN ISO 527-1: 2012 BS EN ISO 527-2: 2012 BS EN ISO 527-3:1996 BS EN ISO 178:2010+A1:2013 BS EN ISO 180:2000+A2:2013 Charpy impact strength BS EN ISO 179-1:2010 Falling weight impact resistance BS 2782:Part 3:Method 352D:1979 (withdrawn) Impact brittleness BS ISO 812:2011 Assessment Manager: CA2 Page 3 of 6
4 Mechanical and Physical Tests cont d Stress relaxation Low temperature crystallization effects Low temperature stiffness (Gehman method) BS ISO :2011+A1:2013 BS ISO 3387:2012 BS ISO 1432:2013 Standard atmospheres BS ISO 23529:2010 Elmendorf tear test BS EN ISO :2004 Modulus in shear (Quad Shear) BS ISO 1827:2011 Tear strength BS ISO 34-1:2015 Compression set BS ISO 815-1: 2014BS ISO 815-2: 2014: Method 1 only Rebound resilience (Lupke) temperature range -10 C to 50 C BS ISO Abrasion resistance BS ISO 4649:2010 (excluding 20 N load) ENVIRONMENTAL TESTING Resistance to ozone cracking (static) BS ISO :2012 Excluding clause 11 Heat resistance BS ISO 188:2011 THERMAL PROPERTIES and ANALYSIS Differential Scanning Calorimetry General Principles BS ISO :2009 Glass transition temperature (Tg) BS EN ISO :2014 Temperature and Enthalpy of melting and crystallization BS ISO :2013 Oxidation Induction Time BS ISO :2013 Assessment Manager: CA2 Page 4 of 6
5 CHEMICAL RESISTANCE Effect of liquids BS ISO 1817:2015 Fluid Contamination MIL-STD-810G, Notice 3 Method 504:2008 : Change 1 DEF STAN 00-35: Part 3/4:Chapter 4-04 Test CN4 BS 3G100:Part 2:Section 3:1991 Sub-section 3.12 RTCA/DO-160F:2007 RTCA/DO-160G:2010 DIMENSIONAL MEASUREMENTS Thickness BS 2782:Part 6:Method 630A:1994 ISO 4593:1993 PRODUCT TESTING Elastomeric seals for pipe joints Physical properties BS EN 681-1:1996 BS EN 681-2, -3 and -4:2000 BS EN 682:2002 CAST ACRYLIC SHEET FOR BATHS AND SHOWER TRAYS Tensile Testing BS EN 263:2008 TYRES Load/speed performance test ECE Regulation 30 ECE Regulation 54 ECE Regulation 75 RETREAD CAR AND COMMERCIAL VEHICLE TYRES TYRES FOR AGRICULTURAL VEHICLES Load/speed performance test Load/speed performance test Resistance to bursting Inflated tyre dimension limits for Load Speed Endurance to R106 Annex 9 Max Tyre Diameter: 1075mm Max Tread Width: 380mm ECE Regulation 108 ECE Regulation 109 ECE Regulation 106 MEDICAL DEVICE TESTING Vials Container closure seal integrity BS EN ISO :2016 (Annex D) Pre-Filled Syringes Breakloose and glide force BS ISO :2015 (Annex E) BS ISO :2016 Dye solution tightness test BS ISO :2015 (Annex H) Assessment Manager: CA2 Page 5 of 6
6 MEDICAL DEVICE TESTING (cont d) Needle based injection systems Dose accuracy BS EN ISO :2015 Syringes Plunger operation force BS EN ISO :1997 (Annex G) END Assessment Manager: CA2 Page 6 of 6
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Exploration Drive Aberdeen Science and Energy Park Aberdeen AB23 8HZ Contact: Mr Graham Robertson Tel: +44(0)1224 708500 Fax: +44(0)1224 772
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Schedule of Accreditation United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Green House Homefield Road Industrial Estate Haverhill Suffolk CB9 8QP Contact: Mr Paul
SR 1280 / SD 477x Epoxy Resin Systems
SD 477x Page 1 / 1 Epoxy resin SR 128 : Epoxy matrix Without classified Toxic products (T) SD 477x Epoxy Resin Systems Hardeners SD 477x: Without classified Toxic products (T) SD 4775 : Intermediate, medium
ISO/IEC INTERNATIONAL STANDARD. Identification cards Thin flexible cards Part 1: Physical characteristics
INTERNATIONAL STANDARD ISO/IEC 15457-1 Second edition 2008-03-01 Identification cards Thin flexible cards Part 1: Physical characteristics Cartes d'identification Cartes flexibles fines Partie 1: Caractéristiques
AS-568B Standard O-Rings Quick Reference Chart
AS-568B Standard O-Rings Quick Reference Chart General Applications Apple O-Rings are available in a choice of seven basic materials (1) each in a range of optional Durometer (Shore A) Hardnesses. Other
Quality Since 1935 SERIES EXPANSION JOINTS WON T
1-00-25-00 Quality Since 135 SERIES 0EZ EXPANSION JOINTS THEY PERFORM LIKE WON T YOU BELIEVE THE EVOLUTION OF ELASTOMERIC EXPANSION JOINT STYLES Standard Arch (The 130 s) Flowing Arch (The 170 s) Wide
GLOBAL CONNECTIONS PLC.
HMC Polymers http://www.hmcpolymers.com/products/ep546t Page 1 of 1 27/12/2556 Moplen EP546T High flow, high crystalline polypropylene impact copolymer resin Features Superior stiffness Good stiffness/impact
Laboratory Indian Rubber Manufacturers Research Association, Plot No.-254/ 1 B, Road No. 16V, Wagle Industrial Estate, Thane, Maharashtra
Last Amended on - Page 1 of 21 I. PLASTIC, RUBBER & LEATHER 1. Raw rubber/ Ingredients/ Compound/ Products Mooney Viscosity Mooney Scorch Vulcanisation Properties by Rheometer ASTM D-1646-07, IS 3660(13)/2013,
PISTON SEALS BECA
PISTON SEALS BECA 500-502-504 DESCRIPTION The BECA 500-502 - 504 profiles are double acting composite piston seals composed of a filled PTFE friction ring and pre-tightened rubber O'Ring. They can be assembled
Declaration of Performance (DOP)
Declaration of Performance (DOP) No. 9174 015 DOP 2018-01-08 1. Unique identification code of the product-type: Multi-wall chimney system type DW-ECO-TITAN according to 2. Type, batch or serial number
3S 1 13,5 1/4 3013, /8 1/ ,2 3/8 3017, / ,3 1/2 4021,3
DIN 3015, Part 2 Components: Dimensions / Order Codes Clamp Body ød1 S 1 Clamp Body One clamp body is consisting of two clamp halves. Colour: reen Material code: PP Colour: Black Material code: PA (87
These devices require adequately trained and experienced operating personnel.
MMA, 2014 PI Ceramic GmbH PD410 Circular PICMA Bender Piezo Actuators Figure 1: Circular PICMA bender actuator (here: PD410.10) INFORMATION Before soldering, installing and operating the actuator, read
DAIKIN GAS TIGHT JOINT (DGT)
LINE UP Model Name Size (mm) DAIKIN GAS TIGHT JOINT (DGT) SPECIFICATIONS BDGTA06 ø 6.4 BDGTA06 ø 9.5 BDGTA12 ø 12.7 BDGTA15 ø 15.9 BDGTA19 ø 19.1 BDGTA22 ø 22.2 BDGTA28 ø 28.6 DAIKIN GAS TIGHT JOINT Applicable
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 COOK RESEARCH INCORPORATED (CRI) 1 Geddes Way West Lafayette, IN 47906 Margaret McClure Phone: 765 463 7537 MECHANICAL Valid To: June 30, 2020 Certificate Number:
Technical keys to understand 3D-printing. Lucile BONHOURE. Sartomer, Arkema
RTE Conference & Exhibition 2017 Technical keys to understand 3D-printing Lucile BONHOURE Sartomer, Arkema Prague, October 19th, 2017 Agenda Introduction to 3D-Printing, stakes and technical challenges
Mobrey Squitch 2. Ultrasonic Liquid Level Switch. Product Data Sheet February 2015 IP207, Rev DB
Product Data Sheet February 2015 IP207, Rev DB Mobrey Squitch 2 Ultrasonic Liquid Level Switch A compact, self-contained, ultrasonic gap sensor, designed for switching in clean, non-aerated liquids BSPT
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COOK RESEARCH INCORPORATED (CRI) 1 Geddes Way West Lafayette, IN 47906 Margaret McClure Phone: 765 463 7537 MECHANICAL Valid To: June 30, 2016 Certificate Number:
onlinecomponents.com
Short-Travel Switch MICON 5 SMT standard version SMT low version THT standard version Order no. Terminals Height [mm] Operating Force F1 [N] (+- 20% ) Switching Travel S2 [mm] (+- 0.15 mm) Operating life
These devices require adequately trained and experienced operating personnel.
MMa, 2017 PI Ceramic GmbH PL112 PL140 Rectangular PICMA Bender Piezo Actuators Figure 1: Different rectangular PICMA bender actuator models INFORMATION Before soldering, installing and operating the actuator,
CERTIFICATE OF APPROVAL No CF 694 3M UK LTD
CERTIFICATE OF APPROVAL No CF 694 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of 3M Centre, Cain Road,
BILLING RATES - FY 14/15
Analytical Testing Laboratory Sample Preparation per hour $85.50 Industrial companies Extractions (Soxhlet) per sample $85.50 (Same Customers for all Testing Listed Below) Extractions (Supercritical) -
Declaration of performance (DOP)
Declaration of performance (DOP) 1. Unique identification code of the product-type: No. 9174 002 DOP 2013-06-17 Multi-wall chimney system type DW-KL according to 2. Type, batch or serial number or any
Official Distributors PRINTABLE TAGS PAGE PRINTABLE TAGS CM-SCE-TP HTCM-SCE-TP HLX HLX-NEL PAGE 28
PRINTABLE TAGS PRINTABLE TAGS CM-SCE-TP PAGE 29 HTCM-SCE-TP 31 HL 33 HLX 35 HLX-NEL 37 PAGE 28 CM-SCE-TP CM-SCE-TP Cable Markers are designed to offer flexibility when it comes to wire and cable identification.
Packaging. Carton Sealing Strapping Pallet Wrap Dispensers
Packaging Carton Sealing Strapping Pallet Wrap Dispensers CARTON SEALING Electro Tape offers a broad range of carton sealing tapes. Tapes with Kraft paper backings for easy tear that blend in with boxes.
Test Report No MEC11/01A-ED dated 28 Sep 2011
Note: This report is issued subject to the Testing and Certification Regulations of the TÜV SÜD Group and the General Terms and Conditions of Business of TÜV SÜD PSB Pte Ltd. In addition, this report is
FIRST STAND ALONE SERVO-HYDRAULIC TSRST
1 TSRST-Multi MULTI STATION THERMAL ASPHALT SYSTEM Standards: AASHTO TP10-1993 Standard test method for Thermal Stress Restrained Specimen Tensile strength EN 12697-46:2012 Test methods for hot mix asphalt
Testing, qualification and certification of your products
Testing, qualification and certification of your products Your challenge Element Materials Technology is a trusted advisor to the aerospace, oil & gas, transportation and industrial sectors. We understand
BILLING RATES - FY 10/11
Analytical Testing Laboratory TEXTILES, FIBERS, POLYMER SCIENCE Sample Preparation per hour $82.90 Extractions (Soxhlet) per sample $82.90 Greater Textile & Fiber Industries (Same Customers for all Testing
Bellows. Technical Principles Bellows
Technical Principles Bellows Bellows Technical Principles Bellows 704 Use of Bellows 706 Products Products 710 Design Types 711 Freudenberg Simrit GmbH & Co. KG Technical Principles 703 Technical Principles
Product Datasheet. Features Specifications Other Options
Product atasheet POLYESTER INSTRUMENT SUNSHAE (Page ) Multi Instrument Sunshade (Page 5) GRP Instrument Sunshades are used to protect instruments from weather elements at Oil & Gas sites. They have antistatic
PVC-U plastic sheets always set a good example
printing. lacquering. filming. PVC-U plastic sheets always set a good example Trade information for: Decorators Advertising technicians Digital printers Design & advertising agencies Exhibitors Exhibition
Impact & Drop Weight Testing Machine. JB Series Semi-automatic Pendulum Impact Testing Machine. Application:
JB Series Semi-automatic Pendulum Impact Testing Machine Application: JB series impact testing machines are used to determine the impact toughness of metal materials under dynamic load. The pendulum of
DIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS E-2000 Simplex PC/APC MULTIMODE PC Constant innovation in the field of fiber optics has created demand for products with ever increasing performance
RHM160. Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications. Features. Applications. Benefits
RHM160 Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications Features Standard Pressure ratings up to 50bar (725 psi) Temperature ratings from -196 to 120 C (-320 to 248 F) Mass flow
Declaration of performance (DOP)
Declaration of performance (DOP) 1. Unique identification code of the product-type: No. 9174 001 DOP 2013-06-17 Multi-wall chimney system type DW-FU according to 2. Type, batch or serial number or any
For the Electronics Industry
For the Electronics Industry Material of choice... VICTREX PEEK polymer offers a unique combination of properties that can greatly enhance the performance of electronic components. Victrex is an innovative
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
Rosemount 1595 Conditioning Orifice Plate
Rosemount 1595 Conditioning Orifice Plate Ordering information Rosemount 1595 Conditioning Orifice combines a flow conditioner with an orifice plate into a highly accurate primary element. Requires only
The dual display means that the current value and the threshold value, it makes direct setting of threshold value
735 Dual Display Digital Pressure Sensor DPC-L100 SERIES SERIES General terms and conditions... F-3 guide... P.699~ Related Information Glossary of terms... P.1563~ General precautions... P.1566 For Liquid
Standard Trackstar material. FDA/USDA approved material. Improved wear resistance and reduced thermal expansion Available in all colors except white
2 The Advantage Fight friction and reduce costs with long-wearing Trackstar UHMW Belt and Chain Guides. Available from stock, Fenner Drives offers the widest range of standard profiles for use in guiding
selection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
1. INTRODUCTION 2. REFERENCE MATERIAL. 1 of 8
Application Specification 67 Positions 0.5 Pitch M.2(NGFF) MINICARD 114-115006 19May14 Rev. B NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
Material Testing Machine
JINAN TIANCHEN TESTING MACHINE MANUFACTURING CO., LTD Address: No.66 Kaiyuan Road, Licheng District, Jinan City, Shandong Province, China. Zip ode: 250101 Tel: +86-531-88608888 Fax: +86-531-88607888 Web:
0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY
![0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY](/thumbs/83/88977257.jpg "0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY")
ONLINE CATALOG SWITCHCRAFT, INC. N. Elston Ave. Chicago, IL 00 77 79-700 FAX: 77 79-19 www.switchcraft.com EN MINI WEATHERTIGHT CONNECTOR SERIES EN CORD CONNECTOR 1.8 [9.8] 0. REF 0.70 dia. [17.8] PIN
MLSEP*** Series. Multilayer Polymer ESD Suppressor. Features. Application. Electrical Characteristics
Features ESD protection for high speed data lines to IEC61000-4-2 ESD contact discharge typical 8KV, max 15KV IEC61000-4-2 ESD air discharge typical 15KV, max 25KV Protect four data lines Flow through
bar Round (303S31) Round (303S31) Bright Drawn H9 Dia (in) Weight/m (Kg) Weight/m (Kg) Dia (in) 20mm
A World of Metal bar mm mm mm mm mm 7mm mm 9mm 0mm 0.0 0.0 0.0 0.0 0. 0. 0.9 0. 0. 0.0 0. 0.9 0.0 0.0 0. 0. 0.7 mm mm mm mm mm 7mm mm 0mm mm mm mm 0.9 0.99.0...9.7..00..7.9.0...0 (0S) Bright Drawn H9
ISO INTERNATIONAL STANDARD. Plastics Determination of dynamic mechanical properties Part 2: Torsion-pendulum method
INTERNATIONAL STANDARD ISO 6721-2 Second edition 2008-06-01 Plastics Determination of dynamic mechanical properties Part 2: Torsion-pendulum method Plastiques Détermination des propriétés mécaniques dynamiques
PVC-U plastic sheets always set a good example
printing. lacquering. filming. PVC-U plastic sheets always set a good example Trade information for: Decorators Advertising technicians Digital printers Design & advertising agencies Exhibitors Exhibition
Europrene Intol ESBR HSR. ESBR Emulsion Polymerized Styrene-Butadiene Rubber. HSR Emulsion Resin-Rubber Masterbatch
Europrene Intol ESBR HSR ESBR Emulsion Polymerized Styrene-Butadiene Rubber HSR Emulsion Resin-Rubber Masterbatch Emulsion Polymerized Styrene-Butadiene Rubber (ESBR) ESBR HSR Grades Bound Mooney viscosity
Selection can be made from different capacities (ranging from 100kN to 2000kN) from HL 590 / HL590 (FL) series or HLC 591 / HLC 591 (FL) series.
Universal Testing Machines UNIVERSAL TESTING MACHINE HEICO UTM is suitable to conduct following tests - (i) Compression (ii) Tension (iii) Transverse (iv)bending (v) Shear (vi) Hardness and many others
Keypad with pressure point with embossing (Mylardom indirect) Front membrane. (contact membrane) Spacer (adhesive on both sides) Switch membrane 2
Construction LEDs Normally the external side of the transparent front membrane is matt. The membrane is printed on the back, so the printing is protected against environmental influences such as dirt,
Glass Pipette & PEEK Tubing Connectors
Glass Pipette & PEEK Tubing Connectors Quick and reliable connection of glass capillary needles and PEEK tubing to most Removable Needle (RN) and Knurled Hub (KH) terminations. Mass Spectrometer Tuning
BESMAK BMT - E SERIES
A) TECHNICAL SPECIFICATIONS Frame: Electronic Unit: Control: Electronic Control Unit Resolution: Loading Accuracy: Load Accuracy Range: 2 Column and Single or Double Working Area EDC Controller 1) EDC
Lever Actuated Zero Insertion Force
Lever Actuated Zero Insertion Force Application Specification (ZIF) Micro Pin Grid Array (PGA) 114 13034 478B and 479 Position Sockets 17 OCT 03 Rev C NOTE All numerical values are in metric units [with
TERALINK TM A cross-linked thermoplastic polymer for Optical Components that can withstand SMT processes
TERALINK TM A cross-linked thermoplastic polymer for Optical Components that can withstand SMT processes Sumitomo Electric Fine Polymer, Inc. Innovation Core SEI, Inc. (ICS) Sumitomo Electric Industries,
RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment
RMI-RMP L100.05 us B RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment STÄUBLI CORPORTION P.O. BOX 189 - DUNCN - S.C. 29334 PHONE 864/433-1980 TOLL-FREE NUMBER
ESD Tape Applications
DESCO INDUSTRIES INC. Technical Bulletin TB-3010 ESD Tape Applications Wescorp ESD Tapes In ESD protected areas, replace regular high charging tape with Wescorp ESD Tape. ANSI/ESD S20.20 section 8.3.1.
UNIVERSAL TESTING MACHINE
Universal Testing Machines UNIVERSAL TESTING MACHINE HEICO UTM is suitable to conduct following tests (i) Compression (ii) Tension (iii) Transverse (iv)bending (v) Shear (vi) Hardness and many others on
Head-separated Dual Display Digital Pressure Sensor DPC-L100 SERIES DPH-L100 SERIES. High-precision detection of fluid and air pressure
689 PHOTO PHOTO Dual Display Digital Pressure Sensor DPC-L100 SERIES SERIES General terms and conditions... F-17 Sensor selection guide... P.661~ Related Information Glossary of terms... P.1373~ General
Servo-Hydraulic Universal Testing Machine
Servo-Hydraulic Universal Testing Machine CRT-UTM-HYD A new generation of Universal Testing Machine combining state of the art technology with proven reliability and precision for research and standard
Connectivity Products
Cable Glands Strain Relief Snap-In Labels Lock Nuts Torque Wrench Protective Sleeves U2 U5 U5 U6 U7 U8 Features NPT and PG thread cable glands in nylon or metal materials Locknuts in multiple thread sizes
TASK-LINE GASKETS. The original is still the best.
2 TASK-LINE GASKETS The original is still the best. TASK-LINE ADVANTAGES Maximum protection Zero corrosion rate No retorquing after installation Blowout protection No fabrication or waste Reusable Non-porous
MTD75 Comprehensive cooling tower controller with all the functions required for dosing and control of cooling water
MTD75 Comprehensive cooling tower controller with all the functions required for dosing and control of cooling water Features Real time clock for accurate timed dosing Water meter input for volumetric/proportional
Ultrasonic Calibration Blocks & Welded Flawed Specimens for NDE Training
Ultrasonic Calibration Blocks & Welded Flawed Specimens for NDE Training Ultrasonic Calibration Blocks Custom blocks available upon request All blocks are available in metric/ inch dimensions Standard
Overview. Control. wintest Analysis universal testing software is a fully-integrated and fullycustomisable
1 Overview wintest Analysis universal testing software is a fully-integrated and fullycustomisable package that supports all industry standards including ISO, ASTM and BS EN specifications. Test types
Splice Trays An Evolant Solutions Product
Applications For use with indoor or outdoor splice hardware Protects and manages fibers and fiber splices Used at field splice, transition splice and end splice locations Description splice trays use proven
Complete the Installation SKINTOP MS-SC. Approvals: Approx. SKINTOP Part
ETHERLINE HEAT 6722 Flexible special Ethernet cable for high-temperature applications ETHERLINE HEAT 6722 ETHERLINE HEAT 6722 ETHERLINE HEAT 6722 Insulation: polyolefin wrapped with special fire-retardant
Output configuration Contact form Operation indicator Cable length Model PNP open collector. 1 m D5F-2B10 (+ common) ON when operated
High-precision Optical Switch D5F CSM_D5F_DS_E_2_2 Optical System Achieves 1-μm Operating Position Repeatability in this 4-way Switch No-contact structure for high reliability. Ceramic materials in measuring
ISO 4647 INTERNATIONAL STANDARD. Rubber, vulcanized Determination of static adhesion to textile cord H-pull test
INTERNATIONAL STANDARD ISO 4647 Second edition 2010-10-01 Rubber, vulcanized Determination of static adhesion to textile cord H-pull test Caoutchouc vulcanisé Détermination de l'adhérence statique au câblé
PC (Polycarbonate) : the Solution and Challenge in ever-changing Mobile Gadgets. Dr. Young J. Lee and Dr. Sung S. Min. Sep.
PC (Polycarbonate) : the Solution and Challenge in ever-changing Mobile Gadgets Dr. Young J. Lee and Dr. Sung S. Min Sep., 09 th, 2005 Chemical R&D Center Cheil Industries Inc. Affiliated Companies Electronics
Double Coated. Films, Cloth, Paper AcrylicTransfer DC PE Foam EHB Acrylic Foam SC PVC Foam
Double Coated Films, Cloth, Paper AcrylicTransfer DC PE Foam EHB Acrylic Foam SC PVC Foam 56 FILM Double Coated Tapes are suitable for a wide range of applications in virtually every industry. Double Coated
ELASTOMERIC CONNECTORS. the smart solution for high-volume interconnections in compact design
ELASTOMERIC CONNECTORS the smart solution for high-volume interconnections in compact design A NICE SIMPLE, RELIABLE CONNECTION How do elastomeric connectors work? STAX elastomers are zero insertion force
ISO/IEC INTERNATIONAL STANDARD. Identification cards Test methods Part 1: General characteristics
INTERNATIONAL STANDARD ISO/IEC 10373-1 Second edition 2006-05-01 Identification cards Test methods Part 1: General characteristics Cartes d'identification Méthodes d'essai Partie 1: Caractéristiques générales
PolyJet Materials. The Power Behind Your 3D Printer
PolyJet Materials TM The Power Behind Your 3D Printer With hundreds of materials to choose from, PolyJet 3D Printing gives you highly realistic, functional 3D models. PolyJet materials are capable of simulating
Packaging. Carton Sealing Strapping Pallet Wrap Dispensers
Packaging Carton Sealing Strapping Pallet Wrap Dispensers 48 CARTON SEALING All of Electro Tapes carton sealing tapes feature a non-yellowing and UV resistant acrylic based adhesive system carried on conformable
Testing Equipment Product Catalogue
Testing Equipment Product Catalogue Our Company We are a newly established business, developing, manufacturing and trading laboratory testing instruments for paper, board, tissue, and pulp. Our members
Electrial. Vinyl Rubber Friction Specialty Cable Ties
Electrial Vinyl Rubber Friction Specialty Cable Ties VINYL ELECTRICAL Electro Tape offers a complete line of PVC vinyl electrical tapes suitable for a broad range of environments and applications. All
TST350 - Tensile Stress Testing System
TST350 - Tensile Stress Testing System Accurately Characterize the tensile properties of your sample relative to temperature utilising the 0.001N sensitive force transducer and capture high resolution
ANALYTICAL SERVICES DIVISION, VHG LABS Manchester, NH for technical competence in the field of
A2LA has accredited ANALYTICAL SERVICES DIVISION, VHG LABS Manchester, NH for technical competence in the field of Chemical Testing This laboratory is accredited in accordance with the recognized International
BELLOWS COVERS AND.
BELLOWS AND COVERS www.joycedayton.com BELLOWS AND COVERS REDUCE EXPENSIVE MAINTENANCE AND DOWN TIME Protect your Equipment Investment When bellows and covers are fitted to machinery, expensive maintenance
% StrainMaster Portable. Full Field Measurement and Characterization of Materials, Components and Structures
7.72974 % StrainMaster Portable Full Field Measurement and Characterization of Materials, Components and Structures Whole Surface Measurements StrainMaster systems are based around the technique known
GALAXY ADVANCED ENGINEERING, INC. P.O. BOX 614 BURLINGAME, CALIFORNIA Tel: (650) Fax: (650)
GALAXY ADVANCED ENGINEERING, INC. P.O. BOX 614 BURLINGAME, CALIFORNIA 94011 Tel: (650) 740-3244 Fax: (650) 347-4234 E-mail: bahmanz@aol.com PUFF-TFT/PC A Material Response Computer Code for PC Computer
ELASTOMERS TECHNICAL INFORMATION
ELASTOMERS TECHNICAL INFORMATION EUROPRENE ESBR HSR ESBR HSR EMULSION POLYMERIZED STYRENE-BUTADIENE RUBBER EMULSION RESIN-RUBBER MASTERBATCH ESBR HSR EUROPRENE ESBR Dry types Bound styrene (1) Mooney viscosity
PolyJetTM. Materials. The Power Behind Your 3D Printer
PolyJetTM Materials The Power Behind Your 3D Printer With hundreds of materials to choose from, PolyJet 3D Printing gives you highly realistic, functional 3D models. PolyJet materials are capable of simulating
TDSMLG2010R01 Magnetic Level Gauges & Level Transmitters
Magnetic Level Gauges provides clear, high clarity indication of liquid level. Magnetic Level Gauges are principally designed as an alternative to glass level gauges. MLGs are now widely used in all industries
List of forms CLAP/WGP by subject /68/UE
List of forms CLAP/WGP by subject - 2014/68/UE Subject Assembly - Assembly including an item of pressure equipment placed on the market before 29 May 2002 in compliance with national pre-ped regulations
SMPM Male Thru-Hole Printed Circuit Board Mount Connector
SMPM Male Thru-Hole Printed Circuit Board Mount Connector Application Specification 114-13212 17 JAN 13 i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 9154 Second edition 2016-02-15 Aerospace Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa Procurement specification Aéronautique et
Clamps with RUBBER BUSHING
Clamps with RUER USHING Order Codes p 34 Dimensions p 34 CLAMPS WITH RUER USHING Mounting example p 37 STANDARD SERIES CLAMPS WITH RUER USHING Order Codes PIPE CLAMPS AND RUER USHING MATERIAL (two clamp
panasonic.net/id/pidsx/global
73 PHOTO PHOTO Digital Pressure Sensor For Gas SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1563~ guide... P.699~ General precautions... P.1566 MEASURE Simple &
FUJIPOLY DATA SHEET NUMBER FPDS / Version 8
ISSUED : April 18th. 2008. Version 8 SARCON Low with High Heat Comductivity. QR Series. FUJIPOLY and SARCON, are registered Trademarks of Fujipoly Group FUJIPOLY DATA SHEET NUMBER FPDS 96-06 / Version
SPIRAL WOUND GASKET. Spiral Wound Gasket CALVOSEALING DESCRIPTION PROPERTIES
CALVOSEALING Spiral Wound Gasket SPIRAL WOUND GASKET DESCRIPTION Spiral wound gaskets consist of a V-shaped metal strip spirally wound in combination with a soft, filler material. The metal strip provides
3M Cold Shrink QS-III Inline Splice Kits 15 kv 5415A, 5416A, 5417A, 5417A-WG, 5418A and 5418A-WG
3M Cold Shrink QS-III Inline Splice Kits 15 kv Data Sheet July 2013 Jacketed Concentric Neutral (JCN) 5415A, 5416A, 5417A, 5418A Concentric Neutral (JCN) 5417A-WG and 5418A-WG! CAUTION Working around energized
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
Technical Assessment Body issuing the ETA and designated according to Article 29 of the Regulation (EU) No 305/2011: UL International (UK) Ltd
Member of www.eota.eu UL INTERNATIONAL (UK) LTD Wonersh House, Building C, The Guildway, Old Portsmouth Road, Guildford. GU3 1LR. United Kingdom. designated according to Article 29 of the Regulation (EU)
3M Cold Shrink QS-III Inline Splice Kits 25/28 kv 5456A, 5456A-WG, 5457A, 5457A-WG, 5458A and 5458A-WG
3M Cold Shrink QS-III Inline Splice Kits 25/28 kv 5456A, 5456A-WG, 5457A, 5457A-WG, 5458A and 5458A-WG Data Sheet July 2013 Jacketed Concentric Neutral (JCN) 5456A, 5457A and 5458A Concentric Neutral (JCN)
LTCC (Low Temperature Co-fired Ceramic)
LTCC (Low Temperature Co-fired Ceramic) Design Guide Line. 381, Wonchun-Dong, Paldal-Ku, Suwon City, Kyung Ki-Do, Republic of Korea Tel : 82-31-217-2500 (Ext. 470) Fax : 82-31-217-7316 Homepage : http://www.pilkorcnd.co.kr
259 Yorktown Road, College Town, Berkshire, GU47 0RT Tel: Fax:
259 Yorktown Road, College Town, Berkshire, GU47 0RT Tel: 01276 600200 Email: info@nfi.uk.com Fax: 01276 600161 NFI UK LTD NFI UK Harsh Environment Fibre Optic Connectors NFI UK harsh environment connectors
THE AEC 1112 COMPUTERISED UNIVERSAL TESTING MACHINE
THE AEC 1112 COMPUTERISED UNIVERSAL TESTING MACHINE PRODUCT DESCRIPTION THE AEC 1112 COMPUTERISED UNIVERSAL TESTING MACHINE is vertical floor standing electro mechanical dual column mainly used for testing
Dispensing Applications and Methods. August, 2014 Mani Ahmadi, Director of Technical Services Nordson, Advanced Technology Systems
Dispensing Applications and Methods August, 2014 Mani Ahmadi, Director of Technical Services Nordson, Advanced Technology Systems 1 August 2014 Agenda Introduction Dispensing method and technologies for