TIBCO Spotfire Web Player Release Notes. Software Release October 2014

Transcription

1 TIBCO Spotfire Web Player Release Notes Software Release October 2014

2 Important Information SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (OR PROVIDE LIMITED ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDED OR BUNDLED SOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCO SOFTWARE OR FOR ANY OTHER PURPOSE. USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONS OF A LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSE AGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USER LICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THE SOFTWARE (AND WHICH IS DUPLICATED IN THE LICENSE FILE) OR IF THERE IS NO SUCH SOFTWARE LICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATED IN THE LICENSE FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMS AND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND AN AGREEMENT TO BE BOUND BY THE SAME. This document contains confidential information that is subject to U.S. and international copyright laws and treaties. No part of this document may be reproduced in any form without the written authorization of TIBCO Software Inc. TIBCO, The Power of Now, TIBCO Spotfire Web Player are either registered trademarks or trademarks of TIBCO Software Inc. in the United States and/ or other countries. All other product and company names and marks mentioned in this document are the property of their respective owners and are mentioned for identification purposes only. THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALL OPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THE SAME TIME. SEE THE README FILE FOR THE AVAILABILITY OF THIS SOFTWARE VERSION ON A SPECIFIC OPERATING SYSTEM PLATFORM. THIS DOCUMENT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKE IMPROVEMENTS AND/ OR CHANGES IN THE PRODUCT(S) AND/ OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENT AT ANY TIME. THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/ OR QUALIFIED, DIRECTLY OR INDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDING BUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES. This Product is covered by U.S. Patent No. 6,014,661 and 7,216,116. Copyright TIBCO Software Inc. ALL RIGHTS RESERVED. TIBCO Software Inc. Confidential Information

3 i Contents Preface... ii Typographical Conventions... iii Connecting with TIBCO Resources... iv How to Join TIBCOmmunity... iv How to Access All TIBCO Documentation... iv How to Contact TIBCO Spotfire Support... iv Release Notes... 1 New Features... 2 Release Changes in Functionality... 3 Release Deprecated and Removed Features... 4 Release Migration and Compatibility... 5 Release Closed Issues... 6 Known Issues... 8

4 ii Preface Topics Typographical Conventions, page iii Connecting with TIBCO Resources, page iv

5 iii Typographical Conventions General Typographical Conventions Convention code font bold code font italic font Key combinations Use The following typographical conventions are used in this manual. Code font identifies commands, code examples, filenames, pathnames, and output displayed in a command window. For example: Use MyCommand to start the foo process. Bold code font is used in the following ways: In procedures, to indicate what a user types. For example: Type admin. In large code samples, to indicate the parts of the sample that is of particular interest. In command syntax, to indicate the default parameter for a command. For example, if no parameter is specified, MyCommand is enabled: MyCommand [ enable disable] Italic font is used in the following ways: To indicate a document title. For example: See Concepts. To introduce new terms For example: A portal page may contain several portlets. Portlets are mini-applications that run in a portal. To indicate a variable in a command or code syntax that you must replace. For example: MyCommand PathName Key name separated by a plus sign ind icate keys pressed simultaneously. For example: Ctrl+C. Key names separated by a comma and space indicate keys pressed one after the other. For example: Esc, Ctrl+Q. The note icon indicates information that is of special interest or importance, for example, an additional action required only in certain circumstances. The tip icon indicates an id ea that could be useful, for example, a way to apply the information provided in the current section to achieve a specific result. The warning icon indicates the potential for a d amaging situation, for example, data loss or corruption if certain steps are taken or not taken.

6 iv Connecting with TIBCO Resources How to Join TIBCOmmunity TIBCOmmunity is an online destination for TIBCO customers, partners, and resident experts, a place to share and access the collective experience of the TIBCO community. TIBCOmmunity offers forums, blogs, and access to a variety of resources. To register, go to / How to Access All TIBCO Documentation After you join TIBCOmmunity, you can access the documentation for all supported product versions here: / d ocs.tibco.com/ How to Contact TIBCO Spotfire Support For comments or problems with this manual or the software it addresses, please contact TIBCO Spotfire Support as follows. For an overview of TIBCO Support, and information about getting started with TIBCO Support, visit this site: / services/ support If you already have a valid maintenance or support contract, visit this site: / support.tibco.com Entry to this site requires a username and password. If you do not have a username, you can request one.

7 Release Notes 1 Release Notes Check the TIBCO Prod uct Support web site at / support.tibco.com for product information that was not available at release time. Entry to this site requires a username and password. If you do not have a userna me, you can request one. You must have a valid maintenance or support contract to use this site. See the TIBCO Spotfire System Requirements web page for a detailed description of the system requirements for TIBCO Spotfire. Topics New Features, see page 2 Changes in Functionality, see page 2 Deprecated and Removed Features, see page 4 Migration and Compatibility, see page 5 Closed Issues, see page 6 Known Issues, see page 8

8 Release Notes 2 New Features This section lists features added since the last release of this product. Release This service pack resolves a security issue. Release 6.0 The following are new features in this release. TIBCO Spotfire Business Author TIBCO Spotfire 6.0 includ es Business Author, new functionality allowing users to create and configure analyses, a substantial extension to the analytic capabilities of the Web Player. o o o The configuration options include adding and replacing data, adding new pages and visualizations to the analysis and rearranging the visualization layout. DXP files and data files can be stored in the library or on local disk. Business Author is sold as a separate product and enabled with the TIBCO Spotfire Business Author license. To get all the available functionality the TIBCO Spotfire Enterprise Player license is also needed. New library TIBCO Spotfire 6.0 includ es a new and redesigned library browser. There is also a new configuration option for the library which mak es it possible to hide all user names. Session timeout redirect TIBCO Spotfire 6.0 includ es a new feature which will redirect the user to the login screen after a configurable amount of time.

9 Release Notes 3 Changes in Functionality This section lists changes in functionality since the last release of this prod uct. Release 6.0 A new setting, maxrenderingtimems, has been introduced. This can be used to prevent long running requests or jobs from making the TIBCO Spotfire Web Player unresponsive.

10 Release Notes 4 Deprecated and Removed Features This section lists features that have been deprecated or removed since the last release of this prod uct. Release 6.0 Deprecated Features No features are deprecated in this release. Removed Features No features are removed in this release.

11 Release Notes 5 Migration and Compatibility This section explains how to migrate from a previous release to this release. Release 6.0 Installation Follow the instructions in the TIBCO Spotfire Web Player 6.0 Installation Manual to install TIBCO Spotfire Web Player 6.0. Installation Notes Installing the TIBCO Spotfire Web Player from a network drive is not possible; the installer must be run locally. While technically possible, it is n ot recommended to install TIBCO Spotfire Web Player on the same machine as the TIBCO Spotfire Server. Performance for both prod ucts will be affected negatively, and there are complications concerning port numbers. The installation program creates a virtual directory called SpotfireWeb under the Default Web Site in IIS. If there is more than one web site on the server, it is important to select the port for the correct web site during installation, as described in the TIBCO Spotfire Web Player Installation Manual. It is particularly important to install TIBCO Spotfire Web Player and TIBCO Spotfire Server on separate machines when using Kerberos authentication. Additional information and advice on troubleshooting are available in the installation manual.

12 Release Notes 6 Closed Issues Closed In Release Key The table in this section list issues that w ere closed in the named release. Summary TSWP-3241 If JavaScript API is enabled and the initial version ( ) of.net Framework 4.0 is used, the Web Player will fail to start. 5.5 TS When using a dynamic named set from Microsoft SQL Server Analysis Services and setting up a filtering operation that affects the result of the dynamic set, it will result in a broken visualization with the error message, The d ata columns from the external connection do not match. 5.0 TS When having duplicate attribute hierarchy values and doing a Color by that attribute hierarchy, duplicate hierarchy values get the same color even though they represent different logical entities TS When having duplicate attribute hierarchy values in a cross table and perform ing a sort on one of the duplicate values, the cross table is always sorted according to the first duplicate value. 5.5 TS When having duplicate attribute hierarchy values in a treemap, performing a drilldown using one of the duplicate values will always use the first of the duplicate values as defined by their unique name sort order. 5.0 TS When using sets from Microsoft SQL Server Analysis Services in a cross table and enabling subtotals and grand totals, a configuration error will be displayed in the visualization. 5.5 TS The Filter tab in the Export to PDF dialog shows unique value instead of presentation value when using Microsoft SQL Server Analysis Services in-db data. 5.5 TS Hebrew characters in visualizations and header or footer are not correctly rendered in exported PDF. 6.0 TSWP-3775 Audit log events where not reported correctly when file was opened via mashup. 6.0 TSWP-3643 Impersonation sometimes failed when user name 6.0 TS Tiled markers in a scatter plot have a line drawn diagonally over them when exporting to PDF. 6.0 TS Exporting a heat map with many rows to PDF with vector graphics results in an empty visualization. 6.0 TS When exporting a table visualization with columns rendered as links to PDF, the underline will become a strikethrough. 6.0 TSWP-3990 Memory may not be released after executing a Python script, which explicitly catches exceptions within the script. 6.0 TSWP-4228 Chrome reports SecurityError for Custom Visualization appearing in Mashups when the JavaScriptAPI domain is set. 6.0 TSWP-3887 Image requests are not cancelled when closing the web browser. 6.0 TSWP-3494 When an analysis contains large data sets, rendering and filtering may take some time, and TIBCO Spotfire Web Player may become unstable if data is exported while visualizations are still in the process of rendering or filtering. 6.0 TSWP-3719 When using the Web Player on ipad, visualizations are only partly visible when using the setting "ipad Landscape" or "ipad Portrait". 6.0 TSWP-3747 Axis selectors are not upd ated when changing Bar Chart orientation in Web Player via script.

13 Release Notes 7 Closed In Release Key Summary 6.0 TSWP-3873 The Filter panel is not upd ated when the Filtering scheme is changed via scripting. 6.0 TSWP-3676 The Spotfire Client may terminate with the exception "An item with the same key has alread y added", when having a Cross Table or Heat Map in an invalid state and having multiple expressions for cell values that had the same alias/ display name. 6.0 TSWP-3975 TIBCO Spotfire may terminate under some conditions when using Conditional Coloring in Cross Tables and Heat maps, with the error "System.NullReferenceException at Sp otfire.dxp.ap p lication.visu als.cond itionalcoloring.coloringcollection.find LevelBy Name". 6.0 TSWP-3945 Public Javascript API throws an exception when trying to get marked items and a filtering scheme is supplied. 6.0 TSWP-1710 Insufficient error information when d ata source credentials are incorrect. 6.0 TSWP-3903 Formatting on columns not propagated through expressions in a plot when user has a different locale than the web player server is running. 6.0 TSWP-3772 "CryptographicException: Key not valid for use in specified state." while running any analysis with script. 6.0 TSWP-4708 Color By cannot be unset using Property Control in the legend. 6.0 TSWP-4026 Changing the selections in the hierarchy filter in the filter panel causes the hierarchy filter to disappear momentarily. 6.0 TSWP-3802 Actions in a Graphical Table without marking where not performed when using IE TSWP-4696 Original Exception sometimes lost when creating mini dump while Web Player is terminating. 6.0 TSWP-4445 Open certain analysis fails with error Invalid OperationException: Attempt to read from a node that is in state 'Disposed'. 6.0 TSWP-3498 Open certain analysis fails with error System.Collections.Generic.KeyNotFoundException 6.0 TSWP-3775 The audit.log file incorrectly reports a failure for every analysis file opened via mashup. 6.0 TSWP-4527 No redirection to error page upon error, if permission is denied to access 'defaultajaxerrorhandler' 6.0 TSWP-3916 Analysis is closed unexpectedly in Firefox and Chrome if changing width while zoomed in. 6.0 TSWP-4498 Launching Spotfire from a tibcospotfire link to a server using Wind ows Integrated Authentication shows the login dialog with an error message instead of logging in automatically. 6.0 TSWP-3793 Table collapse button is sometimes missing in the filter panel. 6.0 TSWP-4223 Dynamic item in description is sometimes not updated.

14 Release Notes 8 Known Issues The table in this section lists known issues in this release. Key TS TS Summary/Workaround Summary If JavaScript is disabled in the web browser, analysis files will not appear and the application cannot be used. Summary When exporting a map chart to PDF using vector graphics, the map is not rendered correctly. Workaround Use raster graphics when exporting a map to PDF. Summary Bars disappear (or become too thin to see) when exporting to PDF, if there are many bars in a bar chart. Workaround Use raster graphics when exporting to PDF. Summary If regular cookies are turned off in the web browser, the Remember Me function will not work properly. Summary If you use impersonation between a TIBCO Spotfire Web Player and a TIBCO Spotfire Server that uses NTLM authentication, the impersonator account (that is username and password) must only contain US ASCII characters. This is not applicable to end user accounts. Summary If the TIBCO Spotfire Web Player and the TIBCO Spotfire Statistics Services is installed on the same machine (with IPV6 installed), make sure that the address does not contain localhost. For example, if it is set to / localhost:8080/ SplusServer, change it to / :8080/ SplusServer. Summary If the TIBCO Spotfire Web Player is configured to use certificates, it is not possible to log in with an ipad. Summary Analysis files that require prompting, other than prompted information links, are not supported in the TIBCO Spotfire Web Player. Summary Value renderers developed with the TIBCO Spotfire 2.2 API are not supported. Summary A cond itional coloring rule based on a custom expression including a property will be initially disabled when the analysis is opened. Once the property value is updated (typically through a property control in a Text Area), the rule will be evaluated and applied to the visualization. Summary Using the built-in zoom function in Internet Explorer 7.0 or later may affect the interaction in such a way that marking in visualization d oes

15 Release Notes 9 Key TSWP-4912 Summary/Workaround not follow the movement of the mouse pointer. Summary Bad performance when using TERR engine on TIBCO Spotfire Statistics Services for calculations if authentication is enabled. Workaround None