Install Guides. Automated Compiler Cold Node (Linux VPS) Absolute. Proof of View
|
|
- Valerie Benson
- 5 years ago
- Views:
Transcription
1 Install Guides Automated Compiler Cold Node (Linux VPS) Absolute. Proof of View
2 Automated Compiler Cold Node Masternode - Linux VPS Cold Node Masternode A Masternode runs on another computer (VPS) which acts as the cold node, while the coins are stored locally in your wallet (Hot Node). This is a more secure approach than just running a hot wallet, as the public IP address associated with the Masternode is not the same as the wallet IP address. In addition, the shutdown of the hot node wallet does not affect the Masternode. This installer will run a full compile of the Absolute wallet from source. The estimated time of compiling is based on hardware setup but can take up to 60 minutes. Prerequisites 2500 ABS Collateral: The required collateral for the Absolute Master Node setup is 2500 coins as of V a. No more no less. A local wallet: Place where you will store the collateral of 2500 ABS. Windows or linux wallets are accepted. SSH client for your VPS: We recommend Putty client if you are on windows or directly ssh from OSX/Linux 1.Connect to your VPS Terminal with SSH Launch Putty and enter your VPS IP address into the Host Name field. Other settings should stay default. We recommend you to save this IP address in Putty. To do so, name it in the Saved Sessions Box and Save. Click Open. You will see a pop-up message with a security alert about the keys. Click Yes. Log in to your VPS. The VPS provider should give you both the username and the password.
3 2.Swap Memory Setup This step is not applicable for VPS with 2 GB or more of RAM. Otherwise, enter the command into the terminal (in Putty press RIGHT CLICK to Paste): dd if=/dev/zero of=/mnt/myswap.swap bs=1m count=4000 mkswap /mnt/myswap.swap chmod 0600 /mnt/myswap.swap swapon /mnt/myswap.swap You can add the swap file information to the end of your /etc/fstab file by typing: echo '/mnt/myswap.swap swap swap defaults 0 0' sudo tee -a /etc/fstab Now we can do some tweaking. Swapiness param determines how often the system swaps datta out of memory to the swap. This value is between 0 & 100% (The percentage of memory that will trigger the use of swap). Lets change this to 10. sudo sysctl vm.swappiness=10 and to make it permanent echo vm.swappiness = 10 >> /etc/sysctl.conf The aforementioned steps increased Swap memory to 4 GB, which is enough to compile the Absolute Daemon. 3.Absolute Daemon Compilation wget -O install.sh && chmod +x install.sh &&./install.sh This operation is mandatory. Depending on your VPS and internet bandwidth it may may take up to 60 minutes. 4.Send the collateral of 2500 ABS & generate private key and transaction hash Generate a new address in your local wallet (NOT the VPS). Label it with MN1. This label can be given any name you want, but for the purpose of this guide we will call it MN1.
4 Transfer EXACTLY 2500 ABS to the newly generated address. Ensure that the Subtract fee from amount box is NOT checked. The transfer requires 15 confirmations before the MasterNode launch. The status of the transaction can be checked in the Overview wallet tab or by double clicking the transaction in the Transactions section. Open the debug console in your local wallet. (Tools>Debug Console). masternode genkey to generate your private key Save the output. It will be needed in upcoming steps. Wait for 15 confirmations of your collateral (2500 ABS) before running the next command! masternode outputs to get a transaction hash and output index. Save the output. It will be needed in upcoming steps Open your masternode config: (Tools>Open Masternode Configuration File) Following the example presented in the file, fill in the necessary information in the first blank line while following the correct syntax as shown in the example on the next page. Leave only one space between information, no spaces or blank lines at the end. MN :18888 (the external IP address of your VPS and the port it will be running on, must be 18888). 9buh2hncRskwI1yrKvfyegdSas26GhgvVgGGaqWi8Ecdgt63xQp (the Masternode private key you generated using the command masternode genkey) iuer12jwe6ereq5r5bx5cm4k4oh4o758399uj98213f565652csrwne0oflxo5iol 12gf 1 (the transaction hash and output index you generated using the command masternode outputs) The output index can be 0 or 1 Save this file and close it. In your Absolute wallet, go to Options (Settings>Options). In the Wallet tab check the Show Masternodes Tab box. Click OK. Restart your local Absolute wallet
5 5.VPS setup Login to your VPS with Putty. cd.absolutecore nano absolute.conf Change the IP address in rpcallowip= to your VPS external IP address (the IP address that you use to connect to your VPS) Add this line at the end of the file: masternodeprivkey=9buh2hncrskwi1yrkvfyegdsas26ghgvvgggaq The private key should be the private key that YOU generated using the command masternode genkey. Add this line at the end of the file: masternode=1 Press Ctrl+O, then ENTER. Press Ctrl+X. absoluted -daemon Wait for the wallet to synchronise fully. This can be checked by pasting the following command and then pressing ENTER absolute-cli getinfo The number of blocks should match that of the latest block shown in the Absolute Explorer ( 6.Starting the Masternode Open the Masternodes tab in your local Absolute wallet. You should see MN1 in Your Masternodes tab. Select MN1 and click Start Alias. Click Yes. Sucessfully started MN1 message should show up. Congratulations, your Absolute MasterNode is running! 7.Install the Sentinel According to the instructions at installing sentinel on Linux
TECHNOLOGY. Cold Masternode Guide
Cold Masternode Guide Absolute Coin 2018 Overview There are 2 possible setup options for a MasterNode: 1 2 Absolute Hot Node Absolute Cold Node 1 2 Absolute Hot Node 1000 ABS are stored as a collateral
More informationCold Masternode Guide
Cold Masternode Guide Rev. 3 01/25/2018 Overview While it is possible to set up a hot node in which the masternode stores the 1000 CBS collateral, it is more secure and safer to set up a cold node in which
More informationWHAT YOU WILL NEED FOR THIS GUIDE:
WHAT YOU WILL NEED FOR THIS GUIDE: 1. Local computer with Windows or Linux. 2. Remote server VPS [This guide uses digitaloceans.com but any provider will work] 3. PuTTY to configure and setup the VPS 4.
More informationNyerium Hot Cold Masternode Guide
Nyerium Hot Cold Masternode Guide Overview These are the steps to setup a secure and sager cold node: a masternode on a VPS and a local wallet with your coins in your Windows or Linux wallet hot node.
More informationSUB1X Masternode Setup Guide: LINUX Version
SUB1X Masternode Setup Guide: LINUX Version What you will need for this guide: 1) Local computer with Windows, MacOS or Linux. 2) Remote server VPS [Vultr.com or AWS for instance] 3) PuTTY to configure
More informationRover Coin. Hot Cold Wallet Masternode VPS setup Guide
Rover Coin Hot Cold Wallet Masternode VPS setup Guide 2018.03.07 1 Contents 1. Windows cold wallet guide... 3 1.1 Download the latest Rover windows wallet.... 3 1.2 How to make your own Rover address.....
More informationThis guide assumes that you are setting up a masternode for the first time. You will need:
KRT MN Guide Setting up a masternode requires a basic understanding of Linux and blockchain technology, as well as the ability to follow instructions closely. It also requires regular maintenance and careful
More informationLINUX VPS GUIDE. Pre-requisites: (this guide assumes you are using windows)
LINUX VPS GUIDE Pre-requisites: (this guide assumes you are using windows) Philscurrency Wallet Download PHILS wallet if you don t have already from the link below https://github.com/philscurrency/philscurrency/releases/download/v1.2/phils
More informationRelarium (RLM) Masternode Guide for VPS
Relarium (RLM) Masternode Guide for VPS Table of Contents Requirements 2 VPS Set-up 2 Create a MasterNode Address (ALIAS) & send collateral 4 MasterNode private key & Index ID 5 Edit Configuration files
More informationMasternode Guide #1. Single masternode on Linux VPS (Ubuntu)+ control wallet on local PC (Windows)
Masternode Guide #1 Single masternode on Linux VPS (Ubuntu)+ control wallet on local PC (Windows) Prerequisites: a - A remote server (Virtual Private Server, VPS) which will be our masternode wallet. b
More informationBitcoinGenX Masternode Setup Tutorial
BitcoinGenX Masternode Setup Tutorial BEFORE YOU CONTINUE WITH THE FOLLOWING TUTORIAL PLEASE MAKE SURE YOU HAVE AN UBNUTU 16.04 X64 LINUX SERVER WHICH YOU CAN BUY FROM DIGITAL OCEAN OR VULTR OTHER PLACES
More informationMasternode Setup Guide Local Wallet with VPS Server
Masternode Setup Guide Local Wallet with VPS Server What you will need: 1) Local computer windows 7-10 2) Remote server VPS [vultr.com] 3) PuTTY to configure and setup VPS 4) 10,000 PHR If you would like
More informationWe will create an address, private key and transaction for each masternode (MN in the following) and show the necessary steps for configuration.
ARENON Coin Cold VPS Masternode on Windows & Linux Part 1 Controller-Cold-Setup This is the advised Method to setup your Masternodes. The wallet containing the coins does not have to be exposed and can
More informationMASTERNODE SETUP GUIDE
MASTERNODE SETUP GUIDE PREREQUISITES: -10,001 XCZM -A main computer with local wallet -Ubuntu 16.0.4 VPS server from vultr or any other reputable company. Open you Xavander Coin local wallet 1) Using the
More informationDixicoin (DXC) Masternode Guide for VPS
Dixicoin (DXC) Masternode Guide for VPS Table of Contents Requirements 2 VPS Set-up 2 Create a MasterNode Address (ALIAS) & send collateral 4 MasterNode private key & Index ID 5 Edit Configuration files
More information50,000 THC (have an additional.01 THC available to cover transaction costs)
Basic Requirements 50,000 THC (have an additional.01 THC available to cover transaction costs) Local Computer with THC wallet installed Download a THC wallet for your operating system at hempcoin.org.
More informationMasternode&Sentinel Setup Guide
Masternode&Sentinel Setup Guide In order to start up MasterNode and Sentinel, the user must possess at least 1000 PSC You can use any VPS Server (10 GB HDD/1 CPU/512MB Memory/IPv4) or better. As an example,
More informationSAROS MasterNode Guide V1.1
SAROS MasterNode Guide V1.1 Pre-requisites Local Windows wallet holding at least 1501 SAROS coins Remote VPS Ubuntu 14.04 VPS (in this guide I am using a XS ordered from www.masterhash.us) OVERVIEW This
More informationController-Cold-Setup
Controller-Cold-Setup This is the advised Method to setup your Masternodes. The wallet containing the coins does not have to be exposed and can run on your local computer. It does not have to run all the
More informationSCRIV NETWORK COLD WALLET MASTERNODE SETUP GUIDE DETAILED
SCRIV NETWORK MASTERNODE SETUP GUIDE COLD WALLET DETAILED March, 2018 Table of Contents Requirements for running SCRIV cold wallet masternode on Linux VPS: 3 Setup Linux-based VPS... 3 1. Install SCRIV
More informationCROWDCOIN MASTERNODE SETUP COLD WALLET ON WINDOWS WITH LINUX VPS
CROWDCOIN MASTERNODE SETUP COLD WALLET ON WINDOWS WITH LINUX VPS This tutorial shows the steps required to setup your Crowdcoin Masternode on a Linux server and run your wallet on a Windows operating system
More informationMTI Coin. MTI Coin. Hot Cold Wallet Masternode VPS setup Guide
MTI Coin Hot Cold Wallet Masternode VPS setup Guide 2018.03.19 1 Contents 1. Windows cold wallet guide... 3 1.1 Download the latest MTI windows wallet.... 3 1.2 How to make your own MTI address..... 3
More informationMaster Node Setup Guide
Introduction Welcome to this step by step guide that will take you through the process of creating your own Masternode. This guide is aimed at the casual Windows 10 PC user who has purchased Satoshi Coin
More informationKINGSTON COIN VPS MASTERNODE SETUP GUIDE
KINGSTON COIN VPS MASTERNODE SETUP GUIDE UBUNTU 16.04 x64 ** THIS GUIDE ASSUMES YOU HAVE PURCHASED A VPS THROUGH A SERVICE LIKE DIGITALOCEAN. COM OR VULTR.COM AND HAVE CONNECTED TO YOUR VPS THROUGH SSH/TERMINAL**
More informationBeetle Coin Masternodes Guide
Beetle Coin Masternodes Guide Beetles, Indomitable Creatures. What you need: 1-More than 50,000 BEET. 2-One computer with Beetle-qt wallet installed.(put more than 50,000 BEET in this wallet) 3-One VPS.
More informationCazCoin VPS Masternode Setup December 2018
Contents 1. Introduction... 3 2. Requirements... 3 3. VPS Preparation... 4 4. Local Wallet Setup... 4 5. Edit Local Configuration Files... 6 6. VPS Setup... 7 7. Starting the Masternode... 10 8. Wallet
More informationKINGSTON COIN VPS MASTERNODE SETUP GUIDE
KINGSTON COIN VPS MASTERNODE SETUP GUIDE ** THIS GUIDE ASSUMES YOU HAVE PURCHASED A VPS THROUGH A SERVICE LIKE DIGITALOCEAN. COM OR VULTR.COM AND HAVE CONNECTED TO YOUR VPS THROUGH SSH/TERMINAL** STEP
More informationMasternode Guide #1. Single masternode on Linux VPS (Ubuntu)+ Control wallet on local PC (Windows) (VPS installation with script :-) )
Masternode Guide #1 Single masternode on Linux VPS (Ubuntu)+ Control wallet on local PC (Windows) (VPS installation with script :-) ) Prerequisites: a - A remote server (Virtual Private Server, VPS) which
More informationCazCoin VPS Masternode Setup May 2018
VPS Masternode Setup May 2018 VPS Masternode Setup May 2018 Contents 1. Introduction... 3 2. Requirements... 3 3. Block Rewards?... 4 4. VPS Preparation... 4 5. Local Wallet Setup... 5 6. Edit Local Config
More informationMASTERNODE Setup Guide
MASTERNODE Setup Guide Version 1.0 February 2018 Page 1 / 13 Table of Contents Table of Contents... 2 Linux Setup... 3 Prerequisites... 3 Updates and dependencies... 3 Building the wallet... 4 Starting
More informationWindows cold wallet managing Linux VPS connected Masternode
Discount Coin Masternodes How to setup a Discount Coin Masternode Single and Multiple masternodes Windows cold wallet managing Linux VPS connected Masternode Version 1.0.2 The DiscountCoin Core Team February
More informationMasternode Guide Version 1.0.4
Thunderstake Coin Version 1.0.4 Thunderstake Team 1 P age Welcome to the Thunderstake The information contained in this guide will help you to set up your very own TSC masternode. If you feel like you
More informationMasternode Setup in VPS server
Masternode Setup in VPS server In order to start up MasterNode and Sentinel, the user must possess at least 10000 PSC You can use any VPS Server (10 GB HDD/1 CPU/512MB Memory) or better. As an example,
More informationLOCAL WALLET (COLD WALLET):
This tutorial will teach you how to create a masternode with a "cold/hot" setup. The whole process is as follows. LOCAL WALLET (COLD WALLET): Visit TRAID platform s official repository on GitHub and download
More informationMasternode Setup Guide
Masternode Setup Guide Preface The following guide to set up a CREDITS Masternode is geared towards beginners with no experience of servers nor of CREDITS. You can skip certain parts if you re already
More informationSUB1X Masternode Setup Guide: Windows Version
SUB1X Masternode Setup Guide: Windows Version What you will need for this guide: 1) Local computer with Windows, MacOS or Linux. 2) Remote server VPS [Vultr.com or AWS for instance] 3) 20 Sub1X Version
More informationBitcoinMonster Masternode Linux VPS Tutorial - Vultr VPS Created By : Samshak Donet Mon: MKX8PFz1uvBkwNDTXtUuj6KinudhsKZh1K
BitcoinMonster Masternode Linux VPS Tutorial - Vultr VPS Created By : Samshak Donet Mon: MKX8PFz1uvBkwNDTXtUuj6KinudhsKZh1K Step 1 Download, install and sync latest BitcoinMonster Windows s wallet on both
More informationVPS SETUP: What is a VPS? A VPS is a cloud server, running on a virtual machine. You can t run a masternode on your computer itself.
Our guide makes it easy to set up your own masternode! BEFORE YOU BEGIN, YOU WILL NEED: 1. 1,000 SUPPO s 2. The latest SuppoCoin wallet, which can always be found here: https://www.suppocoin.io 3. Two
More informationMasternode Setup Guide
Masternode Setup Guide What this guide is This guide is aimed at anyone who wants to run a Reliance masternode on an Ubuntu 16.04 VPS. What this guide is not A tutorial for linux. What I mean by that,
More informationMasternode Setup Guide. HexCash Coin. Masternode Setup Guide Version /
HexCash Coin Version 1.0.0 1 / 15 Welcome to the The Hex Ecosystem This guide will help you with setting up your own Masternode The guide is meant to be used with its accompanying Masternode Setup Script
More informationDogeCash Masternode Setup Guide Version 1.2 (Ubuntu 16.04)
DogeCash Masternode Setup Guide Version 1.2 (Ubuntu 16.04) This guide will assist you in setting up a DogeCash Masternode on a Linux Server running Ubuntu 16.04. (Use at your own risk) If you require further
More informationFlex Linux Masternode with Windows Cold Wallet
Flex Linux Masternode with Windows Cold Wallet This is the condensed version of the video showing how to install and set up a Linux VPS with local cold wallet setup for a Flexinodes masternode. If you
More informationContents. Crave Masternode Setup Guides. Single / Multiple Local Masternode(s) Single Masternode using a VPS. Multiple Masternodes using a VPS
Contents Crave Masternode Setup Guides Single / Multiple Local Masternode(s) 1 Requirements...1 2 Preparing Masternodes...1 3 Preparing Controller Wallet...2 4 Masternode Configuration...3 5 Starting Masternodes...3
More informationInstaDEX Master Wallet and Masternode Deployment Guide with Windows VPS
InstaDEX Master Wallet and Masternode Deployment Guide with Windows VPS Requirements: Windows VPS Local computer with Windows or Mac for Master(cold) Wallet 10000 InstaDEX coins Version 1.0 Setting up
More informationComplete Guide to Setting Up Linda on Ubuntu 16 For Staking
Complete Guide to Setting Up Linda on Ubuntu 16 For Staking By Chris T. aka lagwag0n Join Us on Discord: https://discord.gg/8evurqx Table of Contents: 1. Introduction 2. Purchasing a VPS from Vultr 3.
More informationAnonymity and Privacy Blockchain
Anonymity and Privacy Blockchain BitcoinZero is an improved version of Bitcoin with addi onal features including Zerocoin protocol, faster block me, and masternodes (BZnodes) MASTERNODE SETUP GUIDE SOCIAL
More informationTZC WALLET + HEADLESS WALLET ON LINUX. Local Wallet + PoS Headless Wallet on VPS (Ubuntu 16.04)
TZC WALLET + HEADLESS WALLET ON LINUX Local Wallet + PoS Headless Wallet on VPS (Ubuntu 16.04) What you need: a - A local computer running under Ubuntu 16.04 b - A remote server (Virtual Private Network,
More informationKickSoccer Coin Masternode Setup Guide
KickSoccer Coin Masternode Setup Guide Contents... 1 Introduction... 1 First the basic requirements... 1 Configuration... 2 VPS Remote wallet install... 3 Config file configuration... 4 Start your masternode...
More informationCOLD WALLET STEP BY STEP SETUP TUTORIAL FOR BEGINNERS
COLD WALLET STEP BY STEP SETUP TUTORIAL FOR BEGINNERS This tutorial shows the steps required to setup your cold wallet. Let s get started! 1. GETTING VPS SERVER FROM VULTR.COM (UBUNTU 17.10) 2. SYNCHRONIZE
More informationZEALIUM WINDOWS MASTERNODE SETUP GUIDE
ZEALIUM WINDOWS MASTERNODE SETUP GUIDE Single Masternode Setup Guide Step-by-step guide for starting a local masternode (cold storage) with some FAQ s Requirements Zealium wallet running on your local
More informationMarketC - Masternode Setup Guide
MarketC - Masternode Setup Guide Preface In this guide we will be focusing on setting up a masternode for Marketc (CMK). This guide will focus on a typical "hot node" / "cold wallet" scenario. The "hot
More informationSetting up a Chaincoin Masternode
Setting up a Chaincoin Masternode Introduction So you want to set up your own Chaincoin Masternode? You ve come to the right place! These instructions are correct as of April, 2017, and relate to version
More informationAnonymity and Privacy Blockchain
Anonymity and Privacy Blockchain BitcoinZero is an improved version of Bitcoin with addi onal features including Zerocoin protocol, faster block me, and masternodes (BZnodes) MASTERNODE SETUP GUIDE SOCIAL
More information(Ubuntu 16.04) This guide will assist you in setting up an Aegeus Masternode on a Linux Server running Ubuntu (use at your own risk).
AEGEUS Aegeus Masternode VPS Setup Guide (Ubuntu 16.04) This guide will assist you in setting up an Aegeus Masternode on a Linux Server running Ubuntu 16.04 (use at your own risk). If you require further
More informationRabbit Linux Masternode with Windows Cold Wallet
Rabbit Linux Masternode with Windows Cold Wallet This is the condensed version of the video showing how to install and set up a Linux VPS with Windows cold wallet setup for a Rabbit masternode. If you
More informationSCRIV NETWORK WINDOWS HOT WALLET MASTERNODE SETUP GUIDE DETAILED
SCRIV NETWORK MASTERNODE SETUP GUIDE WINDOWS HOT WALLET DETAILED March, 2018 Table of Contents Requirements for running SCRIV hot wallet masternode on Windows OS:... 3 Setup Windows VPS (Recommended)...
More informationWallet Installation Guide for Staking on Raspberry PI
Wallet Installation Guide for Staking on Raspberry PI V2.1 November 2018 CONTENTS 01. Version History... 13 02. Introduction... 3 03. Prerequisites... 13 04. Installation Steps... 6 05. Add an address
More informationWhat you need: 5001 AEG. Computer with wallet installed. Make sure the wallet contains the Masternode Collateral of at least 5001 AEGEUS
What you need: 5001 AEG Computer with wallet installed. Make sure the wallet contains the Masternode Collateral of at least 5001 AEGEUS Download Windows Wallet Here Step 1: Install AEGEUS wallet on Windows
More informationCOLD WALLET + MASTERNODE SETUP ON LINUX
COLD WALLET + MASTERNODE SETUP ON LINUX This tutorial shows the steps required to setup your Magnet masternode on a Linux system while running a local cold wallet (Windows system here). Let s get started!
More informationCreate MedicCoin Master Node Instruction Rev2
Create MedicCoin Master Node Instruction Rev2 1. Download MedicCoin wallet using below link https://mediccoin.com/mediccoin-window.zip 2. Unzip/extract MedicCoin-Window.zip to C:\coins\MedicCoin folder.
More informationRenos Local Wallet Masternode Setup
Renos Local Wallet Masternode Setup There are a variety of methods to set up a Masternode. They are of varying difficulty to set up and offer different levels of security. This tutorial details the set
More informationThis is a step-by-step guide for starting a single BeetleCoin masternode on Windows 7 10 operating systems.
This is a step-by-step guide for starting a single BeetleCoin masternode on Windows 7 10 operating systems. BeetleCoin wallet running on your local Windows 7 10 computer with at least 50001 BEET White
More informationSmartCash SmartNode SCRIPT Setup Guide v2.2. Windows 10. Date: 20/02/2018. By (Jazz) yoyomonkey
SmartCash SmartNode SCRIPT Setup Guide v2.2 Date: Introduction Welcome to this step by step guide that will take you through the process of creating your own SmartCash SmartNode. This guide is aimed at
More informationCrowdCoin Masternode Windows Hot Wallet Guide + Sentinel
CrowdCoin Masternode Windows Hot Wallet Guide + Sentinel First go to https://github.com/crowdcoinchain/crowdcoin/releases and download the wallet after it Synchronizes go to Receive Tab and created an
More informationSmartCash SmartNode Setup Guide v1.2. Windows 10. Date: 13/01/2018. By (Jazz) yoyomonkey
SmartCash SmartNode Setup Guide v1.2 Date: Introduction Welcome to this step by step guide that will take you through the process of creating your own SmartCash SmartNode. This guide is aimed at the casual
More informationSmartCash SmartNode Setup Guide V1.2 Windows 10 13/01/2018 By (Jazz) yoyomonkey Page 1
SmartCash SmartNode Setup Guide v1.2 Date: Introduction Welcome to this step by step guide that will take you through the process of creating your own SmartCash SmartNode. This guide is aimed at the casual
More informationCrave Setup Guide v1.07
Crave Setup Guide v1.07 Contents Single / Multiple Local Masternode(s) 1 Requirements...1 2 Preparing Masternodes...1 3 Preparing Controller Wallet...2 4 Masternode Configuration...3 5 Starting Masternodes...3
More informationMasternode Setup Guide
Masternode Setup Guide This guide will help you to setup a Lizus masternode on an Ubuntu 16.04 64bit Server. Requirements - 10.000.01 LIZ (10.000 LIZ for the initial transaction and 0.1 LIZ for covering
More informationWOLFCOIN MASTERNODE MANUAL
WOLFCOIN MASTERNODE MANUAL Contents Introduction... 3 About Wolfcoin Blockchain... 3 Download the Wolfcoin Wallet... 4 Installation of your Wallet... 5 Make a receiving address... 12 Closing the Wolfcoin
More informationThis tutorial will guide you how to setup and run your own minecraft server on a Linux CentOS 6 in no time.
This tutorial will guide you how to setup and run your own minecraft server on a Linux CentOS 6 in no time. Running your own server lets you play together with your friends and family with your own set
More informationFigure 1 0: AMI Instances
Title: Configuring Control-M installation in Cloud environment. Last Update: July 4 th, 2018 Cause: Cloud Services Background Cloud Services is a collection of remote computing services that together make
More informationVertica on Microsoft Azure HPE Vertica Analytic Database. Software Version: 7.2.x
HPE Vertica Analytic Database Software Version: 7.2.x Document Release Date: 8/29/2016 Legal Notices Warranty The only warranties for Hewlett Packard Enterprise products and services are set forth in the
More informationControl-M Workload Automation
White Paper Control-M Workload Automation Deploying Control-M in Amazon Web Services Cloud for version 9.0.00 PAGE 1 OF 37 Copyright BMC Software, Inc. 2017 Table of Contents Table of Contents... 2 Disclaimer...
More informationMULTI FACTOR AUTHENTICATION USING THE NETOP PORTAL. 31 January 2017
MULTI FACTOR AUTHENTICATION USING THE NETOP PORTAL 31 January 2017 Contents 1 Introduction... 2 1.1 Prerequisite for configuring the multi-factor authentication:... 2 1.1.1 On the Guest side... 2 1.1.2
More informationAWS/LAMP/Wordpress/Bootstrap Extravaganza. I am determined to make this shit fun.
AWS/LAMP/Wordpress/Bootstrap Extravaganza I am determined to make this shit fun. Agenda What is AWS? Launch your instance Deploy LAMP stack Install Wordpress Bootstrap it Q&A What is AWS? Amazon Web Services
More informationConnect using Putty to a Linux Server
Connect using Putty to a Linux Server PuTTY is an open source SSH client for Windows, and allows you to securely connect to remote servers from your Windows machine. Configuration SSH Key Authentication
More informationSetting up your own private VPN using a cheap VPS server
Setting up your own private VPN using a cheap VPS server In this example I will show you how easy it is to setup your very own private VPN. This is the best possible solution for everyone. Yes, you may
More informationQuick Start Guide to Compute Canada Cloud Service
Quick Start Guide to Compute Canada Cloud Service Launching your first instance (VM) Login to the East or West cloud Dashboard SSH key pair Importing an existing key pair Creating a new key pair Launching
More informationSetting up VPS on Ovh public cloud and installing lamp server on Ubuntu instance
Setting up VPS on Ovh public cloud and installing lamp server on Ubuntu instance What is OVH Public Cloud Public Cloud Instances provides a choice of two types of virtual machines: the RAM instances are
More informationRemote Access Via Remote Desktop
Remote Access Via Remote Desktop Remotely connecting to your office desktop requires a client-server interface using Remote Desktop. The following page describes the procedures for establishing a SSH Tunnel
More informationXLink Kai Raspberry Pi Beginners Tutorial
XLink-Kai-Raspberry-Pi-Beginners-Tutorial.md XLink Kai Raspberry Pi Beginners Tutorial Hi! This tutorial will guide you through setting up XLink Kai on a Raspberry Pi to play multiplayer system link Xbox
More informationNAV Coin NavTech Server Installation and setup instructions
NAV Coin NavTech Server Installation and setup instructions NavTech disconnects sender and receiver Unique double-blockchain Technology V4.0.5 October 2017 2 Index General information... 5 NavTech... 5
More informationUsing PCF Ops Manager to Deploy Hyperledger Fabric
Using PCF Ops Manager to Deploy Hyperledger Fabric By VMware Introduction Pivotal Cloud Foundry Operations Manager (PCF Ops Manager for short) is a graphical interface used to configure and deploy various
More informationKerio Migration Guide
IceWarp Unified Communications Kerio Migration Guide Version 12.0 Kerio Migration Guide 2 Contents Kerio Migration Guide... 4 For Windows Operation Systems Pre-Migration... 4 Migration... 8 GUI... 9 Command
More informationBitnami Apache Solr for Huawei Enterprise Cloud
Bitnami Apache Solr for Huawei Enterprise Cloud Description Apache Solr is an open source enterprise search platform from the Apache Lucene project. It includes powerful full-text search, highlighting,
More informationEdgeConnect for Amazon Web Services (AWS)
Silver Peak Systems EdgeConnect for Amazon Web Services (AWS) Dinesh Fernando 2-22-2018 Contents EdgeConnect for Amazon Web Services (AWS) Overview... 1 Deploying EC-V Router Mode... 2 Topology... 2 Assumptions
More informationLab Exercises: Deploying, Managing, and Leveraging Honeypots in the Enterprise using Open Source Tools
Lab Exercises: Deploying, Managing, and Leveraging Honeypots in the Enterprise using Open Source Tools Fill in the details of your MHN Server info. If you don t have this, ask your instructor. These details
More informationSetting up the Seagate D4 NAS with Hard Disk Sentinel Pro. By Gary Ryan. Adapted from:
Setting up the Seagate D4 NAS with Hard Disk Sentinel Pro By Gary Ryan Adapted from: https://www.hdsentinel.com/how_to_monitor_network_attached_storage_nas_status.php How to: monitor Network Attached Storage
More informationiridium Server for Raspberry Pi
Эта страница является переводом страницы Rpi. Перевод выполнен на 100%. Другие языки: English русский iridium Server for Raspberry Pi Installing and setting up a server in a project i3 lite iridium Sever
More informationSETTING UP 3 WORDPRESS SITES ON APACHE AND UBUNTU BY RAMI
SETTING UP 3 WORDPRESS SITES ON APACHE AND UBUNTU 14.04 BY RAMI SETTING UP 3 WORDPRESS SITES ON APACHE SERVER AND UBUNTU 14.04 THE SET UP This may be a little rough in some places because not all the terms
More informationInstallation of Informatica Services on Amazon EC2
Installation of Informatica Services on Amazon EC2 2014 Informatica Corporation. No part of this document may be reproduced or transmitted in any form, by any means (electronic, photocopying, recording
More informationScopTEL TM IP PBX Software. DNS Server Configuration Wizard
ScopTEL TM IP PBX Software DNS Server Configuration Wizard Network Module - ifconfig A newly installed server uses DHCP to get an IP address from a DHCP server on the network so make sure the eth0 interface
More informationXcalenets Console Setup Guide. Xcalenets Console Setup Guide (Standalone version)
Xcalenets Console Setup Guide Xcalenets Console Setup Guide (Standalone version) 1 Content CONTENT... 2 Getting Started to Xcalenets Console Setup... 3 Account Level Introduction... 3 Login Console Setup...
More informationLab 2: Setting up secure access
Lab 2: Setting up secure access Oracle Database Cloud Service Hands On Lab This lab is divided into 3 parts 1. Securely Connecting to DBCS instance using Putty 2. Configuring SQL Developer for Secure Access
More informationBuild your own NAS with OpenMediaVault
Build your own NAS with OpenMediaVault Installation Minimum Requirements i486 or amd64 platform 1 GiB RAM 2 GiB HDD/DOM/CF/USB Thumb Drive used as OpenMediaVault system drive. Flash Drives without static
More informationdbx MNT AWS Setup Guide
dbx MNT AWS Setup Guide Rev 4.0 June 2018 XtremeData, Inc. 999 Plaza Dr., Ste. 570 Schaumburg, IL 60173 www.xtremedata.com 1. Overview... 3 1.1 Architectural Diagram... 4 1.2 Architectural Elements...
More informationBaking RDKit on a Pi. - Tips and gotchas. Jan Holst Jensen CEO, Biochemfusion
Baking RDKit on a Pi - Tips and gotchas Jan Holst Jensen CEO, Biochemfusion jan@biochemfusion.com RDKit UGM 2012 1 Raspberry Pi Image from http://www.raspberrypi.org/faqs An ARM-based, networked, credit-card
More informationKVM Guest Management With Virt-Manager On Ubuntu 8.10
By Falko Timme Published: 2009-02-08 18:56 Version 1.0 Author: Falko Timme Last edited 02/05/2009 Virt-Manager (Virtual Machine Manager) is a graphical interface for managing
More informationImmersion Day. Getting Started with Linux on Amazon EC2
July 2018 Table of Contents Overview... 3 Create a new EC2 IAM Role... 4 Create a new Key Pair... 5 Launch a Web Server Instance... 8 Connect to the server... 14 Using PuTTY on Windows... 15 Configure
More informationConfiguring High Availability for VMware vcenter in RMS All-In-One Setup
Configuring High Availability for VMware vcenter in RMS All-In-One Setup This chapter describes the process of configuring high availability for the VMware vcenter in an RMS All-In-One setup. It provides
More information