F-Cue Board Software Release Note for version

Transcription

1 F-Cue Board Software Release Note for version Rev /01/06 FUJITSU ELECTRONICS INC FUJITSU ELECTRONICS INC. 1/8

2 1. The contents of this document may be changed without prior notice. Please verify with our sales department if you need any assistance. 2. The data and circuits given in this document are merely examples of using the semiconductor device and are not intended for installation in equipment that actually used. Further, our company does not bear any liabilities whatsoever regarding any third patent right violations or other rights violations arising out of the use of these data and circuits. 3. Transferring or copying the contents of this document without prior written permission from our company is prohibited. 4. The semiconductor devices of our company are intended for use in standard applications (office equipment such as computer, OA, etc., equipment related to industrial, communication, measurement, equipment for personal or home use, etc.). Customers considering use in special applications (aircrafts, space, nuclear power control, life sustaining medical applications, etc.) such as in equipment wherein any fault or wrong operation of these semiconductors can directly cause a threat to human life, or is likely to cause damage to human body, or wherein extremely high reliability is required are requested to consult our sales department before using. 5. Failures of semiconductor devices occur at certain probabilistic rates. The customers are requested to carry out safety designs such as equipment redundancy design, fire spreading countermeasure design, overcurrent prevention countermeasure design, wrong operation prevention design, etc., so that, even if our company s semiconductior device fails, as a result human injury accidents, fire accidents, and accidents causing social damage do not occur. 6. When the product described in this document comes under the goods or technology restricted under the Foreign Exchange and Foreign Trade Act of Japan, permission from the concerned authority is required at the time of exporting this product FUJITSU ELECTRONICS INC. Printed in Japan 2/ FUJITSU ELECTRONICS INC.

3 Contents 1. Abstract Contents of the Package Documents Software (Linux-BSP) Restrictions Issues Known issues Fixed issues FUJITSU ELECTRONICS INC. 3/8

4 1. Abstract This document contains notes relating to the version of BSP (Board Support Package) for F-Cue Board. 4/ FUJITSU ELECTRONICS INC.

5 2. Contents of the Package 2.1. Documents Title File Name Version UsersManual F-Cue_LinuxBSP_UsersManual_V100E.pdf V1.00 QuickStartGuide F-Cue_QuickStartGuide_V100E.pdf V Software (Linux-BSP) Title File Name Version prebuild Linux image linaro-trusty-alip _msb7701_ tar.xz kernel patch msb7701-v3.10-delta patch u-boot patch msb7701-bsp-uboot-linaro-stable _ patch Notes - Serial console is UART channel 0. - PCIe bus driver only supports root mode. - USB driver for the micro USB connecter only supports Device mode FUJITSU ELECTRONICS INC. 5/8

6 3. Restrictions No. Function Description R big.little (IKS) IKS (In-kernel switcher) mode is not supported but HMP (Heterogeneous multi-processing) is, now. U-Boot notes The U-Boot for F-Cue does not support several commands which are shown in below (though these commands are displayed in the list by help command). Command mm mw nm Function memory modify (auto-incrementing address) memory write (fill) memory modify (constant address) Linux notes - SD/SDIO speed mode upto DDR50. - USB autosuspend is not allowed. (System suspends are still allowed.) - Wireless LAN region code is JP. - Linux reboot command is not available. 6/ FUJITSU ELECTRONICS INC.

7 4. Issues 4.1. Known issues No. Function Description Fixed issues No. Function Description Fixed Version FUJITSU ELECTRONICS INC. 7/8

8 Revision History Date Version Description 2017/01/ First Edition 8/ FUJITSU ELECTRONICS INC.