F-Cue Board Quick Start Guide

Transcription

1 F-Cue Board Quick Start Guide Rev /01/06 FUJITSU ELECTRONICS INC FUJITSU ELECTRONICS INC. 1/9

2 Warning 1. Bluetooth Qualification F-Cue Board is equipped with TAIYO YUDEN's module, WYSBHVGXG, certified Bluetooth authentication. The Linux BSP pre-installed in emmc memory doesn't include Bluetooth-profile and Bluetooth-protocol. Therefore, please obtain the profile and protocol that you need by yourself. If you are to manufacture and sell your products that use Bluetooth functions of F-Cue Board, you must join Bluetooth SIG and obtain Bluetooth Qualification. 2. HDMI Licenses If you are to manufacture and sell your products that use HDMI functions of F-Cue Board, you must obtain licenses with respect to HDMI functions from HDMI Licensing, LLC ( which administers HDMI licenses. 3. HDCP Licenses F-Cue Board does not support HDCP functions. If you need F-Cue Board to support HDCP functions, you must obtain licenses with respect to HDCP functions from Digital Content Protection, LLC ( which administers HDCP licenses. Please contact us for further information. 1. The contents of this document may be changed without prior notice. Please verify with our sales department if you need any assistance. 2. The data and circuits given in this document are merely examples of using the semiconductor device and are not intended for installation in equipment that actually used. Further, our company does not bear any liabilities whatsoever regarding any third patent right violations or other rights violations arising out of the use of these data and circuits. 3. Transferring or copying the contents of this document without prior written permission from our company is prohibited. 4. The semiconductor devices of our company are intended for use in standard applications (office equipment such as computer, OA, etc., equipment related to industrial, communication, measurement, equipment for personal or home use, etc.). Customers considering use in special applications (aircrafts, space, nuclear power control, life sustaining medical applications, etc.) such as in equipment wherein any fault or wrong operation of these semiconductors can directly cause a threat to human life, or is likely to cause damage to human body, or wherein extremely high reliability is required are requested to consult our sales department before using. 5. Failures of semiconductor devices occur at certain probabilistic rates. The customers are requested to carry out safety designs such as equipment redundancy design, fire spreading countermeasure design, overcurrent prevention countermeasure design, wrong operation prevention design, etc., so that, even if our company s semiconductior device fails, as a result human injury accidents, fire accidents, and accidents causing social damage do not occur. 6. When the product described in this document comes under the goods or technology restricted under the Foreign Exchange and Foreign Trade Act of Japan, permission from the concerned authority is required at the time of exporting this product FUJITSU ELECTRONICS INC. Printed in Japan 2/ FUJITSU ELECTRONICS INC.

3 Contents 1. Introduction Package Contents Getting Started Hardware Issues Known issues Fixed issues FUJITSU ELECTRONICS INC. 3/9

4 1. Introduction Thank you for buying F-Cue Board. This document is a User s Guide that describes the quick start of prebuild Linux kernel on F-Cue Board. 4/ FUJITSU ELECTRONICS INC.

5 2. Package Contents The following table is a composition list of this product. No. Name Model number Quantity Note 1 F-Cue Board MSB7701-C01 1 AC Adapter not included. 2 F-Cue Extension Board MSB7701-E01 1 Optional products. Prepare the following items. No. Name Note 1 AC Adapter Conform to the 96boards standard. 2 USB mouse and keyboard - 3 HDMI monitor and cable FUJITSU ELECTRONICS INC. 5/9

6 3. Getting Started The F-Cue Board ships with a default configuration for use. Please check following Switch. Switch name Default configuration BOOT SEL[4:1] 4:OFF, 3:OFF, 2:ON, 1:ON [emmc card boot] You can change the boot device for U-Boot by setting SW<BOOT SEL>. Boot device Note emmc OFF OFF ON ON Default setting micro SD card OFF ON ON ON - BOOT SEL O F F Power supply button Follow these steps to boot Linux on F-Cue Board. Connect the HDMI cable between the monitor and F-Cue Board. Connect the mouse and the keyboard to F-Cue Board.. Plug the supplied adapter into the DC-jack and a wall outlet. Turn on the Power supply button. 6/ FUJITSU ELECTRONICS INC.

7 At this point, Linux Kernel starts. After start completion, a Kernel prompt is indicated at HDMI monitor FUJITSU ELECTRONICS INC. 7/9

8 4. Hardware Issues 4.1. Known issues No. Function Description I Reset button Reset button is not available Fixed issues No. Function Description Fixed Version / FUJITSU ELECTRONICS INC.

9 Revision History Date Version Description 2017/01/ First Edition 2017 FUJITSU ELECTRONICS INC. 9/9