NGY 10GE FUSION LOAD MODULES

Transcription

1 NGY 10GE FUSION LOAD MODULES The architectural breakthrough of Ixia s 10 Gigabit Ethernet (10GE) NGY load modules delivers an industryleading, high-density, and affordable Layer 2-7, 10GE IP test solution. Under Ixia s Fusion program, FUSIONenabled NGY load modules are capable running IxN2X TM applications as well as IxNetwork TM, IxLoad TM, and other Ixia applications. This unprecedented cross-platform compatibility provides an extraordinary value proposition to existing IxN2X TM users in supporting both Ixia applications and the IxN2X application on a high density platform. Also, it allows the user-base presently employing IxN2X and Ixia chassis platforms to leverage their hardware across both. In conjunction with IxNetwork, IxLoad, and other Ixia applications, IxN2X provides support for a wide breadth of protocols and application testing. Ixia s 10GE NGY FUSION-enabled load module with 8 ports, a high-density IP test solution with seamless IxN2X application support HIGHLIGHTS Ability to run IxN2X, IxNetwork, IxLoad, and other Ixia applications on a single hardware platform Makes the existing IxN2X systems extensible with XM chassis, FUSIONenabled NGY load modules, and timing distribution module (TDM) Seamless IxN2X application support with no changes to APIs Comprehensive L2-7 testing Access to Ixia s superior L4-7 capability 2, 4, and 8 port variants Processor per port/user per port 512MB of capture memory 8-port 50% increase to N2X XR-2 4-port comparable to N2X XS-2 2-port comparable to N2X XS-2 Ixia s FUSION-enabled NGY load modules deliver high control-plane performance and scalability for both Layer 3 routing protocol emulation and upper Layers 4 through 7 stateful traffic testing. KEY FEATURES Ability to run IxN2X, IxNetwork, IxLoad, and other Ixia applications on a single hardware platform (requires compatible IxOS release version) Extend existing IxN2X systems with XM2 and XGS12-SD chassis, 1GE and 10GE FUSION-enabled load modules, and Timing Distribution Module (TDM) Rev K Page 1

2 Seamless IxN2X application support with no changes to APIs Comprehensive L2-7 testing Access to Ixia s superior L4-7 capability Award-winning, field-proven, high-density 10G hardware based on NGY family architecture 2, 4, and 8 port variants o LSM10GXM8S-NG (SFP+) o LSM10GXM4S-NG (SFP+) o LSM10GXM2S-NG (SFP+) Processor per port/user per port 512MB of capture memory Performance compared to legacy N2X modules: o 8-port 50% increase to N2X XR-2 o 4-port comparable to N2X XS-2 o 2-port comparable to N2X XS-2 SPECIFICATIONS FEATURE IXN2X MODE IXIA NATIVE MODE Load modules LSM10GXM8S-NG (SFP+) LSM10GXM4S-NG (SFP+) LSM10GXM2S-NG (SFP+) LSM10GXM8S-NG (SFP+) LSM10GXM4S-NG (SFP+) LSM10GXM2S-NG (SFP+) Number of ports per module 8 / 4 / 2 8 / 4 / 2 Number of chassis slots per module 1 1 Maximum ports per chassis XG12 rackmount XGS12-SD rackmount XGS12-HS rackmount XM2 Desktop XGS2-SD 3U XGS2-HS 3U Not supported Not supported Not supported Rev K Page 2

3 FEATURE IXN2X MODE IXIA NATIVE MODE Supported transceivers (optical and copper) Per-port CPU speed and memory SFP+ 800MHz /1GHz, 1GE SFP+ 800 MHz /1GHz, 1GE Per-port capture buffer 512MB 512MB Interface protocols 10GE LAN 10GE LAN/WAN Latency resolution 10ns 20ns Layer 2/3 routing protocol emulation Layer 4-7 application traffic testing Operating temperature range 41 F to 95 F (5 C to 35 C), ambient air APPLICATION SUPPORT IXN2X MODE IxN2X: Integrated L2-3 data/control plane performance and functional testing with synchronous Ethernet and routing/bridging protocol emulation *Note: The IxN2X application software is in the End-of-Life program and beyond the maintenance window. The last published version 7.60GA SP2 is available for download from Ixia s Support web portal. The matching IxOS version IxOS 6.80 EA SP1 is also required to run IxN2X 7.60GA SP2. Tcl API: Custom user script development for L2-7 testing IXIA NATIVE MODE IxExplorer TM : L2-3 wire-speed traffic generation and analysis including FCoE IxNetwork: Integrated L2-3 data/control plane performance and functional testing. Data center Ethernet (FCoE) and routing/bridging emulation includes: BGP4/4+, OSPFv2/v3, IS- ISv4/v6, RIP/RIPng, RSVP-TE, LDP, L2 MPLS VPNs, L3 MPLS VPNs, VPLS, IGMPv1/v2/v3, MLDv1/v2, PIM-SMv4/v6, STP, RSTP, EIGRP, and MSTP IxLoad: L4-7 performance testing for converged multiplay services and application delivery platforms Tcl API: Custom user script development for L2-7 testing Rev K Page 3

4 FUSION PROGRAM The following diagram shows how to extend IxN2X systems for use with Ixia chassis and FUSIONenabled load modules, as well as with Ixia native applications on the same setup, simultaneously (on separate modules). The TDM distributes timing and events: Acts as the timing master for all components Distributes events between Ixia chassis and IxN2X chassis Enables simultaneous operation of Ixia applications and IxN2X applications (not on the same module) Rev K Page 4

5 ORDERING INFORMATION Load Modules LSM10GXM8S-NG LSM10GXM8S-NG 10 Gigabit Ethernet FUSION Load Module, 8-Port LAN/WAN, SFP+ interface, Extra- Performance with 1GB RAM per port; Full L2/7 support for Ixia and IxN2X test software applications. The load module is compatible with these Ixia chassis in both the IxN2X mode and the Ixia native mode: XGS12-SD 12-slot, standard performance rack mount chassis bundle ( ), XG12 12-slot, rackmount chassis ( ) and the XM2-02 desktop chassis ( ). Additionally, this load module is compatible in the Ixia native mode with these chassis: XGS12-HS 12-slot, high-speed performance rackmount chassis bundle ( ), XGS2-SD 2-slot, 3RU standard performance chassis bundle ( ), and XGS2-HS 2-slot, 3RU high-speed performance chassis bundle ( ); REQUIRES one or more SFP+ transceiver options: GBASE-SR, SFP+10GBASE- LR, SFP+10GBASE-LRM, or SFP+10GSFP+Cu. Note: IxN2X software applications support 10Gb LAN mode only LSM10GXM4S-NG LSM10GXM4S-NG 10 Gigabit Ethernet FUSION Load Module, 4-Port LAN/WAN, SFP+ interface, Extra- Performance with 1GB RAM per port; Full L2/7 support for Ixia and IxN2X test software applications. The load module is compatible with these Ixia chassis in both the IxN2X mode and the Ixia native mode: XGS12-SD 12-slot, standard performance rack mount chassis bundle ( ), XG12 12-slot, rackmount chassis ( ) and the XM2-02 desktop chassis ( ). Additionally, this load module is compatible in the Ixia native mode with these chassis: XGS12-HS 12-slot, high-speed performance rackmount chassis bundle ( ), XGS2-SD 2-slot, 3RU standard performance chassis bundle ( ), and XGS2-HS 2-slot, 3RU high-speed performance chassis bundle ( ); REQUIRES one or more SFP+ transceiver options: GBASE-SR, SFP+10GBASE- LR, SFP+10GBASE-LRM, or SFP+10GSFP+Cu. Note: IxN2X software applications support 10Gb LAN mode only LSM10GXM2S-NG LSM10GXM2S-NG 10 Gigabit Ethernet FUSION Load Module, 2-Port LAN/WAN, SFP+ interface, Extra- Performance with 1GB RAM per port; Full L2/7 support for Ixia and IxN2X test software applications. The load module is compatible with these Ixia chassis in both the IxN2X mode and the Ixia native mode: XGS12-SD 12-slot, standard performance rack mount chassis bundle ( ), XG12 12-slot, rackmount chassis ( ) and the XM2-02 desktop chassis ( ). Additionally, this load module is compatible in the Ixia native mode with these chassis: XGS12-HS 12-slot, high-speed performance rackmount chassis bundle ( ), XGS2-SD 2-slot, 3RU standard performance chassis bundle ( ), and XGS2-HS 2-slot, 3RU high-speed performance chassis bundle ( ); REQUIRES one or more SFP+ transceiver options: GBASE-SR, SFP+10GBASE- LR, SFP+10GBASE-LRM, or SFP+10GSFP+Cu. Note, IxN2X software applications support 10Gb LAN mode only. Timing Distribution Device IxN2X Timing Distribution Module, standalone unit for Ixia XM2 ( ) and XG12 ( ) chassis to connect and synchronize up to eight (8) Ixia chassis to one or a stack of IxN2X chassis: IxN2X 2-slot portable ( ), IxN2X 4-slot chassis ( ), RoHS compliant; Includes one RJ-11 to dual-rj- 11 cable, USB cable, power supply, and one IxN2X rack-to-rack chassis synchronization cable, 3 meter length ( ) Rev K Page 5

6 IXIA WORLDWIDE HEADQUARTERS AGOURA RD. CALABASAS, CA (TOLL FREE NORTH AMERICA) (OUTSIDE NORTH AMERICA) (FAX) IXIA EUROPEAN HEADQUARTERS IXIA TECHNOLOGIES EUROPE LTD CLARION HOUSE, NORREYS DRIVE MAIDENHEAD SL6 4FL UNITED KINGDOM SALES (FAX) IXIA ASIA PACIFIC HEADQUARTERS 101 THOMSON ROAD, #29-04/05 UNITED SQUARE, SINGAPORE SALES (FAX) Rev K Page 6