VS8 Detector Set. Sensitive, fast MWIR set for <3.5 to 6+ microns with laboratory transimpedence preamplifer, DC to 5 MHz bandwidth.

Transcription

1 VS8 Detector Set Sensitive, fast MWIR set for <3.5 to 6+ microns with laboratory transimpedence preamplifer, DC to 5 MHz bandwidth. PVI-4TE-6-1x1 MIP-DC-5M-F-M8 PTCC-01-BAS

2 i VS8 Detector Set - (PVI-4-TE--1x1; MIP-DC-5M-F-M8, PTCC-01-BAS) Infrared detectors Photovoltaic detectors optically immersed PVI PVI series opt Detector type Cooling, operating temperature TK Optimal wavelength opt m Detectivity cm Hz D peak A R W Time constant ns Resistance optical area product R A Acceptance angle Optical area Package Window uncooled, BNC, no window two-stage TE-cooled Al 2 O 3 ZnSe AR coated PVI three-stage TE-cooled TO8, TO66 Al 2 O 3 ZnSe AR coated TE-cooled Al 2 O 3 ZnSe AR coated *) Other optimal wavelengths available upon request. **) Data sheet states minimum guaranteed D* values for each detector model. Higher performance detectors can be provided upon request. ***) Other optical areas available upon request. **** ) Other windows available upon request. 1 ) Optical area available only for uncooled detectors

3 Infrared detectors Spectral characteristics *) PVI PVI-2TE 1E+11 1E+10 1/2-1 m Hz W ] D* [c 3m 3.4m 4m 5m 6m 1E+12 1E+11 1/2-1 m Hz W ] D* [c 3m 3.4m 4m 5m 6m 1E+09 1E+10 8m 10.6m 2 1E+09 [m] 1E [m] 1E PVI-3TE PVI-4TE 1E+12 1E+11 1/2-1 m Hz W ] D* [c 3m 3.4m 4m 5m 6m 1E+12 1E+11 D*[cm Hz 1/2 W -1 ] 3m 3.4m 4m 5m 6m 1E+10 8m 10.6m 1E+10 8m 10.6m 1E+09 1E+09 [m] 1E [m] 1E * )

4 3.6. MIP 3 intended to operation with either biased or non-biased detectors. - Code description MIP - 1k - 100M - F - M4 VIGOpreamplifiertype MIP Lowcut-of f frequencyf DC k 10k lo[hz]: Highcut-of ffrequencyf hi[hz]: 100k 300k 1M 10M 20M 50M 100M 250M Package: F - withfan Mountinghole: M4 - M4 mounting hole M8 - M8x1 mounting hole see the preamplifier specification table for additional information Dimensions [mm] 1 2 TH2 3 4 V sup power supply input ( ) 5 GND power ground 6 sup 7 8 TH1 DATA data pin

5 type Main feature Detector package Detector type Detector cooling Radiator, cooling, TEC controlling Input noise density Input noise current density frequency VIP standalone BNC uncooled not needed 1) 1) DC, 10, 100, 1k, 10k 3 IP TO39 uncooled not needed 1) 1) DC, 10, 100, 1k, 10k QIP PCQ, PVQ, PVMQ uncooled radiator and TEC control ler, fan 1) 1) DC, 10, 100, 1k, 10k SIP OEM TO39 uncooled external heatsink needed 1) 1) DC, 10, 100, 1k, 10k FIP radiator, fan 1k, 10k MIP standard radiator, fan 1) 1) DC, 10, 100, 1k, 10k PIP programma ble radiator, fan DC/10 AIP TEC controller radiator and TEC controller, fan 1) 1) DC, 10, 100, 1k, 10k

6 frequency Transimpedance Output impedance Output Output supply supply current Supply connector Signal output 10M, 20M 5) 12) 6) 9) DB9 BNC 13) 10M, 100M, 200M 5) 6) 9) MMCX 3 10M, 100M 5) 6) 9) 4 MCX tunable 4) up to 5) 12) 6) 9) MMCX 13) 1G LEMO SMA ( DC monitor as an ) 5) 7) 8) 9) 12) 13) LEMO SMA digitally adjustable 2) 3) 9 (DC) LEMO SMA 5) 10) 6) 9) ) DC monitor as an )

7 PTCC-01 TEC controller Accessories PTCC-01 Programmable smart TEC controller 4 PTCC-01 is the programmable, precision, low noise, thermoelectric cooler controller, intended to operate with VIGO IR PTCC-01-OEM TE C controller with built-in power supply, without housing PTCC-01-BAS TEC controller with built-in power supply, encapsulated in a small package status LED indicator PTCC-01-ADV TEC controller with built-in power supply, encapsulated in a small package

8 Accessories Parameter Temperature stability [K] Temperature readout stability [mk] Detector temperature settling time [s] Value det det det det det det det det det det Maximum TEC current [A] Output voltage range [V] min 3, max 14.5 Output current of the built-in power supply [ma] Power supply voltage V sup [V] Power supply current I sup [ma] 500 TEC =0.45A, U TEC Series resistance of the connecting cable [m] Storage temperature [ C] Ambient temperature [ C] Relative humidity [%] Code description PTCC-01-BAS VIGO thermoelectric cooler controller Version: OEM - without package BAS - Basic - with package ADV - Advanced - with package, function buttons and LCD Dimensions [mm]

9 PTCC-01 TEC controller Accessories GND power ground 4 TH1 5 TH2 6 sup 7 FAN and programmable preamp internal logic auxiliary supply 8 DATA bidirectional data port sup metal cover GND-SH shield 1 TEC controller supply input 2 TECC GND TEC controller power ground GND power ground 4 TH1 5 TH2 6 sup 7 FAN and PIP preamp internal logic auxiliary supply 8 DATA bidirectional data port sup 10 GND-SH shield 1 error indicator 2 LED temperature control loop lock indicator 3 module power supply on indicator V auxiliary supply 5 6 GND 7