C-more 3 Micro-Graphic STN Touch Panel

Transcription

1 R 3 Micro-Graphic STN Touch Panel This Touch Screen version of the Micro-Graphic panel has a 3.1-inch STN LCD monochrome display. Model EA1-S3ML has five selectable LED-driven backlight colors: Green, Red, Amber, Yellow and Lime. It features a 128 x 64 dot display, and five userdefined function keys each with a user-defined red LED indicator. The panel can display up to 10 lines by 32 characters of static text and up to 10 lines by 21 characters of dynamic text with embedded variables and phrases mixed with graphics. It is rated NEMA 4/4X, IP-65 (when mounted correctly, for indoor use only). This Micro-Graphic panel can receive power from the serial communications port of most AutomationDirect s. An EA-MG-SP1 Serial Port with DC Power Adapter option module (/422/485) is required when using 3rd party s. Features Touch screen display Free downloadable programming software 128 x 64 Dot display with up to 10 lines by 32 characters of text and graphics Up to 10 lines by 21 characters of dynamic text with embedded variables and phrases mixed with graphics 5 programmable function keys can change with every screen. Can increment / decrement values, trigger recipes, view index of screens. 5-Color LED backlight for longer lifetime; Green, Red, Amber, Yellow and Lime 2 optional snap-on keypad bezels 768 KB memory Panel is powered from comm port when using select AutomationDirect s. Use optional DC power adapter and serial port modules if needed for other s (/422/485) Built in Alarm Control setup that activates beep, backlight flash, customized alarm banner, and LED blinking 0 to 50 C (32 to 122 F) operating temperature range (IEC ) NEMA 4/4X, IP-65 compliant when mounted correctly, indoor use only UL, cul & CE agency approvals 2-year warranty from date of purchase NOTE: Don t forget the optional keypad bezels, DC power adapter and serial port with DC power adapter shown in the accessories. Panel Cutout Dimensions Panel Thickness Part No. EA1-S3ML C <---> UL US Overview DL05/06 Field I/O Software HMIs Other HMI AC Drives Motors Steppers/ Servos Motor Controls Proximity Photo Limit Switches Encoders Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Circuit Protection NOTE: The 3 Micro-Graphic cutout dimensions are not equivalent to previous AutomationDirect text panels. The Micro-Graphic panels will not fit in cutouts for DV-1000, EZText or Optimate panels. Enclosures Appendix Part Index Operator Interface B10 11

2 R 3 Micro-Graphic STN Touch Panel This Touch Screen version of the Micro-Graphic panel has a 3.1-inch STN LCD monochrome display. Model EA1-S3MLW has five selectable LED-driven backlight colors: White, Pink1, Pink2, Pink3 and Red. It features a 128 x 64 dot display, and five userdefined function keys each with a user-defined red LED indicator. The panel can display up to 10 lines by 32 characters of static text and up to 10 lines by 21 characters of dynamic text with embedded variables and phrases mixed with graphics. It is rated NEMA 4/4X, IP-65 (when mounted correctly, for indoor use only). This Micro-Graphic panel can receive power from the serial communications port of most AutomationDirect s. An EA-MG-SP1 Serial Port with DC Power Adapter option module (/422/485) is required when using 3rd party s. Part No. EA1-S3MLW Features Touch screen display Free downloadable programming software 128 x 64 Dot display with up to 10 lines by 32 characters of text and graphics Up to 10 lines by 21 characters of dynamic text with embedded variables and phrases mixed with graphics 5 programmable function keys can change with every screen. Can increment / decrement values, trigger recipes, view index of screens. 5-Color LED backlight for longer lifetime; White, Pink1, Pink2, Pink3 and Red 2 optional snap-on keypad bezels 768 KB memory Panel is powered from comm port when using select AutomationDirect s. Use optional DC power adapter and serial port modules if needed for other s (/422/485) Built in Alarm Control setup that activates beep, backlight flash, customized alarm banner, and LED blinking 0 to 50 C (32 to 122 F) operating temperature range (IEC ) NEMA 4/4X, IP-65 compliant when mounted correctly, indoor use only UL, cul & CE agency approvals 2-year warranty from date of purchase Dimensions C UL <---> US NOTE: Don t forget the optional keypad bezels, DC power adapter and serial port with DC power adapter shown in the accessories. Panel Cutout Panel Thickness NOTE: The 3 Micro-Graphic cutout dimensions are not equivalent to previous AutomationDirect text panels. The Micro-Graphic panels will not fit in cutouts for DV-1000, EZText or Optimate panels. B10 12 Operator Interface

3 3 Micro-Graphic Specifications Specification Model 3 STN Micro-Graphic Panel Touch Screen 3 STN Micro-Graphic Panel Non-Touch Screen Part Number EA1-S3ML, EA1-S3MLW EA1-S3ML-N, EA1-S3MLW-N Description Display Type Resolution Color Viewing Area Size Active Area Size Contrast Backlight Type Touch Screen Features Viewing Angle Color Screen Objects User Replaceable 128 x 64 dots LCD display, five user defined keypad function buttons, and five user defined LED's 3.1" STN monochrome LCD, graphical characters 128 (W) x 64 (H) dots 2 colors (normal / inverse) (W) x (H) [70.8 mm x 35.2 mm] (W) x (H) [67.8 mm x 32.0 mm] Adjusted from the panel s built-in configuration setup menu 3, 9 o clock axis > 45 degrees 6 o clock axis > 45 degrees 12 o clock axis > 30 degrees LED 5 user defined colors: EA1-S3ML, EA1-S3ML-N - Red, Green, Amber, Lime, and Yellow EA1-S3MLW, EA1-S3MLW-N - White, Pink1, Pink2, Pink3 and Red Type Analog touch panel N/A Operation 51 gram force [0.5 N] maximum N/A Life Minimum of 1,000,000 cycles N/A User Memory Number of Screens Beep (Internal) Keypad Function Buttons Keypad Function Button LEDs Serial Communications Expansion Connection Functional Devices Static Shapes Displayable Fonts No 768 KB Up to 999 limited by project memory usage Yes Five user defined function key buttons with the ability to customize the label. Minimum of 500,000 cycles Each function key button includes a red LED that can be user programmed. Built-in RJ12 serial communications port (). Optional serial communications port (, RS-485/422) when using the optional EA-MG-SP1 Serial Port with DC Power Adapter. Yes used with optional Keypad Bezels, EA-MG-BZ1 & BZ2, and EA-MG-P1 DC Power Adapter, and EA-MG-SP1 Serial Port with DC Power Adapter. Push Button, Switch, Indicator Button, Indicator Light, Graphic Indicator Light, Numeric Display, Numeric Entry, Inc/Dec Value, Bar Graph, Bitmap Button, Static Bitmap, Dynamic Bitmap, Recipe Button, Static Text, Lookup Text, Dynamic Text, Scroll Text, Screen Change Push Button, Screen Selector, Adjust Contrast, Function, Key Configuration Object, Realtime Graph, Line Graph, Analog Meter Lines, Rectangles, Circles and Frames Fixed fonts: 6x6, 6x8, 8x16, 16x16, 32x16, 32x32 / Windows fonts 3 Micro-Graphic panel specifications continued on next page. Overview DL05/06 Field I/O Software HMIs Other HMI AC Drives Motors Steppers/ Servos Motor Controls Proximity Photo Limit Switches Encoders Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Circuit Protection Enclosures NOTE: Photo includes EA-MG-BZ2 Appendix Part Index Operator Interface B10 15

4 3 Micro-Graphic Specifications Model 3 STN Micro-Graphic Panel 3 STN Micro-Graphic Panel Specification Touch Screen Non-Touch Screen Part Number EA1-S3ML, EA1-S3MLW EA1-S3ML-N, EA1-S3MLW-N Electrical Input Voltage Range Input Power Power Consumption Recommended Fuse Maximum Inrush Acceptable External Power Drop Duration Environmental Operating Temperature Storage Temperature Humidity Environmental Air 5.0 VDC ( VDC) Supplied through the panel s RJ12 serial communications port connection when used with any AutomationDirect having an RJ12 communication port. Can also be supplied from an external VDC power source when using the optional EA-MG-P1 DC Power Adapter, or the optional EA-MG-SP1 Serial Port with DC Power Adapter VDC (210 ma) Type AGC fast acting glass fuse, 250 ma, 250 VAC, ADC p/n AGC-25 No fuse required when directly connected to a or PC with recommended cable. 1 A for 500 µs Maximum 1 ms 0 to 50 C (32 to 122 F) 20 to +60 C ( 4 to +140 F) 5 95% RH (non-condensing) No corrosive gases permitted Vibration IEC (Test Fc), 5-9 Hz: 3.5 mm amplitude, Hz: 1.0G, sweeping, at a rate of 1 octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes Shock IEC (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction per axis, on 3 mutually perpendicular axes (total of 18 shocks) NEMA ICS3-304 Noise Immunity RFI, (145 MHz, 440 Mhz cm) Impulse µs pulse Enclosure NEMA 4/4X, IP-65 (When mounted correctly, for indoor use only.) Agency Approvals CE (EN ), UL508, CUL Canadian C22.2 No. 142-M95, UL File E Physical Dimensions (W) x (H) x (D) [114.0 mm x 82.0 mm x 40.5 mm] Enclosure Mounting [1 5 mm] Thickness Range Mounting Clip Screw oz-in [ Nm] Torque Range Depth from bezel rear [58.3 mm] with options Module Weight 5.82 oz. (165 g) NOTE: The environmental specifications for the panels shown above are also applicable for the Micro-Graphic accessories shown later in this section of the catalog. NOTE: Photo includes EA-MG-BZ2 B10 16 Operator Interface

5 KOYO ELECTRONICS INDUSTRIES CO., LTD. KOYO ELECTRONICS INDUSTRIES CO., LTD. 6 Micro-Graphic Panel Accessories D-SUB 15-pin 90-degree Communication Port Adapter The EA-ADPTR-4 adapter plugs into the 15-pin serial port on the rear of the 6 panel to allow a communication cable to be plugged in at a 90 degree angle to reduce panel depth requirements. 15-pin straight through pin-out. UL Recognized. Part No. EA-ADPTR-4 Dimensions Units: inches [mm] [8.5] Overview DL05/06 Field I/O [40.8] Date code Country of Origin EA-ADPTR-4 IOIOI Software HMIs [47.6] [20.2] R Other HMI <---> AC Drives Motors D-SUB 15-pin to Terminal Block Adapter The EA-COMCON-3 adapter plugs into the 15-pin serial port on the rear of the 6 panel to allow wire terminal connections for an /RS-485/DH-485 communication cable. UL Recognized. Part No. EA-COMCON-3 Dimensions Units: inches [mm] [19.1] [17.5] Steppers/ Servos Motor Controls Proximity Photo Limit Switches Encoders Pushbuttons/ Lights [44.6] Date code Country of Origin EA-COMCON-3 GND SD SD+ RD RD+ TERM Process Relays/ Timers Comm [47.6] [28.6] R TB s & Wiring <---> Terminals GND SD SD+ RD RD+ TERM [22.9] Power Circuit Protection Enclosures Appendix Part Index Operator Interface B10 47

6 6 Micro-Graphic Panel Accessories Clear Screen Overlay Optional clear screen overlay used to protect 6 Micro-Graphic displays from minor scratches and wear. Package contains 3 clear screen overlays. Part No. EA-6-COV2 Dimensions [124.8] [5.0] EA-6-COV [4.0] <---> [96.4] Clear Screen Overlay Installation Step 1 Step 2 Remove the overlay from the package Remove the paper backing from the overlay Step 3 Step 4 Align the overlay with the screen and press the adhesive firmly into place Remove the protective film* *Note: The overlay cover ships with a thin protective film on the face that should be carefully removed after installation. B10 48 Operator Interface

7 3 Micro-Graphic Connections Cabling requirements When using the built-in RJ12 serial port on the Micro-Graphic panel to connect with the CLICK, DL05, DL06,,, D3-350 and CPUs, your cabling choices are fairly simple. connects to CLICK, DL05, DL06,,, D3-350 and D4-450 phone jack. connects to all CPU 15-pin ports. A maximum cable length of 10 feet between the Micro-Graphic panel and the is recommended when powering the panel from the. The Serial Port with DC Power Adapter module, EA-MG-SP1, can be used if the application requires the use of or RS-485. The serial port on the adapter, designated as port 2, can also be wired for. The use of the adapter permits greater cable length distances. See the Communication Protocols & Cabling Charts in this catalog section for details on the selection of various s, protocols, and connectivity. Protocols AutomationDirect CLICK (Modbus) DirectLOGIC DirectNET Modbus (Koyo Addressing) Entivity DF1 Half Duplex DF1 Full Duplex 5 DF1 DH485 GE Fanuc SNPX (90/30, 90/70, Micro 90, VersaMax Micro) Omron Host Link (C200 Adapter, C500) Omron FINS Serial (CJ1, CS1) Mitsubishi Melsec FX Mitsubishi Q and QnA Siemens PPI Micro-Graphic to DL-205 serial cable p/n DL-06 Micro-Graphic to CLICK CLICK Port 1 serial cable p/n serial cable Port 1 3 Inch Micro-Graphic Panel Micro-Graphic to DL06 Micro-Graphic Panel Micro-Graphic to DL06 Serial Port w/ DC Power Adapter EA-MG-SP1 Micro-Graphic Panel DL-06 Port 2 Port 2 to VGA 15-pin port serial cable p/n -1 Micro-Graphic Panel B10 18 Operator Interface

8 3 Micro-Graphic Communication Protocols & Cabling Chart Family CLICK DL05 (see D0-DCM under DL06) DL06 CPU all versions all versions all versions D0-DCM all versions D2-230 D2-240 D D2-260 D2-DCM WIN Port & Type DB15HD DB15HD DB15HD DB15HD Compatibility & Connection Chart Port Powered Powered with 5 VDC from the connected s comm. port. Micro-Graphic Panel Panel to Cabling Components Required for Specific Port and Protocol being used. DC Power Adapter Powered from an external 24 VDC source using the DC Power Adapter, EA-MG-P1. Using panel s RJ12 port 1 Using panel s RJ12 port 1 Using panel s RJ12 port 1 Automation Direct Modbus (CLICK) Automation Direct Modbus (CLICK) Serial Port with DC Power Adapter Powered from an external 24 VDC source using the Serial Port with DC Power Adapter, EA-MG-SP1. Automation Direct Modbus (CLICK) Using adapter s serial 15-pin D-sub - female Automation Direct Modbus (CLICK) -1 RS-485 Modbus only -1 RS-485 Modbus only -1-1 RS-485 Modbus only Note: See the Micro-Graphic Hardware User Manual, Chapter 6: Communications, for wiring diagrams that the user can use to construct their own cables. Available for download at Compatibility & Connection Chart continued on next page. Overview DL05/06 Field I/O Software HMIs Other HMI AC Drives Motors Steppers/ Servos Motor Controls Proximity Photo Limit Switches Encoders Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Circuit Protection Enclosures Appendix Part Index Operator Interface B10 19

9 3 Micro-Graphic Communication Protocols & Cabling Chart (cont d) Family CPU D3-330 or D3-340 D3-340 D3-350 D3-DCM D3-350 only D4-430 D4-440 D4-450 Port & Type D3-232-DCU D3-422-DCU RJ11-4 pin RJ11-4 pin Port 0 DB 15 pin Port 0 DB 15 pin Port 0 DB 15 pin Port 3 Compatibility & Connection Chart Port Powered Powered with 5 VDC from the connected s comm. port. Micro-Graphic Panel Panel to Cabling Components Required for Specific Port and Protocol being used. DC Power Adapter Powered from an external 24 VDC source using the DC Power Adapter, EA-MG-P1. Using panel s RJ12 port 1 Using panel s RJ12 port 1 Using panel s RJ12 port 1 Serial Port with DC Power Adapter Powered from an external 24 VDC source using the Serial Port with DC Power Adapter, EA-MG-SP1. Using adapter s serial 15-pin D-sub - female or or or OP-3CBL-1 or or or OP-3CBL-1 or or or EA-3CBL EA-4CBL-1 EA-4CBL-1 EA-4CBL-1 D4-DCM Note: See the Micro-Graphic Hardware User Manual, Chapter 6: Communications, for wiring diagrams that the user can use to construct their own cables. Available for download at Compatibility & Connection Chart continued on next page. B10 20 Operator Interface

10 3 Micro-Graphic Communication Protocols & Cabling Chart (cont d) Family MicroLogix SLC500 ControlLogix CompactLogix FlexLogix 5 GE Mitsubishi Omron Modicon Siemens CPU 1000, 1100, 1200, /03, 5/04, 5/05 5/01, 5/02, 5/03 all all all all 90/30, 90/70 Micro 90, VersaMax Micro Melsec FX Series Q / QnA C200 (Adapter), C500 CJ1, CS1, CQM1, CPM1, CPM2, C CPU, Quantum 113 CPU, AEG Modicon Micro Series 110 CPU S7-200 CPU Port & Type 8-pin mini-din port RJ45 8-pin phone plug RJ45 8-pin phone plug 25-pin RJ45 8-pin phone plug 15-pin RJ45 15-pin 25-pin 8-pin mini-din port 6-pin mini-din port 25-pin varies 0 or 1 Port Powered Powered with 5 VDC from the connected s comm. port. Compatibility & Connection Chart Micro-Graphic Panel Panel to Cabling Components Required for Specific Port and Protocol being used. DC Power Adapter Powered from an external 24 VDC source using the DC Power Adapter, EA-MG-P1. Using panel s RJ12 port 1 Using panel s RJ12 port 1 Using panel s RJ12 port 1 Serial Port with DC Power Adapter Powered from an external 24 VDC source using the Serial Port with DC Power Adapter, EA-MG-SP1. Using adapter s serial 15-pin D-sub - female DF1 Full Duplex DF1 Half Duplex DH485/AIC/AIC+ DF1 Full Duplex DF1 Half Duplex DH485/AIC/AIC+ DF1 Full Duplex DF1 Half Duplex DF1 Full Duplex DF1 Half Duplex DF1 Full Duplex DF1 Half Duplex EA-MLOGIX-CBL EA-DH485-CBL EA-SLC-232-CBL EA-DH485-CBL EA-SLC-232-CBL EA-SLC-232-CBL EA-SLC-232-CBL DF1 Full Duplex EA CBL DH485/AIC/AIC+ SNPX CPU Direct Q / QnA Host Link FINS EA-DH485-CBL EA CBL EA CBL EA-MITSU-CBL EA-MITSU-CBL-1 EA-OMRON-CBL Note: See the Micro-Graphic Hardware User Manual, Chapter 6: Communications, for wiring diagrams that the user can use to construct their own cables. Available for download at Available cables with descriptions shown on the next page. PPI RS-485 Overview DL05/06 Field I/O Software HMIs Other HMI AC Drives Motors Steppers/ Servos Motor Controls Proximity Photo Limit Switches Encoders Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Circuit Protection Enclosures Appendix Part Index Operator Interface B10 21