CHAPTER ACCESSORIES. In This Chapter...

Transcription

1 ESSORIES HPTER In This hapter... ccessories more Micro-Graphic Programming Software US to RS- Programming able ssembly utton Landscape (Horizontal) Keypad ezel utton Portrait (Vertical) Keypad ezel SU -pin 0-degree ommunication Port dapter SU -pin to Terminal lock dapter lear Screen Overlay

2 hapter : ccessories ccessories Part Number E-MG-PGMSW E-MG-PGM-L Part Number E-MG-Z E-MG-ZP E--OV Micro-Graphic Programming Software & Programming able escription -more Micro-Graphic panel Windows-based configuration software. Requires Windows 000 with Service Pack, XP Home or Professional with Service Pack or Windows Vista. Requires US port connection from P to touch panel. Includes -ROM. Programming cable (E-MG-PGM-L) sold separately. ownloadable version available from the Web site at no charge. Software Help Files included in download. -ft. cable assembly to connect personal computer to any -more Micro-Graphic panel for setup and programming. (Note: This cable assembly uses the P's US port and converts the signals to serial transmissions. The US port supplies V to the Micro-Graphic panel for low-power mode configuration operations). ssembly includes standard US -type connector to -type connector cable, custom converter, and an RS cable with RJ modular connector on each end. Micro-Graphic Panel ccessories escription For Landscape (Horizontal) Mounted Panels. 0-button keypad bezel with numeric keypad for -more Micro-Graphic panels, arrow adjust keys, and ESPE, MENU, LER and ENTER buttons. Helps to reduce screen wear in heavy-duty applications where operators can use the keypad to enter numeric data. esigned for easy drop-in of the Micro-Graphic panels. For Portait (Vertical) Mounted Panels. -button keypad bezel with numeric keypad for -more Micro-Graphic panels, arrow adjust keys, and ESPE, MENU, LER and () ENTER buttons. Helps to reduce screen wear in heavy-duty applications where operators can use the keypad to enter numeric data. esigned for easy drop-in of the Micro-Graphic panels. Optional clear screen overlay used to protect -more Micro-Graphic displays from minor scratches and wear. Package contains clear screen overlays. E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/

3 -more Micro-Graphic Programming Software -more Micro-Graphic Programming Software is a spin-off of its powerful sibling -more Touch Panel programming software. It offers very high end features designed to reduce your configuration time. Simply drag and drop the objects from the object bar (right side of screen) onto the the screen construction area. Then configure your PL tags and click on the objects you wish to use. Use the built-in simulator to review your work on your P before ever downloading your project! NOTE: Software and Firmware Version.0 or later is required with models E-SML and E-SMLW. vailable for free download at NOTE: -more Micro-Graphic panels with hardware version R0 and higher must use firmware version.0 or higher. See hapter for details. Thumbnail project preview pane Helps keep track of multi-screen projects. uilt-in user object/screen libraries Save time by re-using your custom objects and screens. Scrolling object selection window Lets you find the object you want fast. Just drag and drop it on the screen. Scrolling help window Gives you helpful information on each object uilt-in project simulator Runs your project on your P Test all of your screens before downloading Time savings pays for the panel P Requirements: Following are the minimum system requirements for running -more Micro-Graphic Programming Software, E-MG-PGMSW, on a P: Operating System - Windows XP Home / Professional Edition Service Pack, Windows 000 with Service Pack, Windows Vista ( and bit), Windows ( and bit), Windows ( and bit) Keyboard and Mouse or compatible pointing device Super VG color video adapter and monitor with at least 00 x 00 pixels resolution ( x pixels recommended) K color minimum M free hard-disk space M free RM ( M recommended); M free RM (G recommended) for Vista -ROM or V drive for installing software from the, or internet access to download free programming software US port to use with an E-MG-PGM-L, US to RS Programming able ssembly for project transfer from the programming software to the panel E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/ hapter : ccessories

4 hapter : ccessories Micro-Graphic Programming Software (cont d) -more Micro-Graphic Panel Objects Object Graphic Object Graphic The Line object, just like with drawing tools, allows the user to insert a straight line drawing into a project. When a Line is inserted into a project, a window opens to allow the user to setup all available parameters for the Line object. Some of the uses for Line Objects include but are not limited to adding callouts, pointers, or indicators. The Rectangle object, just like with drawing tools, allows the user to insert a drawing of a Rectangle as well as other geometric shapes into a project. When this object is inserted into a project, a window opens to allow the user to setup all available parameters for the Rectangle object. The ircle object, just like with drawing tools, allows the user to insert a drawing of a ircle or ellipse shape into a project. When this object is inserted into a project, a window opens to allow the user to setup all available parameters for the ircle object. The Frame object allows the user to insert a Frame to the project that can be used to Frame other objects. Some of the uses for Frame object include but are not limited to graphically separating objects for different operations that may appear on one screen and emphasizing pushbuttons or other objects that may require more attention by the operator. The Pushbutton object is available from the utton ategory of the Object List window. The Pushbutton object is an electronic version of a typical Pushbutton normally found on control panels. The Pushbutton object can be used to activate or deactivate components assigned to a iscrete Tag Name. The Switch object is an electronic version of a typical Switch that normally can be found on control panels. The Switch object can be used to activate or deactivate components assigned to a iscrete Tag Name. The Indicator utton object is available from the utton ategory of the Object List window. The Indicator utton object is an electronic version of a typical Indicator utton normally found on control panels. The Indicator utton is a combination of a Pushbutton and an Indicator Light. The Indicator utton can be used to activate or deactivate components assigned to a iscrete Tag Name. The Indicator Light object is an electronic version of a typical Indicator Light normally found on industrial control panels. The Indicator Light can be configured to display the status of the assigned iscrete Tag Name. The Graphic Indicator Light object is a more enhanced version of the Indicator Light Object that allows the user to choose more detailed graphics to display the status of a tag. This object is an electronic version of a typical Indicator Light normally found on industrial control panels. The Indicator Light can be configured to display the status of the assigned iscrete Tag Name. The Numeric isplay consists of a frame that displays a real-time numeric value according to the value of data received from an assigned Tag Name. The Numeric isplay supports numeric Signed ecimal, Unsigned ecimal,, and Floating Point data types with up to digits, including decimal point. User efined lpha Numeric Prefix and Suffix values are also supported. The Numeric Entry object is used to enter a value from your Panel to a PL Register. This object, when selected, opens a Numeric Keypad that allows the user to enter a new value that will be written to the assigned Tag Name. The Numeric Entry supports numeric Signed ecimal, Unsigned ecimal,, and Floating Point data types with up to digits, including decimal points. User efined lpha Numeric Prefix and Suffix values are also supported. The Increment/ecrement Value object is used to add or subtract a value by pressing a button on the Panel. asically the object uses two Tags, one to read a value from and another to write a modified value to. The Increment/ecrement Value supports numeric Signed ecimal, Unsigned ecimal,, and Floating Point data types with up to digits, including decimal points. The Increment and decrement values are also user selectable. The Real Time Graph object displays the value stored in up to two PL tags, over a history of up to points each. One point is added at each refresh. The Line Graph object displays the values of up to PL address points. Up to two address arrays can be displayed. The line is drawn in its entirety at each refresh. The nalog Meter object is used to display the current value of a Tag Name. The ar Meter object is used to monitor up to two assigned Tag Names continuously. This object has various appearances depending upon the relative value of the tags. The ar Meter can be used to create digital versions of level, current, and flow meters to name a few samples, or gauges that measure speed and other measurable data. The itmap utton object offers the ability to use a itmap graphic to perform the functions of a utton. This allows users to create their own graphics and implement them within the software project. The itmap utton object can be used to activate or deactivate components assigned to a iscrete Tag Name. The -more Micro-Graphic display only supports two colors, black and white. The Static itmap offers the ability to display a itmap graphic on any screen. The Static itmap does not change state. Refer to the ynamic itmap Object if you require the graphic object to change state based on a Tag Value in your PL. The dialog box for a "Static itmap" object allows you to "read from disk" and select a graphic file for import. Graphics must be in one of the following formats:.mp.wmf.jpg.jpeg -more Micro-Graphic Panel Objects continued at top of next page. E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/

5 hapter : ccessories Micro-Graphic Programming Software (cont d) -more Micro-Graphic Panel Objects Object Graphic Object Graphic Recipe objects make it easy to make a large number of tag changes with the push of a single button. reate Recipes with up to entries, and multiple sets of values. Then just push a button to load an entire set of values into the group of recipe tags. The ynamic itmap object offers the ability to make an object using two different itmap graphics that will display one graphic when the Tag is On and a different graphic when the Tag is Off. Use your own bitmap designs or use some of the bitmaps provided with the software that are located in the User Graphic Library. The Static Text object is used to display a Frame with a personalized Message. This Frame and Message can be placed on any screen and any location within the screen. The Lookup Text object is used to display a Frame with a personalized Message. This Frame and Message can be placed on any screen and any location within the screen. The object is always displayed like a sign but is configured to display only the message prompted by an assigned Tag Name. Messages are retrieved from a Message atabase which is configured by the user with text defined by the user. The Lookup Text Object will scroll text up to characters. The ynamic Text object is used to display text that is retrieved from data stored in a Tag. The Tag Name is assigned to registers in the PL that contain set character data. The data can be stored in the PL in SII format and may include information such as machine numbers, locations, part numbers, and such. The Message can be configured to be visible (Trigger) when an associated Tag Name is On or Off. This object can be placed on any screen and any location within the screen. The ynamic Text Object will scroll text up to 0 characters. The Scroll Text object is available from the Text ategory of the Object List window. The Scroll Text object is an electronic version of a marquee. It is similar to the Static Text Object. If the text in the object does not fit in the window, it will scroll from right to left across the window. The Scroll Text object does not require a Tag Name assignment. The Scroll Text Object has a maximum character limit of characters. The Screen hange Pushbutton object is available from the ontrol ategory of the Object List window. The Screen hange Pushbutton object is a pushbutton that can be configured to activate another screen in the project. This object may be edited to various colors and sizes. Users can configure the button to activate the Power-Up screen, Forward Screen, Previous Screen, or any one of the project screens. The Screen Selector object is available from the ontrol ategory of the Object List window. This object is an enhanced version of the Screen hange pushbutton in that it offers many more features and defaults with data from screens in the project. This helps to save time by not having to create Screen change buttons for each screen. This object may be edited to various colors and sizes. The djust isplay ontrast object is used to allow the operator to adjust the Panel isplay ontrast. The default isplay setting often works in most applications, however lighting may vary based on the location of each application. In these cases the operator can use this object to make adjustments. The current display setting value will appear on the top of the button and will change as the arrow keys are pressed. This button can be modified to various sizes. The Function object is used to assign the panels function key buttons to a particular action as well as assigning the control of the LE On/Off status. When a button has been assigned as a shift button, the then F through F will become F through F. The Function Object buttons will activate when the hardware button is pressed or when the object is pressed on the screen. The object size is restricted so that the keys will line up with the hardware function keys on the panel. 0 E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/

6 hapter : ccessories US to RS- Programming able ssembly Using the -more Micro-Graphic Programming Software for project development, the -more Micro-Graphic panel can be connected to a P (personal computer) by using the US-to-RS- cable assembly, part number E-MG-PGM-L. onnect the US programming cable ( included) from a US port type on the P to the US type port on the converter (included). Next connect the serial programming cable from the converter s RJ port to the panel s RJ serial port. The panel receives power from the US port of the P that it is connected to through the US to RS- converter assembly. NOTE: Install -more Micro-Graphic Programming software before connecting the panel to the P to ensure the panel drivers install correctly. E-MG-PGM-L onverter Status LEs LE Status Indicators US onnectivity Tx Rx PWR US able User P onverter imensions P to Panel Programming able ssembly (Includes serial & US cables) E-MG-PGM-L US to RS onverter US to RS- onverter Pin ssignments Pin No. Signal escription 0V Power (-) onnection (GN) Pin ssignment Vout Output +V No. RX Receive data () TX Transmit data () No. Vin Input +V etect 0V Power (-) onnection (GN) -more inch Micro Graphic Panel Serial able US to RS- Programming able ssembly continued at top of next page. E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/

7 hapter : ccessories US to RS Programming able ssembly (cont d) US to RS onverter Specifications Part Number: E-MG-PGM-L -ft. cable assembly to connect personal computer to any -more Micro-Graphic panel for setup and programming. (Note: This cable assembly uses the P's US port and converts the signals to serial transmissions. The US port supplies V to the -more Micro-Graphic escription: panel for low-power mode configuration operations.) ssembly includes standard US - type connector to -type connector cable, custom converter, and an RS cable with RJ modular connector on each end. Hardware: US Specification Rev.. US Interface onnector: US Type jack to accept US Type cable plug RS (EI--E) Serial Interface onnector: RJ phone jack p to accept RJ cable plug aud Rate. kbps Maximum Input Voltage V (Supplied thru serial interface cable.) Power onsumption 0 m (oes not include power to panel and/or bezel.) ccessory ables: US Type plug to P on one end, US Type plug to converter on other end, US able 0.0 m [ foot] length (* Note) Serial able RJ phone plug connectors on both ends,.0 m [. feet] length (* Note) Environmental: Operating Temperature 0 to 0 ( to F) Storage Temperature -0 to 0 (- to F) Humidity to % RH (non-condensing) Environmental air No corrosive gases permitted IE00-- (Test Fc), - Hz:. mm amplitude, - Hz:.0G, sweeping, at a rate of Vibration octave/min. (±%), sweep cycles per axis on each of mutually perpendicular axes IE00-- (Test Ea), G peak, ms duration, three shocks in each direction Shock per axis, on mutually perpendicular axes (total of shocks) Physical:. (W) x. (H) x 0. () imensions [.0 mm x.0 mm x. mm] Weight.0 oz. [0 g] * Note: Maximum cable length for either the US or serial cable should not exceed.0 m [. feet] in length. E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/

8 hapter : ccessories 0-utton Landscape (Horizontal) Keypad ezel The 0-button keypad bezel is designed to be used with the -more Micro-Graphic panels. The keypad includes four directional arrow cursor buttons, a full numeric keypad, and one each of an ESPE, MENU, LER and ENTER button. The keypad is intended to be used with the numeric entry object to allow changing of a value, and can also be used to navigate & select screen objects. The numeric buttons can be used to enter a new value, or use the cursor left and right buttons to select a digit and the cursor up and down buttons to change the value, along with the ENTER and LER buttons. It can also be used to access and navigate the screen selector feature. The keypad bezel is designed for easy drop-in of a -more Micro-Graphic panel. No panel configuration is required. 0. [.] [.] E-MG-Z Panel utout 0. [.] R0. [R.] UTOUT imensions Units: Inches [mm]. [.]. [.] 0. [.] MOUNTING LIP () places EZEL OUTLINE UTOUT OUTLINE Units: Inches [mm].0. [.] [.] 0. [.0] 0-utton Keypad ezel continued at top of next page. +/ [.0]. [.] MOUNTING LIP (Qty:) SREW TORQUE RNGE - oz-in [ Nm] E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/ Esc Menu Enter LR Panel Thickness GSKET Esc Menu +/- 0 Four directional cursor buttons, numeric buttons and ES, MENU, LER and ENTER buttons. Enter LR ENLOSURE MOUNTING THIKNESS RNGE [ - mm]

9 E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/ hapter : ccessories 0-utton Landscape (Horizontal) Keypad ezel (cont d) Part Number: General: Micro-Graphic Panels Supported onnection Power onsumption Keypad utton Life 0-utton Keypad ezel Specifications E-MG-Z E-SML, E-SMLW onnects with expansion connector on the rear of the -more Micro-Graphic panel. None Minimum of 00,000 cycles () mounting clips, E-MG-Z-RK, included. Enclosure Mounting Note: The -more Micro-Graphic panel is installed into the keypad bezel using the () mounting clips, E-MG-Z-RK, that are supplied with the panel. Environmental: Operating Temperature 0 to 0 ( to F) Storage Temperature -0 to 0 (- to F) Humidity to % RH (non-condensing) Environmental air No corrosive gases permitted IE00-- (Test Fc), - Hz:. mm amplitude, - Hz:.0G, sweeping, at a rate of Vibration octave/min. (±%), sweep cycles per axis on each of mutually perpendicular axes IE00-- (Test Ea), G peak, ms duration, three shocks in each direction Shock per axis, on mutually perpendicular axes (total of shocks) NEM IS-0 Noise Immunity RFI, ( MHz, 0 Mhz cm) Impulse 00 µs pulse Enclosure NEM /X, IP- (When mounted correctly, for indoor use only.) E (EN-), UL0, UL anadian. No. -M, UL File E, gency pprovals S File Physical:.000 (W) x. (H) x. () imensions [.0 mm x. mm x. mm] Weight. oz. [0 g] -more Micro Graphic Panel being installed in a 0 button Keypad bezel E-MG-Z 0-utton Keypad ezel continued at top of next page.

10 hapter : ccessories 0-utton Horizontal (Landscape) Keypad ezel (cont d) Panel and 0-utton Keypad ezel ssembly. Use the () Panel Mounting lips, E-MG-Z-RK, that are supplied with the panel, to secure panel to keypad bezel and compress the gasket between the panel and the keypad bezel. Tighten screws to a torque of - oz-in [0.-0. Nm].. Remove Expansion onnector Protective over from rear of panel.. Use () ezel Mounting lips, E-MG-Z-RK, to secure keypad bezel through enclosure cutout. Tighten screws to a torque of - oz-in [0.-0. Nm]. Function Key Label Insert 0 utton Keypad ezel E-MG-Z -more Inch Micro-Graphic Panel. Peel Protective Film from front of panel. NOTE: Mounting clips for the panel and keypad bezels are included with the respective product. E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/

11 E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/ hapter : ccessories -utton Portrait (Vertical) Keypad ezel The -button keypad bezel is designed to be used with the -more Micro-Graphic panels. The keypad includes four directional arrow cursor buttons, a full numeric keypad, and one each of an ESPE, MENU, LER and two ENTER buttons. The keypad is intended to be used with the numeric entry object to allow changing of a value, and can also be used to navigate & select screen objects. The numeric buttons can be used to enter a new value, or use the cursor left and right buttons to select a digit and the cursor up and down buttons to change the value, along with the ENTER and LER buttons. It can also be used to access and navigate the screen selector feature. The keypad bezel is designed for easy drop-in of a -more Micro-Graphic panel. No panel configuration is required. 0. [.] [.] 0. [.] E-MG-ZP Panel utout EZEL OUTLINE R0. [R.] UTOUT OUTLINE UTOUT imensions 0. [.] Menu LR. [.]. [.] MOUNTING LIP (Qty: ) SREW TORQUE RNGE - oz-in [ Nm] Esc Enter +/- 0 Esc Menu LR +/- 0 -utton Keypad ezel continued at top of next page. Enter Enter Enter GSKET 0. [.0] Units: Inches [mm] MOUNTING LIP () places.0 [.] Panel Thickness. [.] Four directional cursor buttons, numeric buttons, and ES, MENU, LER and two ENTER buttons..000 [.0]. [.] ENLOSURE MOUNTING THIKNESS RNGE [ - mm]

12 hapter : ccessories -utton Vertical (Portrait) Keypad ezel (cont d) Part Number: General: Micro-Graphic Panels Supported onnection Power onsumption Keypad utton Life -utton Keypad ezel continued at top of next page. -utton Keypad ezel Specifications E-MG-ZP E-SML, E-SMLW onnects with expansion connector on the rear of the -more Micro-Graphic panel. None Minimum of 00,000 cycles () mounting clips, E-MG-Z-RK, included. Enclosure Mounting Note: The -more Micro-Graphic panel is installed into the keypad bezel using the () mounting clips, E-MG-Z-RK, that are supplied with the panel. Environmental: Operating Temperature 0 to 0 ( to F) Storage Temperature -0 to 0 (- to F) Humidity to % RH (non-condensing) Environmental air No corrosive gases permitted IE00-- (Test Fc), - Hz:. mm amplitude, - Hz:.0G, sweeping, at a rate of Vibration octave/min. (±%), sweep cycles per axis on each of mutually perpendicular axes IE00-- (Test Ea), G peak, ms duration, three shocks in each direction Shock per axis, on mutually perpendicular axes (total of shocks) NEM IS-0 Noise Immunity RFI, ( MHz, 0 Mhz cm) Impulse 00 µs pulse Enclosure NEM /X, IP- (When mounted correctly, for indoor use only.) E (EN-), UL0, UL anadian. No. -M, UL File E, gency pprovals S File Physical:. (W) x.000 (H) x. () imensions [. mm x.0 mm x. mm] Weight. oz. [0 g] -more Micro Graphic Panel installed in a button Keypad bezel E-MG-ZP E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/

13 hapter : ccessories -utton Vertical (Portrait) Keypad ezel (cont d) Panel and -utton Keypad ezel ssembly. Peel Protective Film from front of panel.. Use the () Panel Mounting lips, E-MG-Z-RK, that are supplied with the panel, to secure panel to keypad bezel and compress the gasket between the panel and the keypad bezel. Tighten screws to a torque of - oz-in [0.-0. Nm]. -more -Inch Micro-Graphic Panel. Use () ezel Mounting lips, E-MG-Z-RK, to secure keypad bezel through enclosure cutout. Tighten screws to a torque of - oz-in [0.-0. Nm]. - utton Keypad ezel E-MG-Z E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/. Remove Expansion onnector Protective over from rear of panel. Function Key Label Insert NOTE: Mounting clips for the panel and keypad bezels are included with the respective product.

14 KOYO ELETRONIS INUSTRIES O., LT. KOYO ELETRONIS INUSTRIES O., LT. R R hapter : ccessories -SU -pin 0-degree ommunication Port dapter The E-PTR- adapter plugs into the -pin serial port on the rear of the panel to allow a PL communication cable to be plugged in at a 0 degree angle to reduce panel depth requirements. -pin straight through pin-out. UL Recognized. E-PTR-.0 [0.]. [.] -SU -pin to Terminal lock dapter The E-OMON- adapter plugs into the -pin serial port on the rear of the panel to 0. [0.] Units: inches [mm] allow wire terminal connections for an RS-/RS-/H- PL communication cable. Units: inches [mm] UL Recognized.. [.]. [.]. [.] imensions. [.]. [.] ate code ountry of Origin E-PTR- IOIOI PL Units: inches [mm] GN ountry of Origin E-OMON- S 0. [.] Terminals 0. [.] ate code GN S S+ R R+ TERM S+ R R+ TERM Units: inches [mm] 0. [.] 0.0 [.] 0. [.] 0. [.] E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/

15 hapter : ccessories lear Screen Overlay Optional clear screen overlay used to protect -more Micro-Graphic displays from minor scratches and wear. Package contains three clear screen overlays. E--OV. [.] E--OV imensions. [.] lear Screen Overlay Installation Step Step Remove the overlay from the package Step lign the overlay with the screen and press the adhesive firmly into place *NOTE: The protective cover ships with a thin protective sheet on the face of the cover that needs to be carefully removed. If your panel is not clear, the protective sheet may not have been removed. 0. [.0] 0. [.0] Remove the paper backing from the overlay Step Remove the protective film* E-MG-USER-M Hardware User Manual, st Ed. Rev E, 0/