Chapter. Getting Started. In this Chapter...

Size: px

Start display at page:

Download "Chapter. Getting Started. In this Chapter..."

Jayson Strickland
5 years ago
Views:

1 Getting Started hapter In this hapter... Introduction...- The Purpose of this Manual...- Supplemental Manuals...- Technical Support...- onventions Used...- Key Topics for Each hapter...- gency pprovals...- Quick Start Steps...- Step Unpack and Inspect...- Step ecome Familiar with vailable ommunication Ports...- Step Install -more Micro Panel...- Enclosure learances...- Step Install the Programming Software and evelop a Project...- Step onnect -more Micro to omputer...- Step Provide Power to the -more Micro Panel...- Step ccessing the -more Micro Panel Setup Screens...- Step hoose -more Micro Panel to PL Protocol & ables...- Step onnect -more Micro Panel to PL...- UL R US

2 hapter - Getting Started 0 Introduction The Purpose of this Manual Thank you for purchasing from our -more Micro family of products. This manual describes utomationirect.com s -more Micro panels, specifications, included components and available accessories and provides you with important information for installation, connectivity and setup. The manual shows you how to install, wire and use the products. It also helps you understand how to interface the panels to other devices in a control system. This user manual contains important information for personnel who will install the panels and accessories, and for the personnel who will be programming the panel. If you understand control systems making use of operating interfaces such as the -more Micro panels, our user manuals will provide all the information you need to get, and keep, your system up and running. Supplemental Manuals If you are familiar with industrial control type devices, you may be able to get up and running with just the aide of the Quick Start Guide that is included with each panel. You may also refer to the online help that is available in the -more Micro programming software. Technical Support We strive to make our manuals the best in the industry. We rely on your feedback to let us know if we are reaching our goal. If you cannot find the solution to your particular application, or, if for any reason you need technical assistance, please call us at: 0 00 Our technical support group will work with you to answer your questions. They are available Monday through Friday from :00.M. to :00 P.M. Eastern Time. We also encourage you to visit our web site where you can find technical and non-technical information about our products and our company. - E-USER-M Hardware User Manual, nd Ed. Rev. F

hapter - Getting Started onventions Used When you see the notepad icon in the left-hand margin, the paragraph to its immediate right will be a special note.

3 hapter - Getting Started onventions Used When you see the notepad icon in the left-hand margin, the paragraph to its immediate right will be a special note. The word NOTE: in boldface will mark the beginning of the text. When you see the exclamation mark icon in the left-hand margin, the paragraph to its immediate right will be a warning. This information could prevent injury, loss of property, or even death (in extreme cases). The words Warning: or aution: in boldface will mark the beginning of the text. Key Topics for Each hapter The beginning of each chapter will list the key topics that can be found in that chapter. Getting Started TFT color display LE backlight In This hapter... Selectable Portrait or Landscape orientation General Information Specifications Requires - V lass power supply US Type programming port uilt in -pin serial communications port (RS-//) uilt in RJ port Five or Seven user-defined function keys, each with a user-programmable red LE Optional replaceable clear screen overlay HPTER uilt in larm ontrol setup that activates beep, backlight flash, customized alarm banner, and red LE blinking Up to screens, limited only by memory usage 0 to 0 ( to F) operating temperature range UL, cul & E agency approvals (see Panel Specifications and gency pprovals sections for details) -year warranty from date of purchase 0 E-USER-M Hardware User Manual, nd Ed. Rev. F -

4 hapter - Getting Started 0 gency pprovals ertifications Name UL / cul UL0 UL00 E ISO-000 E-SML-RN, E-SML-R, E-SML, E-TL N/ E E Yes Yes E-TL, E-TL, E-T0L E N/ - E-USER-M Hardware User Manual, nd Ed. Rev. F

hapter - Getting Started Quick Start Steps Step Unpack

) Unpack the -more Micro panel from its shipping carton.

Micro panel power connector mounting clips gasket Quick

Not included with E-SML-RN Mounting lips E-MG--ON ² Power

) Unpack any accessories that have been ordered, such as:

If anything is missing or damaged, immediately call the

5 hapter - Getting Started Quick Start Steps Step Unpack and Inspect a.) Unpack the -more Micro panel from its shipping carton. Included in the carton are the following: -more olor Micro panel power connector mounting clips gasket Quick Start Guide -more E series Panel Gasket ¹. Not included with E-SML-RN Mounting lips E-MG--ON ² Power onnector. Not included with E-SML-RN and E-SML-R b.) Unpack any accessories that have been ordered, such as: programming cable, PL communications cable, etc. c.) Inspect all equipment for completeness. If anything is missing or damaged, immediately call the utomationirect returns E-USER-M Hardware User Manual, nd Ed. Rev. F -

6 hapter - Getting Started 0 Step ecome Familiar with vailable ommunication Ports E-SML-RN and E-SML-R US Type Micro- Programming Port E-SML-RN and E-SML-R -more Micro panels include a built-in RJ RS- serial communications port designated as Port. The E-MG-PGM-L programming cable assembly connects to this port for programming the -more Micro with a P. In operation, the V-000L cable is used to connect to any utomationirect PL with an RJ port. These panels are powered through Port when using either of these cables. RJ serial communications Port Pin Signal Logic GN Power etect* RX () TX () +V in Logic GN RS- E-SML and E-TL E-SML, E-TL, E-TL, E-TL and E-T0L -more Micro panels include a built-in US Type port used to communicate with a P during project development. There is a -pin RS-/RS-/RS- port and an RJ RS- port for communications to a PL. PL -pin serial communications Port Ethernet Programming / ommunications Port Ethernet 0/00 ase-t Pin Signal T+ T R+ do not use Pin Signal do not use R N.. N.. RJ serial communications Port Pin Signal Frame GN TX () RX () do not use Logic GN Pin Signal Logic GN Power etect* RX () TX () +V in* Logic GN RS- Pin Signal Pin Signal LE TX+ (/) 0 TS () RTS () RX+ (/) RX (/) TX (/) Term. Resistor do not use do not use RS-// * E-TL not used - E-USER-M Hardware User Manual, nd Ed. Rev. F

7 hapter - Getting Started E-TL - + PL -pin serial communications Port PL -pin -sub serial communications Port RJ serial communications Port Expansion onnector E-TL and E-T0L US Type Programming Port Pin Signal Frame GN TX () RX () do not use Logic GN Expansion onnector RJ serial communications Port US Type Programming Port Pin Signal Frame GN TX () RX () do not use Logic GN Pin Signal Logic GN not used RX () TX () Supplies +V Logic GN RS- Pin Signal Pin Signal LE TX+ (/) 0 TS () RTS () RX+ (/) RX (/) TX (/) Term. Resistor do not use do not use RS-// Pin Signal Logic GN not used RX () TX () Supplies +V Logic GN RS- Pin Signal Pin Signal LE TX+ (/) 0 TS () RTS () RX+ (/) RX (/) TX (/) Term. Resistor do not use do not use RS-// NOTE: See hapter : Specifications and hapter : PL ommunications for additional details on the available communication ports, protocols and cables. NOTE: The panel has a built-in RJ serial communications port (Port - RS-) and a built in -pin serial communications port (Port - RS-//). Only one of the ports can be used with a connected PL. 0 E-USER-M Hardware User Manual, nd Ed. Rev. F -

8 hapter - Getting Started 0 Step Install -more Micro Panel The -more Micro panel can be mounted through a cutout in an enclosure by using the dimensions that follow. See hapter : Specifications for additional product dimensions. UTOUT OUTLINE EZEL OUTLINE UTOUT Landscape Mode (Horizontal) UTOUT OUTLINE EZEL OUTLINE UTOUT Portrait Mode (Vertical) utout imensions inches [mm] E-SML-RN E-SML-R E-SML E-TL E-TL E-TL E-T0L.0 [0.0].0 [0.0].0 [0.0].0 [0.0]. [.0]. [.0]. [0.]. [0.0]. [0.0]. [0.0]. [0.0]. [.].0 [.]. [.] 0. [.0] 0. [.0] 0. [.0] 0. [.] 0. [.] 0. [.] 0. [.] The enclosure mounting thickness range for the panels is [ mm]. Mounting lip Enclosure Thickness Range Mounting Screw Tightening Torque E-SML-RN E-SML-R E-SML - oz in ( N m) E-TL E-TL E-TL - oz in ( N m) E-T0L - E-USER-M Hardware User Manual, nd Ed. Rev. F

9 + - hapter - Getting Started Enclosure learances E-SML-RN, E-SML-R, E-SML, E-TL and E-TL In all installations,. [0.0 mm] minimum clearance is required inside an enclosure for proper ventilation of -more Micro panels.. [0 mm]. [0 mm]. [0 mm] Rear View Enclosure. [0 mm]. [0.0 mm] minimum clearance is required at the rear of a panel for proper ventilation of -more Micro panels.. [0.0 mm] Enclosure Side View 0 E-USER-M Hardware User Manual, nd Ed. Rev. F -

10 hapter - Getting Started 0 Enclosure learances (cont d) E-TL and E-T0L In all installations,.0 [0. mm] minimum clearance is required inside an enclosure for proper ventilation of -inch and 0-inch -more Micro panels..0 [0. mm].0 [0. mm].0 [0. mm] Rear View Enclosure.0 [0. mm]. [. mm] minimum clearance is required at the rear of a panel for proper ventilation of -inch and 0-inch -more Micro panels.. [. mm] Enclosure Side View -0 E-USER-M Hardware User Manual, nd Ed. Rev. F

11 hapter - Getting Started Step Install the Programming Software and evelop a Project -more Micro Programming Software is available for free download at Part Number E-SML-RN E-SML-R E-SML E-TL E-TL E-TL E-T0L Panel Software / Firmware Version Required.0 or later.0 or later.0 or later.0 or later. or later. or later. or later Following are the system requirements for running -more Micro Programming Software, E-MG-PGMSW, on a P: Operating System - Windows ( and bit), Windows ( and bit); Windows. ( and bit), Windows 0 Minimum 0 M free hard-disk space -ROM or V drive for installing software from the, or internet access to download free programming software US port or Ethernet port if using optional E-EOM for project transfer from software to touch panel Insert the -more Micro Programming Software -ROM into the P s -ROM drive or download the programming software from and follow the instructions. If you need assistance during the software installation, please refer to the supplied Software Installation Guide or call the utomationirect Technical Support team at NOTE: The US Type programming port has an internal US to serial converter. When the device is properly installed and the US programming cable connects the panel to the P, the port will be identified as a serial communications port with an assigned OM port number. 0 E-USER-M Hardware User Manual, nd Ed. Rev. F -

hapter - Getting Started 0 Step onnect -more Micro to

before connecting the panel to the P to ensure that the

E-SML-RN and E-SML-R Use an E-MG-PGM-L, US to RS-

project development P, through the supplied converter,

on the -more Micro-Graphic panel as shown below.

able ssembly (Includes serial & US cables) p/n

12 hapter - Getting Started 0 Step onnect -more Micro to omputer NOTE: Install -more Micro Programming software before connecting the panel to the P to ensure that the panel drivers install correctly. E-SML-RN and E-SML-R Use an E-MG-PGM-L, US to RS- Programming able ssembly, from an US port type on the project development P, through the supplied converter, to the RJ RS- programming/pl serial communications port on the -more Micro-Graphic panel as shown below. User P US able US to RS onverter P to Panel Programming able ssembly (Includes serial & US cables) p/n E-MG-PGM-L E-SML-R(N) -more Micro Panel Serial able - E-USER-M Hardware User Manual, nd Ed. Rev. F

hapter - Getting Started E-SML and E-TL Ethernet: onnect the P RJ Ethernet port to the -more Micro panels built-in RJ

US Type port: onnect the P US Type port to the panels US type micro port using a standard US to micro US cable.

E-TL, E-TL and E-T0L Ethernet (Optional): Purchase the E-EOM Ethernet Option Module from utomationirect to connect the

US Type port: onnect the P US Type port to the panels US Type port using standard US Type to Type cables.

13 hapter - Getting Started E-SML and E-TL Ethernet: onnect the P RJ Ethernet port to the -more Micro panels built-in RJ Ethernet port. US Type port: onnect the P US Type port to the panels US type micro port using a standard US to micro US cable. Maximum micro US cable length should not exceed six feet. See part number US-L-MI on the utomationirect web store. E-TL, E-TL and E-T0L Ethernet (Optional): Purchase the E-EOM Ethernet Option Module from utomationirect to connect the P to the -more Micro Panels. US Type port: onnect the P US Type port to the panels US Type port using standard US Type to Type cables. See part number US-L- on the utomationirect web store. User P US-L- NOTE: E-SML and E-TL are programmable via the built-in Ethernet port. -more Micro Panel NOTE: dding the optional E-EOM module to the E, and 0-inch models allows programming via an Ethernet connection with ate cable. 0 E-USER-M Hardware User Manual, nd Ed. Rev. F -

14 hapter - Getting Started 0 Step Provide Power to the -more Micro Panel E-SML-RN and E-SML-R E-SML-RN and E-SML-R -more Micro panels are powered during programming from the P through the US to RS- Programming able ssembly, E-MG-PGM-L. uring operation, E-SML-RN and E-SML-R -more Micro panels can be powered from most utomationirect PL s RJ serial communications port by using a V-000L communications cable, or a V-000L communications cable with a F-H -pin H Sub/RJ dapter connected to a irectlogi PL s -pin H communications port (L0, -0- & -0) PLs. See hapter : PL ommunications for additional details. To PL RJ Port = Sig GN = + V = RX = TX = not used = Sig GN Power Supplied to Panel through able from utomationirect PL s, RS- (p/n V-000L) RJ -pin Phone Plug (P) GN TX RX + V GN 0 feet [.0 m] Maximum Wiring iagram GN RX TX + V GN RJ -pin Phone Plug (P) To -more Micro-Graphic Serial Port = Sig GN = not used = RX = TX = + V = Sig GN - E-USER-M Hardware User Manual, nd Ed. Rev. F

15 hapter - Getting Started E-SML, E-TL, E-TL, E-TL and E-T0L E-SML, E-TL, E-TL, E-TL and E-T0L panels are powered by a - V class power source. Supply to Panel: V Equipment Ground +. Required Wire Specification Supported temperature Over 0 Wire Material opper Wire Size - WG Tightening Torque Power supply wire connection Recommended Power Supply Part Number Power Power Supply E-SML-RN E-SML-R N/ N/ E-SML W E-TL W E-TL. W PSL--00 E-TL W E-T0L 0W PS--0. lb-in (0. Nm) 0 E-USER-M Hardware User Manual, nd Ed. Rev. F -

hapter - Getting Started 0 Step ccessing the -more Micro Panel Setup Screens To access the Setup Menu of the panel s setup screens on models with function keys, press the the K [F] and ENT

16 hapter - Getting Started 0 Step ccessing the -more Micro Panel Setup Screens To access the Setup Menu of the panel s setup screens on models with function keys, press the the K [F] and ENT [F]function keys simultaneously for three () seconds. For E- TL, touch the upper left corner of the screen for three seconds. From the Setup Menu, information about the panel can be obtained, settings can be adjusted, and panel functions can be tested. NOTE: See hapter : System Setup Screens for details on using the setup screen settings and functions. SETUP MENU. Information >. Setting >. Test Menu >. Exit > ENT K UP WN ENT MEMORY Total: 00 ytes Usage: 0 ytes Free: 00 ytes K Setup Menu [pg. -]. Information [pg. -]. Setting [pg. -]. Test Menu [pg. -]. Exit [pg. -]. Memory [pg. -]. Protocol [pg. -]. Extensions [pg. -]. Versions [pg. -]. rightness [pg. -]. Touch / Key eep [pg. -] alibration [pg. -]. lear User Memory [pg. -0]. Reset to Factory efault [pg. -0]. Hourglass [pg. -]. Rotation [pg. -]. Ethernet [pg. -]. Serial Port Loop ack Test [pg. -]. Serial Port Loop ack Test [pg. -]. PL Enquiry Test [pg. -]. uzzer Test [pg. -]. Touch Panel Test [pg. -]. isplay Test No[F] [pg. -] / Yes[F] o you want to exit from System Screen? No[F] / Yes[F] - E-USER-M Hardware User Manual, nd Ed. Rev. F

17 hapter - Getting Started Step hoose -more Micro Panel to PL Protocol & ables vailable PL Protocols PL rivers Serial - port or port Serial - port only Ethernet* utomationirect Productivity Series llen-radley F Half uplex llen-radley F Full uplex utomationirect Productivity Series Ethernet utomationirect o-more / RX** llen-radley PL F utomationirect o-more / RX Ethernet utomationirect LIK llen-radley H utomationirect LIK Ethernet utomationirect K-sequence GE SNPX (0/0, 0/0, Micro 0, VersaMax Micro) utomationirect EOM Ethernet utomationirect irectnet Mitsubishi FX Modbus TP/IP utomationirect Modbus Mitsubishi Q & Qn llen-radley EtherNet / IP lient Modicon Modbus RTU Omron Host Link (00 dapter, 00) (MicroLogix 00/00) Entivity Modbus RTU Omron FINS Serial (J, S) llen-radley EtherNet / IP lient Siemens PPI (S-00 PU) utomationirect SOLO Temperature ontroller utomationirect GS rives (SL / 0 / ENI dapter) * Ethernet port is built in on E-SML and E-TL. dd an Ethernet port to E-TL, E-TL and E-T0L with an optional E-EOM module. ** X-P-SER-RJ is required vailable Purchased ables able escription able Part No. ables used with RJ RS- serial Port utomationirect Productivity Series, o-more / RX*, LIK, irect LOGI PL RJ- port, L0, L0, L0, L0, -0, -0, - & H-WinPL (RS-). 0-L.m (ft) cable length irect LOGI (VG Style) -pin port, L0, -0 (0-), -0 (RS-). Use with 0-L cable. F-H irect LOGI PL -pin -sub port, L0 (RS-). Use with 0-L cable. F-KIT irect LOGI PL RJ- port, -0 (RS-) m (. ft) cable length OP-L- * X-P-SER-RJ is required vailable Purchased ables continued on the next page 0 E-USER-M Hardware User Manual, nd Ed. Rev. F -

18 hapter - Getting Started 0 vailable Purchased ables (cont d) able escription able Part No. ables used with -pin RS-// serial Port utomationirect Productivity Series, o-more / RX*, LIK, irect LOGI PL RJ- port, L0, L0, L0, L0, -0, -0, - & H-WinPL E-L (RS-) m (. ft) cable length irect LOGI (VG Style) -pin port, L0, -0 (0- ), -0 (RS-) m (. ft) cable length E-L- irect LOGI PL RJ- port, -0 (RS-) m (. ft) cable length E-L irect LOGI L0 PL -pin -sub port, L0 (RS-) m (. ft) cable length E-L- irect LOGI PL -pin -sub port, L0, -0, L0 U and all M s (RS-) E-L- m (. ft) cable length llen-radley MicroLogix 000, 00, 00, 00 & 00 (RS-) m (. ft) cable length E-MLOGIX-L llen-radley SL -0/0/0, ontrollogix, ompactlogix, FlexLogix F port (RS-) m (. ft) cable length E-SL--L llen-radley PL- F port (RS-) m (. ft) cable length E-PL--L llen-radley MicroLogix, SL -0/0/0 H port (RS-) m (. ft) cable length E-H-L GE 0/0, 0/0, Micro 0, Versamax Micro (Port) -pin -sub port (RS-) m (. ft) cable length E-0-0-L MITSUISHI FX Series -pin port (RS-) m (. ft) cable length E-MITSU-L MITSUISHI FX Series -pin mini-in (RS-) m (. ft) cable length E-MITSU-L- OMRON Host Link (00 dapter, 00) (RS-) m (. ft) cable length E-OMRON-L * X-P-SER-RJ is required NOTE: See hapter : PL ommunications for a detailed chart of PL compatibility & cable connections. hapter includes wiring diagrams for end user construction of certain cables. - E-USER-M Hardware User Manual, nd Ed. Rev. F

-V 0. +V hapter - Getting Started Step onnect -more Micro Panel

serial communications port (RS-) or depending on model, the -pin

allows communications via an Ethernet connection.

Example of panel s Port connected to a LIK PL LIK PL Port

19 OUTPUT V 0. V 0V G L N INPUT 00-0V V 0-0Hz 0-00 PWR 0-T V 0 V -V 0. PWR 0-0T.-V 0. +V hapter - Getting Started Step onnect -more Micro Panel to PL onnect the serial communications cable between the -more Micro panel and the PL. The panel can be connected to the PL via the panel s built-in RJ serial communications port (RS-) or depending on model, the -pin serial communications port with either RS-, RS- or RS- communications. dding the optional E-EOM module to the E, and 0-inch models allows communications via an Ethernet connection. n Ethernet port is built-in to the E-SML and E-TL. Example of panel s Port connected to a LIK PL LIK PL Port Example of E-TL Ethernet Port connected to a LIK PL with Ethernet PS--00 Power Supply Port V-000L serial cable -more E-TL Micro Panel E-SML-R(N) -more Micro Panel Ethernet able LIK Ethernet PL Port OUTPUT OUTPUT 0 E-USER-M Hardware User Manual, nd Ed. Rev. F -

-more Micro Panel Port Example of panel s Port

Series Micro Panel with E-EOM module Ethernet able

OUTPUT OUTPUT Example of panel s Port connected to

L-0 PL Port -more to irect LOGI VG -pin port serial

20 OUTPUT V 0. V 0V G L N INPUT 00-0V V 0-0Hz 0-00 PWR 0-T -V 0. V 0 V PWR 0-0T.-V 0. +V hapter - Getting Started 0 PS--00 Power Supply -more Micro Panel Port Example of panel s Port connected to a L0 PL PS--00 Power Supply -more E Series Micro Panel with E-EOM module Ethernet able LIK PL Port Port E-L serial cable LIK Ethernet PL OUTPUT OUTPUT Example of panel s Port connected to a LIK PL -more Micro Panel Port PS--00 Power Supply L-0 PL Port -more to irect LOGI VG -pin port serial cable p/n E-L- Example of optional E-EOM module connected to a LIK PL with Ethernet. -0 E-USER-M Hardware User Manual, nd Ed. Rev. F

Chapter. Getting Started. In this Chapter...

Chapter. Getting Started. In this Chapter... Getting Started hapter In this hapter... Introduction... - onventions Used... - Mounting lips New Style... - Product Overview... - Part Number Key Touch Panels... - EZTouch onversion and Mounting... -