Transcription

1 1 1. Introduction 1.1. About this Manual This manual is intended to provide the user with an overview of the board and benefits, complete features specifications, and set up procedures. It contains important safety information as well Feedback and Update to this Manual To help our customers make the most of our products, we are continually making additional and updated resources available on the JK Electronics technical support website (). These include manuals, application notes, programming examples, and updated software and hardware. Check in periodically to see what s new! When we are prioritizing work on these updated resources, feedback from customers is the number one influence, If you have questions, comments, or concerns about your product or project, please no hesitate to contact us at mailto:master@deviceshop.net Limited Warranty JK Electronics warrants this product to be free of defects in material and workmanship for a period of six month from date of buy. During this warranty period JK Electronics will repair or replace the defective unit in accordance with the following process: This limited warranty does not cover damages resulting from lighting or other power surges, misuse, abuse, abnormal conditions of operation, or attempts to alter or modify the function of the product. This warranty is limited to the repair or replacement of the defective unit.in no event shall JK Electronics be liable or responsible for any loss or damages, including but not limited to any lost profits, incidental or consequential damages, loss of business, or anticipatory profits arising from the use or inability to use this products. Repairs make after the expiration of the warranty period are subject to a repair charge and the cost of return shipping. Please contact JK Electronics to arrange for any repair service and to obtain repair charge information. 4. License of this manual 이매뉴얼의 JK전자에의해서번역, 수정, 작성되었고소유권또한 JK전자의것입니다. 소유권자의허가를받지않고무단으로수정, 삭제하거나배포할수없습니다 Copyright by JK Electronics.

2 2 1. Describes WinCE6.0 Features WinCE6.0 and 5.0 the difference between WinCE6.0 R3 platform to introduce and install the necessary software to download Establish platform for the build environment VS2005 development environment installed Install Visual Studio 2005 Service Pack Installation Platform builder plug-in to VS2005SP Installation PlatformBuilder 6.0 SP Installation PlatformBuild6.0 R2 Upgrade Package Install patch in Clear patch install Installation Platform Builder 6.0 R3 upgrade package Blend component installation Word PDF View component installation Tencent QQ component installation(optional) Customize WINCE kernel The BSP package use of SMDK Establishment of project Generate image file type selection Project Properties setting Select the basis library use for development Communication Component Selection operating system, core services component selection File System Component Selection English font selection Media component selection Font support Korean Select Internet Service Shell and User Interface options Common-driven selection Third Party Component Selection Compiler generated method of image file WinCE image file generation process compiling instructions and application methods...61

3 3 4.3 Compiler works Does not load or load a driver compilation method Load third-party executable file to the NK method SD Card boot disk to compile the required documents Curing and update WinCE image Description of several files Create a boot disk for SD Card From the SD card into the NAND FLASH boot-curing process From the NAND FLASH boot using the USB download NK use the network to download to update the NK Configuration used in LCD development board WinCE application software and Module Test GPS Module Test WinCE Memory Distribution and Export SDK virtual memory mapping table WINCE Memory Distribution Export SDK, remote connection Export SDK VS2005 Remote to connect to the development board...98

4 4 1. Describes WinCE6.0 Features 1.1 WinCE6.0 and 5.0 the difference between Redesign of the Kernel, to support the process of expanding the number of from 32 to 32,000 each process's address space from 32MB to 2GB expansion of a lot of system modules (such as file systems and device manager) will run in kernel mode, OAL independent from kernel, driver can be run in kernel mode and user mode of Visual Studio 2005 Professional Edition will include a feature known as the Platform Builder plug-powerful, it is an embedded platform designed for the "integrated development environment." The integrated development environment makes the entire development chain together, and provides a device to applications from the easy to use tools, greatly accelerated the market for device development. Windows Embedded CE 6.0 adds new cell core data and voice components. Windows CE 6.0 dramatically change the core mechanism for addressing and resource allocation, old CE at the same time can only have 32 programs running in their virtual memory space allocation of 32MB in Version 6.0 is a substantial relaxation of restrictions on the maximum simultaneous implementation of the 32,000 program, and each program can have an independent distribution 2GB virtual memory, in the meantime, core services, hardware device drivers, Windows graphics and event subsystems, file systems and other services have been transferred to the core of the system reserved space. However, such a change would bring the user concerns, after all, has been staged over the past NT 4.0 on a similar play yards, will drive the transfer process from user mode to kernel-mode, although the speed of applications can be greatly improved, but a bad physical drive program, perhaps I would drag down the entire system, so the development of the hardware drivers, and it will need to have an effective criteria to standardize the best but also like to import such as the WHQL driver certification services in order to avoid affecting the entire system stability. The new changes in Windows CE 6.0 Windows CE 6.0 are still bets to look at the ARM architecture, the new BSP and the compiler also supports the latest ARM system, while the 6.0 version is the first Microsoft operating system ExFAT import, ExFAT in Windows CE 6.0, the play of the mains All external storage media's role in the boundary layer is widely praised by the industry is that it can be lifted in the past the traditional FAT file system capacity limit of 32GB one. ExFAT also removed 2GB single file only the following constraints, which for the Windows CE hardware manufacturers to develop high-capacity storage management servo structure, with considerable help. Plus some security mechanisms, we can ExFAT as NTFS on Windows CE 6.0 enhanced version. VoIP is

5 5 also a Windows CE 6.0 continues to enhance the focus of another, in addition to further the integration of the application layer outside the core operating system also has the ability to direct support, so hardware developers can more easily in the Windows CE environment on a variety of network voice communication services. The response to this trend, version 6.0, naturally the absence of the past 5.0 to make corrections over, in the network stack agreements, directly supports i, WAP2, e (Wireless QoS), Bluetooth A2DP/AVRCP of the AES encryption, etc., for wireless communication to establish a stable, secure and reliable application environment. From the user point of view, Windows CE 6.0 extends the commitment to go beyond the sum of the previous version, these features include the latest multimedia capabilities, such as Windows Media 10/11 support, for Networked multimedia devices, native integration capabilities, in the Platform Builder development tool, and even joined the action to the Media Center support, can take advantage of Windows Media Connect 2.0 has significantly strengthened its ability to support multimedia applications, and can be with other Microsoft operating system or hardware device synchronization, integration action. These features include the following items : TIFF codec support HD-DVD decoder supports MPEG-2 decoder More video encoding and format support UDF 2.5 format, support for virtual surround support Enhanced multi-track audio support for DirectDraw, Can support interlaced TV display mode used by USB OTG function to join, can be used as the control of USB terminal. Although the core to make such a big update, but the storage on the Windows CE 6.0, and not, as other operating systems like Microsoft's soaring (Vista or even need more than 10GB to install the initial storage space!), Compared with from 5.0, 6.0 in size, but also an increase of about 5%, although this right is granted the embedded systems industry, but Microsoft can be said is another miracle.

6 6 Windows CE 6.0 gives developers the benefits of In the history of open source, Microsoft wants to write another new milestone in 100% of the product developers to release source code, and can be customized to allow manufacturers to alter or tailor-made, without releasing the modified procedure yards, although in a broad sense, and can not be considered truly open, but for those vendors who prefer Cangsi hold back no doubt to increase the competitiveness of one of the best. As a development tool Visual Studio 2005 PRO will serve as the overall suite of Windows CE 6.0, one of the many built-in development tools and the definition is relatively convenient for developers of many. Windows CE 6.0 supports Windows. NET Compact Framework 2.0 as an application program management development as well as Win32, MFC, ATL, WTL and STL and other application development interface for developers of native applications developers to use. With such a huge influence, as well as a complete development environment to support, developers and manufacturers to ensure that the follow-up support can also be hard-pressed. In the hardware side, the hardware without changing the original structure, the import Windows CE 6.0 can significantly improve the efficiency of the original program execution, and also allow for more programs at the same time run concurrently, as each program has a separate the implementation of space-specific when a program crashes, it will not affect the implementation of other applications or systems available to users more than ever the stability of legacy systems and greater flexibility. The increasingly popular in the current multi-core processing architecture, Windows CE 6.0 can also not change the program developers, under the status of the original program model to provide the best of the core work of automatic allocation and designation, of course, if there is demand, then Developers can still program on their own decided to designate the core approach. Windows Embedded 6.0 R3 is a Windows CE 6.0 R2, based on the increase in the following technologies: (1) Silverlight for Embedded (2) Internet Explorer Embedded browser (3) Flash Lite support (4) gesture recognition Gesture API (5) Connection Manager (6) Mobile QQ (7) Office Viewer

7 7 Added Silverlight for Windows Embedded, this feature is Microsoft Silverlight technology does not rely on the browser's native code execution, used for Windows Embedded CE 6.0 R3-based devices to create a rich immersive user interface. For example, in Expression Blend, you can more easily conduct of view of development, through XRCustom UserControlImpl class you can simply create a custom control used to control high-definition view of the size, color and dynamic images, and many other common operations. Original equipment manufacturers are now able to separate the device user experience design and core function of the development, application development by shortening the time to help improve the efficiency of market processes in order to achieve a simplified user interface customization, and allow designers and developers can focus on their core competencies. Can now be developed by a dedicated staff to use Silverlight, Microsoft Expression Blend, and Internet Explorer Embedded technology development HD content. As Windows 7 generation of products, he provided with the Windows 7 connectivity - Windows 7 Device Stage-driven port. And developers and OEM vendors through Microsoft Connection Manager (Microsoft Link Manager) to achieve the connection between device and PC. At the same time the new office and PDF viewer are also enrich the experience of interconnection. Flash Lite component support, making WinCE With FLASH animation and video playback capabilities, enhanced user experience.\ 1.3 WinCE6.0 R3 platform to introduce and install the necessary software to download (1) VS2005TEAMSUITE VS2005 Development Environment (2) VS80sp1-KB X86.exe VS2005 SP1 package (3) Windows Embedded CE 6.0.msi PB6.0 Build Environment (4) Windows Embedded CE 6.0 Platform Builder Service Pack 1.msi 6.0SP1 patch A8E3-290ADF242678&displaylang=en (5) Windows Embedded CE 6.0 R2.msi R2 patch

8 8 (6) WinCEPB Product-Update-Rollup-Armv4I.msi 08 mid-patches ARMV4I) (7) WinCEPB M01-Armv4I.msi 0901 patch b91d-7eef5730b892&displaylang=en (8) WinCEPB M02-Armv4I.msi 0902 patch (9) WinCEPB M03-Armv4I.msi 0903 patch (10) WinCEPB M04-Armv4I.msi 0904 patch 48A3-BF0A-CAC98AE07A99&displaylang=en (11) WinCEPB M05-Armv4I.msi 0905 patch 4E2B-B0DF-39786B6D4838&displaylang=en&displaylang=en (12) WinCEPB M06-Armv4I.msi 0906 patch (13) WinCEPB M07-Armv4I.msi 0907 patch 44F6-94E EC23&displaylang=en (14) WinCEPB M08-Armv4I.msi 0908 patch E629E03F1BAA&displaylang=en (15) Windows Embedded CE 6.0 R3.msi R3 patch 247d88-ddb6-4d4a-a595-8eee3556fe46 (16) Blend_Trial_en.exe Blend components (optional)

9 9 (17) WesttekFileViewers6.exe office components (optional) 428b-951c-343f910047c1&displaylang=en (18) QQ2008.msi Tecent QQ (optional) a6ad ec&displaylang=en 2. Establish platform for the build environment 2.1 VS2005 development environment installed The software need to be installed include: (1) Visual Studio 2005 (2) Visual Studio 2005 Service Pack 1 (3) MSDN (Optional) (4) Windows Embedded CE 6.0 (5) Windows Embedded CE 6.0 Platform Builder Service Pack 1 (6) WINCE6.0R2 (7) Microsoft Device Emulator 2.0 (Optional) (8) Virtual Machine Network Driver for Microsoft Device Emulator (optional) (9) WINCE6.0 updates (10) WINCE6.0R3 Notice: The item (3), (7), (8) do not have to be installed, the user install them based on the condition. This book based on Windows XP SP2 and Windows XP SP3.

10 10

11 11

12 12

13 13

14 Install Visual Studio 2005 Service Pack 1 The installation file located under VS2005\VSTS\sp1 directory, double click VS80sp1- KB X86-ENU.exe This file must be installed. The Release Note has mentioned SP1 provide Windows embedded 6.0 platform and tools support. The install file is VS80sp1- KB X86-ENU.exe. This file is available for various version of VS2005 (Standard/ Professional/Tem Edition). If user use Vista system, after install this patch, user still need to install VS80sp1-KB X86-ENU.exe patch.

15 15

16 Installation Platform builder plug-in to VS2005SP1 (1) Double-click the Windows Embedded CE 6.0.msi (2) Enter the number SN

17 17 (3) Accept the license agreement (4) The default choice ARMVI

18 18 (5) Click NEXT, Install (6) Being installed

19 19 (7) Complete the installation. 2.4 Installation PlatformBuilder 6.0 SP1 SP1 installed, double-click the Windows Embedded CE 6.0 Platform Builder Service Pack 1.msi.

20 20 Click NEXT Click NEXT Click Install

21 Installation PlatformBuild6.0 R2 Upgrade Package Double-click the Windows Embedded CE 6.0 R2.msi

22 22

23 23

24 Install patch in 2008 Double-click WinCEPB Product-Update-Rollup-Armv4I.msi

25 25

26 26

27 Clear patch install. The following patches were installed, double-click the installation can be WinCEPB M01-Armv4I.msi 0901 patch WinCEPB M02-Armv4I.msi 0902 patch WinCEPB M08-Armv4I.msi 0903 patch WinCEPB M04-Armv4I.msi 0904 patch WinCEPB M05-Armv4I.msi 0905 patch WinCEPB M06-Armv4I.msi 0906 patch WinCEPB M07-Armv4I.msi 0907 patch WinCEPB M08-Armv4I.msi 0908 patch 2.8 Installation Platform Builder 6.0 R3 upgrade package Double-click CE6R3 directory of Windows Embedded CE 6.0 R3.msi

28 28

29 29

30 Blend component installation Click Blend_Trial_en.exe

31 31

32 32

33 Word PDF View component installation Click WesttekFileViewers6.exe Click Next

34 34 Click Next Click Next

35 35 Finish 2.11 Tencent QQ component installation(optional) Click QQ2008.msi

36 36 Click Next Click Next

37 37

38 38 3. Customize WINCE kernel. 3.1 The BSP package use of SMDK6410 BSP is a board support package, is between the motherboard layer between the hardware and operating systems, it should be said to belong to a part of the operating system, the main purpose is to support the operating system, so that it can better run on the hardware board. BSP is relative to the operating system is concerned, different operating systems correspond to different definitions of forms of BSP, the BSP such as VxWorks and Linux, BSP in relation to a particular CPU is the same despite the realization of the function, but the writing and interface definitions are completely different, so write BSP must be in accordance with the definition of the form of the system BSP to write (BSP programming process of forming a majority of the BSP in a template to modify), so as to maintain the correct OS, and the upper interface, good support the upper OS. REAL6410 development board WinCE BSP is based on Samsung's official release SMDK6410 development board BSP changes from the majority to retain the structure of Samsung joined the REALARM hardware design features of a BSP, the BSP supports WinCE6.0 R3. (1) WinCE BSP are usually placed in the C:\WINCE600\PLATFORM next, which requires us to platform\smdk6410.rar files copied to this directory after decompression, the attention generated after decompression SMDK6410 directory is the root directory, the following map show.

39 39 In addition, we must ensure that SMDK6410 directory read-write property, the proposed view SMDK6410 property, if it is read-only, to remove the read-only attribute. (2) Extract Platom\ directory under the S3C6410_SEC_V1.rar generated S3C6410_SEC_V1 Copy S3C6410_SEC_V1 directory to C:\WINCE600\ PLATFORM\COMMON\SRC\SOC and modify the C:\WINCE600\PLATFORM\COMMON\SRC\SOC content of the file under the dir DIRS= \ S3C6410_SEC_V1 \ The modification is intended to only compile S3C6410_SEC_V1, rather than to compile other documentation, reducing compile time. 3.2 Establishment of project (1) Start VS2005 (2) Click the menu File\New\Project In the Name field, enter a project name REAL6410V1, users can customize the project name.

40 40 (3) Click OK. (4) Click Next

41 41 (4) The next step, select SMDK6410: ARMV4I (5) The next step, select the device type of PDA Device

42 42 (5) The next step, select the device type of Mobile Handheld (7) The next step, choose ActiveSync is used to connect with the PC Sync Internet Explore 6.0 IE6 browser Microsoft's Windows Media Play music player Word Pad Microsoft Word

43 43 Click Next Click Next

44 44 Click Finish Click Acknowledge

45 Generate image file type selection Platform Builder can generate two kinds of image files : (1) For release to users, known as Realse version of the file stored in the post-build : C:\WINCE600\OSDesigns\REAL6410V1\REAL6410V1\RelDir\SMDK6410_ARMV4I_Release Which REAL6410V1 is the project name we created. (2) For debugging, called Debug version of the file stored in the post-build : C:\WINCE600\OSDesigns\REAL6410V1\REAL6410V1\RelDir\SMDK6410_ARMV4I_Debug Here we can do the following actions to select the type of image file Here, we choose to Release version 3.4 Project Properties setting

46 46 (1) In the 3.3 set up, we look at the mirror to see the General Options Cary path and type, as well as the name of the generated image NK.bin, here we use the default choice, do not need to change. (2) Through the Locale tab, we have to select the language Click Clear All, Select English

47 47 Add Korean locale. Build Options : Clear Enable KITL 3.5 Select the end-user application Options for end-user application (Application-End User), as shown below Click the left side of the bottom of the window tab, options Catalog Items View

48 48 (1) ActiveSync : For the development board and PC-sync, it is recommended to choose from, otherwise it is impossible, and PC sync via USB (2) CAB Installer / Uninstaller : CAB file to install and uninstall programs (3) Games : WinCE comes with a small game, such as the need to choose (4) Help : WinCE for help files (5) Remote Desktop Connection: VS2005 and development board remote connection protocol RDP choice selection through ActiveSync to connect PC, to view the registry, WINCE desktop and other information (6) Terminal Emulator : terminal emulation program (7) Windows Messenger : MSN chat software (8) WordPad : Word version of the Wince under 3.6 Select the basis library use for development Choose a program or service program development and application of the foundation class library (Application & Services Development) as shown in. According to their own development needs can choose the appropriate library.

49 49

50 Communication Component Selection

51 51

52 operating system, core services component selection At this point, we choose to (1) Battery Driver battery-powered (2) Serial Port Support serial port support (3) USB Host Support USB Host Support (4) USB Human Ipnut Device (HID) USB HID Mouse Only Chosen to support USB MOUSE (5) USB Storage Class Driver USB mass storage support, U disk support

53 File System Component Selection The file system selected: (1) Based on RAM and ROM file system (2) Based on its HIVE registry in the ROM, power-down without loss of (3) Supported BINFS, CD / UDFS File System, ExFAT, FAT file system

54 English font selection 3.11 Media component selection

55 55

56 Font support Korean

57 Select Internet Service

58 Shell and User Interface options

59 Common-driven selection 3.16 Third Party Component Selection Select OFFICE Viewer components and mobile QQ

60 60 4. Compiler generated method of image file 4.1 WinCE image file generation process Wince compilation is divided into four steps, sysgen, build, release copy, make image sysgen : System generation based on user settings, resulting in a corresponding header files, library files. For example, in \PUBLIC\COMMON\OAK\LIB\ARMV4I\DEBUG\ Here are library files wavemdd.lib, create testbuild (based on the BSP device emulator) works, sysgen after \testbuild\testbuild\wince600 \DeviceEmulator_ARMV4I \cesysgen\oak\lib\armv4i\debug The following have wavemdd.lib, The same time, \testbuild\testbuild\wince600\deviceemulator_armv4i\cesysgen below, there are many header files and library files. User VS2005 changes, such as the choice of ActiveSync (SYSGEN_AS_BASE), which will be added in the PBInitEnv.bat 1: set SYSGEN_AS_BASE = 1 Select Project ->testbuild property -> Locale or Build Options, so changes are also reflected in the PBInitEnv.bat years. Sysgen will be according to many. bat files (will deal with dependencies), such as winceos.bat. If the user modified the settings, or add a component, you need to do sysgen. Build : Compile wince os, BSP, bootloader, the application. Use SOURCES, DIRS, and Build.exe to organize compile, rather than Visual Studio, dws, sln file to organize the code. Build.exe Find DIRS, If not, find SOURCES file, (DIRS, sources do not coexist in the same directory), if there are sources, then the call nmake.exe Makefile. Makefile is usually written like this:! INCLUDE $ (_MAKEENVROOT) \ makefile.def That is: PUBLIC\COMMON\OAK\ MISC\makefile.def, this file will contain! INCLUDE. \ Sources Such sources are listed inside the file will be compiled, libraries are link. There is also a makefile.inc Release copy : Copy to the _FLATRELEASEDIR directory.

61 61 Make Image : Merge the configuration file : bib, dat, reg, db. Then pack, generate nk.bin Finally the end of a record is that, Start = 0x , Length = 0x8C072C3C is StartUp address, Chksum = 0x bin file in the head (not including records) can be expressed with the following structure struct BinFile { BYTE signature [7]; / / = { "B" ', "0",''0'',''0'', ''F'',''F'',''\ a''} DWORD ImageStart DWORD ImageLength }; 4.2 compiling instructions and application methods (1) The new project to compile, for example, the new works entitled Real6410V1, use the menu Build\ Real6410V1

62 62 (2) Alteration of the *. bib, *. reg and other configuration files Executive Menu Builder\Copy File to Release Directory Executive Menu Builder\Make Run-Time Image

63 63 (4) If only changes the contents of the Platform under the BSP, using the menu Generated\Advanced Build Commands

64 64 (5) If only a part of the changes in the contents of the BSP, as well as a faster way to build

65 Compiler works Because it is new construction, we have adopted 4.2 introduced the first one kinds of methods to compile.

66 Does not load or load a driver compilation method In the BSP root directory SMDK6410.bat file, modify this file can be compiled to allow some drivers not to participate or allow participation in compiling Example Set BSP_NOCAMERA = The words were said the BSP parameters allowed CAMERA driver involved in translation, if allowed to participate in CAMERA directory compiled the following language should be used Set BSP_NOCAMERA = 1 In the BSP structure, we focused on BSP_NOCAMERA this environment variable in the negative values, so Set BSP_NOCAMERA = Indicated that the positive tone But the above language name can not be written Set BSP_NOCAMERA = 0 The following were used in this statement is a positive way of expression set BSP_AUDIO_AC97 = 1 It expressed AUDIO directory compiled using the AC97 link. Positive or negative expression has nothing to do with the naming of variables, only the registry and control compilation and formulation of the relevant Set up environment variables, using 4.2 introduced the first four kinds of methods can be compiled.

67 67

68 Load third-party executable file to the NK method For example: For example, adding GPS WinCE debugging software under the mgpscmd.exe to NK Steps are as follows (1) Copy this file to C:\WINCE600\PLATFORM\SMDK6410\FILES under. (2) Modify FILES under platform.bib.

69 69 (3) Using 4.2 introduced the first two kinds of methods can be compiled. (4) Start WINCE after the Windows directory, you can see this software is included entered.

70 SD Card boot disk to compile the required documents IROM_SD_EBOOT.nb0 is the production of SD card boot disk the required documentation, which is essentially a synthesis of BLOCK0 and EBOOT file, compile it as follows. The first step, compile the directory as shown below.

71 71 Step After compiling the above two steps, We will find the release directory appears IROM_SD_EBOOT.nb0

72 72 5. Curing and update WinCE image 5.1 Description of several files IROM_SD_EBoot.nb0 : Production SD boot disk files. Block0.nb0 : Bootloader the first level, equivalent to 2440 inside the NBOOT. Eboot.bin : Bootloader of the second level boot program for download and load the NK. NK.bin : WinCE kernel image file. 5.2 Create a boot disk for SD Card S3C6410 supports SD cards from the start, so that we can create an SD card boot disk, to cure or update the NAND FLASH inside the program, even while the JTAG burning NAND FLASH abandon the backward way. Here's tell us how to use the Samsung provided software to create SD card IROM_Fusing_Tool.exe boot disk, prior to this we have to do two things. (1) SD card inserted into the reader, and inserted into the USB port on a PC, and confirmed that SD card drive letter under Windows, where as the G drive, and formatted as FAT32 format. Particular note : The experiment found that in Vista and Windows 7 under, IROM_Fusing_Tool.exe burn unsuccessful, it is recommended to use Windows XP to create a boot disk SD Card.

73 73 (2) Ready for 4.6 s generated IROM_SD_EBOOT.nb0 file, this file can also be found in the CD- ROM, CD-ROM which is located in the "SD BOOT" directory Next, use the IROM_Fusing_Tool.exe to produce SD disc. 1) Start IROM_Fusing_Tool.exe 2) Loading of our production of documents IROM_SD_EBOOT.nb0

74 74 3) Select the drive letter where the SD card Be careful not to choose the wrong letter, so as not to cause damage to other disk. 4) Click the START button to complete the SD card boot disk production. 5) Copy block0.nb0 to the SD card root directory, pay attention, please use the CD-ROM provided by the block0.nb0, may not be used to compile the generated. Copy eboot.bin and NK.bin to the SD card root directory. The above three documents in the CD-ROM of the "NAND boot BIN file" directory can be found, you can also compile your own produce, in the project Realase directory can be found.

75 From the SD card into the NAND FLASH boot-curing process From the SD card to start, according to the following steps to carry out (1) SD card into the development board of the SD card slot. (2) Jumper setting for SD Boot. No J1 J 2 J 3 J 4 J 5 J 6 J 7 J 8 SD Boot OFF OFF OFF OFF OFF OFF OFF NC NAND Boot OFF ON OFF OFF OFF OFF OFF 3) Connect serial port to the PC, the relevant considerations, see the hardware manual Debug serial port pin definition and the use USB-to-serial cable connected with the development board 4) Using DNW0.6C to view the serial port information, related to use, see your hardware manual. 5.1 DNW0.6C instructions for use Shown by the above steps, start picture card is as follows. Before the end of the countdown to the menu, press the space bar to enter.

76 76 Here, we need [5] and [6] respectively, so that the menu is in the following state press menu to save the settings [w].

77 77 The following describes how we have come to cure or update procedures to the NAND FLASH. (1) Can be seen from the figure, Enter your selection : we import [s]

78 78 Can see that you can burn block0.nb0, EBOOT.bin, nk.bin. Block0.nb0 : This is a nand boot from the first one boot, its role is to load the eboot.bin. EBOOT.bin : Downloads NK, load and run the NK. Nk.bin: Wince image file. (2) Press [0], burn block0.nb0 to the Nand Flash.

79 79 (3) Reset, press the space bar into the Menu, press [s], then [1], burn EBOOT.bin to Nand. (4) Reset, as with the [s] by [2] burn NK.bin to the NAND.

80 From the NAND FLASH boot using the USB download NK In section 5.3, we use the SD card curing the program to NAND FLASH, now we can start the NAND FLASH. Similarly, the need to configure what is shown below pull-switch. No J1 J 2 J 3 J 4 J 5 J 6 J 7 J 8 SD Boot OFF OFF OFF OFF OFF OFF OFF NC NAND Boot OFF ON OFF OFF OFF OFF OFF Can see that should pull-switch the first two hit the ON state. Reset the development board, as shown below.

81 81 In the countdown to 0 before, press the space bar to enter the menu Eboot. Similarly, [5] and [6], respectively, making it configured as shown above, so that we can write the downloaded file in NAND FLASH. Save Settings and then [w]. Here's how to use the USB to download Block0.nb0, Eboot.bin, and NK.bin. EBOOT support block0, EBOOT own, NK updates, the keyboard input [U], if it is the first time you use USB to download, they have to install the drive, and its installation method Real6410 hardware reference manuals 5.2 and USB Driver Installation 5.3 DNW0.6C in the use of USB download

82 82 USB connection is successful, as shown below. Then through the menu, USB Port \Uboot to download the appropriate file, block0.nb0, Eboot.bin and NK can be downloaded and written to NAND FLASH.

83 83 Here, we look at the picture to download NK.

84 84 NK is writing to the NAND FLASH. After the download is complete, WinCE automatically activated. 5.5 use the network to download to update the NK Development board comes standard with a DM9000 network card, we can use it to update the NK, the use of their updated NK, need to do two aspects of configuration. (1) Configure the development board IP and MAC address On the keyboard input [0], there Enter New IP address :, here, enter your IP, and enter.

85 85 Enter the first three bytes of the IP must be the IP address of PC, consistent, that is, in the same network segment. Similarly, the keyboard according to one, enter the Subnet Mask : Similarly, the keyboard according to [7], enter the MAC address of a.bc development board. Also in the keyboard, press [8], Disable KTL Save Settings and then [w] The effect of configuration diagram is as follows.

86 86 Enter [D] at the keyboard begin to connect PC to download NK.

87 87 (2) In the VS2005 development environment to configure connection parameters. Configuration parameters as shown below..

88 88 Click setting, the following screen will appear.

89 89 Select Development Board Device Name : SMDK Click OK to return, and then click the Apply button, click close close the dialog box Connected device, as shown below,

90 90 Click the Attach Device to start the download and write NK to the NAND. Download finished, write to the NAND FLASH, Wince start automatically. 5.6 Configuration used in LCD development board Development board supports a variety of LCD, and are constantly adding new LCD support, and we in the EBOOT menu by adding the following options.

91 91 On the keyboard input [G], the following icons appear.

92 92 Here, we brought the LCD development board based model to select input. Example, if your development board is 7" INNOLUX AT070V83v.1 enter [3] and enter Save Settings and then [w]. Reset the development board, you will see your LCD to run up. 6. WinCE application software and Module Test 6.1 GPS Module Test In Windows, the GPScmd.exe, is a GPS test program, through this software can receive GPS output message and view the satellite and the current latitude and longitude, time and other information. Note: Testing GPS when the GPS antenna is required to put to outdoor non-concealed place. Income received by the satellite and satellite speed and the location of the antenna placed a great relationship.

93 93 GPS module connected to COM3, the baud rate of This test software for third-party software on the network, the company does not source code.

94 94 7. WinCE Memory Distribution and Export SDK 7.1 virtual memory mapping table SMDK6410 virtual address to physical address mapping table is as follows.

95 95 From the above we can see that memory, network cards, other chip select, IO mapping addresses, the format for the Virtual Address Physical Address Size (MB), this table is located in C:\WINCE600\PLATFORM\SMDK6410\SRC\INC\oemaddrtab_cfg.inc 7.2 WINCE Memory Distribution In this BSP in, WINCE means other than expanding the management of DRAM memory 128M, so the distribution of this memory, merely to the distribution of the former 128M. Can refer to SMDK6410 the root directory under the Config.bib file FILE

96 96 8. Export SDK, remote connection 8.1 Export SDK Select the menu item \add new SDK. Fill out the following information and click OK. Click OK, the icons are as follows.

97 97

98 98 Compile SDK. Compiled without error, we are in the following icon in the path will find the installation files for SDK. 8.2 VS2005 Remote to connect to the development board Through the Remote to connect to the development board, we can view the registry, run the screen features such as crawling WINCE. We Remote to connect to the development board using ActiveSync to connect to. Require special attention are : Because Microsoft's BUG, we have to be amended as follows In the C:\Program Files\Common Files\Microsoft Shared\Windows CE Tools\Platman\target \wce600, under a new folder and name it armv4 Copy armv4i of all content to armv4. WINCE below to grab the command to run the screen to illustrate the use of Remote.

99 99

100 100 Click Cancel Cancel, and then configure the AcitveSYNC connection, if it is ActiveSync connection, you can directly click OK.

101 101 Click OK to return.

102 102 As shown above, that is crawling to a WINCE desktop.