How to share with TM. --LOCAL (Internal Network) *Master & Slave have a same Network(Router) <Master Setting>

Transcription

1 How to share with TM --LOCAL (Internal Network) *Master & Slave have a same Network(Router) <Master Setting> 1. Turn on the receiver 2. Open the menu as following step * Main menu à Setup à Expert Settings à Communication setup 3. Turn off Use DHCP 4. Change 4 th part of IP address AND NEVER SET THE OTHERS OF IP ADDRESS Ex) (DHCP on) à (DHCP off) 5. After Save, turn the Power Off and On

2 6. Press and hold the OK button until you see the last 4 digit of IP address. * In this case, it must be showing Open the web browser in your computer (Internet Explorer, etc) 8. Enter the IP Address in the web browser (in the white box where you enter a website). The following will appear: * If you can t see static ip, it need upgrade latest version 9. Click on CCcam Edit, and then you will see this: 10. In Add Line at the bottom... type SERVER LISTEN PORT : in the white box and then click on Add Line * It can be changed Port value between ~ (recommended) 11. Click on Previous Page è

3 12. Type F: Id password in the white box and then click on Add Line * it need Id& password of slave temporarly. Id & password use only character(a,c,b,n..)& number(1,2,3.) but special character(!,@,#,$...) If Id is user1 and password is pass1 Ex) F: user1 pass Click on Previous Page 14. If you have 2 or more slaves, repeat steps 10 & 11, for example, if there are 3 slaves: F: user1 pass F: user2 pass F: user3 pass Turn the Power Off and On 16. Set on the channel for sharing

4 <Slave Setting> 1. Turn on the receiver 2. Check the IP Address. 3. Open the web browser in your computer (Internet Explorer, etc) 4. Enter the IP Address in the web browser (in the white box where you enter a website). The following will appear: * If you can t see static ip, it need upgrade latest version 5. Click on CCcam Edit, and then you will see this: 6. In Add Line at the bottom... type C: Master s IP user1 pass1 in the white box and then click on Add Line, for example: * Master s IP is and slave is No 2, therefore you should type: C: user2 pass2 * You should check Master s SERVER LISTEN PORT, see on step 12 of <Master setting> If Listen Port is 35000, type like: C: user1 pass1

5 7. Click on Previous Page 8. Turn the Power Off and On

6 --Non-LOCAL (External Network)-- <Master Setting> *Master & Slave have a diffrent Network(Router) Ex> Master in my house, Slave in friend s house 1. Turn on the receiver 2. Open the menu as following step * Main menu à Setup à Expert Settings à Communication setup 3. Turn off Use DHCP 4. Change 4 th part of IP address Ex) (DHCP on) à (DHCP off)

7 5. Turn the Power Off and On 6. Press and hold the OK button until you see the last 4 digit of IP address. * In this case, it must be showing Open the web browser in your computer (Internet Explorer, etc) 8. Enter the IP Address in the web browser (in the white box where you enter a website). The following will appear: * If you can t see static ip, it need upgrade lastest version 9. Click on CCcam Edit, and then you will see this: 10. In Add Line at the bottom... type SERVER LISTEN PORT : in the white box and then click on Add Line * It can be changed Port value between ~ (recommended) 11. Click on Previous Page

8 12. Type F: Id password in the white box and then click on Add Line * it need Id& password of slave temporarly. Id & password use only character(a,c,b,n..)& number(1,2,3.) but special character(!,@,#,$...) If Id is user1 and password is pass1 Ex) F: user1 pass Click on Previous Page è 14. If you have 2 or more slaves, repeat steps 10 & 11, for example, if there are 3 slaves: F: user1 pass F: user2 pass F: user3 pass Turn the Power Off and On 16. Link port between Router and the receiver *Check the router manual for Port forwording *If you don t have manual, Use the search engine like goolgle for help. *Type router model + port forwording on search engine like bt 2700hgv port forwording Ex)

9 <Slave Setting> 1. Turn on the receiver 2. Check the IP Address 3. Open the web browser in your computer (Internet Explorer, etc) 4. Enter the IP Address in the web browser (in the white box where you enter a website). The following will appear: 5. Click on CCcam Edit, and then you will see this: 6. In Add Line at the bottom... type C: Master s static IP user1 pass1 in the white box and then click on Add Line, for example: * Check Master s static IP in step 10 of <Master setting> * Master s static IP is and slave is No 3, therefore you should type: C: user3 pass3 * You should check Master s SERVER LISTEN PORT, see on step 12 of <Master setting> If Listen Port is 45000, type like: C: user1 pass1

10 7. Click on Previous Page 8. Turn the Power Off and On