PCS UPB Lighting Module

Transcription

1 Compass Control Module: PCS UPB Lighting 1 Compass Control Modular System Guide: PCS UPB Lighting Module KD-ZRC300 Remote Control

2 Compass Control Module: PCS UPB Lighting 2 Powerline Control Systems Lighting PCS is a wireless home automation system that allows UPB Lighting to be controlled by your control system. All features may be integrated into your Key Digital Compass Control System. Integrating UPB Lighting into a Compass Control KD- ZRC300 Modular Project In order to use our KD-ZRC300 Remote to control UPB devices, you will need the Compass Navigator software. Simply create a new modular based project by clicking File, New, and then Modular based Project. Select a location and file name and click OK. Include the KD-ZRC300 Remote Controller by clicking on the dropdown options in the Controllers (ios) section and choosing Zigbee Remote. Add the remote to the system by clicking Add ios Device to the right of the dropdown menu. Add the UPB module(s) from the Local Modules library. If you cannot see the module listed, ensure that Compass Navigator is up-to-date with the latest software version. Please Note: Pressing, then in the following commands are redundant if ID and/or Mode is set once. If different Category was selected, then user must re-select L/S/H button and LIGHT button to regain control.

3 Compass Control Module: PCS UPB Lighting 3 KD-ZRC300 remote commands for UPB Lighting Jump into Scene Control Scene Panel On Scene Panel Off Scene Panel Raise Scene Panel Lower Scene 1, then Scene 2, then Scene X X, then Jump into Single Dimmer Control (Single Light/Group) Select Dimmer to Control ID Value (0-255, according to UPB Setup) then Dimmer On Dimmer Off Dimmer Raise Dimmer Lower Set Dimmer to Value Value (0-100) then *Available after Dimmer ID has been chosen

4 Compass Control Module: PCS UPB Lighting 4 Compass Navigator Variables for UPB Module This variable is used in the module for selecting a UPB Device ID: extern string ModuleDeviceID; extern string UPB_DestinationID; extern string UPB_NetworkID; By default, these values are set to zero. To set these values, click on the page for the device on your ios device in Compass Navigator. UPB_NetworkID corresponds directly to the network ID in UPStart and UPB_DestinationID corresponds to the Unit ID, whether it is a group or individual ID. On the properties for this page (as shown to the right, type in the values for UPB_DestinationID and UPB_NetworkID in this format: UPB_NetworkID.UPB_DestinationID Example: DestinationID.NetworkID

5 Compass Control Module: PCS UPB Lighting 5 Remote Default Button Assignments ON/OFF Turns on / off selected device TV Selection Sets remote to control TV Cable Box Selection (Switch) Sets Cable Box as source for display and remote will control Cable box Blu-ray Player Selection (Switch) Sets Blu-ray Player as source for display and remote will control Blu-ray Player Audio/Video Receiver (Switch) Sets AVR as source for display and remote will control AVR DVR & Guide Used for Cable box commands Light Sets remote mode to Lighting Control Apple TV (Switch) Sets Apple TV as source for display and remote will control Apple TV Security Mode Selection Remote will control Security Light/Shade/HVAC Mode Selection Remote mode is set to LSH. MUST SELECT FROM LIGHT/SHADE/HVAC below Control Arrows and Select Navigates Up/Down/Left/Right Selects current option Exit Exits current menu for selected source Mute Mutes selected source Volume and Channel (Up/Down) Adjusts volume and Channel up and down for selected mode HVAC Sets remote mode to HVAC Control Shades Sets remote mode to Shade control Numerical Buttons (0 to 9 + Enter) Numbered buttons for general use Video Control Buttons Rewind / Stop / Play (Pause) / Fast-forward Function Button A Defaults to Red / A button for cable boxes Heat In HVAC, sets thermostat to Heat Mode Function Button B Defaults to Green / B button for cable boxes Function Button C Defaults to Blue / C button for cable boxes Cool In HVAC, sets thermostat to Cool Mode