Heimdallr Relay User Manual
|
|
- Darlene Conley
- 5 years ago
- Views:
Transcription
1 Heimdallr Relay User Manual Heimdallr RelayUser Manual Ver 1.2
2 Heimdallr Relay User Manual Ver 1.2 ii
3 Heimdallr Relay User Manual Ver 1.2 Publication History Version Date Firmware Version March September 2016 iii
4 Heimdallr Relay User Manual Ver 1.2 ABOUT THE USE OF THIS PRODUCT After unpacking this product, read the owner s manual carefully, and follow all the operating procedures and other instructions. Users of the system are responsible for checking and complying with all federal, state, and local laws and statutes concerning the monitoring and recording of video and audio signals. The Company shall not be held responsible for the use of this system in violation of current laws and statutes. ABOUT THIS DOCUMENT This manual has been compiled with great attention and care. The information it contains has been thoroughly verified. The text was complete and correct at the time of printing. Due to further product development, however, the contents of this document may change without prior notice. The Company accepts no liability for damages resulting directly or indirectly from errors, omissions, or discrepancies between this guide and the product described. All trademarks mentioned belong to their owners, third party brands, product names, trade names, corporate names and company names mentioned may be trademarks of their respective owners or registered trademarks of other companies and are used for purposes of explanation and to the owner's benefit, without implying a violation of copyright law. RELATED DOCUMENTS This document may be referenced by or may refer to the following relevant manuals: Mobile DVR Hardware Instruction Manual H.264 DVR Operation Manual iv
5 Heimdallr Relay User Manual Ver 1.2 Table of Contents Publication History...iii Table of Contents...v 1 Getting Started Heimdallr Relay Overview Hardware/OS facilities Heimdallr Relay Installation Remove Heimdallr Relay Heimdallr Client Installation Remove Heimdallr Client Heimdallr Relay & Heimdallr(client) home screen Heimdallr Relay solution chart Navigation HeimdallrRelay Main Screen Vehicle( DVR system ) Information User( Heimdallr Client ) Information Config Group Setting Vehicle Setting User Setting Login to the Heimdallr Client Heimdallr Client Main Screen Functions of Heimdallr client menu Split views control bar Vehicle DVR and camera connection GPS route and viewing screen Right-click functions Floating button functions Config mode Group Setting Vehicle Setting User Setting System Info Setting Playback Mode Search the playback file Video Control Bar Playback frames Recorded Time Scroll Bar Floating button functions Event Mode Connect Vehicle DVR with Heimdallr v
6 Heimdallr Relay User Manual Ver Vehicle DVR Setting Connect HeimdallrRelay and DVR Connect HeimdallrRelay and HeimdallrClient vi
7 Chapter 1 1 Getting Started 1
8 Heimdallr Relay User Manual Ver Heimdallr Relay Overview The Heimdallr Relay is a solution combined with relay server and client program which designed for tracking & managing vehicle DVRs activities. HeimdallrRelay is the relay server, mainly connecting, managing vehicle DVRs, managing the log-in users of different clients and forwarding messages of GPS and video files. HeimdallrRL is the client program, provides System setup, Authentication, Vehicle Cameras viewing, recording, surveillance, GPS Map, video picture capture of the connecting vehicle DVRs Hardware/OS facilities Minimum recommended hardware requirements: Maximum Support Channel quantity CPU: Pentium Dual Core E Ghz Memory: DDR2 800MHz 2GB Graphics Card: Intel G41 Express Chipset 1GB 50 channel under 64 split-screen OS: Windows XP, Window 7 32/64 bits Windows bits Chinese/English Operation System 2
9 Heimdallr Relay User Manual Ver Heimdallr Relay Installation (1) Double click the program icon to setup the Heimdallr Relay. CAUTION If the OS is Win 7 of your PC,please run the program as an administrator. If the OS is XP, double-click on the icon. (2) Windows OS platform requires that the application be run as the administrator user. Picture pops-up. (3) Click to accept the license agreement before going next step. 3
10 Heimdallr Relay User Manual Ver 1.2 (4) Browse to select folder to install HeimdallrRelay. (5) Click HeimdallrRelay to install the program. 4
11 Heimdallr Relay User Manual Ver 1.2 (6) Click to create the shortcuts in the Start Menu Folder. And click the Next to continue the setup steps. (7)Click to create the desktop icon for login Heimdallr easily. User can find the icon on the desktop screen once finished the set up procedure. 5
12 Heimdallr Relay User Manual Ver 1.2 (8) Finish the installation. Click Launch HemidallrRelay to login to the program. 6
13 Heimdallr Relay User Manual Ver Remove Heimdallr Relay Click the start & All Programs to open the HeimdallrRelay folder. Then click Uninstall HeimdallrRelay, follow the pop-up dialog windows to uninstall the program. CAUTION User can find Heimdallr Relay setting data at the path Computer. local disk ( C ) Users Administrator AppData Roaming Heimdallr even when the program had been removed Heimdallr Client Installation (1) Double click the program icon to setup the Heimdallr client program. CAUTION If the OS is Win 7 of your PC,please run the program as an administrator. If the OS is XP, double-click on the icon. (2) Windows OS platform requires that the application be run as the administrator user. Picture pops-up. 7
14 Heimdallr Relay User Manual Ver 1.2 (3) Click to accept the license agreement before going next step. (4) Browse to select folder to install Heimdallr client program. 8
15 Heimdallr Relay User Manual Ver 1.2 (5) Click Heimdallr to install the program. (6) Click to create the shortcuts in the Start Menu Folder. And click the Next to continue the setup steps. (7)Click to create the desktop icon for login Heimdallr easily. User can find the icon on the desktop screen once finished the set up procedure. 9
16 Heimdallr Relay User Manual Ver 1.2 (8) Click install to continue with the installation. (9) Finish the installation. Click Launch Hemidallr to login to the program. 10
17 Heimdallr Relay User Manual Ver Remove Heimdallr Client Click the start & All Programs to open the Heimdallr folder. Then click Uninstall Heimdallr, follow the pop-up dialog windows to uninstall the program. 11
18 Heimdallr Relay User Manual Ver 1.2 CAUTION User can find Heimdallr (client) setting data at the path Computer. local disk ( C ) Users Administrator AppData Roaming Heimdallr even when the program had been removed. 12
19 Heimdallr Relay User Manual Ver Heimdallr Relay & Heimdallr(client) home screen The home screen is a start point to give you instant access to Heimdallr screen and client programs. HeimdallrRelay home screen: HeimdallrRL (Client) home screen : 13
20 Heimdallr Relay User Manual Ver Heimdallr Relay solution chart The Heimdallr Relay is a solution combined with relay server and client program which designed for tracking & managing vehicle DVRs activities. HeimdallrRelay is the relay server, mainly connecting, managing vehicle DVRs, managing the log-in users of different clients and forwarding messages of GPS and video files. HeimdallrRL is the client program, provides System setup, Authentication, Vehicle Cameras viewing, recording, surveillance, GPS Map, video picture capture of the connecting vehicle DVRs. 14
21 Chapter 2 2 Navigation 15
22 2.1 HeimdallrRelay Main Screen Double click the icon to go into the HeimdallrRelay Main Screen. The following table shows the function of each number. Number Button Name Function/Description 1 Click to start Relay server. 2 Click to stop Relay server. 3 Click to do Group Setting, Vehicle Setting and User Setting. 4 Showing the vehicle information of vehicle DVR. 5 Showing the user information of Heimdallr clients. 6 Click to exit the HemdallrRelay server program. 16
23 2.1.1 Vehicle( DVR system ) Information Select the group from the drop-down menu. The DVR information of the selected group will be listed down which includes : DVR Description, User Name, Model Number, Channel Number and Connection Status. Column Name DVR Description. Function/Description The name of the user who log-in to this DVR The DVR model number Recording camera quantity of the DVR Connection status between DVR and Heimdallr Relay Server. Blue color stands for valid connection User( Heimdallr Client ) Information The Heimdallr Clients information which includes : Client Description, User Name and Connection Status. Column Name Function/Description Description of log-in Heimdallr clients User Name of log-in Heimdallr clients Connection status between Heimdallr clients and Heimdallr Relay Server. Blue color stands for valid connection. 2.2 Config Click the button to set up the Heimdallr Relay settings. 17
24 Number Button Name Function/Description 1 Click to Add/Delete/Modify the Heimdallr Relay setting. The detail information will be explained at chapter 2.2.1~ Showing the Heimdallr Relay program information. 3 Click to enable the setting then exit this config screen. 4 Click to enable the setting & stay at this config screen 5 Click to cancel the setting then exit this config screen Group Setting Click the Group Setting to define all your DVRs as different groups via Add Group, Delete Group and Modify the Group information at this system. 18
25 Add Group While adding a new group at this system, please fill in the blanks with its Name / Address and Contact info. User can define the group name as different fleets group. Delete Group Select to delete one or more groups from the group list. Click Yes to delete all Vehicle(DVRs). Click No to move all Vehicle(DVRs) of this group to the default group. Click Cancel to stop deleting the group and exit this setting screen. 19
26 Modify Group Double click or select one group from the group list then modify its setting. CAUTION User must click the OK or, Apply button of the config screen to enable the add/delete/modify group setting Vehicle Setting Click the Vehicle Setting to Add/Delete/Modify the vehicle DVR information. Only with completed set up at this section, Heimdallr Relay server can successfully processing its function of those vehicle DVRs. 20
27 Add Vehicle Click Add Vehicle button, a dialog pups up as following: 21
28 Number Vehicle Info Function/Description 1 Enable 2 Select Group 3 4 Description UserName Password Confirm PW Model Channel Count 5 Video Param Click to show this vehicle DVR info within the vehicle group list. Click to choose the group or keep using the default as the group name for this new Vehicle DVR Fill in the vehicle DVR s information includes its description, user name and password. The filled up words must be less than 30 characters Click to choose the model name then its camera quantity drop-down menu will be list below. 4 -channel cameras for Model504/505/806/868/ channel cameras for Model508/808/ channel cameras for Model516/816 Click to choose the FPS(Frames Per Second) / Resolution of video transmission. Click Apply button to valid the setting parameter. 6 Add Click to add the vehicle DVR. 7 Cancel Click to cancel of adding the vehicle DVR. Delete Vehicle Select to delete one or more vehicle DVR from the list. Click Yes to delete all Vehicle(DVRs). Click No to stop deleting. System will pop-up the reminding windows to let user confirm that if they would to deleted more than 5 vehicle DVR one time. 22
29 Modify the password of Vehicle DVR Double click or select one vehicle DVR from the group list then change its description password setting. CAUTION User must click the OK or, Apply button of the config screen to enable the add/delete/modify vehicle DVR setting. 23
30 2.2.3 User Setting Click the User Setting to Add User, Heimdallr User list represents all the Heimdallr client systems. Via this setting, user can Add, Delete and Modify the User ID/Description and User Name of each Heimdallr client system. Add User 24
31 Delete User Number Vehicle Info Function/Description 1 Description UserName Password Confirm PW 2 Authority 3 Add 4 Cancel Fill in the Heimdallr client system information includes its description, user name and password. The filled up words must be less than 30 characters Authorize viewing the client systems. Click Select al l to view the all systems. Click to add the Heimdallr client to the user list and exit the setting menu. Click to cancel of adding the Heimdallr client to the user list and exit the setting menu. Click the user from the list then click the Delete User button. Then click the Yes of the pop-up window to confirm the deleting client user. Please be noted that admin is the default user from the system and it can not be deleted from the list. Modify User Double click the user or click the user from the list & click the Modify User button to change the user description and change its password. 25
32 2.3 Login to the Heimdallr Client After installed the program, double click the Heimdallr icon from the desktop. There will be a pop-up dialogue for user to login to the server or client program. Server Mode:Click to login to the HeimdallrRL (Relay server). Client Mode:Click to login to the Heimdallr Client which supports Heimdall Relay server. Server Address:Please fill the IP address of HeimdallrRelay server. UserName:The user been added via HeimdallrRelay \UserSetting. Password : The password be setup at HeimdallrRelay \UserSetting. The default UserName and Password are both admin. Users ( different user name) are allowed to log-in to the client program simultaneously. 26
33 2.4 Heimdallr Client Main Screen The Heimdallr client main screen will be seen as following: Functions of Heimdallr client menu The following table shows the function of each number. Number Button Name Function/Description 1 Viewing real-time image & map of the vehicle DVRs Search the event list via Normal/ GPS/Playback-list log. Please refer to the chapter 2.7 Retrieve historical recorded images & route map. Please refer to the chapter 2.5 Add/Delete/Modify the Vehicle / Group /User setting & setting of System info. Please refer to the chapter 2.2 &2.3 Snapshot: Click to take the snapshot of the viewing screen and route map. 6 PTZ control, (coming soon) 27
34 Number Button Name Function/Description 7 Dual Audio(coming soon) Click to pop-up the information of the vehicle & DVR Split views control bar The following table shows the function of each number. Number Button Name Function/Description 1 Click to the first page of the channels split views 2 Click to last page of the channels split views 3 Click to next page of the channels split views 4 Click to the last page of the channels split views 5 Enter the number and click go to that page of the split view 6, 7, 8, 9, 10,11,12,13 single-channel, 4-channel, 6-channel,9-channel split-view 13-channel,16-channel,32-channel,64-channel split view Vehicle DVR and camera connection This area listed out the connecting status of the vehicle DVRs and cameras. User can click - & + to have downward or upward connection status. 28
35 No. Icon Description 1 The fleet (vehicle) group 2 Connected Vehicle DVR 3 Connected Camera 4 Disconnected Camera 5 Disconnected Vehicle DVR GPS route and viewing screen 1:Drag and drop the connected vehicle DVR ( ex. ) to the split-screen of live view screen at the right part of the main screen. The GPS route of this DVR will be showed as following. 2:Drag and drop the connected camera( ex. ) to the split-screen of live view screen at the right part of the main screen. The live viewing of this camera will be showed as following. 3: Not Connected means vehicle DVR is disconnected (ex. ) 4 Video Loss means channel camers is disconnected (ex. ) 29
36 The Map view displays the time-history of vehicle s journey (route) position. 1. Select area: Click the rectangle then move the mouse to indicate the area that you would like to know if the vehicle route appear here. ( the percentage will become much bigger than the previous view of the map. Click the hand to stop indicating the area. 2. Zoom in / Zoom Out : Click + or - to zoom in or zoom out the map view. 3. Route info: System will display the vehicle ID, Speed and recorded time of the PVF file. 4. SetMap: Right click the mouse to set GPS routes of multiple vehicle DVRs at the same map. 30
37 2.4.5 Right-click functions Right-click the GPS route and viewing screen to go into the quickly setup menu. Menu Function/Description Click to view the selected camera Click to view in 4-channel split-view Click to view in 6-channel split-view Click to view in 9-channel split-view Click to view in 13-channel split-view Click to view in 16-channel split-view Click to view in 32-channel split-view Click to view in 64-channel split-view Click to view specific one camera view Click to set viewing of the GPS route Click to set viewing of the recording image Click to clear the screen Set Map Click Set Map & choose the DVR user name form the Vehicle menu. Click OK to show the GPS route of the viewing screen Set Map Click Set Video & choose the DVR user name form the Vehicle menu. And click the camera channel number. Click OK to show the video of this camera at the viewing screen. 31
38 2.4.6 Floating button functions Move the mouse to the viewing screen under Preview mode. There will be 4 floating buttons at the left-up corner. Number Button Name Function/Description 1 2 Click to get Vehicle DVR information of viewing image. (coming soon) Click to play the Voice of viewing image. The icon will be in blue color. Click to take the snapshot(picture) of viewing channel or viewing main screen. It will pop-up following window to confirm that the snapshoot photo had been captured successfully. 3 4 Click to start Recording of viewing image. The icon will be in blue color Click the icon again to finish the recording. 2.5 Config mode Click on the Control Bar to enter Config setting menu 32
39 Number Button Name Function/Description 1 Click to go into the Group, Vehicle, User Setting and System info. Please refer to the chapter 2.2.1~ Showing the program information. 3 Click to enable the setting then exit the window. 4 Click to enable the setting & stay at the window. 5 Click to cancel the setting then exit the window Group Setting While using the Relay Server, the Add/Modify/Delete function are invalid in Group Setting Vehicle Setting While using the Relay Server, the Add/Modify/Delete function are invalid in Vehicle Setting User Setting While using the Relay Server, the Add/Modify/Delete function are invalid in User Setting. 33
40 . CAUTION The Group Setting / Vehicle Setting / User Setting of HeimdallrRelay server and Heimdallr client system will be synchronized. User will see the finished setting result at both server and client system once they set at one of them System Info Setting Click to setup the setting of the Hemidallr client system. Number Button Name Function/Description 1 The default Port No. is The path to save the snapshot file, click Browse to change the path. 3 The default file type is.bmp 4 The path to save recorded file, click Browse to change the path. 5 User can choose to save the file at.avi or.pvf type 6 The version information about the Hemidallr program. CAUTION User must click the OK or, Apply button of the config screen to enable the setting. 34
41 2.6 Playback Mode Click on the Control Bar to enter Playback menu The following table shows the function of each number. Number Function Description 1 2 Search Criteria & Search Result Recorded time scroll bar 3 Video control bar 4 Playback frames Search the playback file Search Criteria Click to specify the searching criteria of the recorded image. Event-log will be listed out after clicking the Search button The horizontal scroll bar for search the recorded data of specific time by mouse Plays forward faster, Plays forward,start/pause the video playback, Plays backward, Plays backward faster Retrieve historical recorded images includes the GPS route of selected vehicle Click to take the snapshot(picture) of viewing channel or viewing main screen. Start Time : click the calendar menu to select the date and time when the event took place. 35
42 End Time : click the calendar menu to select the date and time when the event stopped recording. Select Vehicle: click the select the vehicle (DVR) form the connected DVR list. Search Result Event Serial: Series Number of recorded data provide by system Event Time: The Time event took place Record End Time: The time event recording stopped NOTE Click to retrieve the specific even video from the search result list Video Control Bar Click to play/pause/play forward faster/play backward faster /play forward /play backward of the event that has been selected Button Funciton/Description Click to play the recorded file form the file log list. And the control bar will keep at pause status icon. Click to play previous recorded file from the file log list Click to play next recorded file from the file log list Click to rewind at 1/2/3/4/5 times. Click to play forwarder faster at 1/2/3/4/5 times Playback frames Double click the file from the recorded file log list or click specific file then click to retrieve historical recorded images includes the GPS route of selected vehicle DVR. 36
43 The default play back screen will be 6-split view. 4-channel cameras will be with 6- split view. 8-channel cameras will be with 9-split view. The default setting of 1 st split view is GPS route map. Double click the specific view to zoom-in the single view & the selected view will be with blue frame Recorded Time Scroll Bar Click to view the recorded data of specific time by mouse The scroll bar will begin at 00:00 of the date user clicked at the Start Time The scroll bar will end at 00:00 of the next date user click at the End Time The purple area is the time which with recording video. Then black area is the time without recording video. The green line points out the time which current playback view Floating button functions Move the mouse to the viewing screen under Preview mode. There will be 4 floating buttons at the left-up corner. The details will be same as chapter Event Mode 37
44 Click on the Control Bar to enter Event Viewer menu StartTime: indicates the start time of events took place. The user can click to choose the year, month & date from the Calendar Menu EndTime: indicates the end time of events ended. The user can click to choose the year, month & date from the Calendar Menu Vehicle: Specifies the vehicle (DVR ) which events took place Event Type: Filters event log by type. Event logs are classified as NONE, General Event Log, Record Event Log, Hardware Event Log, Warning Event Log, Speed Event Log, Collision Event Log, Temperature Event Log, Voltage Log. Search: Click to list out the search result. Search result list: Different event will be corresponding to different parameters Event Type General Event Log Record Event Log Hardware Event Log Warning Event Log Speed Event Log Collision Event Log Temperature Event Log Voltage Event Log Corresponding parameter 38
45 2.8 Connect Vehicle DVR with Heimdallr Vehicle DVR Setting Turn of the vehicle DVR which you would like to connect with Heimdallr Replay Server. Go to Main Menu Hardware Setup Network Setup Event Notification Setup CMS Server Setup. Activate Service Click Enable to connect this vehicle DVR with Heimdallr Relay Server. Server Address Fill in the Heimdallr Relay Server IP address. Port The default Port number is Login ID Set the ID name of this vehicle DVR. This login ID must be identical with the UserName you fill at Heimdallr Relay Server ( or Client )Vehicle Setting. 39
46 Login Password Set the Password of this vehicle DVR. This login password must be identical with the Password you fill at Heimdallr Relay Serer ( or Client ) Vehicle Setting. CAUTION After setting, user should click EXIT & Save the setting of the DVR setting menu to enable the changed setting Connect HeimdallrRelay and DVR Start Heimdalr Relay program. 1 Click HeimdallrClient-> Config->System Info->Port. And set the Port at Click HeimdallrRelay(or HeimdallrClient)->Config->Vehicle Setting->Add Vehicle. Set the user name and password of the DVR and click OK(Apply ) to enable the setting. 3.Click the Start Sever button of HeimdallyRelay main screen. CAUTION User must click the OK or, Apply button of the config screen to enable the add/delete/modify vehicle DVR setting Connect HeimdallrRelay and HeimdallrClient Click the Start Sever button of HeimdallyRelay main screen to enable the server. 1. Default Setting user name and password Connect the default HeimdallrClient as user name / password are both admin 2 Set the new user name and password 40
47 Use the new setting user name & password from UserSetting of HeimdallrRelay. 3 Multiple Heimdallr Clients connect to same HeimdallrRelay Server. 41
Heimdallr RL User Manual
Heimdallr RL User Manual Heimdallr RL User Manual Ver 1.2 Heimdallr RL User Manual Ver 1.2 ii Heimdallr RL User Manual Ver 1.2 Publication History Version Date Firmware Version 1.11 10 March 2016 1.2 06
More informationIMS Client Operation Guide Version V1.1 Date
Version V1.1 Date 2015-10-20 About This Document About This Document About This User Manual Please note the following points before using this user manual: This user manual is intended for persons who
More informationMobile DVR Record File Manager Software User s Manual
Mobile DVR Record File Manager Software User s Manual Version 1.0.0 Table of Contents 1 General Introduction...4 1.1 Overview...4 1.2 General Performance...4 2 Installation...5 2.1 Installation Steps...5
More informationS-Series Multi-Site Client Software OPERATION MANUAL
S-Series Multi-Site Client Software OPERATION MANUAL Copyright 2005 All rights reserved Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under
More informationCMS USER S MANUAL VER:
CMS USER S MANUAL VER: 1.0 2009-1-6 1 INDEX INDEX... 2 Preface... 3 1. Introduction... 4 2. Install and uninstall CMS... 4 2.1 System requirement... 4 2.2 Computer Hardware Requirements... 5 2.3 Process
More informationPIVOT CMS CLIENT SOFTWARE USER MANUAL
PIVOT CMS CLIENT SOFTWARE USER MANUAL 1 CMS USER GUIDE 1.1 PC REQUIREMENT Recommended PC Requirement OS CPU VGA RAM HDD Graphics Card OS CPU VGA RAM HDD Windows Vista, 7 or higher Intel Core2Quad Q9400
More informationMulti-NVR Manager. Quick Start Configuration Usage
Multi-NVR Manager Quick Start Configuration Usage 2014. All rights are reserved. No portion of this document may be reproduced without permission. All trademarks and brand names mentioned in this publication
More informationSPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY.
COPYRIGHT 2010 by AVerMedia Information, Inc. All right reserved. Reproduction without permission is prohibited. No part of this document may be reproduced or transmitted in any form, or by any means without
More informationDCMS. User Manual. Version V1.0
DCMS User Manual Version V1.0 About This Document About This Document About This User Manual Please note the following points before using this user manual: This user manual is intended for persons who
More informationManual Version: V1.01. ISS Manager Video Management Software User Manual
Manual Version: V1.01 ISS Manager Video Management Software User Manual Notice The information in this manual is subject to change without notice. Every effort has been made in the preparation of this
More informationManual Version: V1.15. Video Management Software Guard Station User Manual
Manual Version: V1.15 Video Management Software Guard Station User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. Disclaimer
More informationCentral Management Software for NVR-915 / NVR-1615 CV5-M256
Central Management Software for NVR-915 / NVR-1615 Table of Contents Chapter 1. Main Console... 4 1.1 Tool Bar... 4 1.2 NVR List... 5 1.3 Division List... 7 1.4 Group List... 9 1.5 PTZ Panel...11 1.6 Operation
More information1. Web Viewer program
1. Web Viewer program 1-1. General Remote DVR can be connected via network using IE (Internet Explorer) without prior installation of monitoring program. Live monitoring, remote playback, backup and PTZ
More informationCMS operation instruction. Video Surveillance Management Platform Operation Instruction
Video Surveillance Management Platform Operation Instruction 1 Item 1 System function overview...3 2 System environment requirements...3 3 Software installation and uninstall... Hiba! A könyvjelző nem
More informationAVer iviewer. for Andorid System Quick User Guide
AVer iviewer for Andorid System Quick User Guide I. Using Android system to Access Remote DVR Server Using the mobile phone that is Android system can connect to remote DVR server through the Internet
More informationNetClient software user manual
NetClient software user manual 1-1. General information Net Client is an application which provides users not only viewing and controling remote DVRs, but also receiving realtime event data or alarm signals
More informationEZ-iVMS Client Software. Quick Start Guide
EZ-iVMS Client Software Quick Start Guide Notices The information in this documentation is subject to change without notice and does not represent any commitment. Liability whatsoever for incorrect data
More informationPCMS User Manual. User Manual PCMS. A-Series DVR (Cloud)
PCMS User Manual A-Series DVR (Cloud) User Manual PCMS User Manual PCMS A-Series DVR (Cloud) 1 PCMS User Manual A-Series DVR (Cloud) Contents 1. Brief Introduction... 3 2. Application... 3 3. OS Compatibility...
More informationViewer for Luma Fisheye IP Surveillance Camera. Software Manual
Viewer for Luma Fisheye IP Surveillance Camera Software Manual Important Notes This software is a third-party program that allows you to view, in a normal view, surveillance recordings that were made in
More informationFigure 4-9. Click Finish button, system pops up a dialogue box. Click the OK button, the startup wizard is complete. See Figure 4-10.
For detailed information, please refer to chapter 4.11.4.1.1. Figure 4-9 Finish button, system pops up a dialogue box. the OK button, the startup wizard is complete. See Figure 4-10. Figure 4-10 4.4 Preview
More informationCentralized Monitoring Management Platform. Manual
Centralized Monitoring Management Platform Manual 3 Contents 1. Products... 5 1.1. Summary... 5 1.2. Application Environment... 5 1.3. Install and uninstall... 6 2. Centralized Monitoring Management Platform
More informationControl Software centralized HEM. User Manual
Control Software centralized HEM User Manual Page: - 2-1. Product Overview This software (HEM-HyperElectronicsMappers) for remote control is designed to be installed into a PC for use within a surveillance
More informationUser s Manual. Surveillance Client PC Software for Windows OS & Mac OS Central Management Software. Surveillance Client
User s Manual Surveillance Client PC Software for Windows OS & Mac OS Central Management Software Surveillance Client Contents 1 Product Description...4 1.1 Important Disclaimer...4 1.2 Software Related
More informationAVerMedia. CM3000 Central Management System. User Manual
AVerMedia CM3000 Central Management System User Manual DISCLAIMER No warranty or representation, either expressed or implied, is made with respect to the contents of this documentation, its quality, performance,
More informationUser Manual. Central Monitoring Software for TER-series recorders. CenPro
EN User Manual Central Monitoring Software for TER-series recorders CenPro Contents CENPRO USER MANUAL 1 PC REQUIREMENT 3 2 INSTALL 3 3 UNINSTALL 5 4 BASIC OPERATION 7 4.1 Log In 7 4.2 Screen Layout 8
More informationDigital Video Surveillance User Guide
Digital Video Surveillance User Guide 6/26/2008 1 Logging in Click "Start"--"Programs"--"DVR". A main screen will appear as follows: Most of the buttons are disabled initially, and only live video can
More informationNVMS1000. User Manual
NVMS1000 User Manual Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall the Software...
More informationUser Manual. CENTRAL MANAGEMENT SYSTEM of H.264 DIGITAL VIDEO RECORDER
User Manual CENTRAL MANAGEMENT SYSTEM of H.264 DIGITAL VIDEO RECORDER 1 TABLE of CONTENTS I. SYSTEM REQUIREMENTS...3 A. MINIMUM REQUIREMENTS...3 B. SUGGESTED REQUIREMENTS...3 II. CENTRAL MANAGEMENT SYSTEM
More informationDigital Video Surveillance Center Management Software
Digital Video Surveillance Center Management Software NVClient User Manual Revision: V3.2 Updated: 12-2011 Contents Chapter I General...- 3-1.1 INTRODUCTION... - 3-1.2 MAIN FUNCTIONS... - 3 - Chapter II
More informationQuick Start Guide (V1.03) UD.6L0201B1064A01
ivms-4200 PCNVR Quick Start Guide (V1.03) UD.6L0201B1064A01 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact the dealer. This manual applies
More informationLocal Playback Software User Manual
Local Playback Software User Manual UD.6L0202D1299A01 Thank you for purchasing our product. This manual applies to Local Playback software, please read it carefully for the better use of this software.
More informationVentra XDR-450/H Mobile DVR Software Manual
Ventra XDR-450/H Mobile DVR Software Manual 5CH Hybrid Mobile DVR This manual is only for the XDR software. For Hardware manual, please refer to XDR User Guide Ventra Technology Inc www.ventrainc.com info@ventrainc.com
More informationSiera CMS Panther v3.0
1 This manual maybe exist inexact in technology, product feature, operation discrepancy or misprint. The content of the manual will renew according to the product function enhance, and regular change or
More informationCMS USER S MANUAL VER:
CMS USER S MANUAL VER: 1.0 2009-1-6 1 INDEX INDEX... 2 Preface... 3 1. Introduction... 4 2. Install and uninstall CMS... 4 2.1 System requirement... 4 2.2 Computer Hardware Requirements... 5 2.3 Process
More informationNVMS User Manual
NVMS-1000 User Manual Contents 1 Software Introduction...1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall the Software...
More informationBlackHawk for MAC Software User Guide
BlackHawk for MAC Software User Guide Products: BLK-DH2 Series and BLK-HD Series DVRs Please read this manual before using your software, and always follow the instructions for safety and proper use. Save
More informationSurveillance_client Software Operation Manual
Surveillance_client Software Operation Manual Contents 1 Product Description... 3 1.1 Important Disclaimer... 3 1.2 Software Related Files...3 1.2.1 Software Installation Directory... 3 1.3 Application
More informationNVMS1000. User Manual
NVMS1000 User Manual Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall the Software...
More informationNVMS User Manual. Version 2.1.0
NVMS-1000 User Manual Version 2.1.0 Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall
More informationCMS PRO Software Manual - Beta. Copyright Digimerge 2010
CMS PRO Software Manual - Beta Copyright Digimerge 2010 [CMS] Manual (Revision Record) Revision Record Date Description Author Version 2010. 02. 05 Development Version 2/66 [CMS] Manual (Contents) Contents
More informationVMS2.0 Client Software. User Manual
VMS2.0 Client Software User Manual Chapter 1 Contents Brief Introduction...1 1.1 Description... 1 1.2 Running Environment...1 Chapter 2 Installation... 2 Chapter 3 Live View... 4 3.1 User Login...4 3.2
More informationRAS (Remote Administration System)
RAS (Remote Administration System) Digital Video Recorder Software User Guide Document 900.0314 Rev 2.00 RAS User Guide Revisions Issue Date Revisions 1.00 08/04 New document. 1.01 04/05 Update template,
More informationDiViS Net (Integration)
DiViS Net (Integration) Installation and User s Guide Ver 12.00.1 Digital Video Security System Digital Video Recorder www.divisdvr.com Chance-i USA Corp. *All contents of this document may change without
More informationHikCentral Control Client. User Manual
HikCentral Control Client User Manual Legal Information User Manual 2018 Hangzhou Hikvision Digital Technology Co., Ltd. About this Manual This Manual is subject to domestic and international copyright
More informationCMS Client Software Operation
CMS Client Software Operation 1. Download CMS...2 2. Add,delete,connect the NVR IP...2 2. View many DVR images at the same time...3 3. Intercom...5 4. Capture...6 5. PTZ control...6 6. NVR Status...7 7.
More informationMinimum Requirements. Recommended Requirements
OpenEye EasyMobile 2 Android Software Manual (v1.0.12.01) Manual Edition 30869AD FEBRUARY 2015 The OpenEye Android EasyMobile 2 App software allows you to access your EasyDVR or EasyNVR recorder from almost
More informationNVMS User Manual
NVMS-1000 User Manual Contents 1 Software Introduction...1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall the Software...
More informationIWH3216 Touch/Touch II
IWH3216 Touch/Touch II 16CH Embedded Hybrid DVR Quick User Guide COPYRIGHT 2012 AVer Information Inc. All rights reserved. No part of this document may be reproduced or transmitted in any form, or by any
More informationRemoteManager Software
RMS RemoteManager Software User Manual Contents of this user manual are protected under copyrights and computer program laws. Functions or configurations are subject to be changed or modified without prior
More informationExxi Net (Integration)
Exxi Net (Integration) Installation and User s Guide Ver 11.06.x Digital Video Security System Digital Video Recorder www.exxicom.com *All contents of this document may change without prior notice. INDEX
More informationLOREX CLIENT 3.0 SOFTWARE MANUAL IRMS Integrated Remote Management Software
LOREX CLIENT 3.0 SOFTWARE MANUAL IRMS Integrated Remote Management Software Instruction Manual English Version 2.0 Copyright 2007 Lorex Technology Inc. www.lorexcctv.com Table of Contents Overview... -
More informationUSER MANUAL. Mac Version
USER MANUAL Mac Version Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Install and Uninstall... 1 1.2.1 Install the Software... 1 2 Login Software... 3 2.1 Login... 3 2.2 Control Panel Instruction...
More informationManual Version: V1.01. Video Management Server Client Software User Manual
Manual Version: V1.01 Video Management Server Client Software User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. Notice
More informationCentral Management Software. Cam Viewer 3 Lite. User Manual
Central Management Software Cam Viewer 3 Lite User Manual Version 1.0.0 Table of Contents 1. System Requirement...4 2. Software Installation...5 3. Configuration Wizard...9 3.1 Channel...10 3.1.1 Adding
More informationRemote DVR Manager. User s Guide. v 1.1
Remote DVR Manager User s Guide v 1.1 DVR Manager TABLE OF CONTENTS OVERVIEW...5 1. PC system requirements...5 2. Installing Program... 6 DVR Manager Monitor...8 3. Screen mode...8 3.1. Screens split...
More informationVideo Management Software
Video Management Software User Manual Web: europesecurity.eu Mail: info@europesecurity.eu Tel.: 0541 352 952 User s Manual 2 Contents CHAPTER : XMS CENTRAL USER MANUAL 1 PC REQUIREMENT 3 2 INSTALL 3 3
More informationCentral Management System
Central Management System For E5016 User s Manual V1.1.0.0 COPYRIGHT 2013 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted
More informationPC NVR Professional Software
PC NVR Professional Software Free Bundle Rev. 1.5.1 Thanks for adapting our product. Before install the software, please read the instructions carefully and keep this manual for future reference. i Table
More informationPlayer Operation User s Manual
Player Operation User s Manual Version 1.0.0 Table of Contents 1 General Introduction...1 1.1 Overview...1 1.2 Features...1 2 Installation...2 2.1 Open Player...5 3 Operation...7 3.1 Main Interface...7
More informationMAC ACS CLIENT SOFTWARE USER MANUAL
MAC ACS CLIENT SOFTWARE USER MANUAL 1 MAC ACS USER GUIDE 1.1 System Requirement Recommended System Requirement OS CPU VGA RAM HDD OS CPU VGA RAM HDD Mac OS X 10.6(snow leopard) Built-in Intel CPU MAC Recommended
More informationProduct and company names appearing in this document are trademarks of each respective company or organization.
. CMS_beta LEGAL INFORMATION Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of the company is prohibited.
More informationUser Manual. CENTRAL MANAGEMENT SYSTEM of H.264 NETWORK VIDEO RECORDE H.264 DIGITAL VIDEO RECORDER
User Manual CENTRAL MANAGEMENT SYSTEM of H.264 NETWORK VIDEO RECORDE H.264 DIGITAL VIDEO RECORDER 1 TABLE of CONTENTS I. SPECIFICATION... 3 II. HARDWARE REQUIREMENTS... 5 A. MINIMUM REQUIREMENTS... 5 B.
More informationPS-4700/4800Series User ユーザーマニュアル Hardware Manual Manual
PS-4700/4800Series シリーズ User ユーザーマニュアル GP-4000 Pro-face Manual Series Remote HMI Server Hardware Manual Manual (Atom N270/Core 2 Duo 2 Duo P8400 P8400 Pre-installed 搭載モデル Model) ) Preface Thank you for
More informationLorex Client 7.0 & Lorex Message Master
Lorex Client 7.0 & Lorex Message Master Software Manual English Version 1.0 MODELS: L19WD Series www.lorexcctv.com Includes L19WD800 & L19WD1600 Copyright 2008 Lorex Technology Inc. Table of Contents Table
More informationContents. 1 Introduction... 4
DMS64 User Manual Contents 1 Introduction... 4 1.1 Summary... 4 1.2 System Requirements... 4 1.3 Installing Guide... 5 1.4 Reinstalling Guide... 8 1.5 Device Register... 10 1.6 DMS64 Display Mode... 16
More informationCOMMAND STATION PC SOFTWARE
COMMAND STATION PC SOFTWARE MULTI-SITE MANAGEMENT SOFTWARE USER MANUAL Version 1.6 OpenEye Command Station Software Manual V 1.6 Manual Edition 34863AI - June 2018 2018, OPENEYE All Rights Reserved No
More informationUser`s Manual. CMS Pro. Professional Central Monitoring Software. Full-featured Enterprise Class Surveillance Solution
Professional Central Monitoring Software CMS Pro Full-featured Enterprise Class Surveillance Solution User`s Manual This document contains preliminary information and is subject to change without notice.
More informationUser Manual. For. CMS (WEB version)
User Manual For CMS (WEB version) Contents 1 Preface...1 1.1 System requirements... 1 1.2 Main features... 2 2 Server Installation...3 2.1 System requirement... 3 2.2 Installation... 4 2.2.1 Complete...5
More informationIVS2000 video monitoring Instruction manual
IVS2000 video monitoring Instruction manual Statement Because the product version upgrade or other reasons, this manual content may change. We will keep the right to change the contents of this manual
More informationNVMS-5000 NVMS User Manual
NVMS-5000 NVMS-5000 User Manual NVMS-5000 User Manual Contents 1 Introduction... 4 1.1 NVMS-5000 Brief Introduction... 4 1.1.1 Summerization... 4 1.1.2 Software Architecture... 4 1.2 System Components...
More informationDiViS Net (Integration)
DiViS Net (Integration) Installation and User s Guide Ver 12.12.0 Digital Video Security System Digital Video Recorder www.divisdvr.com DiViS DVR.com *All contents of this document may change without prior
More informationVideo Capture Card Manual
Video Capture Card Manual 1. System Login System installation is completed, will generate desktop < DVR Surveillance System> icon, please double-click operation. Or choose Start -> All Programs -> DVR
More informationDahua Technology Co., Ltd DSS Professional Quick Start Guide DSS PROFESSIONAL 快速应用指南
DSS PROFESSIONAL 快速应用指南 1 Content 1 Configuration Flow Chart... 1 2 Pre-installation Preparation... 2 2.1 Configure the IP address of sever... 2 2.2 Configure the system time of server... 3 3 Install &
More informationLocal Playback Software User Manual V1.0
Local Playback Software User Manual V1.0 Index Chapter 1 Introduction... 3 1.1 Overview... 3 1.2 System Requirements... 3 Chapter 2 Install & Uninstall... 4 2.1 Install the Software... 4 2.2 Uninstall...
More informationUser s Manual of DVR ULTIMAX. Remote Client Software V wersja 2.40
User s Manual of DVR ULTIMAX Remote Client Software V 4.0.1 ULTIMAX-304 ULTIMAX-308 ULTIMAX-316 ULTIMAX-504 ULTIMAX-508 ULTIMAX-516 ULTIMAX-704 ULTIMAX-708 ULTIMAX-716 wersja 2.40 Index 1 Software Install,
More informationEH6000H series EH6108H + /EH6216H + Quick User Guide
EH6000H series EH6108H + /EH6216H + Quick User Guide COPYRIGHT COPYRIGHT 2011 AVer Information Inc. All rights reserved. No part of this document may be reproduced or transmitted in any form, or by any
More informationUser Manual of VSPlayer Software. VSPlayer Software. User Manual UD06784B
VSPlayer Software User Manual UD06784B i User Manual COPYRIGHT 2017 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures,
More informationGE Security. Digia Client. User Manual. imagination at work
GE Security Digia Client User Manual imagination at work Copyright Disclaimer Trademarks and patents Software license agreement Intended use Contact Copyright 2004, GE Security Inc. All rights reserved.
More informationThe SW can manage 16CH devices and support 16Ch live view simultaneously. Supported functions are
RMS User Manual 1. Introduction 1.1 Introduce This SW can manage and control several DVRs from Remote site through network at the same time. This SW provides live image monitoring, Playback and DVR configuration.
More informationVSPlayer Software User Manual
VSPlayer Software User Manual UD03888B User Manual COPYRIGHT 2016 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures,
More informationDahua Player3.1 Operation User s Manual
Dahua Player3.1 Version 1.0.0 Table of Contents 1 General Introduction... 1 1.1 Overview... 1 1.2 Features... 1 2 Installation... 2 2.1 Open Player... 5 3 Operation... 6 3.1 Main Interface... 6 3.2 Menu...
More informationQuick Start Guide GV-VMS
Quick Start Guide GV-VMS Thank you for purchasing GV-VMS. This guide is designed to assist the new user in getting immediate results from the GV-VMS. For advanced information on how to use the GV-VMS,
More informationALIBI Witness 2.0 v3 Smartphone App for Apple ios Mobile Devices User Guide
ALIBI Witness 2.0 v3 Smartphone App for Apple ios Mobile Devices User Guide ALIBI Witness 2.0 v3 is a free application (app) for Apple ios (requires ios 7.0 or later). This app is compatible with iphone,
More information1 - Introduction About this this manual Configuration SMS Functions Product Information System Requirements 2
Contents 1 - Introduction. 2 1.1 About this this manual... 2 1.2 Configuration 2 1.3 SMS Functions 2 1.4 Product Information 2 1.5 System Requirements 2 2 SMS Installation... 3 2.1 How to install 3 3 -
More informationCMS INSTALLATION AND USAGE GUIDE
CMS INSTALLATION AND USAGE GUIDE 1-1 CMS Installation System Requirement: * CPU: Intel Pentium 4 processor or higher. * OS: Microsoft Windows XP, Windows Vista, Windows 7, or Windows 2003 Server * RAM:
More informationVideo Surveillance Management Software NVClient V5 User Manual
Video Surveillance Management Software NVClient V5 User Manual Version: V5.0 Update Date: 2013-12-12 Welcome Thanks for using the Company's digital video surveillance management software. Please read this
More informationDiViS Net (Integration)
DiViS Net (Integration) Installation and User s Guide Ver 11.02.2 Digital Video Security System Digital Video Recorder www.divisdvr.com *All contents of this document may change without prior notice. CHANCE-i
More informationTRIDENT - CMS Plus. 64CH Central Management System Software
TRIDENT - CMS Plus 64CH Central Management System Software Please read instructions thoroughly before operation and retain it for future reference. For video demonstration about CMS Lite operation, please
More informationAVerMedia IWH3216 Touch Quick Installation Guide
AVerMedia IWH3216 Touch Quick Installation Guide NOTICE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY. WARNING TO REDUCE
More informationNetwork Video Recorder Software 2.2 User Manual. Table of Contents
Network Video Recorder Software 2.2 User Manual Table of Contents Chapter 1. Using NVR Software 2.2... 6 Chapter 1-1. System Settings... 6 Chapter 1-2. HDD Settings... 7 Chapter 1-3. Device Settings...
More informationE-Vista Digital Surveillance System 300 / 500 Series. User s Operation Manual Copyright By Shaoming Technology
E-Vista Digital Surveillance System 300 / 500 Series User s Operation Manual 2004 Copyright By Shaoming Technology 1 Contents Copyright Notice... Trademarks.. Special Notice...... Warning... Checking List..
More informationset for a fixed view. Install the PTZ camera and the stationary camera in close proximity of each other
CHAPTER 3 3.1 Object Tracking and Zooming Object Tracking provides you the real-time tracking and automatic magnification of a single moving object by the combination of one PTZ camera and one stationary
More informationMake sure that you have following items supplied with your DVR. If any of these items is missing or damaged, notify your vendor immediately.
1 1. Getting Started 1.1 Checking Supplied Items Make sure that you have following items supplied with your DVR. If any of these items is missing or damaged, notify your vendor immediately. Quick Manual
More informationBosch Video Management System. User Manual
Bosch Video Management System en User Manual Bosch Video Management System Table of contents en 3 Table of contents 1 Using the Help 5 1.1 Finding information 5 1.2 Printing the Help 6 2 Introduction
More informationIntelligent Security & Fire Ltd
Copyright 2007-2009 Cortex Global Table of contents: Introduction... 3 1. Login... 3 1.1 Advanced login options... 4 2. Preview... 5 2.1 Main menu... 6 2.2 Camera list... 6 2.3 Main display... 6 2.4 Maps...
More informationSecuGuard. Basic 5.0. User s manual. Dec Version: 5.0.x
SecuGuard Basic 5.0 User s manual Dec. 2009 Version: 5.0.x SecuGuard Basic System Requirement...5 Installation...6 Before Installing the Software... 6 Starting the Installation... 6 Quick Start...9 Install
More informationicms Pro USER s MANUAL Ver 1.0
icms Pro USER s MANUAL Ver 1.0 Contents Target Audience for this Document... 5 Copyright, Trademarks and Important Information... 5 Copyright... 5 Disclaimer... 5 Introduction... 6 Tabs... 6 Panes... 7
More informationVer HDxViewer. Manual
Ver. 13.09.06 HDxViewer Manual Symbols and Letters used in this Manual Importance mark : Arrangement of items to be considered for completing work Additional information or tip to avoid in order to completing
More informationIDIS Solution Suite. Video Wall Service. Software Manual. Powered by
Solution Suite Software Manual Video Wall Service Powered by Before reading this manual This Operation Manual provides instructions for using Solution Suite, a network integration solution enabling remote
More informationVIDOS-NVR. User Guide
VIDOS-NVR User Guide Copyright This user guide is the intellectual property of VCS and is protected by copyright. All rights reserved. No part of this document may be reproduced or transmitted for any
More information