I. Getting Started. 1.1 Structure

Transcription

1

2 I. Getting Started 1.1 Structure Laser light 2. Infrared Night Vision 3. PTT 4. Video Recording 5. Power 6. Voice Recording 7. Taking Camera/White Light Button

3 8. White Light 9. Speaker 10. Menu/Alarm 11. UP 12. DOWN 13. OK/Playback 14. Reset 15. Charging Port 16. Connect External Camera Port 17. Laser Light Button/Night Vision Button 18. USB/HDMI Port 19. Display Screen 1.2 Remote Control Key Note: The remote controller is 1 to 1 match the camera, if you buy more than 1 piece of the camera, the remote controllers maybe mixed. If this happens, you have to match them a pair first to use the remote controller, the way is: after start the camera, short press the power

4 button together while press the photo key on remote controller. You only need to do this when the first time you use them. 5. The Sign on LCD Screen 1 Date and Time 2 SD Card Storage 3 USER ID 4 Recording Time 5 Recording Resolution 6 Battery Status 6. Device Charging Low Battery Prompt: when battery is low, the battery icon in the upper right corner of the display will turn Red and the flashing " beeps "... The tone will automatically shut down after 10 seconds, please charge it in case of low battery, so as not to affect your use and damage to the battery. Two Optional Charging:

5 1 USB Charging Mode 2Docking Station 1Via USB,Charging the Camera Via USB Cable & Wall Charger, The status of the charging can be reflected from the icon on the LCD (on charging) and the status indicator (off charging), the LED indicator is red when charging, the charging indicator is off and the LED indicator is off. 2Via Single Docking Station,Put the Camera into the Docking Station, and pay attention to the contact and the direction of the charger. The status of the charging can be reflected from the icon on the LCD (on charging) and the status indicator (off charging), the LED indicator is red when charging, the charging indicator is off and the LED indicator is off. II> Basic Setting

6 1. Power ON In the shutdown state, short press on / off for 3 seconds,the camera Boot into the preview screen, LED indicator green. 2. Power OFF In the boot state, long press the "on / off" button for 3 seconds off, LCD off, all lights off. 3. Standby In the boot state, such as "automatic off screen" is turned on, without any operation boot automatically enter the screen saver mode, the screen is off, the LED indicator green. Tap any button to light the display. 4. System Setting Short press "menu" key, enter "setting mode", there are 3 setting modes: camera mode /Video Recording mode / system setting. After entering a certain mode interface, click "Up" / "Down" to select the item to be set, click "OK" to enter the menu to change the setting, click "Up" / " Down "to select the desired menu, short press" OK "again to save the setting and exit the menu bar to return to the system setting interface. The device automatically saves the setting changes.

7 1Resolution Setting: Click "OK" to pop up the check box, click "Up" or "Down" to select the desired resolution, and then click "OK" to confirm. 2DATE&Time Setting: Click "OK" to pop up the check box, click "Up" or "Down" to select the desired date and time, select it and click "OK" to confirm. 3Loop Recording: Click the "OK" button to pop up the check box, click the "Up" or "Down" button to select the desired video duration, select OK, then click "OK" button to confirm. (Video segments were: off, 3,5,10 minutes of choice, the system default 3 minutes, such as the option to turn off the default 15 minutes and do not loop video) 4Picture Resolution Setting: Click the "OK" button to pop up the check box, click "up" or "down" button

8 to select the desired resolution, select OK, then click "OK" button to confirm. 5 ID Setting: Click the "OK" button to pop up the check box, click the "UP" or "DOWN" button to select the desired ID number, select it, and then click the "OK" button to confirm. 5. Recording 5.1 Recording In the power-on state, press the "record" button in the preview screen to start recording. When the video is recorded, the LED in the upper left corner will be red and begin to flash slowly, and the green standby light will turn off. Click the "record" button again to stop recording, LED red light does not flash, LED green light is always on, the video file is automatically saved to the TF memory card, the screen automatically returns to the camera preview screen, and the video is named after the date and time, that MOV suffix, stored in the memory card. Please refer to the "View / Playback Videos" section for video review. 5.2 Snap Function In the process of recording, click the "camera" button take a picture and

9 automatically save, in the process will not interrupt the camera function. 6. Taking Camera In the power-on state, press the "camera" button under the preview screen to take a photo and automatically save it and return to the photo preview screen. During the photo-taking process, there is a sound like "click", one photo for each button, the photo is named after the date and time, JPG suffix, saved in the memory card. Please refer to the "View / Playback Videos" section for photos. 7. Recording Alone On the Power on Station, press "Record" button to start recording alone. When recording, the screen will display the recording mark, the LED indicator will blink green, tap "Record" button again to stop recording, LED will turn green, audio The file is automatically saved on the TF memory card and the screen automatically returns to the preview screen. 8. Other Function Mode 1 Infrared Night Vision : After switching on the default infrared night vision light is off, the filter switch for color film, suitable for daytime use. If it is used at night can press the "laser" button to open the infrared light, filter switch to switch to white, suitable for night use. Long press the "laser" button to switch between daytime working mode and night working mode. In the power-on state, press and hold the "Laser" button to turn on the IR mode. At this time, the IR LED turns red and the image appears black or white during the preview or image capture. Press and hold the "Laser" button again to turn off

10 the IR mode, The infrared light is turned off at this moment, the image in the preview picture or the photographing process resumes the color image. 2 Laser light function: Click the "laser light / night vision light" laser positioning light on / off, used to locate the shooting direction. 3 White light function: Long press "camera button / white light button" white light on / off, for the role of lighting. 4 Explosion warning function: Long press "Menu key / burst key" burst warning open / closed, used to play a warning role. 9. Delete File In this unit, can not be individually deleted on the memory card to save any audio and video files, can only be directly in the menu formatted TF card or choose to connect the computer inside the computer to delete the desired content. 10. Check/Playback Video In the boot state, under the preview Screen, Long press playback button to access playback menu. 1Under this display, tap "Up" or "Down" to select the desired option: Video /

11 Photo / Voice Recording. 2After selecting the previewed file type (video / photo / voice recording), press "OK" once to start playing, tap again to pause, long press to exit the preview interface. 11. Reset Setting If the device crashes or stops responding due to improper operation or other special reasons, you can press the reset button to reset the device. After reset, the device restarts and the device reboots to restore the previous settings. 12. Indicator light 1 In the boot state, the preview screen under the LED lights green, long bright; 2 In the boot state, camera mode LED indicator is red, slowly flashing;3 In the boot state, the recording mode, the green LED, slowly flashing; 4 When the data connection status, the LED indicator light green long; 5 When charging, the LED indicator is red, the LED indicator is off after the charging is completed; 6 At power-on, every time a picture is taken in preview mode, the LED flashes red once.

12 13. Connect Computer Directly connect to the computer, do not have to install any drivers, directly using the supplied data cable connected to the computer. 14. Remote Controller The camera has a remote version, you can take pictures and video remote control operation, convenient, more human Matching Code After the device is powered on, press and hold the video button for three seconds, then press the remote control to press the camera button, The host will take a picture after receiving the signal to indicate the completion of the code., Video and other operations Remote Control Button Operation Function: 1 :Taking Camera Button, Press one taking one pic; 2 :Video Recording Button, Click it,video Start recording,click again,it stop recording 3 :Voice Recording button: Press once to start recording and press again to stop recording III> Specifications

13 Split storage: Chipset: Ambarella A7LA50 Sensor: OV4689 Photo: 32M(7552X :9) (30M/23M/20M/18.5M/16M/4M) Video: 5min/10min/20min/30min Pre-Record: 20s-85s Delay-Record: 10s Size: 83mmx60mmx32mm Remote control: available Auto IR: menu available Vibration: available Display: 2.0 inch HD color display Speaker: available Storage: 16GB or 32GB option in a camera Battery life: 6-8hours Visual indicators: available Language: multiple languages PTT/Walkie-talkie: support, but needs to customize cable first from factory Night vision: up to 10 meters Stamp: ID+date+time Laser light: available White light: available Audio only record: support Docking station software: available Warranty: 1 year Battery MSDS: available External button lens: optional Battery capacity: 2000mAh Lens angle: 120 Drop resistant: 2 meters Port Waterproof: support USB, HDMI, AV in, PTT, dock port

14 IV> Packed accessories 1 USB Power Adapter X 1 5 Remote Controller X 1 2 USB Cable X 1 6 Docking Station X 1 3 Big Clipper X 1 7 Rechargeable Battery X 1 4 Small Clipper X 1 8 User Manual X 1 V> Trouble Handling! Equipment can not boot, no response to the operation 1. Please connect the charger to charge the device, check after charging 2 hours to solve the problem; 2. Please check the charger and the connection cable is normal; 3. Press the reset button to restore the device to factory settings, and then check whether to solve the problem; 4. If you still can not solve the problem, please contact the sales staff to return to factory maintenance.! Red Equipment Picture

15 The device uses relay control infrared filter lens. When it has been hit in the course of transportation or fall could lead to an infrared filter lens stuck, the magnetic force can not be reset after the relay is energized. At this time, please repeatedly pressing the infrared switch, recovery relay control infrared filter lens. If not, please shut down after the inverted device, to beat in a surface is relatively soft place (Arm of the chair, mouse pad etc.). Boot and check is normal, if not, please contact customer service staff to return the factory repair.! Device failed to connect computer, and the failure to enter upload mode Please contact customer service staff resolved.! Time can not be synchronized If it can not change the time, please contact customer service staff remote networking solution. VI> Note 1. The alarm flash light can only be turned off by long press under the work mode. If you are in setting mode, you have to exit it by long press Playback/OK button and come back to work mode first, and then can turn off the light.

16 2. You can review photos, videos and audios under work mode by long press the Playback/OK button to enter in, short press it to review, short press UP or DOWN to select and change among them. However, you have to connect the camera to computer/tablet first when you want to delete files, this is for safety reason. 3. When recording video, the screen will automatically shut down for battery saved, this is not black screen or dead. This is factory default setting, you could also cancel it in setting mode.

17 4. Pre-record, delay record, motion detection etc., you have to set first in respective mode to take effect, when you want to use. Accordingly, if you don t need, you should set to off first. 5. To avoid a loss of data stored in the body camera, we recommend transferring data to your computer/tablet for backup. 6. Charge the camera right away when the battery level is running low. Let the battery completely drain may damage it. 7. Don t put the camera into fire or water. VII> FAQ Q: What should I do when the camera crashes or gets stuck? A: The body camera has a special reset button on the left top corner. If the camera was crashed suddenly, press the button to reset it. The body worn camera then shut down. And if you press power, it will start again normally. Q: Can pictures zoom in or out when taking photos?

18 A: Yes, you can long press up/down button to zoom in or out. Whenever your hands feel the body vibration, the screen will zoom in / out by one one size. Q: Is this camera waterproof? Can I use it underwater? A: It is waterproof IP54, can t be used underwater but can be used in snowy and rainy days for outdoor work. Q: Can this camera's memory card be taken out? Can I fix a larger memory card in it? A: Sorry, the memory card is built-in, can not be removed or fixed by yourself.