Qualified Partner Programme QPP. Installation Practice Felice Guarna Wetzikon, July 2001
|
|
- Patrick Eaton
- 5 years ago
- Views:
Transcription
1 Qualified Partner Programme QPP Installation Practice Felice Guarna Wetzikon,
2 Why installation quality Product performance must be preserved by an accurate installation Long term warranty requires design integrity to assure performance during the whole operational life of the cabling. Standards cover installation practice. New cabling categories have performance very close to limit of the hardware; margin for errors do not exist anymore. Installation Practice / Page 2
3 EN It is recognised that the cabling Installer, operating a quality assurance system in accordance with EN/ISO 9000 series has a common approach to all installation projects Compliance with ISO 9000 is not required but suggested Consistent approach to cabling is the way to assure quality to customer Quality is the signature of the installer and manufacturer Quality comes from a structured and ordered approach to the work Installation Practice / Page 3
4 EN/ISO 9000 PLAN EXECUTE Quality means continuous improvement process Improvement is achieved with learning IMPROVE LEARN VERIFY Learning is changing as result of experience Experience is the way of capitalizing on errors Installation Practice / Page 4
5 The approach PLAN EXECUTE VERIFY SPECIFY REALIZE TEST Cabling installation is part of whole IT project IT project will specify cabling requirements Installation must be regulated by its specification Specifications should cover from planning to test Installation Practice / Page 5
6 Installation specification Agreed between customer, designer and installer Subset of I.T. project specification Covering all aspects of cabling Installers job from planning to consignment including contractual aspect and possibly maintenance. Installation Practice / Page 6
7 Planning Understand the PURPOSE Know all elements Outline working plan Verify it on site Document Installation Practice / Page 7
8 Logistic Parts procurement Receiving inspection Storing with relative operations Move to working area Installation Practice / Page 8
9 Safety Safety and legal have priority Safety is your and your people protection Safety precautions are not signs only Safety has people as subject to prevent them becoming victims Installation Practice / Page 9
10 Safety site premises Four categories of exposures are present during the installation: Mechanical Chemical Electrical Fire These exposures are related to the premises as well as cabling Installation Practice / Page 10
11 Safety cabling components R&M cabling components are SAFE, as material and performance LS0H Comply with most stringent European and American norms To be used for the specific purpose of cabling UL/CSA Installation Practice / Page 11
12 Safety electrical Protective earthing, grounding and bonding Analysis of the building Protective earthing evaluation Measurements and physical verification Bonding structure decision Based on protective earth evaluation decide which bonding structure to adopt for cabling design Installation Practice / Page 12
13 Safety optical Two main cause of exposures: Laser light Usage of protected components Installer practice Mechanical Skin abrasion/intrusion Usage of chemical Proper disposal of consumable/debris Installation Practice / Page 13
14 Quality assurance Certification All activities to guarantee that customers objective is met Involve components, building, people, contract, job, tools. Establish criteria for consignment Installation Practice / Page 14
15 Administration Continuous changes and relocations require perfect knowledge of network users Manual or automatic generation of network plans are the must for the IT administrator Methodology and naming convention to be consistent with customer building identification All cabling elements to be identified/located Installation Practice / Page 15
16 Testing Testing section to cover purpose, subject of testing, methodology and tools Inspection criteria definition Link certification, channel certification, limits to be synchronized with IT installation test and cabling producer Corrective action to be planned Installation Practice / Page 16
17 Maintenance Preventive maintenance Reactive maintenance Cabling components do not require maintenance To be covered as per customer request Installation Practice / Page 17
18 Installation practice Logistic Order Transport Store Execute Pull Terminate Consign Document Label Record cable route Attach test result Quality Inspect Test Installation Practice / Page 18
19 Installation During transportation do not expose cabling material to pressure, strokes, environmental agents which visibly give damage to packing Store in dry place, indoor and with original packing. Should this be removed, do not expose to sunlight. Bringing material from cold to hot place, maintain packing material and allow temperature to set and eventually moisture to dry-out. Installation Practice / Page 19
20 Installation Cable can be installed only once! Horizontal cable must be used only indoor. In dry room and away from corrosive chemicals. Horizontal cable is not supposed to be exposed to rodent animals. Installation temperature 0 C to 50 C Operating temperature -20 C to +60 C Installation Practice / Page 20
21 Installation Horizontal cable is not intended for carrying electrical power or sustain mechanical loads. Horizontal cable is supposed to maintain jacket as much as possible Horizontal cable is intended to be used according to specifications and applicable standards Installation Practice / Page 21
22 Installation Cable is not supposed to be pulled but to be laid down! However Cable pulling by: hand Pull continuously with same force Never exceed max. pulling force Do not kink Installation Practice / Page 22
23 Installation Cable pulling by: knot Never exceed Max pulling force (see data sheet or catalogue) Pull slowly, continuously and with same force Do not kink After pulling remove 1 m before knot 1 meter Installation Practice / Page 23
24 Installation Cable pulling by: tool Pull continuously with same force Never exceed max. pulling force (better using fused rods) Do not kink Force spread on large area Installation Practice / Page 24
25 Installation Backbone cables: Multipairs/ four pair Fibre optic Not pulled but possibly lowered Fixed at least every floor by straps or positive fastening Allow weight relief loop at every other floor Never install in elevator rooms or too close to power installation Never fill conduit for more than 70% Maintain fire barrier at each floor Installation Practice / Page 25
26 Installation Cable preparation Pull cable outside the wall or panel for a length of cm Remove jacket for 10 cm by using cable stripper and caution not to damage insulation 40 mm 15 mm Cat.. 6 proposal to reduce by 50% Installation Practice / Page 26
27 Installation Cable preparation Prepare pairs in the sequence indicated on the module Trim pairs for a length not exceeding 40 mm: Leaving maylar tape and drain wire for FTP cable Removing all for other cables Be careful not to untwist and keeping coloured wire together with its white pair. 40 mm 15 mm Cat.. 6 proposal to reduce by 50% Installation Practice / Page 27
28 Installation Module termination is the operation that if completed in a wrong way destroys most of the electrical characteristic of the link R&Mfreenet jack has been design to facilitate the operation and to give as less opportunities for error as possible Before proceeding to copper cable termination, you must identify carefully the elements of the cable mainly on the screened ones: The foil and its conductive side The drain wire that is running along and in contact with the conductive side of the foil The braid in case of S-FTP or S-STP Installation Practice / Page 28
29 Installation Conductive part of foil is silver coloured, insulated is red or blue Mylar tape is of insulated material Drain wire runs between conductive part of foil and maylar tape R&Mfreenet jack bayonet must be inserted between drain wire and conductive part of foil (FTP) or between foil and braid (other screened cables) Installation Practice / Page 29
30 Mounting connection module 4xRJ45u/s 568 B A p p2 p p3 p4 p 1 p2 p3 1 1 Pin assignment Colour Code: 568 A Pin 1: green / white Pin 2: green Pin 3: orange / white Pin 6: orange Pin 5: blue / white Pin 4: blue Pin 7: brown / white Pin 8: brown Installation Practice / Page 30
31 Installation QUALITY Inspect What Criteria Test Link Certification Installation Practice / Page 31
32 Inspection What? the cable route for proper workmanship cable laying and pulling cable fixing and bending damaged caused at site property during cable pulling/fixing restoring fire barrier and safety/security installations cable complete and correct labelling Installation Practice / Page 32
33 Inspection Criteria Sample check of 5% all terminations on panel side Sample check of 5% of all terminations on the Terminal Outlet side If error is found, increase sample to 10% If additional errors are found during second pass check, then inspect 100% Installation Practice / Page 33
34 Inspection Criteria Check cable jacket removal < 40 mm for Cat 5e and < 20 mm for Cat 6 Check pair untwisting < 13 mm for Cat 5e and Cat 6 Cable bending radius < 8 times cable diameter Cable fastening (connector, panel, cable bundle) not too tight (cable should still move after fastening) FILL UP CHECK LIST!!!!!! Installation Practice / Page 34
35 Fastening cable to connector Fastening cable: Do not tighten too much to deform cable. Strap should be free to rotate with minimum force applied Strap lock to be placed underneath the connector cable plate (not as shown in the picture) Strap Strap lock Installation Practice / Page 35
36 Fastening cable to panel Fastening cable to panel: Do not tighten too much to deform cable. Strap should be free to rotate with minimum force applied Strap lock to be placed underneath the connector cable plate ( as shown in the picture). To do this, first lock the strap, then cut excess length, last rotate 180 with minimum force the strap. Installation Practice / Page 36
37 Fastening cable, bundling the cables Bundling Fastening and bundling: Do not tighten too much to deform cables. Strap should be free to rotate with minimum force applied Note large bending radius Fastening to Rack Installation Practice / Page 37
38 Inspection What? the cable termination for manufacturing instruction cable management inside the rack and outlet complete identification and labelling grounding as per design instructions and manufacturers recommendations Installation Practice / Page 38
39 Installation Labelling Labelling means identify by means of a naming convention all elements of the cabling. Naming convention may varies depending on: Customer special requirements Local rules Building planner So far only EIA/TIA regulated, ISO in process to include Identification must be positive, unique, containing to/from information Installation Practice / Page 39
40 Installation What to identify Pathways Backbone conduit Conduit Cable tray Handhole Maintenance hole Spaces Entrance facility Equipment room Service entrance Telecom. closet Work area Cables Horizontal cable Backbone cable Fibre cable Terminations Crossconnect Splice Jack Consolidation Transition Grounding Bonding conductor Grounding BusBar Telecom. grdn BusBar Telecom. main GBB Installation Practice / Page 40
41 Claim and problem reporting procedure Should any problem arise that need R&M attention, CLAIM FORM must be filled and sent to R&M Customer Support Warranty Claims must be mandatorily communicated through CLAIM FORM CLAIM FORM must be filled in any part Parts must be identified by Part Number and Lot code Installation Practice / Page 41
42 Cable Identification Part Number Picture shows: R35257 = Part Number Batch no /1 = production date and production lot number Both are blue ink printed Batch Installation Practice / Page 42
43 Patch Cord Identification Product Code (Part Number) Picture shows: = Product code (product Part Number) Not required Batch no = Patch cable production identification Both are blue ink printed Batch no. Installation Practice / Page 43
44 Patch Cord Identification Mfg no. Picture shows: = Mfg number (Manufacturing number) Required This number identify patch cord assembly and testing and is blank ink marked Installation Practice / Page 44
45 Connector Identification Picture shows a connection module with red arrow pointing to: Product batch identification number Batch id. number Installation Practice / Page 45
NZQA registered unit standard version 2 Page 1 of 7. Demonstrate basic knowledge of electronic security data protocols and cabling
Page 1 of 7 Title Demonstrate basic knowledge of electronic security data protocols and cabling Level 3 Credits 15 Purpose This unit standard is for electronic security installers engaged in the installation
More informationTarleton State University. Specifications
Tarleton State University Campus Communication Infrastructure Specifications Cabling Standards Summary This document identifies Tarleton State University communication infrastructure standards. The communication
More information3M Indoor Building Entrance Terminal (IBET) 4790V and 4790VL Series
3M Indoor Building Entrance Terminal (IBET) 4790V and 4790VL Series with 3M Quick Connect System (QCS) 2811 Dry Flame-Retardant Block and RJ-11 Test Ports Instructions Underwriters Laboratories (UL 348X)
More informationCopper Riser And Intrabuilding Cabling
Copper Riser And Intrabuilding Cabling PART 1: GENERAL The Contractor is held responsible to be familiar with the provisions contained herein and with other Sections of this Specification as applicable
More information3M Indoor Protected Building Entrance Terminal 4588V-QCS Series
3M Indoor Protected Building Entrance Terminal 4588V-QCS Series with 3M Quick Connect System 2811 Dry Flame Retardant Block Instructions Underwriters Laboratories (UL 348X) Listed April 2010 3 78-0013-1813-4-A
More informationGovernment of Prince Edward Island Structured Cabling Standards August 24, 2009
Government of Prince Edward Island Structured Cabling Standards August 24, 2009 Emerging technologies dictate that it is no longer allowable to simply integrate various manufacturers components into a
More information3M Indoor Protected Building Entrance Terminal 4788V-QCS Series
The Network of Networks. 3M Indoor Protected Building Entrance Terminal 4788V-QCS Series with 3M Quick Connect System (QCS) 2811 Dry Flame Retardant Block for Field-Terminated Building Cables Instructions
More informationThe six major components of a structured wiring system are:
OBJECTIVES 1. Describe various ANSI/TIA/EIA standards for commercial buildings and residential settings. 2. Discuss the specific Technical Systems Bulletins that can affect telecommunications installations.
More informationLANmark Snap-In Toolless connector. screened, with rear cover CAT7 GG45 INSTALLATION GUIDE
LANmark Snap-In Toolless connector screened, with rear cover CAT7 GG45 INSTALLATION GUIDE LANmark Snap-In Toolless Connector - Screened (with rear cover) CAT7 GG45 Document information Document reference
More informationNZQA unit standard version 3 Page 1 of 5. Demonstrate knowledge for telecommunications premises network cablers
Page 1 of 5 Title Demonstrate knowledge for telecommunications premises network cablers Level 2 Credits 2 Purpose This unit standard is for people installing and maintaining telecommunications cables on
More informationSYSTIMAX 360 PATCHMAX Modular Panel Instructions
Issue 1, February 2015 SYSTIMAX 360 PATCHMAX Modular Panel Instructions General The SYSTIMAX 360 PATCHMAX modular panel can be used for both EIA-T568A or EIA-T568B wiring applications and is an approved
More informationBreezeMAX Wi² and BreezeACCESS Wi² Quick Installation Guide
This Quick Installation Guide is intended for experienced installers. For more information refer to the relevant sections in the BreezeMAX Wi² and BreezeACCESS Wi² System Manual. Wi² Package Content Check
More informationSECTION COMMON WORK RESULTS FOR COMMUNICATIONS
PART 1 - GENERAL SECTION 270500 - COMMON WORK RESULTS FOR COMMUNICATIONS 1.1 RELATED SECTIONS A. All division 27 work shall, in addition to all division 1 specification sections, comply with all of the
More informationSYSTIMAX GS3 and 1100GS6 Evolve Modular Panel Instructions
860509967 Issue 6, May 2014 SYSTIMAX 360 1100GS3 and 1100GS6 Evolve Modular Panel Instructions General The SYSTIMAX 360 1100GS3 (Cat6) and 1100GS6 (Cat6A) Evolve modular panels exceed ISO and TIA Performance
More informationSYSTIMAX GigaSPEED Xpress Solution Design Guidelines
Design Guidelines Issue 2 August 2010 Contents 1.0 Overview 3 2.0 Power Separation 4 3.0 Bonding and Grounding 4 4.0 Administration and Labeling 5 5.0 General Cable Guidelines 5 6.0 Bundling and Alien
More informationCOMMON WORK RESULTS FOR COMMUNICATIONS
SECTION 270500 - COMMON WORK RESULTS FOR COMMUNICATIONS PART 1 - GENERAL 1.1 RELATED SECTIONS A. All division 27 work shall, in addition to all division 1 specification sections, comply with all of the
More informationOffice of the Chief Information Officer Technical Note: IT-960-TN14 Effective: 05/25/2006 Last Revised: 02/17/2012 Issuing Office: OCIO
Cabling Standards Office of the Chief Information Officer Technical Note: IT-960-TN14 Effective: 05/25/2006 Last Revised: 02/17/2012 Issuing Office: OCIO 1. Purpose CABLING STANDARDS This technical note
More informationAT&T Dedicated Internet (ADI formerly known as MIS) and Private Network Transport (PNT)
AT&T Dedicated Internet (ADI formerly known as MIS) and Private Network Transport (PNT) Site Preparation Guide 2015 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T
More informationModel 2460-KIT. Screw Terminal Connector Kit. Description / September 2014 *P * 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Model 2460-KIT Screw Terminal Connector Kit Description The Model 2460-KIT Screw Terminal Connector Kit
More informationSTR-3 STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER. Mounting and operating instructions
STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE 4 TECHNICAL DATA
More informationIndoor Protected Entrance Terminal 4588 Series
Indoor Protected Entrance Terminal 4588 Series Instructions Underwriters Laboratories (UL) Listed September 2003 78-8135-1209-8-A 1.0 General The 3M Indoor Protected Entrance Terminal (PET) 4588 Series
More informationANSI/TIA/EIA-568-B Cabling Standard
83 Pair Numbers and Color Coding The conductors in a UTP cable are twisted in pairs and color coded so that each pair of wires can be easily identified and quickly terminated to the appropriate pin on
More informationSPECIFICATION STANDARD COPPER RISER AND INTRABUILDING CABLING
PART 1: GENERAL 1.01 SCOPE OF WORK A. The Designer and Contractor are responsible to be familiar with the provisions contained herein and with other Sections of this Specification as applicable to the
More informationFog machine PT Users Manual
Fog machine PT-1500 Users Manual Table of content 1. Safety instructions... 3 1.1. For safe and efficient operation... 3 2. Intended use of the device... 4 2.1. Overhead installation... 5 2.2. Electrical
More informationUSB Raven Port USB 3.1, 100m CAT 6a/7 Point-to-Point Extender System User Guide
USB 3-2-1 Raven 3104 4-Port USB 3.1, 100m CAT 6a/7 Point-to-Point Extender System User Guide Thank you for purchasing the USB 3-2-1 Raven 3104. Please read this guide thoroughly. This document applies
More informationAT&T Switched Ethernet Service SM
Site Preparation Guide AT&T Switched Ethernet Service SM December 2016 2016 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo, Mobilizing Your World and DIRECTV are registered trademarks
More informationThe power behind competitiveness. Delta Infrasuite Power Management. Power Distribution Unit. User Manual.
The power behind competitiveness Delta Infrasuite Power Management Power Distribution Unit User Manual www.deltapowersolutions.com Save This Manual This manual contains important instructions and warnings
More information1 Channel Strobe Controller ORDERCODE 40226
1 Channel Strobe Controller ORDERCODE 40226 Congratulations! You have bought a great, innovative product from Showtec. The Showtec Strobe Controller brings excitement to any venue. Whether you want simple
More informationInsuLogix T Fiber Optic Probes and Extensions Installation Guide
InsuLogix T Fiber Optic Probes and Extensions Installation Guide Weidmann Technologies Deutschland GmbH Washingtonstraße 16/16a D-01139 Dresden, Germany Telefon: +49 (0)351 8435990 Version 1.2 InsuLogix
More informationAT&T Dedicated Internet (ADI formerly known as MIS) and Private Network Transport (PNT)
AT&T Dedicated Internet (ADI formerly known as MIS) and Private Network Transport (PNT) Site Preparation Guide This guide is designed to assist local on-site contacts to understand what you will need to
More informationSPEC SHEET. Multimode Patch Cords and Pigtails. Cable types. Description. Features. Fiber types
Multimode Patch Cords and Pigtails SPEC SHEET Description ADC KRONE offers a wide array of multimode fibre optic patch cords featuring Riser and LSZH cables in various diameters. ADC KRONE s multimode
More informationCONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
More informationCabling Solutions Data Center & Local Area Networks
Cabling Solutions Data Center & Local Area Networks R&M About us. «R&M is a leading provider of cabling solutions for high quality communication networks.» R&M (Reichle & De-Massari AG) has developed and
More information2 Mesa Ethernet Dock User s Manual
owner s manual Mesa Ethernet Dock The Mesa Ethernet Dock is an optional accessory that provides an ethernet port for networking, power input jack, USB client port, and a mounting station for the Mesa Rugged
More informationQualified Partner Programme QPP. Voice Integration Felice Guarna
Qualified Partner Programme QPP Voice Integration Felice Guarna Easiest voice integration - with "R&Mfreenet" The worlds of voice and data transmission are increasingly growing together. Modern private
More information3M Indoor Protected Building Entrance Terminal (IBET) 4688V Series
3M Indoor Protected Building Entrance Terminal (IBET) 4688V Series Instructions Underwriters Laboratories (UL 348X) Listed February 2017 78-0013-6127-4-B 2 February 2017 78-0013-6127-4-B 1.0 General The
More informationTelecommunications Structured Cabling Systems
Section 18 Telecommunications Structured Cabling Systems 18.1.0 Introduction 18.1.1 Important Codes and Standards 18.1.2 Comparison of ANSI/TIA/EIA, ISO/IEC, and CENELEC Cabling Standards 18.2.0 Major
More informationUSB 3.1 CAT6A/7 EXTENDER
USER MANUAL ICU504A USB 3.1 CAT6A/7 EXTENDER 24/7 AT OR VISIT BLACKBOX.COM Power Mode Config Status Link Video USB 2 USB 3 Power Mode Config Status Link Video USB 2 USB 3 TABLE OF CONTENTS PRODUCT OPERATION
More informationOMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE
OMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE The Omega MPP enclosure is based on a 19" frame, with 4 empty module slots for MPP modules. Highly flexible : any mix between twisted pair and optical fiber modules.
More informationTIA/EIA 568A Sub-system HORIZONTAL CABLING
TIA/EIA 568A Sub-system HORIZONTAL CABLING Horizontal Cabling WA 100(120)Ω CAT 3 TP TP 100(120)Ω CAT 5 150Ω STP-A 62.5(50)/125µ FIBER HC/FD WA Horizontal Media Considerations UTP/FTP Consider bandwidth,
More informationThe University of Texas at Austin July 30, 2014 SECTION COMMUNICATIONS TERMINATION BLOCKS AND PATCH PANELS
SECTION 27 11 19 COMMUNICATIONS TERMINATION BLOCKS AND PATCH PANELS PART 1 - GENERAL 1.1 SUMMARY A. This section specifies the products and installation of communications termination blocks and patch panels
More informationNZQA unit standard version 2 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of installation practices and procedures for telecommunications network equipment Level 3 Credits 10 Purpose This unit standard covers the installation of basic
More informationMICHIGAN DEPARTMENT OF TRANSPORTATION
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR GROUNDING, BONDING, LIGHTNING PROTECTION AND SURGE PROTECTION FOR INTELLIGENT TRANSPORTATION SYSTEM EQUIPMENT ITS:CLC 1 of 5 APPR:LWB:DBP:07-31-13
More informationInstallation manual plugs and connectors with screw connection (16/32 A)
EN Installation manual plugs and connectors with screw connection (16/32 60003213 Issue 04.2016 2016-04-01 Table of contents 1 About this manual 3 1.1 Structure of the warnings 3 1.2 Symbols used 4 1.3
More informationKM-4800w. Installation Guide
KM-4800w Installation Guide TABLE OF CONTENTS page 1 Installation Requirements 2 2 Unpacking 3 2. 1 Unpacking 3 2. 2 Confirmation of Accessories 5 3 Leveling the Machine 7 4 Setup of the Roll Deck 9 5
More informationCopper Cabling Standards
Copper Cabling Standards White paper White Paper Copper Cabling Standards v2.0 EN 1 Introduction Standard specifications are the foundation upon which most cabling and networking projects are built. Professionals
More informationInstallation Job Aid for Ethernet Routing Switch 3600 Series
Installation Job Aid for Ethernet Routing Switch 3600 Series Notices NN47213-303 Issue 03.01 November 2017 Notice paragraphs alert you about issues that require your attention. Following are descriptions
More informationMASTERLINE Ultimate Hybrid High Voltage 4/12 (MLUH HV 4/12) blunt cut at BTS side
INSTALLATION MANUAL HUBER+SUHNER AG Fiber Optics MASTERLINE Ultimate Hybrid High Voltage 4/12 (MLU HV 4/12) blunt cut at BTS side DOC-0000803885 Rev A June 18, 2018 Page 1 of 12 (MLUH HV 4/12) blunt cut
More informationInstallation Job Aid for Ethernet Routing Switch 5900 Series
Installation Job Aid for Ethernet Routing Switch 5900 Series Notices NN47211-301 Issue 05.01 November 2017 Notice paragraphs alert you about issues that require your attention. The following paragraphs
More informationD-Pack 6 Classic ORDERCODE 50315
D-Pack 6 Classic ORDERCODE 50315 Congratulations! You have bought a great, innovative product from Showtec. The Showtec D-Pack 6 Classic brings excitement to any venue. Whether you want simple plug-&-play
More informationSECTION COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING
SECTION 27 13 23 COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary to perform and complete
More informationPANGEN INDUSTRIAL AUTOMATION SYSTEM WARRANTY
PANGEN INDUSTRIAL AUTOMATION SYSTEM WARRANTY WARRANTY GUIDE PANGEN INDUSTRIAL AUTOMATION SYSTEM WARRANTY WARRANTY GUIDE PROGRAM OUTLINE TABLE OF CONTENTS: MATERIALS PAGE # Program Outline 2 Table of Contents
More informationAppendix 1 to the R&Mfreenet Warranty Program
Appendix 1 to the R&Mfreenet Warranty Program 1 R&M Certification Process The R&Mfreenet certification process is three pillars: a) Adherence to applicable standards, both for products and installations;
More informationADJUSTABLE FLOOR BOXES
ADJUSTABLE FLOOR BOXES TABLE OF CONTENTS Description Applications References Configuration type Installation Technical Data Mechanism compatibility Dimensions Description Floor housings for electrical
More informationLos Angeles Community College District Design Standards
LACCD Facilities Design Standards - Structural Cabling and Telecommunications Room Facilities Ver Approved: DTC February 0, 0 LACCD has developed the following Districtwide standard for IT infrastructure
More informationFTP1 Single Channel LED DMX Driver
FTP1 Single Channel LED DMX Driver User Manual FTP1 LOAD ANALOG Order code: FLEX29 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before
More informationPORTABLE VETERINARY X-RAY EQUIPMENT INSTRUCTION MANUAL
HF80/15+DLP PORTABLE VETERINARY X-RAY EQUIPMENT INSTRUCTION MANUAL Version 1.0 CONTENTS PAGE NO. NOTICE FOR SAFE OPERATION 2 INTRODUCTION... 3 NOTES TO USERS. 3 COMPONENTS.. 4 OPERATING CONDITIONS. 5 MAIN
More informationFlexoled FTP3HP RGB LED DMX Driver
Flexoled FTP3HP RGB LED DMX Driver User Manual + 12-24V DMX INPUT DMX OUTPUT DC IN (12A MAX) DMX ADDRESS & DIMMER SETTINGS SWITCH 10 11 12 DMX MODE DIMMING MODE BUILT-IN MODE LOAD 4A PER CHANNEL (12A MAX)
More informationSymbols Glossary Rev. 1 1 / 16
5.4.3 Consult instructions for use Indicates the need for the user to consult the instructions for use. 1641 electronic Table D.1 11 IEC 60601-2-18 electronic equipment Part 2-18: Particular the performance
More informationSUBCON 15 HD (High-density) D-Subminiature Connectors
SUBCON 15 HD (High-density) D-Subminiature Connectors Installation Instructions 1896_en_D SUBCON SUBCON 15 15 HD HD 1 5 6 10 11 15 15-position High-density D-subminiature Plug 5604602 SUBCON SUBCON 15
More informationCERTIFICATION PLUS SM
CERTIFICATION PLUS SM SYSTEM WARRANTY PROGRAM Panduit Warranty Guide PROGRAM OUTLINE TABLE OF CONTENTS: MATERIALS PAGE # Program Outline 2 Table of Contents Warranty Information 3 Introduction & Installation
More informationNext Generation Firewall
Next Generation Firewall Hardware Guide Models 110, 115 Revision A Contents Introduction on page 2 Find product documentation on page 2 Model N110 features on page 3 Model N115 features on page 5 Precautions
More informationALTAI C1N SUPER WIFI CPE INSTALLATION GUIDE. Version 1.0 Date: September, Altai Technologies Ltd. All rights reserved
ALTAI C1N SUPER WIFI CPE INSTALLATION GUIDE Version 1.0 Date: September, 2013 Copyright 2007 Altai Technologies Limited ALL RIGHTS RESERVED. Altai Technologies Limited Unit 209, 2/F, East Wing, Building
More informationPANGEN SYSTEM WARRANTY. Warranty Guide
PANGEN SYSTEM WARRANTY Warranty Guide C2-10270 PANGEN SYSTEMWARRANTY GUIDE PROGRAM OUTLINE TABLE OF CONTENTS: MATERIALS PAGE # Program Outline 2 Table of Contents Warranty Information 3 Introduction &
More informationANSI/TIA-568-C Cat 6A Field Test Specifications
This document has been prepared to aid consultants or engineers in developing contractual specifications covering the certification of Category 6A Permanent Links. It is offered as a general guide. Suitability
More informationBonding and grounding NETCONNECT copper cabling systems
White paper Bonding and grounding NETCONNECT copper cabling systems A complete review of bonding and grounding for copper twisted-pair cabling systems www.commscope.com 1 Taking the guesswork out of grounding
More informationFiber Management Tray (FMT) User Manual
Fiber Management Tray (FMT) User Manual Fiber Management Tray Content Page INTRODUCTION............................................................................. 2 ADMONISHMENTS...........................................................................
More informationEnphase S-Series Microinverter and Engage Cable Safety
SAFETY Enphase S-Series Microinverter and Engage Cable Safety Important Safety Information (S280-60-LL and S230-60-LL) This document contains important instructions to use during installation of the Enphase
More informationONE SD-LAN Wall Mount Splitter Housing (1LAN-SPLT C)
CMA-477-AEN 1 General Figure 1 STANDARD RECOMMENDED PROCEDURE 000-000-AEN ISSUE 1 MARCH 2018 I Page 1 2 Carton Contents Installation instruction Wall Mount Splitter housing Cable installation hardware
More informationINDUSTRIAL TRAY CABLE PRODUCTS
Overview OCC s new product line for Power and Control Tray Cable for industrial applications offers a robust and dependable product with enhanced mechanical and environmental performance features. The
More informationComputer Network Design Guide Existing Systems 1 / 6
COMPUTER NETWORK DESIGN GUIDELINE FOR EXISTING SYSTEMS DOCUMENT NUMBER: 16765 APPLICATION: ELEMENTARY, MIDDLE AND HIGH SCHOOL DATE OF ISSUE: 11-27-06 - First Issued NOTES: The attached guideline should
More informationAppendix D. EMC Installation Guidelines. Safety Considerations. Ferrite Absorbers and P-Clips. General Product Philosophy
Appendix D EMC Installation Guidelines General Product Philosophy The ZETA6xxx was not designed originally for EMC compliance. Therefore, it will require specific measures to be taken during installation.
More informationRTT2 ROOM TEMPERATURE SWITCH. Mounting and operating instructions
Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS PRODUCT DESCRIPTION ARTICLE CODES INTENDED AREA OF USE TECHNICAL DATA STANDARDS OPERATIONAL DIAGRAMS WIRING AND CONNECTIONS
More informationLED Slimline PAR RGBW 7x8W
VIS0495.3 LED Slimline PAR RGBW 7x8W User Manual KEEP THIS MANUAL FOR FURTHER NEEDS Key Features: 7 x RGBW QUAD 8W LED IP65 Weatherproof Die-Cast Housing Slimline, Compact & Stylish Design 45 Beam Angle
More informationBrooks Models MT3809G Metal Tube Variable Area Flowmeters HART Handheld DD Installation & Operation Manual
Installation and Operation Manual Supplement Brooks Models MT3809G Metal Tube Variable Area Flowmeters HART Handheld DD Installation & Operation Manual Installation and Operation Manual Supplement Essential
More informationSECTION TELECOMMUNICATIONS TESTING AND DOCUMENTATION
SECTION 17045 TELECOMMUNICATIONS TESTING AND DOCUMENTATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including Facilities Management Design and Construction
More informationANSI/TIA-568-C Cat 6 Field Test Specifications
This document has been prepared to aid consultants or engineers in developing contractual specifications covering the certification of Category 6 Permanent Links. It is offered as a general guide. Suitability
More informationSAVE THESE INSTRUCTIONS
OUTDOOR HARDWIRE INSTALLATION INSTRUCTIONS Please read and save these instructions. Read carefully before using product. Protect yourself and others by observing all safety information, warnings and cautions.
More informationCat.8 Shielded Field Termination Plug Description
Description RiT s CAT8 Shielded field termination plug are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations.
More informationPeter Sharp RCDD IBI Group
Peter Sharp RCDD IBI Group Who am I? Presenter Credentials Electrical Engineering Consultant Specialties in communications, electronics and computer sciences, In practice for more than 40 years Member
More informationCLS Atmosphere LED-panel
INDEX Index 2 Introduction Included items Optional accessories Safety information 4 Installation REVO Colour Flow 5 LDC connectioncable for the REVO Colour Flow 6 Assemble a REVO Colour Flow connectioncable
More informationDescription and Assembly Instructions
Description and Assembly Instructions Modular Industrial Patch Panel Release 01 12/11 Technical Support HAC.Support@Belden.com The naming of copyrighted trademarks in this manual, even when not specially
More informationLASERMET SLIMJIM LED SIGN INSTRUCTION MANUAL LEDS-SJ XXX
LASERMET SLIMJIM LED SIGN INSTRUCTION MANUAL LEDS-SJ 00843-00-XXX 00843-53-000 Page 1 of 11 Issue 3 2 January 2013 Lasermet SlimJim Illuminated Sign Instruction Manual Contents Introduction... 4 Installation...
More informationSPI PowerNet requirements for the non-contestable Interface Works at Deer Park Terminal Station
SPI PowerNet requirements for the non-contestable Interface Works at Deer Park Terminal Station SPI PowerNet Reference: ZD23 Version: 1.1 Issue date: 15 May 2014 Contents 1 Scope... 3 2 Deer Park Terminal
More informationOperating instructions. Speed monitor D / / 2014
Operating instructions Speed monitor D200 80005257 / 00 05 / 2014 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5 2.2 Target group...5
More informationA. System design shall be completed by a Registered Communications Distribution Designer (RCDD).
UDIVISION 27 COMMUNICATIONS 27 00 00 COMMUNICATIONS A. System design shall be completed by a Registered Communications Distribution Designer (RCDD). B. Comply with American National Standards Institute
More informationOperating instructions. Switching amplifier DN0210 DN / / 2015
Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5
More informationRack Installation Instructions
Rack Installation Instructions For System Storage EXP2512 and EXP2524 Express Storage Enclosures Use the instructions in this document to install an IBM System Storage EXP2512 Express Storage Enclosure
More informationPCS88-90 (Black) PCS88-94 (Silver)
USER MANUAL MODELS: PCS88-90 (Black) PCS88-94 (Silver) Pop-up Table Connection Bus Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Recycling Products 2 3 Overview
More informationModel No. ET-JPF200BE
Operating Instructions Floor Stand Kit Commercial Use Model No. ET-JPF200BE ET-JPF200WE ENGLISH FRANÇAIS ESPAÑOL DEUTSCH ITALIANO * The above illustration is of this product mounted to an optional projector.
More informationEC Series. Safety Guide
EC Series Safety Guide R5906018/02 01/07/2017 Barco Inc, Image Processing 3078 Prospect Park Drive, Rancho Cordova, CA, 95670, USA Phone: +1 916 859-2500 Fax: +1 916 859-2515 Support: www.barco.com/en/support
More informationGreat Western Painting Assured Equipment Grounding Conductor Program OR Ground Fault Circuit Interrupter (GFCI)
Assured Equipment Grounding Conductor Program OR Ground Fault Circuit Interrupter (GFCI) GROUND FAULT CIRCUIT INTERRUPTERS Wiring design and protection. - 1926.404 Our company uses ground fault circuit
More informationHUBBELL SPIKESHIELD Wired-In Branch Panels Surge Protective Device (SPD)
HUBBELL SPIKESHIELD Wired-In Branch Panels Surge Protective Device (SPD) Instruction Bulletin 8222-0513B Retain for future use. SPIKESHIELD Wired-In Branch Panels 8222-0513B 05/2012 Table of Contents Precautions...
More informationSYSTIMAX 360 ipatch Network Manager Module Faceplate Instructions
Instruction Sheet 860508340 SYSTIMAX Solutions SYSTIMAX 360 ipatch Network Manager Module Faceplate Instructions General The SYSTIMAX 360 ipatch Network Manager module is a SYSTIMAX approved product. This
More informationE1135C PDU and Pod Upgrade Procedure
E4030-90010 Rev. B 12/2003 In this Document... Tools Needed, 2 Contents of the Upgrade Kits, 2 Installation Procedures, 4 Verifying the Power Option of the New PDU, 4 Removing the PDU from the Support
More informationEthernet Test Access Panel (ETAP) User Manual
Ethernet Test Access Panel (ETAP) User Manual Content Page INTRODUCTION............................................................................. 1 Revision History........................................................................
More informationTermination for 568A and 568B pin configurations.
1 Termination for 568A and 568B pin configurations. The four twisted pairs in Unshielded Twisted Pair (UTP) cabling terminate in eight-pin modular jacks. There are two different pin configurations permitted
More informationDistribution Module Cat 5E Panels
Issue 1, November 2016 Distribution Module Cat 5E Panels General The CommScope distribution module panels are available in a 24- or 48-port, straight or angled configuration. The panels exceed Category
More informationM250 (M LL) Safety
M250 SAFETY M250 (M250-60-2LL) Safety Important Safety Information This document contains important instructions to use during installation of the Enphase M250 Microinverter. To reduce the risk of electrical
More informationHP UPS R/T3000 G2. Overview. Precautions. Kit contents. Installation Instructions
HP UPS R/T3000 G2 Installation Instructions Overview The HP UPS R/T3000 G2 features a 2U rack-mount with convertible tower design and offers power protection for loads up to a maximum of 3300 VA/3000 W
More information