HiPAC High Performance Actives & Passives on Chip
|
|
- Todd Joseph
- 5 years ago
- Views:
Transcription
1 HiPAC High Performance Actives & Passives on Chip
2 Passive Integration on Silicon Solutions & Target Components to be integrated Solutions Resistors Inductors Transformers Capacitors Diodes Transistors standard bipolar bipolar and and CMOS CMOS integrated circuits loss lossof of performance for for analog analog and and RF RF circuits HiPAC HiPAC--High High Performance passives and and Actives on on Chip Chip Target HiPAC: Integration of todays discretes without loss of performance
3 Integration of RF Diodes with Standard Bipolar Process 1pF 1KW 1KW 1pF 1KW 1pF 2,5W buried layer P-doped silicon f > 100 MHz: 5W Q = 10 in 50W circuits Limitations High series resistance of diode Additional parasitics Loss of RF performance
4 Integration of RF Diodes with Enhanced HiPAC Process 0,1pF 0,1pF f > 100MHz: 100kW 0,1pF 0,25W Sinker buried layer 0,5 W 100kW 100kWsemiinsulating silicon Q = 100 in 50W circuits Advanced technology issues semiinsulting silicon with much lower parasitics optimized buried layer technology with deep sinker providing very low series resistance No loss of RF performance in HiPAC technology
5 Integration of Capacitors with Enhanced HiPAC Process High Frequency medium value 0,1-200pF 10% Tolerance 6µ trench 120V Low Frequency Low frequency, high value nF 15% Tolerance 18µ trench 30V n+ n+ Semi Insulating Si substrate Silcaps =Silicon capacitor
6 Integration of Capacitors with Enhanced HiPAC Process High Frequency small value 0,1-10pF 5% Tolerance 60V, MIM ALD Caps =Metal InsulatorMetal =Atomic LayerDeposition
7 Integration of Resistors with Enhanced HiPAC Process Technologies in use Resistivity Tolerance Temperature dependance W/square % ppm/k Poly Si lightly doped % -400 Poly Si medium doped 440 5% ±100 Poly Si highly doped 90 5% 1200 TaN 20 10% ±50 Standard technologies tight difference tolerance <0,5% 5% Tolerance RS(T)/RS(25 C) C) 1,15 1,10 Rs(T)/Rs(25 1,05 1,00 p+ Poly n+ Poly p- Poly 0, Delta T
8 Integration of Resistors with Enhanced HiPAC Process Temperature compensated poly silicon resistors tight difference tolerance <0,5% 5% Tolerance Temperature Dependance 1,0200 1,0175 1,0150 1,25 % / 125 K = 100 ppm / K RS(T)/RS(25 C) 1,0125 1,0100 1,0075 1,0050 1, Ohm/Sq 420 Ohm/Sq 440 Ohm/Sq 460 Ohm/Sq 480 Ohm/Sq 1,0000 0,9975 0, T[ C]
9 ESD Sensitivity of Integrated Passives ESD pulse 15KV = 50ns 50A SilCap 1 nf / 100pF MIM Cap 10 / 1 pf Resistor 5 / 1000 Ohm Coil 5 / 50 nh Vmax 30 V / 120 V 30V 500 V 500 V Imax (50ns) 10 A 1 A / 0,1 A 6 A / 0,5A 30 A / 30 A Integrated passives are more sensitive to ESD damage than discrete passives In most applications they need protection
10 Improving ESD Hardness with Enhanced HiPAC Protection Devices Gnd + - V n+ n+ p Semi Insulating Si Substrate n p n or p n p ESD Double Diodes V~ = 5V / 14V Vclamp = 20V / 30V ESD Source IEC 64k, 15KV, 330W, 150pF Cj=10pF / 20 pf voltage dependent Protection of AF datalines and Vcc No Bias required
11 Improving ESD hardness with enhanced HiPAC protection devices ESD Protection Transistors V~ = 25V f>1mhz Vclamp = 75V p+ p+ n+ ESD Source IEC 64k 15KV, 330Ω, 150pF Semi Insulating Si Substrate n p n or p n p gnd Vcc Cj =2pF Protection of high speed datalines up to 1GHz IP3 >70dbm with 2.8V bias line
12 Improving ESD Hardness with Enhanced HiPAC Protection Devices ESD Protection PIN-Diode pair V~ = 25V f>10mhz Vclamp = 15V ESD Source IEC 64k 15KV, 330Ω, 150pF trench p+ transistor pin diode n+ buried layer sinker C line =0,2pF Semi Insulating Si Substrate Protection of high speed datalines up to 5GHz VCC gnd line IP3 >70dbm with 2.8V positive Bias
13 Improving ESD Hardness with Enhanced HiPAC Protection Devices PIN-Diodepaircombined with Double Diode line Gnd ESD Source IEC 64k 15KV, 330Ω, 150pF C line =0,2pF Protection of high speed datalines up to 2,5 GHz V CC IP3 >70dbm with 2.8V positive Bias
14 Summary of Technology Features low tolerance resistors, 20Ω -200kΩ ± 4 % tolerance, ± 1 % matching high capacitance area ratio, ~ 20fF / µm 2 C values up to 100nF, tolerance ± 10 % low leakage current < na inductors up to 100nH ± 2 % Q - values high current capabilities PIN -, Schottky -, Zenerdiodes transistors
15 Customer Benefits and Target Applications Target component count reduction improved overall quality level cost reductions board space reduction Applications low cost high performance filters ESD/EMI protection at reasonable costs passive networks providing cost and size optimization high performance switching devices balun functionality
16 HiPAC-Filters, Switches & ESD protection RF-Protection & Switches BGF220 Antenna ESD Protection BGF151, BGF152, BGF154 ESD Protection Arrays Cellular: TX/RX and Band Switch ESD Protection andaudiofilter BGF105 SIM Card Protection BGF104 High Speed MMC Filter BGF103 ESD Protection Zener FlipChip TSLP H3 Cellular GSM / PCN available now BGF100 Microphonefilter Headset BGH91B, BGH181B DC+ Harmonic TX Filter for SMARTI DC ES Ramp-Up BGF101 USB ESD Filter BGF102 Ear Line Filter BGF200 Microphonefilter cell. terminal BGH92M, BGH182M Harmonic TX filter for SMARTI DC & Balun
17 HiPAC for Cellular Phones Customers Nokia Nokia Motorola Motorola ICM ICM Sony-Ericsson Sony-Ericsson RF RF Applications H3 H3 Filter Filter Antenna Antenna ESD ESD AF AF Applications Microphone Microphone keypad keypad SIM SIM Interface Interface earphone earphone data data connector connector passive passive networks networks Quadband Transceiver TX1800/1900 TX850/900 RX900 RX1800 BGH181B BGH182M H 3 H 3 BGH91B BGH92M B B TX900 RX-filter protection against ESD Power Amplifier + Control- Circuit Antenna Switch Module filtering of unwanted RF-signals TX1800 Antenna ESD - Protection passive networks
18 HiPAC for PC & Peripherals Customers HP HP Dell Dell Intel Intel IBM IBM PCI slots Audio/Microphone Serial Parallel USB EMI / ESD-Protection EMI / ESD-Protection Power Control Applications USB USB IEEE1394 Firewire Serial Serial ATA ATA DVI DVI High-speed data data line line ESD ESD protection Southbridge IDE AGP Processor Northbridge Floppy Memory Slots
19 1,2,4 Channel ESD Protection Arrays BGF151 BGF152 BGF154 V(+) V(+) CH 4 V(+) CH 3 CH 1 CH 1 CH 2 V(-) V(-) CH 1 V(-) CH 2 Applications USB 2.0 IEEE 1394 Firewire DVI Serial ATA g. p. high speed data line Features up to ± 15 kv ESD protection low loading capacitance <1pF 1 channel BGF151 in SOT23 2 channel BGF152 in SOT channel BGF154 in SOT 363
20 BGF100 Microphone Filter 15KV ESD-protection and low pass filter circuit with ESD diodes, R s and C s Attenuation: - 6GHz GND1 GND2 GND3 1n 1n 1n Vin 50 2K 50 2K Vout 1n 1n 1n GND1 GND2 GND3
21 BGF100 Microphone Filter Attenuation 0 channel1-20 channel Frequency (GHz)
22 USB ESD Protection BGF101 Schematic Circuit and Device Specs: Low TK Resistors TCR<100 ppm/k ± 5% C line < 50 pf, target 40 pf Schottky Diode < na E3 E1 C3 C1 A3 A1 B2 D4 B4 D2, GND 15kV ESD Stability U BD =7V@1mA I L <100nA@3V 2 kv U BD =7V@1mA I L <100nA@3V
23 Ear Line Filter BGF102 Spec Request New type of S-WLP-11 package Problem 1. 4 x 5 nf need too much die area, even in P7MI Options (increased C-density) 2. Thus price would be 60% over BGF100!
24 ESD Protection Diodes BGF103 Performance Cline 10 pf ESD 15 kv Vbr min ±14 V Leakage current < V First samples feasible in March
25 High Speed MMC Interface Filter BGF104 NMP Spec NMP Concept: Common base configuration
26 H3 (SilCu) - Filter for Mobile Applications Band Band pass pass filter filtercircuit circuitwith with1kv ESD ESD protection zener zenerdiodes,, L L s and and C C s Targets replace replacelowend lowendsaw-filters higher higherinput inputpower powerlevels levelscompared to to SAWs SAWs (max. (max. 15dBm) replace replacesmd filter filterto to reduce reducesmd-partcount 0.2p VCC 13n 20n 2p 26n GND 0.8p
27 realised HiPAC products H3 Filter BGH91 Lay Out
28 Measurement Results of BGH91B - TX H3-Filter for GSM900 S21(-) differential mode S11(-) differential mode S22(-) differential mode TSLP-7-2 TSLP-7-1 3rd Harmonic 0.4 mm 1,3 mm 1.1 mm 2,0 mm 1.6 mm
STF701. T-Filter with TVS Diode Array For EMI Filtering and ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The STF701 is a low pass T-filter with integrated TVS diodes. It is designed to provide bi-directional filtering of unwanted EMI/RFI signals and electrostatic discharge (ESD) protection in
More informationApplication Note No. 103
Application Note, Rev. 1., June 27 Application Note No. 13 ESD and Antenna Protection using Infineon ESDP8RFL RF & Protection Devices Edition 27-6-27 Published by Infineon Technologies AG 81726 München,
More information1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors
1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors CM1210 Features 1,2,4 and 8 channels of ESD protection Very low loading capacitance (1.0pF typical) ±6 kv ESD protection per channel (IEC 61000-4-2
More informationApplication Suggestions for X2Y Technology
Application Suggestions for X2Y Technology The following slides show applications that would benefit from balanced, low inductance X2Y devices. X2Y devices can offer a significant performance improvement
More informationEMI/ESD Filters for Cellular Phones
EMI/ESD Filters for Cellular Phones Cellular phones, as with all handheld and wireless devices are susceptible to the damaging effects of Electrostatic Discharge (ESD) transients. As much as 40 kilovolts
More informationPower IC 용 ESD 보호기술. 구용서 ( Yong-Seo Koo ) Electronic Engineering Dankook University, Korea
Power IC 용 ESD 보호기술 구용서 ( Yong-Seo Koo ) Electronic Engineering Dankook University, Korea yskoo@dankook.ac.kr 031-8005-3625 Outline Introduction Basic Concept of ESD Protection Circuit ESD Technology Issue
More information6 Channel EMI Filter Array with ESD Protection
6 Channel EMI Filter Array with ESD Protection Features Six channels of EMI filtering for data ports Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C) network Greater than 32dB attenuation
More informationIP4220CZ6 Dual USB 2.0 Integrated ESD protection to IEC level 4
INTEGRATED DISCRETES Integrated ESD protection to IEC 61000-4-2 level 4 2004 September 17 Philips Semiconductors FEATURES ESD IEC 61000-4-2 level 4, ± 8kV contact discharge compliant protection Four ultra-low
More information0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationicex-cmtm General specs and Installation guide
icex-cmtm General specs and Installation guide 1. General view 2. Specifications 2.1. Common specs: Ethernet 1 x 10/100Base/T, RJ45 connector with traffic and link LED Serial Interface 1 x RS232/485 USB
More informationHigh Performance Analog Solutions for Digital World ESD & EMI Product Presentation
ESD & EMI Product Presentation Union Semiconductor Inc. UNION ESD Products 50nm ESD Protechtion Area Gate Oxide Thickness Trend: Chip size decreases to minimum Impact: 12.5nm 8nm Gate Oxide Thickness 4.15nm
More informationCeraDiode. Consumer Applications
Consumer Applications Benefits for customer applications What is? EPCOS is an ESD protection device: an alternative to and replacement for semiconductor diodes such as Zener and TVS diodes. offers advantages
More informationApplication Note No. 100
Application Note, Rev. 1.2, May 2007 Application Note No. 100 ESD Protection for High-Speed Applications 1- & 2-channel low capacitance bi-directional ESD diode in ultra-small TSLP package Small Signal
More informationTransient Voltage Suppressor. Operating Temperature : -55 to Storage Temperature : -55 to + 150
Operating Temperature : -55 to + 125 Full compliance on : IEC 61000-4-2 (ESD) ±15kV (air) ± 8kV (contact) IEC 61000-4-4 (EFT) 40A 5/50ns IEC 61000-4-5(Lightning) 8/20μs Low voltage operation : first in
More informationRClamp TM 0504M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are connected
More informationCeraDiodes for ESD Protection
EPCOS Sample Kit 12 CeraDiodes for ESD Protection www.epcos.com What are CeraDiodes? CeraDiodes are multilayer semiconductor ceramic components for the ESD protection of data, audio and video lines, ICs
More informationTVW MSOP 04 AD0 Engineering Specification
TVW MSOP 4 AD 1 Scope TVW MSOP 4 AD s are TVS arrays designed to protect power/control lines and high-speed signal lines from overvoltage hazard of Electrostatic Discharge (ESD), Electrical Fast Transients
More informationUMD 1423 UNITED MICRO DEVICE INC. Pi filter array with ESD protection. PRODUCT DESCRIPTION APPLICATIONS. This device has 20-bumps 4.
PRODUCT DESCRIPTION UMD1423 is a Pi filter array with TVS diodes for ESD protection. This device has six Pi filters integrated along with four channels of ESD protection. The Pi filters have values of
More informationPESDR0554S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Ordering Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationEClamp2422N. ESD/EMI Protection for Audio Interfaces PRELIMINARY
PROTETION PRODUTS - EMIlamp TM Description The Elamp TM 2422N is a (-L-) low pass filter array with integrated TVS diodes. It is designed to suppress unwanted EMI/RFI signals and provide electrostatic
More informationRF ESD Protection Strategies The Design and Performance Trade-off Challenges
RF ESD Protection Strategies The Design and Performance Trade-off Challenges Ph.Jansen, S.Thijs, D.Linten, M.I.Natarajan V.Vassilev, M.Liu, D.Trémouilles, S.Decoutere, G.Groeseneken T.Nakaie, M.Sawada,
More information2 Channel Headset EMI Filter with ESD Protection
2 Channel Headset EMI Filter with ESD Protection Features Two channels of EMI filtering, one for a microphone and one for an earpiece speaker Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C)
More informationSP5001 Series 4 Channel Common Mode Filter with ESD Protection
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel Common Mode Filter with ESD Protection RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF) providing
More informationIEC (EFT) 40A
Features ESD Protect for high-speed I/O channels Provide ESD protection for each channel to IEC 61000-4- (ESD) ±1kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (/0ns) IEC 61000-4- (Lightning) 1A (8/0µs)
More informationAND8275/D. Use of NUF4220MN for ESD Protection and EMI Filtering of Audio Lines APPLICATION NOTE. Prepared by: Ryan Hurley ON Semiconductor
Use of NUF22MN for ESD Protection and EMI Filtering of Audio ines Prepared by: Ryan Hurley ON Semiconductor APPIATION NOTE Background Demand for better audio performance with higher efficiency in cell
More information*Note: Operation beyond this range is possible, but has not been characterized. PART. Maxim Integrated Products 1
19-8; Rev ; 2/ EVALUATION KIT AVAILABLE 8MHz to MHz Variable-Gain General Description The MAX6 general-purpose, high-performance variable-gain amplifier (VGA) is designed to operate in the 8MHz to MHz
More informationINTEGRATED EMI FILTER/ESD PROTECTION FOR LCD DISPLAYS IN MOBILE HANDSETS
INTEGRATED EMI FILTER/ESD PROTECTION FOR LCD DISPLAYS IN MOBILE HANDSETS Manufactured by: Integrated Products Group Garden Grove, CA Telephone: (714) 891-6171 More than solutions enabling possibilities
More informationTransient Voltage Suppressor. Operating Temperature : -55 to Storage Temperature : -55 to + 150
Operating Temperature : -55 to + 125 Storage Temperature : -55 to + 150 Packaging Method : Tape & Reel(per Specifications) Features: Full compliance on : IEC 61000-4-2 (ESD) ±15kV (air) ± 8kV (contact)
More informationSRV05-4 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data
More informationCM1293A-04SO. 4-Channel Low Capacitance ESD Protection Array
CM1293A-04SO 4-Channel Low Capacitance ESD Protection Array Product Description CM1293A 04SO has been designed to provide ESD protection for electronic components or subsystems requiring minimal capacitive
More informationWS05R. Features SOT-143. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) Pin 4. Pin 3. Pin 2. Pin 1 SOT-143 (Top View)
Document: W, Rev: C Transient Voltage Suppressor Features 5 Watts Peak Power per Line (tp = 8/μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More informationAZC002-02N Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)
Features ESD Protect for 2 high-speed I/O channels Provide ESD protection for each channel to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) (5/50ns) Level-3, 20A for I/O, 40A for
More informationEMIF06-HSD04F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Features. Application.
6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Features Datasheet production data Figure 1. Pin configuration (bump side) Very low line capacitance to compensate long
More informationRClamp0554S RailClamp Low Capacitance TVS Diode Array
- RailClamp Description RailClamp is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp0504S RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationLite-On Semiconductor DSC Platform Solutions.
Lite-On Semiconductor DSC Platform Solutions 1 sales@worldproducts.com www.worldproducts.com LENS ESD CCD/CMOS SENSOR AF,IRIS,SHUTTER ESD Adapter USB Battery Battery Charger DSC Block Diagram Motor Driver
More information250 Mbps Transceiver in LC FB2M5LVR
250 Mbps Transceiver in LC FB2M5LVR DATA SHEET 650 nm 250 Mbps Fiber Optic Transceiver with LC Termination LVDS I/O IEC 61754-20 Compliant FEATURES LC click lock mechanism for confident connections Compatible
More informationGlass Ceramic ESD Suppressor
Glass Ceramic ESD Suppressor Ideal ESD Suppressor for Ultra High Speed Lines 2014.2 1/19 Contents Development Background Electrical Characteristics Application in Circuit IC Module Mobile RF Antenna TV/STB
More informationASH Transceiver 10 mw Power Amplifier Circuit Board
ETSI SRD regulations allow up to 10 mw of transmitter power at 33.92 MHz, and up to 25 mw of transmitter power at 868.35 MHz. For those applications where maximum range is of primary important and low
More informationAZC099-04S 4 IEC (ESD)
Features ESD Protect for 4 high-speed I/O channels Provide ESD protection for each channel to IEC 000-4- (ESD) ±kv (air), ±8kV (contact) IEC 000-4-4 (EFT) (/0ns) Level-3, 0A for I/O, 40A for Power IEC
More informationSFC ChipClamp ΤΜ Flip Chip TVS Diode with T-Filter PRELIMINARY Features
Description The SFC2282-50 is a low pass T-filter with integrated TVS diodes. It is designed to provide bidirectional filtering of EMI/RFI signals and electrostatic discharge (ESD) protection in portable
More informationEM8D-100L EMI FILTER/TVS ARRAY DESCRIPTION DFN-16 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAM & PIN CONFIGURATION
EMI FILTER/TVS ARRAY DESCRIPTION The is a DFN-16, 8 line low pass filter array with integrated TVS diodes. The is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationEMIF06-USD14F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Applications. Description. Features.
6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Applications Datasheet production data Flip Chip (15 bumps) Consumer and computer electronics with micro-sd card such
More informationLow Voltage Bandgap References and High PSRR Mechanism
Low Voltage Bandgap References and High PSRR Mechanism Vahe Arakelyan 2nd year Master Student Synopsys Armenia Educational Department, State Engineering University of Armenia Moscow March 21-24, 2011 Outline
More information0504A PESDR0504S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationAZC002-04S Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)
Features ESD Protect for 4 high-speed I/O channels Provide ESD protection for each channel to IEC 000-4- (ESD) ±kv (air), ±8kV (contact) IEC 000-4-4 (EFT) (/0ns) Level-3, 0A for I/O, 40A for Power IEC
More informationLatch-Up. Parasitic Bipolar Transistors
Latch-Up LATCH-UP CIRCUIT Latch-up is caused by an SCR (Silicon Controlled Rectifier) circuit. Fabrication of CMOS integrated circuits with bulk silicon processing creates a parasitic SCR structure. The
More informationSystem-Level and Application Specific ESD Protection Guide
2009 Littelfuse, Inc 1 Introduction: Designers of today s electronic devices have demanded more functionality with greater flexibility and higher levels of user interaction. These circumstances have helped
More informationAOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The AOZ889ADI is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2., USB 3./3.1, MDDI, SATA, and Gigabit
More informationG IP3=38. P1dB= Single. Units
Product Description SG0 SG0 is a high performance InGaP HBT amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable current over temperature
More informationSP5001 Series 4 Channel TVS Common Mode Filter
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel TVS Common Mode Filter RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF providing both ESD protection
More informationWE05R. Features. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) SOT-143 (Top View) Document: W , Rev: A
Document: W0005, Rev: A Transient Voltage Suppressor Features 00Watts Peak Power per Line (tp = 8/0μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More informationWS05-4RUL SOT-23-6L. Features IEC COMPATIBILITY (EN ) Transient Voltage Suppressor. SOT-23-6L (Top View) Document: W , Rev: D
Document: W34, Rev: D Transient Voltage Suppressor Features Solid-state silicon-avalanche technology 4Watts Peak Pulse Power per Line (t p =8/μs) Low operating and clamping voltage Up to four I/O Lines
More informationDS WIRE INTERFACE 11 DECOUPLING CAP GND
Rev ; 4/3 Hex Nonvolatile Potentiometer with General Description The contains six 256-position nonvolatile (NV) potentiometers, 64 bytes of NV user EEPROM memory, and four programmable NV I/O pins. The
More informationGRF4002. Released. Broadband LNA/Linear Driver GHz. Product Description. Features. Applications
Product Description Features Reference: 5V/70mA/2.5 GHz EVB NF: 0.85 db Gain: 15.0 db OP1dB: 23.5 dbm OIP3: 36.5 dbm is a broadband low noise gain block designed for small cell, wireless infrastructure
More informationChapter 2 On-Chip Protection Solution for Radio Frequency Integrated Circuits in Standard CMOS Process
Chapter 2 On-Chip Protection Solution for Radio Frequency Integrated Circuits in Standard CMOS Process 2.1 Introduction Standard CMOS technologies have been increasingly used in RF IC applications mainly
More informationCitrusCom CS0801S. Applications. Features. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration
Features Transient protection for high-speed data lines IEC 61000-4-2 (ESD) ±15kV (Air) ±8kV (Contact) IEC 61000-4-4 (EFT) 40A (5/50 ns) Cable Discharge Event (CDE) Package optimized for high-speed lines
More informationRClamp0504PA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
More informationUSBUF01P6 EMI FILTER AND LINE TERMINATION FOR USB UPSTREAM PORTS IPAD
IPAD USBUF01P6 EMI FILTER AND LINE TERMINATION FOR USB UPSTREAM PORTS APPLICATIONS EMI Filter and line termination for USB upstream ports on: - USB Hubs - PC peripherals FEATURES Monolithic device with
More informationAccess PIN-TIA Receivers for 155 Mb/s and 622 Mb/s EDR 51xx Series
COMMUNICATIONS COMPONENTS Access PIN- Receivers for 55 Mb/s and 6 Mb/s EDR 5xx Series Applications Single mode 55 Mb/s (EDR 5x) and 6 Mb/s (EDR 55x) ATM receivers Campus network backbone - Add/drop multiplexers
More informationTypical Performance 1. 2 OIP3 _ measured with two tones at an output of 0 dbm per tone separated by 1 MHz. RFout
Device Features 3 ~ 3.3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-343 package Product Description BeRex s BGS6 is a high SiGe HBT MMIC amplifier,
More informationSingle Channel Protector in a SOT-23 Package and a MSOP Package ADG465
Data Sheet Single Channel Protector in a SOT-23 Package and a MSOP Package FEATURES Fault and overvoltage protection up to ±40 V Signal paths open circuit with power off Signal path resistance of RON with
More informationFB2M5KVR. 250 Mbps Fiber Optic OptoLock Transceiver Data Sheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FB2M5KVR 250 Mbps Fiber Optic OptoLock Transceiver Data Sheet DESCRIPTION Firecomms Industrial OptoLock transceiver has a small form factor housing which combines a pair of Firecomms fiber optic components
More informationAlfa-MOS Technology. AFE0563 One-Line ESD Protection Low Capacitance Bi-direction TVS. General Description. Pin Description ( DFN )
General Description are designed by bi-direction TVS diode, to protect high speed data interfaces. This product has been specifically designed to protect sensitive components which are connected to data
More informationDS1233A 3.3V EconoReset
3.3V EconoReset www.maxim-ic.com FEATURES Automatically restarts microprocessor after power failure Monitors pushbutton for external override Internal circuitry debounces pushbutton switch Maintains reset
More informationAOZ8882. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The AOZ8882 is a transient voltage suppressor array designed to protect high speed data lines such as HDMI, MDDI, USB, SATA, and Gigabit Ethernet
More informationAT-31011, AT Low Current, High Performance NPN Silicon Bipolar Transistor. Data Sheet. Description
AT-3111, AT-3133 Low Current, High Performance NPN Silicon Bipolar Transistor Data Sheet Description Avago s AT-3111 and AT-3133 are high performance NPN bipolar transistors that have been optimized for
More information3SM201KMF0KB MEMS Microphone
Product Description The is a monolithic MEMS top performing miniature digital microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit followed by
More informationHeadset/Speaker EMI Filter with ESD Protection CM1416/D. Features. Product Description. Applications. ±30kV ESD protection on each channel per
Headset/Speaker EMI Filter with ESD Protection CM1416 Features Functionally and pin compatible with the CSPEMI201A and CM1411 OptiGuard coated for improved reliability at assembly Two channels of EMI filtering
More informationAnalog and Telecommunication Electronics
Politecnico di Torino Electronic Eng. Master Degree Analog and Telecommunication Electronics F1 - Power devices: diodes» Switches» pn Junction» Diode models» Dynamic behavior» Zener diodes AY 2015-16 26/04/2016-1
More informationEClamp2410P. ESD Protection Device for T-Flash/MicroSD Interfaces PRELIMINARY. PROTECTION PRODUCTS - EMIClamp TM Description.
- EMIClamp TM Description The EClamp TM 240P is a combination EMI fi lter and line termination device with integrated TVS diodes for use on Multimedia Card interfaces. This state-of-the-art device utilizes
More informationPESD5V0U2BT. 1. Product profile. Ultra low capacitance bidirectional double ESD protection diode. 1.1 General description. 1.
Ultra low capacitance bidirectional double ESD protection diode Rev. 01 27 March 2007 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance bidirectional double ElectroStatic
More informationFB2M5LVR 250 Mbps Fiber Optic LC Transceiver Data Sheet
PCN issued July 0 Please see new version available: FBMLVR Datasheet Rev. E FBMLVR 0 Mbps Fiber Optic LC Transceiver Data Sheet DESCRIPTION Firecomms industrial LC connector has a small form factor housing,
More information3.3 V, SILICON GERMANIUM MMIC WIDE BAND AMPLIFIER
DESCRIPTION BIPOLAR ANALOG INTEGRATED CIRCUIT PC3242TB 3.3 V, SILICON GERMANIUM MMIC WIDE BAND AMPLIFIER The PC3242TB is a silicon germanium monolithic integrated circuit designed as IF amplifier for DBS
More informationXRD87L85 Low-Voltage CMOS 8-Bit High-Speed Analog-to-Digital Converter
Low-Voltage CMOS 8-Bit High-Speed Analog-to-Digital Converter April 2002-1 FEATURES 8-Bit Resolution Up to 10 MHz Sampling Rate Internal S/H Function Single Supply: 3.3V VIN DC Range: 0V to V DD VREF DC
More informationESD Protection Diode for Smartphone
ESD Protection Diode for Smartphone Accountability Customer Focus Mutual Trust and Collaboration Innovation Learning and Growth Electrostatic Discharge IEC61000-4-2 Level Test Voltage Contact Discharge
More informationLow Current, High Performance NPN Silicon Bipolar Transistor. Technical Data AT AT-32033
Low Current, High Performance NPN Silicon Bipolar Transistor Technical Data AT-311 AT-333 Features High Performance Bipolar Transistor Optimized for Low Current, Low Voltage Operation 9 MHz Performance:
More informationFB1M2KPR. Industrial Ethernet Fiber Optic OptoLock Transceiver Data Sheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FB1M2KPR Industrial Ethernet Fiber Optic OptoLock Transceiver Data Sheet DESCRIPTION Firecomms Industrial OptoLock transceiver has a small form factor housing which combines a pair of Firecomms fiber optic
More informationBy Joe Grimm, Business Development Manager, RFIC Switches, California Eastern Laboratories
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 988-3500 Facsimile: (408) 988-0279 CMOS RFIC Switches: Simple and inexpensive, the latest 2.5GHz versions pose a legitimate challenge
More informationEDL300T 125 Mbps Fiber Optic OptoLock Transceiver Data Sheet
EDL300T 125 Mbps Fiber Optic OptoLock Transceiver Data Sheet DESCRIPTION Firecomms Ethernet OptoLock transceiver combines a pair of Firecomms Fast Ethernet fiber optic components within a miniature housing
More informationEMI2180 Common Mode Filter with ESD Protection
Common Mode Filter with ESD Protection Functional Description The EMI280 is an industry first Common Mode Filter tuned to MHL speed (CMF) with integrated ESD protection. Differential signaling I/Os can
More informationRClamp0502A RailClamp Low Capacitance TVS Array
- RailClamp Description The RailClamp series consists of ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationRClamp0504FA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp0504F RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationESD Protection Structure with Inductor-Triggered SCR for RF Applications in 65-nm CMOS Process
ESD Protection Structure with Inductor-Triggered SCR for RF Applications in 65-nm CMOS Process Chun-Yu Lin 1, Li-Wei Chu 1, Ming-Dou Ker 1, Ming-Hsiang Song 2, Chewn-Pu Jou 2, Tse-Hua Lu 2, Jen-Chou Tseng
More informationGRF4200. Preliminary. High Gain, Linear Driver Tuning Range: GHz. Product Description. Features. Applications
Product Description Features Reference: 5V/35mA/1.9 GHz EVB NF: 4.0 db Gain: 21.5 db OP1dB: 18.0 dbm is a linear gain block designed for small cell, wireless infrastructure and other high performance applications.
More informationMedium Power Wireless Energy Harvesting Assembly
Overview The RFD-ASSY-01 is a medium power RF-DC converter assembly that uses four RFD102A RF-DC converter modules and one RFD88A energy harvesting engine module for capacitor charge/discharge power management.
More informationXRD8775 CMOS 8-Bit High Speed Analog-to-Digital Converter
CMOS 8-Bit High Speed Analog-to-Digital Converter April 2002-4 FEATURES 8-Bit Resolution Up to 20MHz Sampling Rate Internal S/H Function Single Supply: 5V V IN DC Range: 0V to V DD V REF DC Range: 1V to
More informationDS1810 5V EconoReset with Push-Pull Output
5V EconoReset with Push-Pull Output www.maxim-ic.com FEATURES Automatically restarts a microprocessor after power failure Maintains reset for 150 ms after V CC returns to an in-tolerance condition Reduces
More informationX2Y - series Surface-mount ceramic EMI filter
DISCRETE CERAMICS X2Y series Surface mount component June 2002 Rev 6 X2Y - series 2002 July 26 v1.07 www.yageo.com X2Y Series Table of Contents 1. Introduction, Benefits, Applications 2. Available Capacitances
More informationESD Protection Design on T/R Switch with Embedded SCR in CMOS Process
ESD Protection Design on T/R Switch with Embedded SCR in CMOS Process Tao-Yi Hung and Ming-Dou Ker Institute of Electronics, National Chiao Tung University, Hsinchu, Taiwan Abstract- ESD protection design
More informationGRF2012. Released. Broadband Linear Gain Block 0.05 to 3.8 GHz. Product Description. Features. Applications
Product Description Features Reference: 5V/90mA/900 MHz Gain: 14.8 db OIP3: 40.0 dbm OP1dB: 23.0 dbm NF: 2.7 db Reference: 8V/100mA/900 MHz is a broadband gain block with low noise figure and industry
More informationRev 1.0. One-ch, Features. The. line outputt. removal of designed to. The. Capacitors. while reducing components. 6dB. for noise. The.
2rms Audio Line Driver with Integrated Onech, 6 th Order SD ideo Filter Features Line Output: able to drive 600ohm and 10kΩ 2rms With 3.3 Supply oltage No Pop/Clicks Noise at the line outputt when Power
More informationINPAQ Global RF/Component Solutions
TVL SC7 4 AC Specification Product Name Series Part No Package Size Transient Voltage Suppressor TVS Series TVL SC7 4 AC SC7-6L TVL SC7 4 AC Engineering Specification 1. Scope TVL SC7 4 AC s are TVS arrays
More informationDescription. Features
1 Description This device is an extension cable between USB device and host (computer) with embedded into connector intelligent integrated circuits on both sides of the cable. The USB cable with the chip
More informationPRODUCTION DATA SHEET
The LX70 is an integrated Universal Serial Bus () line termination device with an EMI filter and ESD protection diodes. This device offers a cost effective and compact solution for one upstream port. The
More informationPESDxU1UT series. 1. Product profile. Ultra low capacitance ESD protection diode in SOT23 package. 1.1 General description. 1.
Rev. 01 11 May 2005 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance ElectroStatic Discharge (ESD) protection diode in a SOT23 (TO-236AB) small SMD plastic package designed
More informationPART OBSOLETE NO ALTERNATE PART. Features W-WLB Bottom View
2 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (min I PP (max C T (typ 6V 7.5A.8pF Description The is a high-performance device suitable for protecting two high speed I/Os. These devices
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
More information