Digitizing a Logo. Supplies. Software Instructions:
|
|
- Byron Wade
- 6 years ago
- Views:
Transcription
1 Digitizing a Logo Created by Debbi Lashbrook Use the tools of BERNINA Embroidery Software 7 to create a logo from a converted vector image; then feature your logo on Bella Nonna s Zippety Wine Bag. Supplies Machine & Accessories BERNINA Embroidery Software 7 BERNINA Sewing & Embroidery Machine Medium Hoop Reverse Pattern Foot #1 or 1C or 1D Zipper Foot #4 or 4D Buttonhole Foot #3A Fabric & Notions Bella Nonna Zippety Wine Bag 1 fat quarter OESD Ultra Clean and Tear Away Stabilizer Dritz Wonder Tape Microtex Needles - Sizes 70 & 80 Threads Isacord Thread to coordinate with fabric Embroidery Bobbin thread Mettler #60 wt. thread for lettering Software Instructions: Creating the Template: Open BERNINA Embroidery Software 7 by double clicking on the desktop icon. Right click on Show Hoop and select BERNINA Medium Hoop, 130 x 100, #26. Make sure Show Hoop is checked, click OK. In the Digitize toolbox, select the Rectangle tool. Select the single outline stitch from the Stitch Toolbar.
2 Click and drag a rectangle on the design screen within the hoop. Press Esc or select the Select Object Tool. Select the rectangle. In the Transform Toolbar, make sure Proportional Scaling is in the unlocked position and change the dimensions of the rectangle to 4 in width and 3.5 in height. Press Enter. Don t be concerned that it is outside the hoop. Right click on the rectangle to open Object Properties. Change the stitch length to 5mm; click Apply. Select the Tie-In/Off tab and select Off for both the Tie-In & Tie-Off. Press OK. Right click on Show Grid. Change the values of both the Horizontal & Vertical Grid Spacing to 1mm (.04 ). Make sure Show Grid is checked and press OK. The grids with serve as a guideline for the lettering. You want to make sure the lettering columns are at least 1mm wide. Create the Lettering: Switch to Artwork Canvas. Select the Vector Lettering icon. Click on the screen within the rectangle. From the drop down font choices, select Lucida Calligraphy as your font. Type Lollipops. While the Vector Lettering icon selected, click and drag over the lettering to highlight the lettering. Hint: Click within the selection boxes that surround the letter. Make sure Lock Ratio is in the locked position and change the Height of the letters to.5. Press Enter. Deselect the lettering; then reselect the Vector Lettering icon. Click on the screen below the word Lollipops. Select Arial for the font type from the drop-down choices. Activate Caps Lock and type PARTY PLANNING. With Lock Ratio still locked, change the Height of the letters to.25. Press Enter. Select the Select Artwork Object icon; draw a bounding box around the two words. In the Arrange menu, select Align and Distribute; then Arrange Centers Vertically. While the letters are selected, click on a color chip from the Color Palette. Select Convert Artwork to Embroidery. Press 0 on your keyboard to show the design in full screen. While the words are selected, move them into the lower part of the rectangle. Select Zoom and zoom in close to the lettering to check that the satin column width is at least 1 grid space (1mm). If not, select the lettering and right click on the lettering to open Object Properties and change the Width percentage to 110%; then press Apply and recheck the width. Deselect; the words; then select Lollipops and move the word so it is about 4 grids from Party Planning. Use the up and down arrows of the keyboard to keep the words centered with one another. Click on Show Grid to hide the grid.
3 Create the Logo Switch back to Artwork Canvas. Click on Load Artwork. Navigate to the location of lollipop.png. Select the file and click on Import. Press Enter. While the artwork is selected, click on Quick Trace. Open Object Manager. Select the Lollipop.png and press delete. Select the vector artwork and use the resizing handles to decrease the size so that the lollipops are about 2 tall. Check the Property Bar for the dimensions. Place the lollipops above the lettering. With the lollipops selected, click on Convert Artwork to Embroidery. Editing the Logo While the lollipop embroidery is selected, press Ctrl G to group them. Select Ctrl A or Edit> Select All and in the Arrange Toolbox, select Align Vertical Centers. Press 0 on the keyboard to zoom into the design. Select Slow Redraw to watch the design stitch. Make note of any changes that need to be made. There are changes in sequence that must be done. The design is much too dense for its size some changes in type of stitch and density would improve the design. There are long satin floats in two of the lollipops that need to be changed. There are some single stitches that must be deleted from the lollipop sticks. Close Slow Redraw. Select the lollipops and select Ctrl + U to ungroup them. If Color Film is not open, click on the Color Film icon. Select the colors of the lollipop sticks in Color Film while holding the Ctrl key and select Move to Start. Select the rectangle in Color Film and click on Move To Start. Select View> View by Color. In the dialog box, select the colors of the large circles of the lollipops use Color Film sequence as a guide. Check the Color Code number in the dialog box with the Color Code number in Color Film. Select OK. Select the purple swirl, the darker green swirl, and the coral swirl in Color Film while holding the Ctrl key and press Delete. Select Ctrl A to select all the remaining circles. Right click on Ripple Fill. Change the Stitch Spacing to 1mm. Click OK. Select View> View By Color. Select the color chips for the satin centers, again using Color Film as a guide and holding down the Ctrl key to select multiples. Press OK. Select the blue inner satin swirl; then select Add Stitch Angles in the Edit Toolbox. Set four angles around the swirl using two left clicks and placing the angles at 12:00, 3:00, 6:00, and 9:00. Press Enter to activate the angles.
4 While the design is in Reshape mode, make the satin stitch more narrow by clicking on the blue nodes and dragging them to make a more narrow satin stitch. You may add reshape points by right clicking on the edge of the satin swirl; then move as needed. You can change any yellow nodes to a blue (curved) node by selecting it and pressing the space bar. You can also select a node and press Delete to eliminate a node. If the angles need to be readjusted, click on the peach square and drag the angle to adjust as needed. Press Esc when finished. Select the center satin and dot and press Delete. For the remaining lollipops, select the satin swirls and the center satin dots while holding the Ctrl key; press Delete. Select the two blue swirls while holding the Ctrl key and select Copy. Select Paste and move the copied set of swirls to the green lollipop. Select Paste again and move this set of swirls to the peach lollipop. To change the color of the swirls, select the Color Picker icon and select the peach satin outline. Move your cursor to each of the satin swirls of the peach lollipop and apply the peach color by clicking on each of the swirls. Repeat the steps for the green lollipop. Press Esc. Select Edit> Select All and right click to open Object Properties. Click in front of Satin Spacing> Manual. Change the value to.45mm. Press OK. Select View> View All Colors. Select the white color chip in Color Film and press Move to End. There are a couple of stray stitches that must be deleted as well. Zoom into the yellow lollipop stick. There is a yellow stitch that shows on top of the green. Select the stitch and press Delete. Repeat this for the stray stitch on the blue stick. Other Editing Possibilities For stitching the design on a fabric other than a Woven Medium Weight Fabric, you may wish to change the fabric settings. If you wish to change the settings, Select Design> Fabric. Select the Fabric Type from the drop-down choices. The software automatically updates the settings for your selected fabric. If you are stitching the design on a woven medium weight fabric and you wish to make the letters bolder, you may adjust the pull compensation. This is also a good thing to do for the automatically generated embroidery.
5 Select Edit> Select All. Select the Effects icon. In the Others Tab, check Pull Compensation (you will need to check the box twice) and change the Pull setting to.4mm. Press OK. To change the density of the lettering, select the lettering by holding the Ctrl key and right click to open Object Properties. Select the Fill Stitch Tab, place a dot in front of Manual Satin Spacing and change the spacing to.45. Press OK. Opening up Lettering If any of the inner areas of your lettering need to be opened up, you can select the lettering you need to edit and in the Edit Toolbox, select Break Apart. The first time you select Break Apart, the phrase is broken into words; then the word, into letters, and finally the letter, into stitches. You will need to re-select the word; then select Break Apart. Then reselect the letter and select Break Apart. The illustrations below show how to open up the letter A in PARTY PLANNING. After the letter is broken into stitches, select the bar of the letter A and move to open up the inner space. Finalizing the Design Select Slow Redraw once again to watch the design stitch out. In Color Film, select the green satin swirls color chip and drag to stitch after the green satin ring. Drop the color chip in the space between the color chips. Select Hoop Canvas, select the hoop, and Rotate Left two times. Return to Embroidery Canvas and save your design. Write the design to the machine of your choice.
A Study of Angles & Curves
A Study of Angles & Curves Method 1: Cutting Quilt Shapes/Using the Shapes Tools Open BERNINA CutWork Software. Make sure that Create New is selected. Click Next. Place a dot in front of New Graphic. Select
More informationMY BERNINA EMBROIDERY MASTERY BOOK SERIES SOFTWARE BERNINA EMBROIDERY SOFTWARE 8.1. WORKBOOK 2 Automatic Digitizing
MY BERNINA EMBROIDERY MASTERY BOOK SERIES SOFTWARE BERNINA EMBROIDERY SOFTWARE 8.1 WORKBOOK 2 Automatic Digitizing 2017 BERNINA of America. 02/012017 Table of Contents Introduction... 3 Exercises Auto-Digitize...
More informationCreative Sewing Machines Workbook based on BERNINA Embroidery Software V8.1
: Photosnap Edited for 8.1 This lesson has been rewritten to reflect V8.1 changes from the original 8.0 version. Another auto digitizing feature of BERNINA Embroidery Software V8 is PhotoSnap. PhotoSnap
More informationDesignWorks- CrystalWork Skillbuilder
DesignWorks- CrystalWork Skillbuilder Crystal Shapes & Fills The following exercise will cover the basics of filling and editing a Crystal shape. For detailed CrystalWork software instructions, review
More informationCreative Sewing Machines Workbook based on BERNINA Embroidery Software V8
V8 Lesson 49 Using an Object for a Carving Stamp Edited for V8.1 update. We will start by using Corel to find and save an image. On your desktop there should be 4 Corel icons. I have grouped mine together
More informationChapter 16. Version 1.5 Features. Contents: Chapter 16
Chapter 16 Version 1.5 Features Contents: New Version 1.5 Screen Overview...p.16-2 View Preferences - New Hoop Settings...p.16-2 View Preferences - New Canvas Settings... p.16-11 Keyboard Shortcuts...p.16-13
More informationARTLink 8 Basics JUST EMBROIDER IT! BERNINA ebook Series. Written by: Debbie Lashbrook, BERNINA Educator Software Specialist
BERNINA ebook Series JUST EMBROIDER IT! ARTLink 8 Basics Written by: Debbie Lashbrook, BERNINA Educator Software Specialist Basic Features Open and View Designs Modify Designs Print a Template Send Designs
More informationCREATE A ROADMAP WITH A BOTTLE OF WINE
1 CREATE A ROADMAP WITH A BOTTLE OF WINE 2 PLANNING AND DIGITISING YOUR OWN DESIGNS BERNINA Embroidery Software Designer Plus V5 and 6. PLANNING THE DESIGN. Good embroidery is the result of careful planning.
More informationDesignWorks Software Workbook
DesignWorks Software Workbook Part 1: Beginner DesignWorks Workbook Table of Contents Introduction... 3 Getting Started... 4 Setting Your Options... 5 Things to Know... 7 Workspace Tour... 8 Icon Cheat
More informationFILE MENU New Starts a New Blank Canvas Open- Allows you to import designs into the program. Close- Closes the current Design
1 Quick Start Guide This guide is intended to give you an overview of the function of the program. The guide is arranged by section, Each section corresponds to the different pulldown menus in the program.
More informationFall Leaves Andrea Mattina
Fall Leaves Andrea Mattina Before starting this project, we need to make sure we are working in millimeters. To change to millimeters, select View from the menu bar and scroll down to View Preferences.
More informationLove is a Puzzle. This monogram combines PaintWork, Stitching and CrystalWorks for a truly unique style that pops!
Love is a Puzzle Created by Sylvain Bergeron This monogram combines PaintWork, Stitching and CrystalWorks for a truly unique style that pops! It also leverages existing resources provided with your DesignWorks
More informationContents Toolbox Tools Standard Tools View 4 Add Design Select 4 Edit 4 Lettering 6 Monogram 7 Design Colors Sew Sequence Bounding Box
Help Contents Toolbox Tools 3 Standard Tools 4 View 4 Add Design 4 Select 4 Edit 4 Lettering 6 Monogram 7 Design Colors 7 Sew Sequence 7 Bounding Box 8 Shortcuts 9 Install Toolbox on your Windows Computer
More informationTruEmbroidery Software Program
1 Page Get to Know TruE Studio, an Application of the TruEmbroidery Software Program By Janie Lantz TruE Studio gives you tools to create quick designs or combine existing embroideries. Save as unmerged
More informationUSER GUIDE DESIGN LAYOUTS
USER GUIDE DESIGN LAYOUTS Introduction COPYRIGHT Copyright 1998-2016. Wilcom Pty Ltd, Wilcom International Pty Ltd. All Rights reserved. All title and copyrights in and to Digitizer Embroidery Software
More informationLuggage Tag. 1. Open Creative DRAWings. 2. Left click on on the new design menu.
Luggage Tag 1. Open Creative DRAWings. 2. Left click on on the new design menu. 3. Left click on and then in the circle next to New graphic. 4. For the hoop, select None. 5. Choose the desired fabric type
More informationTrace Bitmap. Chapter 7. A. Page Size. Step 1. Click File Menu > New (Ctrl-N).
Chapter 7 Trace Bitmap Riverview Rams Sarasota High Booker High A. Page Size. Step 1. Click File Menu > New (Ctrl-N). Step 2. Set page size in the Property bar: Width to 3.2 Fig. 1 Height to 2 Step 3.
More informationMY BERNINA EMBROIDERY MASTERY BOOK SERIES SOFTWARE BERNINA EMBROIDERY SOFTWARE 8.1. WORKBOOK 1 Basic Features
MY BERNINA EMBROIDERY MASTERY BOOK SERIES SOFTWARE BERNINA EMBROIDERY SOFTWARE 8.1 WORKBOOK 1 Basic Features 2017 BERNINA of America. 02/012017 Table of Contents Introduction... 3 Software Information
More informationEmbossed Embroidery Designs: Sewing Room Towel
Embossed Embroidery Designs: Sewing Room Towel Janie Lantz In Embroidery, Embossing is a technique that flattens nap or pile in a high loft fabric, or flattens areas in puffy quilts, so part of the embroidery
More informationL E S S O N 2 Background
Flight, Naperville Central High School, Naperville, Ill. No hard hat needed in the InDesign work area Once you learn the concepts of good page design, and you learn how to use InDesign, you are limited
More informationQuick Start Guide for EOS / TES
1 Quick Start Guide for EOS / TES (If you are not comfortable with the basic functions of a computer, seek local assistance before proceeding.) How to install EOS/TES Important: for Windows 2000 or XP
More informationAlignment Tools. Supplies and Tools. Created by Susan Beck
Alignment Tools Created by Susan Beck Learn to use the Alignment Tools of Version 6 by creating three compositions using letters from the BERNINA Exclusive design collection, To the Letter. Supplies and
More informationGenerations Monograms + Monogramming Masterpieces By Bernadette Griffith Generations Software
Creating monograms in Generations Monograms+ is a snap. Just select one of the build in monogram templates, a True Type Font lettering style and one of the decorative borders and frames included in the
More informationDrawing shapes and lines
Fine F Fi i Handmade H d d Ch Chocolates l Hours Mon Sat 10am 6pm In this demonstration of Adobe Illustrator CS6, you will be introduced to new and exciting application features, like gradients on a stroke
More informationMastering Your. CutWork Software V.1. Owner s Workbook
Mastering Your CutWork Software V.1 Owner s Workbook MASTERING YOUR BERNINA CUTWORK SOFTWARE 2010 1 CutWork Table of Contents Introduction... 3 Product Registration... 4 Getting Started... 5 Review of
More informationStitchGraph User Guide V1.8
StitchGraph User Guide V1.8 Thanks for buying StitchGraph: the easy way to create stitch layouts for hardanger and other complex embroidery stitch types. StitchGraph is intended to allow you to create
More informationSession 7 MS Word. Graphics. Inserting Clipart, and Graphics Modify graphics Position graphics
Session 7 MS Word Graphics Inserting Clipart, and Graphics Modify graphics Position graphics Table of Contents Session 7 Working with Graphics... 1 The Toolbar... 1 Drawing Toolbar... 1 Picture Toolbar...
More information6D Embroidery Software - Pretty Paisleys
6D Embroidery Software - Pretty Paisleys By: Soni Grint Learn what type of picture is best to use for a background while digitizing these pretty paisleys. Adjust the picture as needed before placing stitches.
More informationLetters Letters Letters
Letters Letters Letters In 5D Embroidery Extra By Janie Lantz, Software Education Specialist Software Modules Used: 5D Embroidery Extra Software Lettering is one of the most frequently used tools in our
More informationMonogrammed Tea Towels
Monogrammed Tea Towels Use your creative talents to digitize these lovely tea towels using MasterWorks II. These are great for a guest bathroom or to give as a gift. Personalizing your towels adds a special
More informationAmazing Designs Apps Instruction Manual
Amazing Designs Apps Instruction Manual Amazing Designs Apps is a new embroidery software system from Amazing Designs that contains multiple features, in different toolpacks that are activated separately.
More informationPacesetter BES Lettering 2 Instruction Manual
Pacesetter BES Lettering 2 ii Pacesetter BES Lettering 2 Copyright Copyright 2011 Pulse Microsystems Ltd. All rights reserved. This instruction manual and software are copyrighted by the developer of the
More informationPacesetter Simply Appliqué Instruction Manual
Pacesetter Simply Appliqué ii Pacesetter Simply Appliqué Copyright Copyright 2015 Pulse Microsystems Ltd. All rights reserved. This instruction manual and software are copyrighted by the developer of the
More informationA QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE)
A QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE) Lesson overview In this interactive demonstration of Adobe Illustrator CC (2018 release), you ll get an overview of the main features of the application.
More informationAdding Objects Creating Shapes Adding. Text Printing and Exporting Getting Started Creating a. Creating Shapes Adding Text Printing and Exporting
Getting Started Creating a Workspace Pages, Masters and Guides Adding Objects Creating Shapes Adding Text Printing and Exporting Getting Started Creating a Workspace Pages, Masters and Guides Adding Objects
More informationCreate ruler guides. Create a ruler guide
Create ruler guides Ruler guides are different from grids in that they can be positioned freely on a page or on a pasteboard. You can create two kinds of ruler guides: page guides, which appear only on
More informationUSER GUID E EASY COFFEE-COZY
USER GUIDE EASY COFFEE-COZY COPYRIGHT Copyright 2018. Wilcom Pty Ltd, Wilcom International Pty Ltd. All Rights reserved. No parts of this publication or the accompanying software may be copied or distributed,
More informationDesigner Reference 1
Designer Reference 1 Table of Contents USE OF THE DESIGNER...4 KEYBOARD SHORTCUTS...5 Shortcuts...5 Keyboard Hints...5 MENUS...7 File Menu...7 Edit Menu...8 Favorites Menu...9 Document Menu...10 Item Menu...12
More informationMicrosoft Office Publisher
Microsoft Office 2007- Publisher Opening Microsoft Publisher Using the Start Menu, click on All Programs and navigate to the Microsoft Office folder. Click on Microsoft Office Publisher 2007. Choosing
More informationLinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8:
LinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8: After you install LinkMotion software and set up all settings launch CorelDraw software. Important notes: Solustan s LinkMotion driver
More informationXyron Wishblade Software Manual (Mac)
Xyron Wishblade Software Manual (Mac) Provided By http://www.mybinding.com http://www.mybindingblog.com Xyron Wishblade Create & Cut Software Manual Section 1 Getting Started with Tool Bars 2 Standard
More informationAdobe InDesign CS6 Tutorial
Adobe InDesign CS6 Tutorial Adobe InDesign CS6 is a page-layout software that takes print publishing and page design beyond current boundaries. InDesign is a desktop publishing program that incorporates
More informationBERNINA V7.0T Update Release Notes
BERNINA V7.0T Update Release Notes 25 November 2015 This document contains notes on the BERNINA V7.0T Update. The Update is intended for installation with any released version (already installed) of BERNINA
More information4. The Utilities tab also contains the Registration, Dongle Activation, and Smart Update links which take you to the Registration Database online.
Premier+ Configure Page 1 Customize your Personal Settings 1. Open Premier+ Configure from the Premier+ Embroidery desktop icon or from the Start Menu/Premier+ Embroidery System program folder. Utilities
More informationWatermelon Time Banner
Watermelon Time Banner Signal the arrival of summer with this festive watermelon banner! This easy-tocreate banner is perfect for picnics, Fourth of July parties, or to just celebrate all summer long!
More informationExercise III: Creating a Logo with Illustrator CS6
Exercise III: Creating a Logo with Illustrator CS6 Project 1: Creating Logos with the Shape Tools Now that we have some experience with Illustrator s tools, let s expand our goal to create a logo, web
More informationIntroduction to Microsoft Word 2008
1. Launch Microsoft Word icon in Applications > Microsoft Office 2008 (or on the Dock). 2. When the Project Gallery opens, view some of the available Word templates by clicking to expand the Groups, and
More informationSETTING UP A. chapter
1-4283-1960-3_03_Rev2.qxd 5/18/07 8:24 PM Page 1 chapter 3 SETTING UP A DOCUMENT 1. Create a new document. 2. Create master pages. 3. Apply master pages to document pages. 4. Place text and thread text.
More informationInDesign Tools Overview
InDesign Tools Overview REFERENCE If your palettes aren t visible you can activate them by selecting: Window > Tools Transform Color Tool Box A Use the selection tool to select, move, and resize objects.
More informationHappy Haunting Halloween
Happy Haunting Halloween Created with 5D Embroidery Extra Software By Debra Bohn Try out the ExpressDesign Wizard options in 5D Embroidery Extra software as you create your own unique Halloween design
More informationSIMPLE TEXT LAYOUT FOR COREL DRAW. When you start Corel Draw, you will see the following welcome screen.
SIMPLE TEXT LAYOUT FOR COREL DRAW When you start Corel Draw, you will see the following welcome screen. A. Start a new job by left clicking New Graphic. B. Place your mouse cursor over the page width box.
More informationXyron Wishblade Software Manual (PC)
Xyron Wishblade Software Manual (PC) Provided By http://www.mybinding.com http://www.mybindingblog.com Xyron Wishblade Create & Cut Software Manual Section 1 Getting Started with Tool Bars 2 Standard Tool
More informationChristmas Tray. Created by: Diane Kron, Embroidery and Software Project Manager. Baby Lock Project: Christmas Tray Page 1 of 5
Christmas Tray Merging designs together can take you on a Christmas adventure that is sure to get you in the Christmas spirit while utilizing the Palette 9.0 and the Enterprise 10- needle embroidery machine.
More informationSweet Dreams Pajamas
Sweet Dreams Pajamas With so many 18 dolls delivered under the Christmas tree this year, all little girls will need a wardrobe for their new little one. This project will create her pajamas. MasterWorks
More informationAdobe Illustrator CC 2018 Tutorial
Adobe Illustrator CC 2018 Tutorial GETTING STARTED Adobe Illustrator CC is an illustration program that can be used for print, multimedia and online graphics. Whether you plan to design or illustrate multimedia
More informationCome Celebrate With Me
Come Celebrate With Me Bring out these festive placemats and napkins when planning a special birthday. MasterWorks Lite and its easy to use functionality are sure to add a fun personality to your birthday
More informationEDITING. 3. Click OK. Remove/Add Stitches to a Design (Global Scale Factors) 1. Click on the Tools down Menu. 2. Select Scale Factors.
EDITING Change Properties for the Entire Design 1. Right click on the design name in the Project Tab. Choose Properties from the drop-down menu. Or double click on the Design name. 2. All Elements will
More informationIntroducing Gupta Report Builder
Business Reporting Chapter 1 Introducing Gupta Report Builder You can use Report Builder to design reports. This chapter describes: Our approach to building reports. Some of the reports you can build.
More informationGROUP CANVAS USER SIDE FUNCTIONS
Group Canvas V5.0 17 GROUP CANVAS USER SIDE FUNCTIONS INTRODUCTION Once the template is available on the user side there are a number of functions that the users have access to. This section of the manual
More informationGuide to WB Annotations
Guide to WB Annotations 04 May 2016 Annotations are a powerful new feature added to Workbench v1.2.0 (Released May 2016) for placing text and symbols within wb_view tabs and windows. They enable generation
More informationHow to draw and create shapes
Adobe Flash Professional Guide How to draw and create shapes You can add artwork to your Adobe Flash Professional documents in two ways: You can import images or draw original artwork in Flash by using
More informationVHSE - COMPUTERISED OFFICE MANAGEMENT MODULE III - Communication and Publishing Art - PageMaker
INTRODUCTION : It is one Adobe PageMaker 7.0 software is the ideal page layout program for business, education, and small- and home-office professionals who want to create high-quality publications such
More informationTutorials. Lesson 3 Work with Text
In this lesson you will learn how to: Add a border and shadow to the title. Add a block of freeform text. Customize freeform text. Tutorials Display dates with symbols. Annotate a symbol using symbol text.
More informationDecorating the Christmas Tree with Generations Version 1.4 By Bernadette Griffith, Educational Director, Generations Software
Decorating the Christmas Tree with Generations Version 1.4 By Bernadette Griffith, Educational Director, Generations Software The holiday season always brings out the home decorator in us all. Creating
More information2 SELECTING AND ALIGNING
2 SELECTING AND ALIGNING Lesson overview In this lesson, you ll learn how to do the following: Differentiate between the various selection tools and employ different selection techniques. Recognize Smart
More informationembroideryarts a division of INTARSIA ARTS
embroideryarts a division of INTARSIA ARTS Program Title: Bernina artista Version: 3.1 General Overview This tutorial will focus on creating a monogram design using Monogram fonts that were not included
More informationSolidWorks Intro Part 1b
SolidWorks Intro Part 1b Dave Touretzky and Susan Finger 1. Create a new part We ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select File New Templates IPSpart If the SolidWorks
More informationGraphWorX64 Productivity Tips
Description: Overview of the most important productivity tools in GraphWorX64 General Requirement: Basic knowledge of GraphWorX64. Introduction GraphWorX64 has a very powerful development environment in
More informationUser Manual Version 1.1 January 2015
User Manual Version 1.1 January 2015 - 2 / 112 - V1.1 Variegator... 7 Variegator Features... 7 1. Variable elements... 7 2. Static elements... 7 3. Element Manipulation... 7 4. Document Formats... 7 5.
More informationSMART Meeting Pro 4.2 personal license USER S GUIDE
smarttech.com/docfeedback/170973 SMART Meeting Pro 4.2 personal license USER S GUIDE Product registration If you register your SMART product, we ll notify you of new features and software upgrades. Register
More informationWhat is Publisher, anyway?
What is Publisher, anyway? Microsoft Publisher designed for users who need to create and personalize publications such as marketing materials, business stationery, signage, newsletters and other items
More informationMS Publisher County of Henrico Public Libraries
MS Publisher 2013 I. About Publisher A. What is it? Publisher is a desktop publishing program that assists you in designing and producing professional documents that combine text, graphics, illustrations,
More informationCorel Draw 11. What is Vector Graphics?
Corel Draw 11 Corel Draw is a vector based drawing that program that makes it easy to create professional artwork from logos to intricate technical illustrations. Corel Draw 11's enhanced text handling
More informationWindow Designer. Opening Screen: When you start Window Designer, you will see the Opening Screen. Here you will be choosing from 4 options:
Window Designer Opening Screen: When you start Window Designer, you will see the Opening Screen. Here you will be choosing from 4 options: New Design: Use this option when no pre-built templates are available
More informationExploring the Workspace
Exploring the Workspace The illustration above shows a typical Create and Cut screen when first loading the software. See the coordinating sections below for an explanation of each shortcut button. Design
More informationPoster-making 101 for 1 PowerPoint slide
Poster-making 101 for 1 PowerPoint slide Essential information for preparing a poster for the poster printer 1. Poster size: You will be creating a single large slide in PowerPoint. 2. Before adding any
More informationIntroduction To Inkscape Creating Custom Graphics For Websites, Displays & Lessons
Introduction To Inkscape Creating Custom Graphics For Websites, Displays & Lessons The Inkscape Program Inkscape is a free, but very powerful vector graphics program. Available for all computer formats
More informationKrita Vector Tools
Krita 2.9 05 Vector Tools In this chapter we will look at each of the vector tools. Vector tools in Krita, at least for now, are complementary tools for digital painting. They can be useful to draw clean
More informationPremier+ Family Tree Wizard and Premier+ Family Tree
Page 1 Premier+ Family Tree Wizard and Premier+ Family Tree Work through the Family Tree Wizard in Premier+ Ultra. Then Quick Link to Premier+ Family Tree and see how much more is available to make your
More information5. Canvas overview. Cricut Design Space User Manual. Design Panel
5. Canvas overview The Canvas is where you ll design your projects. On the Canvas, you can add and edit projects, images, and text. You can also set a project template, which doesn t cut but helps you
More informationFaculty Development Seminar Series Constructing Posters in PowerPoint 2003 Using a Template
2008-2009 Faculty Development Seminar Series Constructing Posters in PowerPoint 2003 Using a Template Office of Medical Education Research and Development Michigan State University College of Human Medicine
More informationWord 3 Microsoft Word 2013
Word 3 Microsoft Word 2013 Mercer County Library System Brian M. Hughes, County Executive Action Technique 1. Insert a Text Box 1. Click the Insert tab on the Ribbon. 2. Then click on Text Box in the Text
More informationEDITING SHAPES. Lesson overview
3 CREATING AND EDITING SHAPES Lesson overview In this lesson, you ll learn how to do the following: Create a document with multiple artboards. Use tools and commands to create basic shapes. Work with drawing
More informationAnimating the Page IN THIS CHAPTER. Timelines and Frames
e r ch02.fm Page 41 Friday, September 17, 1999 10:45 AM c h a p t 2 Animating the Page IN THIS CHAPTER Timelines and Frames Movement Tweening Shape Tweening Fading Recap Advanced Projects You have totally
More informationSolidWorks 2½D Parts
SolidWorks 2½D Parts IDeATe Laser Micro Part 1b Dave Touretzky and Susan Finger 1. Create a new part In this lab, you ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select
More informationembroideryarts a division of INTARSIA ARTS
embroideryarts a division of INTARSIA ARTS Program Title: HUSQVARNA VIKING VIP CUSTOMIZING PLUS Version: 6.0 General Overview One of the functions of the VIP Customizing Plus program is to combine individual
More informationAdobe Illustrator. Quick Start Guide
Adobe Illustrator Quick Start Guide 1 In this guide we will cover the basics of setting up an Illustrator file for use with the laser cutter in the InnovationStudio. We will also cover the creation of
More informationGIMP WEB 2.0 BUTTONS
GIMP WEB 2.0 BUTTONS Web 2.0 Navigation: Bar with Icons WEB 2.0 NAVIGATION: NAVIGATION BAR WITH ICONS This navigation bar will be designed with four clickable text links and icon links. In the Menus section,
More informationEmbird Manual (part 3)
Embird Manual (part 3) 2004 by Ladislav Balara, Embird 1st edition October 27, 2004 All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means
More informationEnd User Guide. 2.1 Getting Started Toolbar Right-click Contextual Menu Navigation Panels... 2
TABLE OF CONTENTS 1 OVERVIEW...1 2 WEB VIEWER DEMO ON DESKTOP...1 2.1 Getting Started... 1 2.1.1 Toolbar... 1 2.1.2 Right-click Contextual Menu... 2 2.1.3 Navigation Panels... 2 2.1.4 Floating Toolbar...
More informationUSER GUIDE QUICK REFERENCE
USER GUIDE QUICK REFERENCE CONTENTS Menus... 1 File menu... 1 Edit menu... 2 View menu... 3 Arrange menu... 4 Machine menu... 4 Design Settings menu... 4 Software Settings menu... 5 Window menu... 5 Toolbars...
More informationPLAY VIDEO. Fences can be any shape from a simple rectangle to a multisided polygon, even a circle.
Chapter Eight Groups PLAY VIDEO INTRODUCTION There will be times when you need to perform the same operation on several elements. Although this can be done by repeating the operation for each individual
More information1. Move your mouse to the location you wish text to appear in the document. 2. Click the mouse. The insertion point appears.
Word 2010 Text Basics Introduction Page 1 It is important to know how to perform basic tasks with text when working in a word processing application. In this lesson you will learn the basics of working
More informationGIMP WEB 2.0 ICONS. GIMP is all about IT (Images and Text) OPEN GIMP
GIMP WEB 2.0 ICONS WEB 2.0 ICONS: STICKY NOTE Web 2.0 Icons: Sticky Note GIMP is all about IT (Images and Text) OPEN GIMP Step 1: To begin a new GIMP project, from the Menu Bar, select File New. At the
More informationAdobe Illustrator CS Design Professional GETTING STARTED WITH ILLUSTRATOR
Adobe Illustrator CS Design Professional GETTING STARTED WITH ILLUSTRATOR Chapter Lessons Create a new document Explore the Illustrator window Create basic shapes Apply fill and stroke colors to objects
More informationFig. A. Fig. B. Fig. 1. Fig. 2. Fig. 3 Fig. 4
Create A Spinning Logo Tutorial. Bob Taylor 2009 To do this you will need two programs from Xara: Xara Xtreme (or Xtreme Pro) and Xara 3D They are available from: http://www.xara.com. Xtreme is available
More information1 General Principles. General Principles. In this chapter 1-1
1 General Principles In this chapter 1 General Principles 1.1 User Interface 1.2 Title bar 1.3 Menu bar 1.4 Standard Toolbar 1.5 The drawing area 1.6 Component tabs 1.7 Status Bar 1.8 Manipulating Components
More informationCS Multimedia and Communications REMEMBER TO BRING YOUR MEMORY STICK TO EVERY LAB! Lab 02: Introduction to Photoshop Part 1
CS 1033 Multimedia and Communications REMEMBER TO BRING YOUR MEMORY STICK TO EVERY LAB! Lab 02: Introduction to Photoshop Part 1 Upon completion of this lab, you should be able to: Open, create new, save
More informationParashar Technologies PageMaker 7.0
PageMaker 7.0 INTRODUCTION PageMaker 7.0 is one of the best and popular Desktop Publishing Designing Program developed by Adobe Corporation in USA. It is specially used in page designing. Today is popular
More informationCraft-N-Cut User s Guide
Craft-N-Cut User s Guide COPYRIGHT Copyright 2017 Pulse Microsystems, Inc. All rights reserved. This User s Guide and the Craft-N-Cut software are copyrighted by the developer of the software, Pulse Microsystems,
More information