AVK Butterfly valves series 756
|
|
|
- Lesley Spencer
- 6 years ago
- Views:
Transcription
1 1 Valve with gearbox [IP 67] and hand wheel Standard epoxy/epoxy PN 10/16 butterfly valves including gearbox and handwheel for installation in chamber please order: Integral seat Stainless steel seat xxxx - 104, for DN PN xxxx DN PN xxxx - 114, for DN PN xxxx DN PN 16 Valve size Handwheel Turns to open Free running Min. rupture max. closing torque(nm) rev. torque (Nm) torque (Nm) (EN1074) DN , DN , DN300 *80/**100 *8,5/**9,5 7 *160/**200 DN350 *80/**100 *8,5/**9,5 7 *160/**200 DN , DN *9,5/** DN *9,5/** DN600 *170/**120 *14/**27 7 *340/**240 DN *27/** DN *27/** DN *54** DN *61/** DN *82/** *PN10/**PN16
2 2 Valve with gearbox [IP 68], extension and street cover Standard epoxy/epoxy PN 10/16 butterfly valve including gearbox IP 68, AVK telescopic extension spindle and universal street cover. For installation directly in the ground without chamber, please order: Integral seat Stainless steel seat xxxx , for DN PN xxxx , DN PN xxxx , for DN PN xxxx , DN PN16 Extension spindle: 04 - xxx , length , for valves DN xxx 04 - xxx , length , for valves DN xxx 04 - xxx , length , for valves DN xxx 04 - xxx , length , for valves DN xxx xxx = 400 for DN PN10/16, DN600 PN10 xxx = 600 for DN600 PN16, DN PN10/16 Street cover: , street cover with lid , plastic support tile , plastic fixations plugs for support plate to connect with universal street cover. Optional: Loose handwheel with adaptor (KIT) for connection with in chamber: : Ø360mm CTC, DN PN10/16 and DN600 PN10. Butterfly : Ø600mm CTC, DN600 PN16. Butterfly DN : Always including Ø700 mm handwheel.
![3 Valve with gearbox [IP67 or IP68], extension bar #25mm and handwheel Standard epoxy/epoxy PN 10/16 butterfly valve including gearbox and handwheel, extension carried out with steel bar #25 mm](/docs-images/74/70025104/images/3-2.jpg "supplied by customer.")
3 3 Valve with gearbox [IP67 or IP68], extension bar #25mm and handwheel Standard epoxy/epoxy PN 10/16 butterfly valve including gearbox and handwheel, extension carried out with steel bar #25 mm supplied by customer. For installation in chamber and operated by handwheel above ground, please order: Integral seat / gear IP67 Stainless steel seat / gear IP xxxx - 104, for DN PN xxxx DN PN xxxx - 114, for DN PN xxxx DN PN xxxx , DN PN xxxx , DN PN xxxx , DN PN xxxx , DN PN16 Adaptor for gearbox to #25 mm: : For DN PN10/16 mounted to standard IP67 gearbox or IP68 gearbox. Galvanized rod #25 mm: To be cold drawn steel grade 37, or grade 52. Supplied by customer, not by AVK. Adaptor for handwheel: , for connecting handwheel to galvanized rod and handwheel. Cast handwheel: : Handwheel, Ø360 (incl. A2 Hex bolt and washer) for DN CTC PN10/16, DN600 PN : Handwheel, Ø640 (incl. A2 Hex bolt and washer) for DN 600 PN16, DN CTC PN10/16 Cast handwheel handwheel side
4 4 Valve with gearbox [IP67 or IP68], with T-key operation #30mm AVK France execution Standard epoxy/epoxy PN 10/16 butterfly valve including gearbox and handwheel, extension carried out with steel bar #25 mm supplied by customer. For installation in chamber and operated by handwheel above ground, please order: Integral seat / gear IP67 Stainless steel seat / gear IP xxxx - 104, for DN PN xxxx DN PN xxxx - 114, for DN PN xxxx DN PN xxxx , for DN PN xxxx , for DN PN xxxx , for DN PN xxxx , for DN PN16 Adaptor for gearbox to #30 mm, for T-key operation: : Stem cap, # 30mm outside For DN PN10/16 mounted to standard IP67 gearbox or to IP68 gearbox. T-key: To be purchased locally Handwheel or T-key
![5 Valve with gearbox [IP 67 or IP 68], extension bar #25mm and electric actuator Standard epox/epox PN 10/16 butterfly valve including gearbox, extension carried out with steel bar #25 mm supplied by](/docs-images/74/70025104/images/5-0.jpg "customer and operated by electric actuator.")
5 5 Valve with gearbox [IP 67 or IP 68], extension bar #25mm and electric actuator Standard epox/epox PN 10/16 butterfly valve including gearbox, extension carried out with steel bar #25 mm supplied by customer and operated by electric actuator. For installation in chamber and operated by actuator above ground, please order: Integral seat / gear IP67 Stainless steel seat / gear IP xxxx - 104, for DN PN xxxx for DN PN xxxx - 114, for DN PN xxxx for DN PN xxxx , for DN PN xxxx , for DN PN xxxx , for DN PN xxxx , for DN PN16 Adaptor for gearbox to #25 mm: : For DN PN10/16 mounted to IP67 gearbox or to IP68 gearbox. Galvanized rod #25 mm: To be cold drawn steel grade 37, or grade 52. Supplied by customer, not by AVK. Flange pipe support: To be supplied by customer, not by AVK, with one flange-end according to ISO Actuator AUMA: RPM ISO 5210 AUMA SA 07.6 PN10/16 DN ,6 F10 Open/Close torque set to 60 Nm AUMA SA 10.2 PN10/16 DN ,6 F10 Open/Close torque set to 100 Nm PN16 DN F10 Open/Close torque set to 100 Nm PN10/16 DN F10 Open/Close torque set to 120 Nm AUMA SA 14.2 PN10/16 DN ,6 F14 Open/Close torque set to 160 Nm PN10 DN F14 Open/Close torque set to 150 Nm For all actuators please note: Power supply according to customer, all actuators must be supplied with connection B4 special order with inside # 25 mm (important only for this configuration). Recommended RPM are based on S15 actuators other RPM s on request.. Electric actuator B4 adapter # 25 inside This valve installation is only for ON/OFF duty. This configuration may have a reduced lifetime compared to the configuration on page 6 as it is based on a gearbox for handwheel operation.
6 6 Valve with ISO flange gearbox [IP67] ready for electric actuator Standard epox/epox PN 10/16 butterfly valve including ISO flange gearbox and operated by electric actuator. For installation in chamber, and operated by actuator directly on the valve, please order: Integral seat Stainless steel seat xxxx , for DN PN xxxx , for DN PN xxxx , for DN PN xxxx , for DN PN16 Actuator AUMA: DN200 PN10/16 AUMA SA F10, 5,6 RPM, Connector B4-Ø15 / keyway Open/Close torque 30 Nm DN250 PN10 AUMA SA F10, 5,6 RPM, Connector B4-Ø15 / keyway Open/Close torque 30 Nm DN250 PN16 AUMA SA F10, 5,6 RPM, Connector B4-Ø15 / keyway Open/Close torque 60 Nm DN300 PN10 AUMA SA F10, 5,6 RPM, Connector B4-Ø15 / keyway Open/Close torque 60 Nm DN 300 PN16 AUMA SA F10, 5,6 RPM, Connector B4-Ø17 / keyway Open/Close torque 60 Nm DN350 PN10/16 AUMA SA F10, 5,6 RPM Connector B4-Ø17 / keyway Open/Close torque 60 Nm DN 400 PN10/16 AUMA SA F10, 5,6 RPM, Connector B4-Ø17 / keyway Open/Close torque 60 Nm DN 450/500 PN10 AUMA SA F10, 5,6 RPM, Connector B3-Ø20 / keyway Open/Close torque 30 Nm DN 450/500 PN16 AUMA SA F10, 5,6 RPM, Connector B3-Ø20 / keyway Open/Close torque 60 Nm DN600 PN10 AUMA SA F10, 5,6 RPM, Connector B3-Ø20 / keyway Open/Close torque 60 Nm DN600 PN16 AUMA SA F10, 5,6 RPM, Connector B3-Ø20 / keyway Open/Close torque 60 Nm DN PN10 AUMA SA F10, 22 RPM, Connector B3-Ø20 / keyway Open/Close torque 60 Nm DN PN16 AUMA SA F10, 22 RPM, Connector B3-Ø20 / keyway Open/Close torque 120 Nm DN900 PN10/16 AUMA SA F10, 22 RPM, Connector B3-Ø20 / keyway Open/Close torque 120 Nm DN1000 PN10 AUMA SA F10, 22 RPM, Connector B3-Ø20 / keyway Open/Close torque 120 Nm DN1000 PN16 AUMA SA F10, 22 RPM, Connector B3-Ø20 / keyway Open/Close torque 60 Nm DN1200 PN10 AUMA SA F10, 22 RPM, Connector B3-Ø20 / keyway Open/Close torque 60 Nm DN1200 PN16 AUMA SA F10, 22 RPM, Connector B3-Ø20 / keyway Open/Close torque 120 Nm For all actuators please note: Power supply according to customer, all actuators are to be supplied with connection like above (important only for this configuration). Recommended RPM are based on S15 actuators other RPM s on request. Electric actuator This valve installation is only for ON/OFF duty.
7 7 Valve with gearbox [IP 67 or IP 68] and headstock Standard epox/epox PN 10/16 butterfly valve including gearbox, extension carried out with steel bar #25 mm supplied by customer and operated by headstock with flexible joint. For installation in chamber or underground by headstock above ground, please order: Integral seat / gear IP67 Stainless steel seat / gear IP xxxx - 104, for DN PN xxxx for DN PN xxxx - 114, for DN PN xxxx for DN PN xxxx , for DN PN xxxx , for DN PN xxxx , for DN PN xxxx , for DN PN16 Adaptor for gearbox to #25 mm: : For DN PN10/16 mounted to IP67gearbox or to IP68 gearbox. Headstock with flexible joint: Pricing and sizes on request. Instead of a handwheel, an electric actuator can be fitted. When requiring prices, please specify the following Distance between centreline of valve shaft to top floor level (the flex joint is extendable) Handwheel or actuator standard is handwheel Headstock Flexible joint This valve installation is only for ON/OFF duty.
Mechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
Item 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
Actuator LA31. Data sheet LINAK.COM/DESKLINE
Actuator LA31 Data sheet LINAK.COM/DESKLINE LA31 The LA31 actuator is a very quiet and powerful linear actuator desigend for a variety of desk applications ranging from kitchen applications to industrial
Multi-Axis Connection System for Linear Drive Systems Series OSP-E
Multi-Axis Connection System for Linear Drive Systems Series -E Contents Description Page Overview 21-24 Adapter plates Dimensions/Order Instructions 25-33 Intermediate Drive Shafts 34 Dimensions/Order
1 AM-167/202/242/282/322 Parts Manual. Table Of Contents
AM-167/202/242/282/322 Parts Manual Table Of Contents Mower Beam with Bearings...2 Mower Beam with Bearings...4 Cutting Discs...6 Main Gearbox...8 V-Belt Pulley...10 Headstock...12 Carrier Beam...14 V-Belt
Data Sheet for Angle Sensors
Shaft encoder for variable applications Parametrisable via DIP switches Angle 0..20 to 0..360 free configurable Sense of rotation selectable (CW / CCW) Supply voltage: 5 V / 3.3 V (switchable), 24 V Analog
GPX 1250 Gas Piston Pump
GPX 0 Gas Piston Pump Owner s Manual Model Number 0000 SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com Printed in the U. S.
Available with actuator function: POWER OPEN - POWER CLOSE FAILSAFE MODULATING FAILSAFE MODULATING. Overview
Feature rich J+J multi-voltage smart electric actuator with LED status light and function conversion kits. J3C-S20 Overview The J3C-S20 multi-voltage smart electric valve actuator from the European electric
Wafer Type Butterfly Valve
Rev.B Wafer Type Butterfly Valve Type Summary Butterfly valve actuator type Actuator Type Description Rated Output Force Supply* Control/ Feedback Signal Running Time Weight kg TBV-50-X.V Proportional
C200 VALVE WITH UM ELECTRIC ACTUATOR
FEATURES The C200+UM Ball-valves guarantee the function of automatic shut-off of pipes made of PVC-U, PEHD, PP or PVDF. This PN10/16 pressure class valve is used to isolate low-pressure water, acid or
USER MANUAL. Electrical Part-turn Valve Actuators. Rev 5.3 / March 2018 EQS ID 1193 QT 250 and QT Ex Actuator
USER MANUAL Electrical Part-turn Valve Actuators Rev 5.3 / March 2018 EQS ID 1193 QT 250 and QT800 2.4 Ex Actuator Revision 5.3 Page 1 of 26 TABLE OF CONTENTS 1 INTRODUCTION... 3 1.1 VALVE INTERFACE...
1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A.
LUG TYPE BUTTERFLY VALVE -A TECHNICAL DATA Nominal diameter: da ( ) - da ( ) (SDR ) da ( ) - da ( ) (SDR (SDR / SDR, / SDR ) Face-to-face: EN 55 Series (DIN 32 T3 K1) ISO 5 Series API 09 Table 1 BS 55
ELECTRIC ACTUATORS Innovations for SGC part-turn actuators and SVC valve actuators
ELECTRIC ACTUATORS Innovations for SGC part-turn actuators and SVC valve actuators SGC PART-TURN ACTUATORS 2 SVC GLOBE VALVE ACTUATORS 3 NEWS ON COMPACT ACTUATORS 3 SVC globe valve actuators with enhanced
Mounting set for electropneumatical positioner type APIS
Mounting set for electropneumatical positioner type APIS a) b) Fig.1. Positioner type APIS-1X0-... with mounting kit APIS-A0000-SS(SO) (positioner mounted on column type actuator P or R by Polna Ltd company).
AB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO
Quality BF LEVER OPERTED GERBOX OPERTED FETURES Designed and manufactured to S79. Vulcanized liner resists deformation. Rated to 00kpa from 0mm up to 00mm and 000kpa from 700mm up to 00mm. Stainless steel
72 Heavy Duty Dual Trim Deck Parts Manual
2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter
NEOTECHA. PFA lined Ball Valves - Models SNB and SNC
NEOTECHA PFA lined stainless steel ball valve with short face to face and well proven trunnion mounted design for use in pharmaceutical and bio-engineering industries Features PFA lining offers highest
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
Ball valve Metal. Sectional view. * see information on working medium on page PED/97/23/EC Category III Module H TA-LUFT
all valve Metal Construction GEMÜ is a 2/2-way stainless steel ball valve with top flange EN ISO 5211 in sizes DN 15 to 100. It has a low maintenance electric actuator with a powerful DC motor. The reduction
Tykoflex cold method. A safe, simple and proven cold method TYKOFLEX COLD METHOD
Tykoflex cold method A safe, simple and proven cold method TYKOFLEX COLD METHOD Our new cold compression method Tykoflex cold compression method has bushings for micro cables in the size range of Ø.8-9.5
ELECTRIC ACTUATORS Compact devices for the automation of globe valves, ball valves and butterfl y valves
ELECTRIC ACTUATORS Compact devices for the automation of globe valves, ball valves and butterfl y valves SGC PART-TURN ACTUATORS 2 SVC GLOBE VALVE ACTUATORS 3 SGC part-turn actuators and SVC globe valve
Data is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
GEMÜ 723 Motorized ball valve
Motorized ball valve Features High flow rates Low weight Choice of various body materials and connection types Available as shut off or control valve / and /-way versions available The / and/or /-way ball
Data Sheet for Angle Sensors
ETS25 - R ETS25 - F Serial micro controller interface (SER) or Serial Peripheral Interface (SPI) available Versatile electrical connections on demand: Solder- or clamping terminals, flat ribbon or round
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
DirectCommand Installation Case/Flexi-Coil/New Holland Air Cart Kit (Variable Rate Electro Hydraulic Systems) Ag Leader Technology
Part Name/Description Part Number Quantity Flexi-Coil Air Seeder Kit 4100889 1 Generic Cable Installation Kit 2000901-1 1 Hardware Kit Large Module 2001354-1 1 Deutsch Dust Plug 8-pin 2002899-8 1 Quick
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
MME/MOE Intelligent Electric Actuators About Ontrac
About Ontrac 1 1 Specifications Voltage supply Duty mode Motor control 3-phase AC, 380/460±10%, 50/60Hz±5%; 1-phase AC, 220±10%, 50/60Hz±5%; On-off (MOE series,) a complete stroke, S2-15 min; Modulating
Ø 58 mm, depth 48 mm Shaft dimension. Hollow Ø 15 mm, solid Ø 6 or 10 mm Shaft loading (axial and radial)
ABSOLUTE ENCODERS AMT58 SSI Multi-turn Line Standard dimension Ø58mm Hollow or solid shaft Very high resolution Very high accuracy APPLICATIONS -Motion control -Automated machinery -Length measurement
Electrical Position Indicator
Distributed by: Tel: 90.77.9000 Toll Free:.800.8.78 www.tricanada.com Electrical Position Indicator with microswitches Construction The GEMÜ 0 electrical position indicator has one or two mechanical microswitches.
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
Level limit switch Series RF 3000 Selection list. Overview 2
Table of content Overview 2 Page Applications 4 ------------------------------------------------------------------------------------------------------------- RF 3100 6 Standard version -------------------------------------------------------------------------------------------------------------
this harness plugs into the back of the Digital Control Center and has individual sets of wires for each electrical component in the hopper shell
54076 Auger end cap used to hold the auger and the auger motor in place $ 10.00 $ 6.00 54077 Auger Lock collar used to attach the auger shaft to the gearbox shaft $ 10.00 $ 6.00 50102 Auger motor - 2 rpm
Balancing valve PN 16 and PN 25 DN
STAF, STAF-SG Balancing valve PN and PN DN 0-00 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing
Available with actuator function: POWER OPEN - POWER CLOSE FAILSAFE MODULATING FAILSAFE MODULATING. Overview
59in.lbs Smart Electric Valve Actuator Feature rich multi-voltage smart electric actuator with LED status light and function conversion kits. JC-S5 +DPS +BSR Overview The JC-S5 multi-voltage smart electric
HANDLEBAR AND CONTROLS
HANDLEBAR AND CONTROLS Model 80 R, 80 RS, 80 RSE, 80 RSW, 80 BBC, 00 C 80 BBC 80 R, 80 RS, 80 RSE, 80 RSW, 00 C 8 8 0 0 8 0 8 0 0 8 PM00 0 00 00 0 Engine Bail Weldment(80 R, 80 RS, 80 RSE, 80 RSW, 00 C)
STAF, STAF-SG, STAF-R, STAG
STAF, STAFSG, STAFR, STAG Balancing valves 0. Technical description Applications: STAF, STAFSG, STAG: Heating and cooling systems STAFR: Heating and cooling systems Tapwater systems Functions: Balancing
M3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems
MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short
2-PORT SEAT VALVES PN16 WITH FLANGED CONNECTIONS STAZ-16, STBZ-16, STCZ-52 DATASHEET
-PORT SEAT VALVES PN WITH FLANGED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In boiler, district heating and refrigeration plants, cooling towers, heating groups, in ventilation and air-handling units as
flamingo Exploded views / Part lists Rev. date (June 2009) Tel: Fax: Web:
flamingo Exploded views / Part lists Rev. date (June 2009) Contents Flamingo size 1+2+3+4... 3 Seat... 5 Frame... 7 Footrest... 10 Arm support, back sides, pan with holder, suction cups and swing away
Available with actuator function: POWER OPEN - POWER CLOSE FAILSAFE MODULATING FAILSAFE MODULATING. Overview
Feature rich multi-voltage smart electric actuator with LED status light and function conversion kits. JC-S5 +DPS Overview The JC-S5 multi-voltage smart electric valve actuator offers an impressive list
Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
Accessories. Page 1/
Table of contents Page Programming software Ezturn 302 SSI-Display Type 570 303 Multifunction display Type 571 304 Fixing components for encoders Flange adapters, square, round, angle 305 Fastening eccentrics
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
MPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
FxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2
BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.
Data sheet: Wilo-Stratos 40/1-8
Data sheet: Wilo-Stratos 4/1-8 Pump curves 1 2 v 3 4 DN4 m/s,5 1, 1,5 2, 2,5 DN5 H/m Wilo-Stratos 4/1-8 p/kpa Wilo-Stratos 5/1-8 48 1 /min - 1 V 1~23 V - DN 4 / DN 5 8 8 P 1/W n= const 6 383 1 /min - 8
J3C-H20DPS 25Nm Smart Electric Actuator Type: J3C Model: H20DPS
JC-H20DPS 25Nm Smart Electric Actuator Modulating Type: JC Model: H20DPS Feature rich J+J multi-voltage smart electric actuator with LED status light and function conversion kits. Overview The JC-H20DPS
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
Actionneur électrique Electric actuator Elektrische Stellantrieb Actuador eléctrico
Actionneur électrique Electric actuator Elektrische Stellantrieb Actuador eléctrico MT 5 250 Facteur de marche 50% Duty cycle Indice de protection IP68 Enclosure protection 25Nm BLUETOOTH Anticondesation
Incremental encoders to control frequency converters
Incremental encoders to control frequency converters All encoders are delivered with a 10m supply cable and suitable plug (if necessary)! 46 z deep Incremental encoders for frequency controls of the following
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with
Absolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
Encoder WDGA 58A PROFINET-IO (cov)
Encoder WDGA 58A PROFINET-IO (cov) www.wachendorff-automation.com/wdga58apnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 07.07 Manual Part# 67 Caution: Read all safety and operating instructions before using this equipment. This parts
ABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
GXT 665R Mobile Shear PARTS MANUAL
GXT 665R Mobile Shear PARTS MANUAL CONTACT INFORMATION World Headquarters Genesis Attachments 1000 Genesis Drive Superior, WI 54880 USA Toll Free: 888-SHEAR-IT (888-743-2748) Phone: 715.395.5252 Fax: 715.395.5255
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL CHAINWHEELS Page 2 Ductile Iron wheels Sprocket-Type, for use with Single Loop Cut Used to operate overhead valves from
Motorised Butterfly Valve DMK Nominal Diameter Rp 3/4 - Rp 2
Motorised Butterfly Valve DMK Nominal Diameter Rp / - Rp.0 Printed in Germany Rösler Druck Edition 0.0 Nr. 9 77 Technical description The DUNGS DMK motorised butterfly valve is an actuator without zero
M.R.P. Dt
M.R.P LIST Dt. 13.09.2013 "ZOLOTO " Bronze Globe Valve (Screwed). 1001. 8mm 10mm 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 416.00 416.00 416.00 601.00 791.00 1305.00 1723.00 2513.00 4308.00 7174.00
Encoder WDGA 58E PROFINET-IO (cov)
Encoder WDGA 58E PROFINET-IO (cov) www.wachendorff-automation.com/wdga58epnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
technical catalogue
technical catalogue www.abka.net Grills and Drainage Channels User Area Stadium drainage practice Green area and garden drainage practice Garage drainage practice Swimming pool drainage practice Kasimpasa
All prices in CHF, excl. taxes, ex works Solothurn, payment within 30 days net
Price list 2018 Standard program Magnetic holding devices Dial test indicator holder Selecting magnet Demagnetizer Holding and sticking magnets Rubber magnets Conditions: Delivery terms: All prices in
Gas Pressure Regulator HON
Gas Pressure Regulator HON 0 0.0 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS EDITION 0/07 Serving the Gas Industry Worldwide Contents page. General Remarks 3. Safety Instructions 3. Special Operating
Motorized quarter turn actuator
Motorized quarter turn actuator Construction The GEMÜ 98 motorized quarter turn actuator is a compact design. The motor and gear are combined as one unit in a plastic housing. The quarter turn actuator
This is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
13AV60KG011 Bronco (2009) Page 1 of 23 Drive System
13AV60KG011 Bronco (2009) Page 1 of 23 Drive System 13AV60KG011 Bronco (2009) Page 2 of 23 Drive System 1 17840-0637 1 /P Mounting Bracket, Trans-axle 2 925-04039 1 /P Switch, Interlock 3 17962 1 Plate,
EPX2555 Advantage Series Piston Pump
EPX Advantage Series Piston Pump Owner s Manual Do not use this equipment before reading this manual! Model Numbers: 00 Upright Cart Complete 00 Low Boy Cart Complete NOTE: This manual contains important
TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
PARTS BOOKLET
00-0-0-0 PARTS BOOKLET 0 EDITION PARTS BREAKDOWNS / INSTALLS PAGE. JACK & TONGUE. VIEWING PLATFORM. TWO SPEED -. SHIFTERS. OIL RESERVOIR -. PLANETARY 0-. DRIVELINE CONFIGURATIONS -. SLIP CLUTCH PAGES.
1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA
UG TYPE BUTTERFY VAVE Z 04-A ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T
410, 417, 423. Butterfly valve, Plastic
Butterfly valve, Plastic Construction GEMÜ 410, 417 and 423 are centric butterfly valves in nominal sizes N 15-100. The valve body is made of PVC-U, the butterfly disc is made of PVF or PP. The available
Incremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
Products Catalogue I. Mounting runners and components:
I. Mounting runners and components: 110111-R Mounting runner 40*40 mm M8 slot nut / M10 bolt length: 6.100 mm span width as per statics 110111-N 110112-R Mounting runner 40*40 mm with sideward screw channel
1/2
http://partsradar.arinet.com/scripts/empartisapi.dll?mf&app=ariens&session=27f5776d-d5a8-4417-865b-d472735c5bb5&cat=2&assem=4658&imgma 1/2 Ref # Par t # Descr iption Context Note Foot Note Min Qty UOM
Shaft Speed: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - CANopen Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm CANopen communication profile according to DS 301; Programmable according to Class 2 Resolution up to
Encoder WDGA 58F PROFINET-IO (cov)
Encoder WDGA 58F PROFINET-IO (cov) www.wachendorff-automation.com/wdga58fpnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
RSK. Wafer Type Check Valve. Construction. Features. Advantages
Wafer Type Check Valve Construction The GEMÜ wafer type check valve is available in plastic or metal and the body, disc and seal can be chosen from various materials. The valve is clamped between two flanges
HP STD 33" Cut (S/N ) Page 1 of 15 Drive Assembly
34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 1 of 15 Drive Assembly 34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 2 of 15 Drive Assembly 1 1 Engine, 8 HP, Recoil Start Order
Supported Vehicle Installations
ParaDyme Vehicle Auto Steer System Installation Manual Supported Vehicle Installations This document supports the installation of ParaDyme on the following systems. Claas 670, 730, 740, 750, 760, 770 Part
Water Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
MultiPort Ball Valves
Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort
17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 1 of 22 Deck Lift & Controls
17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 1 of 22 Deck Lift & Controls 17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 2 of 22 Deck Lift & Controls Ref # Part Number Qty S/P/F Description 1 603-04160B 1
M-2300-ZX Focus SVT Brake Conversion Kit INSTRUCTION SHEET
Please contact the Tech Hot Line for the most current instruction information (586) 468-1356!!! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION!!! OVERVIEW: This kit is designed
711, 728, 751. Ball Valve, Stainless steel Multi-port
Ball Valve, Stainless steel Multi-port Construction GEMÜ 711, 728 and 751 are 2/2-way stainless steel ball valves with top flange EN ISO 5211 in sizes 1/4 to 2 (DN 8 to DN 50). The top flange enables both
Mounting and Operating Instructions EB EN ( ) Series 3730 Type Electropneumatic Positioner. Translation of original instructions
Series 3730 Type 3730-1 Electropneumatic Positioner Old design Translation of original instructions New design Mounting and Operating Instructions EB 8384-1 EN (1300-1610) Firmware version 2.22 Edition
Universal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
Type EXAG - Profibus. Explosion Proof / Absolute. Ex d - Proof Hollow Shaft Encoder - Ø 78 mm
Explosion Proof / Absolute Type EXAG - Profibus Ex d - Proof Encoder - Ø 78 mm Hollow Bore: Ø 14 mm, Ø 16 mm and Ø 1 inch Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site
21C-64M1066 Bronco CRT Roto-Tiller (2008) Page 1 of 13 Drive System
21C-64M1066 Bronco CRT Roto-Tiller (2008) Page 1 of 13 Drive System 21C-64M1066 Bronco CRT Roto-Tiller (2008) Page 2 of 13 Drive System 1 656-04023A 1 Engine Pulley Bronco 1 656-04005A 1 /P Engine Pulley
B. AVM321S/AVM322S: 1000N Actuator with analog SUT positioner
GB Product Data Sheet 99.70.06-B AVM321S/AVM322S: 1000N Actuator with analog SUT positioner Areas of use For actuation of 2- and 3-way valves. For controllers with constant output (0...10 V / 4...20 ma)
Elektrischer Stellantrieb Typ EA 21/31/42 Electrical Actuator Unit Type EA 21/31/42. Bedienungsanleitung. Instruction Manual
Elektrischer Stellantrieb Typ EA 21/31/42 Electrical Actuator Unit Type EA 21/31/42 Bedienungsanleitung Instruction Manual English Index of content 1. Introduction... 36 General Information... 36 2. EC
Type EXME - DeviceNet
Explosion Proof - Mining / Absolute Type EXME - DeviceNet Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm DeviceNet communication protocol Resolution up to 30 bits Removable End Cap for on-site modifications
YOUR COMPLETE SOURCE FOR. Gear Reducers Couplings & Linear Mount Products. Product Range. GAM Can.
YOUR COMPLETE SOURCE FOR Gear Reducers Couplings & Product Range Linear Mount Products GAM Can. YOUR COMPLETE SOURCE FOR GEAR REDUCERS, COUPLINGS & LINEAR MOUNT PRODUCTS Product Selection Guide Gear Reducers
Cool Drawer Dual Sensor
The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer
13AN77KG011 Pony (2009) Page 1 of 21 Engine Accessories
13AN77KG011 Pony (2009) Page 1 of 21 Engine Accessories 13AN77KG011 Pony (2009) Page 2 of 21 Engine Accessories 1 683-04549-0637 1 /P Muffler Shield Assembly with Weld 2 710-0227 1 /P Screw, 8-18 x.500
MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial