SN8F5000 Starter-Kit User Manual
|
|
|
- Barnard Russell
- 6 years ago
- Views:
Transcription
1 SONiX Technology Co., Ltd. User Manual 8051-based Microcontroller
2 1 Overview of Starter Kit provides easy-development platform. It includes SN8F5000 family real chip and I/O connectors to input signal or drive device of user s application. It is a simple platform to develop application as target board not ready. The Starter-Kit can be replaced by target board, because SN8F5000 family integrates embedded ICE in-circuit debugger circuitry. 1.1 Development Environment SN8F5000 debug tool cooperate with Keil C51 which includes integrated development environment (IDE, Keil μvision), C51/A51 compliers and BL51 linker. See detailed documentation of SN8F5000 Debug Tool User Manual (download on Configurations of Circuit These configurations must be setup completely before starting Starter-Kit developing. 1. Confirm to the circuit board whether elements are complete. 2. The power source of Starter-Kit circuit is chosen from 5.0V, 3.3V or external power via jumper. 3. The power source comes from 5.0V or 3.3V which must be connect to DC 7.5V power adapter. 4. If the power source is chosen from external power, then external power source connects to EXT pin. 5. The RST pin needs to connect pull high resister to VDD when external reset is chosen to use. 6. The XIN pin and the XOUT pin need to connect crystal/resonator oscillator components when system clock is setting crystal or RTC mode. 7. The XIN pin needs to connect external clock source when system clock is setting external clock input mode. 8. The Debug Port can connect SN-LINK Adapter for emulation or download code. 9. The MCU LED will light up and SN8F5000 family chip will be connected to power when power (VDD) is switched on. Overview of Starter Kit User Manual Rev
3 2 Table of Contents 1 Overview of Starter Kit Table of Contents Revision History SN8F5708 Starter-Kit SN8F5703 Starter-Kit SN8F5702 Starter-Kit SN8F5804 Starter-Kit Table of Contents User Manual Rev
4 3 Revision History Revision Date Description 1.0 Nov 2015 First issue 1.1 Sep 2016 Add SN8F5804 Starter-Kit information. SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as components in systems intended, for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of the part. Revision History User Manual Rev
5 4 SN8F5708 Starter-Kit 4.1 Schematic 4.2 Floor Plan of PCB layout SN8F5708 Starter-Kit User Manual Rev
6 4.3 Component Description Number Description C30 C41 12-ch ADC capacitors. C42 C45 AVREFH/AVREFL capacitors. D12 MCU LED J11 DC 7.5V power adapter J13/J15 External power source. SW21 External reset trigger source J14 VDD power source is 5.0V, 3.3V or external power. J21 Debug Port J30 J35 I/O connector. R21, C21 External reset pull-high resister and capacitor. R22, R23 I2C pull-high resisters. SW11 Target power (VDD) switch U21 SN8F5708F real chip (Sonix standard option). Y21, C22, C23 External crystal/resonator oscillator components. SN8F5708 Starter-Kit User Manual Rev
7 5 SN8F5703 Starter-Kit 5.1 Schematic 5.2 Floor Plan of PCB layout SN8F5703 Starter-Kit User Manual Rev
8 5.3 Component Description Number Description C30 C40 11-ch ADC capacitors. C41 AVREFH capacitor. D12 MCU LED J11 DC 7.5V power adapter J13/J15 External power source. SW21 External reset trigger source J14 VDD power source is 5.0V, 3.3V or external power. J21 Debug Port J30 J32 I/O connector. J33 Timer 2 capture connector. J34 Timer 2 compare connector. R21, C21 External reset pull-high resister and capacitor. R22, R23 I2C pull-high resisters. SW11 Target power (VDD) switch U21 SN8F5703X real chip (Sonix standard option). Y21, C22, C23 External crystal/resonator oscillator components. SN8F5703 Starter-Kit User Manual Rev
9 6 SN8F5702 Starter-Kit 6.1 Schematic 6.2 Floor Plan of PCB layout SN8F5702 Starter-Kit User Manual Rev
10 6.3 Component Description Number Description C30 C39 10-ch ADC capacitors. C41 AVREFH capacitor. D12 MCU LED J11 DC 7.5V power adapter J13/J15 External power source. SW21 External reset trigger source J14 VDD power source is 5.0V, 3.3V or external power. J21 Debug Port J30 J32 I/O connector. J33 Timer 2 capture connector. J34 Timer 2 compare connector. R21, C21 External reset pull-high resister and capacitor. R22, R23 I2C pull-high resisters. SW11 Target power (VDD) switch U21 SN8F5702T real chip (Sonix standard option). SN8F5702 Starter-Kit User Manual Rev
11 7 SN8F5804 Starter-Kit 7.1 Schematic 7.2 Floor Plan of PCB layout SN8F5804 Starter-Kit User Manual Rev
12 7.3 Component Description Number Description C30 C42 13-ch ADC capacitors. C29 AVREFH capacitor. D12 MCU LED J11 DC 7.5V power adapter J13/J15 External power source. SW21 External reset trigger source J14 VDD power source is 5.0V, 3.3V or external power. J21 Debug Port J30 J33 I/O connector. J34 Timer 2 capture connector. J35 Timer 2 compare connector. R21, C21 External reset pull-high resister and capacitor. R22, R23 I2C pull-high resisters. SW11 Target power (VDD) switch U21 SN8F5804X real chip (Sonix standard option). Y21, C22, C23, External crystal/resonator oscillator components. Y22, C24, C25 J40 LCD connector. User Manual 8051-based Microcontroller SN8F5804 Starter-Kit User Manual Rev
13 Corporate Headquarters 10F-1, No. 36, Taiyuan St. Chupei City, Hsinchu, Taiwan TEL: FAX: Taipei Sales Office 15F-2, No. 171, Songde Rd. Taipei City, Taiwan TEL: FAX: Hong Kong Sales Office Unit 2603, No. 11, Wo Shing St. Fo Tan, Hong Kong TEL: FAX: Shenzhen Contact Office High Tech Industrial Park, Shenzhen, China TEL: FAX: USA Office TEL: TEL: Japan Office 2F, 4 Chome-8-27 Kudanminami Chiyoda-ku, Tokyo, Japan TEL: FAX: jpsales@sonix.com.tw FAE Support via 8-bit Microcontroller Products: sa1fae@sonix.com.tw All Products: fae@sonix.com.tw SN8F5804 Starter-Kit User Manual Rev
SN32F100 Series QUICK START. SN32F100 Series SN32F107 SN32F108 SN32F109. SONiX TECHNOLOGY CO., LTD Page 1 Version 3.1
SN32F100 Series QUICK START SN32F107 SN32F108 SN32F109 SONiX SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does
SONiX 32-bit MCU ISP. User Guide. SONIX 32-Bit MCU Series. Version 3.1 SN32F700 SN32F710 SN32F720 SN32F100 SN32F730 SN32F740 SN32F750 SN32F760
SONiX 32-bit MCU ISP User Guide Version 3.1 SN32F700 SN32F710 SN32F720 SN32F100 SN32F730 SN32F740 SN32F750 SN32F760 SONiX 32-Bit Cortex-M0 Micro-Controller SONIX reserves the right to make change without
M68HC705E24PGMR PROGRAMMER USER'S MANUAL
M68HC705E24PGMR/D Rev. 2 March 1995 M68HC705E24PGMR PROGRAMMER USER'S MANUAL Third Edition MOTOROLA Ltd., 1993, 1995; All Rights Reserved Motorola reserves the right to make changes without further notice
M68HC705E6PGMR PROGRAMMER USER'S MANUAL
M68HC705E6PGMR/D2 nc. Oct 1993 M68HC705E6PGMR PROGRAMMER USER'S MANUAL Motorola reserves the right to make changes without further notice to any products herein to improve reliability, function or design.
2005: 0.5 PQ-MDS-PCIEXP
HW Getting Started Guide PQ-MDS-PCIEXP Adaptor December 2005: Rev 0.5 PQ-MDS-PCIEXP Adaptor HW Getting Started Guide Step 1:Check HW kit contents 1.PQ-MDS-PCIEXP Adaptor 2.PIB (Platform I/O Board) to PCIEXP
SONIX 8-BIT MCU OTP Easy Writer
SONIX 8-BIT MCU OTP Easy Writer User s Manual General Release Specification SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design.
Freescale Semiconductor, I
M68HC705X4PGMR/D1 August 1991 M68HC705X4 PROGRAMMER BOARD (REVision A PWBs only) INTRODUCTION This application note describes the programming technique used to program and verify the XC68HC705X4 microcontroller
Using the Project Board LCD Display at 3.3 volts
Freescale Semiconductor SLK0100AN Application Note Rev. 0, 1/2007 By: John McLellan Applications Engineering Austin, TX 1 Introduction This document guides you through the steps necessary to use the LCD
Using IIC to Read ADC Values on MC9S08QG8
Freescale Semiconductor Application Note AN3048 Rev. 1.00, 11/2005 Using IIC to Read ADC Values on MC9S08QG8 by Donnie Garcia Application Engineering Microcontroller Division 1 Introduction The MC9S08QG8
PCB Layout Guidelines for the MC1321x
Freescale Semiconductor Application Note Document Number: AN3149 Rev. 0.0, 03/2006 PCB Layout Guidelines for the MC1321x 1 Introduction This application note describes Printed Circuit Board (PCB) footprint
MPC8349E-mITX-GP Board Errata
Freescale Semiconductor Document Number: MPC8349EMITX-GPBE Rev. 2, 01/2007 MPC8349E-mITX-GP Board Errata This document describes the known errata and limitations of the MPC8349E-mITX-GP reference platform.
Electrode Graphing Tool IIC Driver Errata Microcontroller Division
Freescale Semiconductor User Guide Addendum TSSEGTUGAD Rev. 1, 03/2010 Electrode Graphing Tool IIC Driver Errata by: Microcontroller Division This errata document describes corrections to the Electrode
HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H
Freescale Semiconductor Engineering Bulletin EB664 Rev. 6, 08/2006 HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H by: Devaganesan Rajoo HC12
Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5
Freescale Semiconductor Application Note Document Number: AN3417 Rev. 0.1, 01/2010 Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5 by: Power Management and Audio
DEMO9S08AC60E. User s Guide. Freescale Semiconductor User s Guide. DEMO9S08AC60EUG Rev. 0.1, 11/2007
Freescale Semiconductor User s Guide DEMO9S08AC60EUG Rev. 0.1, 11/2007 DEMO9S08AC60E User s Guide Freescale Semiconductor, Inc., 2007. All rights reserved. How to Reach Us: USA/Europe/Locations not listed:
PQ-MDS-QOC3 Module. HW Getting Started Guide. Contents. About This Document. Required Reading. Definitions, Acronyms, and Abbreviations
HW Getting Started Guide PQ-MDS-QOC3 Module July 2006: Rev. A Contents Contents........................................................................................ 1 About This Document..............................................................................
MC56F825x/MC56F824x (2M53V) Chip Errata
Freescale Semiconductor MC56F825XE_2M53V Chip Errata Rev. 1, 05/2012 MC56F825x/MC56F824x (2M53V) Chip Errata The following errata items apply to devices of the maskset 2M53V. 2012 Freescale Semiconductor,
Upgrade the Solution With No Changes 2 Upgrade the Solution With No Changes If a Codebase does not contain updates to its properties, it is possible t
Freescale Semiconductor Application Note Document Number: AN3819 Rev. 0.0, 02/2009 Methods for Upgrading Freescale BeeStack Codebases 1 Introduction This note describes how to upgrade an existing Freescale
Apollo2 EVB Quick Start Guide
Apollo2 EVB Quick Start Guide Doc ID: QS-A2-1p00 Revision 1.0 June 2017 QS-A2-1p00 Page 1 of 11 2017 Ambiq Micro, Inc. Table of Content 1. Introduction...3 2. Documentation Revision History...3 3. Overview
56F8300 BLDC Motor Control Application
56F8300 BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document 56F8300 16-bit Digital Signal Controllers 8300BLDCQETD Rev. 2 08/2005 freescale.com Document
Using the Multi-Axis g-select Evaluation Boards
Freescale Semiconductor Application Note Rev 2, 10/2006 Using the Multi-Axis g-select Evaluation Boards by: Michelle Clifford and John Young Applications Engineers Tempe, AZ INTRODUCTION This application
Freescale Semiconductor, I
SEMICONDUCTOR APPLICATION NOTE Order this document by AN65/D Prepared by: Bill Lucas and Warren Schultz A plug in module that is part of a systems development tool set for pressure sensors is presented
Figure 1. Power Barrel Connector Requirements
Freescale Semiconductor Quick Start Guide Rev. 0.1, 06/29/2004 DEMO9S12NE64 Demo Quick Start Guide Introduction This kit and guide contains everything you need to get started. You will connect the board
56F805. BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers
56F805 BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document 56F800 6-bit Digital Signal Controllers 805BLDCQETD Rev. 08/2005 freescale.com BLDC Motor Control
Controller Continuum. for Microcontrollers V6.3. Quick Start
Controller Continuum for Microcontrollers V6.3 Quick Start CodeWarrior Development Studio for Microcontrollers V6.x Quick Start SYSTEM REQUIREMENTS Hardware Operating System Disk Space PC with 1 GHz Intel
Device Errata MPC860ADS Application Development System Board Versions ENG, PILOT, REV A
nc. Microprocessor and Memory Technologies Group Errata Number: E2 Device Errata MPC860ADS Application Development System Board Versions ENG, PILOT, REV A February 5, 1997 1. Failures bursting to EDO DRAM.
PAS08QF80 User s Manual
PAS08QF80 User s Manual HC(S)08 Programming Adapter PAS08QF80UM Revision 0., June 00 User s Manual PAS08QF80 HC(S)08 Programming Adapter PAS08QF80 Quick Start Guide The PAS08QF80 is a low-cost universal
Quick Start Guide for TWR-S08MM128-KIT TOWER SYSTEM MC9S08MM128. The industry s most complete solution for portable medical applications
Quick Start Guide for TWR-S08MM128-KIT TOWER SYSTEM MC9S08MM128 The industry s most complete solution for portable medical applications TOWER SYSTEM Get to Know the TWR-S08MM128-KIT BDM Interface for MC9S08MM128
Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME)
Freescale Semiconductor User s Guide Document Number: KTUSBSPIPRGUG Rev. 1.0, 7/2010 Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME) Figure 1. KITUSBSPIEVME and KITUSBSPIDGLEVME
Freescale Semiconductor, I
nc. Order this document by /D Motorola Semiconductor How to Program Chip Selects on Modular Microcontrollers with a System Integration Module or a Single-Chip Integration Module By Sharon Darley Austin,
PAS08QF5264 User s Manual
PAS08QF6 User s Manual HC(S)08 Programming Adapter PAS08QF6UM Revision 0., June 00 User s Manual PAS08QF6 HC(S)08 Programming Adapter PAS08QF6 Quick Start Guide The PAS08QF6 is a low-cost universal programming
EB180. Motorola Semiconductor Engineering Bulletin. Differences between the MC68HC705B16 and the MC68HC705B16N. Freescale Semiconductor, I
nc. Order this document by /D Motorola Semiconductor Differences between the MC68HC705B16 and the MC68HC705B16N By Joanne Field CSIC Applications Motorola Ltd. East Kilbride, Scotland Introduction Motorola
SRAM SRAM SRAM SCLK khz
MOTOROLA nc. SEMICONDUCTOR PRODUCT INFORMATION Advance Information Evaluation Module Order this document by: P/D The DSP56603 Evaluation Module () is designed as a low-cost platform for developing real-time
EB366. In-Circuit Programming of FLASH Memory Using the Monitor Mode for the MC68HC908GP32. Introduction
Order this document by /D REV 1 Semiconductor Products Sector Engineering Bulletin In-Circuit Programming of FLASH Memory Using the Monitor Mode for the MC68HC908GP32 By Timothy J. Airaudi Applications
USB Bootloader GUI User s Guide
Freescale Semiconductor User s Guide Document Number: MC9S08JS16UG Rev. 0, 10/2008 USB Bootloader GUI User s Guide by: Derek Liu Applications Engineering China 1 Overview The MC9S08JS16 (JS16) supports
NOVPEK NetLeap User Guide
NOVPEK NetLeap User Guide Document Number: 001-124-04 Rev. 1.0 1/2017 Property of NovTech, Inc. 2016. All Rights Reserved Contact Information: Home Page: Company: www.novtech.com Modules: www.novsom.com/#/products1/
MC33696MODxxx Kit. 1 Overview. Freescale Semiconductor Quick Start Guide. Document Number: MC33696MODUG Rev. 0, 05/2007
Freescale Semiconductor Quick Start Guide Document Number: MC33696MODUG Rev. 0, 05/2007 MC33696MODxxx Kit by: Laurent Gauthier Toulouse, France 1 Overview This document provides introductory information
MCF5445x Configuration and Boot Options Michael Norman Microcontroller Division
Freescale Semiconductor Application Note Document Number: AN3515 Rev. 1, 04/2008 MCF5445x Configuration and Boot Options by: Michael Norman Microcontroller Division 1 Configuration Modes The Freescale
16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller Solutions Group, Scotland
Freescale Semiconductor Users Guide Document Number: S12XHY256ACDUG Rev. 0, 10/2010 16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller
MC33794 Touch Panel System Using E-Field Sensor Setup Instructions
Freescale Semiconductor MC33794SIUG User s Guide Rev. 1.0, 09/2005 MC33794 Touch Panel System Using E-Field Sensor Setup Instructions Reference Design Documentation for RDMC33794 This document contains
Component Development Environment Installation Guide
Freescale Semiconductor Document Number: PEXCDEINSTALLUG Rev. 1, 03/2012 Component Development Environment Installation Guide 1. Introduction The Component Development Environment (CDE) is available as
Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen
Freescale Semiconductor Application Note AN3589 Rev. 0, 02/2008 Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen 1 Introduction This application note explains
56F805. Digital Power Factor Correction using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers. freescale.
56F805 Digital Power Factor Correction using Processor Expert TM Targeting Document 56F800 6-bit Digital Signal Controllers 805DPFCTD Rev. 0 08/2005 freescale.com Digital Power Factor Correction This
MTIM Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4160 Rev. 0, 8/2010 MTIM Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group India IDC MSG NOIDA 1 Introduction
SRAM SRAM SRAM. Data Bus EXTAL ESSI KHz MHz. In Headphone CS MHz. Figure 1 DSP56302EVM Functional Block Diagram
MOTOROLA SEMICONDUCTOR PRODUCT INFORMATION Advance Information Evaluation Module Order this document by: P/D The Evaluation Module () is designed as a low-cost platform for developing real-time software
Sensorless BLDC Motor Control Based on MC9S08PT60 Tower Board User Guide
Freescale Semiconductor Document Number:S08PT60UG User Guide Rev. 0, 02/2013 Sensorless BLDC Motor Control Based on MC9S08PT60 Tower Board User Guide 1 Overview This user guide describes the basic steps
Interfacing MPC5xx Microcontrollers to the MFR4310 FlexRay Controller David Paterson MCD Applications, East Kilbride
Freescale Semiconductor Application Note Document Number: AN3256 Rev. 2, 2/2008 Interfacing MPC5xx Microcontrollers to the MFR4310 FlexRay Controller by: David Paterson MCD Applications, East Kilbride
Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages
Freescale Semiconductor Engineering Bulletin EB360 Rev. 1, 10/2005 Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages This document describes the differences between the 196-pin
for ColdFire Architectures V7.2 Quick Start
for ColdFire Architectures V7.2 Quick Start CodeWarrior Development Studio for ColdFire Architectures V7.2 Quick Start SYSTEM REQUIREMENTS Hardware Operating System Disk Space 1 GHz Pentium compatible
Prepared by: Gang Chen ON Semiconductor U1 NCP1529 GND SW 5. Figure 1. Typical Simulation Circuit of NCP1529 for DC DC Applications
AND94/D Use of NCP1529 Pspice Model Prepared by: Gang Chen ON Semiconductor APPLICATION NOTE Overview The NCP1529 is a synchronous step down DC DC converter for portable applications powered by one cell
NCP370GEVB. NCP370 Over Voltage Protection Controller with Reverse Charge Control Evaluation Board User's Manual EVAL BOARD USER S MANUAL
NCP370 Over Voltage Protection Controller with Reverse Charge Control Evaluation Board User's Manual Description The NCP370 is an overvoltage, overcurrent and reverse control device. Two main modes are
for Freescale MPC55xx/MPC56xx Microcontrollers V2.10 Quick Start
for Freescale MPC55xx/MPC56xx Microcontrollers V2.10 Quick Start CodeWarrior Development Studio for MPC55xx/MPC56xx Microcontrollers, version 2.xx Quick Start SYSTEM REQUIREMENTS Hardware Operating System
Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation
Freescale Semiconductor Application Note AN3865 Rev. 1.0, 2/2010 Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation 1 Overview
Advance Information 24-BIT GENERAL PURPOSE DIGITAL SIGNAL PROCESSOR
MOTOROLA SEMICONDUCTOR PRODUCT BRIEF Order this document by: DSP56309PB/D, Rev 0 DSP56309 Advance Information 24-BIT GENERAL PURPOSE DIGITAL SIGNAL PROCESSOR The DSP56309 is a member of the DSP56300 core
However, if an event comes in when the new value is being written to the pulse accumulator counter, that event could be missed. One solution to this p
Engineering Bulletin 7/2003 HC11 and HC12 Families Pulse Accumulator By Darci Ernst Systems Engineering Austin, TX Introduction and Background Detailed Description The timer module is one of the peripherals
The USB Debug Adapter package contains the following items: USB Debug Adapter (USB to Debug Interface) with attached 7 Ribbon Cable
USB DEBUG ADAPTER USER S GUIDE 1. Contents The USB Debug Adapter package contains the following items: USB Debug Adapter (USB to Debug Interface) with attached 7 Ribbon Cable 2. USB Debug Adapter Specifications
MCF54451, MCF54452, MCF54453, MCF54454,
Chip Errata MCF54455DE Rev. 5, 8/21 MCF54455 Chip Errata Revision: All Supports: MCF5445, MCF54451, MCF54452, MCF54453, MCF54454, and MCF54455 Summary of MCF5445x Errata The latest mask of the MCF5445x
NCN9252MUGEVB. High-Speed USB 2.0 (480 Mbps) DP3T Switch for USB/UART/Data Multiplexing Evaluation Board User's Manual EVAL BOARD USER S MANUAL
High-Speed USB 2.0 (480 Mbps) DP3T Switch for USB/UART/Data Multiplexing Evaluation Board User's Manual EVAL BOARD USER S MANUAL OVERVIEW The NCN9252 is a DP3T switch for combined UART and USB 2.0 high
Mask Set Errata. Introduction. MCU Device Mask Set Identification. MCU Device Date Codes. MCU Device Part Number Prefixes MSE08AZ32_0J66D 12/2002
Mask Set Errata MSE08AZ32_0J66D 12/2002 Mask Set Errata for MC68HC08AZ32, Mask 0J66D Introduction This mask set errata applies to this MC68HC08AZ32 MCU mask set: 0J66D MCU Device Mask Set Identification
Getting Started with the Student Learning Kit Application Module Using the MC9S12DT256 Microcontroller Application Module
Freescale Semiconductor APS12DT256PG Quick Reference Guide Rev. 0, 9/2007 Getting Started with the Student Learning Kit Application Module Using the MC9S12DT256 Microcontroller Application Module For use
MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series
Freescale Semiconductor Technical Data Document Number: MPC7410ECS08AD Rev. 1, 11/2010 MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series This document describes
PQ-MDS-PIB. HW Getting Started Guide 12,13. January 2006: Rev Check kit contents
HW Getting Started Guide PQ-MDS-PIB January 2006: Rev. 0.4 Step 1: Check kit contents 1. PQ- MDS- PIB (Platform I/O Board, or PIB ) 2. Power cable extension with on-off switch 3. 25 Pin IEEE 1284 Parallel
Performance Factors nc. 2 Performance Factors The following sections discuss performance factors. 2.1 MPX vs. 60x Bus Mode One of the main factors tha
nc. White Paper MPC74XXBUSWP Rev. 1.1, 11/2003 Memory Bus Throughput of the MPC74xx Richie David, CPD Applications risc10@email.mot.com This document compares the memory bus data transfer rate of the MPC7450
ColdFire Convert 1.0 Users Manual by: Ernest Holloway
Freescale Semiconductor CFCONVERTUG Users Guide Rev.0, 09/2006 ColdFire Convert 1.0 Users Manual by: Ernest Holloway The ColdFire Convert 1.0 (CF) is a free engineering tool developed to generate data
M68CPA08W1628T20. Programming Adapter. User s Manual. Freescale Semiconductor, I. User s Manual. M68CPA08W1628T20UM/D Version 1.
nc. User s Manual M68CPA08W1628T20UM/D Version 1.1 January 12, 2004 M68CPA08W1628T20 Programming Adapter User s Manual Motorola, Inc., 2004 nc. Important Notice to Users While every effort has been made
KIT34901EFEVB Evaluation Board
Freescale Semiconductor, Inc. User s Guide Document Number: KT34901UG Rev. 1.0, 2/2014 KIT34901EFEVB Evaluation Board Featuring the MC34901 High Speed CAN Transceiver Contents Figure 1. KIT34901EFEVB Evaluation
Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer
Freescale Semiconductor Application Note Rev 1, 06/2007 Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer by: Kimberly Tuck Accelerometer Systems and Applications Engineering Tempe,
USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup using a USB Debug Adapter
C8051F2XX DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F2xx Development Kits contain the following items: C8051F206 or C8051F226 Target Board C8051Fxxx Development Kit Quick-Start Guide Silicon
Table 1. RS232 Serial Adapter DEBUG Connector Pin Descriptions
RS232 SERIAL ADAPTER (EC2) USER S GUIDE 1. Contents The RS232 Serial Adapter (EC2) package contains the following items: RS232 Serial Adapter (RS232 to Debug Interface) 7 Ribbon Cable 2. RS232 Serial Adapter
APPNOTE NUMBER AN1139 PI3WVR13412 DP1.4/HDMI2.0 Mux/Demux Application Guidelines Justin Lee
APPNOTE NUMBER AN1139 PI3WVR13412 DP1.4/HDMI2.0 Mux/Demux Application Guidelines Justin Lee 1. Introduction PI3WVR13412 is video switch that supports wide input voltage range. It can be employed in DP1.3/4
PDB Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4163 Rev. 0, 8/2010 PDB Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document
APPNOTE NUMBER AN1138 PI3WVR13612 DP1.4/HDMI2.0 Mux/Demux Application Guidelines Justin Lee
APPNOTE NUMBER AN1138 PI3WVR13612 DP1.4/HDMI2.0 Mux/Demux Application Guidelines Justin Lee 1. Introduction PI3WVR13612 is video switch that supports wide input voltage range. It can be employed in DP1.3/4
Symphony SoundBite: Quick Start with Symphony Studio. Installation and Configuration
Symphony SoundBite: Quick Start with Symphony Studio Installation and Configuration Document Number: DSPB56371UGQS Rev. 2 September 2008 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com
Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series
Freescale Semiconductor Document Number: AN4590 Application Note Rev 0, 9/2012 Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series by: Lukas Vaculik Rožnov pod Radhoštem Czech Republic 1 Introduction
EchoRemote Evaluation Software for Windows
Freescale Semiconductor Application Note Document Number: AN2953 Rev.1, 05/2007 EchoRemote Evaluation Software for Windows 1 Overview EchoRemote is a Microsoft Windows program that communicates with the
SGTL5000 I 2 S DSP Mode
Freescale Semiconductor Application Note Document Number: AN3664 Rev. 2, 11/2008 SGTL5000 I 2 S DSP Mode by Name of Group Freescale Semiconductor, Inc. Austin, TX 1 Description SGTL5000 supports multiple
Using the Asynchronous DMA features of the Kinetis L Series
Freescale Semiconductor Document Number:AN4631 Application Note Rev. 0, 12/2012 Using the Asynchronous DMA features of the Kinetis L Series by: Chris Brown 1 Introduction The power consumption of devices
MPC8349EA MDS Processor Board
HW Getting Started Guide MPC8349EA MDS Processor Board Nov 2006: Rev. A Contents Contents.................................................................................. 1 About This Document.......................................................................
Gallium Arsenide PHEMT RF Power Field Effect Transistor
Technical Data Available at http://www.freescale.com/rf, Go to Tools Rev., 6/2005 Reference Design Library Gallium Arsenide PHEMT Power Field Effect Transistor Device Characteristics (From Device Data
M68EM05X4 EMULATOR MODULE USER'S MANUAL
M68EM05X4/D Rev. 2 January 1996 M68EM05X4 EMULATOR MODULE USER'S MANUAL Third Edition MOTOROLA Ltd., 1993, 1995, 1996; All Rights Reserved Motorola reserves the right to make changes without further notice
CodeWarrior Development Studio
CodeWarrior Development Studio for StarCore and SDMA Architectures Quick Start for Windows Operating Systems and Embedded Cross Trigger This Quick Start explains how to set up a sample project to use the
Use of PGA on MC56F800x Interaction of PDB, PGA and ADC
Freescale Semiconductor Document Number: AN4334 Application Note Rev. 0, 03/2012 Use of PGA on MC56F800x Interaction of PDB, PGA and ADC by: William Jiang System and Application, Microcontroller Solutions
AND8335/D. Design Examples of Module-to-Module Dual Supply Voltage Logic Translators. SIM Cards SDIO Cards Display Modules HDMI 1-Wire Sensor Bus
Design Examples of Module-to-Module Dual Supply Voltage Logic Translators Prepared by: Jim Lepkowski ON Semiconductor Introduction Dual supply voltage logic translators connect modules or PCBs together
MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations
Freescale Semiconductor Engineering Bulletin Document Number: EB711 Rev. 0, 05/2009 MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations by: Peter Kardos Application Engineer, Roznov
Keil uvision 4 Kinetis Support for Freescale MQX RTOS Release Notes
Keil uvision 4 Kinetis Support for Freescale MQX RTOS 3.7.0 Release Notes PRODUCT: Keil uvision 4 Kinetis Support for Freescale MQX RTOS 3.7.0 PRODUCT VERSION: 1.0 DESCRIPTION: Adding support for Keil
Functional Differences Between the DSP56307 and DSP56L307
Freescale Semiconductor Engineering Bulletin EB361 Rev. 3, 10/2005 Functional Differences Between the DSP56307 and DSP56L307 The DSP56307 and DSP56L307, two members of the Freescale DSP56300 family of
i.mx31 PDK Power Measurement with GUI
Freescale Semiconductor Application Note Document Number: AN4061 Rev. 0, 02/2010 i.mx31 PDK Power Measurement with GUI by Multimedia Application Division Freescale Semiconductor, Inc. Austin, TX This application
CCD VIDEO PROCESSING CHAIN LPF OP AMP. ADS-93x 16 BIT A/D SAMPLE CLAMP TIMING GENERATOR ALTERA 7000S ISP PLD UNIT INT CLOCK MASTER CLOCK
ADS-93X Timing Generator Board User's Manual Timing Generator Board Description This Timing Generator Board is designed to be part of a two board set, used in conjunction with an ON Semiconductor CCD Imager
M68CPA08QF Programming Adapter. User s Manual. Freescale Semiconductor, I. User s Manual. M68CPA08QF324448UM/D Version 1.
nc. User s Manual M68CPA08QF324448UM/D Version 1.0 June 24, 2003 M68CPA08QF324448 Programming Adapter User s Manual Motorola, Inc., 2003 nc. Important Notice to Users While every effort has been made to
1.3 General Parameters
Advance Information MPC8245RZUPNS/D Rev. 0, 3/2002 MPC8245 Part Number Specification for the XPC8245RZUnnnx Series Motorola Part Numbers Affected: XPC8245RZU400B This document describes part-number-specific
DSP5630x FSRAM Module Interfacing
SEMICONDUCTOR TECHNICAL DATA DSP5630x FSRAM Module Interfacing Prepared by: Ian Forsyth FSRAM Applications Motorola Ltd. East Kilbride, Scotland Order this document by /D INTRODUCTION Due to ever increasing
etpu General Function Set (Set 1) David Paterson MCD Applications Engineer
Freescale Semiconductor Application Note Document Number: AN2863 Rev. 0, 12/2007 etpu General Function Set (Set 1) by David Paterson MCD Applications Engineer 1 Introduction This application note complements
CM1293A-04SO. 4-Channel Low Capacitance ESD Protection Array
CM1293A-04SO 4-Channel Low Capacitance ESD Protection Array Product Description CM1293A 04SO has been designed to provide ESD protection for electronic components or subsystems requiring minimal capacitive
Installing Service Pack Updater Archive for CodeWarrior Tools (Windows and Linux) Quick Start
Installing Service Pack Updater Archive for CodeWarrior Tools (Windows and Linux) Quick Start SYSTEM REQUIREMENTS Hardware Operating System Disk Space Windows OS: PC with 1 GHz Intel Pentium compatible
NUF2221W1T2. USB Upstream Terminator with ESD Protection
Upstream Terminator with ESD Protection This device is designed for applications requiring Line Termination, EMI Filtering and ESD Protection. It is intended for use in upstream ports, Cellular phones,
CM1219. Low Capacitance Transient Voltage Suppressors / ESD Protectors
Low Capacitance Transient Voltage Suppressors / ESD Protectors Description The family of devices features transient voltage suppressor arrays that provide a very high level of protection for sensitive
Introduction to the S12G Family EEPROM Including a Comparison between the S08DZ, S12XE, and S12P Families
Freescale Semiconductor Application Note Document Number: AN4302 Rev. 0, 04/2011 Introduction to the S12G Family EEPROM Including a Comparison between the S08DZ, S12XE, and S12P Families by: Victor Hugo
Interfacing MPC5500 Microcontrollers to the MFR4310 FlexRay Controller Robert Moran MCD Applications, East Kilbride, Scotland
Freescale Semiconductor Application Note Document Number: AN3269 Rev. 3, 02/2010 Interfacing MPC5500 Microcontrollers to the MFR4310 FlexRay Controller by: Robert Moran MCD Applications, East Kilbride,
Clock Mode Selection for MSC8122 Mask Set K98M
Freescale Semiconductor Application Note AN2904 Rev. 0, 11/2004 Clock Mode Selection for MSC8122 Mask Set K98M By Donald Simon and Wes Ray This application note describes the MSC8122 clock modes for mask
Interfacing MC33903/4/5 With MC9S08DZ60
Freescale Semiconductor Document Number:AN4554 Application Note Rev. 0, 7/2012 Interfacing MC33903/4/5 With MC9S08DZ60 by: Nitin Gupta Automotive and Industrial Solutions Group 1 Introduction System Basis