adjustment via factory default or directly on the sensor signal display flashing at threshold undercut or /exceedance

Transcription

1 Processor-based bargraph with digital display vertical or horizontal MB3 3-digit digital display red display, optional green 30 dots bargraph display tricolour adjustment via factory default or directly on the sensor signal adjustable bargraph or dot operation dot operation with permanent midpoint display min/max memory plug-in terminal display flashing at threshold undercut or /exceedance zero-key fort he triggering of Hold, Tara permanent min/max value recording volume metering (Totaliser) programming interlock via access code protection class IP65 at the front option: 2 relay outputs option: sensor supply option: analog output option: galv. insulated digital input accessories: pc-based configuration-kit PM-TOOL with CD & USB adapter for devices without keypad, for a simple adjustment of standard devices status 06/02/ bargraph_gb.doc page 13 96x24

2 Bargraph Direct current Direct voltage ORDER NUMBER (without options) EUR Direct current, direct voltage Supply VAC horizontal MB3-3VT3HR.0001.S70AD 260,00 vertical MB3-3VT3VR.0001.S70AD 260,00 Supply VDC horizontal MB3-3VT3HR AD 260,00 vertical MB3-3VT3VR AD 260,00 Product key options: M B 3-3 V T 3 H R S 7 0 A D Device with a supply of VAC M B 3-3 V T 3 V R S 7 0 A D EUR M B 3-3 V T 3 H R A D Device with a supply of VDC M B 3-3 V T 3 V R A D 2 2 relay outputs 30,00 1 without keypad, programming on the backside via interface on demand X Analog output 0/4-20 ma, 0-10 VDC at VAC 90,00 X Analog output 0/4-20 ma, 0-10 VDC at VDC 125,00 2 Sensor supply 10 VDC / 20 ma incl. digital input at VAC 35,00 3 Sensor supply 24 VDC / 50 ma incl. digital input at VAC 35,00 2 Sensor supply 10 VDC / 20 ma incl. digital input at VDC 60,00 3 Sensor supply 24 VDC / 50 ma incl. digital input at VDC 60,00 3 Interface RS232 70,00 4 Interface RS485 70,00 I Digital input 10,00 G Green display, 8 mm height 10,00 status 06/02/ bargraph_gb.doc page 14

3 ORDER NUMBER (without options) EUR Direct current, direct voltage Special measuring input as inscripted, up to max. 300 VDC Supply VAC horizontal MB3-3VT3HR.0H01.S70AD 290,00 vertical MB3-3VT3VR.0H01.S70AD 290,00 Product key options: M B 3-3 V T 3 H R. 0 H 0 1. S 7 0 A D M B 3-3 V T 3 V R. 0 H 0 1. S 7 0 A D EUR 2 2 relay outputs 30,00 1 Without keypad, operation on the back on demand X Analog output 0/4-20 ma, 0-10 VDC 90,00 G 8 mm green display 10,00 Accessories Parameterisation software PM-TOOL, for devices without keypad, PM-Tool-MUSB4 89,00 for a simple adjustment of standard devices, incl. CD & USB-adapter. Programming is made via an interface on the back. status 06/02/ bargraph_gb.doc page 15 96x24

4 Connection examples MB3-devices with current/voltage input MB3 devices with current input/voltage input and sensor supply status 06/02/ bargraph_gb.doc page 16

5 Technical data Dimensions Housing B96 x H24 x T120 mm (T=144 mm incl. plug-in terminal) Panel cut-out x mm Fixing screw elements for a wall thickness of up to 3 mm Housing material PC Polycarbonate, colour black UL94V-0 Sealing material EPDM, 65 Shore Protection class IP65 standard at the front IP00 at the back Weight approx. 200 g Connection plug-in terminal; wire cross section up to 2.5 mm 2 Display Display 3-digit, 8 mm high Bargraph 30 digit, tricolour Segment colour red, optional green Display Overflow flashing of the two upper bargraph elements Underflow flashing of the two lower bargraph elements Display time seconds MB3-3VT3XR.0001 Measuring input Measuring span V / -22 ma...24 ma Measuring range V / 0/4.20 ma Input resistance Ri at ~200 kω / Ri at ~100 Ω Measuring error 0,1% of measuring range, ± 1 digit / 0,1% of measuring range, ± 1 Digit Temperature drift 100 ppm/k Measuring time seconds Measuring principle U/F-converter Resolution approx. 18 bit at 1 second measuring time MB3-3VT3XR.0H01 Measuring input Measuring span VDC / VDC / -1 1 ADC Measuring range VDC / 0 50 VDC / 0 1 ADC Input resistance Ri at ~1 MΩ / Ri at ~200 kω / Ri at ~0,2 Ω Measuring error 0.5% of final value, ± 1 digit Temperature drift 100 ppm/k Measuring time seconds Measuring principle U/F-converter Resolution approx. 18 bit at 1 second measuring time Output Relay with change-over contact 250 V / 5 AAC, 30 V / 5 ADC Switching cycle 30 * 10 3 at 5 AAC, 5 ADC ohm resistive load 10 * 10 6 mechanically Separation according to DIN EN50178 / Specific values according to DIN EN Analog output 0-10 VDC, 0/4-20 ma (16 Bit) switchable Sensor supply 24 VDC / 50 ma 10 VDC / 20 ma Digital input Input < 2.4 V OFF; 10 V ON; max. 30 VDC R I ~ 5 kω Interface Protocol manufacturer-specific ASCII RS baud, no parity, 8 databit, 1 stopbit Wire length max. 3 m RS485 Wire length baud, no parity, 8 databit, 1 stopbit max m Power pack Supply VAC 50/60 Hz / DC +/- 10% (max. 10 VA) VDC, galvanisch getrennt (max. 8 VA) Memory EEPROM Data life 100 years Ambient conditions Working temperature 0 to + 50 C Storing temperature -20 to + 80 C Climatic density relative humidity 0-85% on years average without dew CE-marking Conformity according to directive 2004/108/EG EMV EN Safety standard according to directive 2006/95/EG EN 61010; EN status 06/02/ bargraph_gb.doc page 17 96x24

6 Sealing Sealing Housing: 3,0 145,0 (154,0) Installation depth, incl. plug-in terminal (depth depends on options) 3,0 96,0 24,0 96,0 Gap for physical unit 24,0 135,0 (144,0) Installation depth incl. plug-in terminal (depth depends on options) Gap for physical unit status 06/02/ bargraph_gb.doc page 18

7 ORDER KEY MB3 Bargraph M B 3-3 V T 3 H R A D Standard type M-Line Dimension D Physical unit (free choice) Bargraph display B Version Installation depth A A 144 mm 3 incl. plug-in terminal Setpoints 0 no setpoint Housing size 2 2 setpoints B96xH24xD120 mm 3 Protection class Display type 1 Without keypad, operation on the V, A V back 7 IP65 / plug-in terminal Bargraph colours Tricolour T Supply voltage (red, green, orange) S VAC VDC, galv. insulated Resolution 30 points 3 Measuring input 1 Standard signal 0/4-20 ma, 0-10 VDC Adjustment horizontal H Analog output vertical V 0 none x 0-10 VDC, 0/4-20 ma Digital display 3-digit, 8mm, green G Sensor supply 3-digit, 8mm, red R 0 without 2 10 VDC / 20 ma, incl. digital input Digital input 3 24 VDC / 50 ma, incl. digital input none 0 1x digital input I DC devices Interface RS232 3 galv. insulated Special measuring inputs Interface RS485 4 galv. insulated H 300 VDC, 50 VDC, 1 ADC status 06/02/ bargraph_gb.doc page 19 96x24

8 Blind covers with fastening clamps GH ,90 status 06/02/ bargraph_gb.doc page 20 ZU