BS 6323 PART2 SEAMLESS AND WELDED STEEL TUBES FOR AUTOMOBILE MECHANICAL AND GENERAL ENGINEER PURPOSE
|
|
|
- Annabel Ferguson
- 5 years ago
- Views:
Transcription
1 BS 6 PRT SEMLESS ND WELDED STEEL TUBES FOR UTOMOBILE MECHNICL ND GENERL ENGINEER PURPOSE. Scope Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes PRT : Specific requirements for hot finished welded steel tubes covers the specific requirements for these tubes and defines the chemical composition mechanical properties, dimensions, dimensional tolerances and technical delivery conditions, replaces BS980: 950 BS 775:96 and BS 0: 958. Chemical Composition Grade Mfg. Chemical Composition (%) Process C Si Mn P S Ni Cr Mo Others HFW T 0.6Max 0.70Max 0.050Max 0.050Max HFW T 0.0Max 0.5Max 0.90Max 0.050Max 0.050Max HFW T 0.5Max 0.5Max.0Max 0.050Max 0.050Max HFW5 T 0.Max 0.5Max.50Max 0.050Max 0.050Max HFS S 0.0Max 0.5Max 0.90Max 0.050Max 0.050Max HFS S 0.5Max 0.5Max.0Max 0.050Max 0.050Max HFS5 S 0.Max 0.5Max.50Max 0.050Max 0.050Max HFS8 S 0.5~ Max 0.50~ Max 0.050Max CFS S 0.0Max 0.5Max 0.90Max 0.050Max 0.050Max CFS S 0.0Max 0.0~ ~ Max 0.050Max CFS S 0.5Max 0.5Max.0Max 0.050Max 0.050Max
2 CFS5 S 0.Max 0.50Max.50Max 0.050Max 0.050Max CFS6 S 0.0~ Max 0.50~ Max 0.050Max CFS7 S 0.0~ Max.0~ Max 0.050Max CFS8 S 0.0~ Max 0.50~ Max 0.050Max CFS9 S 0.9Max 0.5Max.50Max 0.050Max 0.050Max 0.5~0.5 CFS0 S 0.6Max 0.5Max 0.80Max 0.050Max 0.050Max 0.80~.0 0.5~0.0 CFS S 0.5Max 0.5Max.00Max 0.050Max 0.050Max 0.80~.0 0.5~0.0 ERW E 0.Max 0.60Max 0.050Max 0.050Max ERW E 0.6Max 0.70Max 0.050Max 0.050Max ERW E 0.0Max 0.5Max 0.90Max 0.050Max 0.050Max
3 ERW E 0.5Max 0.5Max.0Max 0.050Max 0.050Max ERW5 E 0.Max 0.50Max.50Max 0.050Max 0.050Max CEW E 0.Max 0.60Max 0.050Max 0.050Max CEW E 0.6Max 0.70Max 0.050Max 0.050Max CEW E 0.0Max 0.5Max 0.90Max 0.050Max 0.050Max CEW E 0.5Max 0.5Max.0Max 0.050Max 0.050Max CEW5 E 0.Max 0.50Max.50Max 0.050Max 0.050Max SW M 0.5Max 0.5Max.0Max 0.050Max 0.050Max SW5 M 0.Max 0.50Max.50Max 0.050Max 0.050Max LW 0.06Max 0.90Max 0.60Max 0.00Max 0.00Max 0.50Max.0~.0 N: 0.05Max
4 Ti: 5 C~0.70 LW 0.08Max 0.0~ ~ Max 0.00Max 8.0~.0 7.0~9.0 5 LWCF 6 LW 0.0Max 0.0~ ~ Max 0.00Max 9.0~.0 7.5~9.0 5 LWCF 6 LW5 0.06Max 0.0~ ~ Max 0.00Max 8.0~.0 7.5~9.0 5 LWCF5 6 LW6 0.0Max 0.0~ ~ Max 0.00Max.0~.0 6.5~8.5.5~.0 5 LWCF6 6 LW7 0.07Max 0.0~ ~ Max 0.00Max 0.0~.0 6.5~8.5.5~.0 5 LWCF7 6 LW8 LWCF8 0.08Max 0.0~ ~ Max 0.00Max 9.0~.0 7.0~9.0 Ti: 5 C~ Clod finish (hard) Cold finish (soft) nnealed Normalized 5 welded and Sized (fully softened) 6 Cold finish (fully softened) HFW: Hot finished welded HFS: Hot finish seamless CFS: Cold finish seamless ERW: Electric resistance weld induction weld CEW: Cold finished ERW SW: Submerged arc weld LW: Longitudinal welded stainless LWCF: Cold finished longitudinal welded seamless
5 . Mechanical Properties Tensile Test MPa or N/mm Grade Min Yield point Tensile Strength Remarks (Similar to JIS) HFW 95 5Min (STM0G) HFW 5 60Min (STM0G) HFW 5 0Min (STM90G) HFW5 0 90Min (STM500G) HFS 5 60Min (STKM) HFS 5 0Min (STKM) HFS5 0 90Min (STKM) HFS8 0 50Min (STKM7) 60 50Min CFS CFS CFS CFS Min 70 0Min 05 60Min 60 50Min 85 00Min 70 0Min 5 60Min 0 50Min 5 50Min 95 00Min 5 0Min Min Min 0 90Min (STKMC) (STKM) (STKM) (STKM9)
6 CFS6 CFS7 CFS8 CFS9 CFS0 CFS ERW ERW ERW ERW Min 50 50Min 05 0Min 85 60Min Min Min Min Min 05 50Min 0 50Min Min Min Min Min Min 670Min 95 05Min 50 75Min 60 85Min 55 5Min 60 05Min 95 5Min 05 00Min 70 0Min 05 60Min 50 50Min 95 00Min 5 0Min (STKM6) (STKM7) (SCM8TK) (SCM0TK) (STM90G) (STM90GB) (STM0G) (STM5G) (STM0H) ERW Min (SCM70G)
7 0 90Min (SCM70G) 5 00Min CEW CEW 5 50Min 50 75Min 60 85Min 50 0Min 65 70Min 60 05Min (STM90G) (STM90G) 95 5Min (STM0G) 70 50Min CEW CEW CEW Min 70 0Min 5 60Min 0 50Min 5 50Min 95 00Min 5 0Min Min Min 0 90Min (STM0G) (STM90G) SW 5 0Min (STK00) SW5 0 90Min (STK500) LW 05 00Min LW Min 05 50Min (0TK) LWCF 05 50Min LW 0 50Min 85 80Min
8 LWCF 85 80Min LW Min 05 50Min (0TK) LWCF Min LW6 0 50Min 85 80Min LWCF Min LW Min 05 50Min (6TK) LWCF Min LW8 LWCF Min (TK) JIS and Corresponding Foreign s JIS STM BS DIN NF ISO Grade Type Index G5 STKM C 5 MT00 C 77 ERWC C 9 St0Si C 0 R8 C C07 5 MT00 C St0 C 05 " C 9 St8 C 06 " C RSt8 C 9 St8 C USt8 RSt8 C C STKM C 5 MT05 C 77 ERWC C 9 St7 0 R C 5 MT05 C 6 HFS C RSt7 05 " " STKMB C 5 MT05 C 9 St7 06 " " 5 MT05 C Ust8
9 59 MT05 C RSt STKMC C 77 CEWC C 9 TU7b C " CFSC C 97 TU7b C 6 CFS C " CFS C STKM C MT00 C 77 ERWC C 9 St5 C 9 TU7b C 97 TS C 5 MT00 C 9 St C 90 TU7b C 0 R7 " 9 St C 9 TU8b C 05 " " STKMB C 5 MT00 C 06 " " STKMC C 77 CEWC C " CFSC C 6 CFS C STKM C 5 MT00 C 6 HFS C 97 TS9 C 0 R " STKMB C 6 HFS5 C 05 R C STMKC C 06 " " STKM5 C 5 00 C C STKM5C STKM6 C C 9 TUXC5 C 9 TUXC5 C STKM6C C STKM7 C C 6 HFS8 C STKM7C C 6 CFS8 C STKM8 C C 77 ERWC5 C 90 TU5b C 9 TU5b C 9 TU5b C
10 STKM8B C 9 TU5b C 9 TU5b C 96 TU5b C STKM8C C 90 TU5b C 9 TSa C " TS7a C 9 TS8M5 C STKM9 C 59 5 C 9 ST5 C 97 TS8 C 9 ST5 C 98 Gr. C 9 ST5 C 0 R50 C 05 R50 C 06 R50 C STKM0 C JIS and Corresponding Foreign s JIS STM BS Grade Type Index G SCr0TK Cr C08 SCM5TK CrMo SCM8TK CrMo 6 CFS0 CrMo SCM0TK CrMo CrMo SCM0TK CrMo 59 0 CrMo SCM5TK CrMo 59 5 CrMo SCM0TK CrMo 59 0 CrMo 6 CFS0 CrMo JIS and Corresponding Foreign s
11 JIS STM BS NF Grade Type Index G6 5 MT0 6 LW 967 TSZ8C7 C09 0TK 55 MT0 " LWCF " LW5 0TKC " LWCF5 5 MT6 6 LW7 6TK 55 MT6 " LWCF7 6TKC 5 MT 6 LW8 TK 55 MT " LWCF8 5 MR7 7TK 5 MT7 5 MT0 0TK 55 MT0 0TKC 5 MT0 0TK 0TKC 0JTK 0JTK
12 STKR C 500 GrB C 66 /6 C 965 T7a C C00 STKR C " *6 C " 50/5 C JIS and Corresponding Foreign s JIS BS DIN ISO Grade Type Index G7 STM C 6 ERW C 9 St8 05 R8 C C0 90G " /6 C " USt8 (0G) " RSt8 STM C 6 9 St8 05 R8 C 90GB " USt8 (0GB) " RSt8 STM C 6 HFW C 05 R C 0G " HFW C (5G) " CEW C " CEW C STM C 6 HFW C 9 St 05 R7 C 90G " HWF C 9 St (0G) STM C 6 ERW C 0G " CEW C (5G) STM C 6 ERW5 C 70G (8G)
13 STM C 6 HFW5 C 500G " ERW5 C (5G) " CEW5 C STM C 6 ERW C 0H " CEW C (5H) STM C 6 ERW5 C 70H (8H) STM C 500H (5H) STM C 50H (55H)
Carbon & Alloy Steel Seamless Tube & Pipe. ILJIN Steel Corporation Your Best Partner
Carbon & Alloy Steel Seamless Tube & Pipe ILJIN Steel Corporation Your Best Partner Contents Company Overview Company Overview 03 Manufacturing Process and Equipment 04 OCTG Casing & Tubing 06 OCTG Drill
bar Round (303S31) Round (303S31) Bright Drawn H9 Dia (in) Weight/m (Kg) Weight/m (Kg) Dia (in) 20mm
A World of Metal bar mm mm mm mm mm 7mm mm 9mm 0mm 0.0 0.0 0.0 0.0 0. 0. 0.9 0. 0. 0.0 0. 0.9 0.0 0.0 0. 0. 0.7 mm mm mm mm mm 7mm mm 0mm mm mm mm 0.9 0.99.0...9.7..00..7.9.0...0 (0S) Bright Drawn H9
STRENX TUBE 100XF STRENX TUBE 100XF. General Product Description
STRENX TUBE 100XF STRENX TUBE 100XF General Product Description Advanced high-strength structural hollow sections Strenx Tube 100XF is an HF-welded cold-formed structural hollow section made of hot-rolled
Seamless. Hydrocarbon Processing Industry. Power Generation
Seamless Hydrocarbon Processing Industry Power Generation About Us Hydrocarbon Processing Industry (HPI) We cover the full range of steel grades for the Hydrocarbon Processing Industry, from carbon steel
20MnV6 / E470 Seamless tubes
EXPORT 20MnV6 / E470 Seamless tubes for the machining industry ODS It s no wonder with our wealth of experience, product and market knowledge we play a leading role in the Netherlands as stockholder of
(618) FAX (618)
All STEEL PRODUCTS, Inc. Steel Pipe 1/8 through 120 O.D. Mechanical Squares & Rectangulars 1/2 thru 4 Square Equal Rectangulars Structural Squares & Rectangulars 1-1/2 thru 16 Square Equal Rectangulars
FOR MILD STEEL APPLICATION
FOR MILD STEEL APPLICATION E-6010 E-6011 E-6013 HYUNDAI S-6010.D 1/8 x 14 3.2mm x 350mm 20 HYUNDAI S-6010.D 5/32 x 14 4.0mm x 350mm 20 E6011 3/32 x 14 2.6mm x 350mm 20 E6011 1/8 x 14 3.2mm x 350mm 20 E6011
SPECIFICATION AND GRADE YIELD EXT % TENSILE Y/T ELONG % (IN ) MIN: MAX: QT - QUENCH & TEMPERED SR - STRESS RELIEVED AR - AS ROLLED
DATE: 08/8/4 UNITED STATES STEEL CORPORATION TUBULAR S TIME: 07:5:58 CERTIFIED REPORT SERIAL NO: L005857 (IN ACCORDANCE WITH ISO 0474/EN004/DIN50049 "type.") MILL ORDER/ITEM NO SHIPPERS NO. P.O. NUMBER
SM - SUPER MACHINABILITY, the economical alternative!
SM - SUPER MACHINABILITY, the economical alternative! In the field of stainless steels, austenitic steels are considered difficult to machine. We have SM products in stock for you which were deliberately
For more than 45 years, our company has been committed to providing the global distributors community with innovative, high quality, cost effective
Brass For more than 45 years, our company has been committed to providing the global distributors community with innovative, high quality, cost effective brass products. From our humble beginnings in 1968,
@ - we deliver only quality goods as we care for nature REMI RATNAMANI SURAJ PRAKASH TUBACEX JFE STEEL CORPORATION WELSPUN DALMINE V & M BALCO NALCO
we deliver only quality goods as we care for nature AVAILABLE MATERIALS MAKES JINDAL STAINLESS LTD (JSL ) ARCELOR ACRONI DKC ACERINOX SUMITOMO METALS NIPPON BAW STEEL ISMT M. S. L. JINDAL SAW HINDALCO
SR 1280 / SD 477x Epoxy Resin Systems
SD 477x Page 1 / 1 Epoxy resin SR 128 : Epoxy matrix Without classified Toxic products (T) SD 477x Epoxy Resin Systems Hardeners SD 477x: Without classified Toxic products (T) SD 4775 : Intermediate, medium
Stainless steel, the most efficient, long-lasting and attractive product in the metallurgical sector
Stainless steel, the most efficient, long-lasting and attractive product in the metallurgical sector and innovation, the skill to develop a whole world of suggestions and novelties which provide a new
are graded into grades according to mean grading deviation of the nominal ball diameter in the lot D wm Balls
Rolling Elements Balls Balls as a rolling bearing component are made of the same material as bearing rings. The material hardness after processing (hardening) is 61 to 65 HRC. Balls with diameter = 3.175
Key Moved to the body of 11 th Edition Moved to a SR of 11 th Edition Removed on 11 th Edition
AI SC5 Ballot Submission Task Group on OCTG Work Item Number 2395 Title of Work Item Type of Distribution [Voting and Comment, Comment-only, Recirculation (comment resolution), Re-ballot] AI Document Modified
Index. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized...
Index Aluminum Angle... 69 Beams... 69 Channel... 69 Color / Painted... 74 Channel Bar... 3 Galvanized... 4 Junior... 4 Structural... 3-4 Expanded Metal... 70 Flats... 71 Pipe... 72 Plates... 73-74 Rounds...
TILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
LIST. Ningbo GC Bob Instrument Co., Ltd.
LIST A. All Stainless Steel Crimp Ring... 2 A1. All Stainless Steel Crimp Ring Back Mounting... 2 A1.1 All Stainless Steel Crimp Ring Back Mounting 1.5... 2 A1.2 All Stainless Steel Crimp Ring Flat Back
STEEL SOCKETS AND NIPPLES Product Catalogue
STEEL SOCKETS AND Product Catalogue SHANDONG S&C TIANGONG INDUSTRIAL CO.,LTD ADD: 9 Fuzhou Road, QingDao, CHINA TEL: 0086 532 85979331 FAX: 0086 532 85979332 E-MAIL: contact@scplumbing.cn Http://www.scplumbing.cn
per metre (Kg) 20mm 0.85
Dia Dia ROUND BAR machining 4 0.09 6 0. 8 0.9 6 0.26 2 0.4 9 6 0.4 8 0.4 6mm 0.4 6 0.6 4 0. 20mm 0.8 6 0.9 8.0. 8.4 4 2. 6 2.48 8 2.60 mm 2.6 2.09 40mm.2 8.6 4 4.2 8 4.8 2.49 2 8 6.20 2 4 6.9 2 8. 2 2
DAIKIN GAS TIGHT JOINT (DGT)
LINE UP Model Name Size (mm) DAIKIN GAS TIGHT JOINT (DGT) SPECIFICATIONS BDGTA06 ø 6.4 BDGTA06 ø 9.5 BDGTA12 ø 12.7 BDGTA15 ø 15.9 BDGTA19 ø 19.1 BDGTA22 ø 22.2 BDGTA28 ø 28.6 DAIKIN GAS TIGHT JOINT Applicable
SIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
PISTON SEALS BECA
PISTON SEALS BECA 500-502-504 DESCRIPTION The BECA 500-502 - 504 profiles are double acting composite piston seals composed of a filled PTFE friction ring and pre-tightened rubber O'Ring. They can be assembled
Index. E Expanded Metal Raised Flattened Grating... 93
Index A Aluminum Angle... 0 Channel... 07 Flat... 0 Hexagon... 0 Pipe... 0 Plate... 99 Round... 0 Sheet... 9 Square... 0 Tread Plate (Floor/Diamond Plate)... 00 Tube... 09 Angle Aluminum... 0 Bar Size...
TSA TEMPERATURE SWITCHES 15.13a
TSA TEMPERATURE SWITCHES 15.13a DESCRIPTION AND APPLICATION These temperature switches are designed for using as two-state controllers (ON/OFF type control). They compare the temperature set-point with
STEEL NIPPLES BLACK BRASS & GALVANIZED FITTINGSSCH 40
1/8" DIMETER STEEL NIPPLES BLCK BRSS & GLVNIZED SCH 40 Length Box/Case pprox. Galv 56-001 1.89 X Close (3/4") 5/600 0.02 57-001 1.34 56-002 1.95 x 1-1/2" 5/600 0.03 57-002 1.51 56-003 2.19 x 2" 5/600 0.04
Screw-in resistance thermometers with terminal head Form B
Data Sheet 90.2002 Page 1/7 s with terminal head Form B for temperatures from -50 to +600 C with replaceable measuring insert as single or twin resistance thermometer terminal head Form B, BUZ, BUZH, BBK
SEAMLESS HOT ROLLED TUBES
HELÉNS RÖR AB PRUCT RANGE SEAMLESS HOT ROLLED TUBES & HOLLOW BARS Product range SEAMLESS HOT ROLLED TUBES HEAVY WALL TUBES Seamless hot rolled steel tubes for construction, mechanical and general engineering
aluminium extrusions 2-8 stainlees steel bar and sections stainless steel seamless tube 24-25
contents aluminium extrusions 2-8 brass 9 - copper 4 - stainlees steel bar and sections 6-2 stainless steel seamless tube 24-2 stainless steel hygienic tube 26 stainless steel handrail tube 2 stainless
Throughout this section there are various icons to help you with your product selection. Diameter STEEL
Icons Throughout this section there are various icons to help you with your product selection. Ø Diaeter STEEL Index Aluiniu Tread Plate... 433 Angles... 25 Black Annealed Tying Wire... 30 Black PVC Coated
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15590-1 Second edition 2009-11-15 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends Industries
Socket Head Cap Screw Metric
1 2 0 0 M2 WRENCH 1.mm 11 1 1 1 1 21 0 Pcs 1, 0 0 0 00 00 00 00 00 00 00 00 WRENCH 2mm 11 1 1 1 0 Pcs 0 0 0 00 00 00 00 00 WRENCH 2.mm 21 002 11 00 00 1 0 01 21 002 000 0 Pcs 1 0 2 0 00 00 00 00 00 00
QUALITY PRODUCTS, COMPETITIVE PRICING AND SERVICE BEYOND YOUR EXPECTATIONS Phone (408) Fax (408)
Product Overview Vacuum Components & Bellows Pages 2-6 SSL NW/KF components are a system of stainless steel vacuum flanges for tube sizes from 3/4" through 2" OD. These flanges can operate in high vacuum
DISTRIBUTION SMS AC IER IN OXYDABLE - STAINLE SS STEEL SANITARY TUBES & FITTINGS FOR FOOD & LIFE SCIENCES
DISTRIUTION SMS C IER IN OXYDLE - STINLE SS STEEL SNITRY TUES & FITTINGS FOR FOOD & LIFE SCIENCES 3 DISTRIUTION CIER INOXYDLE - STINLESS STEEL Hygienic tubes & fittings for food & Life Sciences HOW SMS
E Q U I S T Silver for Windows
E Q U I S T Silver for Windows The Database of Standard Steels USER'S MANUAL SACIT Steel Advisory Centre Ltd. Budapest, 2003. 2 C O N T E N T S 1. INTRODUCTION.............................. 5 2. THE DATABASE..............................
Catalogue. electric-, cordless- and. pneumatic power tools. Products for sheet metal processing Edition 2008 / 2009
Catalogue electric-, cordless- and pneumatic power tools Products for sheet metal processing Edition 2008 / 2009 Machine Tools / Power Tools Laser Technology / Electronics Medical Technology TRUMPF nibblers:
Tech Tubes & Fittings. An ISO 9001: 2008 Company
Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges
Traceable 3D X-Ray Measurements ZEISS METROTOM
20 Traceable 3D X-Ray Measurements With a computer tomograph, you can successfully perform measuring and inspection jobs yourself with only one X-ray scan. The standard acceptance test, the precision engineering
Hardness Tester Micro-Vickers Type HM-100
Hardness Tester Micro-Vickers Type HM-100 Hardness tester according to ISO 6507 and JIS B7725. Micro-Vickers hardness tester with Vickers tests from HV 0.01 HV 1. Up to 3 objectives can be connected that
Standard Trackstar material. FDA/USDA approved material. Improved wear resistance and reduced thermal expansion Available in all colors except white
2 The Advantage Fight friction and reduce costs with long-wearing Trackstar UHMW Belt and Chain Guides. Available from stock, Fenner Drives offers the widest range of standard profiles for use in guiding
VAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES
VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Weight-loaded relief valves that protect tanks from damage or deformation, minimize emissions to the environment and loss of product due to evaporation FEATURES
Introduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B
Common grade: ASTM A36..min. 36,000 yield / min. 58,000 tensile. Size Weight (lbs.) Weight (lbs.)
Bar Size Angle Common grade: ASTM A36..min. 36,000 yield / min. 58,000 tensile Size Weight (lbs.) Weight (lbs.) A B C per Foot per 20' 1/2 x 1/2 x 1/8 0.38 7.6 5/8 x 5/8 x 1/8 0.48 9.6 3/4 x 3/4 x 1/8
RHM160. Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications. Features. Applications. Benefits
RHM160 Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications Features Standard Pressure ratings up to 50bar (725 psi) Temperature ratings from -196 to 120 C (-320 to 248 F) Mass flow
OPTIMIZATION OF MACHINING PARAMETER FOR TURNING OF EN 16 STEEL USING GREY BASED TAGUCHI METHOD
OPTIMIZATION OF MACHINING PARAMETER FOR TURNING OF EN 6 STEEL USING GREY BASED TAGUCHI METHOD P. Madhava Reddy, P. Vijaya Bhaskara Reddy, Y. Ashok Kumar Reddy and N. Naresh Department of Mechanical Engineering,
AUTOMATIC TENSION & COMPRESSION TESTING MACHINE
Product Code UTM-3000 Automatic 500 kn Tension and 1000 kn Compression Testing Machine Standards GENERAL PROPERTIES UTM-3000 automatic 500 kn tension and 1000 kn compression testing machine has been designed
Stainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.
Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
SIEVES 200mm.Ø x 50mm. STAINLESS STEEL FRAME
08 SIEVES 200mm.Ø x 50mm. STAINLESS STEEL FRAME *The test sieve is recommended by: ISO, UNE, DIN, AFNOR, BS *Suitable for wet sieving *Each sieve is marked with a serial number to ensure traceability *Delivered
PIPE SUPPORTS, ESLIN ANTI-NOISE & ANTI-VIBRATION SUPPORTING STUDBOLTS & FLANGE INSULATION
PIPE SUPPORTS, ESLIN ANTI-NOISE & ANTI-VIBRATION SUPPORTING STUDBOLTS & FLANGE INSULATION issue 2008A Esmat Engineering BV is an engineering and manufacturing company which produces the Eslin special flexible
DAMAGE INSPECTION AND EVALUATION IN THE WHOLE VIEW FIELD USING LASER
DAMAGE INSPECTION AND EVALUATION IN THE WHOLE VIEW FIELD USING LASER A. Kato and T. A. Moe Department of Mechanical Engineering Chubu University Kasugai, Aichi 487-8501, Japan ABSTRACT In this study, we
708 Series. Fractional Flow Control Valves. fractional flow control valves. CRN Registration Number Available
708 Series Fractional Flow Control s fractional flow control valves CRN Registration Number Available The Mark 708 was developed by Jordan to provide the most accurate control available for fractional
Cast Iron Valves. JIS 5K/10K, Class 125
Valves JIS K/K, Class STNDRD PRODUCTION RNGE Valve Type Nominal Pressure Fig. No. Construction (Note) Page Gate valves JIS K JIS K JIS K JIS K JIS K K Class Class Class Class FCM FCL FCLS FCLU FCWI FCHI
Vane wheel probe BFA25 for flow measurement of gases and liquids with integrated, configurable transducer UFA in Ex-d housing
Vane wheel probe BFA25 for flow measurement of gases and liquids with egrated, configurable transducer UFA in Ex-d housing Drawing 5 Vane wheel flow probe BFA25 (Dimensions see Page 3) Measurable variables
Temperature sensors and accessories for heat and cooling measurement points
Temperature sensors and accessories for heat and cooling measurement points Applications Temperature sensors are metrological components for heat or cold measuring points. They are used in pairs and measure
EDGE8 MTP Trunk Cable
The EDGE8 trunks utilise 8 -fibre push/pull optical connectors that are pinned on both ends of the cable. The trunks are shipped with strain -relief clips that allow for tool -less installation in EDGE8
3S 1 13,5 1/4 3013, /8 1/ ,2 3/8 3017, / ,3 1/2 4021,3
DIN 3015, Part 2 Components: Dimensions / Order Codes Clamp Body ød1 S 1 Clamp Body One clamp body is consisting of two clamp halves. Colour: reen Material code: PP Colour: Black Material code: PA (87
ENGLISH DATA SHEET - EURO
Euro The s 3 is a 1 axis (Y) tube for bending stainless steel, iron, copper or brass tubes or tubes in other special alloys up to 3 mm in diameter. The Euro s 3 model features automatic bending and manual
North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
... f l o w measurement & control...
... f l o w measurement & control... ELECTROMAGNETIC FLOWMETERS OPEN CHANNEL MAGNETIC FLOWMETER PARTLY FILLED PIPE MAGNETIC FLOWMETER VENTURI & PARSHALL FLUMES ULTRASONIC LEVEL MEASUREMENT ULTRASONIC OPEN
GRANULAR COMPUTING AND EVOLUTIONARY FUZZY MODELLING FOR MECHANICAL PROPERTIES OF ALLOY STEELS. G. Panoutsos and M. Mahfouf
GRANULAR COMPUTING AND EVOLUTIONARY FUZZY MODELLING FOR MECHANICAL PROPERTIES OF ALLOY STEELS G. Panoutsos and M. Mahfouf Institute for Microstructural and Mechanical Process Engineering: The University
Thermocouples Model TC200, for Additional Thermowell
Electrical Temperature Measurement Thermocouples Model TC200, for Additional Thermowell WIKA Data Sheet TE 65.10 Applications T Machinery, plant and tank construction T Energy and power plant technology
SURFACE ROUGHNESS TESTER TR100/110
SURFACE ROUGHNESS TESTER TR100/110 Pocket-size & economical price Large measuring range suitable for most materials Measures flat, outer cylinder and sloping surface Both Ra and Rz parameters in one instrument
DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 4 6587 (56) 699 054 www.icc es.org ESR 78 Reissued /07 This report is subject to renewal /09. DIVISION: 06 00 00 WOOD, PLASTICS
SCH 5S/10S/40S/80S. Stainless Steel/Carbon Steel Butt-welding Fittings
Stainless Steel/arbon Steel Butt-welding Fittings SH 5S/10S/40S/80S Ranged from equal and reduced tees, 45 and 90 elbows, concentric and eccentric reducers, to stub ends and caps, DIE ERSTE supplies a
V INLINE WELDING INLINE WELDING
SATF-40ND ø0,25'' - ø1,5'' ø6 - ø40 Technical Specifications - Water-cooled head - Dual-wing opening - Clamping jaws - stainless steel (1 kit per diameter) - Tungsten electrode specific to diameter - Motor
selection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
ENDF/B-VII.1 versus ENDFB/-VII.0: What s Different?
LLNL-TR-548633 ENDF/B-VII.1 versus ENDFB/-VII.0: What s Different? by Dermott E. Cullen Lawrence Livermore National Laboratory P.O. Box 808/L-198 Livermore, CA 94550 March 17, 2012 Approved for public
General Characteristics DM 80 Series - JIS Metric Tube
General haracteristics DM 80 Series - JIS Metric Tube Introduction Fitting Material Specifications K = Stainless Steel G = arbon Steel = opper Nickel 70/30 = opper Nickel 90/10 D = Duplex Z = Super Duplex
GRINNELL Figure 730 Mechanical Tees and Crosses Threaded / Grooved General Description. Technical Data. Page 1 of 8 JANUARY 2014 G210
Worldwide ontacts www.grinnell.com GRINNLL Figure 730 Mechanical s and es Threaded / General escription The GRINNLL Figure 730 Mechanical s provide an additional threaded or grooved outlet in existing
- The insufficient understanding of product handling and improper use could be the causes of accidents and losses in property. TEL:
DNGJIN WORKS #331 DONGGOKLI, SONGSNMYUN, DNGJINKUN, CHUNGNM, KORE TEL:+8413509114 SUNCHEON WORKS #9, SUNWOLRY, HERYONGMYEON, SUNCHEON, KORE TEL:+826174114 ULSN WORKS #265, YEOMPODONG, UKKU, ULSN, KORE
Thermal Mass Flowmeter Sensyflow FMT200-D
Data Sheet Thermal Mass Flowmeter Sensyflow FMT200-D Direct measurement of mass flow or standard volume flow of compressed air, nitrogen and biogas independent of media pressure and temperature Wide measuring
Insertion RTD temperature probe
Data sheet 902350 Page 1/6 For temperatures between -50 and +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measuring points Due
Optimization of Process Parameter for Surface Roughness in Drilling of Spheroidal Graphite (SG 500/7) Material
Optimization of Process Parameter for Surface Roughness in ing of Spheroidal Graphite (SG 500/7) Prashant Chavan 1, Sagar Jadhav 2 Department of Mechanical Engineering, Adarsh Institute of Technology and
Temperature sensors from ifm. Selection guide
Temperature sensors from ifm. Selection guide Temperature sensors www.ifm.com/us WARRANTY years on ifm products Systems for temperature monitoring The optimum solution for every requirement Compact temperature
3RG7 Opto-BERO Photoelectric Proximity Switches
Plastic fibre-optic conductors 0 0 30 20 0 Typical configuration of switching zones (fibre type 3RX7 003) TW = Sensing range TW (mm) NS3-22a 20 0 0 0 20 a(mm) a TW The plastic fibre-optic conductors are
TWIST DRILLS TWIST DRILLS
TWIST DRILLS Tool Type Standart Qual Ty Coating Page STRAIGHT SHAK ROLL FORGED STRAIGHT SHAK GROUD STRAIGHT SHAK LEFT HAD GORUD STRAIGHT SHAK SILVER SERIES STRAIGHT SHAK GOLD SERIES STRAIGHT SHAK TI COATED
Small Tensile Testers for universal usage Z3, Z5 Z10 Z20, Z50. page 1
Small Tensile Testers for universal usage Z3, Z5 Z10 Z20, Z50 page 1 Standard Machines for tension and compression made of massive Aluminum and stainless steel ball bearings and ball screws bellows to
Factory for oil sight glass fittings from Brass Aluminium Stainless steel
Factory for oil sight glass fittings from Brass Aluminium Stainless steel MECANOSOL, S.L. Pol. Ind. La Pañoleta c./ Julio de Torres, 14 29700 Vélez-Málaga SPAIN www.mecanosol.com info@mecanosol.com Tel.:
SECTION ANALYSIS PROGRAM RESPONSE 2000
SECTION ANALYSIS PROGRAM RESPONSE 2000 DESCRIPTION Response-2000 is a user friendly sectional analysis program that can be used to predict the complete load-deformation response of a reinforced or prestressed
THERMAL SHOCK CHAMBER
PAGE 1 Good engineering is a pre-requisite for reliability PAGE 2 PAGE 3 FEATURES & BENEFITS Test basket with specimen Compressor Motorised Movement Motorised movement of test basket Multi-pane vacuumed
D2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
Level sensor Magnetostrictive, high-resolution measuring principle Models FFG-P, FFG-T, FFG-TP, FLM-H
Level measurement Level sensor Magnetostrictive, high-resolution measuring principle Models FFG-P, FFG-T, FFG-TP, FLM-H KSR data sheet FFG-P, FFG-T, FFG-TP, FLM-H Applications High-accuracy level measurement
Rev/02/ Flared T (SAE J514) ube Fittings
Rev/02/2013 37 lared Tube ittings (SA J514) Introduction PANAM has been in the field of manufacturing precision Tube ittings and Instrumentation valves since the last Two decades. With a team of dedicated
Waterproof Bearings Designed for demanding environments
Waterproof Bearings Designed for demanding environments /// Flange bearings /// Pillow block bearings /// Solid housings /// Easy assembly Vill du veta mer ring: 019-12 77 96 /// USDA accepted /// Food
Normalization. Normal Forms. Normal Forms
Normalization A technique that organizes data attributes (or fields) such that they are grouped to form stable, flexible and adaptive entities. 5- Normal Forms First Normal Form (NF) There are no attributes
R-88 couplings should always be installed so that the coupling bolt pads make metal to metal contact.
R- O-01 MODEL R- RING JOINT COUPLING The Shurjot Model R- Rg Jot Couplg is an ideal pipe jog method when pipe is difficult to groove or when groovg is not the preferred jog method Available sizes to 9
DESIGNING FIBER OPTIC DYNAMIC RISER CABLES FOR OFFSHORE APPLICATIONS
DESIGNING FIBER OPTIC DYNAMIC RISER CABLES FOR OFFSHORE APPLICATIONS Jon Steinar Andreassen (Nexans Norway) Email: Nexans Norway AS, P.O Box 645 Etterstad, N-65 Oslo,
Simulation of AJWSP10033_FOLDED _ST_FR
Phone: 01922 453038 www.hyperon-simulation-and-cad-services.co.uk Simulation of AJWSP10033_FOLDED _ST_FR Date: 06 May 2017 Designer: Study name: AJWSP10033_FOLDED_STATIC Analysis type: Static Description
RIC PROGRAMMABLE INTELLIGENT CONTROLLER
Section F PROGRAMMABLE INTELLIGENT CONTROLLER intelligent controller is a new type of programmable controller. It is programmed by the use of a Function Block Diagram. The programming of is easier to learn
For Gear, Spline & Rack Manufacturing
For Gear, Spline & Rack Manufacturing INC Advanced Technologies for Gear, Spline and Rack Manufacturing Standard s for Spline Applications Gear Milling System Advantages Super Fast Machining At least 50%
Plate. Channels - Standard Structural* Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue.
Channels - Standard Structural* Grades Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue. A Depth B Flange Width C Web Thickness Estimated Weight - Lbs. Lbs/Foot
Wrought Iron Brochure
Wrought Iron Brochure Page 2 Spikes 9211 24mm 125x63mm 9212 26mm 140x70mm 9213 28mm 170x85mm 126/B/6 20mm 80x45mm 126/B/7 25mm 125x64mm 126/B/8 38mm 140x80mm 9543 13mm 133x59mm 9542 14mm 153x70mm 9541
Cable Marking System. Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Order from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA email: sales@mdmetric.com web: http://mdmetric.com Cable Marking System phones: (4)358-330 (800)638-830 faxes: (4)358-342 (800)872-9329 60
Level Measurement Continuous level measurement - Ultrasonic transducers
Overview transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing effect reduces blanking distance Optional foam
standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
Summary of the JAMA/JAPIA Standard Material Datasheet version upgrade (Ver.2.14)
1/14 Summary of the JAMA/JAPIA Standard Material Datasheet version upgrade (Ver.2.14) - This document is issued to supply information for JAMA/JAPIA Standard Material Datasheet version upgrade items. (Ver.2.14)
DWR REVISIONS NOTICE: THE INFORMATION AND DESIGN CONTAINED HEREIN IS THE PROPERTY OF TRANSTECTOR SYSTEMS. WHO RESERVES ALL
THIS DRWING HS BEEN GENERTED ND IS MINTINED BY CD SYSTEM. CHNGES SHLL ONLY BE INCORPORTED S DIRECTED BY THE DESIGN CTIVITY. LTR DESCRIPTION REVISIONS ECO NUM. DTE PPROVED PRODUCTION RELESE DD34889 MLH
FOR LIQUIDS AND SOLIDS
FOR LIQUIDS AND SOLIDS LEVEL SWITCHES VIBRATING FORK LEVEL SWITCHES O U R P R O F E S S I O N NIVOSWITCH VIBRATING FORK LEVEL SWITCHES MAIN FEATURES and mini compact type Rod extension up to 3 meters (10
FLEXIMARK Cable Marking Systems
Custom Plastic Marking Systems 598 UNITRONIC Bus Cables & Connectors MINI/MAXI Plastic Marking Systems 599 Print-Your-Own Plastic Marking Systems 607 Custom Stainless Steel Marking Systems 610 Stainless
ZE/ZV/ZV2/XE/XV/XV2. General-purpose Enclosed Switches with High Breaking Capacity and High Durability. Enclosed Switches. Model Number Structure
Enclosed Switches CSM_ZE_ZV_ZV2_XE_XV_XV2_DS_E_2_1 General-purpose Enclosed Switches with High Breaking Capacity and High Durability Z General-purpose Basic Switches are built into ZE, ZV, and ZV2 Switches.